Search Results

Search found 20816 results on 833 pages for 'vsphere client'.

Page 35/833 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• blu-ray archiving in vmware ESXi 4

  - by spacecadet77

  Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

  Read the article

• Web Client Service constantly in 'Stopping' state

  - by Mark

  I have a user who's Web Client service constantly reports that it's in the 'Stopping' state and it's hindering her ability to save JMP files to a SharePoint site using the UNC path. She's running Windows XP Service Pack 3. I've tried modifying the Web Client parameters in the registry for UseBasicAuth and FileAttributesLimitInBytes with no luck. When I set the service to Manual and then try to start it after Windows boots up, it starts and then immediately goes into the Stopping state again. Other things I've tried: Removing/Reinstalling her network card Removing/Reinstalling the Client for Microsoft Networks and File and Print Sharing Checked that the BITS and RPC services are running fine (not sure if they're related) Does anyone have any other ideas? Is there a way to repair/rebuild the Web Client service?

  Read the article

• Reverse proxy for mailserver (SMTP + HTTP for web client)

  - by gaqzi

  I'm looking at doing some reverse proxy work for a mail server with corresponding web client. Both servers are running on the same machine, this is not a server with a high load. :) The solution I've discussed with friends is having the mail server/web client on our internal network. Then to put a reverse proxy on the DMZ to service both SMTP and web client HTTP-traffic to the mail server on the internal network. From what I understand this is the recommended secure solution? So far I've thought for the SMTP-proxy part of using postfix which will receive mail, do some spamhause and similar anti-spam measures and if it all checks out, send the mail to the mail server on the inside. The mail server on the inside will send all outgoing mail to the proxy which will then send it out on the Internet. For the web client I'm not sure exactly which software I should be running on the proxy machine, I've been thinking about using Squid -- but that's basically based on the fact that I know squid is a http proxy. The web client data will be sent out over SSL. Reading around some here on Serverfault I've seen other people using Apache with mod_proxy+mod_security for similar situations. Am I thinking correctly for this solution? What software would you guys use and with which modules? Thanks in advance for the help! :)

  Read the article

• qemu-img: Could not open $FILE

  - by HTTP500

  I received a single-file VMDK from a vendor that has a virtual appliance for a particular product I'm interested in evaluating. We run a KVM solution (Proxmox) so I tried converting the file but on that system qemu-img blows up. (I was able to convert (multipart) VMDK files from bitnami without error.) So I figured I'll just yum install qemu-img on a RHEL 6.3 VM and do it there. But despite the fact that I can file the file just fine when I run qemu-img on it I get this error that it can't open the file: [root@host dir]# file 1.vmdk 1.vmdk: VMware4 disk image [root@host dir]# qemu-img info 1.vmdk qemu-img: Could not open 'vmdk' I've seen some other people post on the interwebs that they've had this problem but none of them seem to have a resolution. Does anyone have any ideas? I have checked the MD5SUM already. EDIT1: [root@host dir]# qemu-img info -f vmdk 1.vmdk qemu-img: Could not open '1.vmdk' EDIT2: Ran strace per suggestion. Not sure what to look for... Here is a possible: ioctl(3, CDROM_DRIVE_STATUS, 0x7fffffff) = -1 ENOTTY (Inappropriate ioctl for device)

  Read the article

• Apache not Forwarding Client x509 Certificate to Tomcat via mod_proxy

  - by hooknc

  Hi Everyone, I am having difficulties getting a client x509 certificate to be forwarded to Tomcat from Apache using mod_proxy. From observations and reading a few logs it does seem as though the client x509 certificate is being accepted by Apache. But, when Apache makes an SSL request to Tomcat (which has clientAuth="want"), it doesn't look like the client x509 certificate is passed during the ssl handshake. Is there a reasonable way to see what Apache is doing with the client x509 certificate during its handshake with Tomcat? Here is the environment I'm working with: Apache/2.2.3 Tomcat/6.0.29 Java/6.0_23 OpenSSL 0.9.8e Here is my Apache VirtualHost SSL config: <VirtualHost xxx.xxx.xxx.xxx:443> ServerName xxx ServerAlias xxx SSLEngine On SSLProxyEngine on ProxyRequests Off ProxyPreserveHost On ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW SSLCertificateFile /usr/local/certificates/xxx.crt SSLCertificateKeyFile /usr/local/certificates/xxx.key SSLCertificateChainFile /usr/local/certificates/xxx.crt SSLVerifyClient optional_no_ca SSLOptions +ExportCertData CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass / https://xxx.xxx.xxx.xxx:8443/ ProxyPassReverse / https://xxx.xxx.xxx.xxx:8443/ </VirtualHost> Then here is my Tomcat SSL Connector: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" address="xxx.xxx.xxx.xxx" maxThreads="150" scheme="https" secure="true" keystoreFile="/usr/local/certificates/xxx.jks" keypass="xxx_pwd" clientAuth="want" sslProtocol="TLSv1" proxyName="xxx.xxx.xxx.xxx" proxyPort="443" /> Could there possibly be issues with SSL Renegotiation? Could there be problems with the Truststore in our Tomcat instance? (We are using a non-standard Truststore that has partner organization CAs.) Is there better logging for what is happening internally with Apache for SSL? Like what is happening to the client cert or why it isn't forwarding the certificate when tomcats asks for one? Any reasonable assistance would be greatly appreciated. Thank you for your time.

  Read the article

• Fortinet SSL VPN Client Setup Without GUI on Linux (centos)

  - by Calua

  How can I install and setup a fortinet SSL VPN client on a VPS that's running on Centos? I have problem to do it because all guide I have are all using GUI which is not installed on the VPS to save resource. (example: http://dbssolutions.freshdesk.com/solution/categories/1513/folders/3047/articles/1791-how-to-install-the-linux-fortinet-ssl-vpn-client) I already have the linux version for the vpn client but not sure how to install and configure it only using the terminal.

  Read the article

• SLES 10 Sp3 VMware tools error on install

  - by Elgreco

  I installed SUSE enterprise server 10 SP3 on a Esx 4 server The problem starts with the installation of vmware tools. "VmwareTools-4.0.0-193498.tar.gz" The tools wont start: Unable to start services for vmware tools Paravirtual ISCSI module: Failed Guest vmxnet fast network device: Failed. I fixed the guest vmxent ERROR by changing the NIC mode. any hint? i cant be the only one with the same problem..

  Read the article

• Storage device not found on ESX4 with AIC-9410

  - by Mads

  I am trying to install ESX 4.0 update 1 on a Supermicro X7DBR-3 system with an embedded AIC-9410 HBA (this HBA is listed on the HCG with Vendor ID 9005 and Device ID 041f) . All SATA controllers are disabled in the BIOS and the logical drive shows up in the Adaptec device summary during POST, however there is nothing listed on the Storage Device screen. The HBA itself is listed if I run esxcfg-info but not if I run esxcfg-scsidevs -a (under ESXi for that last command) Any ideas where I can look next or what might be wrong?

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• Nexus 1000v VEM fails on 2 out of 8 hosts.

  - by cougar694u

  I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

  Read the article

• ghettoVCB issue

  - by romgo75

  I have setup a ghettoVCB script in order to backup three VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folders, one for each VM. In each folder I have the following files: -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finish the process. When I read the logs concerning this folder I get: 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run ghettoVCB anymore because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle rotation of the VM backups? Any ideas? Thanks!

  Read the article

• Why is vCenter 5.1u1 exiting hosts from maintenance mode?

  - by Shane Madden

  This vCenter server was just upgraded to 5.1 update 1. I'm going through hosts and bringing firmware up to date, then upgrading them from various versions of 5.0 to 5.1u1. vCenter 5.1u1 seems to have an interesting new behavior: it's removing hosts from maintenance mode when they reconnect after being disconnected -- but very inconsistently, I've seen it maybe 4 or 5 times on ~25-30 host reboots. I've only seen it happen on 5.0 hosts that have not yet been upgraded to 5.1. In the image, I placed the host in maint mode and rebooted it into the HP SPP DVD's automatic update mode. After its usual ~40 minute update process, the host came back online.. and 7 seconds before even logging that the host had reconnected, vCenter had sent the host a task to exit maintenance mode. In my understanding, the only time vCenter should drop a host out of maintenance mode is when vCenter put it into maintenance mode itself (such as a VUM upgrade task). Why would this vCenter be unilaterally exiting a host from user-initiated maintenance mode? Edit, additional info: I ran the firmware upgrades on 5 more hosts, all at the same time. Two of them exited maint mode after reconnecting, three did not. The common factor of those exiting maint mode seems to be how long they were offline; the two that took a few tries to boot to the virtual media are the two that got knocked out of maint mode. esx31 (image above): 45 minutes unresponsive esx19 (exited maint): 87 minutes unresponsive esx24 (stayed in maint): 32 minutes unresponsive esx29 (stayed in maint): 39 minutes unresponsive esx32 (stayed in maint): 30 minutes unresponsive esx34 (exited maint): 70 minutes unresponsive Edit: The disconnect time idea seems to have been a red herring, as it's not happening consistently. Additionally, in the vpxd.log the exit maint mode task initiation seems to always immediately follow this vim.EnvironmentBrowser.queryProvisioningPolicy SOAP call. Here's the lines, slightly trimmed for clarity: 15:27:49.535 [info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (esx31, vim.EnvironmentBrowser.queryProvisioningPolicy) 15:27:49.560 [info 'commonvpxLro'] [VpxLRO] -- BEGIN task -- esx31 -- HostSystem.exitMaintenanceMode -- Note that on the nodes that don't get the exit task, the vim.EnvironmentBrowser.queryProvisioningPolicy event still occurs. I'm not seeing any other differences in events before or after this in the reconnect process, aside from the extra events caused by exiting maintenance mode. Given the log's mention of provisioning policies, looking for autodeploy-related maintenance mode issues turns up complaints about similar behavior (though I'm not using autodeploy at all).

  Read the article

• ghettoVCB issue

  - by romgo75

  Hi, I setup ghettoVCB script in order to backup 3 VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folder, one for each VM. For each Folder I have th following files : -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finished the process. When I read the logs concerned by this folder I get : 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run anymore ghetto VCB because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle vm abckup rotate ? Any idea ? Thanks !

  Read the article

• how to make a script for esxi vms rebooting process.

  - by user116374

  I'm Using ESXi 5.0 And I have created a lab for metasploit. one time my system exploited, so i have to restart my vms. so it's too much Headache. i have to execute lots of exploit. so i don't want to do the same restart process again and again. so maybe it is possible through the script. so again im stuck. I don't know how to write a script for this process. PLEASE tell me how to write a script for AUTOMATION restart process in 10 20 minute. And how to execute that script. Please Share your knowledge if you know. this script thing is very very useful for me. And also tell me any other way if you know. Ty. Alen.

  Read the article

• ISA 2006 Ent with NLB configuration

  - by Nagori

  Hello We have created to virtual machines and installed ISA 2006 Ent and enable NLB configuration, each machine has two NIC one connected to LAN and other connected to DMZ, we are not able to ping DMZ subnet IP of ISA from another machine which is on same DMZ subnet even though we have diable the all ISA services (including firewall). But we can ping LAN IP from all our internal subnets and this ping is working with ISA services are started or stop status Thank you

  Read the article

• Setting up Linux VPN Client on Mint: Never sends "Set-Link-Info" packet

  - by cabanaboy

  I have tried to set up a VPN Connection on the Linux Mint disto, but could not get it working. When I use a Windows 7 VPN client it works fine. I brought up Wireshark on both Windows and Linux machine and noticed that on the Windows machine, the client never attempted to send the "Set-Link-Info" packet whereas the Windows (working) VPN client did. Why isn't the Linux Mint client sending the "Set-Link-Info" packet. I think if it did that, then my connection would work. What am I missing?

  Read the article

• How to resolve a "driver failure" error in the Cisco VPN client connecting from a Windows 7 client

  - by JosephStyons

  I have recently upgraded my laptop from Windows Vista SP1 to Windows 7 Professional. After the upgrade, if I try to use the Cisco VPN client to connect to a network, I get this message: Secure VPN Connection terminated locally by the Client. Reason 440: Driver Failure. Prior to the upgrade, I was able to connect with no problems. The version of the client I am using is 5.0.05.0290.

  Read the article

• VMWare Guest NIC Teaming

  - by Justin Popa

  We're looking to add additional bandwidth to a VM running on an ESXi cluster running 5.1. How can I team these within the VM? I suspect I need to add a second e1000 and then install some Intel software to team them. Any idea which version of Intel driver? Is there some better software to use? EDIT: Sorry, neglected some information. The guest OS is Win2k8R2. The physical NICs on the host are 1Gbps. The reason this has come up is we are seeing the VM hitting near cap on the capability of a single 1Gbps link (Usually at 100-110MBps, bursting to 130s, but I think that may just be a UI math lie) and we're interested in seeing if adding an additional NIC in a teamed setting will increase the overall throughput.

  Read the article

• Why are snapshots considered as temporary backups not real backups?

  - by Samselvaprabu

  I am using VMware ESXi. In our team we use to provide snapshots for long term backup. Then we faced issues like memory spillover and the server got hang up. I started reading in VMware knowledgebase articles and everywhere. Everywhere it was recommended not to have snapshots for a long time. Even VMware advised to keep snapshots for maximum of three days. But our team kept asking us to have at least two permanent snapshots (till deleting the VM). Sometimes we may use the VM for a year). one snapshot is for fresh machine state. (So when we complete testing an application, we will revert back to fresh state and install another application) (If I did not allow that, I may often need to host the VM.) Next snapshot for keeping the VM in some state (maybe they would have found an issue and keep that state for some time. Or they may install prerequisites for the application and keep the machine ready for testing.) Logically, their needs seems to be fair. But if I allow that, I am to permit them to hold the snapshots for long time. We are not using our VM as a mail server or database server. Why is keeping snapshots for long time having an adverse effect? Why are snapshots considered as temporary backups, not real backups?

  Read the article

• Unable to map to web folder using WebDAV client on Windows Server 2008 R2

  - by user74989

  I have a client running Windows Server 2008 R2 on several servers. One of the servers is also running SharePoint 3.0 and my client has created a web folder to map to. I can map to the web folder from all Server 2008 R2 boxes that have the WebDAV client (part of Desktop Experience feature) installed, except for the server the folder resides on. When I attempt to map to the web folder on the server which the folder resides, I am repeatedly prompted to enter my credentials. I am using the same account that I used to map the web folder on the other servers. I have also tried mapping from the command line and receive 'Access Denied' What may be causing the problem? I would think that if I can map to the drive from one server, I should be able to map the drive from the rest as long as the WebDAV client is installed, especially on the server where the folder is located. Jesse

  Read the article

• NFS Client reports Permission Denied, Server reports Permission Granted

  - by VxJasonxV

  I have two RedHat 4 Servers. The client is 4.6, the server is 4.5. I'm attempting to mount a share from the server, onto the client via NFS. The /etc/exports configuration is as follows: /opt/data/config bkup(rw,no_root_squash,async) /opt/data/db bkup(rw,no_root_squash,async) exportfs returns these (among other) shares, nfs is running according to ps output. I've been attempting to use autofs on the client, but have opted to just mount the share manually considering the issues I'm having. So, I issue the mount request: mount dist:/opt/data/config /mnt/config mount: dist:/opt/data/config failed, reason given by server: Permission denied Ok, so let's see what the server has to say for itself. May 6 23:17:55 dist mountd[3782]: authenticated mount request from bkup:662 for /opt/data/config (/opt/data/config) It says it allowed the mount to take place. How can I diagnose why the client and server are disagreeing on the result?

  Read the article

• Multi-Tenant VMWare View Deployment

  - by SimonJGreen

  We have VMWare View 5 set up for a single tenant environment, absolutely brilliant and works perfectly. Two thumbs up there! We're looking at the possibility of deploying this in a multi tenant scenario, where multiple unlinked companies connect to a VDI solution hosted by us but have no visibility of each other. Obviously;y this could be achieved by doubling up on all the components, having a complete VMWare View stack for each tenant, but this seems a little bit messy. Has anyone done this before, and if so how? Googling sheds little light apart from this experts exchange topic.

  Read the article

• Adobe Reader Wants Sensitive Email Details

  - by KDM

  When I run Adobe Reader, it tells me: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client. I have a couple of issues with this: 1) It presupposes everyone has Microsoft Office installed. Not all home users have the budget or inclination for this. 2) It presupposes everyone wants Microsoft Outlook to be their default mail client. 3) I have Microsoft Office (incl. Outlook) installed and set as my default mail client. Even if I make it the default mail client from within the Adobe Reader Preferences, that doesn't stop the dialog appearing. 4) I thought I'd give Adobe Reader a new email address in the preferences, just to get it to stop bugging me. I notice, though, that it want's the SMTP and POP addresses and the account password? They have got to be kidding? I just want to view PDF files. How do I get the message to go away without telling Adobe my life story, giving them my mother's maiden name, my favourite movie, my place of birth, the name of my first goldfish and emptying the contents of my wallet for them?

  Read the article

• Windows 7 VPN Client Default IPsec Configuration?

  - by bwerks

  As far as I can tell, the windows VPN client doesn't provide a lot of flexibility in its IPsec settings. Assuming full configurability on the site end of a client-site VPN configuration, does anyone how to configure the site to match the windows client? Bonus points: how would I discover these settings for myself?

  Read the article

• use SVN @ client end and CM synergy @ server side

  - by Ravisha

  We are using CM synergy client as version control,but we find it very complicated.We are mostly biased with SVN client tool.Is there a way to configure svn at client end but maintain CM synergy @ server side.This would help us a lot ,bcos merging and conflict resolution is very simple in SVN.I do not know where to go about this solution,any initial help will be very helpful CM synergy www.windriver.com/cgi-bin/partnerships/directory/viewProd.cgi?id=1451 SVN tortoisesvn.tigris.org/

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >