Search Results

Search found 4619 results on 185 pages for 'kernel panic'.

Page 35/185 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• How to start Android Kernel programming?

  - by Rajapandian

  Hi All, I am 6 months experience in Android, use to develop simple UI based application. Now i want to write application targeting the Android core Kernel.For example i want to develop a Framework which is not present in Android.To achieve that we have to write the code for the Kernel. I dont know where and how to start the Android Kernel Programming. If anybody knows the way to start it please help me. Regards, Rajapandian.K

  Read the article

• Has perl thread same advantage as kernel thread?

  - by Niraj Nawanit

  Kernel threads do context switch at kernel level instead of process level. I am planning to set up an httpserver in perl. I want to know if perl threads have same advantage as kernel threads from the perspective of context switch.

  Read the article

• Performance Overhead of Perf Event Subsystem in Linux Kernel

  - by Bo Xiao

  Performance counters for Linux are a new kernel-based subsystem that provide a framework for all things performance analysis. It covers hardware level (CPU/PMU, Performance Monitoring Unit) features and software features (software counters, tracepoints) as well. Since 2.6.33, the kernel provide 'perf_event_create_kernel_counter' kernel api for developers to create kernel counter to collect system runtime information. What I concern most is the performance impact on overall system when tracepoint/ftrace is enabled. There are no docs I can find about them. I was once told that ftrace was implemented by dynamically patching code, will it slow the system dramatically?

  Read the article

• Statistics Question: Kernel Smoothing in R

  - by James Thompson

  I have data of this form: x y 1 0.19 2 0.26 3 0.40 4 0.58 5 0.59 6 1.24 7 0.68 8 0.60 9 1.12 10 0.80 11 1.20 12 1.17 13 0.39 I'm currently plotting a kernel-smoothed density estimate of the x versus y using this code: smoothed = ksmooth( d$resi, d$score, bandwidth = 6 ) plot( smoothed ) I simply want a plot of the x versus smoothed(y) values, which is ## Heading ## However, the documentation for ksmooth suggests that this isn't the best kernel-smoothing package available: This function is implemented purely for compatibility with S, although it is nowhere near as slow as the S function. Better kernel smoothers are available in other packages. What other kernel smoothers are better can these smoothers be found?

  Read the article

• OS kernel use Virtual memory for itself?

  - by max

  Does OS kernel use Virtual memory or Can some part of the OS kernel reside in Hard Disk?

  Read the article

• Different fan behaviour in my laptop after upgrade, what to do now?

  - by student

  After upgrading from lubuntu 13.10 to 14.04 the fan of my laptop seems to run much more often than in 13.10. When it runs, it doesn't run continously but starts and stops every second. fwts fan results in Results generated by fwts: Version V14.03.01 (2014-03-27 02:14:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 12/05/14 at 21:40:13 on host Linux einstein 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64. Command: "fwts fan". Running tests: fan. fan: Simple fan tests. -------------------------------------------------------------------------------- Test 1 of 2: Test fan status. Test how many fans there are in the system. Check for the current status of the fan(s). PASSED: Test 1, Fan cooling_device0 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device1 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device2 of type LCD has max cooling state 15 and current cooling state 10. Test 2 of 2: Load system, check CPU fan status. Test how many fans there are in the system. Check for the current status of the fan(s). Loading CPUs for 20 seconds to try and get fan speeds to change. Fan cooling_device0 current state did not change from value 0 while CPUs were busy. Fan cooling_device1 current state did not change from value 0 while CPUs were busy. ADVICE: Did not detect any change in the CPU related thermal cooling device states. It could be that the devices are returning static information back to the driver and/or the fan speed is automatically being controlled by firmware using System Management Mode in which case the kernel interfaces being examined may not work anyway. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: NONE Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ fan | 3| | | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 3| 0| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Here is the output of lsmod lsmod Module Size Used by i8k 14421 0 zram 18478 2 dm_crypt 23177 0 gpio_ich 13476 0 dell_wmi 12761 0 sparse_keymap 13948 1 dell_wmi snd_hda_codec_hdmi 46207 1 snd_hda_codec_idt 54645 1 rfcomm 69160 0 arc4 12608 2 dell_laptop 18168 0 bnep 19624 2 dcdbas 14928 1 dell_laptop bluetooth 395423 10 bnep,rfcomm iwldvm 232285 0 mac80211 626511 1 iwldvm snd_hda_intel 52355 3 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30144 1 snd_seq_midi coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi joydev 17381 0 serio_raw 13462 0 iwlwifi 169932 1 iwldvm pcmcia 62299 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29482 2 snd_pcm,snd_seq lpc_ich 21080 0 cfg80211 484040 3 iwlwifi,mac80211,iwldvm yenta_socket 41027 0 pcmcia_rsrc 18407 1 yenta_socket pcmcia_core 23592 3 pcmcia,pcmcia_rsrc,yenta_socket binfmt_misc 17468 1 snd 69238 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi soundcore 12680 1 snd parport_pc 32701 0 mac_hid 13205 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc firewire_ohci 40409 0 psmouse 102222 0 sdhci_pci 23172 0 sdhci 43015 1 sdhci_pci firewire_core 68769 1 firewire_ohci crc_itu_t 12707 1 firewire_core ahci 25819 2 libahci 32168 1 ahci i915 783485 2 wmi 19177 1 dell_wmi i2c_algo_bit 13413 1 i915 drm_kms_helper 52758 1 i915 e1000e 254433 0 drm 302817 3 i915,drm_kms_helper ptp 18933 1 e1000e pps_core 19382 1 ptp video 19476 1 i915 I tried one answer to the similar question: loud fan on Ubuntu 14.04 and created a /etc/i8kmon.conf like the following: # Run as daemon, override with --daemon option set config(daemon) 1 # Automatic fan control, override with --auto option set config(auto) 1 # Status check timeout (seconds), override with --timeout option set config(timeout) 2 # Report status on stdout, override with --verbose option set config(verbose) 1 # Temperature thresholds: {fan_speeds low_ac high_ac low_batt high_batt} set config(0) {{0 0} -1 55 -1 55} set config(1) {{0 1} 50 60 55 65} set config(2) {{1 1} 55 80 60 85} set config(3) {{2 2} 70 128 75 128} With this setup the fan goes on even if the temperature is below 50 degree celsius (I don't see a pattern). However I get the impression that the CPU got's hotter in average than without this file. What changes from 13.10 to 14.04 may be responsible for this? If this is a bug, for which package I should report the bug?

  Read the article

• "postgres blocked for more than 120 seconds" - is my db still consistent?

  - by nn4l

  I am using an iscsi volume on an Open-E storage system for several virtual machines running on a XenServer host. Occasionally, when there is a very high disk I/O load on the virtual machines (and therefore also on the storage system), I got this error message on the vm consoles: [2594520.161701] INFO: task kjournald:117 blocked for more than 120 seconds. [2594520.161787] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [2594520.162194] INFO: task flush-202:0:229 blocked for more than 120 seconds. [2594520.162274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [2594520.162801] INFO: task postgres:1567 blocked for more than 120 seconds. [2594520.162882] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. I understand this error message is caused by the kernel to inform that these processes haven't been run for 120 seconds, most likely because a disk access to the storage system has not yet been processed. But what is the effect on the processes. For example, will the postgres process eventually write its data when the storage system is idle again after a few minutes, so that all data is still consistent? Or will it abort the write, leaving some tables in an inconsistent state? I certainly expect that the former should be the case - if the disk access is slow, postgres (or any other affected process) should just wait as long as it takes. I can live with the application hanging for a few minutes. But if there is a chance for data corruption then any of these errors is really bad news. Please advise what to do here.

  Read the article

• tc u32 --- how to match L2 protocols in recent kernels?

  - by brownian

  I have a nice shaper, with hashed filtering, built at a linux bridge. In short, br0 connects external and internal physical interfaces, VLAN tagged packets are bridged "transparently" (I mean, no VLAN interfaces are there). Now, different kernels do it differently. I can be wrong with exact kernel verions ranges, please forgive me. Thanks. 2.6.26 So, in debian, 2.6.26 and up (up to 2.6.32, I believe) --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 Here, "kernel" matches two bytes in "protocol" field with 0x8100, but counts the beginning of ip packet as a "zero position" (sorry for my English, if I'm a bit unclear). 2.6.32 Again, in debian (I've not built vanilla kernel), 2.6.32-5 --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 at 20 flowid 1:200 Here, "kernel" matches the same for protocol, but counts offset from the beginning of this protocol's header --- I have to add 4 bytes to offset (20, not 16 for dst address). It's ok, seems more logical, as for me. 3.2.11, the latest stable now This works --- as if there is no 802.1q tag at all: tc filter add dev internal protocol ip parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 The problem is that I couldn't find a way to match 802.1q tag so far. Matching 802.1q tag at past I could do this before as follows: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 match u16 0x0ed8 0x0fff at -4 flowid 1:300 Now I'm unable to match 802.1q tag with at 0, at -2, at -4, at -6 or like that. The main issue that I have zero hits count --- this filter is not being checked at all, "wrong protocol", in other words. Please, anyone, help me :-) Thanks!

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• iTunes 9.0.2 hangs on launch on Mac OS X 10.6.2

  - by dlamblin

  My iTunes 9.0.2 hangs on launch in OS X 10.6.2. This doesn't happen all the time, only if I've been running for a while. Then it will recur until I restart. Similarly Safari 4.0.4 will hang in the flash player plugin when about to play a video. If I restart both these problems go away until later. Based on this crash dump I am suspecting Audio Hijack Pro. I will try to install a newer version of the driver involved, but so far I haven't had much luck. I have uninstalled the Flash Plugin (10.0.r42 and r32) but clearly I want it in the long run. This is iTunes' crash report. Date/Time: 2009-12-14 19:56:02 -0500 OS Version: 10.6.2 (Build 10C540) Architecture: x86_64 Report Version: 6 Command: iTunes Path: /Applications/iTunes.app/Contents/MacOS/iTunes Version: 9.0.2 (9.0.2) Build Version: 2 Project Name: iTunes Source Version: 9022501 Parent: launchd [120] PID: 16878 Event: hang Duration: 3.55s (sampling started after 2 seconds) Steps: 16 (100ms sampling interval) Pageins: 5 Pageouts: 0 Process: iTunes [16878] Path: /Applications/iTunes.app/Contents/MacOS/iTunes UID: 501 Thread 8f96000 User stack: 16 ??? (in iTunes + 6633) [0x29e9] 16 ??? (in iTunes + 6843) [0x2abb] 16 ??? (in iTunes + 11734) [0x3dd6] 16 ??? (in iTunes + 44960) [0xbfa0] 16 ??? (in iTunes + 45327) [0xc10f] 16 ??? (in iTunes + 2295196) [0x23159c] 16 ??? (in iTunes + 103620) [0x1a4c4] 16 ??? (in iTunes + 105607) [0x1ac87] 16 ??? (in iTunes + 106442) [0x1afca] 16 OpenAComponent + 433 (in CarbonCore) [0x972e9dd0] 16 CallComponentOpen + 43 (in CarbonCore) [0x972ebae7] 16 CallComponentDispatch + 29 (in CarbonCore) [0x972ebb06] 16 DefaultOutputAUEntry + 319 (in CoreAudio) [0x70031117] 16 AUGenericOutputEntry + 15273 (in CoreAudio) [0x7000e960] 16 AUGenericOutputEntry + 13096 (in CoreAudio) [0x7000e0df] 16 AUGenericOutputEntry + 9628 (in CoreAudio) [0x7000d353] 16 ??? [0xe0c16d] 16 ??? [0xe0fdf8] 16 ??? [0xe0e1e7] 16 ahs_hermes_CoreAudio_init + 32 (in Instant Hijack Server) [0x13fc7e9] 16 semaphore_wait_signal_trap + 10 (in libSystem.B.dylib) [0x9798e922] Kernel stack: 16 semaphore_wait_continue + 0 [0x22a0a5] Thread 9b9eb7c User stack: 16 thread_start + 34 (in libSystem.B.dylib) [0x979bbe42] 16 _pthread_start + 345 (in libSystem.B.dylib) [0x979bbfbd] 16 ??? (in iTunes + 4011870) [0x3d475e] 16 CFRunLoopRun + 84 (in CoreFoundation) [0x993497a4] 16 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x99343864] 16 __CFRunLoopRun + 2079 (in CoreFoundation) [0x9934477f] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x9798e8da] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 9bc8b7c User stack: 16 start_wqthread + 30 (in libSystem.B.dylib) [0x979b4336] 16 _pthread_wqthread + 390 (in libSystem.B.dylib) [0x979b44f1] 16 _dispatch_worker_thread2 + 234 (in libSystem.B.dylib) [0x979b4a68] 16 _dispatch_queue_invoke + 163 (in libSystem.B.dylib) [0x979b4cc3] 16 kevent + 10 (in libSystem.B.dylib) [0x979b50ea] Kernel stack: 16 kevent + 97 [0x471745] Binary Images: 0x1000 - 0xbecfea com.apple.iTunes 9.0.2 (9.0.2) <1F665956-0131-39AF-F334-E29E510D42DA> /Applications/iTunes.app/Contents/MacOS/iTunes 0x13f6000 - 0x1402ff7 com.rogueamoeba.audio_hijack_server.hermes 2.2.2 (2.2.2) <9B29AE7F-6951-E63F-616A-482B62179A5C> /usr/local/hermes/modules/Instant Hijack Server.hermesmodule/Contents/MacOS/Instant Hijack Server 0x70000000 - 0x700cbffb com.apple.audio.units.Components 1.6.1 (1.6.1) <600769A2-479A-CA6E-A214-C8766F7CBD0F> /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio 0x97284000 - 0x975a3fe7 com.apple.CoreServices.CarbonCore 861.2 (861.2) <A9077470-3786-09F2-E0C7-F082B7F97838> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x9798e000 - 0x97b32feb libSystem.B.dylib ??? (???) <D45B91B2-2B4C-AAC0-8096-1FC48B7E9672> /usr/lib/libSystem.B.dylib 0x99308000 - 0x9947ffef com.apple.CoreFoundation 6.6.1 (550.13) <AE9FC6F7-F0B2-DE58-759E-7DB89C021A46> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation Process: AirPort Base Station Agent [142] Path: /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent UID: 501 Thread 8b1d3d4 DispatchQueue 1 User stack: 16 ??? (in AirPort Base Station Agent + 5344) [0x1000014e0] 16 ??? (in AirPort Base Station Agent + 70666) [0x10001140a] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 8b80000 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 6e3c7a8 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x7fff878869da] Kernel stack: 16 workqueue_thread_yielded + 562 [0x4cb6ae] Thread 8b0f3d4 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x7fff878b09e2] Kernel stack: 16 sleep + 52 [0x487f93] Thread 8bcb000 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 ??? (in AirPort Base Station Agent + 71314) [0x100011692] 16 ??? (in AirPort Base Station Agent + 13712) [0x100003590] 16 ??? (in AirPort Base Station Agent + 71484) [0x10001173c] 16 __semwait_signal + 10 (in libSystem.B.dylib) [0x7fff878a79ee] Kernel stack: 16 semaphore_wait_continue + 0 [0x22a0a5] Binary Images: 0x100000000 - 0x100016fff com.apple.AirPortBaseStationAgent 1.5.4 (154.2) <73DF13C1-AF86-EC2C-9056-8D1946E607CF> /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: AppleSpell [3041] Path: /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell UID: 501 Thread 999a000 DispatchQueue 1 User stack: 16 ??? (in AppleSpell + 5852) [0x1000016dc] 16 ??? (in AppleSpell + 6508) [0x10000196c] 16 -[NSSpellServer run] + 72 (in Foundation) [0x7fff81d3b796] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 8a9e7a8 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Binary Images: 0x100000000 - 0x1000a9fef com.apple.AppleSpell 1.6.1 (61.1) <6DE57CC1-77A0-BC06-45E7-E1EACEBE1A88> /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell 0x7fff81cbc000 - 0x7fff81f3dfe7 com.apple.Foundation 6.6.1 (751.14) <767349DB-C486-70E8-7970-F13DB4CDAF37> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: autofsd [52] Path: /usr/libexec/autofsd UID: 0 Thread 79933d4 DispatchQueue 1 User stack: 16 ??? (in autofsd + 5340) [0x1000014dc] 16 ??? (in autofsd + 6461) [0x10000193d] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 75997a8 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Binary Images: 0x100000000 - 0x100001ff7 autofsd ??? (???) <29276FAC-AEA8-1520-5329-C75F9D453D6C> /usr/libexec/autofsd 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: blued [51] Path: /usr/sbin/blued UID: 0 Thread 7993000 DispatchQueue 1 User stack: 16 ??? (in blued + 5016) [0x100001398] 16 ??? (in blued + 152265) [0x1000252c9] 16 -[NSRunLoop(NSRunLoop) run] + 77 (in Foundation) [0x7fff81d07903] 16 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 270 (in Foundation) [0x7fff81d07a24] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 70db000 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 84d2000 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x7fff878b09e2] Kernel stack: 16 sleep + 52 [0x487f93] Binary Images: 0x100000000 - 0x100044fff blued ??? (???) <ECD752C9-F98E-3052-26BF-DC748281C992> /usr/sbin/blued 0x7fff81cbc000 - 0x7fff81f3dfe7 com.apple.Foundation 6.6.1 (751.14) <767349DB-C486-70E8-7970-F13DB4CDAF37> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: check_afp [84504] Path: /System/Library/Filesystems/AppleShare/check_afp.app/Contents/MacOS/check_afp UID: 0 Thread 1140f000 DispatchQueue 1 User stack: 16 ??? (in check_afp + 5596) [0x1000015dc] 16 ??? (in check_afp + 12976) [0x1000032b0] 16 ??? (in check_afp + 6664) [0x100001a08] 16 ??? (in check_afp + 6520) [0x100001978] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 13ad8b7c DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 13ad6b7c User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 ??? (in check_afp + 13071) [0x10000330f] 16 mach_msg_server_once + 285 (in libSystem.B.dylib) [0x7fff878b2417] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 13ad87a8 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x7fff878b09e2] Kernel stack: 16 sleep + 52 [0x487f93] Binary Images: 0x100000000 - 0x100004ff7 com.apple.check_afp 2.0 (2.0) <EE865A7B-8CDC-7649-58E1-6FE2B43F7A73> /System/Library/Filesystems/AppleShare/check_afp.app/Contents/MacOS/check_afp 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: configd [14] Path: /usr/libexec/configd UID: 0 Thread 704a3d4 DispatchQueue 1 User stack: 16 start + 52 (in configd) [0x100001488] 16 main + 2051 (in configd) [0x100001c9e] 16 server_loop + 72 (in configd) [0x1000024f4] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 6e70000 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 74a7b7c User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 plugin_exec + 1440 (in configd) [0x100003c5b] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 7560000 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 _io_pm_force_active_settings + 2266 (in PowerManagement) [0x10050f968] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 75817a8 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 select$DARWIN_EXTSN + 10 (in libSystem.B.dylib) [0x7fff878b09e2] Kernel stack: 16 sleep + 52 [0x487f93] Thread 8b1db7c User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x7fff878869da] Kernel stack: 16 workqueue_thread_yielded + 562 [0x4cb6ae] Binary Images: 0x100000000 - 0x100026ff7 configd ??? (???) <58C02CBA-5556-4CDC-2763-814C4C7175DE> /usr/libexec/configd 0x10050c000 - 0x10051dfff com.apple.SystemConfiguration.PowerManagement 160.0.0 (160.0.0) <0AC3D2ED-919E-29C7-9EEF-629FBDDA6159> /System/Library/SystemConfiguration/PowerManagement.bundle/Contents/MacOS/PowerManagement 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: coreaudiod [114] Path: /usr/sbin/coreaudiod UID: 202 Thread 83b93d4 DispatchQueue 1 User stack: 16 ??? (in coreaudiod + 3252) [0x100000cb4] 16 ??? (in coreaudiod + 26505) [0x100006789] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 847e3d4 DispatchQueue 2 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 854c000 User stack: 3 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 3 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x7fff878869da] Kernel stack: 3 workqueue_thread_yielded + 562 [0x4cb6ae] Binary Images: 0x100000000 - 0x10001ffef coreaudiod ??? (???) <A060D20F-A6A7-A3AE-84EC-11D7D7DDEBC6> /usr/sbin/coreaudiod 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: coreservicesd [66] Path: /System/Library/CoreServices/coreservicesd UID: 0 Thread 7994000 DispatchQueue 1 User stack: 16 ??? (in coreservicesd + 3756) [0x100000eac] 16 _CoreServicesServerMain + 522 (in CarbonCore) [0x7fff8327a972] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread 76227a8 User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 read + 10 (in libSystem.B.dylib) [0x7fff87877426] Kernel stack: 16 lo64_unix_scall + 77 [0x29e3fd] 16 unix_syscall64 + 617 [0x4ee947] 16 read_nocancel + 158 [0x496add] 16 write + 312 [0x49634d] 16 get_pathbuff + 3054 [0x3023db] 16 tsleep + 105 [0x4881ce] 16 wakeup + 786 [0x487da7] 16 thread_block + 33 [0x226fb5] 16 thread_block_reason + 331 [0x226f27] 16 thread_dispatch + 1950 [0x226c88] 16 machine_switch_context + 753 [0x2a5a37] Thread 7622b7c User stack: 16 thread_start + 13 (in libSystem.B.dylib) [0x7fff878a5e41] 16 _pthread_start + 331 (in libSystem.B.dylib) [0x7fff878a5f8e] 16 fmodWatchConsumer + 347 (in CarbonCore) [0x7fff8322f23f] 16 __semwait_signal + 10 (in libSystem.B.dylib) [0x7fff878a79ee] Kernel stack: 16 semaphore_wait_continue + 0 [0x22a0a5] Thread 79913d4 User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 244 (in libSystem.B.dylib) [0x7fff87887286] 16 _dispatch_queue_invoke + 185 (in libSystem.B.dylib) [0x7fff8788775c] 16 kevent + 10 (in libSystem.B.dylib) [0x7fff87885bba] Kernel stack: 16 kevent + 97 [0x471745] Thread 84d2b7c User stack: 16 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 16 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x7fff878869da] Kernel stack: 16 workqueue_thread_yielded + 562 [0x4cb6ae] Thread 9b643d4 User stack: 15 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 15 __workq_kernreturn + 10 (in libSystem.B.dylib) [0x7fff878869da] Kernel stack: 16 workqueue_thread_yielded + 562 [0x4cb6ae] Binary Images: 0x100000000 - 0x100000fff coreservicesd ??? (???) <D804E55B-4376-998C-AA25-2ADBFDD24414> /System/Library/CoreServices/coreservicesd 0x7fff831cb000 - 0x7fff834fdfef com.apple.CoreServices.CarbonCore 861.2 (861.2) <39F3B259-AC2A-792B-ECFE-4F3E72F2D1A5> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x7fff86e3b000 - 0x7fff86faeff7 com.apple.CoreFoundation 6.6.1 (550.13) <1E952BD9-37C6-16BE-B2F0-CD92A6283D37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: cron [31] Path: /usr/sbin/cron UID: 0 Thread 75acb7c DispatchQueue 1 User stack: 16 ??? (in cron + 2872) [0x100000b38] 16 ??? (in cron + 3991) [0x100000f97] 16 sleep + 61 (in libSystem.B.dylib) [0x7fff878f5090] 16 __semwait_signal + 10 (in libSystem.B.dylib) [0x7fff878a79ee] Kernel stack: 16 semaphore_wait_continue + 0 [0x22a0a5] Binary Images: 0x100000000 - 0x100006fff cron ??? (???) <3C5DCC7E-B6E8-1318-8E00-AB721270BFD4> /usr/sbin/cron 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: cvmsServ [104] Path: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/cvmsServ UID: 0 Thread 761f3d4 DispatchQueue 1 User stack: 16 ??? (in cvmsServ + 4100) [0x100001004] 16 ??? (in cvmsServ + 23081) [0x100005a29] 16 mach_msg_server + 597 (in libSystem.B.dylib) [0x7fff878ea1c8] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Binary Images: 0x100000000 - 0x100008fff cvmsServ ??? (???) <6200AD80-4159-5656-8736-B72B7388C461> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/cvmsServ 0x7fff8786c000 - 0x7fff87a2aff7 libSystem.B.dylib ??? (???) <526DD3E5-2A8B-4512-ED97-01B832369959> /usr/lib/libSystem.B.dylib Process: DirectoryService [11] Path: /usr/sbin/DirectoryService UID: 0 Thread 70db7a8 DispatchQueue 1 User stack: 16 start + 52 (in DirectoryService) [0x10000da74] 16 main + 3086 (in DirectoryService) [0x10000e68a] 16 CFRunLoopRun + 70 (in CoreFoundation) [0x7fff86e859b6] 16 CFRunLoopRunSpecific + 575 (in CoreFoundation) [0x7fff86e85c2f] 16 __CFRunLoopRun + 1698 (in CoreFoundation) [0x7fff86e867a2] 16 mach_msg_trap + 10 (in libSystem.B.dylib) [0x7fff8786ce3a] Kernel stack: 16 ipc_mqueue_receive_continue + 0 [0x210aa3] Thread <multiple> DispatchQueue 6 User stack: 17 start_wqthread + 13 (in libSystem.B.dylib) [0x7fff87886a55] 17 _pthread_wqthread + 353 (in libSystem.B.dylib) [0x7fff87886bb8] 16 _dispatch_worker_thread2 + 231 (in libSystem.B.dylib) [0x7fff87887279] 16 _dispatch_call_block_and_release + 15 (in libSystem.B.dylib) [0x7fff878a8ce8] 16 syscall + 10 (in libSystem.B.dylib) [0x7fff878a92da] 1 _disp

  Read the article

• Getting kernel errors when manually mounting VirtualBox shared folders

  - by Ross

  Updated: I've rephrased this problem as I understand it a bit more now (and have encountered another problem). I'm using a Fedora 15 guest on a Windows 7 host using VirtualBox. I am trying to mount a partition on the host PC as a shared folder for use in the guest. The folder appears in /media and is accessible when I use the auto-mount feature when setting up the shared folder, but when I attempt to mount without auto-mount I get the following error: $ sudo mount.vboxsf data /mnt/host_data /sbin/mount.vboxsf: Could not add an entry to the mount table.: Invalid argument In addition a popup appears (part of Fedora/GNOME) reporting a crash in the kernel package: WARNING: at lib/list_debug.c:26 __list_add+0x3e/0x81() However the shared folder seems to work, I can certainly browse it (although everything seems to be executable, probably down to a Windows host). Is there something wrong with what I'm doing or is this a bug (and in which case should it be reported to the Linux Kernel team or VirtualBox)?

  Read the article

• Kernel-mode Authentication: 401 errors when accessing site from remote machines

  - by CJM

  I have several Classic ASP sites that use Integrated Windows Authentication and Kerberos delegation. They work OK on the live servers (recently moved to a Server 2008/IIS7 servers), but do not work fully on my development PC or my development server. The IIS on both machines were configured through an IIS web deployment tool package which was exported from an old machine; the deployment didn't work perfectly, and I had to tinker a bit to get the sites working. When accessing the apps locally on either machine, they work fine; when accessing from another machine, the user is prompted by a username/password dialog, and regardless of what you enter, ultimately it results in a 401 (Unauthorised) error. I've tried comparing the configuration of these machines against similar live servers (that all work fine), and they seem generally comparable (given that none of the live servers are yet on IIS7.5 (Windows 7/Server 2008 R2). These applications run in a common application pool which uses a special domain user as it's identity - this user has similar permissions on the live and development machines. On IIS6 platforms, to enable kerberos delegation, I needed to set up some SPNs for this user, and they are still in place (even though I don't believe they are needed any longer for IIS7+ due to kernel-mode authentication), Furthermore, this account is enabled for Kerberos delegation in Active Directory, as is each machine I am dealing with. I'm considering the possibility that the deployment might have made changes/failed to make changes to the IIS configuration thus causing this problem. Perhaps a complete rebuild (minus another web deployment attempt) would solve the problem, but I'd rather fix (thus understand) the current problem. Any ideas so far? I've just had another attempt at fixing this issue, and I've made some progress, but I don't have a complete fix...yet. I've discovered that if I access the sites via IP address (than via NetBIOS name), I get the same dialog, except that it accepts my credentials and thus the application works - not quite a fix, but a useful step. More interestingly, I discovered that if I disable Kernel-mode authentication (in IIS Manager Website Authentication Advanced Settings), the applications work perfectly. My foggy understanding is that this is effectively working in the pre-IIS7 way. A reasonable short-term solution, but consider the following explicit advice from IIS on this issue: By default, IIS enables kernel-mode authentication, which may improve authentication performance and prevent authentication problems with application pools configured to use a custom identity. As a best practice, do not disable this setting if Kerberos authentication is used in your environment and the application pool is configured to use a custom identity. Clearly, this is not the way my applications should be working. So what is the issue?

  Read the article

• Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

  - by MK.

  I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

  Read the article

• ASUS N550 laptop not charging on ubuntu after updating kernel

  - by OBY Trance

  I'm using Ubuntu 13.10 on a pretty new ASUS N550jv laptop. When I was using kernel linux-image-3.11.0-11 everything was quite well (kinda..), however, when I updated the kernel using the automatic update, the kernels which were released afterwards (12+) were faulty on my machine, and caused the battery not to be charged and only stay at their current charging level (even when the machine was off!) The only fix I had was to roll-back to the '..11' version (on boot screen - advanced options), and hard-reboot (AC cord disconnected and reconnected) but now version 14 was released and "pushed away" the good old version 11. How can I fix that?? Please help me...

  Read the article

• CUDA: How to reuse kernels in multiple files (for unit testing)

  - by zenna

  How can I go about reusing the same kernel without getting fatal linking errors due to defining the symbol multiple times In Visual Studio I get "fatal error LNK1169: one or more multiply defined symbols found" My current structure is as follows: Interface.h has an extern interface to a C function: myCfunction() (ala the C++ integration SDK example) Kernel.cu contains the actual __global__ kernels and is NOT included in the build: __global__ my_kernel() Wrapper.cu inlcudes Kernel.cu and Interface.h and calls my_kernel<<<...>>> This all works fine. But if I add another C function in another file which also includes Kernel.cu and uses those kernels, I get the errors. So how can I reuse the kernels in Kernel.cu among many C functions in different files. The purpose of this by the way is unit testing, and integrating my kernels with CPP unit, if there is no way to reuse kernels (there must be!) then other suggestions for unit testing kernels within my existing CPP unit framework would be appreciate. Thanks Zenna

  Read the article

• MacBook Pro Late 2009 SATA Resets, Slowness (Is my motherboard dying on both machines?)

  - by A Student at a University

  My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. Some, but not all, resets correlate with AC power connects and disconnects. I don't think the warnings do. (How do I tell?) What are these errors? What causes them? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16[ 0.792047] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X 02:37:16[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16[ 0.792111] ahci 0000:00:0b.0: setting latency timer to 64 02:37:16[ 0.813473] scsi0 : ahci 02:37:16[ 0.823340] scsi1 : ahci 02:37:16[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16[ 1.229570] ata2.00: configured for UDMA/133 02:37:16[ 1.240120] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.240123] ata2: irq_stat 0x00000040, connection status changed 02:37:16[ 1.240127] ata2: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.240133] ata2: hard resetting link 02:37:16[ 1.260738] ata1.00: configured for UDMA/133 02:37:16[ 1.280111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.280114] ata1: irq_stat 0x00000040, connection status changed 02:37:16[ 1.280118] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.280122] ata1: hard resetting link 02:37:16[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.994215] ata2.00: configured for UDMA/133 02:37:16[ 1.994220] ata2: EH complete 02:37:16[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 2.090773] ata1.00: configured for UDMA/133 02:37:16[ 2.090778] ata1: EH complete 02:37:16[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16[ 2.091165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 02:37:16[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16[ 2.091582] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 02:37:16[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25[ 19.641532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.641532] ata1: irq_stat 0x00000040, connection status changed 02:37:25[ 19.641532] ata1: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.641533] ata1: hard resetting link 02:37:25[ 19.642076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.642078] ata2: irq_stat 0x00000040, connection status changed 02:37:25[ 19.642081] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.642084] ata2: hard resetting link 02:37:26[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.396697] ata2.00: configured for UDMA/133 02:37:26[ 20.396703] ata2: EH complete 02:37:26[ 20.451491] ata1.00: configured for UDMA/133 02:37:26[ 20.451498] ata1: EH complete 02:37:30[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30[ 24.627236] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:37:30[ 24.627240] ata1: irq_stat 0x00000040, connection status changed 02:37:30[ 24.627242] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.627246] ata1: hard resetting link 02:37:30[ 24.632241] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:30[ 24.632244] ata2: irq_stat 0x00000040, connection status changed 02:37:30[ 24.632247] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.632250] ata2: hard resetting link 02:37:31[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.386782] ata2.00: configured for UDMA/133 02:37:31[ 25.386788] ata2: EH complete 02:37:31[ 25.431668] ata1.00: configured for UDMA/133 02:37:31[ 25.431674] ata1: EH complete 02:45:54[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622568] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:55[ 529.622572] ata1: irq_stat 0x00400040, connection status changed 02:45:55[ 529.622576] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622583] ata1: hard resetting link 02:45:55[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622613] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:55[ 529.622616] ata2: irq_stat 0x00000040, connection status changed 02:45:55[ 529.622620] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622624] ata2: hard resetting link 02:45:56[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.384305] ata2.00: configured for UDMA/133 02:45:56[ 530.384314] ata2: EH complete 02:45:56[ 530.399225] ata1.00: configured for UDMA/133 02:45:56[ 530.399233] ata1: EH complete 02:45:58[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58[ 532.590968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5840000 action 0xe frozen t4 02:45:58[ 532.590973] ata1: irq_stat 0x00000040, connection status changed 02:45:58[ 532.590977] ata1: SError: { CommWake LinkSeq TrStaTrns DevExch } 02:45:58[ 532.590983] ata1: hard resetting link 02:45:58[ 532.591034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:45:58[ 532.591037] ata2: irq_stat 0x00000040, connection status changed 02:45:58[ 532.591041] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:58[ 532.591045] ata2: hard resetting link 02:45:59[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.344416] ata2.00: configured for UDMA/133 02:45:59[ 533.344424] ata2: EH complete 02:45:59[ 533.360839] ata1.00: configured for UDMA/133 02:45:59[ 533.360847] ata1: EH complete 02:45:59[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59[ 533.660117] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:59[ 533.660122] ata2: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660126] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660132] ata2: hard resetting link 02:45:59[ 533.660141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:59[ 533.660143] ata1: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660147] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660151] ata1: hard resetting link 02:46:00[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.416768] ata2.00: configured for UDMA/133 02:46:00[ 534.416777] ata2: EH complete 02:46:00[ 534.431396] ata1.00: configured for UDMA/133 02:46:00[ 534.431401] ata1: EH complete 02:46:03[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03[ 537.585992] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:03[ 537.585996] ata1: irq_stat 0x00000040, connection status changed 02:46:03[ 537.585999] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586002] ata1: hard resetting link 02:46:03[ 537.586028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:46:03[ 537.586030] ata2: irq_stat 0x00000040, connection status changed 02:46:03[ 537.586033] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586036] ata2: hard resetting link 02:46:04[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.334389] ata2.00: configured for UDMA/133 02:46:04[ 538.334398] ata2: EH complete 02:46:04[ 538.343511] ata1.00: configured for UDMA/133 02:46:04[ 538.343519] ata1: EH complete 02:46:04[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:46:04[ 538.540148] ata1: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540153] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540159] ata1: hard resetting link 02:46:04[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540207] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:46:04[ 538.540211] ata2: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540215] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540220] ata2: hard resetting link 02:46:05[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.294100] ata2.00: configured for UDMA/100 02:46:05[ 539.294106] ata2: EH complete 02:46:05[ 539.314125] ata1.00: configured for UDMA/100 02:46:05[ 539.314132] ------------[ cut here ]------------ 02:46:05[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05[ 539.314144] Hardware name: MacBookPro5,3 02:46:05[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05[ 539.314224] Call Trace: 02:46:05[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05[ 539.314296] ata1: EH complete 02:46:12[ 547.040091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen 02:46:12[ 547.040098] ata1.00: failed command: IDENTIFY DEVICE 02:46:12[ 547.040106] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in 02:46:12[ 547.040108] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) 02:46:12[ 547.040111] ata1.00: status: { DRDY } 02:46:12[ 547.040117] ata1: hard resetting link 02:46:13[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13[ 547.408430] ata1.00: configured for UDMA/100 02:46:13[ 547.408438] ------------[ cut here ]------------ 02:46:13[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13[ 547.408451] Hardware name: MacBookPro5,3 02:46:13[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13[ 547.408531] Call Trace: 02:46:13[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13[ 547.408620] ata1: EH complete 02:46:13[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13[ 547.738204] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:13[ 547.738208] ata1: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738212] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738218] ata1: hard resetting link 02:46:13[ 547.738262] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:13[ 547.738265] ata2: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738269] ata2: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738274] ata2: hard resetting link 02:46:14[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.486809] ata2.00: configured for UDMA/100 02:46:14[ 548.486818] ata2: EH complete 02:46:14[ 548.498998] ata1.00: configured for UDMA/33 02:46:14[ 548.499004] ata1: EH complete 02:46:18[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18[ 552.529674] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529678] ata1: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529680] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529684] ata1: hard resetting link 02:46:18[ 552.529716] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529718] ata2: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529720] ata2: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529723] ata2: hard resetting link 02:46:19[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.284141] ata2.00: configured for UDMA/100 02:46:19[ 553.284150] ata2: EH complete 02:46:19[ 553.301629] ata1.00: configured for UDMA/33 02:46:19[ 553.301637] ata1: EH complete

  Read the article

• Running complete Native Linux on phones that are bootloader-unlocked [on hold]

  - by james

  Since there are many phones (HTC, Samsung, LG, Nexus) today that have bootloader unlocked, I want to ask what's preventing them from running a complete native GNU/Linux. GNU/Linux has ARM port and we can run a command line GNU/Linux on top of Android by the method of chroot. So, what's preventing for existing bootloader unlocked Android phones from running a complete GNU/Linux natively? The device should get a long shelf life if it has one such port. My few thoughts.. Proprietary drivers for hardware that cannot be made to work when using a different OS. And the binary provider will never support any OS other than what the phone is shipped with. Application Interface. The interface for desktop apps doesn't fit to the mobile display with different PPI. Kernel. Since android devices use Linux kernel whose sources should be available, could the device kernel be modified to work with GNU/Linux. And any other reasons?

  Read the article

• Random flickering on 2.6.32 kernels after suspend

  - by whitequark

  I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

  Read the article

• Our Server Rooted but exploit doesnt work?

  - by Salina Odelva

  Hi everyone. My friend's hosting server got rooted and we have traced some of attacker's commands.. We've found some exploits under /tmp/.idc directory.. We've disconnected the server and are now testing some local kernel exploits that the attacker tried on our server. Here is our kernel version: 2.4.21-4.ELsmp #1 SMP We think that he got root access by the modified uselib() local root exploit but the exploit doesn't work! loki@danaria {/tmp}# ./mail -l ./lib [+] SLAB cleanup child 1 VMAs 32768 The exploit hangs like this.. I've waited over 5 minutes but nothing has happened. I've also tried other exploits but they didn't work.. Any ideas? or experimentations with this exploit? Because we need to find the issue and patch our kernel but we can't understand how he used this exploit to get root... Thanks

  Read the article

• How to discern video details from Linux Live CD

  - by Chris Lieb

  I was having trouble getting X.Org to work with the video card in a recently aquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?

  Read the article

• Meaning of tcp_delack_min

  - by Phi

  Hi, the current Linux Kernel (e.g. 2.6.36) uses Delayed Acknowledgments (delack). In /include/net/tcp.h it says: define TCP_DELACK_MIN ((unsigned)(HZ/25)) So, for a Kernel using a HZ value of 1000, an ACK should be delayed by a minimum of 40 ms. However, RFC 2581 says a TCP implementation should acknowledge every second full sized segment without further delay. Does anybody know whether the Linux Kernel follows that 'should' or whether the TCP_DELACK_MIN value means that even after a full sized segment was received, the ACK continues to be delayed until 40 ms have passed?

  Read the article

• MacBook Pro Late 2009 SATA Resets, Slowness

  - by A Student at a University

  My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. The resets correlate with AC power connects and disconnects. I don't know if the warnings do. (How do I tell?) Are these bus CRC errors? Or something else? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16 :[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16 :[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16 :[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16 :[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16 :[ 0.813473] scsi0 : ahci 02:37:16 :[ 0.823340] scsi1 : ahci 02:37:16 :[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16 :[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16 :[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16 :[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16 :[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16 :[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16 :[ 1.229570] ata2.00: configured for UDMA/133 02:37:16 :[ 1.240133] ata2: hard resetting link 02:37:16 :[ 1.260738] ata1.00: configured for UDMA/133 02:37:16 :[ 1.280122] ata1: hard resetting link 02:37:16 :[ 1.470125] usb 2-5: new high speed USB device using ehci_hcd and address 3 02:37:16 :[ 1.550165] firewire_core: created device fw0: GUID 58b035fffea99f5c, S800 02:37:16 :[ 1.631306] Initializing USB Mass Storage driver... 02:37:16 :[ 1.631392] scsi6 : usb-storage 2-5:1.0 02:37:16 :[ 1.631454] usbcore: registered new interface driver usb-storage 02:37:16 :[ 1.631455] USB Mass Storage support registered. 02:37:16 :[ 1.960128] usb 4-1: new full speed USB device using ohci_hcd and address 2 02:37:16 :[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 1.994215] ata2.00: configured for UDMA/133 02:37:16 :[ 1.994220] ata2: EH complete 02:37:16 :[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16 :[ 2.090773] ata1.00: configured for UDMA/133 02:37:16 :[ 2.090778] ata1: EH complete 02:37:16 :[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16 :[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16 :[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16 :[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16 :[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16 :[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16 :[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16 :[ 2.091337] sda: 02:37:16 :[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16 :[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16 :[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16 :[ 2.091756] sdb: sda1 sda2 02:37:16 :[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16 :[ 2.093505] sdb1 sdb2 sdb3 02:37:16 :[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16 :[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16 :[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16 :[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25 :[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25 :[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25 :[ 19.641533] ata1: hard resetting link 02:37:25 :[ 19.642084] ata2: hard resetting link 02:37:26 :[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26 :[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26 :[ 20.396697] ata2.00: configured for UDMA/133 02:37:26 :[ 20.396703] ata2: EH complete 02:37:26 :[ 20.451491] ata1.00: configured for UDMA/133 02:37:26 :[ 20.451498] ata1: EH complete 02:37:30 :[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30 :[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30 :[ 24.627246] ata1: hard resetting link 02:37:30 :[ 24.632250] ata2: hard resetting link 02:37:31 :[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31 :[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31 :[ 25.386782] ata2.00: configured for UDMA/133 02:37:31 :[ 25.386788] ata2: EH complete 02:37:31 :[ 25.431668] ata1.00: configured for UDMA/133 02:37:31 :[ 25.431674] ata1: EH complete 02:45:54 :[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55 :[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55 :[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55 :[ 529.622583] ata1: hard resetting link 02:45:55 :[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55 :[ 529.622624] ata2: hard resetting link 02:45:56 :[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56 :[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56 :[ 530.384305] ata2.00: configured for UDMA/133 02:45:56 :[ 530.384314] ata2: EH complete 02:45:56 :[ 530.399225] ata1.00: configured for UDMA/133 02:45:56 :[ 530.399233] ata1: EH complete 02:45:58 :[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58 :[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58 :[ 532.590983] ata1: hard resetting link 02:45:58 :[ 532.591045] ata2: hard resetting link 02:45:59 :[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59 :[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59 :[ 533.344416] ata2.00: configured for UDMA/133 02:45:59 :[ 533.344424] ata2: EH complete 02:45:59 :[ 533.360839] ata1.00: configured for UDMA/133 02:45:59 :[ 533.360847] ata1: EH complete 02:45:59 :[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59 :[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59 :[ 533.660132] ata2: hard resetting link 02:45:59 :[ 533.660151] ata1: hard resetting link 02:46:00 :[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00 :[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00 :[ 534.416768] ata2.00: configured for UDMA/133 02:46:00 :[ 534.416777] ata2: EH complete 02:46:00 :[ 534.431396] ata1.00: configured for UDMA/133 02:46:00 :[ 534.431401] ata1: EH complete 02:46:03 :[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03 :[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03 :[ 537.586002] ata1: hard resetting link 02:46:03 :[ 537.586036] ata2: hard resetting link 02:46:04 :[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04 :[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04 :[ 538.334389] ata2.00: configured for UDMA/133 02:46:04 :[ 538.334398] ata2: EH complete 02:46:04 :[ 538.343511] ata1.00: configured for UDMA/133 02:46:04 :[ 538.343519] ata1: EH complete 02:46:04 :[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04 :[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04 :[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04 :[ 538.540159] ata1: hard resetting link 02:46:04 :[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04 :[ 538.540220] ata2: hard resetting link 02:46:05 :[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05 :[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05 :[ 539.294100] ata2.00: configured for UDMA/100 02:46:05 :[ 539.294106] ata2: EH complete 02:46:05 :[ 539.314125] ata1.00: configured for UDMA/100 02:46:05 :[ 539.314132] ------------[ cut here ]------------ 02:46:05 :[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05 :[ 539.314144] Hardware name: MacBookPro5,3 02:46:05 :[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05 :[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05 :[ 539.314224] Call Trace: 02:46:05 :[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05 :[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05 :[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05 :[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05 :[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05 :[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05 :[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05 :[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05 :[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05 :[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05 :[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05 :[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05 :[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05 :[ 539.314296] ata1: EH complete 02:46:12 :[ 547.040117] ata1: hard resetting link 02:46:13 :[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13 :[ 547.408430] ata1.00: configured for UDMA/100 02:46:13 :[ 547.408438] ------------[ cut here ]------------ 02:46:13 :[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13 :[ 547.408451] Hardware name: MacBookPro5,3 02:46:13 :[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13 :[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13 :[ 547.408531] Call Trace: 02:46:13 :[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13 :[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13 :[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13 :[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13 :[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13 :[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13 :[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13 :[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13 :[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13 :[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13 :[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13 :[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13 :[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13 :[ 547.408620] ata1: EH complete 02:46:13 :[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13 :[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13 :[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13 :[ 547.738218] ata1: hard resetting link 02:46:13 :[ 547.738274] ata2: hard resetting link 02:46:14 :[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14 :[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14 :[ 548.486809] ata2.00: configured for UDMA/100 02:46:14 :[ 548.486818] ata2: EH complete 02:46:14 :[ 548.498998] ata1.00: configured for UDMA/33 02:46:14 :[ 548.499004] ata1: EH complete 02:46:18 :[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18 :[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18 :[ 552.529684] ata1: hard resetting link 02:46:18 :[ 552.529723] ata2: hard resetting link 02:46:19 :[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19 :[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19 :[ 553.284141] ata2.00: configured for UDMA/100 02:46:19 :[ 553.284150] ata2: EH complete 02:46:19 :[ 553.301629] ata1.00: configured for UDMA/33 02:46:19 :[ 553.301637] ata1: EH complete 02:46:21 :[ 556.078830] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:21 :[ 556.180361] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:22 :[ 556.262612] ata1: hard resetting link 02:46:22 :[ 556.262617] ata2: hard resetting link 02:46:22 :[ 557.010050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:22 :[ 557.010070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:22 :[ 557.014069] ata2.00: configured for UDMA/100 02:46:22 :[ 557.014075] ata2: EH complete 02:46:22 :[ 557.023646] ata1.00: configured for UDMA/33 02:46:22 :[ 557.023654] ata1: EH complete 02:46:30 :[ 565.047438] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:30 :[ 565.051554] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:30 :[ 565.108332] ata1: hard resetting link 02:46:30 :[ 565.108389] ata2.00: limiting speed to UDMA/33:PIO4 02:46:30 :[ 565.108406] ata2: hard resetting link 02:46:31 :[ 565.850048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:31 :[ 565.850068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:31 :[ 565.854304] ata2.00: configured for UDMA/33 02:46:31 :[ 565.854313] ata2: EH complete 02:46:31 :[ 565.868477] ata1.00: configured for UDMA/33 02:46:31 :[ 565.868485] ata1: EH complete 02:46:35 :[ 569.265469] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:35 :[ 569.268139] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:35 :[ 569.340079] ata1: hard resetting link 02:46:35 :[ 569.340113] ata2: hard resetting link 02:46:35 :[ 570.092568] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:35 :[ 570.092589] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:35 :[ 570.096828] ata2.00: configured for UDMA/33 02:46:35 :[ 570.096837] ata2: EH complete 02:46:35 :[ 570.110727] ata1.00: configured for UDMA/33 02:46:35 :[ 570.110735] ata1: EH complete 02:47:04 :[ 598.528232] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:47:04 :[ 598.653973] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:47:04 :[ 598.730854] ata1: hard resetting link 02:47:04 :[ 598.730910] ata2: hard resetting link 02:47:05 :[ 599.480136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:47:05 :[ 599.480159] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:47:05 :[ 599.484206] ata2.00: configured for UDMA/33 02:47:05 :[ 599.484213] ata2: EH complete 02:47:05 :[ 599.496699] ata1.00: configured for UDMA/33 02:47:05 :[ 599.496707] ata1: EH complete 04:45:59 :[ 7733.756548] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 04:45:59 :[ 7733.882748] EXT4-fs (dm-2): re-mounted. Opts: commit=0 04:45:59 :[ 7733.960142] ata1: hard resetting link 04:45:59 :[ 7733.960189] ata2: hard resetting link 04:46:00 :[ 7734.701926] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 04:46:00 :[ 7734.719939] ata1.00: configured for UDMA/33 04:46:00 :[ 7734.719946] ata1: EH complete 04:46:00 :[ 7734.722547] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 04:46:00 :[ 7734.726652] ata2.00: configured for UDMA/33 04:46:00 :[ 7734.726659] ata2: EH complete 04:46:02 :[ 7736.656465] ACPI: EC: GPE storm detected, transactions will use polling mode 13:38:49 :[39704.188621] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 13:38:49 :[39704.280588] EXT4-fs (dm-2): re-mounted. Opts: commit=600 13:38:49 :[39704.360819] ata1: hard resetting link 13:38:49 :[39704.360882] ata2: hard resetting link 13:38:50 :[39705.112956] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 13:38:50 :[39705.114435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 13:38:50 :[39705.118673] ata2.00: configured for UDMA/33 13:38:50 :[39705.118682] ata2: EH complete 13:38:50 :[39705.127076] ata1.00: configured for UDMA/33 13:38:50 :[39705.127084] ata1: EH complete 13:39:49 :[39764.142463] applesmc: F1Mn: write arg fail 13:48:11 :[40267.025145] applesmc: FS! : read arg fail 13:52:53 :[40548.596735] applesmc: FS! : read arg fail 13:53:58 :[40613.972856] applesmc: FS! : read arg fail 13:54:08 :[40624.057339] applesmc: FS! : read arg fail 13:58:20 :[40875.397749] applesmc: TC0D: read data fail 14:16:56 :[41991.722054] applesmc: Th2H: read data fail 14:22:32 :[42327.991522] applesmc: light sensor data length set to 10 14:26:19 :[42554.788886] applesmc: F1Mn: write arg fail 14:32:36 :[42931.860443] applesmc: TC0F: read data fail 14:34:32 :[43048.041469] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 14:34:33 :[43048.185850] EXT4-fs (dm-2): re-mounted. Opts: commit=0 14:34:33 :[43048.270184] ata1: hard resetting link 14:34:33 :[43048.270224] ata2: hard resetting link 14:34:33 :[43049.030049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:33 :[43049.030065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:33 :[43049.034106] ata2.00: configured for UDMA/33 14:34:33 :[43049.034112] ata2: EH complete 14:34:33 :[43049.056952] ata1.00: configured for UDMA/33 14:34:33 :[43049.056959] ------------[ cut here ]------------ 14:34:33 :[43049.056968] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 14:34:33 :[43049.056971] Hardware name: MacBookPro5,3 14:34:33 :[43049.056973] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 14:34:33 :[43049.057048] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 14:34:33 :[43049.057052] Call Trace: 14:34:33 :[43049.057060] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 14:34:33 :[43049.057064] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 14:34:33 :[43049.057069] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 14:34:33 :[43049.057074] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 14:34:33 :[43049.057083] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 14:34:33 :[43049.057088] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 14:34:33 :[43049.057093] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 14:34:33 :[43049.057097] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 14:34:33 :[43049.057102] [<ffffffff8107f266>] kthread+0x96/0xa0 14:34:33 :[43049.057107] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 14:34:33 :[43049.057111] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 14:34:33 :[43049.057115] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 14:34:33 :[43049.057118] ---[ end trace 76dbffc2d5d49d9d ]--- 14:34:33 :[43049.057123] ata1: EH complete 14:34:41 :[43057.012698] ata1: hard resetting link 14:34:42 :[43057.362780] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:42 :[43057.381432] ata1.00: configured for UDMA/33 14:34:42 :[43057.381441] ------------[ cut here ]------------ 14:34:42 :[43057.381450] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 14:34:42 :[43057.381453] Hardware name: MacBookPro5,3 14:34:42 :[43057.381455] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 14:34:42 :[43057.381530] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 14:34:42 :[43057.381533] Call Trace: 14:34:42 :[43057.381542] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 14:34:42 :[43057.381546] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 14:34:42 :[43057.381551] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 14:34:42 :[43057.381556] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 14:34:42 :[43057.381565] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 14:34:42 :[43057.381569] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 14:34:42 :[43057.381575] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 14:34:42 :[43057.381579] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 14:34:42 :[43057.381584] [<ffffffff8107f266>] kthread+0x96/0xa0 14:34:42 :[43057.381589] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 14:34:42 :[43057.381594] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 14:34:42 :[43057.381598] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 14:34:42 :[43057.381601] ---[ end trace 76dbffc2d5d49d9e ]--- 14:34:42 :[43057.381624] ata1: EH complete 14:34:42 :[43057.557887] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 14:34:42 :[43057.560517] EXT4-fs (dm-2): re-mounted. Opts: commit=600 14:34:42 :[43057.621194] ata1: hard resetting link 14:34:42 :[43057.621252] ata2: hard resetting link 14:34:43 :[43058.370141] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:43 :[43058.370162] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:43 :[43058.374407] ata2.00: configured for UDMA/33 14:34:43 :[43058.374415] ata2: EH complete 14:34:43 :[43058.381989] ata1.00: configured for UDMA/33 14:34:43 :[43058.381996] ata1: EH complete 14:34:43 :[43058.616228] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 14:34:43 :[43058.618931] EXT4-fs (dm-2): re-mounted. Opts: commit=600 14:34:43 :[43058.626687] ata1: hard resetting link 14:34:43 :[43058.626731] ata2: hard resetting link 14:34:44 :[43059.372908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:44 :[43059.372932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 14:34:44 :[43059.376997] ata2.00: configured for UDMA/33 14:34:44 :[43059.377003] ata2: EH complete 14:34:44 :[43059.392576] ata1.00: configured for UDMA/33 14:34:44 :[43059.392585] ata1: EH complete 15:48:19 :[47474.710860] ata1: hard resetting link 15:48:19 :[47474.710882] ata2: hard resetting link 15:48:20 :[47475.460144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 15:48:20 :[47475.460169] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 15:48:20 :[47475.473709] ata1.00: configured for UDMA/33 15:48:20 :[47475.473717] ata1: EH complete 15:48:20 :[47475.727960] ata2.00: configured for UDMA/33 15:48:20 :[47475.727969] ata2: EH complete 16:29:39 :[49954.295017] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 16:29:39 :[49954.622307] EXT4-fs (dm-2): re-mounted. Opts: commit=0 16:29:39 :[49954.710139] ata1: hard resetting link 16:29:39 :[49954.710174] ata2: hard resetting link 16:29:40 :[49955.460046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 16:29:40 :[49955.460062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 16:29:40 :[49955.464138] ata2.00: configured for UDMA/33 16:29:40 :[49955.464144] ata2: EH complete 16:29:40 :[49955.473251] ata1.00: configured for UDMA/33 16:29:40 :[49955.473258] ata1: EH complete

  Read the article

• Compiling linux kernel, how much size is needed?

  - by ant2009

  Hello, I am have downloaded the newest most stable linux kernel 2.6.33.2 I thought I would test this using virtualbox. So I create a dynamically sized harddisk of 4gb. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4gb, but the actual size is 3.5gb $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a linux kernel? Is there any guidelines to follow when doing this? This is my first time, so just experimenting with this. Many thanks,

  Read the article

• Don't panic - there is time!

  - by ripper234

  If you're thinking of moving to Shapado right this instance, take a breath. Yes, I think it's the right move in the long run (be it three months or a year). However, take into consideration that the platform is still not ready. It has bugs and feature-requests that should be fixed. Until they are, you are better off staying with Stack Exchange as long as you can. Of course, it is in your best interest to participate heavily in the 'meta discussion' that takes place at Shapado.com and vote on the features and bug fixes that you want.

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >