Search Results

Search found 8783 results on 352 pages for 'laptop disaster'.

Page 349/352 | < Previous Page | 345 346 347 348 349 350 351 352  | Next Page >

• How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

  - by Timbo

  I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

  Read the article

• Simple jquery ajax call leaks memory in ie.

  - by Thomas Lane

  I created a web page that makes an ajax call every second. In Internet Explorer 7, it leaks memory badly (20MB in about 15 minutes). The program is very simple. It just runs a javascript function that makes an ajax call. The server returns an empty string, and the javascript does nothing with it. I use setTimout to run the function every second, and I'm using Drip to watch the thing. Here is the source: <html> <head> <script type="text/javascript" src="http://www.google.com/jsapi"></script> <script type="text/javascript"> google.load('jquery', '1.4.2'); google.load('jqueryui', '1.7.2'); </script> <script type="text/javascript"> setTimeout('testJunk()',1000); function testJunk() { $.ajax({ url: 'http://xxxxxxxxxxxxxx/test', // The url returns an empty string dataType: 'html', success: function(data){} }); setTimeout('testJunk()',1000) } </script> </head> <body> Why is memory usage going up? </body> </html> Anyone have an idea how to plug this leak? I have a real application that updates a large table this way, but left unattended will eat up Gigabytes of memory. Okay, so after some good suggestions, I modified the code to: <html> <head> <script type="text/javascript" src="http://www.google.com/jsapi"></script> <script type="text/javascript"> google.load('jquery', '1.4.2'); google.load('jqueryui', '1.7.2'); </script> <script type="text/javascript"> setTimeout(testJunk,1000); function testJunk() { $.ajax({ url: 'http://xxxxxxxxxxxxxx/test', // The url returns an empty string dataType: 'html', success: function(data){setTimeout(testJunk,1000)} }); } </script> </head> <body> Why is memory usage going up? </body> </html> It didn't seem to make any difference though. I'm not doing anything with the DOM, and if I comment out the ajax call, the memory leak stops. So it looks like the leak is entirely in the ajax call. Does jquery ajax inherently create some sort of circular reference, and if so, how can I free it? By the way, it doesn't leak in Firefox. Someone suggested running the test in another VM and see if the results are the same. Rather than setting up another VM, I found a laptop that was running XP Home with IE8. It exhibits the same problem. I tried some older versions of jquery and got better results, but the problem didn't go away entirely until I abandoned ajax in jquery and went with more traditional (and ugly) ajax.

  Read the article

• .NET SerialPort DataReceived event not firing

  - by Klay

  I have a WPF test app for evaluating event-based serial port communication (vs. polling the serial port). The problem is that the DataReceived event doesn't seem to be firing at all. I have a very basic WPF form with a TextBox for user input, a TextBlock for output, and a button to write the input to the serial port. Here's the code: public partial class Window1 : Window { SerialPort port; public Window1() { InitializeComponent(); port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); } void port_DataReceived(object sender, SerialDataReceivedEventArgs e) { Debug.Print("receiving!"); string data = port.ReadExisting(); Debug.Print(data); outputText.Text = data; } private void Button_Click(object sender, RoutedEventArgs e) { Debug.Print("sending: " + inputText.Text); port.WriteLine(inputText.Text); } } Now, here are the complicating factors: The laptop I'm working on has no serial ports, so I'm using a piece of software called Virtual Serial Port Emulator to setup a COM2. VSPE has worked admirably in the past, and it's not clear why it would only malfunction with .NET's SerialPort class, but I mention it just in case. When I hit the button on my form to send the data, my Hyperterminal window (connected on COM2) shows that the data is getting through. Yes, I disconnect Hyperterminal when I want to test my form's ability to read the port. I've tried opening the port before wiring up the event. No change. I've read through another post here where someone else is having a similar problem. None of that info has helped me in this case. EDIT: Here's the console version (modified from http://mark.michaelis.net/Blog/TheBasicsOfSystemIOPortsSerialPort.aspx): class Program { static SerialPort port; static void Main(string[] args) { port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); string text; do { text = Console.ReadLine(); port.Write(text + "\r\n"); } while (text.ToLower() != "q"); } public static void port_DataReceived(object sender, SerialDataReceivedEventArgs args) { string text = port.ReadExisting(); Console.WriteLine("received: " + text); } } This should eliminate any concern that it's a Threading issue (I think). This doesn't work either. Again, Hyperterminal reports the data sent through the port, but the console app doesn't seem to fire the DataReceived event. EDIT #2: I realized that I had two separate apps that should both send and receive from the serial port, so I decided to try running them simultaneously... If I type into the console app, the WPF app DataReceived event fires, with the expected threading error (which I know how to deal with). If I type into the WPF app, the console app DataReceived event fires, and it echoes the data. I'm guessing the issue is somewhere in my use of the VSPE software, which is set up to treat one serial port as both input and output. And through some weirdness of the SerialPort class, one instance of a serial port can't be both the sender and receiver. Anyway, I think it's solved.

  Read the article

• "Content is not allowed in prolog" when parsing perfectly valid XML on GAE

  - by Adrian Petrescu

  Hey guys, I've been beating my head against this absolutely infuriating bug for the last 48 hours, so I thought I'd finally throw in the towel and try asking here before I throw my laptop out the window. I'm trying to parse the response XML from a call I made to AWS SimpleDB. The response is coming back on the wire just fine; for example, it may look like: <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"> <ListDomainsResult> <DomainName>Audio</DomainName> <DomainName>Course</DomainName> <DomainName>DocumentContents</DomainName> <DomainName>LectureSet</DomainName> <DomainName>MetaData</DomainName> <DomainName>Professors</DomainName> <DomainName>Tag</DomainName> </ListDomainsResult> <ResponseMetadata> <RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId> <BoxUsage>0.0000071759</BoxUsage> </ResponseMetadata> </ListDomainsResponse> I pass in this XML to a parser with XMLEventReader eventReader = xmlInputFactory.createXMLEventReader(response.getContent()); and call eventReader.nextEvent(); a bunch of times to get the data I want. Here's the bizarre part -- it works great inside the local server. The response comes in, I parse it, everyone's happy. The problem is that when I deploy the code to Google App Engine, the outgoing request still works, and the response XML seems 100% identical and correct to me, but the response fails to parse with the following exception: com.amazonaws.http.HttpClient handleResponse: Unable to unmarshall response (ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog.): <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"><ListDomainsResult><DomainName>Audio</DomainName><DomainName>Course</DomainName><DomainName>DocumentContents</DomainName><DomainName>LectureSet</DomainName><DomainName>MetaData</DomainName><DomainName>Professors</DomainName><DomainName>Tag</DomainName></ListDomainsResult><ResponseMetadata><RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId><BoxUsage>0.0000071759</BoxUsage></ResponseMetadata></ListDomainsResponse> javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(Unknown Source) at com.sun.xml.internal.stream.XMLEventReaderImpl.nextEvent(Unknown Source) at com.amazonaws.transform.StaxUnmarshallerContext.nextEvent(StaxUnmarshallerContext.java:153) ... (rest of lines omitted) I have double, triple, quadruple checked this XML for 'invisible characters' or non-UTF8 encoded characters, etc. I looked at it byte-by-byte in an array for byte-order-marks or something of that nature. Nothing; it passes every validation test I could throw at it. Even stranger, it happens if I use a Saxon-based parser as well -- but ONLY on GAE, it always works fine in my local environment. It makes it very hard to trace the code for problems when I can only run the debugger on an environment that works perfectly (I haven't found any good way to remotely debug on GAE). Nevertheless, using the primitive means I have, I've tried a million approaches including: XML with and without the prolog With and without newlines With and without the "encoding=" attribute in the prolog Both newline styles With and without the chunking information present in the HTTP stream And I've tried most of these in multiple combinations where it made sense they would interact -- nothing! I'm at my wit's end. Has anyone seen an issue like this before that can hopefully shed some light on it? Thanks!

  Read the article

• Installed Perl DBI Module Can't Be Found

  - by Russell C.

  I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!!

  Read the article

• How can I install Perl's DBI on Mac OS X so Apache can find it?

  - by Russell C.

  I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!! Thanks in advance.

  Read the article

• General website publishing questions involving domain forwarding issue

  - by Gorgeousyousuf

  Even though I have been having a certain level of knowledge and experience about web development I have never interested in obtaining a domain and publishing a website from my own server. Since today I have been struggling with getting my own domain and configuring it utilizing web sources. I started with learning the outline of web publishing process including web server installation, deploying a website for testing purpose,router port forwarding, getting a domain and forwarding domain to my router which will also forward http requests to my web server I am confused about some parts and so far could not get the web site accessed from outside of the network. All I try to do is just for learning purpose so I do not pay much attention to security issues for now. I have Server 2008 and IIS 7.5 installed. I use a laptop and have access to the modem over wireless and my modem is Zoom x6 5590. Well I will continue explaining what I have done so far and what I think will be after each action I did, I have successfully had access to my website on any local computer entering the internal ip address and port pair of the host machine in a browser. Next, I forwarded port 80 of my host machine creating a virtual server like 10.0.0.x(internal ip(static) of the host) - tcp - start port : 80 - end port : 80 in router options. Now I suppose every request that will come to the public Ip on port 80 will be forwarded to my host machine(10.0.0.x) over port 80. So If everyhing went as desired, the website listening on port 80 will accept the request and process the issue and finally respond bla bla bla... I suppose to access my website from outside of the network by entering http://MyPublicIp:80 in a browser but I couldn't accomplish this task by now despite using godady's domain forwarding tool,I see a small view of my website when I click the "preview" button that checks whether the address(http://publicip/Index.aspx) I entered where my domain will be forwarded is available or not. I am sure that configuring domain does not play a role in solving such a problem since using public ip and port matching does not help. So here is the first question, What is the fact that I face this problem? After that, I have couple of question regarding domain forwarding using godaddy tool. Can I forward my domain to a any port for example port 8080 other than default http port 80? Additionally, can I use a sub-domain to forward to a different port of the host? What I want to design is if the client enters www.mydomain.com, website1 will respond over a specified port and after when a client enters info.mydomain.com, another website which listens on different port will respond. I tried to add a sub-domain and forward it to a address like http://www.mydomain.com:8080/Index.aspx with no success. Can I really do that? Finally, what if I have a ftp site listening on the default port 21 and I create a domain like ftp.mydomain.com that will forward to that ftp site address. Is it possible to use sub-domains for ftp site access? I know I am more than confused but no matter whatever and however you reply to me, you will help me have a more clear view on this subject. Thank you very much from now.

  Read the article

• Optimal storage of data structure for fast lookup and persistence

  - by Mikael Svenson

  Scenario I have the following methods: public void AddItemSecurity(int itemId, int[] userIds) public int[] GetValidItemIds(int userId) Initially I'm thinking storage on the form: itemId -> userId, userId, userId and userId -> itemId, itemId, itemId AddItemSecurity is based on how I get data from a third party API, GetValidItemIds is how I want to use it at runtime. There are potentially 2000 users and 10 million items. Item id's are on the form: 2007123456, 2010001234 (10 digits where first four represent the year). AddItemSecurity does not have to perform super fast, but GetValidIds needs to be subsecond. Also, if there is an update on an existing itemId I need to remove that itemId for users no longer in the list. I'm trying to think about how I should store this in an optimal fashion. Preferably on disk (with caching), but I want the code maintainable and clean. If the item id's had started at 0, I thought about creating a byte array the length of MaxItemId / 8 for each user, and set a true/false bit if the item was present or not. That would limit the array length to little over 1mb per user and give fast lookups as well as an easy way to update the list per user. By persisting this as Memory Mapped Files with the .Net 4 framework I think I would get decent caching as well (if the machine has enough RAM) without implementing caching logic myself. Parsing the id, stripping out the year, and store an array per year could be a solution. The ItemId - UserId[] list can be serialized directly to disk and read/write with a normal FileStream in order to persist the list and diff it when there are changes. Each time a new user is added all the lists have to updated as well, but this can be done nightly. Question Should I continue to try out this approach, or are there other paths which should be explored as well? I'm thinking SQL server will not perform fast enough, and it would give an overhead (at least if it's hosted on a different server), but my assumptions might be wrong. Any thought or insights on the matter is appreciated. And I want to try to solve it without adding too much hardware :) [Update 2010-03-31] I have now tested with SQL server 2008 under the following conditions. Table with two columns (userid,itemid) both are Int Clustered index on the two columns Added ~800.000 items for 180 users - Total of 144 million rows Allocated 4gb ram for SQL server Dual Core 2.66ghz laptop SSD disk Use a SqlDataReader to read all itemid's into a List Loop over all users If I run one thread it averages on 0.2 seconds. When I add a second thread it goes up to 0.4 seconds, which is still ok. From there on the results are decreasing. Adding a third thread brings alot of the queries up to 2 seonds. A forth thread, up to 4 seconds, a fifth spikes some of the queries up to 50 seconds. The CPU is roofing while this is going on, even on one thread. My test app takes some due to the speedy loop, and sql the rest. Which leads me to the conclusion that it won't scale very well. At least not on my tested hardware. Are there ways to optimize the database, say storing an array of int's per user instead of one record per item. But this makes it harder to remove items.

  Read the article

• How to resolve CGDirectDisplayID changing issues on newer multi-GPU Apple laptops in Core Foundation

  - by Dave Gallagher

  In Mac OS X, every display gets a unique CGDirectDisplayID number assigned to it. You can use CGGetActiveDisplayList() or [NSScreen screens] to access them, among others. Per Apple's docs: A display ID can persist across processes and system reboot, and typically remains constant as long as certain display parameters do not change. On newer mid-2010 MacBook Pro's, Apple started using auto-switching Intel/nVidia graphics. Laptops have two GPU's, a low-powered Intel, and a high-powered nVidia. Previous dual-GPU laptops (2009 models) didn't have auto-GPU switching, and required the user to make a settings change, logoff, and then logon again to make a GPU switch occur. Even older systems only had one GPU. There's an issue with the mid-2010 models where CGDirectDisplayID's don't remain the same when a display switches from one GPU to the next. For example: Laptop powers on. Built-In LCD Screen is driven by Intel chipset. Display ID: 30002 External Display is plugged in. Built-In LCD Screen switches to nVidia chipset. It's display ID changes: 30004 External Display is driven by nVidia chipset. ...at this point, the Intel chipset is dormant... User unplugs External Display. Built-In LCD Screen switches back to Intel chipset. It's display ID changes back to original: 30002 My question is, how can I match an old display ID to a new display ID when they alter due to a GPU change? Thought about: I've noticed that the display ID only changes by 2, but I don't have enough test Mac's available to determine if this is common to all new MacBook Pro's, or just mine. Kind of a kludge if "just check for display ID's which are +/-2 from one another" works, anyway. Tried: CGDisplayRegisterReconfigurationCallback(), which notifies before-and-after when displays are going to change, has no matching logic. Putting something like this inside a method registered with it doesn't work: // Run before display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef oldInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); // ...display settings change... // Run after display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef newInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); BOOL match = IODisplayMatchDictionaries(oldInfoDict, newInfoDict, 0); if (match) NSLog(@"Displays are a match"); else NSLog(@"Displays are not a match"); What's happening above is I'm caching oldInfoDict before display settings change, letting them change, and then comparing it to newInfoDict by using IODisplayMatchDictionaries(), which will say either "yes, both displays are the same!" or "no, both displays are not the same." Unfortunately, it does not return YES if GPU's have changed for a monitor. Example of the dictionary's it's comparing: // oldInfoDict (Display ID: 30002) oldInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer/display0/AppleBacklightDisplay"; } // newInfoDict (Display ID: 30004) newInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P2@1/IOPCI2PCIBridge/GFX0@0/NVDA,Display-A@0/NVDA/display0/AppleBacklightDisplay"; } As you can see, the IODisplayLocation key changes when GPU's are switched, hence IODisplayMatchDictionaries() doesn't work. I can, theoretically, compared just the DisplayProductID and DisplayVendorID keys, but I'm writing end-user software, and am worried of a situation where users have two or more identical monitors plugged in. Any help is greatly appreciated! :)

  Read the article

• Paging, sorting and filtering in a stored procedure (SQL Server)

  - by Fruitbat

  I was looking at different ways of writing a stored procedure to return a "page" of data. This was for use with the asp ObjectDataSource, but it could be considered a more general problem. The requirement is to return a subset of the data based on the usual paging paremeters, startPageIndex and maximumRows, but also a sortBy parameter to allow the data to be sorted. Also there are some parameters passed in to filter the data on various conditions. One common way to do this seems to be something like this: [Method 1] ;WITH stuff AS ( SELECT CASE WHEN @SortBy = 'Name' THEN ROW_NUMBER() OVER (ORDER BY Name) WHEN @SortBy = 'Name DESC' THEN ROW_NUMBER() OVER (ORDER BY Name DESC) WHEN @SortBy = ... ELSE ROW_NUMBER() OVER (ORDER BY whatever) END AS Row, ., ., ., FROM Table1 INNER JOIN Table2 ... LEFT JOIN Table3 ... WHERE ... (lots of things to check) ) SELECT * FROM stuff WHERE (Row > @startRowIndex) AND (Row <= @startRowIndex + @maximumRows OR @maximumRows <= 0) ORDER BY Row One problem with this is that it doesn't give the total count and generally we need another stored procedure for that. This second stored procedure has to replicate the parameter list and the complex WHERE clause. Not nice. One solution is to append an extra column to the final select list, (SELECT COUNT(*) FROM stuff) AS TotalRows. This gives us the total but repeats it for every row in the result set, which is not ideal. [Method 2] An interesting alternative is given here (http://www.4guysfromrolla.com/articles/032206-1.aspx) using dynamic SQL. He reckons that the performance is better because the CASE statement in the first solution drags things down. Fair enough, and this solution makes it easy to get the totalRows and slap it into an output parameter. But I hate coding dynamic SQL. All that 'bit of SQL ' + STR(@parm1) +' bit more SQL' gubbins. [Method 3] The only way I can find to get what I want, without repeating code which would have to be synchronised, and keeping things reasonably readable is to go back to the "old way" of using a table variable: DECLARE @stuff TABLE (Row INT, ...) INSERT INTO @stuff SELECT CASE WHEN @SortBy = 'Name' THEN ROW_NUMBER() OVER (ORDER BY Name) WHEN @SortBy = 'Name DESC' THEN ROW_NUMBER() OVER (ORDER BY Name DESC) WHEN @SortBy = ... ELSE ROW_NUMBER() OVER (ORDER BY whatever) END AS Row, ., ., ., FROM Table1 INNER JOIN Table2 ... LEFT JOIN Table3 ... WHERE ... (lots of things to check) SELECT * FROM stuff WHERE (Row > @startRowIndex) AND (Row <= @startRowIndex + @maximumRows OR @maximumRows <= 0) ORDER BY Row (Or a similar method using an IDENTITY column on the table variable). Here I can just add a SELECT COUNT on the table variable to get the totalRows and put it into an output parameter. I did some tests and with a fairly simple version of the query (no sortBy and no filter), method 1 seems to come up on top (almost twice as quick as the other 2). Then I decided to test probably I needed the complexity and I needed the SQL to be in stored procedures. With this I get method 1 taking nearly twice as long as the other 2 methods. Which seems strange. Is there any good reason why I shouldn't spurn CTEs and stick with method 3? UPDATE - 15 March 2012 I tried adapting Method 1 to dump the page from the CTE into a temporary table so that I could extract the TotalRows and then select just the relevant columns for the resultset. This seemed to add significantly to the time (more than I expected). I should add that I'm running this on a laptop with SQL Server Express 2008 (all that I have available) but still the comparison should be valid. I looked again at the dynamic SQL method. It turns out I wasn't really doing it properly (just concatenating strings together). I set it up as in the documentation for sp_executesql (with a parameter description string and parameter list) and it's much more readable. Also this method runs fastest in my environment. Why that should be still baffles me, but I guess the answer is hinted at in Hogan's comment.

  Read the article

• Input not cleared.

  - by SoulBeaver

  As the question says, for some reason my program is not flushing the input or using my variables in ways that I cannot identify at the moment. This is for a homework project that I've gone beyond what I had to do for it, now I just want the program to actually work :P Details to make the finding easier: The program executes flawlessly on the first run through. All throws work, only the proper values( n 0 ) are accepted and turned into binary. As soon as I enter my terminate input, the program goes into a loop and only asks for the termiante again like so: When I run this program on Netbeans on my Linux Laptop, the program crashes after I input the terminate value. On Visual C++ on Windows it goes into the loop like just described. In the code I have tried to clear every stream and initialze every variable new as the program restarts, but to no avail. I just can't see my mistake. I believe the error to lie in either the main function: int main( void ) { vector<int> store; int terminate = 1; do { int num = 0; string input = ""; if( cin.fail() ) { cin.clear(); cin.ignore( numeric_limits<streamsize>::max(), '\n' ); } cout << "Please enter a natural number." << endl; readLine( input, num ); cout << "\nThank you. Number is being processed..." << endl; workNum( num, store ); line; cout << "Go again? 0 to terminate." << endl; cin >> terminate // No checking yet, just want it to work! cin.clear(); }while( terminate ); cin.get(); return 0; } or in the function that reads the number: void readLine( string &input, int &num ) { int buf = 1; stringstream ss; vec_sz size; if( ss.fail() ) { ss.clear(); ss.ignore( numeric_limits<streamsize>::max(), '\n' ); } if( getline( cin, input ) ) { size = input.size(); for( int loop = 0; loop < size; ++loop ) if( isalpha( input[loop] ) ) throw domain_error( "Invalid Input." ); ss << input; ss >> buf; if( buf <= 0 ) throw domain_error( "Invalid Input." ); num = buf; ss.clear(); } }

  Read the article

• Problem using easy_install on Windows 7, 64 bit. (cannot find python.exe)

  - by Rune

  Hi, I have just now installed Python 2.6 on my Windows 7 (64 bit) Lenovo t61p laptop. I have downloaded Sphinx and nose and apparently installed them correctly using python setup.py install (at least no errors were reported during the installation). Now I am trying to install pymongo using easy_install but I am not having much success. It seems that easy_install isn't working at all. I execute easy_install as administrator: C:\>easy_install Cannot find Python executable C:\Program Files\Python26\python.exe The path C:\Program Files\Python26\python.exe is correct. I have found this bug report on bugs.python.org which seems to be related, although its status is 'Resolved'. Do you have any ideas as to what may be wrong? Any pointers, hints or tips for diagnosing the problem further would be greatly appreciated. EDIT: This is the stacktrace I receive when trying to install pymongo: C:\Users\Rune Ibsen\Documents\Downloads\pymongo-1.4>python setup.py install running install running bdist_egg running egg_info writing pymongo.egg-info\PKG-INFO writing top-level names to pymongo.egg-info\top_level.txt writing dependency_links to pymongo.egg-info\dependency_links.txt reading manifest file 'pymongo.egg-info\SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'pymongo.egg-info\SOURCES.txt' installing library code to build\bdist.win-amd64\egg running install_lib running build_py running build_ext building 'pymongo._cbson' extension Traceback (most recent call last): File "setup.py", line 166, in <module> "doc": doc}) File "C:\Program Files\Python26\lib\distutils\core.py", line 152, in setup dist.run_commands() File "C:\Program Files\Python26\lib\distutils\dist.py", line 975, in run_commands self.run_command(cmd) File "C:\Program Files\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Program Files\Python26\lib\site-packages\setuptools-0.6c9-py2.6.egg\setuptools\command\install.py", line 76, in run File "C:\Program Files\Python26\lib\site-packages\setuptools-0.6c9-py2.6.egg\setuptools\command\install.py", line 96, in do_egg_install File "C:\Program Files\Python26\lib\distutils\cmd.py", line 333, in run_command self.distribution.run_command(command) File "C:\Program Files\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Program Files\Python26\lib\site-packages\setuptools-0.6c9-py2.6.egg\setuptools\command\bdist_egg.py", line 174, in run File "C:\Program Files\Python26\lib\site-packages\setuptools-0.6c9-py2.6.egg\setuptools\command\bdist_egg.py", line 161, in call_command File "C:\Program Files\Python26\lib\distutils\cmd.py", line 333, in run_command self.distribution.run_command(command) File "C:\Program Files\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Program Files\Python26\lib\site-packages\setuptools-0.6c9-py2.6.egg\setuptools\command\install_lib.py", line 20, in run File "C:\Program Files\Python26\lib\distutils\command\install_lib.py", line 113, in build self.run_command('build_ext') File "C:\Program Files\Python26\lib\distutils\cmd.py", line 333, in run_command self.distribution.run_command(command) File "C:\Program Files\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "setup.py", line 107, in run build_ext.run(self) File "C:\Program Files\Python26\lib\distutils\command\build_ext.py", line 340, in run self.build_extensions() File "C:\Program Files\Python26\lib\distutils\command\build_ext.py", line 449, in build_extensions self.build_extension(ext) File "setup.py", line 117, in build_extension build_ext.build_extension(self, ext) File "C:\Program Files\Python26\lib\distutils\command\build_ext.py", line 499, in build_extension depends=ext.depends) File "C:\Program Files\Python26\lib\distutils\msvc9compiler.py", line 448, in compile self.initialize() File "C:\Program Files\Python26\lib\distutils\msvc9compiler.py", line 358, in initialize vc_env = query_vcvarsall(VERSION, plat_spec) File "C:\Program Files\Python26\lib\distutils\msvc9compiler.py", line 274, in query_vcvarsall raise ValueError(str(list(result.keys()))) ValueError: [u'path'] C:\Users\Rune Ibsen\Documents\Downloads\pymongo-1.4> PS.: I previously installed Python 3.1 but later installed 2.6 because I am not sure whether pymongo supports 3.1. PPS.: I have tried installing pymongo using the python setup.py install approach, but this resulted in a nasty-looking stack trace, so I thought I would try to let easy_install take care of it for me. PPPS.: I am completely new to Python, easy_install, eggs etc.

  Read the article

• How do I return a message if $_GET is null or does not match any database entries?

  - by CT

  I am working on designing an IT Asset database. Here I am working on a page used to view details on a specific asset determined by an asset id. Here I grab $id from $_GET["id"]; When $id is null, the page does not load. When $id does not match any entry within the database, the page loads but no asset table is printed. In both these cases, I would like to display a message like "There is no database entry for that Asset ID" How would this be handled? Thank you. <?php /* * View Asset * */ # include functions script include "functions.php"; $id = $_GET["id"]; ConnectDB(); $type = GetAssetType($id); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td width="15%"></td> <td width="30%%"><li><a href="index.php">Search Assets</a></li></td> <td width="30%"><li><a href="addAsset.php">Add Asset</a></li></td> <td width="25%"></td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <br /> <?php switch ($type){ case "Server": $result = QueryServer($id); $ServerArray = GetServerData($result); PrintServerTable($ServerArray); break; case "Desktop"; break; case "Laptop"; break; } ?> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p>&nbsp;</p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

  Read the article

• Geolocation through Android's GPS Provider on a website?

  - by Corey Ogburn

  I'm trying to get the geolocation of the mobile device in a regular website, not a webview of an application or anything native like that. I'm getting a location, but it's highly inaccurate, the accuracy comes back as 3230 or some other outrageous number. I'm assuming that's in meters, either way it's not nearly accurate enough. By comparison, the same webpage on a laptop gets an accuracy of 30-40. My first thought was that it was using the Network Provider instead of the GPS Provider, telling me where I am based on tower location and reach. A little research later I found enableHighAccuracy and set it true in the options that I pass. After including that, I still notice no difference. Here's the test page's HTML/javascript: <html> <head> <script type="text/javascript" src="http://ecn.dev.virtualearth.net/mapcontrol/mapcontrol.ashx?v=7.0"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.3/jquery.min.js"></script> <script type="text/javascript"> function OnLoad() { $("#Status").text("Init"); if (navigator.geolocation) { $("#Status").text("Supports Geolocation"); navigator.geolocation.getCurrentPosition(HandleLocation, LocationError, { enableHighAccuracy: true }); $("#Status").text("Sent position request..."); } else { $("#Status").text("Doesn't support geolocation"); } } function HandleLocation(position) { $("#Status").text("Received response:"); $("#Position").text("(" + position.coords.latitude + ", " + position.coords.longitude + ") accuracy: " + position.coords.accuracy); var loc = new Microsoft.Maps.Location(position.coords.latitude, position.coords.longitude); GetMap(loc); } function LocationError(error) { switch(error.code) { case error.PERMISSION_DENIED: alert("Location not provided"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unknown error"); break; } } function GetMap(loc) { var map = new Microsoft.Maps.Map(document.getElementById("mapDiv"), {credentials: "Aj59meaCR1e7rNgkfQy7j08Pd3mzfP1r04hGesGmLe2a3ZwZ3iGecwPX2SNPWq5a", center: loc, mapTypeId: Microsoft.Maps.MapTypeId.road, zoom: 15}); } </script> </head> <body onload="javascript:OnLoad()"> <div id="Status"></div> <div id="Position"></div><br/> <div id='mapDiv' style="position:relative; width:600px; height:400px;"></div> </body> </html> I'm testing this on a rooted MyTouch 3G running Cyanogen 6.1 stable, Android 2.2 and GPS is enabled. In case rooting was a problem, I have also had various friends and coworkers try the webpage on their non-rooted 2.0+ Android devices. Each phone had various effects on the accuracy, but none were better than 1000, I attribute this to the different carriers. I have not (but eventually will) tested with iPhone or other location-aware cell phones.

  Read the article

• Code only runs properly if debugging step-by-step

  - by Cornwell

  Hello, I'm making a webserver and I've come up with some very strange problems. My server was running as expected yesterday when I turned off my laptop, but today it only sends the http headers (I didn't change anything) When a user requests a file, if I send them using the following code, it works perfectly: while ((n = fread(data, 1, sizeof(data), file)) > 0) send(ts, data, n, 0); but if I change it to this, it only sends ~2% of the file. And that's not a random number, it actually only sends about 2% of the file. while ((n = fread(data, 1, sizeof(data), file)) > 0) web.Send(data); int WEB::Send(string data) { return send(TempSocket, data.c_str(), data.size(), 0); } changing string to char* doesn't solve the problem. I'm using visual studio2010. If I run my code step-by-step, I am able to solve problem #1, everything gets sent. And that is my main problem. I do not understand why it happens. Hopefully someone can explain it to me. Thanks in advance. EDIT: int APIENTRY WinMain( HINSTANCE hInstance, HINSTANCE hPrev, LPSTR lpCmd,int nShow) { SOCKET MainSocket=0; MSG msg; RedirectIOToConsole(); CreateThread(NULL, NULL, ListenThread, NULL, NULL, NULL); while (GetMessage(&msg, NULL, 0, 0)) { TranslateMessage(&msg); DispatchMessage(&msg); } WSACleanup(); closesocket(MainSocket); MainSocket = INVALID_SOCKET; return msg.wParam; } DWORD WINAPI ListenThread(LPVOID lparam) { SOCKET MainSocket; WSADATA wsaData; SOCKET tmpsock; struct sockaddr_in local, from; int fromlen=sizeof(from); WSAStartup(MAKEWORD(2, 2), &wsaData); local.sin_family=AF_INET; local.sin_addr.s_addr=INADDR_ANY; local.sin_port=htons(PORT); MainSocket=socket(AF_INET,SOCK_STREAM,0); if(MainSocket==INVALID_SOCKET) { return 0; } if(bind(MainSocket,(struct sockaddr*)&local,sizeof(local))!=0) { return 0; } if(listen(MainSocket,10)!=0) { return 0; } while(1) { tmpsock = accept(MainSocket,(struct sockaddr*)&from,&fromlen); CreateThread(NULL, NULL, SlaveThread, (LPVOID)tmpsock, NULL, NULL); } } DWORD WINAPI SlaveThread(LPVOID lparam) { SOCKET ts = (SOCKET)lparam;//temporary socket ...... char data[4096]; int n; unsigned long int length = statbuf.st_size; web.SendHeaders(200, "OK", format("Content-Disposition: attachment; filename=\"%s\"", FileName.c_str()).c_str(), web.GetMimeType(ReqPath.c_str()), length, statbuf.st_mtime); unsigned long int i=0,d=0; while ((n = fread(data, 1, sizeof(data), file)) > 0) { d+=send(ts, data, n, 0); i+=n; } printf("%i=%i=%i\n", length,i,d); fclose(file);

  Read the article

• Solution: Testing Web Services with MSTest on Team Build

  - by Martin Hinshelwood

  Guess what. About 20 minutes after I fixed the build, Allan broke it again! Update: 4th March 2010 – After having huge problems getting this working I read Billy Wang’s post which showed me the light. The problem here is that even though the test passes locally it will not during an Automated Build. When you send your tests to the build server it does not understand that you want to spin up the web site and run tests against that! When you run the test in Visual Studio it spins up the web site anyway, but would you expect your test to pass if you told the website not to spin up? Of course not. So, when you send the code to the build server you need to tell it what to spin up. First, the best way to get the parameters you need is to right click on the method you want to test and select “Create Unit Test”. This will detect wither you are running in IIS or ASP.NET Development Server or None, and create the relevant tags. Figure: Right clicking on “SaveDefaultProjectFile” will produce a context menu with “Create Unit tests…” on it. If you use this option it will AutoDetect most of the Attributes that are required. /// <summary> ///A test for SSW.SQLDeploy.SilverlightUI.Web.Services.IProfileService.SaveDefaultProjectFile ///</summary> // TODO: Ensure that the UrlToTest attribute specifies a URL to an ASP.NET page (for example, // http://.../Default.aspx). This is necessary for the unit test to be executed on the web server, // whether you are testing a page, web service, or a WCF service. [TestMethod()] [HostType("ASP.NET")] [AspNetDevelopmentServerHost("D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web", "/")] [UrlToTest("http://localhost:3100/")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] public void SaveDefaultProjectFileTest() { IProfileService target = new ProfileService(); // TODO: Initialize to an appropriate value string strComputerName = string.Empty; // TODO: Initialize to an appropriate value bool expected = false; // TODO: Initialize to an appropriate value bool actual; actual = target.SaveDefaultProjectFile(strComputerName); Assert.AreEqual(expected, actual); Assert.Inconclusive("Verify the correctness of this test method."); } Figure: Auto created code that shows the attributes required to run correctly in IIS or in this case ASP.NET Development Server If you are a purist and don’t like creating unit tests like this then you just need to add the three attributes manually. HostType – This attribute specified what host to use. Its an extensibility point, so you could write your own. Or you could just use “ASP.NET”. UrlToTest – This specifies the start URL. For most tests it does not matter which page you call, as long as it is a valid page otherwise your test may not run on the server, but may pass anyway. AspNetDevelopmentServerHost – This is a nasty one, it is only used if you are using ASP.NET Development Host and is unnecessary if you are using IIS. This sets the host settings and the first value MUST be the physical path to the root of your web application. OK, so all that was rubbish and I could not get anything working using the MSDN documentation. Google provided very little help until I ran into Billy Wang’s post  and I heard that heavenly music that all developers hear when understanding dawns that what they have been doing up until now is just plain stupid. I am sure that the above will work when I am doing Web Unit Tests, but there is a much easier way when doing web services. You need to add the AspNetDevelopmentServer attribute to your code. This will tell MSTest to spin up an ASP.NET Development server to host the service. Specify the path to the web application you want to use. [AspNetDevelopmentServer("WebApp1", "D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: This AspNetDevelopmentServer will make sure that the specified web application is launched. Now we can run the test and have it pass, but if the dynamically assigned ASP.NET Development server port changes what happens to the details in your app.config that was generated when creating a reference to the web service? Well, it would be wrong and the test would fail. This is where Billy’s helper method comes in. Once you have created an instance of your service call, and it has loaded the config, but before you make any calls to it you need to go in and dynamically set the Endpoint address to the same address as your dynamically hosted Web Application. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.VisualStudio.TestTools.UnitTesting; using System.Reflection; using System.ServiceModel.Description; using System.ServiceModel; namespace SSW.SQLDeploy.Test { class WcfWebServiceHelper { public static bool TryUrlRedirection(object client, TestContext context, string identifier) { bool result = true; try { PropertyInfo property = client.GetType().GetProperty("Endpoint"); string webServer = context.Properties[string.Format("AspNetDevelopmentServer.{0}", identifier)].ToString(); Uri webServerUri = new Uri(webServer); ServiceEndpoint endpoint = (ServiceEndpoint)property.GetValue(client, null); EndpointAddressBuilder builder = new EndpointAddressBuilder(endpoint.Address); builder.Uri = new Uri(endpoint.Address.Uri.OriginalString.Replace(endpoint.Address.Uri.Authority, webServerUri.Authority)); endpoint.Address = builder.ToEndpointAddress(); } catch (Exception e) { context.WriteLine(e.Message); result = false; } return result; } } } Figure: This fixes a problem with the URL in your web.config not being the same as the dynamically hosted ASP.NET Development server port. We can now add a call to this method after we created the Proxy object and change the Endpoint for the Service to the correct one. This process is wrapped in an assert as if it fails there is no point in continuing. [AspNetDevelopmentServer("WebApp1", D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Editing the Endpoint from the app.config on the fly to match the dynamically hosted ASP.NET Development Server URL and port is now easy. As you can imagine AspNetDevelopmentServer poses some problems of you have multiple developers. What are the chances of everyone using the same location to store the source? What about if you are using a build server, how do you tell MSTest where to look for the files? To the rescue is a property called" “%PathToWebRoot%” which is always right on the build server. It will always point to your build drop folder for your solutions web sites. Which will be “\\tfs.ssw.com.au\BuildDrop\[BuildName]\Debug\_PrecompiledWeb\” or whatever your build drop location is. So lets change the code above to add this. [AspNetDevelopmentServer("WebApp1", "%PathToWebRoot%\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Adding %PathToWebRoot% to the AspNetDevelopmentServer path makes it work everywhere. Now we have another problem… this will ONLY run on the build server and will fail locally as %PathToWebRoot%’s default value is “C:\Users\[profile]\Documents\Visual Studio 2010\Projects”. Well this sucks… How do we get the test to run on any build server and any developer laptop. Open “Tools | Options | Test Tools | Test Execution” in Visual Studio and you will see a field called “Web application root directory”. This is where you override that default above. Figure: You can override the default website location for tests. In my case I would put in “D:\Workspaces\SSW\SSW\SqlDeploy\DEV\Main” and all the developers working with this branch would put in the folder that they have mapped. Can you see a problem? What is I create a “$/SSW/SqlDeploy/DEV/34567” branch from Main and I want to run tests in there. Well… I would have to change the value above. This is not ideal, but as you can put your projects anywhere on a computer, it has to be done. Conclusion Although this looks convoluted and complicated there are real problems being solved here that mean that you have a test ANYWHERE solution. Any build server, any Developer workstation. Resources: http://billwg.blogspot.com/2009/06/testing-wcf-web-services.html http://tough-to-find.blogspot.com/2008/04/testing-asmx-web-services-in-visual.html http://msdn.microsoft.com/en-us/library/ms243399(VS.100).aspx http://blogs.msdn.com/dscruggs/archive/2008/09/29/web-tests-unit-tests-the-asp-net-development-server-and-code-coverage.aspx http://www.5z5.com/News/?543f8bc8b36b174f Technorati Tags: VS2010,MSTest,Team Build 2010,Team Build,Visual Studio,Visual Studio 2010,Visual Studio ALM,Team Test,Team Test 2010

  Read the article

• SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

  - by pinaldave

  Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency.  SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB  [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache.  If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause.  I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful.  Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Simple Branching and Merging with SVN

  Its a good idea not to do too much work without checking something into source control.  By too much work I mean typically on the order of a couple of hours at most, and certainly its a good practice to check in anything you have before you leave the office for the day.  But what if your changes break the build (on the build server you do have a build server dont you?) or would cause problems for others on your team if they get the latest code?  The solution with Subversion is branching and merging (incidentally, if youre using Microsoft Visual Studio Team System, you can shelve your changes and share shelvesets with others, which accomplishes many of the same things as branching and merging, but is a bit simpler to do). Getting Started Im going to assume you have Subversion installed along with the nearly ubiquitous client, TortoiseSVN.  See my previous post on installing SVN server if you want to get it set up real quick (you can put it on your workstation/laptop just to learn how it works easily enough). Overview When you know you are going to be working on something that you wont be able to check in quickly, its a good idea to start a branch.  Its also perfectly fine to create the branch after-the-fact (have you ever started something thinking it would be an hour and 4 hours later realized you were nowhere near done?).  In any event, the first thing you need to do is create a branch.  A branch is simply a copy of the current trunk (a typical subversion setup has root directories called trunk, tags, and branches its a good idea to keep this and to put your branches in the branches folder).  Once you have a new branch, you need to switch your working copy so that it is bound to your branch.  As you work,  you may want to merge in changes that are happening in the trunk to your branch, and ultimately when you are done youll want to merge your branch back into the trunk.  When done, you can delete your branch (or not, but it may add clutter).  To sum up: Create a new branch Switch your local working copy to the new branch Develop in the branch (commit changes, etc.) Merge changes from trunk into your branch Merge changes from branch into trunk Delete the branch Create a new branch From the root of your repository, right-click and select TortoiseSVN > Branch/tag as shown at right (click to enlarge).  This will bring up the Copy (Branch / Tag) interface.  By default the From WC at URL: should be pointing at the trunk of your repository.  I recommend (after ensuring that you have the latest version) that you choose to make the copy from the HEAD revision in the repository (the first radio button).  In the To URL: textbox, you should change the URL from /trunk to /branches/NAME_OF_BRANCH.  You can name the branch anything you like, but its often useful to give it your name (if its just for your use) or some useful information (such as a datestamp or a bug/issue ID from that it relates to, or perhaps just the name of the feature you are adding. When youre done with that, enter in a log message for your new branch.  If you want to immediately switch your local working copy to the new branch/tag, check the box at the bottom of the dialog (Switch working copy to new branch/tag).  You can see an example at right. Assuming everything works, you should very quickly see a window telling you the Copy finished, like the one shown below: Switch Local Working Copy to New Branch If you followed the instructions above and checked the box when you created your branch, you dont need to do this step.  However, if you have a branch that already exists and you would like to switch over to working on it, you can do so by using the Switch command.  Youll find it in the explorer context menu under TortoiseSVN > Switch: This brings up a dialog that shows you your current binding, and lets you enter in a new URL to switch to: In the screenshot above, you can see that Im currently bound to a branch, and so I could switch back to the trunk or to another branch.  If youre not sure what to enter here, you can click the [] next to the URL textbox to explore your repository and find the appropriate root URL to use.  Also, the dropdown will show you URLs that might be a good fit (such as the trunk of the current repository). Develop in the Branch Once you have created a branch and switched your working copy to use it,  you can make changes and Commit them as usual.  Your commits are now going into the branch, so they wont impact other users or the build server that are working off of the trunk (or their own branches).  In theory you can keep on doing this forever, but practically its a good idea to periodically merge the trunk into your branch, and/or keep your branches short-lived and merge them back into the trunk before they get too far out of sync. Merge Changes from Trunk into your Branch Once you have been working in a branch for a little while, change to the trunk will have occurred that youll want to merge into your branch.  Its much safer and easier to integrate changes in small increments than to wait for weeks or months and then try to merge in two very different codebases.  To perform the merge, simply go to the root of your branch working copy and right click, select TortoiseSVN->Merge.  Youll be presented with this dialog: In this case you want to leave the default setting, Merge a range of revisions.  Click Next.  Now choose the URL to merge from.  You should select the trunk of your current repository (which should be in the dropdownlist, or you can click the [] to browse your repository for the correct URL).  You can leave everything else blank since you want to merge everything: Click Next.  Again you can leave the default settings.  If you want to do something more granular than everything in the trunk, you can select a different Merge depth, to include merging just one item in the tree.  You can also perform a Test merge to see what changes will take place before you click Merge (which is often a good idea).  Heres what the dialog should look like before you click Merge: After clicking Merge (or Test merge) you should see a confirmation like this (it will say Test Only in the title if you click Test merge): Now you should build your solution, run all of your tests, and verify that your branch still works the way it should, given the updates that youve just integrated from the trunk.  Once everything works, Commit your changes, and then continue with your work on the branch.  Note that until you commit, nothing has actually changed in your branch on the server.  Other team members who may also be working in this branch wont be impacted, etc.  The Merge is purely a client-side operation until you perform a Commit. In a more real-world scenario, you may have conflicts.  When you do, youll be presented with a dialog like this one: Its up to you which option you want to go with.  The more frequently you Merge, the fewer of these youll have to deal with.  Also, be very sure that youre merging the right folders together.  If you try and merge your trunk with some subfolder in your branchs structure, youll end up with all kinds of conflicts and problems.  Fortunately, theyre only on your working copy (unless you commit them!) but if you see something like that, be sure to doublecheck your URL and your local file location. Merge Your Branch Back Into Trunk When youre done working in your branch, its time to pull it back into the trunk.  The first thing you should do is follow the previous steps instructions for merging the latest from the trunk into your branch.  This lets you ensure that what you have in your branch works correctly with the current trunk.  Once youve done that and committed your changes to your branch, youre ready to proceed with this step. Once youre confident your branch is good to go, you should go to its root folder and select TortoiseSVN->Merge (as above) from the explorer right-click menu.  This time, select Reintegrate a branch as shown below: Click Next.  Youll want it to merge with the trunk, which should be the default: Click Next. Leave the default settings: Click Test merge to see a test, and then if all looks good, click Merge.  Note that if you havent checked in your working copy changes, youll see something like this: If on the other hand things are successful: After this step, its likely you are finished working in your branch.  Dont forget to use the ToroiseSVN->Switch command to change your working copy back to the trunk. Delete the Branch You dont have to delete the branch, but over time your branches area of your repository will get cluttered, and in any event if theyre not actively being worked on the branches are just taking up space and adding to later confusion.  Keeping your branches limited to things youre actively working on is simply a good habit to get into, just like making sure your codebase itself remains tidy and not filled with old commented out bits of code. To delete the branch after youre finished with it, the simplest thing to do is choose TortoiseSVN->Repo Browser.  From there, assuming you did this from your branch, it should already be highlighted.  In any event, navigate to your branch in the treeview on the left, and then right-click and select Delete.  Enter a log message if youd like: Click OK, and its gone.  Dont be too afraid of this, though.  You can still get to the files by viewing the log for branches, and selecting a previous revision (anything before the delete action): If for some reason you needed something that was previously in this branch, you could easily get back to any changeset you checked in, so you should have absolutely no fear when it comes to deleting branches youre done with.   Resources If youre using Eclipse, theres a nice write-up of the steps required by Zach Cox that I found helpful here. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Building the Ultimate SharePoint 2010 Development Environment

  - by Manesh Karunakaran

  It’s been more than a month since SharePoint 2010 RTMed. And a lot of people have downloaded and set up their very own SharePoint 2010 development rigs. And quite a few people have written blogs about setting up good development environments, there is even an MSDN article on it. Two of the blogs worth noting are from MVPs Sahil Malik and Wictor Wilén. Make sure that you check these out as well. Part of the bad side-effects of being a geek is the need to do the technical stuff the best way possible (pragmatic or otherwise), but the problem with this is that what is considered “best” is relative. Precisely the reason why you are reading this post now. Most of the posts that I read are out dated/need updations or are using the wrong OS’es or virtualization solutions (again, opinions vary) or using them the wrong way. Here’s a developer’s view of Building the Ultimate SharePoint 2010 Development Rig. If you are a sales guy, it’s time to close this window. Confusion 1: Which Host Operating System and Virtualization Solution to use? This point has been beaten to death in numerous blog posts in the past, if you have time to invest, read this excellent post by our very own SharePoint Joel on this subject. But if you are planning to build the Ultimate Development Rig, then Windows Server 2008 R2 with Hyper-V is the option that you should be looking at. I have been using this as my primary OS for about 6-7 months now, and I haven’t had any Driver issue or Application compatibility issue. In my experience all the Windows 7 drivers work fine with WIN2008 R2 also. You can enable Aero for eye candy (and the Windows 7 look and feel) and except for a few things like the Hibernation support (which a can be enabled if you really want it), Windows Server 2008 R2, is the best Workstation OS that I have used till date. But frankly the answer to this question of which OS to use depends primarily on one question - Are you willing to change your primary OS? If the answer to that is ‘Yes’, then Windows 2008 R2 with Hyper-V is the best option, if not look at vmWare or VirtualBox, both are equally good. Those who are familiar with a Virtual PC background might prefer Sun VirtualBox. Besides, these provide support for running 64 bit guest machines on 32 bit hosts if the underlying hardware is truly 64 bit. See my earlier post on this. Since we are going to make the ultimate rig, we will use Windows Server 2008 R2 with Hyper-V, for reasons mentioned above. Confusion 2: Should I use a multi-(virtual) server set up? A lot of people use multiple servers for their development environments - like Wictor Wilén is suggesting - one server hosting the Active directory, one hosting SharePoint Server and another one for SQL Server. True, this mimics the production environment the best possible way, but as somebody who has fallen for this set up earlier, I can tell you that you don’t really get anything by doing this. Microsoft has done well to ensure that if you can do it on one machine, you can do it in a farm environment as well. Besides, when you run multiple Server class machine instances in parallel, there are a lot of unwanted processor cycles wasted for no good use. In my personal experience, as somebody who needs to switch between MOSS 2007/SharePoint 2010 environments from time to time, the best possible solution is to Make the host Windows Server 2008 R2 machine your Domain Controller (AD Server) Make all your Virtual Guest OS’es join this domain. Have each Individual Guest OS Image have it’s own local SQL Server instance. The advantages are that you can reuse the users and groups in each of the Guest operating systems, you can manage the users in one place, AD is light weight and doesn't take too much resources on your host machine and also having separate SQL instances for each of the Development images gives you maximum flexibility in terms of configuration, for example your SharePoint rigs can have simpler DB configurations, compared to your MS BI blast pits. Confusion 3: Which Operating System should I use to run SharePoint 2010 Now that’s a no brainer. Use Windows 2008 R2 as your Guest OS. When you are building the ultimate rig, why compromise? If you are planning to run Windows Server 2008 as your Guest OS, there are a few patches that you need to install at different times during the installation, for that follow the steps mentioned here Okay now that we have made our choices, let’s get to the interesting part of building the rig, Step 1: Prepare the host machine – Install Windows Server 2008 R2 Install Windows Server 2008 R2 on your best Desktop/Laptop. If you have read this far, I am quite sure that you are somebody who can install an OS on your own, so go ahead and do that. Make sure that you run the compatibility wizard before you go ahead and nuke your current OS. There are plenty of blogs telling you how to make a good Windows 2008 R2 Workstation that feels and behaves like a Windows 7 machine, follow one and once you are done, head to Step 2. Step 2: Configure the host machine as a Domain Controller Before we begin this, let me tell you, this step is completely optional, you don’t really need to do this, you can simply use the local users on the Guest machines instead, but if this is a much cleaner approach to manage users and groups if you run multiple guest operating systems.  This post neatly explains how to configure your Windows Server 2008 R2 host machine as a Domain Controller. Follow those simple steps and you are good to go. If you are not able to get it to work, try this. Step 3: Prepare the guest machine – Install Windows Server 2008 R2 Open Hyper-V Manager Choose to Create a new Guest Operating system Allocate at least 2 GB of Memory to the Guest OS Choose the Windows 2008 R2 Installation Media Start the Virtual Machine to commence installation. Once the Installation is done, Activate the OS. Step 4: Make the Guest operating systems Join the Domain This step is quite simple, just follow these steps below, Fire up Hyper-V Manager, open your Guest OS Click on Start, and Right click on ‘Computer’ and choose ‘Properties’ On the window that pops-up, click on ‘Change Settings’ On the ‘System Properties’ Window that comes up, Click on the ‘Change’ button Now a window named ‘Computer Name/Domain Changes’ opens up, In the text box titled Domain, type in the Domain name from Step 2. Click Ok and windows will show you the welcome to domain message and ask you to restart the machine, click OK to restart. If the addition to domain fails, that means that you have not set up networking in Hyper-V for the Guest OS to communicate with the Host. To enable it, follow the steps I had mentioned in this post earlier. Step 5: Install SQL Server 2008 R2 on the Guest Machine SQL Server 2008 R2 gets installed with out hassle on Windows Server 2008 R2. SQL Server 2008 needs SP2 to work properly on WIN2008 R2. Also SQL Server 2008 R2 allows you to directly add PowerPivot support to SharePoint. Choose to install in SharePoint Integrated Mode in Reporting Server Configuration. Step 6: Install KB971831 and SharePoint 2010 Pre-requisites Now install the WCF Hotfix for Microsoft Windows (KB971831) from this location, and SharePoint 2010 Pre-requisites from the SP2010 Installation media. Step 7: Install and Configure SharePoint 2010 Install SharePoint 2010 from the installation media, after the installation is complete, you are prompted to start the SharePoint Products and Technologies Configuration Wizard. If you are using a local instance of Microsoft SQL Server 2008, install the Microsoft SQL Server 2008 KB 970315 x64 before starting the wizard. If your development environment uses a remote instance of Microsoft SQL Server 2008 or if it has a pre-existing installation of Microsoft SQL Server 2008 on which KB 970315 x64 has already been applied, this step is not necessary. With the wizard open, do the following: Install SQL Server 2008 KB 970315 x64. After the Microsoft SQL Server 2008 KB 970315 x64 installation is finished, complete the wizard. Alternatively, you can choose not to run the wizard by clearing the SharePoint Products and Technologies Configuration Wizard check box and closing the completed installation dialog box. Install SQL Server 2008 KB 970315 x64, and then manually start the SharePoint Products and Technologies Configuration Wizard by opening a Command Prompt window and executing the following command: C:\Program Files\Common Files\Microsoft Shared Debug\Web Server Extensions\14\BIN\psconfigui.exe The SharePoint Products and Technologies Configuration Wizard may fail if you are using a computer that is joined to a domain but that is not connected to a domain controller. Step 8: Install Visual Studio 2010 and SharePoint 2010 SDK Install Visual Studio 2010 Download and Install the Microsoft SharePoint 2010 SDK Step 9: Install PowerPivot for SharePoint and Configure Reporting Services Pop-In the SQLServer 2008 R2 installation media once again and install PowerPivot for SharePoint. This will get added as another instance named POWERPIVOT. Configure Reporting Services by following the steps mentioned here, if you need to get down to the details on how the integration between SharePoint 2010 and SQL Server 2008 R2 works, see Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010 an excellent article by Alan Le Marquand Step 10: Download and Install Sample Databases for Microsoft SQL Server 2008R2 SharePoint 2010 comes with a lot of cool stuff like PerformancePoint Services and BCS, if you need to try these out, you need to have data in your databases. So if you want to save yourself the trouble of creating sample data for your PerformancePoint and BCS experiments, download and install Sample Databases for Microsoft SQL Server 2008R2 from CodePlex. And you are done! Fire up your Visual Studio 2010 and Start Coding away!!

  Read the article

• Move Files from a Failing PC with an Ubuntu Live CD

  - by Trevor Bekolay

  You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

  Read the article

• Part 2: Career development as a Software Developer without becoming a manager.

  - by albertpascual

  Seems like my previous post inspired by the work of Michael “Doc” Norton was a great success for the amount of emails I have received. Yet amazed how many people didn’t want to discuss their questions in the comments  sections. I would encourage people to be more public, still I would like to reply to all of you on this public media. I still welcome those emails. What I found out is that many people feels like me, they want to be developers and still be compensated for their experience without wanting to take a job as a manager. Their perfect day is a full day of coding and learning. Many believe their companies will never pay a manager’s salary to a developer no matter what. Most of you ask how to get the ball rolling. And is the later that I’m addressing here, the previous group, will never try. What companies understand developers value and where can I find them? This is a very difficult question to ask, I don’t have a list of those companies or departments, I have seen in my past signs in companies bending backwards to compensate, in more ways the monetary, a developer that is a good resource to them. Allowing the person to move out of the state and still let them work for the company from home is a sign that company goes by individual cases. Allowing them to go to conference that will not benefit the company is another big sign. Simple signs like flexible hours and letting some people work from home. To see those signs you need to be working in that company for awhile and look at the departments where the manager is taking care of their employees in individual cases. Look for the department where people get quiet extra perks, where some people in the department work from home or remotely. In my experience, but not always true, medium to big companies, are prompt to recognize good developers. Then again, some companies just don’t get it and is when you see many technical people managing developers. For all the people that email me stating that developers can also be very good managers, I do not disagree, I just think that a good developers loves writing code, when you remove that part the better salary isn’t enough to keep a developer happy. Burned out developers appreciate being promoted to managers. How do I know I work in a bad company? In my experience I have been a consultant and seen many companies, a few signs I have learned about companies that will not recognize good developers are: When the turn over is pretty high, when developers are moving out in a big rate, no rocket scientist needs to tap you in the shoulder. When the company is looking always to outsource their development resources. The product is not that interesting nor the company cares too much for their final result and support. Code sweat shops. You’ll know when you start working in one of those. Run for the hills! Where do I start? Disclaimer: I have only based this post on Michael “Doc” Norton, this is just my interpretation and ideas. First thing is to look at Michael “Doc” Norton presentation Take Control of Your Development Career http://docondev.blogspot.com/ That should be the first thing any developer should look and follow like it was a pattern. I would personally recommend to find some language or pattern you are interested with and learn it, learn something that will make you happy. Second, join a User Group and get involve in the community. There are hundreds of user groups, and I’m sure you’ll find one in your city or near you town. Code Camps are Developers Meet Ups are also good resources. Third, I would join a open source project you are interested or better yet, create a new open source project with the new technology that you have learn and get coding. Fourth, create a Twitter account and follow the people that talks about the technology you are interested on. If you follow this 4 steps above I think you’ll be on your way, after they are complete, when you release your Open Source project you can say that you accomplished the first steps. Now, do not expect anything to change in your career life, you are changing and should not expect anything in return, besides borrowing some time from sleeping and your family. Creating a good schedule may help you, I find wasted time in many places that I use. Flying for work is actually one of those that allows me to do my best work on a airplane, don’t need to borrow time from anywhere else. Making sure you always have a light, charged laptop is so important. Next steps following the Michael “Doc” Norton Pattern or my interpretation of. First, help run a user group or better yet, start a new user group. I’ll add, as well, go to one conference a year and free development events around your city; Code Camps, Geek Dinners, etc. There are many free events sponsored by different companies for developers to get to know their products, I highly recommend those as the way to get connected. Second, chose a mentor, this is a very hard thing to do I experienced, find an expert in the technology you are learning that has the time for you, it is difficult, I wish you best of luck. Third, learn another technology or pattern, open your horizons a little bit more. Why not, if you had fun previously, keep doing it. Fourth, get involved in forums to answer and ask questions, getting notice in public forums is rewarding for your ego after such a long journey. Final steps following the Michael “Doc” Norton Pattern Teach what you know, become humble on your knowledge, find as many opportunities to teach and to get involved with the community, bring all that to your day job. Mr. Norton talks about getting naked, expose yourself to others in your knowledge and what you do not know. You are never too important for small opportunities, yet don’t  be afraid to take anything big and learn from the experience. Anytime you have the opportunity to talk to somebody that has reach the point the community knows his or her name, means that you should learn from it. Take opportunities that won’t make you money, yet will make you happy. Sometimes you need to spend money and time. Register talks in Code Camps and Dev Meet Ups, those are free, also go to Conference, Development Summits and Geek Diners for example. One day, people will pay you to attend. When will all these pay off? I don’t know. I’m still in the path, there are a few things that during your journey you may get little acknowledgements that you are in the correct path. In my case I think those are the little signs that tells you about your journey. I got awarded the Microsoft Most Valuable Professional for ASP.NET in 2007, 2008, 2009 and 2010. I got selected to speak at the DevConnections in Las Vegas in 2010 and Orlando 2011. I do believe that I do have a long way to go, yet what I do makes me happy and I hope I can keep doing for years to come. Every year I can see an improvement on my code, and more frameworks and languages are under my belt, I learn to embrace them all as well as in my daily job, I have been able to work in a few projects beyond my department. I’m a learner and believer of the Michael “Doc” Norton pattern. Looking forward to learn more about it to be able to apply it better. In my short journey I now see my mistakes, I did a few things right, I have been listening the intelligent people and not being afraid to move along the technology changes. In my professional life, I have tried to avoid being placed in only one technology and product. I have always share my code and never confused anybody that wanted to take over any of my projects, I didn’t think anything I created as my own nor care too much when politics didn’t see my vision. I stayed flexible, ready and visible, yet humble. I keep my head just below the clouds, and avoided managers meetings. I credit my manager for my success, and I faulted publicly only myself for the failures. Hope this helps. Cheers, Al Follow me in Twitter  Read my previous post tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/09/part-2-career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

  Read the article

• CodePlex Daily Summary for Friday, June 11, 2010

  CodePlex Daily Summary for Friday, June 11, 2010New ProjectsBIxPress Community Edition: SSIS Toolset BIDS Addin,Audit,Notify,Deploy,Template: BI xPress is a BIDS Addin/standalone application for SQL Developer/DBA. This tool has many features including Auditing, Notification, Deployment, P...C# Shell (cash): Cash is a command-line interpreter (shell), written in C#. It is part of an project to produce tools which replace the traditional GNU/Linux user-l...Chernarus Life Revivved: Chernarus life revivved for arma 2 multiplayerDKAL: DKAL is a distributed authorization policy language. This project contains an engine for running DKAL policies. It is implemented primarly in F#.ImageResizer for Albulle: Application permettant de déployer le contenu pour une la galerie photos php Albulle. L'objectif est de faciliter et automatiser le redimensionnem...Intraweb Active Directory Authentication Demo: A simple demo created using Delphi 7 and Intraweb 9.0.42 with the Active Directory Helper interface to authenticate a user to Active Directory. ...Lokad CQRS - build scalable web sites and enterprise solutions on Windows Azure: Lokad CQRS helps to build scalable cloud applications for Windows Azure. It provides time-proven guidance and .NET Application Blocks to help arc...LRS: Write a concise, reader-focused summary. Write a concise, reader-focused summary. Write a concise, reader-focused summary. ManagementPeople99: ...MEDILIG - MEDICAL LIFE GUARD: Cross-platform EHR/EMR software for the design, implementation and use of autonomous, open database models for multilingual clinical data managemen...NETris - ASP .NET, AJAX, Web Service based Tetris Game: Tetris game with business logic provided via Web Services.Peace Through Force: Peace Through Force is a 2D side scrolling tactical shooter developed in XNA Game Studio 3.1 using C#. The game is targeted to be made available o...Powwa: Util to show battery status and cpu speed on laptop. Uses jWMI's for interfacing with Windows' WMI.Resource Management System: Resource Management system for Internal purpose using WPF,WCF and SilverlighttChat - ASP.NET, Ajax & Web Service based Chat Room: Simple chat room application. Technology: ASP .NET, Ajax, Web Services and MS SQL Server Database. Uses ASP .NET authentication mechanism.Test Project (ignore): This is used to demonstrate CodePlex at meetings. Please ignore this project.Transform Config: Transfom Config lets you use the new configuration transformation feature in Visual Studio 2010 without performing a publish on a web application p...unsocialcity: trying to make a game for facebook called <projectname> - just seemed like a fun idea http://apps.facebook.com/unsocialcityVorbisPlayer: VorbisPlayer is the audio user control for Silverlight games. It plays loop-sets seamless, it solves the short sound problem, and it can play sound...New ReleasesA Guide to Parallel Programming: Drop 5 - Guide Preface, Chapters 1 - 7, and code: This is Drop 5 with Guide Preface, Chapters 1 - 7, Appendix B, Glossary, and References, and the accompanying code samples. This drop requires Visu...CC.Hearts Screen Saver: CC.Hearts Screen Saver 1.0.10.610: The third release of CC.Hearts Screen Saver. Key features are: Further performance enhancements Keyboard commands (Press ? for help) Help Popu...Fiddler Delayed Responses Extension: v1 beta: UI improvement . drag and drop . session markers . icons . layout Algorithm review . Performance issues Thanks to Eric Lawrence for his ideas.FontViewer 2010: FontViewer 2010 (Codename Eraser): This is the installer for the development version ("Eraser") of FontViewer 2010. Because many of the features are under development, functionality...Genuilder: Genuilder 1.2: First release of Genuilder.Extensibility.ImageResizer for Albulle: ImageResizer1.0-bin: Première version. Permet de déployer des images dans un système de fichier (local).imdb movie downloader: myImdb 0.9.5: myImdb 0.9.5KooBoo Image Gallery: Beta 4: This new version has a new example using s3slider script http://www.serie3.info/s3slider/demonstration.html thanks to mshimao Now there are two pl...LogikBug's IoC Container: LogikBug's IoC Container v1.1.1: In this release: I extended the Extensibility namespace. Fixed a few minor issues with the Extensibility namespace.LRS: jlrs: asdfaLRS: jlrs src: jlrs srcMiniTwitter: 1.14: MiniTwitter 1.14 更新内容 修正 リストのインポートをキャンセルしてもタイムラインの名前がリストの名前になるバグを修正 OAuth の承認を取り消した後、再ログインできないバグを修正 インポートするリストを選択せずにインポートをクリックすると落ちるバグを修正 追加 ...NETris - ASP .NET, AJAX, Web Service based Tetris Game: NETris - Source Code and Documentation: Fully functional prototype. Please note that documentation is written in the form of a report as the project was an assignment at Coventry University.Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.10: Minor release, incremental changes to sample website and UI templates.Opalis Community Releases: Integration Pack for Standard OIS Logging: The Integration Pack for Standard OIS Logging provides extended Policy Logging functions to OIS and MSSQL. This Integration Pack adds the followin...PicassoCms: 0.6: More intuitive UI, new controlsPowerAuras: PowerAuras-3.0.0K-beta2: New Auras: Item Name Equipment Slot Tracking Changes from beta1 5 new aura textures Fixed Tracking bug Added graphical equipment slot sele...PowerPivot Sample Data: PowerPivot for Excel Tutorial Sample Data-v.2: The PowerPivot Tutorial Sample Data-Version 2 download includes a variety of data sources that you can use to complete the tutorial in the PowerPiv...Powwa: First build: Unpack & built with NetBean 6.8Quick Performance Monitor: Version 1.4: Added functionality to add and remove performance counters at run time. Also added saving and loading to file so sets of performance counters can b...Resonance: TrainNode Client Library: Libraries to access the TrainNode ServiceSharePoint 2010 Taxonomy Import Utility: TaxonomyBuilder Version 1.0.2: New Features Added support for additional term labels per term Added support for Term Set Owners Added support for Term Set stakeholders Upda...Silverlight for Umbraco Media Objects (SUMO): Community Tech Preview: The CTP for SUMO is now live, feedback appreciated!Silverlight Reporting: Initial Release: This is the first release of the code. It includes the source code from Pete's blog post article on Silverlight reporting.Simple.NET: Simple.Mocking 1.0.0.7: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...Smart Voice: Smart Voice 0.2.2: Changelog: Fixed more bugs Added a readme into the archiveSoulHackers Demon Unite(Chinese version): WPFClient pre alpha 2: pre alpha 2, need your feedbackSquiggle - A Free open source Lan Messenger: Squiggle 1.5: File Transfer capability added (With drag/drop support) Message text box maintains history of last 10 messages and you can retrieve them by CTRL+U...SSIS Expression Editor & Tester: Expression Editor and Tester v1.0.1.0: Minor updated release of expression editor tool and editor control. Download and extract the files to get started, no install required. Changes Si...StreamInsight Samples: GregLow HighwayMonitor Samples: Initial Upload of GregLow HighwayMonitor StreamInsight samples. These samples are used in the upcoming free eClinic for StreamInsight and have been...tChat - ASP.NET, Ajax & Web Service based Chat Room: tChat Source Code and Documentation: Functional prototype. T-SQL scripts can be found in the SQL folder. Please note that the documentation is written in a format of a report for a "du...Transform Config: Initial Release: This is the initial release of the project. It's all been thrown together quickly so it's lacking error handling etc, but it's still fully function...UrzaGatherer: UrzaGatherer v2.0.2: Integrate the support of SQL Server Compact Edition 3.5 SP2 for a better portability.Value Injecter: map anything to anything anyway you might imagine: ValueInjecter 1.9: Features map anything to anything flattening unflattening includes sample projects for: asp.net mvc asp.net web-forms win-formsVCC: Latest build, v2.1.30610.0: Automatic drop of latest buildVisual Studio DSite: Picture SlideShow Viewer (Visual C++ 2008): A picture slidershow viewer.VorbisPlayer: VorbisPlayer: The first release of the Silverlight VorbisPlayer, including source code and example files.WCF 4 Templates for Visual Studio 2010: AnonymousOverHttps Template: Produces a WCF service application configured for anonymous calls over HTTPS/SSL. Supplies a BasicHttpBinding default configured for Transport secu...Most Popular ProjectsHaoRan_TokyoTyrantClient.NET Transactional File ManagerSOLID by exampleMemetic NPC Behavior ToolkitSharpotify - Spotify .Net LibraryWCF 4 Templates for Visual Studio 2010SFTP Component for .NET CSharp, VB.NET, and ASP.NETUltimate FTP Component for .NET C#, VB.NET and ASP.NETAnurag Pallaprolu's Code RepositoryBigfootMVCMost Active ProjectsCommunity Forums NNTP bridgejQuery Library for SharePoint Web ServicesRhyduino - Arduino and Managed Codepatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCassandraemonBlogEngine.NETMediaCoder.NETAndrew's XNA HelpersStyleCop

  Read the article

• CodePlex Daily Summary for Thursday, March 25, 2010

  CodePlex Daily Summary for Thursday, March 25, 2010New ProjectsAccessibilityChecker: Accessibility Checker is custom feature developed to check accessibility requirements in a SharePoint PortalAnne Epstein - Personal Repository: Project Description This project contains multiple samples with various snippets and projects from blog posts, user group talks, and conference se...BatterySaver: BatterySaver is a simple application, in C#, that allows laptop users to perform actions based on battery notification events (switching from batte...dtxJson: C# coded JSON (JavaScript Object Notation) parser.eCamp: eCamp is a modular and extensible electronic camp management application. Written in C# and WPF, it follows many of the latest technology trends su...epdevplatform: epdevplatformERP: Environment Colaborative Resources ProjectFaceLight - Simple Silverlight Face Detection: FaceLight is a simple facial recognition method that can be used with Silverlight 's webcam. It searches for a certain sized skin color region in a...Forum PAF - The Open Source .Net Forum - From Viet Nam - By Thomas John (jntpaf): The Open Source .Net Forum - From Viet Nam ------------------------- Các phần mềm cần thiết để chạy Forum PAF: 1. .Net Framework 2.0 (trở lên) 2....Gawam Savel - Sistema de Avaliação Eletrônica: Projeto de TCC ...Html5 Helpers and tools for Asp.Net MVC: Html5 Helper aims to provide a generic helper context to produce HTML5 content in ASP.NET MVCIfeanyi Echeruo's WPF Recipes: WPF Recipes C# code samples showing how to solve some non-trivial problems in WPFITM 495 - iPhone App: school project iphone appKnowledge Exchange: Stack Overflow Inspired Knowledge ExchangeMailCheck: Mail检查程序。NetBoard: NetBoard is a lightweight system designed to act as the Blackboard in a micro-blackboard architecture for use within an OO system - even when withi...RodBass.com: RodBass.comsemanticrest: This is a vision of semantics mashups for rest web services.StatSpaceUI: StatSpaceUITFS Merge Tool: A small tool for merging changesets between TFS branches.The Interface To End All Interfaces: We interfaced everything, so that you can implement anything...Tim - Open Source Projects And Samples: Open source projects / Samples for http://tim.bellette.netWindows XNA: A place for those who enjoy there XNA Game Studio programing on Windows. For a place to share XNA Game Studio games for Windows in English. I'm loo...XAML Code Snippets addin for Visual Studio 2010: Provides support for adding XAML code snippets in the Visual Studio 2010 code editor for XAML in WPF and Silverlight projects.New ReleasesAnyWorks: AnyWorks1.2Bin: AnyWorks1.2AnyWorks: AnyWorks1.2Src: AnyWorks1.2AppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.0: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Test On:Win 7 (64x) Note: Must run as Administrator !!!ASP.NET Wiki Control: Release 1.1: - Modified text and varchar columns to nvarchar for unicode support. - Modified path info logic to disable its use if the page's raw url currently...B&W Port Scanner: Black`n`White Port Scanner 2.0: Fast Cross-Platform Port Scanner with Vulnerability Detection Tools. 3 vulnerability detection tools are included in this version: - Detection of ...BatterySaver: 0.1: Initial Release This is the initial release of the application. The application is very much beta with lots of changes upcoming. Known Issues The...BatterySaver: 0.2: Changes+ Add support for enabling and disabling devices (6)Compare .NET Objects: Version 1.2.0.0: New Features: Compare Generic Classes that Implement IList Indexers Compare Datasets Compare DataTables Compare DataRows Consider IList and...Controlled Vocabulary: 1.0.0.3: System Requirements Outlook 2007 / 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running instances in the b...crudwork is a library of reuseable classes for developing .NET applications: crudwork 2.2.0.2: minor changes. new guid for msi and new strongly named guidDigitallyCreated Utilities: DigitallyCreated Utilities v1.0.0: This release is the v1.0.0 version of DigitallyCreated Utilities. Binary Distribution The binary distribution contains the following: Compiled bin...DirectQ: Release 1.8.2: Adds several bugfixes and improved functionality. This release supersedes 1.8.1 which will be shortly removed. A very big THANK YOU to everyone w...DotNetNuke® Community Edition: 05.03.01: Major Highlights Issue fixed issue with the email notifications where the From and To addresses were swapped. Issue fixed with signature ch...Encrypted Notes: Encrypted Notes 1.5: This is the latest version of Encrypted Notes (1.5). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...EnhSim: Release v1.9.8.1: Release v1.9.8.1Adding in the Glyph of Flame Shock changes in 3.3.3FlickrNet API Library: 3.0 Beta: A brand new version of the FlickrNet library, exposing 100% of the Flickr API's methods, along with streamlined class and method names. All classe...Forum PAF - The Open Source .Net Forum - From Viet Nam - By Thomas John (jntpaf): Forum PAF - The Open Source .Net Forum: A, Các phần mềm cần thiết để chạy Forum PAF: 1. .Net Framework 2.0 (trở lên) 2. Ajax Extension 1.0 (trở lên) 3. Sql Server 2005 (Sql Server Expr...HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: HydroDesktop 0.7.3735 Alpha Installer: This is the testing release of the HydroDesktop 0.7 alpha version. Features supported in this version include: Search for data and download of Hydr...MDownloader: MDownloader-0.15.9.56953: Fixed Uploading.com links detection.MiniTwitter: 1.10: MiniTwitter 1.10 更新内容 追加 未読管理時に未読数をタブに表示する機能を実装 サイレントモードを実装（通知領域アイコンを右クリックして出るメニューから切り替え） 修正 「お気に入りワードを含む項目だけ表示する」オプションが機能していなかった問題を修正NoteExpress User Tools (NEUT) - Do it by ourselves!: NoteExpress User Tools 1.9.1: 测试版本：NoteExpress 2.5.0.1147 #修正一个改动的bugOneCMS: OneCMS 2.6: OneCMS 2.6 is finally here! Along with various bug fixes 2.6 also brings with it many new features such as the videos module, plugins system, and m...Quantity System Framework: Quantity System Calculator 1.1.9.93: Experience the new edition of the quantity system with text support and function treated as values now you can multiply functions and divide funct...Selection Maker: Selection Maker 1.4: some minor bugs fixed. icon added for running and uninstalling the application.sPATCH: sPatcher v0.8a: + Disabled patchers proxy settings to increase connection speed sPatch - Server Example *Contains a sample Patch that "downgrades" PWI 1.4.2 Clien...VSTT 2008 Quick Reference Guide: VS Performance Testing Quick Reference V2.0: Visual Studio Performance Testing Quick Reference Guide (Version 2.0)WeatherBar: WeatherBar 2.0: WeatherBar 2.0 Changelog: Introduced application settings. Modified UI. Ability to switch between Fahrenheit and Celsius (application-wide). ...WillStrohl.LightboxGallery Module for DotNetNuke: WillStrohl.LightboxGallery v1.02.01: This version of the Lightbox Gallery Module adds the following features: Upgraded the Autocomplete jQuery plugin Fixed an IE8 error that was occu...Windows XNA: Base Defense Alpha 0.339: Alpha 0.338 had a really bad bug that made the game crash, that is what I get for coding after 3am... I also made some AI for the Raptor. So now it...WPF Dynamic Data Display: Silverlight DynamicDataDisplay v0.2 - Spring 2010: Silverlight version of WPF DynamicDataDisplay charting library The version 0.2 shows a greater performance comparing with version 0.1 while having...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesFarseer Physics EngineBlogEngine.NETFacebook Developer ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModulePHPExcelTable2ClassFluent Ribbon Control SuiteLINQ to Twitter

  Read the article

• Integrating NetBeans for Raspberry Pi Java Development

  - by speakjava

  Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

  Read the article

• Microsoft Channel 9 Interviews Mei Liang to Introduce Sample Browser Extension for Visual Studio 2012 and 2010

  - by Jialiang

  This morning, Microsoft Channel 9 interviewed Mei Liang - Group Manager of Microsoft All-In-One Code Framework - to introduce the newest Sample Browser extension for Visual Studio 2012 &2010.   This extension provides a way for developers to search and download more than 4500 code samples from within Visual Studio, including over 700 Windows 8 samples and more than 1000 All-In-One Code Framework customer-driven code samples. Mei shows us not only the extension, but also the standalone version of the Sample Browser.   http://channel9.msdn.com/Shows/Visual-Studio-Toolbox/Sample-Browser-Visual-Studio-Extension   Microsoft All-In-One Code Framework, working in close partnership with the Visual Studio product team and MSDN Samples Gallery, developed the Sample Browser extension for both Visual Studio 2012 and Visual Studio 2010.  As an effort to evolve the code sample use experience and improve developers' productivity, the Sample Browser allows programmers to search, download and open over 4500 code samples from within Visual Studio with just a few simple clicks.  If no existing code sample can meet the needs, developers can even request a code sample easily from Microsoft thanks to the free “Sample Request Service” offered by Microsoft All-In-One Code Framework.  Through innovations, the teams hope to put the power of tens of thousands of code samples at developers’ fingertips. In short 3 months, the Sample Browser Visual Studio Extension has been installed by 100K global users.  It is also selected as one of the six most highly regarded and commonly used tools for Visual Studio that will make your programming experience feel like never before.   Got to love the All-In-One Code Framework team! You guys know this is THE go to source for code samples. Get this extension and you'll never need to leave VS2012 (well except for bathroom trips, but that's TMI anyway... ;) Read More... From: Greg Duncan (Author of CoolThingOfTheDay) 9/6/2011 12:00 AM The one software design pattern that I have used in just about every application I’ve written is “cut-and-paste,” so the new “Sample Browser” – read sample as a noun not an adjective – is a great boon to my productivity. Read More... From: Jim O'Neil (Microsoft Developer Evangelist) 9/28/2011 12:00 AM Install: http://aka.ms/samplebrowservsx Microsoft All-In-One Code Framework also offers the standalone version of Sample Browser.   The standalone version is particularly useful to Visual Studio Express edition or Visual Studio 2008 users, who cannot install the Sample Browser Visual Studio extension.   From Grassroots’ Passion for Developers to the Innovation of Sample Browser This Sample Browser has come a very long way improving the code sample use experience.  The history can be traced back to a grass-root innovation three years ago.   In early 2009, a few MSDN forum support engineers observed that lots of developers were struggling to work in Visual Studio without adequate code samples. Programming tasks seem harder than they should be when you only read through the documentation.  Just a couple of lines of sample code could answer a lot of questions.   They had a brilliant idea: What if we produce code samples based on developers’ frequently asked programming tasks in forums, social networks and support incidents, and then aggregate all our sample code in a one-stop library to benefit developers?  And what if developers can request code samples directly from Microsoft, free of charge?  This small group of grassroots at Microsoft devoted their nights and weekends to prototyping such a customer-driven code sample library.  This simple idea eventually turned into “Microsoft All-In-One Code Framework”, aka. OneCode.  With the support from more and more passionate developers at Microsoft and the leaders in the Community and Online Support team and Microsoft Commercial Technical Services (CTS), the idea has become a continually growing library with over 1000 customer-driven code samples covering almost all Microsoft development technologies.  These code samples originated from developers’ common pains and needs should be able to help many developers.  However, if developers cannot easily discover the code samples, the effort would still be in vain.  So in early 2010, the team started the idea of Sample Browser to ease the discovery and access of these samples.  In just two months, the first version of Sample Browser was finished and released by a passionate developer.  It was a very simple application, only supporting the basic sample offline search.  Users had to download the whole 100MB sample package containing all samples first, and run the Sample Browser to search locally.   Though developers could not search and download samples on-demand, this simple application laid a solid foundation for the team’s continuous innovations of Sample Browsing experience. In 2011, MSDN Samples Gallery had a big refresh.  The online sample experience was brought to a new level thanks to its PM Steven Wilssens and the gallery team’s effort.  Microsoft All-In-One Code Framework Team saw the opportunity to realize the “on-demand” sample search and download feature with the new gallery.  The two teams formed a strong partnership to upload all the customer-driven code samples to MSDN Samples Gallery, and released the new version of Sample Browser to support “on-demand” sample downloading in April, 2011.  Mei Liang, the Group Manager of Microsoft All-In-One Code Framework, was interviewed by Channel 9 to demo the Sample Browser.  Customers love the effort and the innovation!!  This can be clearly seen from the user comments in the publishing page.   It was very encouraging to the team of All-In-One Code Framework. The team continues innovating and evolving the Sample Browser.  They found the Visual Studio product team this time, and integrated the Sample Browsing experience into the latest Visual Studio 2012.  The newly released Sample Browser Visual Studio extension makes good use of Visual Studio 2012 IDE such as the new Quick Launch bar, the code editor, the toolbar and menus to offer easy access to thousands of code samples from within the development environment.   The Visual Studio Senior Program Manager Lead - Anthony Cangialosi, the Program Manager - Murali Krishna Hosabettu Kamalesha, the MSDN Samples Gallery PM – Steven Wilssens, and the Visual Studio Senior Escalation Engineer - Ed Dore shared lots of insightful suggestions with the team.  Thanks to the brilliant cross-group collaboration inside Microsoft, tens of new features including “Local Language Support” and “Favorite Samples”, as well as a face-lifted user interface, were added to further enhance the user experience. Since the new Sample Browser Visual Studio extension was released, it has received over 100 thousand downloads and five-star ratings.  A customer told the team that he officially falls in LOVE with Microsoft All-In-One Code Framework.   The Sample Browser Innovation for Developers Never Stops! The teams would never stop improving the Sample Browser for developers’ easier lives.   The Microsoft All-In-One Code Framework, Visual Studio and MSDN Samples Gallery teams are working closely to develop the next version of Sample Browser.  Here are the key functions in development or in discussion.  We hope to learn your feedback of the effort.  You can submit your suggestions to the official Visual Studio UserVoice site.  We look forward to hearing from you! 1) Offline Sample Search This is one of the top feature requests that we have received for Sample Browser.   The Sample Browser will support the offline search mode so that developers can search downloaded code samples when they do not have internet access.  This is particularly useful to developers in Enterprises with strict proxy settings. 2) Code Snippet Support and Visual Studio Editor Integration Today, the Sample Browser supports downloading and opening sample project.   However, when developers are searching for code samples, a better user experience would be to see the code snippets in the search result first.  Developers can quickly decide if the code snippet is relevant.   They can also drag and drop the code snippet into the Visual Studio Editor to solve some simple programming tasks.  If developers want to learn more about the sample, they can then choose to download the sample project and open it in Visual Studio. 3) Enterprise Sample Sharing and Searching Large enterprises have many code samples for their own internal tools and APIs that are not appropriate to be shared publicly in MSDN Samples Gallery.   In that case, today’s Sample Browser and MSDN Samples Gallery cannot help these Enterprise developers.  The idea is to create a Code Sample Repository in TFS, and provide an additional Visual Studio extension for Enterprise developers to quickly share code samples to TFS.  The Sample Browser can be configured to connect to the TFS Code Sample Repository to search for and download code samples.  This would potentially enable the Enterprise developers to be more productive. 4) Windows Store Sample Browser With the upcoming release of Windows RT and Microsoft Surface, developers are facing a completely new world of application platform.   Not like laptop, people would often use Microsoft Surface in commute and in travel.  Internet may not be available.  Today’s Visual Studio cannot be installed and run on Windows RT, however, our enthusiastic developers would hope to spend every minute on code.  They love code!   The idea is to create a Windows Store version of Sample Browser. Search and download samples from the online Samples Gallery when the user has internet access. Browse the sample code files and learn the sample documentation of downloaded samples with or without internet access.   In addition to the "browse” function, the Sample Browser could further support “bookmark”, “learning notes”, “code review”, and “quick social sharing". Make full use of the new touch and Windows Store App UI to give developers a new “relaxing” code browsing and learning experience, anytime, anywhere. With Windows Store Sample Browser, developers can enjoy A new relaxing and enjoyable experience for developers to learn code samples You do not have to sit in front of desk and formally open Visual Studio to read code samples.  Many developers get sub-health due to staying in front of desk for a very long time.  With Windows RT, Microsoft Surface and this Windows Store Sample Browser combining with the online MSDN Samples Gallery, developers can sit in a sofa, relaxingly hold the tablet and enjoy to learn their beloved sample code with detailed documentation. Anytime, anywhere Whether you have internet access or not, whether you are at home, in office, or in commute/airplane, developers can always easily access and browse the sample code. Lightweight and fast Particularly for learning a small sample project, the Windows Store Sample Browser would be more lightweight and faster to open and browse the sample code. Please submit your feedback and suggestion to Visual Studio UserVoice.  We look forward to hearing from you and deliver a better and better sample use experience.  Happy Coding!   Special Thanks to People working behind the latest release of Sample Browser Visual Studio Extension and the great partnerships!

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352  | Next Page >