Search Results

Search found 1020 results on 41 pages for 'car'.

Page 35/41 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Which Linux distribution for vehicle LCD instrument panel

    - by Brent
    I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

    Read the article

  • Laptop Acer Travelmate 4050 takes over 10 Mins to POST

    - by Belliez
    Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

    Read the article

  • Raid 5 with hot spare or RAID 10 with no hot spare?

    - by Boden
    Yes, this is on of those "do my job for me" questions, have some pity:) I'm at the limit for what I can do with the number of hard drives in a server without spending a substantial amount of money. I have four drives left to configure, and I can either set them up as a RAID 5 and dedicate a hot spare, or a RAID 10 with no hot spare. The size of each will be the same, and the RAID 5 will offer enough performance. I'm RAID 5 shy, but I also don't like the idea of running without a hot spare. I'm not so interested in degraded performance, but the amount of time the system is without adequate redundancy. The server and drives are under a 13x5 4 hour response contract (although I happen to know that the nearest service provider is at least 2-3 hours away by car in the winter). I should note that the server also has two RAID 1 arrays which would also be protected by the hot spare. Why don't they make drive cages with 9 bays! Heh.

    Read the article

  • Batch Script to Trim lines in text to first 30 or 50 characters only

    - by SuperUserMan
    I am now new to scripts but i find it really difficult understanding "for" command (especially with that tokens and delimiters etc) . Saying so, i think that for command can be used to do what i am doing. If its not and there is an easier way, ignore my ignorance :( Say i have multiple lines in a text file abc.txt with each line starting and ending with " (quotes) E.g. a file of 3 lines "hey what is going on @mike220. I am working on your car. Its engine is in very bad condition" "Because if you knew, you'd get shredded and do it with certainty" "@honey220 Do you know someone who has busted their ass on a diet only for results to come to a screeching halt after a few weeks" How can i trim each line, within the quotes, to a Fixed length say 30 or 50 or 100 characters (including spaces) I want to enter the number of character in batch and it can trim accordingly and produce a file def.txt with trimmed lines within quotes. Say i enter 50, results of above example should be "hey what is going on @mike220. I am working on you" "Because if you knew, you'd get shredded and do it" "@honey220 Do you know someone who has busted their" Thanks P.S. if you use For command, kindly please explain the command. EDIT: Though the answer provided worked, there is an issue with non english text. I am getting garbled text in Output file for non english text in input file . Any help @barlop here is the nonenglish text ( 1 line) "???? ?? ???? ?? ???? ???? ??? ?????? ???"

    Read the article

  • CakePHP 3-level-deep model associatons

    - by user357452
    Hi, I am relatively new to CakePHP, I am doing fine with the documentation, but I've been trying to find a way out to this problem for weeks and I don't seem to find the solution, I am sure it is easy and maybe even automagicaly doable, but I just don't know how to find it (maybe I don't know the jargon for these kind of things) My model structure is like this: <?php class Trip extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Start' => array( 'className' => 'Place', 'foreignKey' => 'start_id' ), 'End' => array( 'className' => 'Place', 'foreignKey' => 'end_id' ), 'Transport' => array( 'className' => 'Transport', 'foreignKey' => 'transport_id' ) ); } ?> <?php class Place extends AppModel { var $belongsTo = array( 'User' => array( 'className' => 'User', 'foreignKey' => 'user_id' ), 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id' ), 'State' => array( 'className' => 'State', 'foreignKey' => 'state_id' ), 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id' ) ); var $hasMany = array( 'PlaceStart' => array( 'className' => 'trip', 'foreignKey' => 'start_id', 'dependent' => false ), 'PlaceEnd' => array( 'className' => 'trip', 'foreignKey' => 'end_id', 'dependent' => false ) ); } ?> <?php class State extends AppModel { var $belongsTo = array( 'Country' => array( 'className' => 'Country', 'foreignKey' => 'country_id', 'conditions' => '', 'fields' => '', 'order' => '' ) ); var $hasMany = array( 'City' => array( 'className' => 'City', 'foreignKey' => 'city_id', 'dependent' => false ) ); } ?> ... and so forth with User, City, Country, and Transport Models. What I am trying to achieve is to get all the information of the whole tree when I search for a Trip. <?php class TripController extends AppController { function index() { debug($this->Trip->find('first')); } } Outputs Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [user_id] => 4 [start_id] => 2 [end_id] => 1 [title] => My trip [transport_id] => 1 ) [User] => Array ( [id] => 4 [name] => John Doe [email] => [email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 1 [direccion] => Lincoln Street ) [End] => Array ( [id] => 1 [user_id] => 4 [country_id] => 1 [state_id] => 1 [city_id] => 4 [address] => Fifth Avenue ) [Transport] => Array ( [id] => 1 [name] => car ) ) Here is the question: How do I get in one query all the information down the tree? I would like to have something like Array ( [Trip] => Array ( [id] => 6 [created] => 2010-05-04 00:23:59 [User] => Array ( [id] => 4 [name] => John Doe [email] => [email protected] ) [Start] => Array ( [id] => 2 [user_id] => 4 [Country] => Array ( [id] => 1 [name] = Spain ) [State] => Array ( [id] => 1 [name] = Barcelona ) [City] => Array ( [id] => 1 [name] = La Floresta ) [address] => Lincoln Street ) [End] => (same as Start) [title] => My trip [Transport] => Array ( [id] => 1 [name] => car ) ) ) Can CakePHP create this kind of data? Not only for $this->Model->find() but also for $this->paginate() as for example: // filter by start if(isset($this->passedArgs['start'])) { //debug('isset '.$this->passedArgs['start']); $start = $this->passedArgs['start']; $this->paginate['conditions'][] = array( 'OR' => array( 'Start.address LIKE' => "%$start%", 'Start.State.name LIKE' => "%$start%", 'Start.City.name LIKE' => "%$start%", 'Start.Country.name LIKE' => "%$start%" ) ); $this->data['Search']['start'] = $start; } It seems like a rough question but I am sure this is extensively done and documented, I'd really appreciate any help. Thanks Cheers Naoise

    Read the article

  • SQLAuthority News – Tips for Traveling to Nepal

    - by pinaldave
    If you are a regular reader of this blog, you might know that I travel nearly 20+ days out of 30 days in a month. There are cases when I don’t have a chance to go home for an entire month and my family has to travel to different cities just to meet me. During my recent visit, one of my acquaintances suggested that I should blog about my travel experiences as well. This can be helpful to others who are traveling to the country or city. I have previously written about my experience about all the airlines in India. I would be writing about a few tips about traveling to the beautiful country Nepal today. Kathmandu, the capital of Nepal is very scenic. There are lots of historical places to see and visit. I was fortunate enough to stopover the Pashupatinath Temple, Bhaktapur, Vasantpur and the temple of Kumari Goddess. I also visited casinos there, but even if  I have stayed in Las Vegas for 3 and a half years before, I was not keen on them so I left the casinos just like what I did in Las Vegas . I also traveled to the famous Thamel area by car. Here are my quick tips for anyone who is planning to visit Nepal. They are not categorized but just written in the order that came to my mind. Please note that if you are an Indian, you will get a special privilege everywhere in Nepal, beginning right from the Indian airports. Use the expression “Nameste!” If you want to greet any Indian or Nepali. Indian Nationals do not need visa/passport to enter Nepal. In fact, Indian Nationals can just walk in to Nepal without any passport; but should have any valid Indian ID. There is no use of a passport since it will not be stamped at any immigration ports, whether in India or Nepal. Indian currency is widely accepted everywhere. However, please bring only Rs. 100 bills/notes as Rs. 500 or Rs. 1000 are not accepted. However, casinos there will accept larger bills. Indian National Language – Hindi is widely spoken and understood everywhere. I did not find a single person who had trouble speaking it. Nepali language uses the scripting language as Devnagari, which is similar to Hindi. Here, you will find food of almost every country.  The taste of Nepali food is authentic and very delicious. It is very safe to travel and move around in Kathmandu (despite what media suggests). However, it will really help if you have a friend who speaks Nepali. You can negotiate a few deals and cut off to almost 1/5 of the original quoted price of products sold here. If you are from Gujarat, India – you will find Nepali language sharing many common words. Temples are everywhere, so do not miss to visit a few of them. Pashupatinath is a must. Only followers of Hindu religion (from Nepal and India only) are allowed in most of the holy places. Camera is allowed everywhere except on the holy places. Now it is your turn to share your opinions or any suggestions. I think Nepal is a great country as there are lots of places to visit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

    Read the article

  • Wine 1.6.2-Trying to switch to 32-bit Wineprefix from 64-bit Wine (Trusty 14.04). Can anyone help me out?

    - by AlternateSteve90
    Hello fellow Ubuntu users, I'm having a little trouble with Wine 1.6.1 and I was wondering if someone could help me out. I recently downloaded some 32-bit games that I'd wanted to try(BeamNG Drive and Bugbear's Next Car Game demo) and I had run into some trouble trying to get either of these games to run. So I came across a couple pieces of advice on the 'Net, one here on the Ubuntu community site and the other at BeamNG's forums, on how to create a 32-bit wineprefix on a 64-bit setup. I managed to be able to create the wine32 folder, but now I'm having trouble making it my default Wine setup. Anybody have any idea how I can do that? I'll post the URLs for said advice, btw: http://www.beamng.com/threads/1788-Installing-DRIVE-under-Linux-via-Wine How do I create a 32-bit WINE prefix? Here's what I've tried so far in the Terminal: steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' wine: created the configuration directory '/home/steven/wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10ee890, overlapped 0x10ee89c): stub wine: configuration in '/home/steven/wine32' has been updated. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=$HOME/.wine32 wine dxsetup.exe wine: created the configuration directory '/home/steven/.wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x103e2b8, overlapped 0x103e2d0): stub fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10fe890, overlapped 0x10fe89c): stub wine: configuration in '/home/steven/.wine32' has been updated. wine: cannot find L"C:\windows\system32\dxsetup.exe" steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win64 winecfgsteven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win32 winecfg wine: WINEARCH set to win32 but '/home/steven/.wine' is a 64-bit installation. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH=win32 wine wineboot steven@steven-HP-Pavilion-17-Notebook-PC:~$ So, yeah. TBH, though, I'm far from an expert and perhaps I've been going about it all the wrong way. In the meantime, I'll try to keep looking for solutions on my own, but if anybody can help me solve this dilemma, especially if anyone happens to own any of these two games in particular, I'd appreciate it. :)

    Read the article

  • Managing User & Role Security with Oracle SQL Developer

    - by thatjeffsmith
    With the advent of SQL Developer v3.0, users have had access to some powerful database administration features. Version 3.1 introduced more powerful features such as an interface to Data Pump and RMAN. Today I want to talk about some very simple but frequently ran tasks that SQL Developer can assist with, like: identifying privs granted to users managing role privs assigning new roles and privs to users & roles Before getting started, you’ll need a connection to the database with the proper privileges. The common ROLE used to accomplish this is the ‘DBA‘ role. Curious as to what the DBA role is actually comprised of? Let’s find out! Open the DBA Console First make sure you’re connected to the database you want to manage security on with a privileged administrator account. Then open the View menu and select ‘DBA.’ Accessing the DBA panel ‘Create’ a Connection Click on the green ‘+’ button in the DBA panel. It will ask you to choose a previously defined SQL Developer connection. Defining a DBA connection in Oracle SQL Developer Once connected you will see a tree list of DBA features you can start interacting with. Expand the ‘Security’ Tree Node As you click on an object in the DBA panel, the ‘viewer’ will open on the right-hand-side, just like you are accustomed to seeing when clicking on a table or stored procedure. Accessing the DBA role If I’m a newly hired Oracle DBA, the first thing I might want to do is become very familiar with the DBA role. People will be asking you to grant them this role or a subset of its privileges. Once you see what the role can do, you will become VERY protective of it. My favorite 3-letter 4-letter word is ‘ANY’ and the DBA role is littered with privileges like this: ANY TABLE privs granted to DBA role So if this doesn’t freak you out, then maybe you should re-consider your career path. Or in other words, don’t be granting this role to ANYONE you don’t completely trust to take care of your database. If I’m just assigned a new database to manage, the first thing I might want to look at is just WHO has been assigned the DBA role. SQL Developer makes this easy to ascertain, just click on the ‘User Grantees’ panel. Who has the keys to your car? Making Changes to Roles and Users If you mouse-right-click on a user in the Tree, you can do individual tasks like grant a sys priv or expire an account. But, you can also use the ‘Edit User’ dialog to do a lot of work in one pass. As you click through options in these dialogs, it will build the ‘ALTER USER’ script in the SQL panel, which can then be executed or copied to the worksheet or to your .SQL file to be ran at your discretion. A Few Clicks vs a Lot of Typing These dialogs won’t make you a DBA, but if you’re pressed for time and you’re already in SQL Developer, they can sure help you make up for lost time in just a few clicks!

    Read the article

  • Welcome to the SOA &amp; E2.0 Partner Community Forum

    - by Jürgen Kress
    With more than 200 registrations the SOA & E2.0 Partner Community Forum is a huge success!   Conference program Is available online: http://tinyurl.com/soaforumagenda Agenda Tuesday March 15th 2011 12:15 Welcome & Introduction – Hans Blaas & Jürgen Kress, Oracle 12:30 Oracle Middleware Strategy and Information on Application Grid and Exalogic - Andrew Sutherland, Oracle 13:15 Managing Online Customer, Partner and Employee Engagement Oracle E2.0 Solutions - Andrew Gilboy, Oracle 14:00 Coffee Break 14:30 Partner SOA/ BPM Reference Case – Leon Smiers, Capgemini 15:15 Partner WebCenter/ UCM Reference Case – Vikram Setia, Infomentum 16.00 Break 16.30 SOA and BPM 11gR1 PS3 Update – David Shaffer 17:00 Why specialization is important for Partners – Nick Kritikos, Hans Blaas & Jürgen Kress 17:45 Social Event   Wednesday March 16th 2011 09.00 Welcome & Introduction Day II 09.15 Breakout sessions Round 1 SOA Suite 11g PS3 & OSB Importance of ADF & Jdeveloper SOA Security IDM WebCenter PS3, Whats New E2.0 Sales Plays 10.30 Break 10.45 Breakout sessions Round 2 WebCenter PS3, Whats New Applications Management Enterprise Manager and Amberpoint ADF/WebCenter 11g integration with BPM Suite 11g Importance of ADF & Jdeveloper JCAPS & OC4J migration opportunities for service business 12.00 Lunch 13.00 Breakout sessions Round 3 BPM 11g, Whats New Universal Content Management! 11g SOA Security IDM E2.0 Surrounding Products: ATG, Documaker, Primavera Middleware Industry Value Propositions & Sales Plays 14.30 Break 14.45 Fusion Applications, Rajan Krishnan, Oracle 15.30 SOA & E2.0 Summary & Closing, Hans Blaas & Jürgen Kress, Oracle 15.45 Finish & Departure 16:00 Bus departure   Capgemini Nederland BV Papendorpseweg 100 3500 GN Utrecht The Netherlands Tel: +31 30 689 00 00 For a detailed routedescription by car or public transport please visit: http://www.nl.capgemini.com/pdf/Papendorp_UK.pdf Hotel In case you have not booked your hotel yet, please make your own hotel reservation. You can book your hotel room at the 'Hotel Vianen' at a special rate, by using the Oracle booking code: DDG VIA-GF41422. One night package € 110,- for a single room, including breakfast. Kindly secure your hotel room as soon as possible. The number of rooms is limited! Hotel Vianen Prins Bernhardstraat 75 4132 XE Vianen [email protected] The Netherlands [email protected] Arrival on 14th of March and staying at Hotel Vianen. On 15th of March we have arranged a transfer from Hotel Vianen to the Capgemini Offices. The bus is parked in front of the hotel and will leave at 10.15AM (UTC/GMT+1). Logistics Pass with barcode At your arrival you will receive a pass with a barcode. This pass will give you access to the conference building and the different floors within the building. Please make sure to hand in your pass at the registration desk at the end of the day. Arrival by plane Transfer from Schiphol Airport to Capgemini on 15th of March will be arranged by Oracle. A hostess will be welcoming you at the Meeting Point at Schiphol Airport (this is a red and white large cubicle situated next to Delifrance) The buses will depart from Schiphol Airport at 09.00AM, 09.45AM and 10.30AM (UTC/GMT+1).     For future SOA Partner Community Forums  become a member for registration please visit www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA Partner Community Forum,Community,SOA Partner Community,Utrecht 03.2011,OPN,Oracle,Jürgen Kress

    Read the article

  • iPad Impressions

    - by Aaron Lazenby
    So, I spent some quality time with my new iPad on Saturday. Here are things I like/don't like: -- Don't like that it has to sync with iTunes before you use it: I was traveling and left my laptop at home thinking I'd use this iPad thing instead. But the first thing it asked me to do is connect it to a laptop. Ugh. Had to borrow my mother-in-law's MacBook Pro just to get the iPad rolling. -- Like that magazines and newspapers are forever changed: And I think for the better...it's why I bought this thing in the first place. I spent significant time with The New York Times, The Wall Street Journal, Time Magazine and Popular Science on the iPad. Sliding stories around, jumping from section to section, enlarging images = all excellent experiences. Actually prefer iPad magazine to print, which will require a major shift in editorial strategy, summed up by Popular Science's Mark Jannot in his editor's note "What defines a magazine? Curated expertise--not paper." -- Don't like the screwy human factors: I actually enjoy the virtual keyboard (although I think I'm in the minority), but you have to hunch over to look down at what you're typing. Bad technology ergonomics have already jacked my body in various ways. The iPad just introduced a new one.-- Like the multitouch: In fact, it's awesome. Hands down. Probably will have the most lasting impact on the personal computing industry as a whole.   -- Don't like that it's heavy: If you plan to read in bed, you'd better double up on the creatine and curls. Holding this thing up on your own gets pretty uncomfortable. -- Like the Netfilx app: I wanted to watch "The Big Lebowski," so I did. That is all. -- Don't like that people feel 3G is necessary: For $30 a month? Please. I'm already accustomed to limiting my laptop internet use to readily available free wi-fi. Why do I expect anything different with the iPad? Most anyplace I have time to sit and read/use a computer (cafe, airport, you house, library, etc.) has free wi-fi. I can live without web surfing in your car. That's what the iPhone is for. -- Don't like that not everyone was ready in day one: I'm looking at you Facebook. No iPad app for launch? Lame. iPhone apps scaled-up to work on the iPad look grainy and cheap. Not a quality befitting this beautiful $700 piece of glass.Verdict: I'm bringing it to COLLABORATE 08 and seeing if I can go the whole week using only the iPad. If I can trade this thing for my laptop, I know it's a winner. For now, I'm enjoying Popular Science.

    Read the article

  • Healthcare and Distributed Data Don't Mix

    - by [email protected]
    How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

    Read the article

  • Motorola Droid App Recommendations

    - by Brian Jackett
    Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

    Read the article

  • Technology vs. Antiquated Methods

    - by AreYouSerious
    So Here I am talking with my Program lead, about technology, and how while my father is the VP of a major company, he still doesn't have a blackberry, or a smart phone. and I think it's funny. Most people would say it's a generational thing. That because he's older, he dosen't accept technology, and that's why. I have trouble swallowing that because this is the same man, who bought a satellite radio for his car, and made sure that the printer for the house was networked so that his and my mom's laptop could print wirelessly from the living room through their wireless network. I think it has to do with more with necessity, and partially with finical responsibility. My father is very financially conciencious. Think about it yourself. you pay for internet at your home. You have internet access at your office. But if you get a smart phone you're going to pay almost the same amount just for that access. A lot of people take it as just another fixed cost... I'm one of those. I don't even think about it, as I check my facebook from the bus, train, or even while sitting in traffic... The convience of having connection everywhere outweigh the financial responsible person screaming at in the back of my mind. However This conversation lead us to another venue of discussion.... what happens when the power dies. if you left your charger at home, or you phone or navi just stops working... are you going to be able to continue on as you did when it was working... let take the navi as an example... if your navi stops working, how many of you know how to use a map, and navigate? can you even find where you are on a map using the cross streets that your stopped at? This is a skill that unfortunatelly is overlooked these days in the child rearing process. Most people don't see the value, while some others can't do it themselves, so how can they teach their offspring? Take another example.... what if your phone gets lost... or stolen, or you drive over it? do you have the numbers in their memorized? are they recorded somewhere? I know that if it weren't for google sync I wouldn't have them backed up... not sufficiently. And what good does that do if you're in timbuckto and your phone dies, think you can get on the internet to look up those numbers? Don't get me wrong. I'm the first to see the value in technology, and am willing to pay the price to not have to wait for prices to come down. I will pay extra to have that newest thing right now. but let me tell you what.... I know that should I ever procreate it will be a requirement for my offspring (children) to learn how to do something manually before I'll let them use technology. Food for thought?? Let everyone else know what you think.... just sayin'

    Read the article

  • Increasing touch surface (#wp7dev)

    - by Laurent Bugnion
    When you design for Windows Phone 7 (or for any touch device, for that matter, and most especially small screens), you need to be very careful to give enough surface to your users’ fingers. It is easy to miss a touch on such small screens, and that can be horrifyingly frustrating. This is especially true when people are on the move, and trying to hit the control while walking and holding their device in one hand, or when the device is mounted in a car and vibrating with the engine. In my experience, a touch surface should be ideally minimum 60x60 pixels to be easy to activate on the Windows Phone 7 screen (which is, as we know, 800 pixels x 480 pixels). Ideally, I try to make my touch surfaces 80x80 pixels minimum. This causes a few design challenges of course. Using transparent backgrounds However, one thing is helping us tremendously: some surfaces can be made transparent, and yet react to touch. The secret is the following: If you have a panel that has a Null background (i.e. the Background is not set at all), then the empty surface does not react to touch. If however the Background is set to the Transparent color (or any color where the Alpha channel is set to 0), then it will react to touch. Setting a transparent background is easy. For example: <Grid Background="#00000000"> </Grid> or <Grid Background="Transparent"> </Grid> In C#: var grid = new Grid { Background = new SolidColorBrush( Colors.Transparent) }; Using negative margins Having a transparent background reactive to touch is a good start, but in addition, you must make sure that the surface is big enough for my clumsy fingers. One way to achieve that is to increase the transparent, touch-reactive surface, and reposition the element using negative margins. For example, consider the following UI. I changed the transparent background of the HyperlinkButton to Red, in order to visualize the touch surface. In this figure, the Settings HyperlinkButton is 105 pixels x 31 pixels. This is wide enough, but really small in height and easy to miss. To improve this, we can use negative margins, for instance: <HyperlinkButton Content="Settings" HorizontalAlignment="Right" VerticalAlignment="Bottom" Height="60" Margin="0,0,0,-15" /> Notice the usage of negative bottom margin to bring the HyperlinkButton back at the bottom of the main Grid’s first row, where it belongs. And the result is: Notice how the touch surface is much bigger than before. This makes the HyperlinkButton easier to reach, and improves the user experience. With the background set back to normal, the UI looks exactly the same, as it should: In summary: Remember to maximize the touch surface for your controls. Plan your design in consequence by reserving enough room around each control to allow their hit surface to be expanded as shown in this article. Do not cram too many controls in one page. If REALLY needed, use an additional page (or even better: use a Pivot control with multiple pivot items) for the controls that don’t fit on the first one. This should ensure a smoother user experience and improved touch behavior. Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • T-SQL Tuesday - the swag

    - by Rob Farley
    This month’s T-SQL Tuesday is hosted by Kendal van Dyke (@SQLDBA), and is on the topic of swag. He asks about the best SQL Server swag that we’ve ever received from a conference. I can’t say I ever focus on getting the swag at conferences, as I see some people doing. I know there are plenty of people that get around all the sponsors as soon as they’ve arrived, collecting whatever goodies they can, sometimes as token gifts for those at home, sometimes as giveaways for the user groups they attend. I remember a few years ago at my first PASS Summit, the SQLCAT team gave me a large pile of leftover SQL Server swag to give away to my user group – piles of branded things to stop your phone sliding off your car dashboard, and other things. The user group members thought it was great, and over the course of a few months, happily cleared me out of it all. I tend to consider swag to be something that you haven’t earned except by being at a conference, and there was no winning associated with it, it was simply a giveaway item at a sponsor booth. That means I don’t include the HP Mini laptop that was given away at TechEd Australia a few years ago to every attendee, or the SQL Server bag and Camelbak bottle that I was given as a thank-you for writing a guest blog post (which I use as my regular laptop bag and water bottle for work). I don’t even include the copy of Midtown Madness that I got as a door prize at my vey first TechEd event in 1999 (that was a really good game, and even meant that when I went to Chicago last year, I felt a strange familiarity about the place). I don’t want to include shirts in the mix either. I was given a nice SQL Server shirt about five years ago TechEd Australia. It’s a business shirt (buttons, cuffs, pocket on the chest), black with the SQL Server logo on it. It was such a nice shirt that I commented about it to the Product Marketing Manager for Australia (Christine, at the time), who unexpectedly arranged for me to get another one. That was certainly an improvement on the tent I was given at one of the MVP conference I attended. So when I consider these ‘rules’, two pieces of swag come to mind, and I think both were at PASS Summits (although I can’t be sure). One was a hand-warmer from HP, one of the “crystallisation-type” ones, which proved extremely popular when I got home, until one day when it didn’t survive being recharged – not overly SQL related, but still it was good swag. The other was an umbrella, from expressor, which was from the PASS Summit in 2010, my first PASS Summit. I remember it well – Blythe Morrow (now Gietz) (@blythemorrow) was working the booth, having stopped working for PASS some time before, but she’d been on my list of people to meet, as I’d had plenty of contact with her while she’d worked at PASS, my being a chapter leader and general volunteer. There had been an expressor dinner on one of the first evenings, which I’d been asked to be at, which is when I’d met lots of SQL people in person for the first time, including Ted Krueger (@onpnt), Jessica Moss (@jessicamoss) and Blythe. Anyway, at some point the next day I swung by their booth to say hello and thank them for the dinner, and Blythe says “Oh, we have the best swag – here!” and handed me an umbrella. And she was right. It’s excellent. @rob_farley

    Read the article

  • Announcing Oracle Knowledge 8.5: Even Superheroes Need Upgrades

    - by Richard Lefebvre
    It’s no secret that we like Iron Man here at Oracle. We've certainly got stuff in common: one of the world’s largest technology companies and one of the world’s strongest technology-driven superheroes. If you've seen the recent Iron Man movies, you might have even noticed some of our servers sitting in Tony Stark’s lab. Heck, our CEO made a cameo appearance in one of the movies. Yeah, we’re fans. Especially as Iron Man is a regular guy with some amazing technology – like us. But Like all great things even Superheroes need upgrades, whether it’s their suit, their car or their spacestation. Oracle certainly has its share of advanced technology.  For example, Oracle acquired InQuira in 2011 after years of watching the company advance the science of Knowledge Management.  And it was some extremely super technology.  At that time, Forrester’s Kate Leggett wrote about it in ‘Standalone Knowledge Management Is Dead With Oracle's Announcement To Acquire InQuira’ saying ‘Knowledge, accessible via web self-service or agent UIs, is a critical customer service component for industries fielding repetitive questions about policies, procedures, products, and solutions.’  One short sentence that amounts to a very tall order.  Since the acquisition our KM scientists have been hard at work in their labs. Today Oracle announced its first major knowledge management release since its acquisition of InQuira: Oracle Knowledge 8.5. We’ve put a massively-upgraded supersuit on our KM solution because we still have bad guys to fight. And we are very proud to say that we went way beyond our original plans. So what, exactly, did we do in Oracle Knowledge 8.5? We did what any high-tech super-scientist would do. We made Oracle Knowledge smarter, stronger and faster. First, we gave Oracle Knowledge a stronger heart: Certified on Oracle technologies, including Oracle WebLogic Server, Oracle Business Intelligence, Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Huge scaling and performance improvements. Then we gave it a better reach: Improved iConnect functionality that delivers contextualized knowledge directly into CRM applications. Better content acquisition support across disparate sources. Enhanced Language Support including Natural Language search support for 16 Languages. Enhanced Keyword Search for 23 authoring languages, as well as enhanced out-of-the-box industry ontologies covering 14 languages. And finally we made Oracle Knowledge ridiculously smarter: Improved Natural Language Search and a new Contextual Answer Delivery that understands the true intent of each inquiry to deliver the best possible answers. AnswerFlow for Guided Navigation & Answer Delivery, a new application for guided troubleshooting and answer delivery. Knowledge Analytics standardized on Oracle’s Business Intelligence Enterprise Edition. Knowledge Analytics Dashboards optimized search and content creation through targeted, actionable insights. A new three-level language model "Global - Language - Locale" that provides an improved search experience for organizations with a global footprint. We believe that Oracle Knowledge 8.5 is the most sophisticated KM solution in existence today and we’ve worked very hard to help it fulfill the promise of KM: empowering customers and employees with deep insights wherever they need them. We hope you agree it’s a suit worth wearing. We are continuing to invest in Knowledge Management as it continues to be especially relevant today with the enterprise push for peer collaboration, crowd-sourced wisdom, agile innovation, social interaction channels, applied real-time analytics, and personalization. In fact, we believe that Knowledge Management is a critical part of the Customer Experience portfolio for success. From empowering employee’s, to empowering customers, to gaining the insights from interactions across all channels, businesses today cannot efficiently scale their efforts, strengthen their customer relationships or achieve their growth goals without a solid Knowledge Management foundation to build from. And like every good superhero saga, we’re not even close to being finished. Next we are taking Oracle Knowledge into the Cloud. Yes, we’re thinking what you’re thinking: ROCKET BOOTS! Stay tuned for the next adventure… By Nav Chakravarti, Vice-President, Product Management, CRM Knowledge and previously the CTO of InQuira, a knowledge management company acquired by Oracle in 2011

    Read the article

  • Announcing Oracle Knowledge 8.5: Even Superheroes Need Upgrades

    - by Chris Warner
    It’s no secret that we like Iron Man here at Oracle. We've certainly got stuff in common: one of the world’s largest technology companies and one of the world’s strongest technology-driven superheroes. If you've seen the recent Iron Man movies, you might have even noticed some of our servers sitting in Tony Stark’s lab. Heck, our CEO made a cameo appearance in one of the movies. Yeah, we’re fans. Especially as Iron Man is a regular guy with some amazing technology – like us. But Like all great things even Superheroes need upgrades, whether it’s their suit, their car or their spacestation. Oracle certainly has its share of advanced technology.  For example, Oracle acquired InQuira in 2011 after years of watching the company advance the science of Knowledge Management.  And it was some extremely super technology.  At that time, Forrester’s Kate Leggett wrote about it in ‘Standalone Knowledge Management Is Dead With Oracle's Announcement To Acquire InQuira’ saying ‘Knowledge, accessible via web self-service or agent UIs, is a critical customer service component for industries fielding repetitive questions about policies, procedures, products, and solutions.’  One short sentence that amounts to a very tall order.  Since the acquisition our KM scientists have been hard at work in their labs. Today Oracle announced its first major knowledge management release since its acquisition of InQuira: Oracle Knowledge 8.5. We’ve put a massively-upgraded supersuit on our KM solution because we still have bad guys to fight. And we are very proud to say that we went way beyond our original plans. So what, exactly, did we do in Oracle Knowledge 8.5? We did what any high-tech super-scientist would do. We made Oracle Knowledge smarter, stronger and faster. First, we gave Oracle Knowledge a stronger heart: Certified on Oracle technologies, including Oracle WebLogic Server, Oracle Business Intelligence, Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Huge scaling and performance improvements. Then we gave it a better reach: Improved iConnect functionality that delivers contextualized knowledge directly into CRM applications. Better content acquisition support across disparate sources. Enhanced Language Support including Natural Language search support for 16 Languages. Enhanced Keyword Search for 23 authoring languages, as well as enhanced out-of-the-box industry ontologies covering 14 languages. And finally we made Oracle Knowledge ridiculously smarter: Improved Natural Language Search and a new Contextual Answer Delivery that understands the true intent of each inquiry to deliver the best possible answers. AnswerFlow for Guided Navigation & Answer Delivery, a new application for guided troubleshooting and answer delivery. Knowledge Analytics standardized on Oracle’s Business Intelligence Enterprise Edition. Knowledge Analytics Dashboards optimized search and content creation through targeted, actionable insights. A new three-level language model "Global - Language - Locale" that provides an improved search experience for organizations with a global footprint. We believe that Oracle Knowledge 8.5 is the most sophisticated KM solution in existence today and we’ve worked very hard to help it fulfill the promise of KM: empowering customers and employees with deep insights wherever they need them. We hope you agree it’s a suit worth wearing. We are continuing to invest in Knowledge Management as it continues to be especially relevant today with the enterprise push for peer collaboration, crowd-sourced wisdom, agile innovation, social interaction channels, applied real-time analytics, and personalization. In fact, we believe that Knowledge Management is a critical part of the Customer Experience portfolio for success. From empowering employee’s, to empowering customers, to gaining the insights from interactions across all channels, businesses today cannot efficiently scale their efforts, strengthen their customer relationships or achieve their growth goals without a solid Knowledge Management foundation to build from. And like every good superhero saga, we’re not even close to being finished. Next we are taking Oracle Knowledge into the Cloud. Yes, we’re thinking what you’re thinking: ROCKET BOOTS! Stay tuned for the next adventure… By Nav Chakravarti, Vice-President, Product Management, CRM Knowledge and previously the CTO of InQuira, a knowledge management company acquired by Oracle in 2011. 

    Read the article

  • Dissing Architects, or "What's wrong with the coffee?"

    - by Bob Rhubart
    In my conversations with people in architect roles, tales of animosity, disrespect, and outright hostility aren't uncommon. And it's clear that in more than a few organizations architects regularly face a tough uphill climb. For architects with the requisite combination of technical, organizational, and people skills, that rough treatment is grossly undeserved. But tales of unqualified people in positions up and down the IT food chain are also easy to come by. So what's the other side of the architect story? Are some architects tarnishing the role and making life miserable for their more qualified colleagues? The various quotes included below were culled from a variety of sources. The criticism is harsh, and the people behind these quotes clearly have issues with architects. Still, whether based on mere opinion or actual experience, the comments shed some light on behaviors that should raise red flags for anyone pursuing a career as an architect. If you're an architect, and you've ever noticed that your coffee tastes like window cleaner, or your car is repeatedly keyed, or no one ever holds the elevator for you, maybe you need to do a little soul searching... Those Who Can, Code; Those Who Can't, Architect | Joe Winchester [May 18, 2007] "At the moment there seems to be an extremely unhealthy obsession in software with the concept of architecture. A colleague of mine, a recent graduate, told me he wished to become a software architect. He was drawn to the glamour of being able to come up with grandiose ideas - sweeping generalized designs, creating presentations to audiences of acronym addicts, writing esoteric academic papers, speaking at conferences attended by headless engineers on company expense accounts hungrily seeking out this year's grail, and creating e-mails with huge cc lists from people whose signature footer is more interesting than the content. I tried to re-orient him into actually doing some coding, to join a team that has a good product and keen users both of whom are pushing requirements forward, to no avail. Somehow the lure of being an architecture astronaut was too strong and I lost him to the dark side." Don't Let Architecture Astronauts Scare You | Joel Spolsky [April 21, 2001] "It's very hard to get them to write code or design programs, because they won't stop thinking about Architecture. They're astronauts because they are above the oxygen level, I don't know how they're breathing. They tend to work for really big companies that can afford to have lots of unproductive people with really advanced degrees that don't contribute to the bottom line. Remember that the architecture people are solving problems that they think they can solve, not problems which are useful to solve." Non Coding Architects Suck | Richard Henderson [May 24, 2010] "If a guy with a badge saying 'system architect' looks blank on low-level issues then he is not an architect, he is a business-analyst who went on a course. He will probably wax lyrical on all things high-level and 'important.' He will produce lovely object hierarchies without a clue to implementation. He will have a moustache and play golf." Architects Play Golf | Sunir Shah [August 15, 2012] "Often arrogant architects are difficult to get a hold of during the implementation phase because they no longer feel the need to stick around. Especially around midnight when most of the poor sob [sic] developers are still banging away. After all, they've already solved the problem--the rest is just an implementation exercise." Engineer vs Architect(Part of a discussion on the IT Architect Network Group on LinkedIn) "[An] architect spends his time producing white papers full of acronyms he does not understand but that impress his boss [while the] engineer keeps his head down and does the actual job." Architects Don't Code | [Author Unknown] "Faulty belief: System Architects don't need to code anymore. They know what they are talking about by virtue of the fact that they are System Architects."

    Read the article

  • Don't Forget To Enjoy Life

    - by Justin
    I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

    Read the article

  • SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2

    - by pinaldave
    Yesterday I wrote a real world story of how a friend who thought they have an issue with intrusion or virus whereas the issue was really in the code. I strongly suggest you read my earlier blog post Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 before continuing this blog post as this is second part of the first blog post. Let me reproduce the simple scenario in T-SQL. Building Sample Data USE [TestDB] GO -- Creating Table Products CREATE TABLE [dbo].[Products]( [ProductID] [int] NOT NULL, [ProductDesc] [varchar](50) NOT NULL, CONSTRAINT [PK_Products] PRIMARY KEY CLUSTERED ( [ProductID] ASC )) ON [PRIMARY] GO -- Creating Table ProductDetails CREATE TABLE [dbo].[ProductDetails]( [ProductDetailID] [int] NOT NULL, [ProductID] [int] NOT NULL, [Total] [int] NOT NULL, CONSTRAINT [PK_ProductDetails] PRIMARY KEY CLUSTERED ( [ProductDetailID] ASC )) ON [PRIMARY] GO ALTER TABLE [dbo].[ProductDetails] WITH CHECK ADD CONSTRAINT [FK_ProductDetails_Products] FOREIGN KEY([ProductID]) REFERENCES [dbo].[Products] ([ProductID]) ON UPDATE CASCADE ON DELETE CASCADE GO -- Insert Data into Table USE TestDB GO INSERT INTO Products (ProductID, ProductDesc) SELECT 1, 'Bike' UNION ALL SELECT 2, 'Car' UNION ALL SELECT 3, 'Books' GO INSERT INTO ProductDetails ([ProductDetailID],[ProductID],[Total]) SELECT 1, 1, 200 UNION ALL SELECT 2, 1, 100 UNION ALL SELECT 3, 1, 111 UNION ALL SELECT 4, 2, 200 UNION ALL SELECT 5, 3, 100 UNION ALL SELECT 6, 3, 100 UNION ALL SELECT 7, 3, 200 GO Select Data from Tables -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Delete Data from Products Table -- Deleting Data DELETE FROM Products WHERE ProductID = 1 GO Select Data from Tables Again -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Clean up Data -- Clean up DROP TABLE ProductDetails DROP TABLE Products GO My friend was confused as there was no delete was firing over ProductsDetails Table still there was a delete happening. The reason was because there is a foreign key created between Products and ProductsDetails Table with the keywords ON DELETE CASCADE. Due to ON DELETE CASCADE whenever is specified when the data from Table A is deleted and if it is referenced in another table using foreign key it will be deleted as well. Workaround 1: Design Changes – 3 Tables Change the design to have more than two tables. Create One Product Mater Table with all the products. It should historically store all the products list in it. No products should be ever removed from it. Add another table called Current Product and it should contain only the table which should be visible in the product catalogue. Another table should be called as ProductHistory table. There should be no use of CASCADE keyword among them. Workaround 2: Design Changes - Column IsVisible You can keep the same two tables. 1) Products and 2) ProductsDetails. Add a column with BIT datatype to it and name it as a IsVisible. Now change your application code to display the catalogue based on this column. There should be no need to delete anything. Workaround 3: Bad Advices (Bad advises begins here) The reason I have said bad advices because these are going to be bad advices for sure. You should make necessary design changes and not use poor workarounds which can damage the system and database integrity further. Here are the examples 1) Do not delete the data – well, this is not a real solution but can give time to implement design changes. 2) Do not have ON CASCADE DELETE – in this case, you will have entry in productsdetails which will have no corresponding product id and later on there will be lots of confusion. 3) Duplicate Data – you can have all the data of the product table move to the product details table and repeat them at each row. Now remove CASCADE code. This will let you delete the product table rows without any issue. There are so many things wrong this suggestion, that I will not even start here. (Bad advises ends here)  Well, did I miss anything? Please help me with your suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • D&rsquo;Arcy&rsquo;s Book Club - The New Strategic Selling

    - by D'Arcy Lussier
    The New Strategic Selling Miller and Heiman Amazon.ca Amazon.com Chapters Everybody is a salesmen. Every day, without knowing it, we sell something to someone. Now, the typical vision people think of when they hear the word “sales” is the sleazy used car salesperson who does whatever they can to get you to buy the clunker on their lot. But selling is not an action tied to money and products. Selling is about convincing people to see your point of view and act on it. If you want your company to cover a trip to a conference, you may have to sell the idea to your boss. If you want to buy that new big screen TV, you have to sell the idea to your significant other. If you want to go on a weekend fishing trip with the boys you might be called in to help sell the idea to your buddies wife. We all sell, but we don’t all sell very well. So enter The New Strategic Selling, a book based on the sales course put on by the Miller-Heiman group. In fact, this isn’t really a “New” strategy to selling as its been around for a number of years. But the concepts they present, the ideas about selling, these are still very radical based on what most of us have experienced. Gone are the high pressure, win at all cost, GlenGarry-GlenRoss style of sales…instead the book presents a framework to switch to need-based selling. It’s the idea that instead of going in raving about a product or service, you build a relationship where the buyer expresses what their needs are and your response is to present a solution that best fits that need. Instead of focussing on the amount of money you can squeeze out of a client, you focus on whether everyone wins, that they receive win-results from the engagement, that repeat business is developed over time delivering value over and over again. The great thing about the book is that what it teaches…things like how to identify different buying influencers, how to prepare for meetings, techniques to solicit information about what the buyer is really thinking/feeling…these things are entirely applicable in *any* situation that you need to sell to someone…and remember: selling is convincing people to see your point of view and act on it. So that new big screen TV you want to buy but need to convince your wife on? This book can help you. That training opportunity you want your company to send you on? This book can help you. The upgrade to your community park that you want to lobby the local civic authorities for? This book can help you. The book is a bit wordy. I found that the length could have been reduced and the points still have gotten across. That’s really the only knock that I have though; the insight that it provides is so worthwhile that having to chew through extra words is well worth it. You definitely don’t have to be a professional salesperson to benefit from this book. Rating: 4/5

    Read the article

  • Auto-organized / smart inventory system?

    - by VeXe
    for the past week I've been working on an inventory system with Unity3D. At first I got help from the guys at Design3 but it wasn't too long till we split path, because I really didn't like the way they did their code, it didn't have any smell of OOP whatsoever. I took it further steps ahead - items take more than one slot, advanced placement system (items tries their best to find the best close fit), local mouse system (mouse gets trapped in active bag area), etc. Here's a demo of my work. What we would like to have in our game, is an auto-organizing feature - not auto-sort. We want this feature because our inventory's going to be in 'real-time' - not like in Resident Evil 1,2,3 etc where you would pause the game and do things in your inventory. Now imagine your self in a sticky situation surrounded by zombies, and you don't have bullets, you look around, you see that there are bullets nearby on the ground, so you go for them and try to pick them up, but they don't fit! you look at your inventory and find out that if you reorganize some of the items, it will fit! - now the player - in that situation doesn't have time to reorganize because he's surrounded with zombies and will die if he stops and organizes the inventory to make space (remember inventory in real-time, no pausing) - wouldn't it be nice for that to happen automatically? - Yes! (I believe this has been implemented in some games like Dungeon siege or something, so sure it's doable) take a look at this picture for example: Yes, so if you auto-sort the issue you will get your spaces but it's bad because: 1- Expensive: it doesn't need a whole sort operation to free those spaces, in the first picture, just slide the red item at the bottom to the very left, and you get the same spaces that you got from the auto-sort. 2- It's annoying to the player: "Who the F told you to re-order my stuff?" I'm not asking for "How to write the code" for this, I'm just asking for some guidance, where to look, what algorithms are involved? Is this something related to graphs and shortest path stuff? I hope not cuz I didn't manage to continue my college studies :/ But even if it is, just tell me and I will learn the stuff related. Notice there could be more than just one solution. So I guess the first thing I have to do is figure out if the situation is 'solvable' - if I know how to determine if a situation is solvable or not, then I can 'solve' it. I just need to know the conditions that makes it 'solvable'. And I believe there must be some algorithm/data structure for this. Here's a pic for more than one solution of trying to fit a 1x3 item: The arrows show just one of the solutions, but if you look you will find more than one. This is what I ultimately not auto-sorting but find a solution and applying it. Note that if I spend time on it I will come up with a way to solve it, but it wouldn't be the best way, it's like, holding a car wheel with your feet instead of your hands! XD Or just like trying to solve an issue that requires arrays, but you're not yet aware of their existence! So what is the right approach to this? Hope somebody helps, thanks a lot in advance :)

    Read the article

  • In Reporting Services how to filter drop down parameter list in based on other selected parameter?

    - by Lee Englestone
    Question In a Reporting Services Report, How do I filter a second drop down list of cars to only show cars whose ManufacturerId is equal the selected Manufacturer (from the first drop down list)? Report Datasets I have 2 datasets. Dataset 1. A list of Manufacturers. From a stored procedure Report_Manufacturers_P Dataset 2. A list of Cars, including a column called Manufacturers id. From a stored procedure Report_Cars_P Report Parameters On the Report I have 2 Parameters. Parameter 1. ManufacturerId. Set from A drop down list of Manufacturers (DataSet 1). Parameter 2. CarId. Set from A drop down list of Cars (DataSet 2). I've tried.. Creating another sproc called Report_Manufacturer_Cars_P that takes the ManufacturerId as an integer and returns a list of cars made by that manufacturer. Any Ideas. As selecting a Manufacturer doesn't seem to want to kick off anything that filters the Car list? Thanks in advance, -- Lee

    Read the article

  • What are some strategies for maintaining a common database schema with a team of developers and no D

    - by Mahmoud Abdelkader
    I'm curious about how others have approached the problem of maintaining and synchronizing database changes across many (10+) developers without a DBA? What I mean, basically, is that if someone wants to make a change to the database, what are some strategies to doing that? (i.e. I've created a 'Car' model and now I want to apply the appropriate DDL to the database, etc..) We're primarily a Python shop and our ORM is SQLAlchemy. Previously, we had written our models in such a way to create the models using our ORM, but we recently ditched this because: We couldn't track changes using the ORM The state of the ORM wasn't in sync with the database (e.g. lots of differences primarily related to indexes and unique constraints) There was no way to audit database changes unless the developer documented the database change via email to the team. Our solution to this problem was to basically have a "gatekeeper" individual who checks every change into the database and applies all accepted database changes to an accepted_db_changes.sql file, whereby the developers who need to make any database changes put their requests into a proposed_db_changes.sql file. We check this file in, and, when it's updated, we all apply the change to our personal database on our development machine. We don't create indexes or constraints on the models, they are applied explicitly on the database. I would like to know what are some strategies to maintain database schemas and if ours is seems reasonable. Thanks!

    Read the article

  • How to fix RapidXML String ownership concerns?

    - by Roddy
    RapidXML is a fast, lightweight C++ XML DOM Parser, but it has some quirks. The worst of these to my mind is this: 3.2 Ownership Of Strings. Nodes and attributes produced by RapidXml do not own their name and value strings. They merely hold the pointers to them. This means you have to be careful when setting these values manually, by using xml_base::name(const Ch *) or xml_base::value(const Ch *) functions. Care must be taken to ensure that lifetime of the string passed is at least as long as lifetime of the node/attribute. The easiest way to achieve it is to allocate the string from memory_pool owned by the document. Use memory_pool::allocate_string() function for this purpose. Now, I understand it's done this way for speed, but this feels like an car crash waiting to happen. The following code looks innocuous but 'name' and 'value' are out of scope when foo returns, so the doc is undefined. void foo() { char name[]="Name"; char value[]="Value"; doc.append_node(doc.allocate_node(node_element, name, value)); } The suggestion of using allocate_string() as per manual works, but it's so easy to forget. Has anyone 'enhanced' RapidXML to avoid this issue?

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41  | Next Page >