Search Results

Search found 1808 results on 73 pages for 'hot spare'.

Page 37/73 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Install server 2012 on HP ML110 G7 with B110i controller, no disks found

  - by Molotch

  I'm trying to install Server 2012 on a HP ML110 G7 with a B110i controller and four non hot-swappable SATA drives. I just can't get the Server 2012 boot disk PE environment to find any disks. I have downloaded the latest SPP (Service Pack for Proliant 2012.10) and flashed the BIOS. I have tried two different HP drivers for B110i and Windows X64, 6.18.0.64 and 6.18.2.64 to no avail. I have tried setting the controller to both AHCI and legacy mode in the BIOS, no difference. HP:s SmartStart disc for G7 servers only support installation of up to Windows Server 2008R2. HP:s installation instructions for Server 2012 Essentials says boot from the windows disk and use the storage drivers found on the SPP (I can't find any storage drivers on the SPP disk).

  Read the article

• VDR - Trouble writing to destination volume, error -1020 (sharing violation)

  - by woodwarp

  Using VMware Data Recovery 1.1, backing up to CIFS share and getting this error 1/18/2010 8:55:31 AM: Performing incremental back up of disk "Lun VM/VM-DB1-flat.vmdk" using "SCSI Hot-Add" 1/18/2010 8:55:32 AM: Trouble writing to destination volume, error -1020 ( sharing violation) Integrity checks of the destination complete successfully and I tried rebooting the VDR appliance just in case. To resolve the issue I removed the share from the VDR, pointed the backups to other destinations and renamed the VMware Data Recovery subfolder in the destination, then re-added the share and pointed the backups, this of course creates a new Backup Store. Anyone have any ideas why this error is occuring, means I can't backup into this Backup Store any longer.

  Read the article

• bad pool header 0x00000019 in windows 7 home premium when connecting to net followed by BSOD.

  - by shankar

  Hi, I am have random blue screen errors with an error code of bad pool header 0x00000019 whenever I try going online. I use a usb datacard/modem but when I try logging in using a regular dsl/broadband connection, I have the same issue. I had searched the query in windows knowledge base which said it is an issue with windows 7 and have provided a hot fix which they do not gaurentee. My vendor says something is wrong with my ram and has ordered for a new set of ram, but in my opinion if it was a ram related issue, the crashes should have occured even while playing games which are supposed to be ram intensive...If you need the mini dumps I can provide you the same..Kindly revert back..

  Read the article

• Portable server room air-con options

  - by Bridgette

  We are looking for portable industrial aircond for our server room which whould blow hot air to the sealing cavity, split-system is not an option (http://www.ikoo.com.au/Aircond.png). Something exactly like this would be ideal, but unfortunately not available in AUS: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ACPA4000&ISOCountrycode=us http://www.apcmedia.com/salestools/ASTE-6Z2RUU_R1_EN.pdf. So we pretty much looking for competing products to the APC's NetworkAIR PA4000 available in AU. ? We currently have 3 x DeLonghi Penguino PACT120, but space is limited and getting more of these is prob not ideal.

  Read the article

• What would be the optimal disk config for SQL Server 2008 R2?

  - by Kev

  We have a new Dell R710 server that came with the following storage configuration: 8 x 146GB SAS 10k 6Gbps disks 1 x Perc H700 Integrated Controller (2 x 4 disks - 2 ports each supporting 4 disks) What would be the optimal configuration if we were just after performance? What would be the optimal configuration if we were after performance but wanted data resilience. As per 2 above but with a hot standby disk? We plan to run Windows 2008 R2 and SQL Server 2008 R2. Maximising storage capacity isn't a prime concern.

  Read the article

• What's the maximum safe temperature for a HD Radeon 6870?

  - by Adrian Grigore

  I'm running a passively cooled HD Radeon 6870 in my PC. While using 3D Acceleration, the temperature climbs up to 95 degrees Celsius according to SpeedFan. It seems a bit hot, but on the other hand I've seen other GPUs being specified to run up to 120 Degrees Celsius. The system is very stable, but Battlefield 3 crashes every few hours or so. On the other hand it might be the game's fault and not related to the GPU temperature at all. Does anyone know where I can find some manufacturer specs on the maximum allowed temperature for this GPU? Thanks, Adrian

  Read the article

• Intel Core i5-2467m - Turbo Boost not activating?

  - by Trevor Sullivan

  I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

  Read the article

• HAProxy -- pause/queue all traffic without losing requests

  - by Marc

  I basically have the same problem as mentioned in this thread -- I would like to temporarily suspend all requests to all servers of a certain backend, so that I can upgrade the backend and the database it uses. Since this is a live system, I would like to queue up requests, and send them to the backend servers once they've been upgraded. Since I'm doing a database upgrade with the code change, I have to upgrade all backend servers simultaneously, so I can't just bring one down at a time. I tried using the tcp-request options combined with removing the static healthcheck file as mentioned in that thread, but had no luck. Setting the default "maxconn" value to 0 seems to pause and queue connections as desired, but then there seems to be no way to increase the value back to a positive number without restarting HAProxy, which kills all requests that had been queued up until that point. (The "hot-reconfiguration" options using -sf and -st start a new process, which doesn't seem to do what I want). Is what I'm trying to do possible?

  Read the article

• Gateway SX2300-01u CPU/PSU issues

  - by Vlad

  I have a 2-yr-old Gateway SX2300-01u with an AMD Phenom X3 8550 that I feel has about a year or so of life left, but I am having a couple of hardware issues that I have not been able to resolve. First, the power supply fan sounds like much louder than before and the PSU itself is really hot. The PSU model (Liteon PS 5221-06) is not available at a reasonable price; are there any good alternatives? Could I replace just the PSU fan? Also, the CPU fan failed sometime back, but my replacement, which supposedly fits the MB (Socket AM2+) doesn't actually fit properly. Any idea why?

  Read the article

• Server Security

  - by mahatmanich

  I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

  Read the article

• Linux Mint 13 64bit Cinnamon and Oracle Virtualbox: 3d acceleration crash

  - by Stephen Swensen

  I've recently got an interest in Linux. After some research, it looks like Linux Mint 13 cinnamon is hot and I thought I'd try it out... I'm running Windows 7 64bit and have experience with Oracle Virtual Box. So I thought it would be a good idea to try out Linux Mint inside Virtual Box. I download Linux Mint 13 64bit Cinnamon and set it up in my VM player... Nothing special about my settings. Except Linux Mint 13 Cinnamon requires 3d acceleration, and when I enable that, it crashes whenever I open the Menu in the bottom left corner of the guest OS (and some other times too)... I've seen other mentions of this problem on the web, but no solutions. Is there a solution? If not, any suggestions short of installing the OS on a partition for trying out this OS (I'm not interested in the LIve mode either - I'd really like to get the full feel for it)?

  Read the article

• MYSQL backup and restore

  - by Codezy

  I am having trouble getting mysql backups to run properly when their are views in the database. I think this might have something to do with needing a placeholder object for it. In any event I run this command: mysqldump -u myuser -pmypassword mydatabase | mysql -u myuser -pmypassword -C mydatabase_Beta The user has full privileges and I get this: View mydatabase_beta.yadayada references invalid tables or columns or functions or definer/invoker or view lack rights to use them. How can I back it up so that it restores all of my database properly? In the example I am restoring it to a different name but I do need to be able to restore a working copy. I think it is probably an additional mysqldump parameter or maybe hot copy would work better. Thoughts?

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• Folder Redirection - Explorer requires manual refresh

  - by Pete

  Hello, I am having an issue where - when a users my documents folder is redirected to a DFS share, windows explorer requires a manual refresh after creating a new folder, file, etc. (Interestingly, not when making a new briefcase) I have tried a number of MS knowledge base articles, a hot-fix and a registry change, all with no success. (( http:// support.microsoft.com/?kbid=823291 ; http:// support.microsoft.com/kb/873392 )) The problem only occurs when going through the my documents icon. If I map a home drive for the user to the exact same location (IE - H:\DFS\user\documents) , open that drive and make new folders, then there is no problem. Mapping my documents to H:\ also resolves the issue, however, as we need folder sync and people logging on off site with cached profiles this is not a workable solution (as H: will not map and there will be no access to their docs.) Has anyone managed to figure a fix for this? Thanks, Pete.

  Read the article

• Enabling a trace spec on Glassfish v2

  - by Kiran

  Hi Guys, I guess this might be answered previously but I dont seem to find one answered . Can anyone please lemme know hot to add a trace spec in Glassfish v2. Am very much new to this so not much aware of this. I need to enable a security trace string and orb trace string on Glassfish v2 .On Glassfish v3 I see a file called logging.properties where all the trace string been given , is there any such file on v2 to work with or we need to add a property to domain.xml. Thanks in advance.

  Read the article

• Linux openSUSE 11.2 on VAIO Z890T

  - by alfredozn

  I have a VAIO Z-series (VGN-Z890T) and I want to install openSUSE 11.2. I found some guides to fix the problem for the video card switch, but all for older models, those preconfigured with windows vista. It looks like newer model use a different bios configuration to support hot swap between cards in Windows 7 and this change breaks the solution to my problem. I'm not an experienced linux user, but i was using it recently on my old computer ind definitively I want it on my laptop. I installed openSUSE once and i was trying and trying to solve it until I finished reinstall again and use a fresh installation. My question is: Does anyone has installed and configured successfully openSUSE on one of the latest vaio z laptops???

  Read the article

• Global hotkeys: songbird on KDE

  - by alpha1

  I'm running songbird on opensuse 11.2 KDE 4.3.1 on my EEE pc. On windows, there is a hotkey thing inside Songbird, so i set META F9,10,11,12 as media keys and it work just fine. On linux, there is not hotkey thing in songbird, and I would like to set those same hotkeys. I've played around with the Amarok Hotkeys, which are now setup that way, and looked in all the KDE shortcuts, but cannot find a way to add a new program and new hot keys. I know its possible, I did it before once, but the KDE shortcut programs have changed and I no longer see the stuff i used to do it before. I'd like to do the same to banshee at some point, but Songbird is the important program. Any Ideas? Any way to set those keys to generic media buttons?

  Read the article

• Windows 7 won't boot from raid-1 disks until secondary non-bootable disks are removed

  - by PaulP

  I have an ASUS X58 motherboard with a Intel ICH10R southbridge raid controller. Bootable raid-1 SATA disks are on channels 4, 5. Secondary raid-1 SATA disks are on channels 0,1. Everything was working OK until one time I removed the secondary disks and booted successfully but after I shut down and reinstalled the secondary disks rebooting fails with a "Please insert proper boot item" error. If I remove the secondary disks and reboot then do a hot-install of the disks after booting completes, then all is OK. Do I have a raid setup problem or is it something I can fix with Disk Manager.

  Read the article

• Linux: How to delay hddtemp service start at boot until all hdd are visible?

  - by Atis

  I live in a hot and humid environment, therefore I monitor the hdd temperature using hddtemp and gkrellm. There is an LSI9211 8i sata/sas controller in my computer. I have drives connected to both my motherboard and the LSI. hddtemp monitors only the drives directly connected to my motherboard after booting the system, therefore gkrellm displays the temperature of those drvies only. Logging in and restarting hddtemp before starting gkrellm fixes my issue, i.e. drives connected to the LSI controller are also visible. It seems that the drives connected to the LSI controller become visible only after hddtemp is started in the boot sequence. I think delaying it would help. How can I delay the starting of hddtemp till all drives are visible? I prefer a way to check if drives are visible to the delay of a specific amount of seconds.

  Read the article

• Email Deliverability on Yahoo is very poor. Any suggestions please?

  - by xarejay28x

  All other ISPs (Google, AOL, Hotmail) are fantastic, hitting 98-100% in the inbox. Yahoo is very random, and lately our deliverability has dropped drastically. All IPs are senders certified by Return Path and supposedly that automatically whitelists our IPs and allows us to send as many emails as we want (from what my boss says). Do I bother with applying to Yahoo's bulk sender form? I run every email campaign through: SpamAssassin (Excellent Scores) Test Accounts (for test deliverability) Old school HTML format I'm running out of ideas and I'm starting to be in the hot seat and I am very fearful for my job position. If you can offer any wise words i will be very grateful. Thank you in advance.

  Read the article

• Wake On Lan for Fedora 12

  - by Toymakerii

  I have a fedora 12 box that I am using as a sandbox for web development and a few other toys. The box gets really hot so I would like it to sleep/hibernate when no one is using it, however most of the people connecting to the box will not be able to access it physically. Is it possible to set up a Wake On Lan that wakes up the machine when it detects an SSH connection? A google search didn't yield much information. (or atleast I wasn't smart enough to register it as useful!)

  Read the article

• Intel Core i7-4960HQ vs. 4850HQ (Haswell) [on hold]

  - by Timothy R. Butler

  I'm looking at the new MacBook Pros and trying to decide between the Core i7-4960HQ (2.6 GHz) and i7-4850 (2.3 GHz). I've found some synthetic benchmarks comparing them, but I haven't found a lot of data, so I'd appreciate any pointers to good comparisons for the Haswell family (especially these two processors). My cursory analysis seems to suggest there isn't a huge gain from the extra 300 MHz. I'd like to determine not only whether this is generally true, but also to figure out if the gains that are made in performance come at too high of cost. Is the 2.6 going to be pushing the limits of what can fit in a thin laptop without overheating? I've looked at some of Intel's documentation, but have not been able to determine what the normal and maximum operating temperature differences are for the models. In the past, there have been times that Intel's fastest models in a given range ran especially hot and/or consumed significantly more power compared to slightly slower models. Do those concerns factor into the current generation?

  Read the article

• How to cope with runaway Flash plugin in Google Chrome browser?

  - by Norman Ramsey

  I'm using Google Chrome for Linux, version 5.0.307.11 (Official Build 39572) beta with the Linux Flash plugin version 10.0 r32. Quite often, the Flash plugin goes wild and pegs the CPU with about 95% usage. Laptop gets hot, battery drains. I can diagnose the problem with Chrome's little process monitor (shift-Esc), and I can even kill the plugin, but then when I actually want to use Flash on a page, I can't find a way to restart the plugin; I have to exit and restart Chrome, which with 30 tabs open is a huge hit. Does anyone know what causes this problem? Does anyone have a better workaround (or heaven forfend, a fix)? [I struct out both with search and with Google's help site for Chrome.]

  Read the article

• Mac Book Pro wakes up in my backpack

  - by J. Pablo Fernández

  This has happened to me twice: I press the power button on my Mac Book Pro, choose sleep, close it, unplug everything, confirm that is off (by pressing my ear to it) and put it in my bag. Some minutes later, the laptop wakes up by itself. Both times I caught it in time. The second time it was so hot I couldn't touch some parts -- it refused to actually wake up, and the screen was blank. Restarting it worked though. Any ideas what might be going on and/or how to prevent this? More details: It's a Mac Book Pro unibody 15" from 2009.

  Read the article

• Shrink Partition on Production Server

  - by Campo

  SO our production server was only setup with one large partition. I have setup a standby server and properly partitioned it. Now the boss wants the production environment's partition shrunk. It is an HP DL380 G5 We have 4 hot swap drives in a raid 5. How best should I go about doing this. Seems like a bad idea to me. Should I use windows or HP to do the partitioning? What should I be aware of in a production environment? The idea is to put the site (Inetpub) on a separate partition instead of the C: drive. How much downtime should I expect? Is this a terrible idea? Anything else I have missed?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >