Search Results

Search found 27870 results on 1115 pages for 'standard output'.

Page 342/1115 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• Node.js, Cygwin and Socket.io walk into a bar... Node.js throws ENOBUFS and everyone dies...

  - by A Wizard Did It

  I'm hoping someone here can help me out, I'm not having much luck figuring this out myself. I'm running node.js version 0.3.1 on Cygwin. I'm using Connect and Socket.io. I seem to be having some random problems with DNS or something, I haven't quite figured it out. The end result is that I the server is running fine, but when a browser attempts to connect to it the initial HTTP Request works, Socket.io connects, and then the server dies (output below). I don't think it has anything to do with the HTTP request because the server gets a lot data posted to it, and it was receiving requests and responding up until my connection that killed it. I've googled around and the closest thing I've found is DNS being set improperly. It's a network program meant to run only on an internal network, so I've set the nameserver x.x.x.x in my /etc/resolv.conf to the internal DNS. I've also added nameserver 8.8.8.8 in addition. I'm not sure what else to check, but would be grateful of any help. In node.exe.stackdump Exception: STATUS_ACCESS_VIOLATION at eip=610C51B9 eax=00000000 ebx=00000001 ecx=00000000 edx=00000308 esi=00000000 edi=010FCCB0 ebp=010FCAEC esp=010FCAC4 program=\\?\E:\cygwin\usr\local\bin\node.exe, pid 3296, thread unknown (0xBEC) cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B Stack trace: Frame Function Args 010FCAEC 610C51B9 (00000000, 00000000, 00000000, 00000000) 010FCBFC 610C5B55 (00000000, 00000000, 00000000, 00000000) 010FCCBC 610C693A (FFFFFFFF, FFFFFFFF, 750334F3, FFFFFFFE) 010FCD0C 61027CB2 (00000002, F4B994D5, 010FCE64, 00000002) 010FCD98 76306B59 (00000002, 010FCDD4, 763069A4, 00000002) End of stack trace Node Output: node.js:50 throw e; // process.nextTick error, or 'error' event on first tick ^ Error: ENOBUFS, No buffer space available at doConnect (net.js:642:19) at net.js:803:9 at dns.js:166:30 at IOWatcher.callback (dns.js:48:15) EDIT I'm hitting an LDAP server using http.createClient immediately after a client connects to get information, and that seems to be where the problem is that is causing ENOBUFS. I've edited the source to include && errno != ENOBUFS which now prevents the server from dying, however now the LDAP request isn't working. I'm not sure what the problem is that would cause that though. As I mentioned this is an internal only application, so I set the DNS servers in /etc/resolv.conf to the DNS servers that are being applied to the host machine. Not sure if this is part of the issue? EDIT 2 Here's some output from gdb --args ./node_g --debug ../myscript.js. I'm not sure if this is related to ENOBUFS, however, as it seems to be disconnecting immediately after connection with Socket.io [New thread 672.0x100] Error: dll starting at 0x76e30000 not found. Error: dll starting at 0x76250000 not found. Error: dll starting at 0x76e30000 not found. Error: dll starting at 0x76f50000 not found. [New thread 672.0xc90] [New thread 672.0x448] debugger listening on port 5858 [New thread 672.0xbf4] 14 Jan 18:48:57 - socket.io ready - accepting connections [New thread 672.0xed4] [New thread 672.0xd68] [New thread 672.0x1244] [New thread 672.0xf14] 14 Jan 18:49:02 - Initializing client with transport "websocket" assertion "b[1] == 0" failed: file "../src/node.cc", line 933, function: ssize_t node::DecodeWrite(char*, size_t, v8::Handle<v8::Value>, node::encoding) Program received signal SIGABRT, Aborted. 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll (gdb) backtrace #0 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll #1 0x7724f861 in ntdll!RtlUpdateClonedSRWLock () from /cygdrive/c/Windows/system32/ntdll.dll #2 0x75030816 in WaitForSingleObjectEx () from /cygdrive/c/Windows/syswow64/KernelBase.dll #3 0x0000035c in ?? () #4 0x00000000 in ?? () (gdb)

  Read the article

• retrieving value from database in java

  - by Akcire Atienza

  I am making AGAIN another program that retrieves the inputted data/values of fields from the database I created. but this time, my inputted value will be coming from the JtextField I created. I wonder what's wrong in here bec when I'm running it the output is always null. in this program i will convert the inputted value of my JTextField into int. here it is: public class ButtonHandler implements ActionListener { public void actionPerformed(ActionEvent e) { if(e.getSource() == extendB) { ExtensionForm extend = new ExtensionForm(); extend.setVisible(true); } else if(e.getSource()== searchB) { //get text from the textField String guest = guestIDTF.getText(); //parse the string to integer for retrieving of data int id = Integer.parseInt(guest); GuestsInfo guestInfo = new GuestsInfo(id); Room roomInfo = new Room(id); String labels[] = {guestInfo.getFirstName()+" "+guestInfo.getLastName(),""+roomInfo.getRoomNo(),roomInfo.getRoomType(),guestInfo.getTime(),"11:00"}; for(int z = 0; z<labels.length; z++) { labelDisplay[z].setText(labels[z]); } in my second class it retrieves the inputted values of fields from the database I created here's the code: import java.sql.*; public class Room { private String roomType; private int guestID, roomNo; private Connection con; private PreparedStatement statement; public Room(){ try { Class.forName("com.mysql.jdbc.Driver"); con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/3moronsdb","root",""); } catch (Exception e) { e.printStackTrace(); } } public Room(int guestsID) { this(); try{ statement = con.prepareStatement("SELECT * FROM guest WHERE guestID=?"); statement.setInt(1, guestID); ResultSet rs = statement.executeQuery(); while(rs.next()){ this.guestID = rs.getInt(1); this.roomType = rs.getString(2); this.roomNo = rs.getInt(3); } }catch(Exception e){ System.out.print(e); } } //Constructor for setting rate public Room(String roomType, int roomNo) { this(); try { statement = con.prepareStatement("Insert into room(roomType, roomNo) values(?,?)"); statement.setString(1, roomType); statement.setInt(2, roomNo); statement.executeUpdate(); } catch(Exception e) { e.printStackTrace(); return; } } //getting roomType public String getRoomType(){ return roomType; } //getting roomNo public int getRoomNo(){ return roomNo; } //getting guestID public int getGuestId(){ return guestID; } } i already insert some values in my 3moronsdb which are ( 1, Classic , 103). here's my TEST main class: public class TestMain { public static void main(String [] a){ GuestsInfo guest = new GuestsInfo(1); //note that this instantiation is the other class which i just ask the other day.. (http://stackoverflow.com/questions/12762835/retrieving-values-from-database-in-java) Room rum = new Room(1); System.out.print(rum.getRoomType()+" "+ guest.getFirstName()); } } when i'm running it it only gives me null output for the Room class but i am getting the output of the GuestsInfo class which is 'Ericka'. Can you help me guys? I know I ask this kind of problem yesterday but i really don't know what's wrong in here now..

  Read the article

• Merge DataGrid ColumnHeaders

  - by Vishal

  I would like to merge two column-Headers. Before you go and mark this question as duplicate please read further. I don't want a super-Header. I just want to merge two column-headers. Take a look at image below: Can you see two columns with headers Mobile Number 1 and Mobile Number 2? I want to show there only 1 column header as Mobile Numbers. Here is the XAML used for creating above mentioned dataGrid: <DataGrid Grid.Row="1" Margin="0,10,0,0" ItemsSource="{Binding Ledgers}" IsReadOnly="True" AutoGenerateColumns="False"> <DataGrid.Columns> <DataGridTextColumn Header="Customer Name" Binding="{Binding LedgerName}" /> <DataGridTextColumn Header="City" Binding="{Binding City}" /> <DataGridTextColumn Header="Mobile Number 1" Binding="{Binding MobileNo1}" /> <DataGridTextColumn Header="Mobile Number 2" Binding="{Binding MobileNo2}" /> <DataGridTextColumn Header="Opening Balance" Binding="{Binding OpeningBalance}" /> </DataGrid.Columns> </DataGrid> Update1: Update2 I have created a converter as follows: public class MobileNumberFormatConverter : IValueConverter { public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if (value != null && value != DependencyProperty.UnsetValue) { if (value.ToString().Length <= 15) { int spacesToAdd = 15 - value.ToString().Length; string s = value.ToString().PadRight(value.ToString().Length + spacesToAdd); return s; } return value.ToString().Substring(0, value.ToString().Length - 3) + "..."; } return ""; } public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { throw new NotImplementedException(); } } I have used it in XAML as follows: <DataGridTextColumn Header="Mobile Numbers"> <DataGridTextColumn.Binding> <MultiBinding StringFormat=" {0} {1}"> <Binding Path="MobileNo1" Converter="{StaticResource mobileNumberFormatConverter}"/> <Binding Path="MobileNo2" Converter="{StaticResource mobileNumberFormatConverter}"/> </MultiBinding> </DataGridTextColumn.Binding> </DataGridTextColumn> The output I got: Update3: At last I got the desired output. Here is the code for Converter: public class MobileNumberFormatConverter : IValueConverter { public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if (value != null && value != DependencyProperty.UnsetValue) { if (parameter.ToString().ToUpper() == "N") { if (value.ToString().Length <= 15) { return value.ToString(); } else { return value.ToString().Substring(0, 12); } } else if (parameter.ToString().ToUpper() == "S") { if (value.ToString().Length <= 15) { int spacesToAdd = 15 - value.ToString().Length; string spaces = ""; return spaces.PadRight(spacesToAdd); } else { return "..."; } } } return ""; } public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { throw new NotImplementedException(); } } Here is my XAML: <DataGridTemplateColumn Header="Mobile Numbers"> <DataGridTemplateColumn.CellTemplate> <DataTemplate> <TextBlock> <Run Text="{Binding MobileNo1, Converter={StaticResource mobileNumberFormatConverter}, ConverterParameter=N}" /> <Run Text="{Binding MobileNo1, Converter={StaticResource mobileNumberFormatConverter}, ConverterParameter=S}" FontFamily="Consolas"/> <Run Text=" " FontFamily="Consolas"/> <Run Text="{Binding MobileNo2, Converter={StaticResource mobileNumberFormatConverter}, ConverterParameter=N}" /> <Run Text="{Binding MobileNo2, Converter={StaticResource mobileNumberFormatConverter}, ConverterParameter=S}" FontFamily="Consolas"/> </TextBlock> </DataTemplate> </DataGridTemplateColumn.CellTemplate> </DataGridTemplateColumn> Output:

  Read the article

• How can I make the storage of C++ lambda objects more efficient?

  - by Peter Ruderman

  I've been thinking about storing C++ lambda's lately. The standard advice you see on the Internet is to store the lambda in a std::function object. However, none of this advice ever considers the storage implications. It occurred to me that there must be some seriously black voodoo going on behind the scenes to make this work. Consider the following class that stores an integer value: class Simple { public: Simple( int value ) { puts( "Constructing simple!" ); this->value = value; } Simple( const Simple& rhs ) { puts( "Copying simple!" ); this->value = rhs.value; } Simple( Simple&& rhs ) { puts( "Moving simple!" ); this->value = rhs.value; } ~Simple() { puts( "Destroying simple!" ); } int Get() const { return this->value; } private: int value; }; Now, consider this simple program: int main() { Simple test( 5 ); std::function<int ()> f = [test] () { return test.Get(); }; printf( "%d\n", f() ); } This is the output I would hope to see from this program: Constructing simple! Copying simple! Moving simple! Destroying simple! 5 Destroying simple! Destroying simple! First, we create the value test. We create a local copy on the stack for the temporary lambda object. We then move the temporary lambda object into memory allocated by std::function. We destroy the temporary lambda. We print our output. We destroy the std::function. And finally, we destroy the test object. Needless to say, this is not what I see. When I compile this on Visual C++ 2010 (release or debug mode), I get this output: Constructing simple! Copying simple! Copying simple! Copying simple! Copying simple! Destroying simple! Destroying simple! Destroying simple! 5 Destroying simple! Destroying simple! Holy crap that's inefficient! Not only did the compiler fail to use my move constructor, but it generated and destroyed two apparently superfluous copies of the lambda during the assignment. So, here finally are the questions: (1) Is all this copying really necessary? (2) Is there some way to coerce the compiler into generating better code? Thanks for reading!

  Read the article

• Java File I/O problems

  - by dwwilson66

  This is my first time working with file i/o in java, and it's not working. The section of the program where I parse individual lines and output a semicolon delimited line works like a charm when I hardcode a file and display on screen. Whne I try to write to a file public static OutputStream... errors out as an illegal start to expression, and I've been unable to get the program to step through an entire directory of files instead of one at a time. Where I'm not clear: I'm note setting an output filename anywhere...whare am I supposed to do that? The path variable won't pass. What's the proper format for a path? Can anyone see what I need to debug here? import java.io.*; public class FileRead { public static void main(String args[]) { try { // Open the file(s) // single file works OK FileInputStream fstream = new FileInputStream("testfile.txt"); Path startingDir = R:\Data\cs\RoboHelp\CorrLib\Output\Production\WebHelp; PrintFiles pf = new PrintFiles(); Files.walkFileTree(startingDir, pf); // Get the object of DataInputStream DataInputStream in = new DataInputStream(fstream); BufferedReader br = new BufferedReader(new InputStreamReader(in)); String inputLine; String desc = ""; String docNo = ""; String replLtr = ""; String specCond = ""; String states = ""; String howGen = ""; String whenGen = ""; String owner = ""; String lastChange = ""; //Read File Line By Line while ((inputLine = br.readLine()) != null) { int testVal=0; int stringMax = inputLine.length(); // if(inputLine.startsWith("Description")) {desc = inputLine.substring(13,inputLine.length());} else if(inputLine.startsWith("Reference Number")) {docNo = inputLine.substring(20,inputLine.length());} else if(inputLine.startsWith("Replaces Letter")) {replLtr = inputLine.substring(17,inputLine.length());} else if(inputLine.startsWith("Special Conditions")) {specCond = inputLine.substring(21,inputLine.length());} else if(inputLine.startsWith("States Applicable")) {states = inputLine.substring(19,inputLine.length());} else if(inputLine.startsWith("How Generated")) {howGen = inputLine.substring(15,inputLine.length());} else if(inputLine.startsWith("When Generated")) {whenGen = inputLine.substring(16,inputLine.length());} else if(inputLine.startsWith("Owner")) {owner = inputLine.substring(7,inputLine.length());} else if(inputLine.startsWith("Last Change Date")) {lastChange = inputLine.substring(17,inputLine.length());} } //close while loop // Print the content on the console String outStr1 = (desc + ";" + docNo + ";" + replLtr + ";" + specCond + ";" + states); String outStr2 = (";" + howGen + ";" + whenGen + ";" + owner + ";" + lastChange); String outString = (outStr1 + outStr2); System.out.print(inputLine + "\n" + outString); String lineItem = (outStr1+outStr2); // try (OutputStream out = new BufferedOutputStream (logfile.newOutputStream(CREATE, APPEND))) { out.write(lineItem, 0, lineItem.length); } catch (IOException x) { System.err.println(x); } public static OutputStream newOutputStream() throws IOException { // append to an existing file, create file if it doesn't initially exist out = Files.newOutputStream(c:, CREATE, APPEND); } //Close the input stream in.close(); } catch (Exception e) { //Catch exception if any System.err.println("Error: " + e.getMessage()); } } }

  Read the article

• REST WCF service locks thread when called using AJAX in an ASP.Net site

  - by Jupaol

  I have a WCF REST service consumed in an ASP.Net site, from a page, using AJAX. I want to be able to call methods from my service async, which means I will have callback handlers in my javascript code and when the methods finish, the output will be updated. The methods should run in different threads, because each method will take different time to complete their task I have the code semi-working, but something strange is happening because the first time I execute the code after compiling, it works, running each call in a different threads but subsequent calls blocs the service, in such a way that each method call has to wait until the last call ends in order to execute the next one. And they are running on the same thread. I have had the same problem before when I was using Page Methods, and I solved it by disabling the session in the page but I have not figured it out how to do the same when consuming WCF REST services Note: Methods complete time (running them async should take only 7 sec and the result should be: Execute1 - Execute3 - Execute2) Execute1 -- 2 sec Execute2 -- 7 sec Execute3 -- 4 sec Output After compiling Output subsequent calls (this is the problem) I will post the code...I'll try to simplify it as much as I can Service Contract [ServiceContract( SessionMode = SessionMode.NotAllowed )] public interface IMyService { // I have other 3 methods like these: Execute2 and Execute3 [OperationContract] [WebInvoke( RequestFormat = WebMessageFormat.Json, ResponseFormat = WebMessageFormat.Json, UriTemplate = "/Execute1", Method = "POST")] string Execute1(string param); } [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior( InstanceContextMode = InstanceContextMode.PerCall )] public class MyService : IMyService { // I have other 3 methods like these: Execute2 (7 sec) and Execute3(4 sec) public string Execute1(string param) { var t = Observable.Start(() => Thread.Sleep(2000), Scheduler.NewThread); t.First(); return string.Format("Execute1 on: {0} count: {1} at: {2} thread: {3}", param, "0", DateTime.Now.ToString(), Thread.CurrentThread.ManagedThreadId.ToString()); } } ASPX page <%@ Page EnableSessionState="False" Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="RestService._Default" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> <script type="text/javascript"> function callMethodAsync(url, data) { $("#message").append("<br/>" + new Date()); $.ajax({ cache: false, type: "POST", async: true, url: url, data: '"de"', contentType: "application/json", dataType: "json", success: function (msg) { $("#message").append("<br/>&nbsp;&nbsp;&nbsp;" + msg); }, error: function (xhr) { alert(xhr.responseText); } }); } $(function () { $("#callMany").click(function () { $("#message").html(""); callMethodAsync("/Execute1", "hello"); callMethodAsync("/Execute2", "crazy"); callMethodAsync("/Execute3", "world"); }); }); </script> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <input type="button" id="callMany" value="Post Many" /> <div id="message"> </div> </asp:Content> Web.config (relevant) <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> Global.asax void Application_Start(object sender, EventArgs e) { RouteTable.Routes.Ignore("{resource}.axd/{*pathInfo}"); RouteTable.Routes.Add(new ServiceRoute("", new WebServiceHostFactory(), typeof(MyService))); }

  Read the article

• JDBC Lock a row using SELECT FOR UPDATE, doesn't work

  - by Rachid

  I am having issues with MySQL's SELECT .. FOR UPDATE, here is the query I am trying to run: SELECT * FROM tableName WHERE HostName='UnknownHost' ORDER BY UpdateTimestamp asc limit 1 FOR UPDATE After this, the concerned thread will do an UPDATE and change the HostName, which is then it should unlock the row. I am running a multi-threaded java application, so 3 threads are running this SQL statement, but when thread 1 runs this, it doesn't lock its results from thread 2 & 3. Therefore threads 2 & 3 are getting the same results and they could update the same row. Also each thread is on its own mysql connection. I'm using Innodb, with transaction-isolation = READ-COMMITTED, and the Autocommit is off before executing the select for update may I miss something? OR perhaps there is a better solution? Thanks a lot. Code : public BasicJDBCDemo() { Le_Thread newThread1=new Le_Thread(); Le_Thread newThread2=new Le_Thread(); newThread1.start(); newThread2.start(); } Thread : class Le_Thread extends Thread { public void run() { tring name = Thread.currentThread().getName(); System.out.println( name+": Debut."); long oid=Util.doSelectLockTest(name); Util.doUpdateTest(oid,name); } } Select : public static long doSelectLockTest(String threadName) { System.out.println("[OUTPUT FROM SELECT Lock ]...threadName="+threadName); PreparedStatement pst = null; ResultSet rs=null; Connection conn=null; long oid=0; try { String query = "SELECT * FROM table WHERE Host=? ORDER BY Timestamp asc limit 1 FOR UPDATE"; conn=getNewConnection(); pst = conn.prepareStatement(query); pst.setString(1, DbProperties.UnknownHost); System.out.println("pst="+threadName+"__"+pst); rs = pst.executeQuery(); if (rs.first()) { String s = rs.getString("HostName"); oid = rs.getLong("OID"); System.out.println("oid_oldest/host/threadName=="+oid+"/"+s+"/"+threadName); } } catch (SQLException ex) { ex.printStackTrace(); } finally { DBUtil.close(pst); DBUtil.close(rs); DBUtil.close(conn); } return oid; } Please help.... : Result : Thread-1: Debut. Thread-2: Debut. [OUTPUT FROM SELECT Lock ]...threadName=Thread-1 New connection.. [OUTPUT FROM SELECT Lock ]...threadName=Thread-2 New connection.. pst=Thread-2: SELECT * FROM b2biCheckPoint WHERE HostName='UnknownHost' ORDER BY UpdateTimestamp asc limit 1 FOR UPDATE pst=Thread-1: SELECT * FROM b2biCheckPoint WHERE HostName='UnknownHost' ORDER BY UpdateTimestamp asc limit 1 FOR UPDATE oid_oldest/host/threadName==1/UnknownHost/Thread-2 oid_oldest/host/threadName==1/UnknownHost/Thread-1 [Performing UPDATE] ... oid = 1, thread=Thread-2 New connection.. [Performing UPDATE] ... oid = 1, thread=Thread-1 pst_threadname=Thread-2: UPDATE b2bicheckpoint SET HostName='1_host_Thread-2',UpdateTimestamp=1294940161838 where OID = 1 New connection.. pst_threadname=Thread-1: UPDATE b2bicheckpoint SET HostName='1_host_Thread-1',UpdateTimestamp=1294940161853 where OID = 1

  Read the article

• Two functions working but not when I put them together

  - by Error_404

  I'm really new to C(I have been learning Cuda and wanted to learn C so I can run everything together instead of generating data in Java/Python and copy/pasting it manually to my Cuda program to play with). I am trying to open a large file(20+gb) and parse some data but because I was having problems I decided to try to break down my problem first to verify I can open and read line by line a file and then in another file take a sample of the output of a line and try to parse it, then if all goes well I can simply bring them together. I managed(after a bit of a struggle) to get each part working but when I combine them together it doesn't work(I tried in both eclipse & QT creator. QT creator says it exited unexpectedly and eclipse just stops..). Here's the parsing part(it works exactly as I want): #include <string.h> #include <stdio.h> int main() { char line[1024] = "[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 4],"; size_t len = strlen(line); memmove(line, line+1, len-3); line[len-3] = 0; printf("%s \n",line); char str[100], *s = str, *t = NULL; strcpy(str, line); while ((t = strtok(s, " ,")) != NULL) { s = NULL; printf(":%s:\n", t); } return 0; } The data in variable line is exactly as I get if I print each line of a file. But when I copy/paste it into my main program then it doesn't work(QT shows nothing and eclipse just shows the first line). This code is just a few file IO commands that are wrapped around the commands above(everything within the while loop is the exact same as above) #include <stdio.h> #include <stdlib.h> int main() { char line[1024]; FILE *fp = fopen("/Users/me/Desktop/output.txt","r"); printf("Starting.. \n"); int count = 0; int list[30]; //items will be stored here while(fgets(line, 1024, fp) != NULL){ count++; //char line[1024] = "[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 4],"; size_t len = strlen(line); memmove(line, line+1, len-3); line[len-3] = 0; printf("%s \n",line); char str[100], *s = str, *t = NULL; strcpy(str, line); while ((t = strtok(s, " ,")) != NULL) { s = NULL; printf(":%s:\n", t); } } printf(" num of lines is %i \n", count); return 0; } eclipse output: Starting.. 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 4 I can't figure out what I'm doing wrong. I'm using a mac with gcc 4.2, if that helps. The only thing I can think of is maybe I'm doing something wrong the way I parse the list variable so its not accessible later on(I'm not sure its a wild guess). Is there anything I'm missing?

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• find substring and indices in mips

  - by ccc

  im trying find out substring and first occurrence indices. but something wrong. im comparing each element of pattern array and each element of string array until pointer reach to '\0'. and if any characater found it keep in temp array. and increasing pointers +1. whats the problem. algorithm is totaly wrong ? #Note: $v0 is a symbolic name used by the assember for $2. # $a0 is a symbolic name used by the assember for $4. .data prompt_str: .asciiz "Please type a text string: " prompt_ptr: .asciiz "Please type a pattern string: " print_yes: .asciiz "Yes, there is a match." print_no: .asciiz "No, there is no match." text_str: .asciiz "Text string : " pattern_str: .asciiz "Pattern string : " print_out: .asciiz "Output to be produced :" print_dash: .asciiz "----------------------" print_index: .asciiz "Starting index :" print_msg : .asciiz "Length of longest partial match = " nl: .asciiz "\n" str : .space 81 ptr : .space 81 tmp : .space 81 .text main: la $a0, prompt_str li $v0, 4 #print_string command. syscall la $a0,str #read string li $a1,81 li $v0,8 syscall la $t0,str #move string to $t0 la $a0,prompt_ptr li $v0,4 #print pattern command syscall la $a0,ptr #read pattern li $a1,81 li $v0,8 syscall la $t1,ptr #move pattern to $t1 la $t5,tmp #move temp to $t5 lb $t2,0($t0) #pointer first element array of string lb $t3,0($t1) #pointer first element array of pattern lb $t6,0($t5) #pointer first element array of temp loop : beq $t3,$0,end_loop beq $t2,$t3,match addiu $t0,$t0,1 j loop match : move $t6,$t2 addiu $t5,$t5,1 addiu $t0,$t0,1 addiu $t1,$t1,1 j print_match print_match : la $a0,text_str #print string li $v0,4 syscall move $a0,$t0 li $v0,4 syscall la $a0,nl #print newline character li $v0,4 syscall la $a0,pattern_str #print pattern string li $v0,4 syscall move $a0,$t1 li $v0,4 syscall la $a0,nl #print newline character li $v0,4 syscall la $a0,print_out #print output line and newline character li $v0,4 syscall la $a0,nl li $v0,4 syscall la $a0,print_dash li $v0,4 syscall la $a0,print_yes li $v0,4 syscall la $a0,print_index #print starting index li $v0,4 syscall li $v0,10 syscall end_loop : li $v0,10 syscall

  Read the article

• The data reader returned by the store data provider does not have enough columns

  - by molgan

  Hello I get the following error when I try to execute a stored procedure: "The data reader returned by the store data provider does not have enough columns" When I in the sql-manager execute it like this: DECLARE @return_value int, @EndDate datetime EXEC @return_value = [dbo].[GetSomeDate] @SomeID = 91, @EndDate = @EndDate OUTPUT SELECT @EndDate as N'@EndDate' SELECT 'Return Value' = @return_value GO It returns the value properly.... @SomeDate = '2010-03-24 09:00' And in my app I have: if (_entities.Connection.State == System.Data.ConnectionState.Closed) _entities.Connection.Open(); using (EntityCommand c = new EntityCommand("MyAppEntities.GetSomeDate", (EntityConnection)this._entities.Connection)) { c.CommandType = System.Data.CommandType.StoredProcedure; EntityParameter paramSomeID = new EntityParameter("SomeID", System.Data.DbType.Int32); paramSomeID.Direction = System.Data.ParameterDirection.Input; paramSomeID.Value = someID; c.Parameters.Add(paramSomeID); EntityParameter paramSomeDate = new EntityParameter("SomeDate", System.Data.DbType.DateTime); SomeDate.Direction = System.Data.ParameterDirection.Output; c.Parameters.Add(paramSomeDate); int retval = c.ExecuteNonQuery(); return (DateTime?)c.Parameters["SomeDate"].Value; Why does it complain about columns? I googled on error and someone said something about removing RETURN in sp, but I dont have any RETURN there. last like is like SELECT @SomeDate = D.SomeDate FROM .... /M

  Read the article

• perl Client-SSL-Warning: Peer certificate not verified

  - by Jeremey

  I am having trouble with a perl screenscraper to an HTTPS site. In debugging, I ran the following: print $res->headers_as_string; and in the output, I have the following line: Client-SSL-Warning: Peer certificate not verified Is there a way I can auto-accept this certificate, or is that not the problem? #!/usr/bin/perl use LWP::UserAgent; use Crypt::SSLeay::CTX; use Crypt::SSLeay::Conn; use Crypt::SSLeay::X509; use LWP::Simple qw(get); my $ua = LWP::UserAgent->new; my $req = HTTP::Request->new(GET => 'https://vzw-cat.sun4.lightsurf.net/vzwcampaignadmin/'); my $res = $ua->request($req); print $res->headers_as_string; output: Cache-Control: no-cache Connection: close Date: Tue, 01 Jun 2010 19:28:08 GMT Pragma: No-cache Server: Apache Content-Type: text/html Expires: Wed, 31 Dec 1969 16:00:00 PST Client-Date: Tue, 01 Jun 2010 19:28:09 GMT Client-Peer: 64.152.68.114:443 Client-Response-Num: 1 Client-SSL-Cert-Issuer: /O=VeriSign Trust Network/OU=VeriSign, Inc./OU=VeriSign International Server CA - Class 3/OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign Client-SSL-Cert-Subject: /C=US/ST=Massachusetts/L=Boston/O=verizon wireless/OU=TERMS OF USE AT WWW.VERISIGN.COM/RPA (C)00/CN=PSMSADMIN.VZW.COM Client-SSL-Cipher: DHE-RSA-AES256-SHA Client-SSL-Warning: Peer certificate not verified Client-Transfer-Encoding: chunked Link: <css/vtext_style.css>; rel="stylesheet"; type="text/css" Set-Cookie: JSESSIONID=DE6C99EA2F3DD1D4DF31456B94F16C90.vz3; Path=/vzwcampaignadmin; Secure Title: Verizon Wireless - Campaign Administrator

  Read the article

• logparser not matching on a LIKE pattern

  - by user79339

  Hi I seem to have the strangest problem. I am using logparser to search an event log for some text that I know is there (i copied and pasted the string from the event into the sql search string). But the sql LIKE statement is returning a empty results. But other LIKE statments seem to be working file. I have even tried using two '%' symbols in case the shell was trying to replace the search pattern with an environment variable '%%NavigationOccuredEventHandler%%', escaping the % with a \ and with a ' but all these just give me "No valid LIKE mask" error My logparser command - C:\Program Files\Log Parser 2.2LogParser.exe "select * from D:\Temp\07i132ppa1_app.evt where Message like '%NavigationOccuredEventHandler%' " -i:EVT -o:Datagrid The Entry in event log (found using "Select * from D:\Temp\07i132ppa1_app.evt" and doing a copy paste of relevant row) - 'D:\Temp\07i132ppa1_app.evt 5976788 2010-03-09 11:53:23 2010-03-09 11:53:23 2 1 Error event 0 None ICP Timestamp: 9/03/2010 1:53:23 AM Message: Error # 068464030040-07I132PPA1 System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not set to an instance of an object. at ClientRegistration.Controller.ContactDetailsController.NavigationOccuredEventHandler(Object sender, NavigateEventArgs e) at Microsoft.ApplicationBlocks.UIProcess.UIPManager.NavigateEventHandler.Invoke(Object sender, NavigateEventArgs e) at Microsoft.ApplicationBlocks.UIProcess.UIPManager.InvokeEventHandlers(State state) in . . . Truncated for brevity ' output Statistics: Elements processed: 240993 Elements output: 0 Execution time: 59.47 seconds But if i searched for the pattern '%object reference not set%' it works fine, returns results. I copied and pasted the string into a dummy sql table and ran the sql query there and it works fine. Just doesn't seem to work in logparser. Very baffling. Any help would be much appreciated

  Read the article

• Serialize cookie collection

  - by user313421

  Hello guys My scenario is to store all client cookies as XML file and make the exact "cookie collection" later from this file. So, How to serialize/Deserialize a "cookie collection" in asp.net ? Does "multivalued" cookies need extra considerations rather than standard collection serialization ? Thanks for your time

  Read the article

• VHDL - Problem with std_logic_vector

  - by wretrOvian

  Hi, i'm coding a 4-bit binary adder with accumulator: library ieee; use ieee.std_logic_1164.all; entity binadder is port(n,clk,sh:in bit; x,y:inout std_logic_vector(3 downto 0); co:inout bit; done:out bit); end binadder; architecture binadder of binadder is signal state: integer range 0 to 3; signal sum,cin:bit; begin sum<= (x(0) xor y(0)) xor cin; co<= (x(0) and y(0)) or (y(0) and cin) or (x(0) and cin); process begin wait until clk='0'; case state is when 0=> if(n='1') then state<=1; end if; when 1|2|3=> if(sh='1') then x<= sum & x(3 downto 1); y<= y(0) & y(3 downto 1); cin<=co; end if; if(state=3) then state<=0; end if; end case; end process; done<='1' when state=3 else '0'; end binadder; The output : -- Compiling architecture binadder of binadder ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(15): No feasible entries for infix operator "xor". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(15): Type error resolving infix expression "xor" as type std.standard.bit. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): No feasible entries for infix operator "and". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in right operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): No feasible entries for infix operator "and". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in left operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in right operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Type error resolving infix expression "or" as type std.standard.bit. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(28): No feasible entries for infix operator "&". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(28): Type error resolving infix expression "&" as type ieee.std_logic_1164.std_logic_vector. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(39): VHDL Compiler exiting I believe i'm not handling std_logic_vector's correctly. Please tell me how? :(

  Read the article

• Android NDK Gaussian Blur radius stuck at 60

  - by rennoDeniro

  I implemented this NDK imeplementation of a Gaussian Blur, But I am having problems. I cannot increase the radius above 60, otherwise the activity just closes returning to a previous activity. No error message, nothing? Does anyone know why this could be? Note: This blur is based on the quasimondo implementation, here #include <jni.h> #include <string.h> #include <math.h> #include <stdio.h> #include <android/log.h> #include <android/bitmap.h> #define LOG_TAG "libbitmaputils" #define LOGI(...) __android_log_print(ANDROID_LOG_INFO,LOG_TAG,__VA_ARGS__) #define LOGE(...) __android_log_print(ANDROID_LOG_ERROR,LOG_TAG,__VA_ARGS__) typedef struct { uint8_t red; uint8_t green; uint8_t blue; uint8_t alpha; } rgba; JNIEXPORT void JNICALL Java_com_insert_your_package_ClassName_functionToBlur(JNIEnv* env, jobject obj, jobject bitmapIn, jobject bitmapOut, jint radius) { LOGI("Blurring bitmap..."); // Properties AndroidBitmapInfo infoIn; void* pixelsIn; AndroidBitmapInfo infoOut; void* pixelsOut; int ret; // Get image info if ((ret = AndroidBitmap_getInfo(env, bitmapIn, &infoIn)) < 0 || (ret = AndroidBitmap_getInfo(env, bitmapOut, &infoOut)) < 0) { LOGE("AndroidBitmap_getInfo() failed ! error=%d", ret); return; } // Check image if (infoIn.format != ANDROID_BITMAP_FORMAT_RGBA_8888 || infoOut.format != ANDROID_BITMAP_FORMAT_RGBA_8888) { LOGE("Bitmap format is not RGBA_8888!"); LOGE("==> %d %d", infoIn.format, infoOut.format); return; } // Lock all images if ((ret = AndroidBitmap_lockPixels(env, bitmapIn, &pixelsIn)) < 0 || (ret = AndroidBitmap_lockPixels(env, bitmapOut, &pixelsOut)) < 0) { LOGE("AndroidBitmap_lockPixels() failed ! error=%d", ret); } int h = infoIn.height; int w = infoIn.width; LOGI("Image size is: %i %i", w, h); rgba* input = (rgba*) pixelsIn; rgba* output = (rgba*) pixelsOut; int wm = w - 1; int hm = h - 1; int wh = w * h; int whMax = max(w, h); int div = radius + radius + 1; int r[wh]; int g[wh]; int b[wh]; int rsum, gsum, bsum, x, y, i, yp, yi, yw; rgba p; int vmin[whMax]; int divsum = (div + 1) >> 1; divsum *= divsum; int dv[256 * divsum]; for (i = 0; i < 256 * divsum; i++) { dv[i] = (i / divsum); } yw = yi = 0; int stack[div][3]; int stackpointer; int stackstart; int rbs; int ir; int ip; int r1 = radius + 1; int routsum, goutsum, boutsum; int rinsum, ginsum, binsum; for (y = 0; y < h; y++) { rinsum = ginsum = binsum = routsum = goutsum = boutsum = rsum = gsum = bsum = 0; for (i = -radius; i <= radius; i++) { p = input[yi + min(wm, max(i, 0))]; ir = i + radius; // same as sir stack[ir][0] = p.red; stack[ir][1] = p.green; stack[ir][2] = p.blue; rbs = r1 - abs(i); rsum += stack[ir][0] * rbs; gsum += stack[ir][1] * rbs; bsum += stack[ir][2] * rbs; if (i > 0) { rinsum += stack[ir][0]; ginsum += stack[ir][1]; binsum += stack[ir][2]; } else { routsum += stack[ir][0]; goutsum += stack[ir][1]; boutsum += stack[ir][2]; } } stackpointer = radius; for (x = 0; x < w; x++) { r[yi] = dv[rsum]; g[yi] = dv[gsum]; b[yi] = dv[bsum]; rsum -= routsum; gsum -= goutsum; bsum -= boutsum; stackstart = stackpointer - radius + div; ir = stackstart % div; // same as sir routsum -= stack[ir][0]; goutsum -= stack[ir][1]; boutsum -= stack[ir][2]; if (y == 0) { vmin[x] = min(x + radius + 1, wm); } p = input[yw + vmin[x]]; stack[ir][0] = p.red; stack[ir][1] = p.green; stack[ir][2] = p.blue; rinsum += stack[ir][0]; ginsum += stack[ir][1]; binsum += stack[ir][2]; rsum += rinsum; gsum += ginsum; bsum += binsum; stackpointer = (stackpointer + 1) % div; ir = (stackpointer) % div; // same as sir routsum += stack[ir][0]; goutsum += stack[ir][1]; boutsum += stack[ir][2]; rinsum -= stack[ir][0]; ginsum -= stack[ir][1]; binsum -= stack[ir][2]; yi++; } yw += w; } for (x = 0; x < w; x++) { rinsum = ginsum = binsum = routsum = goutsum = boutsum = rsum = gsum = bsum = 0; yp = -radius * w; for (i = -radius; i <= radius; i++) { yi = max(0, yp) + x; ir = i + radius; // same as sir stack[ir][0] = r[yi]; stack[ir][1] = g[yi]; stack[ir][2] = b[yi]; rbs = r1 - abs(i); rsum += r[yi] * rbs; gsum += g[yi] * rbs; bsum += b[yi] * rbs; if (i > 0) { rinsum += stack[ir][0]; ginsum += stack[ir][1]; binsum += stack[ir][2]; } else { routsum += stack[ir][0]; goutsum += stack[ir][1]; boutsum += stack[ir][2]; } if (i < hm) { yp += w; } } yi = x; stackpointer = radius; for (y = 0; y < h; y++) { output[yi].red = dv[rsum]; output[yi].green = dv[gsum]; output[yi].blue = dv[bsum]; rsum -= routsum; gsum -= goutsum; bsum -= boutsum; stackstart = stackpointer - radius + div; ir = stackstart % div; // same as sir routsum -= stack[ir][0]; goutsum -= stack[ir][1]; boutsum -= stack[ir][2]; if (x == 0) vmin[y] = min(y + r1, hm) * w; ip = x + vmin[y]; stack[ir][0] = r[ip]; stack[ir][1] = g[ip]; stack[ir][2] = b[ip]; rinsum += stack[ir][0]; ginsum += stack[ir][1]; binsum += stack[ir][2]; rsum += rinsum; gsum += ginsum; bsum += binsum; stackpointer = (stackpointer + 1) % div; ir = stackpointer; // same as sir routsum += stack[ir][0]; goutsum += stack[ir][1]; boutsum += stack[ir][2]; rinsum -= stack[ir][0]; ginsum -= stack[ir][1]; binsum -= stack[ir][2]; yi += w; } } // Unlocks everything AndroidBitmap_unlockPixels(env, bitmapIn); AndroidBitmap_unlockPixels(env, bitmapOut); LOGI ("Bitmap blurred."); } int min(int a, int b) { return a > b ? b : a; } int max(int a, int b) { return a > b ? a : b; }

  Read the article

• Book recommendation for moving from Delphi 6 to Delphi 2010

  - by Snackmoore

  Hi, I am a long time Delphi 6 developer. Looking for a book on Delphi 2010. Not only on the new features available in Delphi 2010, but more importantly, guideline on how different it is to develop applications in Delphi 2010, the architecture, standard and convention, etc. Thanks a lot.

  Read the article

• Undefined control sequence

  - by Jelle Fresen

  Hi, I am making my Master's Thesis with LaTeX, but I can't get the provided style to work. Specifically, I get the error 'Undefined control sequence' when using the function makeformaltitlepages, which is defined in mscthesis.sty. On the internet, the only answer I could find is the straightforward 'you probably made a typo', or 'you probably forgot to include the package', but I have reason to believe neither of those apply to me. I am quite sure that the function exists, for when I add a little verification, using the @ifundefined command, the logfile shows that the function actually does exist. And, as can be seen in the following piece of code, I also include the package: \usepackage{mscthesis} % setup information like author, company, title, etc. \begin{document} \formatmatter \thispagestyle{empty} \maketitle \makeatletter \@ifundefined{makeformaltitlepages}{\message{Function is not defined.}}{\message{Function is defined.}} \makeatother \makeformaltitlepages{\input{abstract}} % add chapters, sections, etc. and end the document Now, the output shows the line "Function is defined." just before the output of maketitle (which I think is rather strange on its own, but that might be a flushing issue), followed by the following infinitely repeated error (well, cut off after 100 times by LaTeX): Function is defined. // some gibberish about font info ! Undefined control sequence. \GenericError ... #4 \errhelp \@err@ ... l.112 \makeformaltitlepages{} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. While the error keeps repeating, the line that starts with '#4' cycles between the following four lines: #4 \errhelp \@err@ ... \let \@err@ ... \@empty \def \MessageBreak... \endgroup Ok, so, do any of you have a suggestion of how I might continue to hunt this bug? Or what blatantly obvious mistake did I make?

  Read the article

• JQGrid tree - passing additional parameters when tree is expanded

  - by PHP thinker

  I have a JQGRid tree. It loads data click by click, not all at once. Typically, JQGRid passes 4 standard tree parameters with each call - row (level, parent, is leaf, is expanded). How can I pass more parameters that I will take from the row being expanded? E.g. data from Name column should be passed in AJAX call too. There doesn't seem to be OnExpand event or similar.

  Read the article

• How to customize / style a UIPopoverController

  - by Thomas Joos

  hi dudes, I'm working on an iPad application and I'm using UIPopoverControllers. I'm at the part where the app needs to be branded and styled and i'm wondering how to change the color / tint of the UIPopoverController? Standard is dark blue but it needs to be another color.. is this possible? Greets, Thomas

  Read the article

• How to add custom SOAP-Header element to the generated WSDL in Spring-WS

  - by Petr Macek

  Hi, we are migrating from WebLogic web-services to Spring-WS (1.5.X). There is currently one issue we are facing: We need to pass a context object (on WLS it is passed as SOAP-Header element) to other services that are still running on WLS from the Spring-WS powered service. The header element is still formulated on client side and the newly created WS (Spring-WS) should just pass it to other services. I can imagine how the custom element would be passed: override the doWithMessage(WebServiceMessage message) method... Is there a way to generate the wsdl with the help of DefaultWsdl11Definition to contain that custom header element? See the example: <wsdl:operation name="GetSomeInformation"> <soap:operation soapAction="http://www.dummyservice.com/InformationService/GetSomeInformation" /> <wsdl:input> <soap:body use="literal" /> <soap:header message="ctx:ServiceContextMessage" part="serviceContext" use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> <wsdl:fault name="Error"> <soap:fault name="Error" use="literal" /> </wsdl:fault> </wsdl:operation> Thanks for help

  Read the article

• Python, unit test - Pass command line arguments to setUp of unittest.TestCase

  - by sberry2A

  I have a script that acts as a wrapper for some unit tests written using the Python unittest module. In addition to cleaning up some files, creating an output stream and generating some code, it loads test cases into a suite using unittest.TestLoader().loadTestsFromTestCase() I am already using optparse to pull out several command-line arguments used for determining the output location, whether to regenerate code and whether to do some clean up. I also want to pass a configuration variable, namely an endpoint URI, for use within the test cases. I realize I can add an OptionParser to the setUp method of the TestCase, but I want to instead pass the option to setUp. Is this possible using loadTestsFromTestCase()? I can iterate over the returned TestSuite's TestCases, but can I manually call setUp on the TestCases? ** EDIT ** I wanted to point out that I am able to pass the arguments to setUp if I iterate over the tests and call setUp manually like: (options, args) = op.parse_args() suite = unittest.TestLoader().loadTestsFromTestCase(MyTests.TestSOAPFunctions) for test in suite: test.setUp(options.soap_uri) However, I am using xmlrunner for this and its run method takes a TestSuite as an argument. I assume it will run the setUp method itself, so I would need the parameters available within the XMLTestRunner. I hope this makes sense.

  Read the article

• MSBuild Script and VS2010 publish apply Web.config Transform

  - by Jason

  So, I have VS 2010 installed and am in the process of modifying my MSBuild script for our TeamCity build integration. Everything is working great with one exception. How can I tell MSBuild that I want to apply the Web.conifg transform files that I've created when I publish the build... I have the following which produces the compiled web site but, it outputs a Web.config, Web.Debug.config and, Web.Release.config files (All 3) to the compiled output directory. In studio when I perform a publish to file system it will do the transform and only output the Web.config with the appropriate changes... <Target Name="CompileWeb"> <MSBuild Projects="myproj.csproj" Properties="Configuration=Release;" /> </Target> <Target Name="PublishWeb" DependsOnTargets="CompileWeb"> <MSBuild Projects="myproj.csproj" Targets="ResolveReferences;_CopyWebApplication" Properties="WebProjectOutputDir=$(OutputFolder)$(WebOutputFolder); OutDir=$(TempOutputFolder)$(WebOutputFolder)\;Configuration=Release;" /> </Target> Any help would be great..! I know this can be done by other means but I would like to do this using the new VS 2010 way if possible

  Read the article

• Xdebug: remote debugging won't stop at breakpoints

  - by Bryan M.

  I'm having a problem with xdebug not stopping at breakpoints when using remote debugging (everything is fine when running scripts via the command line). It will break at the first line of the program, then exit, not catching any breakpoints. It used to work fine, until I switched over to using MacPorts for Apache and PHP. I've tried re-compiling it serveral times (with several versions), but no dice. I'm using PHP 5.3.1 and Xdebug 2.1.0-beta3 I've also tried at least 3 different debugging programs (MacGDBp, Netbeans and JetBrains Web IDE). My php.ini settings look like: [xdebug] xdebug.remote_enable=1 xdebug.remote_handler=dbgp xdebug.remote_mode=req xdebug.remote_port=9000 xdebug.remote_host=localhost xdebug.idekey=webide And when I log the debugger output, setting a breakpoint looks like this/; <- breakpoint_set -i 895 -t line -f file:///Users/WM_imac/Sites/wm/debug_test.php -n 13 -s enabled -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="breakpoint_set" transaction_id="895" state="enabled" id="890660002"></response> When run, the debugger will get the context of the first line of the application, then send the detach and stop messages. However, this line is output when starting the debugger. <- feature_get -i 885 -n breakpoint_types -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get" transaction_id="885" feature_name="breakpoint_types" supported="1"><![CDATA[line conditional call return exception]]></response> Does 'line conditional call return exception' mean anything?

  Read the article

• JavaMail not sending Subject or From under jetty:run-war

  - by Jason Thrasher

  Has anyone seen JavaMail not sending proper MimeMessages to an SMTP server, depending on how the JVM in started? At the end of the day, I can't send JavaMail SMTP messages with Subject: or From: fields, and it appears other headers are missing, only when running the app as a war. The web project is built with Maven and I'm testing sending JavaMail using a browser and a simple mail.jsp to debug and see different behavior when launching the app with: 1) mvn jetty:run (mail sends fine, with proper Subject and From fields) 2) mvn jetty:run-war (mail sends fine, but missing Subject, From, and other fields) I've meticulously run diff on the (verbose) Maven debug output (-X), and there are zero differences in the runtime dependencies between the two. I've also compared System properties, and they are identical. Something else is happening the jetty:run-war case that changes the way JavaMail behaves. What other stones need turning? Curiously, I've tried a debugger in both situations and found that the javax.mail.internet.MimeMessage instance is getting created differently. The webapp is using Spring to send email picked off of an Apache ActiveMQ queue. When running the app as mvn jetty:run the MimeMessage.contentStream variable is used for message content. When running as mvn jetty:run-war, the MimeMessage.content variable is used for the message contents, and the content = ASCIIUtility.getBytes(is); call removes all of the header data from the parsed content. Since this seemed very odd, and debugging Spring/ActiveMQ is a deep dive, I created a simplified test without any of that infrastructure: just a JSP using mail-1.4.2.jar, yet the same headers are missing. Also of note, these headers are missing when running the WAR file under Tomcat 5.5.27. Tomcat behaves just like Jetty when running the WAR, with the same missing headers. With JavaMail debugging turned on, I clearly see different output. GOOD CASE: In the jetty:run (non-WAR) the log output is: DEBUG: JavaMail version 1.4.2 DEBUG: successfully loaded resource: /META-INF/javamail.default.providers DEBUG: Tables of loaded providers DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]} DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]} DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc] DEBUG SMTP: useEhlo true, useAuth true DEBUG SMTP: trying to connect to host "mail.authsmtp.com", port 465, isSSL false 220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/Kp; Thu, 18 Jun 2009 01:35:24 +0100 (BST) DEBUG SMTP: connected to host "mail.authsmtp.com", port: 465 EHLO jmac.local 250-mail.authsmtp.com Hello sul-pubs-3a.Stanford.EDU [171.66.201.2], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 52428800 250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "SIZE", arg "52428800" DEBUG SMTP: Found extension "AUTH", arg "CRAM-MD5 DIGEST-MD5 LOGIN PLAIN" DEBUG SMTP: Found extension "DELIVERBY", arg "" DEBUG SMTP: Found extension "HELP", arg "" DEBUG SMTP: Attempt to authenticate DEBUG SMTP: check mechanisms: LOGIN PLAIN DIGEST-MD5 AUTH LOGIN 334 VXNlcm5hjbt7 YWM0MDkwhi== 334 UGFzc3dvjbt7 YXV0aHNtdHAydog3 235 2.0.0 OK Authenticated DEBUG SMTP: use8bit false MAIL FROM:<[email protected]> 250 2.1.0 <[email protected]>... Sender ok RCPT TO:<[email protected]> 250 2.1.5 <[email protected]>... Recipient ok DEBUG SMTP: Verified Addresses DEBUG SMTP: Jason Thrasher <[email protected]> DATA 354 Enter mail, end with "." on a line by itself From: Webmaster <[email protected]> To: Jason Thrasher <[email protected]> Message-ID: <[email protected]> Subject: non-Spring: Hello World MIME-Version: 1.0 Content-Type: text/plain;charset=UTF-8 Content-Transfer-Encoding: 7bit Hello World: message body here . 250 2.0.0 n5I0ZOkD085654 Message accepted for delivery QUIT 221 2.0.0 mail.authsmtp.com closing connection BAD CASE: The log output when running as a WAR, with missing headers, is quite different: Loading javamail.default.providers from jar:file:/Users/jason/.m2/repository/javax/mail/mail/1.4.2/mail-1.4.2.jar!/META-INF/javamail.default.providers DEBUG: loading new provider protocol=imap, className=com.sun.mail.imap.IMAPStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=imaps, className=com.sun.mail.imap.IMAPSSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtp, className=com.sun.mail.smtp.SMTPTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtps, className=com.sun.mail.smtp.SMTPSSLTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3, className=com.sun.mail.pop3.POP3Store, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3s, className=com.sun.mail.pop3.POP3SSLStore, vendor=Sun Microsystems, Inc, version=null Loading javamail.default.providers from jar:file:/Users/jason/Documents/dev/subscribeatron/software/trunk/web/struts/target/work/webapp/WEB-INF/lib/mail-1.4.2.jar!/META-INF/javamail.default.providers DEBUG: loading new provider protocol=imap, className=com.sun.mail.imap.IMAPStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=imaps, className=com.sun.mail.imap.IMAPSSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtp, className=com.sun.mail.smtp.SMTPTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtps, className=com.sun.mail.smtp.SMTPSSLTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3, className=com.sun.mail.pop3.POP3Store, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3s, className=com.sun.mail.pop3.POP3SSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: getProvider() returning provider protocol=smtp; type=javax.mail.Provider$Type@98203f; class=com.sun.mail.smtp.SMTPTransport; vendor=Sun Microsystems, Inc DEBUG SMTP: useEhlo true, useAuth false DEBUG SMTP: trying to connect to host "mail.authsmtp.com", port 465, isSSL false 220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/Kp; Thu, 18 Jun 2009 01:51:46 +0100 (BST) DEBUG SMTP: connected to host "mail.authsmtp.com", port: 465 EHLO jmac.local 250-mail.authsmtp.com Hello sul-pubs-3a.Stanford.EDU [171.66.201.2], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 52428800 250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "SIZE", arg "52428800" DEBUG SMTP: Found extension "AUTH", arg "CRAM-MD5 DIGEST-MD5 LOGIN PLAIN" DEBUG SMTP: Found extension "DELIVERBY", arg "" DEBUG SMTP: Found extension "HELP", arg "" DEBUG SMTP: Attempt to authenticate DEBUG SMTP: check mechanisms: LOGIN PLAIN DIGEST-MD5 AUTH LOGIN 334 VXNlcm5hjbt7 YWM0MDkwhi== 334 UGFzc3dvjbt7 YXV0aHNtdHAydog3 235 2.0.0 OK Authenticated DEBUG SMTP: use8bit false MAIL FROM:<[email protected]> 250 2.1.0 <[email protected]>... Sender ok RCPT TO:<[email protected]> 250 2.1.5 <[email protected]>... Recipient ok DEBUG SMTP: Verified Addresses DEBUG SMTP: Jason Thrasher <[email protected]> DATA 354 Enter mail, end with "." on a line by itself Hello World: message body here . 250 2.0.0 n5I0pkSc090137 Message accepted for delivery QUIT 221 2.0.0 mail.authsmtp.com closing connection Here's the actual mail.jsp that I'm testing war/non-war with. <%@page import="java.util.*"%> <%@page import="javax.mail.internet.*"%> <%@page import="javax.mail.*"%> <% InternetAddress from = new InternetAddress("[email protected]", "Webmaster"); InternetAddress to = new InternetAddress("[email protected]", "Jason Thrasher"); String subject = "non-Spring: Hello World"; String content = "Hello World: message body here"; final Properties props = new Properties(); props.setProperty("mail.transport.protocol", "smtp"); props.setProperty("mail.host", "mail.authsmtp.com"); props.setProperty("mail.port", "465"); props.setProperty("mail.username", "myusername"); props.setProperty("mail.password", "secret"); props.setProperty("mail.debug", "true"); props.setProperty("mail.smtp.auth", "true"); props.setProperty("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory"); props.setProperty("mail.smtp.socketFactory.fallback", "false"); Session mailSession = Session.getDefaultInstance(props); Message message = new MimeMessage(mailSession); message.setFrom(from); message.setRecipient(Message.RecipientType.TO, to); message.setSubject(subject); message.setContent(content, "text/plain;charset=UTF-8"); Transport trans = mailSession.getTransport(); trans.connect(props.getProperty("mail.host"), Integer .parseInt(props.getProperty("mail.port")), props .getProperty("mail.username"), props .getProperty("mail.password")); trans.sendMessage(message, message .getRecipients(Message.RecipientType.TO)); trans.close(); %> email was sent SOLUTION: Yes, the problem was transitive dependencies of Apache CXF 2. I had to exclude geronimo-javamail_1.4_spec from the build, and just rely on javax's mail-1.4.jar. <dependency> <groupId>org.apache.cxf</groupId> <artifactId>cxf-rt-frontend-jaxws</artifactId> <version>2.2.6</version> <exclusions> <exclusion> <groupId>org.apache.geronimo.specs</groupId> <artifactId>geronimo-javamail_1.4_spec</artifactId> </exclusion> </exclusions> </dependency> Thanks for all of the answers.

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >