Search Results

Search found 1808 results on 73 pages for 'hot spare'.

Page 35/73 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Is Windows Server 2003 on 96 MB possible?

  - by Nifle

  I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

  Read the article

• I've inherited 200K lines of spaghetti code -- what now?

  - by kmote

  I hope this isn't too general of a question; I could really use some seasoned advice. I am newly employed as the sole "SW Engineer" in a fairly small shop of scientists who have spent the last 10-20 years cobbling together a vast code base. (It was written in a virtually obsolete language: G2 -- think Pascal with graphics). The program itself is a physical model of a complex chemical processing plant; the team that wrote it have incredibly deep domain knowledge but little or no formal training in programming fundamentals. They've recently learned some hard lessons about the consequences of non-existant configuration management. Their maintenance efforts are also greatly hampered by the vast accumulation of undocumented "sludge" in the code itself. I will spare you the "politics" of the situation (there's always politics!), but suffice to say, there is not a consensus of opinion about what is needed for the path ahead. They have asked me to begin presenting to the team some of the principles of modern software development. They want me to introduce some of the industry-standard practices and strategies regarding coding conventions, lifecycle management, high-level design patterns, and source control. Frankly, it's a fairly daunting task and I'm not sure where to begin. Initially, I'm inclined to tutor them in some of the central concepts of The Pragmatic Programmer, or Fowler's Refactoring ("Code Smells", etc). I also hope to introduce a number of Agile methodologies. But ultimately, to be effective, I think I'm going to need to hone in on 5-7 core fundamentals; in other words, what are the most important principles or practices that they can realistically start implementing that will give them the most "bang for the buck". So that's my question: What would you include in your list of the most effective strategies to help straighten out the spaghetti (and prevent it in the future)?

  Read the article

• Alternatives to Crashplan for VPS?

  - by Chloe

  I use SFTP Net Drive to mount a remote VPS so I can back it up. However, it's taken over 3+ days to scan! I ran 'ls -lR' from my desktop over the mounted network drive and it only took about 5m to list all the files! There are only about 5000 files and 2 GB. I know Crashplan can run headless on the VPS itself, but that sounds like a pain to set up, and it takes so much memory on the server. The VPS doesn't have a lot of memory to spare - it's less than my desktop. Is there another program that can communicate with a Crashplan backup protocol and has a command line interface? backup /home

  Read the article

• What is a safe way to dispose of personal info on an old laptop and what to do with said laptop?

  - by MikeN

  I have an old laptop someone gave me that only has 64Megs of RAM on it and runs WIN XP. I wanted to wipe the drive clean by installing Ubuntu Desktop to remove any shred of personal information on it and to make it useful to someone else. But the Ubuntu installer keeps failing because there is not enough RAM. Is there another version of Linux that would easily install on a 64 Megs of RAM system? 2nd part of question, what do I do with this old laptop? It doesn't have a battery anymore and has to be plugged into the wall to run. Assuming I can install a good Linux distro on it, who do I give it to? Salvation Army? I'm looking to just have it be useful to someone or some organization for spare parts or some basic computer usage.

  Read the article

• Where have I been for the last month?

  - by MarkPearl

  So, I have been pretty quiet for the last month or so. True, it has been holiday time and I went to Cape Town for a stunning week of sunshine and blue skies, but the second I got back home I spent the remainder of my holiday on my pc viewing tutorials on www.tekpub.com Craig Shoemaker, who I got in contact with because of his podcast, sent me a 1 month free subscription to the site and it has been really appreciated. I have done a lot of WPF programming in the past, but not any asp.net stuff and so I used the time to get a peek at asp.net mvc2 as well as a bunch of other technologies. I just wished I had more spare time to do the rest of the videos. While I didn’t understand all of what was being shown on the asp.net stuff (it required previous asp.net expertise), the site was a really good jump start to someone wanting to learn a new technology and broaden the horizons and I would highly recommend it, My only gripe is that in South Africa we have limited bandwidth and bandwidth speeds and so I spent a lot of my monthly bandwidth on the site and had to top up with my ISP several times because of the high quality video captures that the site did. I would have preferred to download the video’s, but apparently that is only available to people who have the yearly subscription fee. Other than that, great site and thanks a ton Craig!

  Read the article

• Can I use the Airport Express as a an uplink between two networks?

  - by Ant Swift

  I have two separate networks using different IP ranges, 192.168.0.* for the wired only, isolated network and 192.160.1.* for the wireless only network which is connected to the internet. The wired network has a network printer setup and working and I want to be able to share it out to members of the wireless network (see diagram below). In short I need some kind of uplink between the two networks. Currently running a cable is out since there is no suitable route. I have a spare Airport Express and I am wondering if I could attach it to the wired network and have it join the wireless and act as the uplink between the two. Anyone know if the device is capable of this?

  Read the article

• Is it possible to use multi keyboards with multi keyboard layouts simultaneously?

  - by mono

  Considering to switch to dvorak layout, but this terminal is used by multi users as the same user account. It is unacceptable to ask all people to switch layout, plus it is hard to use dvorak layout with a keyboard qwerty-ly labeled. But there are spare (USB,qwerty) keyboards, so if I plug another keyboard in and be able to use multi layouts on different psyical keyboard simultaneously (I will rearrange letters on keys), the problem get solved. solution for either windows or linux is fine. anyway thanks all.

  Read the article

• Clone a Red Hat RAID as part of a disaster recovery plan

  - by Campo

  I am looking for recommendations to clone a Red Hat mirrored raid to a single hard drive located in the same machine. The idea is if the servers hardware ever has an issue we have a similar hardware machine ready to go. All we would have to do is pop in the cloned drive. If the servers RAID ever failed we could just switch to the single drive to maintain uptime and restore the original configuration on the spare server with a backup. This is a restaurant and they are open 7 days a week. We do have time from 12:am to 9:00am to perform the necessary steps for a clone and we talking about under 10 Gigs of information. There is a database on the server. I have looked into Rsync and Clonezilla. But I am just not confident either is capable of completing the task I want. Looking for some suggestions and possibly a step by step if you could be so kind.

  Read the article

• How to route traffic through a VPN tunnel?

  - by Gabriel

  The problem with our server is that we need to use the bug ridden and awful AT&T network client, which causes our server to bluescreen once per 24 hours. Does any one know how to (or has a good guide) quickly set up a workstation running Windows server 2008 R2 as a proxy server. So this spare workstation would run AT&T and would act as a bridge between our server and the server that can be connected to only via the AT&T VPN software. And this way our own production server would not crash so often (or not at all) and the workstation can happily crash whenever it wants to.

  Read the article

• How do I make a backup of a live server?

  - by Jurily

  At my new job, I have a production server with the following qualities: Windows (XP I think), ancient hardware Absolutely vital database No backups whatsoever Everyone in the company has full admin rights, the passwords are stored in a .txt on the global share No installers, except for the OS The machine itself is sitting on a wooden shelf 5 feet above the ground against an external wall with frequent truck traffic on the other side; the shelf is already bent from the constant load Hasn't been rebooted in $DEITY knows how long, my predecessor wasn't even sure if it would survive it UPS is installed, but since everything is hooked up to it, it would last 10 minutes tops No spare parts or hardware budget How do I make a full backup with minimal impact on the server? I'm not sure how close it is to a total meltdown. For all I know, plugging in a USB stick could kill the company, and of course it will be all my fault, since "it was running fine before you touched it". The ideal solution would be a VM, so I have a test environment as well (separate of course).

  Read the article

• Developing my momentum on open source projects

  - by sashang

  Hi I've been struggling to develop momentum contributing to open source projects. I have in the past tried with gcc and contributed a fix to libstdc++ but it was a once off and even though I spent months in my spare time on the dev mailing list and reading through things I just never seemed to develop any momentum with the code. Eventually I unsubscribed and got my free time back and uncluttered my mailbox. Like a lot of people I have some little open source defunct projects lying around on the net, but they're not large and I'm the only contributor. At the moment I'm more interested in contributing to a large open source project and want to know how people got started because I find it difficult while working full time to develop any momentum with the code base. Other more regular contributors, who are on the project full-time, are able to make changes at will and as result enter that positive feedback cycle where they understand the code and also know where it's heading. It makes the barrier to entry higher for those that come along later. My questions are to people who actively contribute to large opensource projects, like the Linux kernel, or gcc or clang/llvm or anything else with say a developer head count of more than 10. How did you get started? Was there a large chunk of time in your life that you just could dedicate to working on the project? I know in Linus's case he had a chunk of time (6 months) to get it started. What barriers to entry did you encounter? Can you describe the initial stages of the time spent with the project, from when you had little understanding of the code to when you understood enough to commit regularly. Thanks

  Read the article

• Hosting files with support for file tagging / keywords

  - by Zev Chonoles

  I have a large (approx. 25GB) collection of files I would like to host online for people to view or download. I have a spare computer I can use as a dedicated server for these files. I'm looking for a method of, or piece of software for, hosting my files where I can assign tags or keywords to the files, and people viewing my files online can search the collection via the tags. By way of approximate solutions I've found so far, I see that there is software such as Collectorz.com or Readerware for creating databases of one's books / music / movies, and these databases can be searched by tags or keywords, and the databases can be made available and searchable online; this would suit my purposes except that my files are not necessarily books, music, or movies, and I want the files themselves accessible online, not a database describing my files. A commercially-available solution like the ones above would be acceptable, but I'd prefer to have the whole setup under my control (i.e. I'd like to either implement it by hand, or use commercial software that doesn't rely on using the company's servers, paying them a continued fee, etc.). The current extent of my internet experience is designing a few Google Sites, so I know there's a fair chance I won't understand the answers I receive, but I'm always happy to have a summer project :)

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Choosing a Linux distribution

  - by Luke Puplett

  Dangerous territory with this question so please try to be impartial and instead focus on what to look for when choosing a Linux distribution. I'm completely new to Linux. I thought it'd never happen but I need to have a Linux box to play with and I have a spare fanless Atom PC (32-bit only). I'll be using the machine as a non-commercial hobby server, the trouble is, I don't even know how to compare Linux distributions and why people pick one over another. If anything, I want to have an easy install from USB stick. My question is: what do you look for when choosing a (free?) Linux distribution for a server? If you can, please explain what sorts of things actually differ between one and another without saying which you think is better, just the facts. The way I see it, Linux as a server is just an SSH console and I find it hard to imagine what could be different between one and another.

  Read the article

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• Compaq Presario Laptop Monitor Problems

  - by Nishant

  I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

  Read the article

• An entry-level programmer's best option [on hold]

  - by user134409

  I am facing a puzzle and I am not sure the best way to make a decision. In my spare time besides playing video games I got around to develop some games, nothing fancy, just small projects to get a better grasp at programming. After I finished college and got my BA in Computer Science, I got a job as web developer at a small firm. The next few months were very stressful as I had no previous experience and tried my best to make up for it. But after 6 months my boss told me I was inefficient and not very independent and let me go. To my credit, the help from the senior was very limited, I did learn a lot but I have learned by myself. For example they told me to do a UI in BackboneJS and I took me a while but I got it working (even if it was poorly designed). But I managed to do it all by myself because my senior was very busy and he did not have time even for my questions. Now I have found a new job again in web development but I am very afraid of what is going to happen next. I am afraid because I don't want to take the job and then be fired again after a couple of months, I get the feeling that this will be very bad on my CV, job hopping is like a red flag. They want to hire me but I am aware that they are working with new technologies and maybe I will end up not coping with it. So the question is: Should a entry-level programmer be better off with a starting job in QA, testing and work his way from there? I did learn allot from my first job but it was a moral blow when they decided to fire me. I do have a low self-esteem and I know my skills as a programmer are not that great. But I like programming and want to get better and I want to have a long career in it so that basically my pickle. Thank you in advance for the answers.

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• Database for heat tolerances of various cables?

  - by I. F.

  Is there any kind of unified database of heat tolerances for networking cables? I've been setting up a number of home/small office networks lately and as a mostly-amateur I could really use some information on what is safe to run behind a radiator, next to a steam pipe, etc. The question I'm up against at the moment is: Can I run normal RJ11 phone line cable (from DSL modem to phone jack) behind a steam radiator without risking a fire? Unlike cat5, I could not find published standards for these, so I'm turning to experts with more experience. This is a cut-rate show. Do I go out and buy more cabling, and if so which, or use the spare that I have?

  Read the article

• I've got my Master's in Software Engineering... Now what? [closed]

  - by Brian Driscoll

  Recently I completed a Master of Science in Software Engineering from Drexel University (Philadelphia, PA, US), because I wanted to have some formal education in software (my undergrad is in Math Ed) and also because I wanted to be able to advance my career beyond just programming. Don't get me wrong; I love to code. I spend a lot of my spare time coding. However, for me writing code is just a means to an end: what I REALLY love is designing software. Not visual design, mind you, but the architecture of the system. So, ideally I'd like to try to get a job doing software architecture. The problem is that I have no real experience in it besides my graduate course work. So, what should I do to make my "bones" in software architecture? UPDATE Just so it's clear, I have over 5 years of work experience in software development and an MCTS cert in addition to my education, so I'm not looking for the usual "I'm fresh out of school, what should I do?" advice.

  Read the article

• Internet printing : print to iOS gateway -> AirPrint / something -> Laser printers

  - by user75129

  I've done a bit of research on the Internet, and it looks like I'm on a dead end. My goal is to minimize cost, and be able to send and print documents AUTOMATICALLY (may be 10 or 20 pages per day) to a laser printer in a remote office. The preliminary method is to use: iOS 5.1.1 (JB'ed) with 3G connection, HP (or other brands) printer with AirPrint, iCloud's Documents and may be write some launchd scripts to monitor any new documents in iCloud. May be with other software. I am not sure yet. By using the cloud, I can upload new docs to the cloud anywhere in my city, and the iOS will be able to see them within a reasonable amount of time, then print it. But it seems this combo is not workable. Anyone got any advice on how to make this set up work, or propose other alternatives that requires NO PC or Mac? Currently I have a 3GS with 3G connectivity spare. Need to buy a new printer though.

  Read the article

• Simple local smtp server - minimal setup ubuntu

  - by malatio

  What is the absolute, bare minimum, no-hassle, hopefully idiot-proof way of setting up a local smtp server? If you're going to say postfix, what are these alledgedly bare minimum, idiot proof steps to setting it up? I'm sort of amazed at how difficult it seems to find this anywhere. I need: a locally hosted smtp server that sends mail to the internet. no tls or saslauth or whatever. only allows mail to come from localhost. no relays. It seems like there should be some software package somewhere where you install, set up an account and then you have a local smtp server. I'm not a sysadmin. People say postfix is dead simple but maybe I'm doing it wrong, all the setup docs I see are quite complicated, I actually don't have a spare hour to spend debugging a mailserver. I just want to send mail to the internet. Is it really that hard?

  Read the article

• HP p410i array controller - what happens if i add memory?

  - by James

  I have a p410i array controller that only has 256ram. We want to create a raid 5 so we have procured a 512 write back cache module. If we install the write back cache, will this erase the existing raid information. The server currently has 2 disks in raid 1. 6 are spare waiting for an upgrade to create a raid 5. the concern is if we replace/upgrade the memory for the controller, we will wipe the existing production raid 1 array. Thanks in advance.

  Read the article

• Running RAID on an internal storage drive

  - by Johnny W

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >