Search Results

Search found 1121 results on 45 pages for 'mobility radeon'.

Page 35/45 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• GLSL compile error when accessing an array with compile-time constant index

  - by Benlitz

  I have this shader that works well on my computer (using an ATI HD 5700). I have a loop iterating between two constant values, which is, afaik, acceptable in a glsl shader. I write stuff in two arrays in this loop. #define NB_POINT_LIGHT 2 ... varying vec3 vVertToLight[NB_POINT_LIGHT]; varying vec3 vVertToLightWS[NB_POINT_LIGHT]; ... void main() { ... for (int i = 0; i < NB_POINT_LIGHT; ++i) { if (bPointLightUse[i]) { vVertToLight[i] = ConvertToTangentSpace(ShPointLightData[i].Position - WorldPos.xyz); vVertToLightWS[i] = ShPointLightData[i].Position - WorldPos.xyz; } } ... } I tried my program on another computer equipped with an nVidia GTX 560 Ti, and it fails to compile my shader. I get the following errors (94 and 95 are the lines of the two affectations) when calling glLinkProgram: Vertex info ----------- 0(94) : error C5025: lvalue in assignment too complex 0(95) : error C5025: lvalue in assignment too complex I think my code is valid, I don't know if this comes from a compiler bug, a conversion of my shader to another format from the compiler (nvidia looks to convert it to CG), or if I just missed something. I already tried to remove the if (bPointLightUse[i]) statement and I still have the same error. However, if I just write this: vVertToLight[0] = ConvertToTangentSpace(ShPointLightData[0].Position - WorldPos.xyz); vVertToLightWS[0] = ShPointLightData[0].Position - WorldPos.xyz; vVertToLight[1] = ConvertToTangentSpace(ShPointLightData[1].Position - WorldPos.xyz); vVertToLightWS[1] = ShPointLightData[1].Position - WorldPos.xyz; Then I don't have the error anymore, but it's really unconvenient so I would prefer to keep something loop-based. Here is the more detailled config that works: Vendor: ATI Technologies Inc. Renderer: ATI Radeon HD 5700 Series Version: 4.1.10750 Compatibility Profile Context Shading Language version: 4.10 And here is the more detailed config that doesn't work (should also be compatibility profile, although not indicated): Vendor: NVIDIA Corporation Renderer: GeForce GTX 560 Ti/PCI/SSE2 Version: 4.1.0 Shading Language version: 4.10 NVIDIA via Cg compiler

  Read the article

• Unable to suspend with FGLRX enabled

  - by schmmd

  I am unable to suspend in a fully updated (as of yesterday, 29 March 2011) Ubuntu 10.10 installation (kernel 2.6.35-28). Following is a list of some of my hardware: Motherboard: Gigabyte GA-X58A-UD3R Video: Radeon HD-567X-YNF3 Initially, when I went to either Suspend or Hibernate the machine would almost go into suspend, but it would never power down. Instead it would bounce back to the login screen. This was due to a problem with the USB3 ports being unable to suspend (noticed this in /var/log/kern.log). Disabling the USB3 ports in the BIOS fixed this issue. Now Suspend and Hibernate power down the machine. It successfully awakens from Hibernate. However, it will not return from suspend. The mouse and keyboard are not powered and the monitor has no signal. These devices are still not powered after a restart. I must power-cycle the machine. The pm-suspend log ends after it states that it entered suspend (i.e. there is no information any resume code running). I discovered that acpitool -s suspends the machine and resumes successfully exactly once. The second time the machine will not resume. I am not sure how these two tools handle suspend differently. UPDATE: the problem was introduced somewhere between 2.6.35-22 and 2.6.35-28. I have both kernels install presently. Suspend works fine with 2.6.35-22 but not with 2.6.38-28.

  Read the article

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• Laptop choice for development: MacBook Pro 17 vs Dell Studio XPS 16 vs HP Envy 15

  - by Shalan

  Hey! First things first - let me state that I am not intending to play games on this - I have narrowed down to these 3 purely based on specs and its individual brand reliability in the market. I intend to primarily use: Visual Studio 2008 Pro a lot (develop and deploy on Windows platforms) SQL Server 2005 Oracle 10g Adobe Photoshop CS4 Microsoft Expression Studio Google Sketchup I currently use a desktop PC (Core2Duo 2.66Ghz with 3GB DDRII memory) running Vista Business 32-bit - and I have to admit that, especially for Visual Studio, its quite sluggish to a point where it affects productivity. Furthermore, I intend to only use the notebook on a table - with a cooled surface, like granite :) - so I would appreciate people's input with regard to heat issues. Im aware that the Dell's primary exhaust gets blocked by the lid when open, but some reviews don't seem to place extraordinary emphasis on heat issues resulting from this. My options for the Dell/Alienware: Core i7 720QM 4GB DDRIII memory ATI mobility 3670 (512) 128GB Solid State Drive 16-inch Full HD RGB-LED LCD display (1080p) 3-year next-business-day support My configuration for the Apple MBP: Core2Duo 2.8Ghz (Im assuming the T9600) 4GB DDRIII memory 128GB Solid State Drive standard 1 year support The one advantage I think of with the MBP is that I can have the addition of OSX (though Im unsure what I would use it for, but purely to play around with a much-boasted-about OS) What are your thoughts on this, especially regarding build-quality, heat, performance and battery-life? Much thanks! ~shalan

  Read the article

• How can I fix apt-get autoremove wanting to uninstall most of my packages?

  - by Stefano

  I did change my packages in synaptic from manually installed to Automatically (they were not manually installed but automatically). Now they are marked for Autoremove. I tested it with sudo apt-get autoremove and the result is shown below (a reduced version because its almost all packages). I remember last year I had same issue and solved it via Ubuntu forums but the forum is down and I cannot reach the post! Anyone has any idea how to fix this? sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: unity-asset-pool unity-greeter unity-lens-applications unity-lens-files unity-lens-music unity-lens-photos unity-lens-video unity-scope-gdrive unity-scope-musicstores unity-scope-video-remote unity-services unity-tweak-tool unity-webapps-amazoncloudreader unity-webapps-common unity-webapps-facebookmessenger unity-webapps-gmail unity-webapps-googledocs unity-webapps-googleplus unity-webapps-launchpad unity-webapps-linkedi xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga xserver-xorg-video-modesetting xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon xserver-xorg-video-s3 xserver-xorg-video-savage xserver-xorg-video-siliconmotion xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident xserver-xorg-video-vesa xserver-xorg-video-vmware xul-ext-unity xul-ext-webaccounts xul-ext-websites-integration y-ppa-manager yad zenity zenity-common zip 0 upgraded, 0 newly installed, 1440 to remove and 0 not upgraded. After this operation, 3,853 MB disk space will be freed. Do you want to continue [Y/n]?

  Read the article

• Java crashes on lubuntu but not Ubuntu

  - by Echogene

  I have lubuntu and Ubuntu partitions on my drive. I've been having an interesting time with the new lubuntu partition. I've encountered strange things with the game Minecraft, Java and graphics drivers on the lubuntu partition. Firstly, I'll say that Minecraft runs fine at about 60fps on the Ubuntu partition with the latest drivers. (This is lower than it should be as it's a pretty decent graphics card [Radeon HD 5700].) When I first started lubuntu, I tried to see if I could get Minecraft running on Java. Java crashed when loading the main game graphics on both Sun and OpenJDK without proprietary drivers. Java also crashed on both Javas with proprietary drivers after the necessary restart. However, after disabling (with 'remove' button) the proprietary drivers with jockey-gtk in the session after the restart to install the drivers, Minecraft ran very well at ~120fps. This didn't continue after another restart, when it ran at 9fps. After failing thereafter on lubuntu to get it working at 15fps, I tried reinstalling lubuntu and installed the exact same driver (the latest one, not the one appearing on jockey) and Java versions as on Ubuntu. That is, now Ubuntu and lubuntu have the same graphics driver and Java version. Minecraft still crashes in the same way on lubuntu but works fine on Ubuntu. I would appreciate any explanation for any of these events. What differences between lubuntu and Ubuntu could cause this? Edit: After installing the 32bit driver version on lubuntu (seeing as lubuntu is 32bit), I have Java "working" for Minecraft. However, it is at <15fps again and it can't log in to servers as it takes too long.

  Read the article

• The ship "shudders" in scrolling Asteroids

  - by Ciaran

  In my Asteroids game the user can scroll through space. When scrolling, the ship is drawn in the centre of the window. I use interpolation. I scroll the window uing glOrtho, centering it around the centre of the ship. On my first machine (7 years old, Windows XP, NVIDIA), I am doing 50 updates and 76 frames per second. This is smooth. My other machine an old compaq laptop (Pentium III) with Linux and Radeon OpenGL driver delivers 50 updates and 30 frames per second. The ship regularly seems to "shudder" back and forth when at maximum thrust. When you position the mouse cursor beside the ship it is obvious that its relative position in the window changes. Also, the stars seem blurred into short "lines". Playing the game in non-scrolling mode, the ship moves within the window, glOrtho is therefore not called repeatedly and there is no problem. I suspect a bug in my positioning of the ship and the window but I have dumped out these values and they seem to only go forward, not forward-back-forward. The driver does support double buffering. I guess if it is my bug I need to slow the frame-rate down to debug properly. My question: is this an obvious driver bug or is the slower machine uncovering a bug in my stuff and if so, some debugging tips would be appreciated. I am drawing in world co-ordinates and letting OpenGL do the scaling and translation so if I had a quick way of verifying what pixel co-ordinates OpenGL produces for the ship centre, that would help clarify this.

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• indirect rendering issue on 12.04, using ati driver

  - by lurscher

  I have ubuntu 12.04 64-bit system, when i run glxinfo i see some strange error about indirect rendering and failed to load some lib32/dri/swrast_dri libraries. Any idea what is going on? please let me know if i can enhance the relevant information provided in this question $ LIBGL_DEBUG=verbose glxinfo name of display: :0 libGL: screen 0 does not appear to be DRI2 capable libGL: OpenDriver: trying /usr/lib32/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib32/dri/swrast_dri.so libGL error: dlopen /usr/lib32/dri/swrast_dri.so failed (/usr/lib32/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL: OpenDriver: trying /usr/lib/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib/dri/swrast_dri.so libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: reverting to indirect rendering display: :0 screen: 0 direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose) server glx vendor string: ATI server glx version string: 1.4 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB, GLX_EXT_create_context_es2_profile, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event GLX version: 1.4 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 1.4 (2.1 (4.2.11762 Compatibility Profile Context)) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_framebuffer_object, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

  Read the article

• Ubuntu Studio Audio Issue with Alsa - No sound

  - by ddragon

  Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

  Read the article

• Opening and Testing Ports on Modem > Router Connection

  - by JakeTheSnake

  Working off of my last question, I can access my server's FTP over the LAN but not over the internet. I'm using Filezilla on port 666. My router/modem configuration is as such (similar to other post): 1) Modem connects to WAN 2) WAN port on modem connects to LAN port on Router 3) Modem internal IP address is 192.168.0.254 4) Router internal IP address is 192.168.0.1 5) Modem has DHCP turned OFF 6) Router has DHCP turned ON 7) Router is running Tomato firmware and it's set as 'Router' (not 'Gateway') 8) The internet is working (just had to say that) I've set up port forwarding both on the modem and router - both route port 666 to the IP address of 192.168.0.3 (TCP); that is the IP address of the server which has FileZilla running. I don't know if that's hindering anything but I've also tried it with just the modem and just the router...same result. I've also tried setting the server to be DMZ (both on router and modem). Neither router nor modem have anything in their logs about denying inbound traffic on port 666 so my ability to troubleshoot stops there. I've tried contacting my ISP (Telus, running on mobility plan...it's a "Smart" Hub) but they weren't much help. They said they only block port 25 and 80 and maybe a few others, but not most ports. I test whether or not the port is open by going to canyouseeme.org - I don't know whether or not that would produce a 'connection refused' result just based on the fact that the FTP requires a login...I'm not well versed on this matter. FWIW, sometimes I get a 'connection refused' error on canyouseeme.org but mostly it's 'connection timed out'. I don't know what else to do at this point.

  Read the article

• Laptop recommendation - Portable Gaming

  - by ivan

  So, I'm looking for a new laptop (http://superuser.com/questions/116869/toshiba-satellite-u500-totally-damaged-lcd). My requirements for a new Laptop are: -good keyboard(illuminated) and touchpad (multi-media keys included, should be better than toshiba u500) -good graphics card, with system rating of 6.3 and up for gaming graphics (my Toshiba U500 has 6.3). I used to run some heavy games on my Toshiba U500 with ATI Mobility Radeon 4570 with 512 mb VRAM but the framerates are not that nice on high settings. -Decent CPU but I think all new Core i3, i5, i7 can run most of recent resource intensive games (My Toshiba U500 has a Core 2 Duo T6500, 2.13 Ghz) I'm also looking for a long-term reliability, good sound quality, lots of fast RAM of-course(4GB DDR3 - 1066Mhz and up) and a clear looking LED screen with a decent resolution. (I can accomodate a laptop with screen size of 13-inch upto 15.6 inch, and I don't want it to be heavy because I might be taking it outdoors) I'm actually impressed when I saw HP Pavilion DV6t but the screen resolution seems to be a little too small for 15.6 inch. The Pavilion DV3 are also good but I want to know if there other options. Looking for some opinions.. Thanks. :D

  Read the article

• How can I reinstall XRandR without serious disruption to 12.04?

  - by broiyan

  This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

  Read the article

• How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

  - by beam022

  Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

  Read the article

• Sound & video problem with Toshiba Satellite L35-SP1011

  - by Diego Garcia

  I've installed Ubuntu 10.04 on a Satellite L35-SP1011 and there's no sound. Actually i have many video problems cause i had to disable effect because when it had effect activated, laptop got frozen many times. I saw this problem but in older ubuntu versions and tried some fixes without success. Any idea on how to solve my audio and video problems? I've tried these instructions https://help.ubuntu.com/community/RadeonDriver without success. My video card is a ATI Express 200M. lspci output 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] complete lspci output at http://pastebin.com/AVk1WWQt Update #1 - It's the same on Ubuntu 10.10 and Kubuntu 10.10... Slow graphics, and no sound. Update #2 - Sound SOLVED I edited /etc/modprobe/alsa-base.conf in Ubuntu 10.10 and added options snd-hda-intel model=asus Now i'm working on video, I added xorg-edgers ppa, updated and upgraded without big difference... it's working better but without transparency.

  Read the article

• Opera 10.5 RAM usage and Google Reader?

  - by David

  Hi all, Today I upgraded to Opera 10.5 from Google Chrome and I have two really important questions about it. 1) Is it normal for it to use SO MUCH RAM!!!!? Closing tabs doesn't help, but opening new ones add on to the usage. I can have just 4 tabs open and it goes up to the 300MB mark and I only have 1.5GB in my laptop, 596MB of it used by the graphics card so this really unacceptable. Is there a way to fix it? 2) Why does Google Reader feel so slow and unresponsive on it? It lags so bad when I just try scrolling through the page. I know Opera is known for being really smooth while scrolling through pages. There's also a white bar at the bottom of the page that I can get rid of. It blocks the "Next" and "Previous" buttons. The test between articles is also sort of intersecting each other and that just looks completely unattractive and that's something i'm not used with any web browser. I realize there's a built-in RSS reader, but it doesn't sync across multiple computers and is very late at updating. Here are my specs: Windows 7 Ultimate (x86), Intel Pentium M 1.86 GHz, 1.5GB RAM, ATI Mobility Radeon X600 (64MB dedicated, 596MB shared)

  Read the article

• Blender refuses to start

  - by Sekhemty

  I'm trying to run Blender under Linux, but I'm unable to do that, whenever I try I get some errors. I'm using Kubuntu 12.04 with KDE 4.11.1. This is my video card: ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610/M74 [Mobility Radeon HD 2400 XT] I used to have installed the fglrx proprietary Catalyst drivers, but lately they gave me some system-wide problems and I had to revert to the open source Mesa drivers (I don't think that these details are important, but just in case, the whole story is here). Whit the fglrx drivers Blender was running fine, but now, whenever I try to start it, I get this error message (some parts are in italian, but I think that they are easily understandable): ~$ blender connect failed: No such file or directory Writing: /tmp/blender.crash.txt Errore di segmentazione (core dump creato) The content of /tmp/blender.crash.txt is as follows: # Blender 2.68 (sub 5), Revision: 60150 # backtrace /usr/lib/blender/blender() [0x877a41f] [0xb7756400] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(_ZN4llvm3ARM8SPRClassC1Ev+0x15) [0xa8f4a9d5] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(+0x25ca48) [0xa8eefa48] /lib/ld-linux.so.2(+0xeeab) [0xb7765eab] /lib/ld-linux.so.2(+0xef94) [0xb7765f94] /lib/ld-linux.so.2(+0x12fa6) [0xb7769fa6] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/ld-linux.so.2(+0x127f4) [0xb77697f4] /lib/i386-linux-gnu/libdl.so.2(+0xbe9) [0xb4ff9be9] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/i386-linux-gnu/libdl.so.2(+0x133a) [0xb4ffa33a] /lib/i386-linux-gnu/libdl.so.2(dlopen+0x47) [0xb4ff9c97] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x3cbf0) [0xb7717bf0] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x4079d) [0xb771b79d] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x1a3aa) [0xb76f53aa] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(glXQueryVersion+0x2e) [0xb76f0cee] /usr/lib/blender/blender(_ZN15GHOST_WindowX11C1EP15GHOST_SystemX11P9_XDisplayRK10STR_Stringiijj18GHOST_TWindowStatei25GHOST_TDrawingContextTypebbt+0x11c) [0x8f54aec] /usr/lib/blender/blender(_ZN15GHOST_SystemX1112createWindowERK10STR_Stringiijj18GHOST_TWindowState25GHOST_TDrawingContextTypebbti+0xd7) [0x8f4f4a7] /usr/lib/blender/blender(GHOST_CreateWindow+0xb6) [0x8f4cf86] /usr/lib/blender/blender(wm_window_add_ghostwindows+0x205) [0x8799be5] /usr/lib/blender/blender(WM_check+0x50) [0x877b670] /usr/lib/blender/blender(wm_homefile_read+0x111) [0x87859f1] /usr/lib/blender/blender(WM_init+0xd2) [0x8787872] /usr/lib/blender/blender(main+0xe6e) [0x873848e] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb4e694d3] /usr/lib/blender/blender() [0x8778a99] The only thing that I can guess from this report is that the mesa drivers are somewhat involved, as I already suspected, but I don't have a clue on what I need to do to try to solve the issue.

  Read the article

• Screen becomes black after pressing dash or alt-tab

  - by cegerxwin

  I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

  Read the article

• Windows being placed on wrong monitor

  - by osarusan

  I'm running a fresh install of Ubuntu 12.04x64 (ATI Radeon HD4770 with open source drivers) and I am having trouble getting windows to appear on the right screen. Yesterday I plugged in my secondary monitor and it worked perfectly out of the box, except that for some reason, compiz wants to place windows on the secondary monitor rather than the first. This is a problem because I don't use the secondary monitor 100% of the time, and I don't want windows being placed on it when it is off. Also, it's only some windows that are getting placed there. For example, the "Edit Connections" window from the networking menu is always placed off my primary screen. There are a number of other windows that do the same. While some, like nautilus, always appear on the proper monitor. I played around with Compiz Config Settings Manager and found that if I disable the "Place Windows" plugin, all of the windows appear on the proper monitor -- except that they are placed underneath the Unity Panel, so I have to alt-drag them out each time in order to use them. With out without that plugin, I can't seem to get a sensible setup. The windows are supposed to appear only on the active display, but for some reason Compiz doesn't want to do that with some windows. Does anyone know a fix for this? I'd rather not have to disable and re-enable my monitor every single time I use it...

  Read the article

• Gateway ZA8 Netbook graphics Issue

  - by Hansel

  The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

  Read the article

• Installation failed with a Blank Screen

  - by Bear

  Blank Screen, no Fix I've tried works... Hardware conflict maybe? First I tried AMD64 Ubuntu desktop. I got into the boot screen, however selecting install returns 1-2 seconds of code then blank screen no-idle. Then I tried the alternate install. Worked, some additional software installs failed. Go to boot for first time, I see BIOS load then black/blank screen. No flicker or cursor... screen turns off. (I am also having issues installing any 64bit OS legit WIN 7 64 Ult., WinXP 64 PRO ISO, also WinXP 32 Legit, WinXP 64Pro ISO returns BSOD on install. All win 7 builds return with CD/DVD driver error. The only OS that installs is beta build 7000 win 7.) Please help! I am using: BIOS Build = E7696AMS V1.5 HDD = Hitachi HDP725050GLA 500.00 GB (SATA) CDD = Optiarc DVD RW AD-72 (SATA) MOBO = MSI A75MA-G55 AMD A Series Motherboard - Micro ATX, Socket FM1, AMD A75 Chipset, 1866MHz DDR3 (O.C.), SATA 6.0 Gb/s, 8-CH Audio, Gigabit LAN, SuperSpeed USB 3.0, AMD Dual Graphics Ready CPU = AMD A6-Series AD3650WNGXBOX Quad-Core A6-3650 APU - 4MB L2 Cache, 2.6GHz, Socket FM1, Radeon HD 6530D (320 Cores), Dual Graphics Ready, DirectX 11 RAM = Corsair CMZ16GX3M4A1600C9B Vengeance Desktop Memory Kit - 16GB (4x 4GB), PC3-12800, DDR3-1600MHz, 9-9-9-24 CAS Latency, Intel XMP Ready, Unbuffered

  Read the article

• Problems with both LightDM and GDM using DisplayLink USB monitor

  - by Austin

  When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

  Read the article

• OpenGL: Attempt to allocate a texture to big for the current hardware

  - by AnonymousMan

  I'm getting the following error: java.io.IOException: Attempt to allocate a texture to big for the current hardware at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:320) at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:254) at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:200) at org.newdawn.slick.opengl.TextureLoader.getTexture(TextureLoader.java:64) at org.newdawn.slick.opengl.TextureLoader.getTexture(TextureLoader.java:24) The image I'm trying to use is 128x128. System.out.println(GL11.glGetInteger(GL11.GL_MAX_TEXTURE_SIZE)); I get: 32. 32??!! My graphics card is AMD Radeon HD 7970M with 2048 MB GDDR5 RAM, I can run all the latest games in 1080p and 60fps with no problem, and those textures sure as hell doesn't look like they are 32x32 pixels to me! How can I fix this? -- Edit: Here's the chaos code I use to init OpenGL: Display.setDisplayMode(new DisplayMode(500,500)); Display.create(); if (!GLContext.getCapabilities().OpenGL11) { throw new Exception("OpenGL 1.1 not supported."); } Display.setTitle("Game"); glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluPerspective(45, 1, 0.1f, 5000); Mouse.setGrabbed(true); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnable(GL_TEXTURE_2D); glClearColor(0, 0, 0, 0); glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LEQUAL); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glEnable(GL_BLEND); glEnable(GL_POINT_SMOOTH); glEnable(GL_LINE_SMOOTH); glEnable(GL_POLYGON_SMOOTH); glEnable(GL_POLYGON_OFFSET_FILL); glShadeModel(GL_SMOOTH); Display is a LWJGL thing, it makes the OpenGL context and the window. Anyway, I don't think there's anything in the init code that can help me but you never know...

  Read the article

• Acer Aspire One 725 - missing graphic card driver?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >