Search Results

Search found 10998 results on 440 pages for 'mobile phone'.

Page 344/440 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

  • ISP Couldn't Verify My HFC MAC Id

    - by Ann Rahn
    An Internet Service Provider whom I used in the past, claims to provide me with Internet service. However, when I gave his technician the Hybrid Fiber - COX MAC ID on my Modem, he could not find it on his list. Also, the Internet Service Provider doesn't even have my current mailing address. All he has is my phone number and he is demanding payment. On the other hand, I use a cable service which provide TV. At this point, the Internet Service Provider is threatening to disconnect my Internet service. My question: How can I verify if I am getting the service from him or through the cable?

    Read the article

  • Laptop Toshiba Satelite M300 screen is completely blank.

    - by Nadia
    Hi, My laptop Toshiba satelite M300 Laptop screen is completely blacked out. It powers up and appears to be running but the screen is blank. I've taken battery pack off and back on again. Before the screen was blacked out, it used to flicker a bit. Also before it blacked out i was having problems with the internet and I was on phone to Internet provider who took me through steps to take my laptop back to a future date where it was operational. It then worked properly for a few days but then switched it on and screen was blank. It's more then a year old so out of warranty. Any suggestions on whether I should pay the $300 bucks to see if they can fix it?

    Read the article

  • Computer not booting, black screen, no beeps

    - by Michael Gaddass
    I bought a pre-owned computer on Ebay. It booted fine, had to reset due to it not detecting USB mouse, but it detected the USB keyboard. Booted fine again, then I tried to install Ubuntu Desktop, when it was installing I got a phone call, when I'm answering it, I find a Blue screen of Death. I reboot the computer and nothing, no BIOS boot, no beeping, but one of the fans was on. I opened the cover and found a large amount of dust, removed it, still not booting. I'm a complete novice with computer repairs, the most advanced thing I did was take a 286 harddrive and replace a 486's damaged harddrive with it (put the drive into the 486 that is), what could possibly be causing this?

    Read the article

  • Pausing a song in iTunes using the space bar no longer works after upgrade to Lion

    - by Snap Shot
    I used to be able to switch to iTunes using cmd-tab and press the space bar to pause a song as it was playing. This allowed me to to stop the song quickly when I was interrupted by a phone call. However, this no longer works. I can only go to the Controls menu item in iTunes and select Controls -- Pause. I do see that the menu item "Pause" is mapped to "space". When I press the space bar now with iTunes as the "active" application I just hear a tone. Recently I upgraded both Lion and iTunes so I am not quite sure which one stopped this from working properly. Does anyone know how to get this functionality back?

    Read the article

  • Exchange 2007 OWA not listening on SSL port

    - by krs1
    I have an Exchange 2007 server that went down after a power failure. It has OWA access via SSL both externally and internally. OWA is working fine from the internal notwork, however I am getting a timeout when I attempt to connect externally. I pulled up wireshark and noticed that the server actually redirects to SSL. For some reason the server is not listening on the SSL port, and this seems to be causing the timeout. I normally do only development work, but I'm stuck with this since my sysadmin took off for the week and isn't answering my phone calls. As far as I know it shouldn't be a firewall issue. Aside from me not wanting to work on the damn thing, what should I look for?

    Read the article

  • How can I force certain applications to use specific network connections?

    - by snicker
    Let's say I have two active network connections that let me out to the internet. I want certain applications to only use Network Connection 1, while some others should use Network Connection 2. Is this possible in Windows XP? If so, how can it be done? The main reason I wish to do this is I want to use a tethered phone's network for certain applications and an ethernet connection for others. Certain ports and networks are blocked by the ethernet connection, whereas they are not on my tethered phones connection.

    Read the article

  • Using the same local folder for Dropbox and Skydrive

    - by roryok
    Ever since I switched to windows phone I've sorely missed having an official dropbox app. Recently I've toyed with the idea of moving all my crucial files to SkyDrive instead. I have more storage on SkyDrive and the WP SkyDrive integration is very handy. I'm thinking about having both cloud sync services point to the same local folder for the first few weeks. That way if I want to go back its an easy task (and I can keep using dropbox's superior public folder) Has anyone else done this? Are there any potential issues (permissions, conflicts etc)

    Read the article

  • Remotely running batches on a Windows PC

    - by Eduardo León
    I want to remotely control my home desktop PC (running Windows 7 Professional), mainly to perform the following tasks: Downloading email attachments, and sending emails with attachments Running UI-less programs whose only inputs are files and whose only outputs are files So far, the only solution I have found is to use Remote Desktop to connect to my PC, but this is very slow and inefficient, especially when there is no fast Internet connection available other than my cell phone's. I would like to be able to send batch commands to my PC, like: Download an email attachment Use it as input for an UI-less program Save the program's output to a file Send that file to myself as an email attachment Is this possible? How could I do it?

    Read the article

  • Uploading to YouTube makes all browser tabs and devices disconnect

    - by fabsenet
    Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

    Read the article

  • Format Excel cells to display as '##:##:##'

    - by David Gard
    I'm trying to format cells in Excel so that they display the total duration of phone calls as hh:mm:ss, but Excel is giving me errors. Sometimes durations are only mm:ss (49:10), or even just ss (35), and I need them by default to change to 00:49:10 and 00:00:35 respectivly. However, when I select 'Custom' on the 'Number' tab when formatting the cells and enter either 00:00:00 or ##:##:##, Excel tells me - Microsoft Office Excel cannot use the number format you typed. Also, hh:mm:ss will not work for me, as I'm dealing in durations, not times. Is anyone able to tell me how do format this? Thanks.

    Read the article

  • Do I have a bad SD card?

    - by User1
    I'm trying to copy data from my computer to an SD card. After a few hundred megs, I keep getting the following errors in dmesg: [34542.836192] end_request: I/O error, dev mmcblk0, sector 855936 [34542.836284] FAT: unable to read inode block for updating (i_pos 13694981) [34542.836306] MMC: killing requests for dead queue [34542.836310] end_request: I/O error, dev mmcblk0, sector 9280 [34542.837035] FAT: unable to read inode block for updating (i_pos 148486) [34542.837062] MMC: killing requests for dead queue [34542.837066] end_request: I/O error, dev mmcblk0, sector 1 [34542.837074] FAT: bread failed in fat_clusters_flush [34542.837085] MMC: killing requests for dead queue These were all files I copied from a smaller SD card. I just want to transfer them to my new, larger card for my phone. I tried the same experiment with different files on a different machine and the card failed again. Reading data from the old card went fine. My systems are older and the new SD card is new (16GB Class 4). Could this be that my computers are too old? Is there a definitive test to verify if my SD card is bad?

    Read the article

  • How can I use Android as a remote control for streaming?

    - by michael
    I would like to know if I can use Android to remote control streaming on my laptop? I would like to use my laptop as my streaming server and use my HDTV to view the stream. And I need some way to remote control my streaming server. I have read about http://maketecheasier.com/install-vlc-shares-in-Ubuntu-and-stream-videos-to-Android/2011/02/25 and http://code.google.com/p/android-vlc-remote/ but those are streaming to Android phone itself. I am just need something to remote control streaming to my TV. Is that possible?

    Read the article

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

    - by Ace Paus
    I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

    Read the article

  • Can I use static routing to allow me to use my public IP from my LAN?

    - by jnm2
    I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

    Read the article

  • What options exist when the vendor does not supply an ADB driver for an Android device?

    - by STATUS_ACCESS_DENIED
    So I bought an Android phone and the vendor does not offer any drivers whatsoever. The Android SDK and the drivers that come with it don't seem to work with the device, but the device itself reports as Android 2.2.1. Other users have reported that the drivers of the Nook Color worked for them, but I cannot confirm this, after trying. What options do I have to connect to the device (and ultimately to root it)? Is it truly just the .inf file that I need to manipulate in order to make the device ID known to Windows? After all there are tools to figure out those strings while the device is connected (although "unknown") ...

    Read the article

  • Wi-Fi or Bluetooth to USB converter

    - by yerzhik
    Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

    Read the article

  • Is there a Google Authenticator desktop client?

    - by cwd
    I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

    Read the article

  • Cloud storage services offering one-time download links? [closed]

    - by TARehman
    Is anyone aware of consumer-targeted cloud storage services that allow users to generate a one-time download link for hosted files? Case in point: I have an encrypted container with some documents I need to send to a vendor. I would prefer to give them a one-time download link, so that I know when they have accessed the file, and then inform them of the passphrase by phone. I have heard that MediaFire offers 1-time links, but that they are buried in tons of advertising. At the moment, I'm not sure that I consider MediaFire fully legitimate; I'm more interested in solutions with Google Drive, Box.net, DropBox, etc.

    Read the article

  • One subdomain is not working

    - by BFTrick
    Hello there, My main domain works just fine - www.example.com and a subdomain set up by another developer works as well - sub1.example.com. But when I try to set another subdomain up I go through the process everything seems to work. The software creates the default files where the subdomain files should go. But when I try to browse there it doesn't work. My host uses Plesk to do all of the hosting stuff. What do you think the problem is? I doubt it is some sort of cache issue because I had problems on my phone which I tried after problems on the pc. Maybe for some reason Plesk needs time to set this up? I have used Cpanel before and that works instantly.

    Read the article

  • 56.6 Modem with CallerID

    - by Fuod
    Does anyone still know anything about the 56.6 modems? I'm looking for one that is easy to access via C#/VB.Net, has Caller ID and is either low-profile or USB. Also that neat little feature that lets the modem block the call from the phone (pass-through) until it has received the CallerID info would be really nice! Obviously I could just go to Best Buy and get what they have but I have no way of knowing how friendly it would be to write code for and I don't want to make multiple trips returning/exchanging etc. I'm not going to be doing anything with voice or voice mail, just recording the number from CallerID. Thanks!

    Read the article

  • How do I set up a proxy server for home with bandwidth control, download limit options?

    - by Quakeboy
    3 room mates share a single 2 Mbps connection. Have a 40GB per month download limit beyond which speed drops to 256Kbps which is annoying. One of the roommates abuses the connection by downloading beyond his quota limit. I have a Netgear WNR1000v2 Wireless router + ADSL Modem to connect to the internet. We all access internet via Wireless router which connects to ADSL Modem. I need a free proxy solution which can help me set 40GB / 3 (13 GB) limit for each person (every person has 2 devices - a PC and a phone with Wifi) Uniform Bandwidth control - when 2 people browse the internet they should get 1 Mbps each, and when 3 people access, they should get 2Mbps divided by 3. After each person crosses their monthly download limit, they should be able to access the internet with 256Kbps speed only or lesser. Can I have a custom firmware on my wireless router do this (or) Do I need a proxy server ? Please point me to any relevant tutorials (for example with Squid).

    Read the article

  • 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

    - by user12889
    I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

    Read the article

  • Problems with connecting to wireless network on windows 7

    - by Naveen
    I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

    Read the article

  • Windows 2012 Master & Ubuntu Bind 9 Slave & SOA

    - by RecentCoin
    I'm kinda like the maid... I don't do Windows. But thanks to new things we're implementing, I'm now attempting replicating a single zone from our AD cluster. We had this working just fine but someone had to "adjust" it. That broke the replication completely. We've gotten that restarted but now a different DC is showing as the SOA. Does it matter which of the domain controllers is listed as the SOA? The contents of the zone file appear to be correct. Part of me says "Good enough. Leave it be." but the rest of me doesn't want a 3AM phone call. So does anyone know if it matters which DC is listed as the SOA?

    Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >