Search Results

Search found 19299 results on 772 pages for 'off topic'.

Page 343/772 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• server dosnt produce syn-ack

  - by steve

  I have a small program that take packets from the nfqueue . change the ip.dst to my server dst (and ttl), recalc checksum and return the packet to the nfqueue. The server and the client are linux and apache web server is run on the server and listen on port 80. i open telnet in the client to fake ip on port 80 . the packet is changed by my program and sent to the server, but the target server (the new dst ip) get the syn , but dosnt generate syn-ack (the server also belong to me , so i can see that it get the syn with checksum correct , but dosnt generate syn-ack). if i do the same , but with the real server ip as the dest, the tcp handshake is done correct (in this case i just change the ttl and checksum. The change that i did to the ttl is just a test to see that my checksum calc is ok). i compare the sys's , but didnt find and difference. Any idea? Ps. i saw this topic : Server not sending a SYN/ACK packet in response to a SYN packet and i set all flags the same , but this didnt help. Thank you

  Read the article

• Mac Mavericks, ngircd localhost works, private IP doesn't

  - by user221945

  I have configured ngircd to listen on my private ip address. It doesn't. Localhost works fine. Configuration test: ngIRCd 21-IDENT+IPv6+IRCPLUS+SSL+SYSLOG+TCPWRAP+ZLIB-x86_64/apple/darwin13.2.0 Copyright (c)2001-2013 Alexander Barton () and Contributors. Homepage: http://ngircd.barton.de/ This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Reading configuration from "/opt/local/etc/ngircd.conf" ... OK, press enter to see a dump of your server configuration ... [GLOBAL] Name = irc.bellbookandpistol.com AdminInfo1 = Jaedreth AdminInfo2 = San Diego County CA, US AdminEMail = [email protected] HelpFile = /opt/local/share/doc/ngircd/Commands.txt Info = Server Info Text Listen = 10.0.1.5,127.0.0.1 MotdFile = MotdPhrase = "Welcome to irc.bellbookandpistol.com" Password = PidFile = Ports = 6667 ServerGID = wheel ServerUID = root [LIMITS] ConnectRetry = 60 IdleTimeout = 0 MaxConnections = 0 MaxConnectionsIP = 6 MaxJoins = -1 MaxNickLength = 9 MaxListSize = 0 PingTimeout = 120 PongTimeout = 20 [OPTIONS] AllowedChannelTypes = #&+ AllowRemoteOper = no ChrootDir = CloakHost = CloakHostModeX = CloakHostSalt = kBih5mu\kVI!DC6eifT(hd4m/0'zb/=: CloakUserToNick = no ConnectIPv4 = yes ConnectIPv6 = no DefaultUserModes = DNS = yes IncludeDir = /opt/local/etc/ngircd.conf.d MorePrivacy = no NoticeAuth = no OperCanUseMode = no OperChanPAutoOp = yes OperServerMode = no RequireAuthPing = no ScrubCTCP = no SyslogFacility = local5 WebircPassword = [SSL] CertFile = CipherList = HIGH:!aNULL:@STRENGTH DHFile = KeyFile = KeyFilePassword = Ports = [OPERATOR] Name = [REDACTED] Password = [REDACTED] Mask = [CHANNEL] Name = #BBP Modes = tnk Key = MaxUsers = 0 Topic = Welcome to the Bell, Book and Pistol IRC Server! KeyFile = As you can see, it should be listening on 10.0.1.5, but it isn't. After turning on Apache manually, port 80 works on 10.0.1.5, but port 6667 doesn't. It only works on localhost. Is there some terminal command I could use or some config file I could edit to get this to work?

  Read the article

• Trouble in Nginx hotlink protection

  - by Ayaz Malik

  I am trying to implement image hotlink protection problem in nginx and I need help. I have a huge issue of my site's images being submitted to social networks like StumbleUpon with a direct link like http://example.com/xxxxx.jpg Which sometimes gets huge traffic and increases CPU usage and bandwidth usage. I want to block direct access to my images from other referrers and protect them from being hotlinked. Here is the code from my vhost.conf server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } For hotlink protection I added this code location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } This is the current nginx code for this domain, but it didn't work: server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } How can I fix this?

  Read the article

• Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

  - by Xtend

  Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

  Read the article

• How to enable hotlink protection without hardcoding my domain in the Apache config file?

  - by Jeff

  Been surfing around for a solution for a couple days now. How do I enable Apache hotlink protection without hardcoding my domain in the config file so I can port the code to my other domains without having to update the config file every time? This is what I have so far: RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://www\.example\.com [NC] RewriteRule \.(gif|ico|jpe|jpeg|jpg|png)$ - [NC,F,L] ... And this is what Apache suggests: SetEnvIf Referer example\.com localreferer <FilesMatch \.(jpg|png|gif)$> Order deny,allow Deny from all Allow from env=localreferer </FilesMatch> ... both of which hardcode the domain in their rules. The closest I came to finding any info that covers this is right here on ServerFault, but the conclusion was that it cannot be done. Based on my research, that appears to be true, but I didn't find any questions or commentary dedicated soley to this question. If anyone's curious, here is the link to the Apache 2 docs that cover this topic. Note that Apache variables (e.g. %{HTTP_REFERER}) can only be used in the RewriteCond text-string and the RewriteRule substitution arguments.

  Read the article

• batch file to deploy files

  - by Martin Michalak

  hi I have created batch file which pulls info from *.txt file and deploy code from the source to destination: SET Source=%1 if exist %Source% ( ECHO Source for WEB exists ) else ( ECHO Wrong build%Source% doesn't exist GOTO Menu ) SET Server=%2 SET AppPool=%3 SET Destination=%4 SET Folder=%5 SET ENV=%6 SET AppName=%7 SET Envlog=%8 ECHO Deployment of WEB > %Envlog% %Date% %Time% echo. @ECHO Stopping App Pools @ECHO Stopping App Pools >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE -d \\%Server% cmd.exe /c c:\windows\system32\inetsrv\appcmd STOP apppool /apppool.name:%AppPool% echo. @ECHO App Pools will be stopped in the background @ECHO App Pools will be stopped in the background >> %Envlog% %Date% %Time% Pause echo. IF EXIST "%Destination%" ( ECHO Deleting %AppName% %Folder% RMDIR %Destination% /s /q ECHO Destination Folder %Folder% Deleted ECHO Destination Folder %Folder% Deleted >> %Envlog% %Date% %Time% ) else ( ECHO Destination Folder %Destination% does not exist, please check ECHO Destination Folder %Destination% does not exist, please check >> %Envlog% %Date% %Time% Pause ) echo. @ECHO Starting Robocopy for %AppName% @ECHO Starting Robocopy for %AppName% >> %Envlog% %Date% %Time% echo. START /WAIT /MIN ROBOCOPY.EXE %Source% %Destination% *.* /S /NP /R:3 /W:5 /LOG:"Logs\Robo%AppName%%ENV%.log" D:\Tools\Windiff\windiff.exe %Source% %Destination% echo. @ECHO Finished with Robocopy @ECHO Finished with Robocopy >> %Envlog% %Date% %Time% echo. @ECHO Checking if App pools stopped: @ECHO Checking if App pools stopped: >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE \\%Server% c:\windows\system32\inetsrv\appcmd LIST apppool /apppool.name:%AppPool% @echo off set /p ask=All app pools stopped? (y/n) if %ask%==y (echo Great, please continue with deployemnt) else echo Before continuing please check why app pools did not stop @echo App pools stopped?: %ask% >> %Envlog% %Date% %Time% DEL %Source%\web.config echo. @ECHO Production Config check if exist "%Destination%\%ENV%-Web.config" ( echo. ECHO The Application production configuration file does exist. ECHO The Application production configuration file does exist. >> %Envlog% %Date% %Time% COPY %Destination%\%ENV%-Web.config web.config echo. ECHO Production %ENV%-Web.config has been renamed to web.config ECHO Production %ENV%-Web.config has been renamed to web.config >> %Envlog% %Date% %Time% ) else ( ECHO The Application production configuration file is missing in Production %AppName% ECHO The Application production configuration file is missing in Production %AppName% >> %Envlog% %Date% %Time% explorer %Destination% Pause ) echo. @ECHO Confirm that configs were renamed correclty, if yes please hit any key to START APP Pools @ECHO Confirm that configs were renamed correclty, if yes please hit any key to START APP Pools >> %Envlog% %Date% %Time% Pause echo. @ECHO Start %AppName% Application Pool >> %Envlog% %Date% %Time% D:\ICTTools\PSEXEC.EXE \\%Server% c:\windows\system32\inetsrv\appcmd START apppool /apppool.name:%AppPool% @echo off set /p ask=All app pools started? (y/n) if %ask%==y (echo Great, please continue with deployemnt) else echo Before continuing please check why app pools did not start @echo App pools started?: %ask% >> %Envlog% %Date% %Time% Pause echo. @ECHO Build Version for %AppName% @ECHO Build Version for %AppName% >> %Envlog% %Date% %Time% type %Destination%\buildinfo.xml echo. ECHO ............................................... @ECHO ...........Deployment Compelted................ @ECHO ...........Deployment Compelted................>> %Envlog% %Date% %Time% ECHO ............................................... here are my issues: Lets say I am running code for 3 servers, then for each instance: For all three servers I am performing destination folder delete even so destination folder is always the same, the code should only delete it in the 1st instance (when code is deployed to first server) then I would prefer if script would check if the code from the source and destination is the same and if it is it should delete the folder or not. Then based on 1: a) deleting web.config and renaming should only happen if code in destination is new b) Robocopy should not override files if they are the same I think there is /Xo option to do that any idea how to achieve that? :)

  Read the article

• Migrating to AWS Cloud with auto-scaling - where to put Redis and ElasticSearch?

  - by RobMasters

  I've been trying to research this topic but haven't found anywhere that recommends where to install services such as Redis and ElasticSearch when migrating to a cloud framework. I'm currently running a Symfony2 application on 2 static servers - one is running MySQL and the other is the public facing web server, which also has Redis and ElasticSearch running on it. Both of these servers are virtualised, but they're static in terms of not being able to replicate at present (various aspects are still dependent on the local filesystem). The goal is to migrate to AWS and use auto-scaling to be able to spin up and kill web servers as required, but I'm not clear on what I should put on each EC2 instance. Should they be single-responsibility only? i.e. Set up individual instances for the web server(s), Redis, and ElasticSearch and most likely an RDS instance for MySQL and only set up auto-scaling on the web server(s)? I don't foresee having to scale the ElasticSearch server anytime soon as it's only driving the search functionality, but it's possible that Redis may need to be replicated at some point - but should this be done manually? I'm not sure of how this could be done automatically as each instance needs to be configured to know about it's master/slave(s) as far as I know. I'd appreciate advice on this. One more quick question while I'm here - how would I be able to deploy code changes when there are X web servers currently active? I'm using a Capifony deployment script (Symfony2 version of Capistrano), which I think can handle multiple servers easily enough by specifying an array of :domain addresses...but how can should this be handled when the number of web servers can vary?

  Read the article

• Users and Groups management on 7 Home Premium

  - by AviD

  Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

  Read the article

• Screen occasionally flashes black when under load, sometimes does not recover

  - by Oak

  I've built a brand new machine, but to my horror my monitor occasionally flashes black for around a second, then returning to normal. This happens under load (watching videos / playing games) but only sometimes; e.g. it doesn't occur in "Batman: Arkham City" but does in "XCOM: Enemy Unknown". When watching videos, it also occurs when not watching them full-screen, and it sometimes even occurs when the machine isn't doing anything, just sitting at the desktop and moving the mouse around. Has anyone ran into this problem and knows of any solution? Additionally, sometimes after the black screen, it won't return to normal, instead turning completely corrupt. In these cases even quitting the application doesn't help, but physically disconnecting and reconnecting the monitor fixes the problem. This problem did not occur on my earlier machine which used the same physical monitor. Additional details: Windows Server 2012, configured as Windows 8, with latest updates installed NVIDIA GeForce GTX 660 Ti, with latest driver installed Ample amounts of CPU and RAM for playing the above games and for watching videos. I've read about similar problems elsewhere but could not find a working solution: http://www.youtube.com/watch?v=Zt00C-HXFbA&noredirect=1 http://www.sevenforums.com/hardware-devices/59126-monitor-flashing-black.html https://eu.battle.net/d3/en/forum/topic/4079098908?page=4 http://www.tomshardware.com/forum/347422-33-screen-flickering-black-nvidia-driver-update

  Read the article

• Custom Domain for Google App Engine and Google Apps

  - by Kevin

  I have set up and configured Google App Engine and Google Apps to use my custom domain with a cname 'www'. I have configured my DNS (via fasthosts.co.uk) with the cname and pointed it to ghs.google.com. I can access the website using the google app engine domain at capel-y-crwys.appspot.com but I can't access it via my custom domain www.capelycrwys.org.uk. I have allowed several days for propagation of the DNS etc. The really strange this is I can access the app via my custom domain when I use the web browser on my Android mobile phone. I can't access the app via my custom domain from my home internet connection, my work internet connection or a friends internet connection. I tried a few online web proxies and I can access the app via the custom domain. I posted this question on the google forums code.google.com/appengine/forum/?place=topic%2Fgoogle-appengine%2FfUP-G_0FKE4%2Fdiscussion and a commentor has said he could access the app via the custom domain. So why can't I access it direct via my home internet connection etc? I've tried loads of google searching and even found a similar sounding post here on serverfault serverfault.com/questions/208461/custom-domain-name-server-not-found-google-app-engine-and-google-apps but it doesn't have an answer that helps me.

  Read the article

• How can I setup a Proxy I can sniff traffic from using an ESX vswitch in promiscuous mode?

  - by sandroid

  I have a pretty specific requirement, detailed below. Here's what I'm not looking for help for, to keep things tidy and on topic: How to configure a standard proxy Any ESX setup required to facilitate traffic sniffing How to sniff traffic Any changes in design (my scope limits me) I need to setup a test environment for a network-sniffing based HTTP app monitoring tool, and I need to troubleshoot a client issue but he only has a prod network, so making changes to the config on client's system "just to try" is costly. The goal here is to create a similar system in my lab, and hit the client's webapp and redirect my traffic - using a proxy - into the lab environment. The reason I want to use a proxy is so that only this specific traffic is redirected for all to see, and not all my web traffic (like my visits to serverfault :P). Everything will run inside an ESX 4.1 machine. In there, there is a traffic collection vswitch in promiscuous mode that is not on the local network for security reasons. The VM containing our listening agent is connected to this vswitch. On the same ESX host, I will setup a basic linux server and install a proxy (either apache + mod_proxy or squid, doesn't matter). I'm looking for ideas on how to deploy this for my needs so I can then figure out how to set it up accordingly. Some ideas I've had were to setup two proxies, and have them talk to eachother through this vswitch in promiscuous mode, but it seems like alot of work. Another idea is a dual-homed proxy, but I've never seen/done that before so I'm not sure how doable it is for what I'd like. I am OK with setting up a second vswitch in promiscuous mode to facilitate this if need be, but I cannot put the vswitch on the lan (which is used so my browser would communicate with the proxy) in promiscuous mode. Any ideas are welcome.

  Read the article

• How can you force the start and end date of a task in Microsoft Project to be on the same day?

  - by Hauke P.

  I have a task called "Interview person A about topic X". The task's duration is set to 2 hours. The start date of the task should automatically be calculated taking dependencies and resource availabilities into account. My question boils down to: How can I force this task to start and end on the same date? Background: In my case, Microsoft Project sets the start date to a Friday at 5pm. As my working hours are set to 8am to 12am and 1pm to 6pm (Mon-Fri), Microsoft Project "splits up" the task at 6pm on Friday and plans to continue it at 8am on the following Monday. However, it does not make any sense to stop the interview on a Friday and restart it on Monday. Therefore the automatic suggestion is not helpful in this case. That's why I'm looking for a way way to force the task to start and end on the very same day. (In my example, I'd like Microsoft Project to delay the start date of the task until Monday 8am as this is the first time slot in which the task "fits in completely".) By the way: I have lots of such cases... for that reason it would be really great if there was a solution that doesn't just deal with this single special case.)

  Read the article

• Vista 64-bit, DISK BOOT FAILURE

  - by weka

  So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• Offloading backups to secondary network

  - by user1467163

  I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

  Read the article

• Excel hyperlinks can be attached to a range of cells -- what is the use case for this?

  - by John Machin

  In Excel 2003 and 2007 (and presumably 2010), it is possible to attach a hyperlink to a single cell; this is well known. Excel also allows you select a range for insertion. In that case, clicking on any cell in the range will jump to the target of the hyperlink. I can't find any web reference to this possibility. My question is: What is the use case for being able to do this? My only suggestion: The first worksheet is a menu for the remainder of the workbook. Each worksheet or topic has a hyperlink on the menu sheet. Each hyperlinks occupies a 3x3 range of cells to make it easier for users in a hurry to click on the correct link. A side question: Interestingly, Excel allows you to overlap ranges. Example: Link from A1:C3 to file1. Then link from B2:D4 to file2. The overlapped cells (B2:C3) now point to file2. Only A1, A2, A3, B1, and C1 now point to file1. No warning is given about the overlap. What is the rationale for this behaviour?

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• Gaming blew fuse and causes funny smell: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

  Read the article

• How to force the start and end date of a task in Microsoft Project to be on the same day?

  - by Hauke P.

  I have a task called "Interview person A about topic X". The task's duration is set to 2 hours. The start date of the task should automatically be calculated taking dependencies and resource availabilities into account. My question boils down to: How can I force this task to start and end on the same date? Background: In my case, Microsoft Project sets the start date to a Friday at 5pm. As my working hours are set to 8am to 12am and 1pm to 6pm (Mon-Fri), Microsoft Project "splits up" the task at 6pm on Friday and plans to continue it at 8am on the following Monday. However, it does not make any sense to stop the interview on a Friday and restart it on Monday. Therefore the automatic suggestion is not helpful in this case. That's why I'm looking for a way way to force the task to start and end on the very same day. (In my example, I'd like Microsoft Project to delay the start date of the task until Monday 8am as this is the first time slot in which the task "fits in completely".) By the way: I have lots of such cases... for that reason it would be really great if there was a solution that doesn't just deal with this single special case.

  Read the article

• Redis connection issue

  - by mre

  We are currently experiencing a lot of Redis errors with the message Unable to connect: read error on connection, trying next server We run Redis on FreeBSD using PHP Redis and we have a hard time reproducing the error on Ubuntu so this might be a hint. There's a long-running issue on that topic on github. Basically we get a socket from the operating system with a call to connect(host, port, timeout) in phpredis, but when we do a select(db_index) afterwards, we get an exception. Could there be an issue with persistance? I assume that connect does nothing in the background and select tries to access the connection, which is actually closed. We don't run into a timeout. We tried tuning TIME_WAIT without success. Any other ideas on where the problem might come from? What is the best way to track the issue down? dtrace maybe? Update We are currently looking into our BGSAVE settings. Interestingly it takes half a second and more to create a fork for the process which regularly writes the data to disk (persistence) and maybe redis can't respond to connect() requests during that timespan.

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

• Howto align partitions in Linux + NetApp

  - by santisaez

  NetApp support has suggested us aligning partitions to improve performance, in short: starting sector must be divisible by 8. How can I move the start point in a misaligned partition -in production, with ext3- under Linux? A screenshot with a misaligned (start=63s) and aligned (start=64s) partition is available at: http://filesocial.com/lkwvvn2 (If anyone is interested in this topic, NetApp has a good document explaining performance issues in misaligned partitions, search for "tr-3747": Best Practices for File System Alignment in Virtual Environments.) I have tried using parted "resize + move" commands, but when moving start point a get this error: (parted) resize Partition number? 1 Start? [64s]? End? [419425019s]? 419425018 (parted) move Partition number? 1 Start? 65 End? [419425019s]? 419425019 Error: Can't move a partition onto itself. Try using resize, perhaps? Using fdisk 'b' command in expert mode ('move beginning of data in a partition') works, but it doesn't move the file system.. thanks!!

  Read the article

• IBM WebSphere Host On-Demand (HoD): Cannot run program with "runprogram" command. What can I do?

  - by kokbira

  I access a system that uses an IBM Host on Demand client. I am tryig to create a macro to do a hard task (more than 90,000 keys must be pressed to complete it), but to do it easier I need to call some "external" aplications using "runprogram" tag. But I don't know why it does not function (following IBM help - http://publib.boulder.ibm.com/infocenter/hodhelp/v11r0/index.jsp?topic=/com.ibm.hod.doc/doc/macro/macro.html - did not help...). I am running in Firefox 3.6 and my Java version is jdk1.6.0_20. Below, an example of macro that should function, but didn't. <HAScript name="TEST4" description="" timeout="60000" pausetime="300" promptall="true" blockinput="false" author="wingman" creationdate="05/05/2011 16:14:31" supressclearevents="false" usevars="false" ignorepauseforenhancedtn="true" delayifnotenhancedtn="0" ignorepausetimeforenhancedtn="true"> <vars> <create name="$intReturn$" type="integer" value="0" /> </vars> <screen name="Tela1" entryscreen="true" exitscreen="false" transient="false"> <description > <oia status="NOTINHIBITED" optional="false" invertmatch="false" /> </description> <actions> <runprogram exe= "'c:\\Program Files\\Windows NT\\Accessories\\Wordpad.exe'" param="'c:\\a.txt'" wait="true" assignexitvalue="$intReturn$" /> <message title="" value="'Return value is '+$intReturn$" /> </actions> <nextscreens timeout="0" > </nextscreens> </screen> </HAScript>

  Read the article

• Is it possible to update Lenovo T500 hybrid graphics driver?

  - by Shiki

  Hope someone had the same problem before. My laptop comes with two video "cards". Intel MHD4500 and ATI Radeon HD3650 (mobility). I can switch between them with the "Lenovo Battery Manager" from the taskbar. All good, but Lenovo provides the driver for this. The problem with that driver is they are a bit old. (Both Intel and ATI). For example I doubt I have any gpu accel in flash, and I experience some problem with dual display setup, which the new ATI driver would solve. Basically I want to create a new driver (I read a topic where a guy said its possible... baaack then when I was searching for something else). One needs a special ATI driver creation utility or what... sorry I can't recall the name of it. Thanks in advance. (Ah yes I forgot: The OS is a Windows 7 x64 Ultimate.)

  Read the article

• How to access Virtual machine using powershell script

  - by Sheetal

  I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >