Search Results

Search found 1808 results on 73 pages for 'hot spare'.

Page 38/73 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Shrink Partition on Production Server

  - by Campo

  SO our production server was only setup with one large partition. I have setup a standby server and properly partitioned it. Now the boss wants the production environment's partition shrunk. It is an HP DL380 G5 We have 4 hot swap drives in a raid 5. How best should I go about doing this. Seems like a bad idea to me. Should I use windows or HP to do the partitioning? What should I be aware of in a production environment? The idea is to put the site (Inetpub) on a separate partition instead of the C: drive. How much downtime should I expect? Is this a terrible idea? Anything else I have missed?

  Read the article

• New Seagate GoFlex external hard drive reporting temperature 50C and higher--defective or normal?

  - by rob

  I have a brand-new Seagate GoFlex hard drive, and my SMART diagnostics program (CrystalDiskInfo) is warnings me that the drive is running too hot. The lowest reported temperature I've seen it is 48C, and the highest so far is 56C (all of last week, it was at 50C). According to several sources I've found online, including a Google study, hard disks operating higher than 40C have shorter lifespans. The temperature in the room is usually about 23C (74F), and orienting the drive vertically vs. horizontally doesn't seem to affect the operating temperature. Does anyone else have a GoFlex external desktop drive that runs at 40C or cooler? Is my drive just defective, or is this high temperature common for these drives?

  Read the article

• Yum install problem on netsolvps server

  - by Thomas

  I tried to install yum based on http://www.wallpaperama.com/forums/how-to-install-yum-problems-installing-on-linux-redhat-fedora-commands-t471.html. my current python is 2.4.6, red hot fedora core 6, 4.1.1-28, RPM 4.4.2. I tried with the yum 3.0.1 version for my current server configuration. There is no configure file on 3.0.1 so i used make install command. All files complied without error. If I run #rpm -q yum it says "package yum is not installed". Whats the problem here on the yum installation?

  Read the article

• Data Recovery needed with a Sector Zero problem on a HDD

  - by Jay Robins

  Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now...no problems (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• Best SQL Server Configuration with this hardware.

  - by DavidStein

  I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

  Read the article

• Supermicro SmartOS setup issue with HDDs

  - by Andrew B.

  I'm trying to setup SmartOS on my new Supermicro server (SYS-6027R-N3RF4+). I have 8 HDDs + 2 SSDs installed in the hot-swappable drive bays. I have not configured the Intel RAID controller on the machine (it shows no RAID configured, and lists all 8 HDDs). When I boot SmartOS from my USB key for the first time and get to the initial zpool creation I only see 2 disks listed. How can I tell which two drives are being referenced? How can I get SmartOS to recognize all 8+2 drives? Is there a BIOS setting I need to adjust?

  Read the article

• How can I lock my Mac when I walk away?

  - by schnapple

  This has got to be an easy, trivial question but as a new Mac user, how can I lock my Mac when I walk away? On Windows this is dead simple - Win+L. Or hit Ctrl-Alt-Del and select "Lock this Computer" The best thing I've found for the Mac is to rig the screensaver to require password on wake, set a hot corner to fire off the screen saver, and do that as I leave. Which feels really "Windows 3.1" to me. Is there a Win+L-style method to quickly lock my Mac when I walk away?

  Read the article

• Issue with percona-xtrabackup-2.0.0 hotbackup on MyIsam tables

  - by arn

  I am trying to implement hot backup for MyIsam tables with "percona-xtrabackup-2.0.0" and getting the following error? As the all tables are MyIsam I doubt am I using the correct package ? Backup : ./innobackupex --user="root" --password=<pass> --defaults-file="<path>/my.cnf" --ibbackup="<path>/percona-xtrabackup-2.0.0/bin/xtrabackup" <path>/backup/ innobackupex: fatal error: no 'mysqld' group in MySQL options innobackupex: fatal error: OR no 'datadir' option in group 'mysqld' in MySQL options apply-log : ./innobackupex-1.5.1 --apply-log --defaults-file=<path>/backup/2012-06-02_09-59-30/backup-my.cnf --ibbackup=<path>/percona-xtrabackup-2.0.0/bin/xtrabackup <path>/backup/2012-06-02_09-59-30/

  Read the article

• 'Game Show' presentation

  - by albatross

  I work at a state university, and every day of summer orientation we have a little jeopardy-like game that new students' parents play. We run it in an auditorium. Right now the game is a powerpoint presentation (set up similar to jeopardy) off an old laptop running Powerpoint 2003. What I want to do is to purchase & use a smaller tablet/mini-book with a touchscreen. The touchscreen would be much more professional than dragging a mouse around the screen to select category questions. I also want to use hot keys during the presentation for sound effects (for correct + incorrect answers), and I want to play music and show an automated slideshow (photos from the day). This device would need vga or hdmi and audio out. I've been looking at iPads and iPad alternatives, but figured someone out there might have a better idea or done this before.

  Read the article

• taskbar-free window manager

  - by 7vies

  I'm looking for a window manager that is not based on the "standard" taskbar (which I find a poor idea and I'm completely tired of). I'm aware of tiling window managers and improvements in last versions of operating systems, but I can't find what I need. I suppose that any window takes the whole screen (or can be tiled), and I imagine switching between windows like that: on a hotkey or mouse hot zone the screen becomes a task switcher where tasks are organized in a somewhat convenient manner. Well, it's a bit like a taskbar with autohide, but I think there could be some more convenient ideas than simply stacking icons and descriptions... It is also supposed to be lightweight enough, for example to run on a netbook. Any suggestions?

  Read the article

• Brand new Lenovo u410 heats up around touchpad

  - by Ali

  My Lenovo u410 started heating around the right palm rest minutes after I unpacked it! I am devastated, because I bought this for programming, and it's impossible to type on this for extended periods with the surface getting so hot. I haven't run any serious programs on it yet, so the processor has been pretty much idle. I've been Googling this problem, and found only one person who had this issue too. Is this is a defect in the product? Why aren't many others getting this problem? I bought it via newegg.com and as per their policy you can't return a product once you've opened it. Specs: Core i5, 6 GB RAM, 750 GB harddisk. Running Windows 8.

  Read the article

• Adding extra fan on my setup. please advice on proper Exhaust or Intake of Fan.

  - by Pennf0lio

  Hi, I modify my Computer case so that I can add more computer fan to make my computer cool this summer. I would need your thoughts how I can improve my idea and I'm open to all of your advices. Status: Fan Position (The blue circles are the fan's location) At the side I have to intake blowing fresh air at the motherboard and at the top and back I have Exhaust fan blowing out hot air. The computer fans will be powered by 12v adapter (recycled) so that my power supply wouldn't be overloaded. I need a practical advice, I don't want to spend to much on this. Thanks.

  Read the article

• Asus z53 laptop overheating problem

  - by Tiberiu Hajas

  hi all, wondering if anyone encountered overheating of asus laptop ? especially the z53 model ? usually the right side of the laptop and vent in the upper corner is blowing hot air when under even minimal load, the CPU temperature can easily get to 65-70C and GPU is even above 80C. I'm using NHC (notebook health control) to set to a higher conservatory power consumption but that helps only a bit, anyone opened up the case ? wondering is require a dust clean ...etc ? I still have some warranty on it. thanks

  Read the article

• How to control fan speed on Compaq Presario under Ubuntu?

  - by Josh

  I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensores-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)

  Read the article

• Open Windows Server 2012/Windows 8 Start Menu

  - by bmccleary

  I realize that Windows Server 2012 (and Windows 8) removed the start menu button and replaced it with moving your mouse to the upper right corner of the screen. This works fine when the desktop is full screen. However, I access all my servers through windowed RDP connections (or through the Hyper-V console window) and in this case, the desktop is not full screen. Therefore, in order to open the new "start" menu, I have to slowly move my mouse very carefully within the window to just a few pixels within top right corner of the window in order to open the menu. Also, because the session is windowed, the default hot keys (Windows + D, etc.) won't work. There has got to be an easier way. Has anyone else experienced this frustration?

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• This is probably a horrible idea; putting a Mac Mini in a mini-fridge [closed]

  - by Christian A. Strømmen

  Possible Duplicate: Putting servers inside a refrigerator? Just moved to a new house and had to place my Mac Mini server in the attic. Now this is really nice and cool at this time of the year, but during summer it's going to get blistering hot up there, meaning I have to find a solution that won't kill my Mac Mini and the two WD external drives I have connected to it. Is there any good reason why I couldn't just buy a mini-fridge and put them inside that? The only thing I can think of is condensation building up, but I have no idea if that will be an issue or not. Something like this. And yes, I'm pretty sure this is a terrible idea, but I figured it was worth mentioning here and getting some feedback. What other options are there?

  Read the article

• Impossible to stop raid device

  - by Traroth

  I'm trying to stop a RAID disk in order to replace it by a new one, as this one is not working properly. I'm typing mdadm --stop /dev/md1, and I'm getting an error message: mdadm: fail to stop array /dev/md1: Device or resource busy I'm getting this message even if I reboot the server, and I can't see a process that could cause this. The server is working under a Debian with a 2.6.18-4-amd64 kernel. Could you help? Edit: Mote details about what my colleague tried out. After unmounting sda1, the command mdadm --remove /dev/md0 /dev/sda1 worked. But now, we still have an error message after mdadm --remove /dev/md1 /dev/sda5: mdadm: hot remove failed for /dev/sda5: Device or resource busy I still don't understand completly how the different partitions are mounted, so I suppose there is something I don't understand in the currenct situation...

  Read the article

• Why does my computer show a black screen when booting into Windows Vista?

  - by dassouki

  Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

  Read the article

• Can you plug-in the battery while laptop is on AC only?

  - by Ivan Petrushev

  Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

  Read the article

• A button to set all processes to on-hold for Linux?

  - by fuenfundachtzig

  When Linux starts swapping you're basically doomed. Very soon the system won't react to any input any more, but happily swap on until the end of days... Can you think of a command that holds all processes whatsoever, thus (and while) allowing you to open a clean shell where you can examine the source of the problem and kill the process which ate up all the memory? (I guess this won't be easy, because as the memory is probably completely filled up you'd need to swap out some more memory to gather space for opening a shell, on the other hand all other swapping processes must be stopped.) If you tied such a command to a hot key then maybe you can use this as an emergency button saving you a lot a time. Any ideas if this is possible at all? Has somebody tried something like this before? If one could realize this it would be a cool feature :)

  Read the article

• Update a war on Tomcat start up

  - by pater

  I want to setup an update process for an application running on Tomcat. The server which hosts tomcat is only open during working hours (it is an intraner application for a small company). I was thinking that I could upload the new war to the server and set up "something" to run on the next server boot. This something could be a bat file that will be executed on server start up but before the start up of the Tomcat service and it will delete the old war and its exploded folder. When I update manually the war I also delete the work folder of Tomcat (just to be sure). I know about hot deployment but I do not consider it an option since I am not very sure for the implications it might have on the users current working sessions. Is there a way to run such a bat file before Tomcat start up or an alternative way to do this update? Tomcat version isn't an issue. Now is running Tomcat 6 but I can upgrade to version 7 if needed.

  Read the article

• Monitoring server room temperature

  - by user640

  I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

  Read the article

• VMWare and ALT GR key results in missing characters

  - by donat

  For some odd reason WMware products hijack the AltGy-key despite I make sure that other keys are used as hot keys to release mouse and keyboard from the virtual machine. While this is not a problem for US keyboards, european however who extensively use AltGR for characters such as pipe (|), at-sign (@), left brace ({) and right brace (}). This seem to happen both in Windows and Linux and I can not seem to find a solution that works for both. :( Anyone have an idea how to fix this without the need to modify the guest OS every time? Thank you.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >