Search Results

Search found 4619 results on 185 pages for 'kernel panic'.

Page 37/185 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• How do I get my Broadcom BCM4313 working correctly?

  - by Ataraxio Panzetta

  I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• How to prevent system to generate log file

  - by shantanu

  My Question is little bit surprising, but i need it. I am using a slow processor laptop, now i found that HDD has some bad sectors and HDD response becomes slow. But disk health is ok(according to smart tools). I can not change my HDD right now. So decide to reduce disk operation. How do i prevent system to generate log file or any other file which are used to keep history? I know LOG file is very important but i don't care it right now. Please help.

  Read the article

• How can I limit the number of open AF_INET sockets?

  - by Stefano Palazzo

  Is there a way to limit the number of concurretly open AF_INET sockets (only)? If so, how do I do it, and how will the networking behave if I'm above the limit? For background: My cheap commodity router is a bit eager to detect 'syn flooding'. When it does, it crashes (and doesn't automatically restart itself). I'm thinking limiting concurrent connections to around 1000 should keep it from bickering.

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

• How do I install penmountlpc?

  - by ændrük

  I would like to install the penmountlpc touchscreen driver in Ubuntu 11.10 on a Dialogue Flybook A33i. When I try installing it from the source packed in penmountlpc-source_1.1_all.deb, I receive the following build error (see also the full build log): # Install the module cp penmountlpc.o debian/penmountlpc-modules-3.0.0-12-generic/lib/modules/3.0.0-12-generic/misc cp: cannot create regular file `debian/penmountlpc-modules-3.0.0-12-generic/lib/modules/3.0.0-12-generic/misc': No such file or directory make[1]: *** [binary-modules] Error 1 make[1]: Leaving directory `/usr/src/modules/penmountlpc' make: *** [kdist_build] Error 2 How can I resolve this problem?

  Read the article

• Change default display of the Ubuntu screen

  - by r15

  Currently I am working on a customize device which has Ubuntu 12.10. Now I have to restructure the screen of that device. I have added sample design of the screen. We are getting this screen when we start the device. How can I achive this. I know for this I have make changes in many configuration files of ubuntu. But I don't know how to start and in which files I have to make changes. So that I need some guidelines for this? and we are using lightdm as display manager. Feel free to ask me any question and sorry for bad english.

  Read the article

• Why does 12.04 try but fail to hibernate, even after I enabled hibernation?

  - by Roger Davis

  Regarding the below (-----) info from another post, my system will try (as is said below) to hibernate, but it won't get all the way there. Hard drive activity stops, but it does not shut down. If I turn the power off, then back on, it will start, but I have to "restore previous session" in the browser and other open apps don't restart, with the accompanying hassle. So because it tries, will the suggested fix then cause it to work correctly, or is the literal "try" not really what he means?!? PLEASE NOTE - this is a desktop system, not a laptop. Before enabling hibernation, please try to test whether it works correctly by running pm-hibernate in a terminal. The system will try to hibernate. If you are able to start the system again then you are more or less safe to add an override. To do so, start editing sudo nano /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla Fill it with this [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Save by pressing Ctrl-O and exit nano by pressing Ctrl-X Restart and hibernation is back!

  Read the article

• Ubuntu 12.10 not properply working on Asus u46E after Update

  - by John Oakland

  I recently installed the latest Ubuntu update on my laptop and since then, the alignment on the browser is messed up, the mouse is not working, and I can't connect to the internet. Before it was working perfectly. Any ideas on what to do? Thanks for any feedback FYI: I am right now using windows since I have both linux and windows on my laptop. Also, when booting I do have the option to boot previous ubuntu versions, when I boot the previous unbuntu version on my laptop, everything works accept except the internet. (the mouse works, alignment is proper)

  Read the article

• Are the Ralink RT3090 drivers incompatible with Ubuntu 10.10?

  - by xd1936

  Ralink Technology publishes their drivers in source code form on their website here. When complied with make and make install in 10.04, the drivers worked well in 32 and 64 bit versions of Lucid. However, when compiled for the 64 bit version of Maverick, it does not work at all, and 32 bit Maverick, it works but randomly disconnects. Both versions of Maverick say "[Proprietary] Driver is activated but not in use" in the Proprietary Drivers dialog. Do the drivers just need to be updated? Is there an easy fix?

  Read the article

• How to reduce fan noise with some latest Dell laptops, Desktop PC's?

  - by YumYumYum

  I have a few new Dell laptops and desktop PC's. Some of them have extremely noisy fans. The technicians who are sent by Dell refuse to attempt to fix things when they see that the OS is Ubuntu. They seem to be comfortable dealing with machines running MS Windows. For Linux, is there any way to slow or lower the fan speed? Please can anyone advise how it should be done. I have tried lm_sensors but failed.

  Read the article

• haw to install libenca.so.0 in SUSE Linux (release 11Kernel linux 2.6.32.59-0.7-pae)gnome 2.28.2 [closed]

  - by Zeljko

  I haw problem with Mplayer. When I try to watch mouvie i got error code: /usr/bin/mplayer -noquiet -nofs -nomouseinput -vc coreserve, -sub-fuzziness 1 -identify -slave -vo xv, -ao alsa, -nokeepaspect -framedrop -dr -double -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 31457623 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/adria/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp ISO-8859-1 -subpos 100 -nocache -osdlevel 0 -vf-add eq2,hue -vf-add screenshot -slices -channels 2 -af equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 110 /home/adria/Resident Evil - Retribution 2012 R5 DVDRiP XviD AC3 - BHRG/Resident Evil - Retribution 2012 R5 DVDRiP XviD AC3 - BHRG.avi /usr/bin/mplayer: error while loading shared libraries: libenca.so.0: cannot open shared object file: No such file or directory help please

  Read the article

• File system with chained clusters

  - by Maki Maki

  I'm trying to create school file system with partitions on disks, every partition has its cluster for her representation. typedef unsigned long ClusterNo; const unsigned long ClusterSize = 2048; int x, y ;//x ,y are entries for two-chained lists of clusters if (endOfFile<maxsize// { ... { pointer = KernelFS::searchFreeCluster(partitionPointer->letter) " How can I initialize the beginning for two clusters, their pointers to be 32 bits?

  Read the article

• Questionable ethics regarding closed source softwares which are supposed to be open source.

  - by edem

  Several days ago I heard a sentence "Cracking company name routers are not a crime.". I asked "Why?" and the guy explained to me that company name used a linux distribution on their routers which source can not be closed because of their license but company name closed it. What do you think about this? Doing otherwise unethical "cracking" becomes ethical, or somewhat neutral if the software in question is "cracked" too? By "cracking" I don't mean breaking into a computer through someones' company name router but "cracking" my own router's OS which otherwise would be unethical.

  Read the article

• What's the difference or purpose of a file format like ELF when flat binaries take up less space and can do the same thing?

  - by Sinister Clock

  I will give a better description now. In Linux driver development you need to follow a specification using an ELF file format as a finalized executable, i.e., that right there is not flat, it has headers, entry fields, and is basically carrying more weight than just a flat binary with opcodes. What is the purpose or in-depth difference of a Linux ELF file for a driver to interact with the video hardware, and, say, a bare, flat x86 16-bit binary I write that makes use of emulated graphics mode on a graphics card and writes to memory(besides the fact that the Linux driver probably is specific to making full use of the hardware and not just the emulated, backwards compatible memory accessing scheme). To sum it up, what is a difference or purpose of a binary like ELF with different headers and settings and just a flat binary with the necessary opcodes/instructions/data to do the same thing, just without any specific format? Example: Windows uses PE, Mac uses Mach-O/PEF, Linux uses ELF/FATELF, Unix uses COFF. What do any of them really mean or designate if you can just go flat, especially with a device driver which is system software.

  Read the article

• Can't install ubuntu 12.04 64 bit and 32 bit

  - by Mark

  I downloaded The Ubuntu 12.04 64 bit, i burned it from a cd and when I tried to install it i only and get a black screen and saying Peter Arvin et al could not find kermel image I thought there's a problem with the file so i downloaded it again and install it then i always get the same message. I tried also 32 bit and i always get the same error. I tried also installing it from a usb and i always get the same. So i just downloaded the WUBI and works so fine to my computer. I'm using Sony Vaio E Series with a 32 bit system and 500 GB hard Disk Drive.

  Read the article

• frequent abnormal shutdowns/system crashes

  - by user110353

  It's been almost 5 days since I have installed Ubuntu and almost 6th time that my laptop has been crashed entirely and it shuts down abnormally. Actually, it heats up and I have to wait for 20 odd minutes before I can turn it on again. A message appears that my PC crashed due to overheating which may damage my hard disk. The crashes happened when I tried to open some application that freeze my PC not even giving me enough time to go to system monitor and end process. Sometimes the culprit application which caused crash is Ever-pad, sometime it's team-viewer, sometimes it's some other. This is something very serious. The last crash occurred at 09:14:40. Kindly click here to view system log. I want to stick to Ubuntu and the same laptop as I had serious issues with Windows and I nearly went out to dump my laptop and purchase a more powerful system. Below are my hw/os specs. Kindly advice on how to resolve this issue Ubuntu 12.10 Kernal 3.5.0-18-generic GNOME 3.6.0 Memory 2.0GB Processor: Genuine Intel CPU [email protected] x 2 Available Disk Space: 63.7 GB Thanks in advance

  Read the article

• How do I make Ubuntu go past the splash screen?

  - by John Baber

  I recently upgraded my desktop mac to Precise and now can't get past the Ubuntu 12.04 splash page. The splash freezes with ubntu and the dots turning from white to orange forever. This is when I choose 3.2.0-generic from the grub menu. If I choose to load up older kernels, I still get the same thing. How can I make my computer finish booting again? I'm able to ssh into the machine and poke around, but the actual screen freezes at the splash. dmesg cat kern.log

  Read the article

• Oneiric is freezing. Need help diagnosing and filing a bug

  - by mlissner

  Six months ago, I bought a new Sandy Bridge CPU and built myself a nice desktop machine. Until now it hasn't worked...at all. I finally have gotten it working now that Oneiric is released, but it freezes every so often, making it little more than a semi-functional temptation. What happens when the system freezes is: the music I have playing enters into about 5s loops. SSH fails the monitor freezes the mouse freezes the keyboard fails The only way to fix it is to do a hard reset...and that sucks. I'd love to at least figure out the source of the freeze so I can file a bug. I've looked in dmesg, kern.log, and the X.org logs. Nothing interesting is any of them. Since SSH fails, I'm convinced it's not an X crash: https://wiki.ubuntu.com/X/Troubleshooting/Freeze Anything else I can do?

  Read the article

• cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

  - by Carlos Dunick

  Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

  Read the article

• 11.10 - Update Manager Not working

  - by Mattlinux1

  W:Failed to fetch cdrom://Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)/dists/oneiric/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)/dists/oneiric/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead. This happens when i hit the check button? and the updates were working before.

  Read the article

• Can I copy large files faster without using the file cache?

  - by Veazer

  After adding the preload package, my applications seem to speed up but if I copy a large file, the file cache grows by more than double the size of the file. By transferring a single 3-4 GB virtualbox image or video file to an external drive, this huge cache seems to remove all the preloaded applications from memory, leading to increased load times and general performance drops. Is there a way to copy large, multi-gigabyte files without caching them (i.e. bypassing the file cache)? Or a way to whitelist or blacklist specific folders from being cached?

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• Touchpad and Keyboard both stop working after long uptime

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• Why was Tanenbaum wrong in the Tanenbaum-Torvalds debates?

  - by Robz

  I was recently assigned reading from the Tanenbaum-Torvalds debates in my OS class. In the debates, Tanenbaum makes some predictions: Microkernels are the future x86 will die out and RISC architectures will dominate the market (5 years from then) everyone will be running a free GNU OS I was a one year old when the debates happened, so I lack historical intuition. Why have these predictions not panned out? It seems to me, that from Tanenbaum's perspective, they're pretty reasonable predictions of the future. What happened so that they didn't come to pass?

  Read the article

• How can I set up a regex to rename files automatically for Atftp?

  - by CE-SA

  I've a question about the package named 'atftp'. I've got the atftp daemon finally working. Previously I was using tftp-hpa with a custom rule that replaces filenames with capitals into non-capital filenames and replaces the backslashes into forward slashes so that WinPE will boot fine. But in atftp I can't find rules or replacements like that. I'm searching for long, but cannot find or write the right pcre-pattern. Could you help me with this?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >