Search Results

Search found 9178 results on 368 pages for 'nth element'.

Page 350/368 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

  • 1-DimArray Counting same elements (0,1)

    - by Chris
    Hello, I have a 1-dim array that fills up a table of 40 random elements (all the values are either 0 or 1). So i wanne "count" the largest row of the values net to each otherto each other.. Meaning for example : 111100101 = the longest row would be 1111 (= 4 elements of the same kind closest to each other). So 011100 would result in the longest row being 3 elements (3 x 1). My problem i have no idea how to check upon the "next element" and check if its a 0 or 1. Like the first would be 1111 (count 4) but the next would be a 0 value = meaning i have to stop counting. My idea was placing this value (4) in a other array (example: 111100101) , and place the value of the 1's back on zero. And start the process all over again. To find the largest value i have made a other method that checks up the biggest value in the array that keeps track of the count of 0's 1's, this is not the problem. But i cannot find a way to fill the array tabelLdr up. (having all the values of the group of elements of the same kind (being 0 or 1). In the code below i have 2 if's and offcourse it will never go into the second if (to check if the next value in the array is != then its current state (being 0 or 1) Best Regards. public void BerekenDeelrij(byte[] tabel, byte[] tabelLdr) { byte LdrNul = 0, Ldréén = 0; //byte teller = 0; for (byte i = 0; i < tabel.Length; i++) { if (tabel[i] == 0) { LdrNul++; //this 2nd if cleary does not work, but i have no idea how to implend this sort of idea in my program. if (tabel[i] == 1) //if value != 0 then the total value gets put in the second array tabelLdr, { tabelLdr[i] = LdrNul; LdrNul = 0; } } if (tabel[i] == 1) { Ldréén++; if (tabel[i] == 0) { tabelLdr[i] = Ldréén; Ldréén = 0; } } }/*for*/ }

    Read the article

  • PHP array performance

    - by dfo
    Hi, this is my first question on Stackoverflow, please bear with me. I'm testing an algorithm for 2d bin packing and I've chosen PHP to mock it up as it's my bread-and-butter language nowadays. As you can see on http://themworks.com/pack_v0.2/oopack.php?ol=1 it works pretty well, but you need to wait around 10-20 seconds for 100 rectangles to pack. For some hard to handle sets it would hit the php's 30s runtime limit. I did some profiling and it shows that most of the time my script goes through different parts of a small 2d array with 0's and 1's in it. It either checks if certain cell equals to 0/1 or sets it to 0/1. It can do such operations million times and each times it takes few microseconds. I guess I could use an array of booleans in a statically typed language and things would be faster. Or even make an array of 1 bit values. I'm thinking of converting the whole thing to some compiled language. Is PHP just not good for it? If I do need to convert it to let's say C++, how good are the automatic converters? My script is just a lot of for loops with basic arrays and objects manipulations. Thank you! Edit. This function gets called more than any other. It reads few properties of a very simple object, and goes through a very small part of a smallish array to check if there's any element not equal to 0. function fits($bin, $file, $x, $y) { $flag = true; $xw = $x + $file->get_width();; $yh = $y + $file->get_height(); for ($i = $x; $i < $xw; $i++) { for ($j = $y; $j < $yh; $j++) { if ($bin[$i][$j] !== 0) { $flag = false; break; } } if (!$flag) break; } return $flag; }

    Read the article

  • Javascript .removeChild() only deletes even nodes?

    - by user1476297
    first posting. I am trying dynamically add children DIV under a DIV with ID="prnt". Addition of nodes work fine no problem. However strange enough when it comes to deleted nodes its only deleting the even numbered nodes including 0. Why is this, I could be something stupid but it seem more like a bug. I could be very wrong. Please help Thank you in advance. <script type="text/javascript"> function displayNodes() { var prnt = document.getElementById("prnt"); var chlds = prnt.childNodes; var cont = document.getElementById("content"); for(i = 0; i < chlds.length; i++) { if(chlds[i].nodeType == 1) { cont.innerHTML +="<br />"; cont.innerHTML +="Node # " + (i+1); cont.innerHTML +="<br />"; cont.innerHTML +=chlds[i].nodeName; cont.innerHTML +="<br />"; } } } function deleteENodes() { var prnt = document.getElementById("prnt"); var chlds = prnt.childNodes; for(i = 0; i < chlds.length; i++) { if(!(chlds[i].nodeType == 3)) { prnt.removeChild(chlds[i]); } } } function AddENodes() { var prnt = document.getElementById("prnt"); //Only even nodes are deletable PROBLEM for(i = 0; i < 10; i++) { var newDIV = document.createElement('div'); newDIV.setAttribute("id", "c"+(i)); var text = document.createTextNode("New Inserted Child "+(i)); newDIV.appendChild(text); prnt.appendChild(newDIV); } } </script> <title>Checking Div Nodes</title> </head> <body> <div id="prnt"> Parent 1 </div> <br /> <br /> <br /> <button type="button" onclick="displayNodes()">Show Node Info</button> <button type="button" onclick="deleteENodes()">Remove All Element Nodes Under Parent 1</button> <button type="button" onclick="AddENodes()">Add 5 New DIV Nodes</button> <div id="content"> </div> </body>

    Read the article

  • How to configure emacs by using this file?

    - by Andy Leman
    From http://public.halogen-dg.com/browser/alex-emacs-settings/.emacs?rev=1346 I got: (setq load-path (cons "/home/alex/.emacs.d/" load-path)) (setq load-path (cons "/home/alex/.emacs.d/configs/" load-path)) (defconst emacs-config-dir "~/.emacs.d/configs/" "") (defun load-cfg-files (filelist) (dolist (file filelist) (load (expand-file-name (concat emacs-config-dir file))) (message "Loaded config file:%s" file) )) (load-cfg-files '("cfg_initsplit" "cfg_variables_and_faces" "cfg_keybindings" "cfg_site_gentoo" "cfg_conf-mode" "cfg_mail-mode" "cfg_region_hooks" "cfg_apache-mode" "cfg_crontab-mode" "cfg_gnuserv" "cfg_subversion" "cfg_css-mode" "cfg_php-mode" "cfg_tramp" "cfg_killbuffer" "cfg_color-theme" "cfg_uniquify" "cfg_tabbar" "cfg_python" "cfg_ack" "cfg_scpaste" "cfg_ido-mode" "cfg_javascript" "cfg_ange_ftp" "cfg_font-lock" "cfg_default_face" "cfg_ecb" "cfg_browser" "cfg_orgmode" ; "cfg_gnus" ; "cfg_cyrillic" )) ; enable disabled advanced features (put 'downcase-region 'disabled nil) (put 'scroll-left 'disabled nil) (put 'upcase-region 'disabled nil) ; narrow cursor ;(setq-default cursor-type 'hbar) (cua-mode) ; highlight current line (global-hl-line-mode 1) ; AV: non-aggressive scrolling (setq scroll-conservatively 100) (setq scroll-preserve-screen-position 't) (setq scroll-margin 0) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(ange-ftp-passive-host-alist (quote (("redbus2.chalkface.com" . "on") ("zope.halogen-dg.com" . "on") ("85.119.217.50" . "on")))) '(blink-cursor-mode nil) '(browse-url-browser-function (quote browse-url-firefox)) '(browse-url-new-window-flag t) '(buffers-menu-max-size 30) '(buffers-menu-show-directories t) '(buffers-menu-show-status nil) '(case-fold-search t) '(column-number-mode t) '(cua-enable-cua-keys nil) '(user-mail-address "[email protected]") '(cua-mode t nil (cua-base)) '(current-language-environment "UTF-8") '(file-name-shadow-mode t) '(fill-column 79) '(grep-command "grep --color=never -nHr -e * | grep -v .svn --color=never") '(grep-use-null-device nil) '(inhibit-startup-screen t) '(initial-frame-alist (quote ((width . 80) (height . 40)))) '(initsplit-customizations-alist (quote (("tabbar" "configs/cfg_tabbar.el" t) ("ecb" "configs/cfg_ecb.el" t) ("ange\\-ftp" "configs/cfg_ange_ftp.el" t) ("planner" "configs/cfg_planner.el" t) ("dired" "configs/cfg_dired.el" t) ("font\\-lock" "configs/cfg_font-lock.el" t) ("speedbar" "configs/cfg_ecb.el" t) ("muse" "configs/cfg_muse.el" t) ("tramp" "configs/cfg_tramp.el" t) ("uniquify" "configs/cfg_uniquify.el" t) ("default" "configs/cfg_font-lock.el" t) ("ido" "configs/cfg_ido-mode.el" t) ("org" "configs/cfg_orgmode.el" t) ("gnus" "configs/cfg_gnus.el" t) ("nnmail" "configs/cfg_gnus.el" t)))) '(ispell-program-name "aspell") '(jabber-account-list (quote (("[email protected]")))) '(jabber-nickname "AVK") '(jabber-password nil) '(jabber-server "halogen-dg.com") '(jabber-username "alex") '(remember-data-file "~/Plans/remember.org") '(safe-local-variable-values (quote ((dtml-top-element . "body")))) '(save-place t nil (saveplace)) '(scroll-bar-mode (quote right)) '(semantic-idle-scheduler-idle-time 432000) '(show-paren-mode t) '(svn-status-hide-unmodified t) '(tool-bar-mode nil nil (tool-bar)) '(transient-mark-mode t) '(truncate-lines f) '(woman-use-own-frame nil)) ; ?? ????? ??????? y ??? n? (fset 'yes-or-no-p 'y-or-n-p) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(compilation-error ((t (:foreground "tomato" :weight bold)))) '(cursor ((t (:background "red1")))) '(custom-variable-tag ((((class color) (background dark)) (:inherit variable-pitch :foreground "DarkOrange" :weight bold)))) '(hl-line ((t (:background "grey24")))) '(isearch ((t (:background "orange" :foreground "black")))) '(message-cited-text ((((class color) (background dark)) (:foreground "SandyBrown")))) '(message-header-name ((((class color) (background dark)) (:foreground "DarkGrey")))) '(message-header-other ((((class color) (background dark)) (:foreground "LightPink2")))) '(message-header-subject ((((class color) (background dark)) (:foreground "yellow2")))) '(message-separator ((((class color) (background dark)) (:foreground "thistle")))) '(region ((t (:background "brown")))) '(tooltip ((((class color)) (:inherit variable-pitch :background "IndianRed1" :foreground "black"))))) The above is a python emacs configure file. Where should I put it to use it? And, are there any other changes I need to make?

    Read the article

  • Users suddenly missing write permissions to the root drive c within an active directory domain

    - by Kevin
    I'm managing an active directory single domain environment on some Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 machines. Since a few weeks I got a strange issue. Some users (not all!) report that they cannot any longer save, copy or write files to the root drive c, whether on their clients (vista, win 7) nor via remote desktop connection on a Windows Server 2008 machine. Even running programs that require direct write permissions to the root drive without administrator permissions fail to do so since then. The affected users have local administrator permissions. The question I'm facing now is: What caused this change of system behavior? Why did this happen? I didn't find out yet. What was the last thing I did before it happened? The last action that was made before it happened was the rollout of a GPO containing network drive mappings for the users depending on their security group membership. All network drives are located on a linux server with samba enabled. We did not change any UAC settings, and they have always been activated. However I can't imagine that rolling out this GPO caused the problem. Has anybody faced an issue like that? Just in case: I know that it is for a specific reason that an user without administrative privileges is prevented from writing to the root drive since windows vista and the implementation of UAC. I don't think that those users should be able to write to drive c, but I try to figure out why this is happening and a few weeks ago this was still working. I also know that a user who is a member of the local administrators group does not execute anything with administrator permissions per default unless he or she executes a program with this permissions. What did I do yet? I checked the permissions of the affected programs, the affected clients/server. Didn't find something special. I checked ALL of our GPOs if there exist any restrictions that could prevent the affected users from writing to the root drive. Did not find any settings. I checked the UAC settings of the affected users and compared those to other users that still can write to the root drive. Everything similar. I googled though the internet and tried to find someone who had a similar problem. Did not find one. Has anybody an idea? Thank you very much. Edit: The GPO that was rolled out does the following (Please excuse if the settings are not named exactly like that, I translated the settings into english): **Windows Settings -- Network Drive Mappings -- Drive N: -- General:** Action: Replace **Properties:** Letter: N Location: \\path-to-drive\drivename Re-Establish connection: deactivated Label as: Name_of_the_Share Use first available Option: deactivated **Windows Settings -- Network Drive Mappings -- Drive N: -- Public: Options:** On error don't process any further elements for this extension: no Run as the logged in user: no remove element if it is not applied anymore: no Only apply once: no **Securitygroup:** Attribute -- Value bool -- AND not -- 0 name -- domain\groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 **Securitygroup:** Attribute -- Value bool -- OR not -- 0 name -- domain\another-groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 Edit: The Error-Message of an affected users says the following: Due to an unexpected error you can't copy the file. Error-Code 0x80070522: The client is missing a required permission. The command icacls C: shows the following: NT-AUTORITY\SYSTEM:(OI)(CI)(F) PRE-DEFINED\Administrators:(OI)(CI)(F) computername\username:(OI)(CI)(F) A college just told me that also the primary domain-controller (PDC) changed from Windows Server 2008 to Windows Server 2012. That also may be a reason. Any suggestions?

    Read the article

  • mod_mono 'Service Temporarily Unavailable' issue

    - by Charlie Somerville
    I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

    Read the article

  • how to troubleshoot using rsyslog to output to a mysql database

    - by ChrisNZ
    Using FreeBSD 8.0 32 bit. I have installed rsyslogd 5.5.5 with ommysql. (installed ports /usr/ports/sysutils/rsyslog55 and /usr/ports/sysutils/rsyslog55-mysql) My rsyslog.conf file looks like: $ModLoad imudp $ModLoad imtcp $ModLoad ommysql $ModLoad immark.so $ModLoad imuxsock.so $ModLoad imklog.so $OptimizeForUniprocessor on $AllowedSender UDP, 10.0.0.0/8 $UDPServerAddress 0.0.0.0 $UDPServerRun 514 $UDPServerTimeRequery 2 # +SG560 *.* :ommysql:127.0.0.1,Syslog,sysloguser,mypassword My command line flags for rsyslogd are: -c5 -4 Checking the code with -c5 -N1 returns no errors. I have confirmed that rsyslogd is working by changing the last line to say: *.* /var/log/snapgear.log which results in messages appearing in the snapgear.log file. So it is probably something to do with my MySQL setup If I do: mysql -u sysloguser -p Syslog Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 56 Server version: 5.0.86 FreeBSD port: mysql-server-5.0.86 mysql> select * from SystemEvents; Empty set (0.00 sec) mysql> :-( I have confirmed that sysloguser has full privileges for the Syslog database. If I run rsyslogd on the console in debug mode: /usr/local/sbin/rsyslogd -f /usr/local/etc/rsyslog.conf -c5 -n -d I can see this sequence of events each time a message is received: 9244.376687256:28359280: main Q: entry added, size now log 1, phys 1 entries 9244.376705694:28359280: main Q: EnqueueMsg advised worker start 9244.376726647:28359280: Listening on UDP syslogd socket 4 (IPv4/port 514). 9244.376728602:28359280: --------imUDP calling select, active file descriptors (max 4): 4 9244.376890075:283593c0: wti 0x28306e80: worker awoke from idle processing 9244.376892031:283593c0: we deleted 0 objects and enqueued 0 objects 9244.376893986:283593c0: delete batch from store, new sizes: log 1, phys 1 9244.376895942:283593c0: msgConsumer processes msg 0/1 9244.376897898:283593c0: msg parser: flags 70, from '~NOTRESOLVED~', msg 'Jun 29 17:32:24 SG560 kernel: (20000629T1732244' 9244.376900132:283593c0: parse using parser list 0x283080e8 (the default list). 9244.376902088:283593c0: dropped LF at very end of message (DropTrailingLF is set) 9244.376904044:283593c0: Parser 'rsyslog.rfc5424' returned -2160 9244.376905999:283593c0: Message will now be parsed by the legacy syslog parser (one size fits all... ;)). 9244.376907955:283593c0: Parser 'rsyslog.rfc3164' returned 0 9244.376909910:283593c0: testing filter, f_pmask 255 9244.376911866:283593c0: Called action, logging to ommysql 9244.376918012:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376919967:283593c0: action call returned -2123 9244.376921923:283593c0: tryDoAction: unexpected error code -2123, finalizing 9244.376926113:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376928069:283593c0: ruleset: get iRet 0 from rule.ProcessMsg() 9244.376930024:283593c0: ruleset.ProcessMsg() returns 0 9244.376931980:283593c0: regular consumer finished, iret=0, szlog 0 sz phys 1 9244.376933936:283593c0: XXX: enqueueing data element 0 of 1 9244.376935891:283593c0: we deleted 1 objects and enqueued 0 objects 9244.376938126:283593c0: delete batch from store, new sizes: log 0, phys 0 9244.376940082:283593c0: regular consumer finished, iret=4, szlog 0 sz phys 0 9244.376942037:283593c0: main Q:Reg/w0: worker IDLE, waiting for work. .... I can see the Action Call to ommysql returns unexpected error code -2123 Now I am stuck! Any ideas on what to look for next? Perhaps I there are extra ports I need to install? I will be very grateful for any assistance here!

    Read the article

  • Installing .NET application on IIS 7.5 issues

    - by Juw
    Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" /> <!-- Impersonate NT AUTHORITY/IUSR --> <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <!-- Configure the WCF REST service base address via the global.asax.cs file and the default endpoint via the attributes on the <standardEndpoint> element below --> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

    Read the article

  • The dynamic Type in C# Simplifies COM Member Access from Visual FoxPro

    - by Rick Strahl
    I’ve written quite a bit about Visual FoxPro interoperating with .NET in the past both for ASP.NET interacting with Visual FoxPro COM objects as well as Visual FoxPro calling into .NET code via COM Interop. COM Interop with Visual FoxPro has a number of problems but one of them at least got a lot easier with the introduction of dynamic type support in .NET. One of the biggest problems with COM interop has been that it’s been really difficult to pass dynamic objects from FoxPro to .NET and get them properly typed. The only way that any strong typing can occur in .NET for FoxPro components is via COM type library exports of Visual FoxPro components. Due to limitations in Visual FoxPro’s type library support as well as the dynamic nature of the Visual FoxPro language where few things are or can be described in the form of a COM type library, a lot of useful interaction between FoxPro and .NET required the use of messy Reflection code in .NET. Reflection is .NET’s base interface to runtime type discovery and dynamic execution of code without requiring strong typing. In FoxPro terms it’s similar to EVALUATE() functionality albeit with a much more complex API and corresponiding syntax. The Reflection APIs are fairly powerful, but they are rather awkward to use and require a lot of code. Even with the creation of wrapper utility classes for common EVAL() style Reflection functionality dynamically access COM objects passed to .NET often is pretty tedious and ugly. Let’s look at a simple example. In the following code I use some FoxPro code to dynamically create an object in code and then pass this object to .NET. An alternative to this might also be to create a new object on the fly by using SCATTER NAME on a database record. How the object is created is inconsequential, other than the fact that it’s not defined as a COM object – it’s a pure FoxPro object that is passed to .NET. Here’s the code: *** Create .NET COM InstanceloNet = CREATEOBJECT('DotNetCom.DotNetComPublisher') *** Create a Customer Object Instance (factory method) loCustomer = GetCustomer() loCustomer.Name = "Rick Strahl" loCustomer.Company = "West Wind Technologies" loCustomer.creditLimit = 9999999999.99 loCustomer.Address.StreetAddress = "32 Kaiea Place" loCustomer.Address.Phone = "808 579-8342" loCustomer.Address.Email = "[email protected]" *** Pass Fox Object and echo back values ? loNet.PassRecordObject(loObject) RETURN FUNCTION GetCustomer LOCAL loCustomer, loAddress loCustomer = CREATEOBJECT("EMPTY") ADDPROPERTY(loCustomer,"Name","") ADDPROPERTY(loCustomer,"Company","") ADDPROPERTY(loCUstomer,"CreditLimit",0.00) ADDPROPERTY(loCustomer,"Entered",DATETIME()) loAddress = CREATEOBJECT("Empty") ADDPROPERTY(loAddress,"StreetAddress","") ADDPROPERTY(loAddress,"Phone","") ADDPROPERTY(loAddress,"Email","") ADDPROPERTY(loCustomer,"Address",loAddress) RETURN loCustomer ENDFUNC Now prior to .NET 4.0 you’d have to access this object passed to .NET via Reflection and the method code to do this would looks something like this in the .NET component: public string PassRecordObject(object FoxObject) { // *** using raw Reflection string Company = (string) FoxObject.GetType().InvokeMember( "Company", BindingFlags.GetProperty,null, FoxObject,null); // using the easier ComUtils wrappers string Name = (string) ComUtils.GetProperty(FoxObject,"Name"); // Getting Address object – then getting child properties object Address = ComUtils.GetProperty(FoxObject,"Address");    string Street = (string) ComUtils.GetProperty(FoxObject,"StreetAddress"); // using ComUtils 'Ex' functions you can use . Syntax     string StreetAddress = (string) ComUtils.GetPropertyEx(FoxObject,"AddressStreetAddress"); return Name + Environment.NewLine + Company + Environment.NewLine + StreetAddress + Environment.NewLine + " FOX"; } Note that the FoxObject is passed in as type object which has no specific type. Since the object doesn’t exist in .NET as a type signature the object is passed without any specific type information as plain non-descript object. To retrieve a property the Reflection APIs like Type.InvokeMember or Type.GetProperty().GetValue() etc. need to be used. I made this code a little simpler by using the Reflection Wrappers I mentioned earlier but even with those ComUtils calls the code is pretty ugly requiring passing the objects for each call and casting each element. Using .NET 4.0 Dynamic Typing makes this Code a lot cleaner Enter .NET 4.0 and the dynamic type. Replacing the input parameter to the .NET method from type object to dynamic makes the code to access the FoxPro component inside of .NET much more natural: public string PassRecordObjectDynamic(dynamic FoxObject) { // *** using raw Reflection string Company = FoxObject.Company; // *** using the easier ComUtils class string Name = FoxObject.Name; // *** using ComUtils 'ex' functions to use . Syntax string Address = FoxObject.Address.StreetAddress; return Name + Environment.NewLine + Company + Environment.NewLine + Address + Environment.NewLine + " FOX"; } As you can see the parameter is of type dynamic which as the name implies performs Reflection lookups and evaluation on the fly so all the Reflection code in the last example goes away. The code can use regular object ‘.’ syntax to reference each of the members of the object. You can access properties and call methods this way using natural object language. Also note that all the type casts that were required in the Reflection code go away – dynamic types like var can infer the type to cast to based on the target assignment. As long as the type can be inferred by the compiler at compile time (ie. the left side of the expression is strongly typed) no explicit casts are required. Note that although you get to use plain object syntax in the code above you don’t get Intellisense in Visual Studio because the type is dynamic and thus has no hard type definition in .NET . The above example calls a .NET Component from VFP, but it also works the other way around. Another frequent scenario is an .NET code calling into a FoxPro COM object that returns a dynamic result. Assume you have a FoxPro COM object returns a FoxPro Cursor Record as an object: DEFINE CLASS FoxData AS SESSION OlePublic cAppStartPath = "" FUNCTION INIT THIS.cAppStartPath = ADDBS( JustPath(Application.ServerName) ) SET PATH TO ( THIS.cAppStartpath ) ENDFUNC FUNCTION GetRecord(lnPk) LOCAL loCustomer SELECT * FROM tt_Cust WHERE pk = lnPk ; INTO CURSOR TCustomer IF _TALLY < 1 RETURN NULL ENDIF SCATTER NAME loCustomer MEMO RETURN loCustomer ENDFUNC ENDDEFINE If you call this from a .NET application you can now retrieve this data via COM Interop and cast the result as dynamic to simplify the data access of the dynamic FoxPro type that was created on the fly: int pk = 0; int.TryParse(Request.QueryString["id"],out pk); // Create Fox COM Object with Com Callable Wrapper FoxData foxData = new FoxData(); dynamic foxRecord = foxData.GetRecord(pk); string company = foxRecord.Company; DateTime entered = foxRecord.Entered; This code looks simple and natural as it should be – heck you could write code like this in days long gone by in scripting languages like ASP classic for example. Compared to the Reflection code that previously was necessary to run similar code this is much easier to write, understand and maintain. For COM interop and Visual FoxPro operation dynamic type support in .NET 4.0 is a huge improvement and certainly makes it much easier to deal with FoxPro code that calls into .NET. Regardless of whether you’re using COM for calling Visual FoxPro objects from .NET (ASP.NET calling a COM component and getting a dynamic result returned) or whether FoxPro code is calling into a .NET COM component from a FoxPro desktop application. At one point or another FoxPro likely ends up passing complex dynamic data to .NET and for this the dynamic typing makes coding much cleaner and more readable without having to create custom Reflection wrappers. As a bonus the dynamic runtime that underlies the dynamic type is fairly efficient in terms of making Reflection calls especially if members are repeatedly accessed. © Rick Strahl, West Wind Technologies, 2005-2010Posted in COM  FoxPro  .NET  CSharp  

    Read the article

  • Silverlight 4 Tools for VS 2010 and WCF RIA Services Released

    - by ScottGu
    The final release of the Silverlight 4 Tools for Visual Studio 2010 and WCF RIA Services is now available for download.  Download and Install If you already have Visual Studio 2010 installed (or the free Visual Web Developer 2010 Express), then you can install both the Silverlight 4 Tooling Support as well as WCF RIA Services support by downloading and running this setup package (note: please make sure to uninstall the preview release of the Silverlight 4 Tools for VS 2010 if you have previously installed that).  The Silverlight 4 Tools for VS 2010 package extends the Silverlight support built into Visual Studio 2010 and enables support for Silverlight 4 applications as well.  It also installs WCF RIA Services application templates and libraries: Today’s release includes the English edition of the Silverlight 4 Tooling – localized versions will be available next month for other Visual Studio languages as well. Silverlight Tooling Support Visual Studio 2010 includes rich tooling support for building Silverlight and WPF applications. It includes a WYSIWYG designer surface that enables you to easily use controls to construct UI – including the ability to take advantage of layout containers, and apply styles and resources: The VS 2010 designer enables you to leverage the rich data binding support within Silverlight and WPF, and easily wire-up bindings on controls.  The Data Sources window within Silverlight projects can be used to reference POCO objects (plain old CLR objects), WCF Services, WCF RIA Services client proxies or SharePoint Lists.  For example, let’s assume we add a “Person” class like below to our project: We could then add it to the Data Source window which will cause it to show up like below in the IDE: We can optionally customize the default UI control types that are associated for each property on the object.  For example, below we’ll default the BirthDate property to be represented by a “DatePicker” control: And then when we drag/drop the Person type from the Data Sources onto the design-surface it will automatically create UI controls that are bound to the properties of our Person class: VS 2010 allows you to optionally customize each UI binding further by selecting a control, and then right-click on any of its properties within the property-grid and pull up the “Apply Bindings” dialog: This will bring up a floating data-binding dialog that enables you to easily configure things like the binding path on the data source object, specify a format convertor, specify string-format settings, specify how validation errors should be handled, etc: In addition to providing WYSIWYG designer support for WPF and Silverlight applications, VS 2010 also provides rich XAML intellisense and code editing support – enabling a rich source editing environment. Silverlight 4 Tool Enhancements Today’s Silverlight 4 Tooling Release for VS 2010 includes a bunch of nice new features.  These include: Support for Silverlight Out of Browser Applications and Elevated Trust Applications You can open up a Silverlight application’s project properties window and click the “Enable Running Application Out of Browser” checkbox to enable you to install an offline, out of browser, version of your Silverlight 4 application.  You can then customize a number of “out of browser” settings of your application within Visual Studio: Notice above how you can now indicate that you want to run with elevated trust, with hardware graphics acceleration, as well as customize things like the Window style of the application (allowing you to build a nice polished window style for consumer applications). Support for Implicit Styles and “Go to Value Definition” Support: Silverlight 4 now allows you to define “implicit styles” for your applications.  This allows you to style controls by type (for example: have a default look for all buttons) and avoid you having to explicitly reference styles from each control.  In addition to honoring implicit styles on the designer-surface, VS 2010 also now allows you to right click on any control (or on one of it properties) and choose the “Go to Value Definition…” context menu to jump to the XAML where the style is defined, and from there you can easily navigate onward to any referenced resources.  This makes it much easier to figure out questions like “why is my button red?”: Style Intellisense VS 2010 enables you to easily modify styles you already have in XAML, and now you get intellisense for properties and their values within a style based on the TargetType of the specified control.  For example, below we have a style being set for controls of type “Button” (this is indicated by the “TargetType” property).  Notice how intellisense now automatically shows us properties for the Button control (even within the <Setter> element): Great Video - Watch the Silverlight Designer Features in Action You can see all of the above Silverlight 4 Tools for Visual Studio 2010 features (and some more cool ones I haven’t mentioned) demonstrated in action within this 20 minute Silverlight.TV video on Channel 9: WCF RIA Services Today we also shipped the V1 release of WCF RIA Services.  It is included and automatically installed as part of the Silverlight 4 Tools for Visual Studio 2010 setup. WCF RIA Services makes it much easier to build business applications with Silverlight.  It simplifies the traditional n-tier application pattern by bringing together the ASP.NET and Silverlight platforms using the power of WCF for communication.  WCF RIA Services provides a pattern to write application logic that runs on the mid-tier and controls access to data for queries, changes and custom operations. It also provides end-to-end support for common tasks such as data validation, authentication and authorization based on roles by integrating with Silverlight components on the client and ASP.NET on the mid-tier. Put simply – it makes it much easier to query data stored on a server from a client machine, optionally manipulate/modify the data on the client, and then save it back to the server.  It supports a validation architecture that helps ensure that your data is kept secure and business rules are applied consistently on both the client and middle-tiers. WCF RIA Services uses WCF for communication between the client and the server  It supports both an optimized .NET to .NET binary serialization format, as well as a set of open extensions to the ATOM format known as ODATA and an optional JavaScript Object Notation (JSON) format that can be used by any client. You can hear Nikhil and Dinesh talk a little about WCF RIA Services in this 13 minutes Channel 9 video. Putting it all Together – the Silverlight 4 Training Kit Check out the Silverlight 4 Training Kit to learn more about how to build business applications with Silverlight 4, Visual Studio 2010 and WCF RIA Services. The training kit includes 8 modules, 25 videos, and several hands-on labs that explain Silverlight 4 and WCF RIA Services concepts and walks you through building an end-to-end application with them.    The training kit is available for free and is a great way to get started. Summary I’m really excited about today’s release – as they really complete the Silverlight development story and deliver a great end to end runtime + tooling story for building applications.  All of the above features are available for use both in VS 2010 as well as the free Visual Web Developer 2010 Express Edition – making it really easy to get started building great solutions. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

    - by Reed
    Many routines are parallelized because they are long running processes.  When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled.  I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective.  Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken.  A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource.  There are many goals which led to this design.  For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative.  A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent.  A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query.  Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised.  Be aware, however, that cancellation will not be instantaneous.  When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing.  cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed.  This goes back to the first goal I mentioned – Cancellation is cooperative.  Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns.  This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well.  There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently.  PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack.  This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well.  Here, we supply our CancellationToken as part of the configuration.  The ParallelOptions class contains a property for the CancellationToken.  This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query.  As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ.  The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine.  The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario.  This works because we’re using the same CancellationToken provided in the ParallelOptions.  If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

    Read the article

  • SQL SERVER – Developer Training Resources and Summary Roundup

    - by pinaldave
    It is always pleasure for any author when other renowned authors in the industry write about you. Earlier I wrote a five part blog series on Developer Training and I have received a phenomenal response to the series. I have received plenty of comments, questions and feedback. I thought it would be nice to sum up the whole series as well answer a few of the questions received. Quick Recap Developer Training - Importance and Significance - Part 1 In this part we discussed the importance of training in the real world. The most important and valuable resource any company is its employee. Employees who have been well-trained will be better at their jobs and produce a better product.  An employee who is well trained obviously knows more about their job and all the technical aspects. I have a very high opinion about training employees and it is the most important task. Developer Training – Employee Morals and Ethics – Part 2 In this part we discussed the most crucial components of training. Often employees are expecting the company to pay for their training and the company expresses no interest in training the employee. Quite often training expenses are the real issue for both the employee and employer. There are companies that pay for 100% of the expenses and there are employees who opt for training on their own expense during their personal time. Training is often looked at as vacation by employee and employers and we need to change this mind-set. One of the ways is to report back the learning to your manager and implement newly learned knowledge in day-to-day work. Developer Training – Difficult Questions and Alternative Perspective - Part 3 This part was the most difficult to write as I tried to address a few difficult questions and answers. Training is such a sensitive issue that many developers when not receiving chance for training think about leaving the organization. The manager often feels pressure to accommodate every single employee for training even though his training budget is limited. It is indeed the responsibility of the developer to get maximum advantage from the training. Training immediately helps organizations but stays as a part of an employee’s knowledge forever. Developer Training – Various Options for Developer Training – Part 4 In this part I tried to explore a few methods and options for training. The generic feedback I received on this blog post was short and I should have explored each of the subject of the training in details. I believe there are two big buckets of training 1) Instructor Lead Training and 2) Self Lead Training. The common element between both the methods is “learning material”. Learning material can be of any format – videos, books, paper notes or just a plain black board. Instructor-led training is a very effective mode but not possible every single time. During the course of the developer’s career, one has to learn lots of new technology and it is almost impossible to have a quality trainer available on that subject at that time. Books are most effective and proven methods, however, it always helps if someone explains the concepts of the book with a demonstration. In recent times I have started to believe in online trainings which leads to a hybrid experience. Online trainings take the best part of the books and the best part of the instructor-led training and gives effective training in a matter of hours. Developer Training – A Conclusive Summary- Part 5 In this part, I shared what I was continuously thinking about developer training. There is no better teacher than oneself. There is no better motivation than a personal desire to learn new technology. Honestly there is nothing more personal learning. That “change is the only constant” and “adapt & overcome” are the essential lessons of life. One cannot stop the learning and resist the change. In the IT industry “ego of knowing all” and the “resistance to change” are the most challenging issues. Once someone overcomes them, life is much easier. I believe that proper and appropriate high quality training can help to address the burning issues. Opinion of Friends I invited a few of my friends to express their opinion about developer training and here are their opinions. I am listing them here in the order of the blog post publishing date. Nakul Vachhrajani - Developer Trainings-Importance, Benefits, Tips and follow-up Nakul’s sums of many of the concepts which are complementary to my blog posts. Nakul addresses the burning question of developer training with different angles. I am personally very impressed by his following statement - “Being skilled does not mean having just a stack of certifications, but it also means having an understanding about the internals of the products that you are working on – and using that knowledge to improve the efficiency & productivity at the workplace in turn resulting in better products, better consulting abilities and a happier self.” Nakul also suggests the online training options of Pluralsight. Vinod Kumar - Training–a necessity or bonus Vinod Kumar comes up with excellent follow up on developer training. Vinod is known for his inspirational writing about SQL Server. Vinod starts with a story of a student who is extremely eager to learn the wisdom of life from a monk but the monk does not accept him as a disciple for a long time. The conversation between student and monk is indeed an essence of all learning. We all want to learn quickly and be successful but the most important thing in life is to have the right attitude towards learning and more so towards life. The blog post end with a very important thought about how to avoid the famous excuse – “I don’t have enough time.” Ritesh Shah - Training – useful or useless? Ritesh brings up very important concept related to training. Ritesh in his meticulous style explains why training is an important and lifelong process. Training must not stop at any age but should continue forever. The moment training stops, progress stops along with. Paras Doshi - Professional Development Resource Paras is known for his to–the-point writing, and has summarized the five part series very precisely. He read the five part series and created a digest summary of the blog post. If you are in a rush and have no time to read my five series – I suggest you read his blog post. Training Resources I am often asked what the best resources for learning new technology are. This is the most difficult question EVER. There are plenty of good training resources available. When it is about training our needs are different, our preference of learning is different and we all have an opinion. Additionally, we all are located in different geographic locations worldwide and there is no way one solution will fit all. However, let me list a few of the training resources which I have built so far and you can consume them if you find it relevant to your need. SQL Server Books SQL Server Interview Questions and Answers SQL Wait Stats SQL Programming Joes 2 Pros SQL Server Video Tutorials SQL Server Questions and Answers SQL Server Performance: Indexing Basics SQL Server Performance: Introduction to Query Tuning SQL in Sixty Seconds Series of Sixty Seconds Learning Video on YouTube Trust me worldwide web is very big and there are plenty of high quality learning materials available worldwide – trainer-led as well online. I suggest you explore various options and make the best choice for yourself. Remember, training is your personal journey and it should never stop. Are you ready? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • ASP.NET MVC 3: Implicit and Explicit code nuggets with Razor

    - by ScottGu
    This is another in a series of posts I’m doing that cover some of the new ASP.NET MVC 3 features: New @model keyword in Razor (Oct 19th) Layouts with Razor (Oct 22nd) Server-Side Comments with Razor (Nov 12th) Razor’s @: and <text> syntax (Dec 15th) Implicit and Explicit code nuggets with Razor (today) In today’s post I’m going to discuss how Razor enables you to both implicitly and explicitly define code nuggets within your view templates, and walkthrough some code examples of each of them.  Fluid Coding with Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to the existing .aspx view engine).  You can learn more about Razor, why we are introducing it, and the syntax it supports from my Introducing Razor blog post. Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. For example, the Razor snippet below can be used to iterate a collection of products and output a <ul> list of product names that link to their corresponding product pages: When run, the above code generates output like below: Notice above how we were able to embed two code nuggets within the content of the foreach loop.  One of them outputs the name of the Product, and the other embeds the ProductID within a hyperlink.  Notice that we didn’t have to explicitly wrap these code-nuggets - Razor was instead smart enough to implicitly identify where the code began and ended in both of these situations.  How Razor Enables Implicit Code Nuggets Razor does not define its own language.  Instead, the code you write within Razor code nuggets is standard C# or VB.  This allows you to re-use your existing language skills, and avoid having to learn a customized language grammar. The Razor parser has smarts built into it so that whenever possible you do not need to explicitly mark the end of C#/VB code nuggets you write.  This makes coding more fluid and productive, and enables a nice, clean, concise template syntax.  Below are a few scenarios that Razor supports where you can avoid having to explicitly mark the beginning/end of a code nugget, and instead have Razor implicitly identify the code nugget scope for you: Property Access Razor allows you to output a variable value, or a sub-property on a variable that is referenced via “dot” notation: You can also use “dot” notation to access sub-properties multiple levels deep: Array/Collection Indexing: Razor allows you to index into collections or arrays: Calling Methods: Razor also allows you to invoke methods: Notice how for all of the scenarios above how we did not have to explicitly end the code nugget.  Razor was able to implicitly identify the end of the code block for us. Razor’s Parsing Algorithm for Code Nuggets The below algorithm captures the core parsing logic we use to support “@” expressions within Razor, and to enable the implicit code nugget scenarios above: Parse an identifier - As soon as we see a character that isn't valid in a C# or VB identifier, we stop and move to step 2 Check for brackets - If we see "(" or "[", go to step 2.1., otherwise, go to step 3  Parse until the matching ")" or "]" (we track nested "()" and "[]" pairs and ignore "()[]" we see in strings or comments) Go back to step 2 Check for a "." - If we see one, go to step 3.1, otherwise, DO NOT ACCEPT THE "." as code, and go to step 4 If the character AFTER the "." is a valid identifier, accept the "." and go back to step 1, otherwise, go to step 4 Done! Differentiating between code and content Step 3.1 is a particularly interesting part of the above algorithm, and enables Razor to differentiate between scenarios where an identifier is being used as part of the code statement, and when it should instead be treated as static content: Notice how in the snippet above we have ? and ! characters at the end of our code nuggets.  These are both legal C# identifiers – but Razor is able to implicitly identify that they should be treated as static string content as opposed to being part of the code expression because there is whitespace after them.  This is pretty cool and saves us keystrokes. Explicit Code Nuggets in Razor Razor is smart enough to implicitly identify a lot of code nugget scenarios.  But there are still times when you want/need to be more explicit in how you scope the code nugget expression.  The @(expression) syntax allows you to do this: You can write any C#/VB code statement you want within the @() syntax.  Razor will treat the wrapping () characters as the explicit scope of the code nugget statement.  Below are a few scenarios where we could use the explicit code nugget feature: Perform Arithmetic Calculation/Modification: You can perform arithmetic calculations within an explicit code nugget: Appending Text to a Code Expression Result: You can use the explicit expression syntax to append static text at the end of a code nugget without having to worry about it being incorrectly parsed as code: Above we have embedded a code nugget within an <img> element’s src attribute.  It allows us to link to images with URLs like “/Images/Beverages.jpg”.  Without the explicit parenthesis, Razor would have looked for a “.jpg” property on the CategoryName (and raised an error).  By being explicit we can clearly denote where the code ends and the text begins. Using Generics and Lambdas Explicit expressions also allow us to use generic types and generic methods within code expressions – and enable us to avoid the <> characters in generics from being ambiguous with tag elements. One More Thing….Intellisense within Attributes We have used code nuggets within HTML attributes in several of the examples above.  One nice feature supported by the Razor code editor within Visual Studio is the ability to still get VB/C# intellisense when doing this. Below is an example of C# code intellisense when using an implicit code nugget within an <a> href=”” attribute: Below is an example of C# code intellisense when using an explicit code nugget embedded in the middle of a <img> src=”” attribute: Notice how we are getting full code intellisense for both scenarios – despite the fact that the code expression is embedded within an HTML attribute (something the existing .aspx code editor doesn’t support).  This makes writing code even easier, and ensures that you can take advantage of intellisense everywhere. Summary Razor enables a clean and concise templating syntax that enables a very fluid coding workflow.  Razor’s ability to implicitly scope code nuggets reduces the amount of typing you need to perform, and leaves you with really clean code. When necessary, you can also explicitly scope code expressions using a @(expression) syntax to provide greater clarity around your intent, as well as to disambiguate code statements from static markup. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • BNF – how to read syntax?

    - by Piotr Rodak
    A few days ago I read post of Jen McCown (blog) about her idea of blogging about random articles from Books Online. I think this is a great idea, even if Jen says that it’s not exciting or sexy. I noticed that many of the questions that appear on forums and other media arise from pure fact that people asking questions didn’t bother to read and understand the manual – Books Online. Jen came up with a brilliant, concise acronym that describes very well the category of posts about Books Online – RTFM365. I take liberty of tagging this post with the same acronym. I often come across questions of type – ‘Hey, i am trying to create a table, but I am getting an error’. The error often says that the syntax is invalid. 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT DEFAULT Guid_Default NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); 5 The answer is usually(1), ‘Ok, let me check it out.. Ah yes – you have to put name of the DEFAULT constraint before the type of constraint: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); Why many people stumble on syntax errors? Is the syntax poorly documented? No, the issue is, that correct syntax of the CREATE TABLE statement is documented very well in Books Online and is.. intimidating. Many people can be taken aback by the rather complex block of code that describes all intricacies of the statement. However, I don’t know better way of defining syntax of the statement or command. The notation that is used to describe syntax in Books Online is a form of Backus-Naur notatiion, called BNF for short sometimes. This is a notation that was invented around 50 years ago, and some say that even earlier, around 400 BC – would you believe? Originally it was used to define syntax of, rather ancient now, ALGOL programming language (in 1950’s, not in ancient India). If you look closer at the definition of the BNF, it turns out that the principles of this syntax are pretty simple. Here are a few bullet points: italic_text is a placeholder for your identifier <italic_text_in_angle_brackets> is a definition which is described further. [everything in square brackets] is optional {everything in curly brackets} is obligatory everything | separated | by | operator is an alternative ::= “assigns” definition to an identifier Yes, it looks like these six simple points give you the key to understand even the most complicated syntax definitions in Books Online. Books Online contain an article about syntax conventions – have you ever read it? Let’s have a look at fragment of the CREATE TABLE statement: 1 CREATE TABLE 2 [ database_name . [ schema_name ] . | schema_name . ] table_name 3 ( { <column_definition> | <computed_column_definition> 4 | <column_set_definition> } 5 [ <table_constraint> ] [ ,...n ] ) 6 [ ON { partition_scheme_name ( partition_column_name ) | filegroup 7 | "default" } ] 8 [ { TEXTIMAGE_ON { filegroup | "default" } ] 9 [ FILESTREAM_ON { partition_scheme_name | filegroup 10 | "default" } ] 11 [ WITH ( <table_option> [ ,...n ] ) ] 12 [ ; ] Let’s look at line 2 of the above snippet: This line uses rules 3 and 5 from the list. So you know that you can create table which has specified one of the following. just name – table will be created in default user schema schema name and table name – table will be created in specified schema database name, schema name and table name – table will be created in specified database, in specified schema database name, .., table name – table will be created in specified database, in default schema of the user. Note that this single line of the notation describes each of the naming schemes in deterministic way. The ‘optionality’ of the schema_name element is nested within database_name.. section. You can use either database_name and optional schema name, or just schema name – this is specified by the pipe character ‘|’. The error that user gets with execution of the first script fragment in this post is as follows: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'DEFAULT'. Ok, let’s have a look how to find out the correct syntax. Line number 3 of the BNF fragment above contains reference to <column_definition>. Since column_definition is in angle brackets, we know that this is a reference to notion described further in the code. And indeed, the very next fragment of BNF contains syntax of the column definition. 1 <column_definition> ::= 2 column_name <data_type> 3 [ FILESTREAM ] 4 [ COLLATE collation_name ] 5 [ NULL | NOT NULL ] 6 [ 7 [ CONSTRAINT constraint_name ] DEFAULT constant_expression ] 8 | [ IDENTITY [ ( seed ,increment ) ] [ NOT FOR REPLICATION ] 9 ] 10 [ ROWGUIDCOL ] [ <column_constraint> [ ...n ] ] 11 [ SPARSE ] Look at line 7 in the above fragment. It says, that the column can have a DEFAULT constraint which, if you want to name it, has to be prepended with [CONSTRAINT constraint_name] sequence. The name of the constraint is optional, but I strongly recommend you to make the effort of coming up with some meaningful name yourself. So the correct syntax of the CREATE TABLE statement from the beginning of the article is like this: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); That is practically everything you should know about BNF. I encourage you to study the syntax definitions for various statements and commands in Books Online, you can find really interesting things hidden there. Technorati Tags: SQL Server,t-sql,BNF,syntax   (1) No, my answer usually is a question – ‘What error message? What does it say?’. You’d be surprised to know how many people think I can go through time and space and look at their screen at the moment they received the error.

    Read the article

  • Understanding 400 Bad Request Exception

    - by imran_ku07
        Introduction:          Why I am getting this exception? What is the cause of this error. Developers are always curious to know the root cause of an exception, even though they found the solution from elsewhere. So what is the reason of this exception (400 Bad Request).The answer is security. Security is an important feature for any application. ASP.NET try to his best to give you more secure application environment as possible. One important security feature is related to URLs. Because there are various ways a hacker can try to access server resource. Therefore it is important to make your application as secure as possible. Fortunately, ASP.NET provides this security by throwing an exception of Bad Request whenever he feels. In this Article I am try to present when ASP.NET feels to throw this exception. You will also see some new ASP.NET 4 features which gives developers some control on this situation.   Description:   http.sys Restrictions:           It is interesting to note that after deploying your application on windows server that runs IIS 6 or higher, the first receptionist of HTTP request is the kernel mode HTTP driver: http.sys. Therefore for completing your request successfully you need to present your validity to http.sys and must pass the http.sys restriction.           Every http request URL must not contain any character from ASCII range of 0x00 to 0x1F, because they are not printable. These characters are invalid because these are invalid URL characters as defined in RFC 2396 of the IETF. But a question may arise that how it is possible to send unprintable character. The answer is that when you send your request from your application in binary format.           Another restriction is on the size of the request. A request containg protocal, server name, headers, query string information and individual headers sent along with the request must not exceed 16KB. Also individual header should not exceed 16KB.           Any individual path segment (the portion of the URL that does not include protocol, server name, and query string, for example, http://a/b/c?d=e,  here the b and c are individual path) must not contain more than 260 characters. Also http.sys disallows URLs that have more than 255 path segments.           If any of the above rules are not follow then you will get 400 Bad Request Exception. The reason for this restriction is due to hack attacks against web servers involve encoding the URL with different character representations.           You can change the default behavior enforced by http.sys using some Registry switches present at HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters    ASP.NET Restrictions:           After passing the restrictions enforced by the kernel mode http.sys then the request is handed off to IIS and then to ASP.NET engine and then again request has to pass some restriction from ASP.NET in order to complete it successfully.           ASP.NET only allows URL path lengths to 260 characters(only paths, for example http://a/b/c/d, here path is from a to d). This means that if you have long paths containing 261 characters then you will get the Bad Request exception. This is due to NTFS file-path limit.           Another restriction is that which characters can be used in URL path portion.You can use any characters except some characters because they are called invalid characters in path. Here are some of these invalid character in the path portion of a URL, <,>,*,%,&,:,\,?. For confirming this just right click on your Solution Explorer and Add New Folder and name this File to any of the above character, you will get the message. Files or folders cannot be empty strings nor they contain only '.' or have any of the following characters.....            For checking the above situation i have created a Web Application and put Default.aspx inside A%A folder (created from windows explorer), then navigate to, http://localhost:1234/A%25A/Default.aspx, what i get response from server is the Bad Request exception. The reason is that %25 is the % character which is invalid URL path character in ASP.NET. However you can use these characters in query string.           The reason for these restrictions are due to security, for example with the help of % you can double encode the URL path portion and : is used to get some specific resource from server.   New ASP.NET 4 Features:           It is worth to discuss the new ASP.NET 4 features that provides some control in the hand of developer. Previously we are restricted to 260 characters path length and restricted to not use some of characters, means these characters cannot become the part of the URL path segment.           You can configure maxRequestPathLength and maxQueryStringLength to allow longer or shorter paths and query strings. You can also customize set of invalid character using requestPathInvalidChars, under httpruntime element. This may be the good news for someone who needs to use some above character in their application which was invalid in previous versions. You can find further detail about new ASP.NET features about URL at here           Note that the above new ASP.NET settings will not effect http.sys. This means that you have pass the restriction of http.sys before ASP.NET ever come in to the action. Note also that previous restriction of http.sys is applied on individual path and maxRequestPathLength is applied on the complete path (the portion of the URL that does not include protocol, server name, and query string). For example, if URL is http://a/b/c/d?e=f, then maxRequestPathLength will takes, a/b/c/d, into account while http.sys will take a, b, c individually.   Summary:           Hopefully this will helps you to know how some of initial security features comes in to play, but i also recommend that you should read (at least first chapter called Initial Phases of a Web Request of) Professional ASP.NET 2.0 Security, Membership, and Role Management by Stefan Schackow. This is really a nice book.

    Read the article

  • Another Marketing Conference, part two – the afternoon

    - by Roger Hart
    In my previous post, I’ve covered the morning sessions at AMC2012. Here’s the rest of the write-up. I’ve skipped Charles Nixon’s session which was a blend of funky futurism and professional development advice, but you can see his slides here. I’ve also skipped the Google presentation, as it was a little thin on insight. 6 – Brand ambassadors: Getting universal buy in across the organisation, Vanessa Northam Slides are here This was the strongest enforcement of the idea that brand and campaign values need to be delivered throughout the organization if they’re going to work. Vanessa runs internal communications at e-on, and shared her experience of using internal comms to align an organization and thereby get the most out of a campaign. She views the purpose of internal comms as: “…to help leaders, to communicate the purpose and future of an organization, and support change.” This (and culture) primes front line staff, which creates customer experience and spreads brand. You ensure a whole organization knows what’s going on with both internal and external comms. If everybody is aligned and informed, if everybody can clearly articulate your brand and campaign goals, then you can turn everybody into an advocate. Alignment is a powerful tool for delivering a consistent experience and message. The pathological counter example is the one in which a marketing message goes out, which creates inbound customer contacts that front line contact staff haven’t been briefed to handle. The NatWest campaign was again mentioned in this context. The good example was e-on’s cheaper tariff campaign. Building a groundswell of internal excitement, and even running an internal launch meant everyone could contribute to a good customer experience. They found that meter readers were excited – not a group they’d considered as obvious in providing customer experience. But they were a group that has a lot of face-to-face contact with customers, and often were asked questions they may not have been briefed to answer. Being able to communicate a simple new message made it easier for them, and also let them become a sales and marketing asset to the organization. 7 – Goodbye Internet, Hello Outernet: the rise and rise of augmented reality, Matt Mills I wasn’t going to write this up, because it was essentially a sales demo for Aurasma. But the technology does merit some discussion. Basically, it replaces QR codes with visual recognition, and provides a simple-looking back end for attaching content. It’s quite sexy. But here’s my beef with it: QR codes had a clear visual language – when you saw one you knew what it was and what to do with it. They were clunky, but they had the “getting started” problem solved out of the box once you knew what you were looking at. However, they fail because QR code reading isn’t native to the platform. You needed an app, which meant you needed to know to download one. Consequentially, you can’t use QR codes with and ubiquity, or depend on them. This means marketers, content providers, etc, never pushed them, and they remained and awkward oddity, a minority sport. Aurasma half solves problem two, and re-introduces problem one, making it potentially half as useful as a QR code. It’s free, and you can apparently build it into your own apps. Add to that the likelihood of it becoming native to the platform if it takes off, and it may have legs. I guess we’ll see. 8 – We all need to code, Helen Mayor Great title – good point. If there was anybody in the room who didn’t at least know basic HTML, and if Helen’s presentation inspired them to learn, that’s fantastic. However, this was a half hour sales pitch for a basic coding training course. Beyond advocating coding skills it contained no useful content. Marketers may also like to consider some of these resources if they’re looking to learn code: Code Academy – free interactive tutorials Treehouse – learn web design, web dev, or app dev WebPlatform.org – tutorials and documentation for web tech  11 – Understanding our inner creativity, Margaret Boden This session was the most theoretical and probably least actionable of the day. It also held my attention utterly. Margaret spoke fluently, fascinatingly, without slides, on the subject of types of creativity and how they work. It was splendid. Yes, it raised a wry smile whenever she spoke of “the content of advertisements” and gave an example from 1970s TV ads, but even without the attempt to meet the conference’s theme this would have been thoroughly engaging. There are, Margaret suggested, three types of creativity: Combinatorial creativity The most common form, and consisting of synthesising ideas from existing and familiar concepts and tropes. Exploratory creativity Less common, this involves exploring the limits and quirks of a particular constraint or style. Transformational creativity This is uncommon, and arises from finding a way to do something that the existing rules would hold to be impossible. In essence, this involves breaking one of the constraints that exploratory creativity is composed from. Combinatorial creativity, she suggested, is particularly important for attaching favourable ideas to existing things. As such is it probably worth developing for marketing. Exploratory creativity may then come into play in something like developing and optimising an idea or campaign that now has momentum. Transformational creativity exists at the edges of this exploration. She suggested that products may often be transformational, but that marketing seemed unlikely to in her experience. This made me wonder about Listerine. Crucially, transformational creativity is characterised by there being some element of continuity with the strictures of previous thinking. Once it has happened, there may be  move from a revolutionary instance into an explored style. Again, from a marketing perspective, this seems to chime well with the thinking in Youngme Moon’s book: Different Talking about the birth of Modernism is visual art, Margaret pointed out that transformational creativity has historically risked a backlash, demanding what is essentially an education of the market. This is best accomplished by referring back to the continuities with the past in order to make the new familiar. Thoughts The afternoon is harder to sum up than the morning. It felt less concrete, and was troubled by a short run of poor presentations in the middle. Mainly, I found myself wrestling with the internal comms issue. It’s one of those things that seems astonishingly obvious in hindsight, but any campaign – particularly any large one – is doomed if the people involved can’t believe in it. We’ve run things here that haven’t gone so well, of course we have; who hasn’t? I’m not going to air any laundry, but people not being informed (much less aligned) feels like a common factor. It’s tough though. Managing and anticipating information needs across an organization of any size can’t be easy. Even the simple things like ensuring sales and support departments know what’s in a product release, and what messages go with it are easy to botch. The thing I like about framing this as a brand and campaign advocacy problem is that it makes it likely to get addressed. Better is always sexier than less-worse. Any technical communicator who’s ever felt crowded out by a content strategist or marketing copywriter  knows this – increasing revenue gets a seat at the table far more readily than reducing support costs, even if the financial impact is identical. So that’s it from AMC. The big thought-provokers were social buying behaviour and eliciting behaviour change, and the value of internal communications in ensuring successful campaigns and continuity of customer experience. I’ll be chewing over that for a while, and I’d definitely return next year.      

    Read the article

  • CodePlex Daily Summary for Thursday, March 11, 2010

    CodePlex Daily Summary for Thursday, March 11, 2010New ProjectsASP.NET Wiki Control: This ASP.NET user control allows you to embed a very useful wiki directly into your already existing ASP.NET website taking advantage of the popula...BabyLog: Log baby daily activity.buddyHome: buddyHome is a project that can make your home smarter. as good as your buddy. Cloud Community: Cloud Community makes it easier for organizations to have a simple to use community platform. Our mission is to create an easy to use community pl...Community Connectors for Microsoft CRM 4.0: Community Connectors for Microsoft CRM 4.0 allows Microsoft CRM 4.0 customers and partners to monitor and analyze customers’ interaction from their...Console Highlighter: Hightlights Microsoft Windows Command prompt (cmd.exe) by outputting ANSI VT100 Control sequences to color the output. These sequences are not hand...Cornell Store: This is IN NO WAY officially affiliated or related to the Cornell University store. Instead, this is a project that I am doing for a class. Ther...DevUtilities: This project is for creating some utility tools, and they will be useful during the development.DotNetNuke® Skin Maple: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by DyNNamite.co.uk. The package includes 4 color variations and sev...HRNet: HRNetIIS Web Site Monitoring: A software for monitor a particular web site on IIS, even if its IP is sharing between different web site.Iowa Code Camp: The source code for the Iowa Code Camp website.Leonidas: Leonidas is a virtual tutorLunch 'n Learn: The Lunch 'n Learn web application is an open source ASP.NET MVC application that allows you to setup lunch 'n learn presentations for your team, c...MNT Cryptography: A very simple cryptography classMooiNooi MVC2LINQ2SQL Web Databinder: mvc2linq2sql is a databinder for ASP.NET MVC that make able developer to clean bind object from HTML FORMS to Linq entities. Even 1 to N relations ...MoqBot: MoqBot is an auto mocking library for Moq and Ninject.mtExperience1: hoiMvcPager: MvcPager is a free paging component for ASP.NET MVC web application, it exposes a series of extension methods for using in ASP.NET MVC applications...OCal: OCal is based on object calisthenics to identify code smellsPex Custom Arithmetic Solver: Pex Custom Arithmetic Solver contains a collection of meta-heuristic search algorithms. The goal is to improve Pex's code coverage for code involvi...SetControls: Расширеные контролы для ASP.NET приложений. Полная информация ближе к релизу...shadowrage1597: CTC 195 Game Design classSharePoint Team-Mailer: A SharePoint 2007 solution that defines a generic CustomList for sending e-mails to SharePoint Groups.Sql Share: SQL Share is a collaboration tool used within the science to allow database engineers to work tightly with domain scientists.TechCalendar: Tech Events Calendar ASP.NET project.ZLYScript: A very simple script language compiler.New ReleasesALGLIB: ALGLIB 2.4.0: New ALGLIB release contains: improved versions of several linear algebra algorithms: QR decomposition, matrix inversion, condition number estimatio...AmiBroker Plug-Ins with C#: AmiBroker Plug-Ins v0.0.2: Source codes and a binaryAppFabric Caching UI Admin Tool: AppFabric Caching Beta 2 UI Admin Tool: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Test On:Win 7 (64x)Autodocs - WCF REST Automatic API Documentation Generator: Autodocs.ServiceModel.Web: This archive contains the reference DLL, instructions and license.Compact Plugs & Compact Injection: Compact Injection and Compact Plugs 1.1 Beta: First release of Compact Plugs (CP). The solution includes a simple example project of CP, called "TestCompactPlugs1". Also some fixes where made ...Console Highlighter: Console Highlighter 0.9 (preview release): Preliminary release.Encrypted Notes: Encrypted Notes 1.3: This is the latest version of Encrypted Notes (1.3). It has an installer - it will create a directory 'CPascoe' in My Documents. The last one was ...Family Tree Analyzer: Version 1.0.2: Family Tree Analyzer Version 1.0.2 This early beta version implements loading a gedcom file and displaying some basic reports. These reports inclu...FRC1103 - FRC Dashboard viewer: 2010 Documentation v0.1: This is my current version of the control system documentation for 2010. It isn't complete, but it has the information required for a custom dashbo...jQuery.cssLess: jQuery.cssLess 0.5 (Even less release): NEW - support for nested special CSS classes (like :hover) MAIN RELEASE This release, code "Even less", is the one that will interpret cssLess wit...MooiNooi MVC2LINQ2SQL Web Databinder: MooiNooi MVC2LINQ2SQL DataBinder: I didn't try this... I just took it off from my project. Please, tell me any problem implementing in your own development and I'll be pleased to h...MvcPager: MvcPager 1.2 for ASP.NET MVC 1.0: MvcPager 1.2 for ASP.NET MVC 1.0Mytrip.Mvc: Mytrip 1.0 preview 1: Article Manager Blog Manager L2S Membership(.NET Framework 3.5) EF Membership(.NET Framework 4) User Manager File Manager Localization Captcha ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.117: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version adds ...Pex Custom Arithmetic Solver: PexCustomArithmeticSolver: This is the alpha release containing the Alternating Variable Method and Evolution Strategies to try and solve constraints over floating point vari...Scrum Sprint Monitor: v1.0.0.44877: What is new in this release? Major performance increase in animations (up to 50 fps from 2 fps) by replacing DropShadow effect with png bitmaps; ...sELedit: sELedit v1.0b: + Added support for empty strings / wstrings + Fixed: critical bug in configuration files (list 53)sPWadmin: pwAdmin v0.9_nightly: + Fixed: XML editor can now open and save character templates + Added: PWI item name database + Added: Plugin SupportTechCalendar: Events Calendar v.1.0: Initial release.The Silverlight Hyper Video Player [http://slhvp.com]: Beta 2: Beta 2.0 Some fixes from Beta 1, and a couple small enhancements. Intensive testing continues, and I will continue to update the code at least ever...ThreadSafe.Caching: 2010.03.10.1: Updates to the scavanging behaviour since last release. Scavenging will now occur every 30 seconds by default and all objects in the cache will be ...VCC: Latest build, v2.1.30310.0: Automatic drop of latest buildVisual Studio DSite: Email Sender (C++): The same Email Sender program that I but made in visual c plus plus 2008 instead of visual basic 2008.Web Forms MVP: Web Forms MVP CTP7: The release can be considered stable, and is in use behind several high traffic, public websites. It has been marked as a CTP release as it is not ...White Tiger: 0.0.3.1: Now you can load or create files with whatever root element you want *check f or sets file permisionsMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesASP.NET Ajax LibraryMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsN2 CMSFasterflect - A Fast and Simple Reflection APIjQuery Library for SharePoint Web ServicesBlogEngine.NETFarseer Physics Enginepatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlight

    Read the article

  • SharePoint 2010 Replaceable Parameter, some observations…

    - by svdoever
    SharePoint Tools for Visual Studio 2010 provides a rudimentary mechanism for replaceable parameters that you can use in files that are not compiled, like ascx files and your project property settings. The basics on this can be found in the documentation at http://msdn.microsoft.com/en-us/library/ee231545.aspx. There are some quirks however. For example: My Package name is MacawMastSP2010Templates, as defined in my Package properties: I want to use the $SharePoint.Package.Name$ replaceable parameter in my feature properties. But this parameter does not work in the “Deployment Path” property, while other parameters work there, while it works in the “Image Url” property. It just does not get expanded. So I had to resort to explicitly naming the first path of the deployment path: : You also see a special property for the “Receiver Class” in the format $SharePoint.Type.<GUID>.FullName$. The documentation gives the following description:The full name of the type matching the GUID in the token. The format of the GUID is lowercase and corresponds to the Guid.ToString(“D”) format (that is, xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx). Not very clear. After some searching it happened to be the guid as declared in my feature receiver code: In other properties you see a different set of replaceable parameters: We use a similar mechanism for replaceable parameter for years in our Macaw Solutions Factory for SharePoint 2007 development, where each replaceable parameter is a PowerShell function. This provides so much more power. For example in a feature declaration we can say: Code Snippet <?xml version="1.0" encoding="utf-8" ?> <!-- Template expansion      [[ProductDependency]] -> Wss3 or Moss2007      [[FeatureReceiverAssemblySignature]] -> for example: Macaw.Mast.Wss3.Templates.SharePoint.Features, Version=1.0.0.0, Culture=neutral, PublicKeyToken=6e9d15db2e2a0be5      [[FeatureReceiverClass]] -> for example: Macaw.Mast.Wss3.Templates.SharePoint.Features.SampleFeature.FeatureReceiver.SampleFeatureFeatureReceiver --> <Feature Id="[[$Feature.SampleFeature.ID]]"   Title="MAST [[$MastSolutionName]] Sample Feature"   Description="The MAST [[$MastSolutionName]] Sample Feature, where all possible elements in a feature are showcased"   Version="1.0.0.0"   Scope="Site"   Hidden="FALSE"   ImageUrl="[[FeatureImage]]"   ReceiverAssembly="[[FeatureReceiverAssemblySignature]]"   ReceiverClass="[[FeatureReceiverClass]]"   xmlns="http://schemas.microsoft.com/sharepoint/">     <ElementManifests>         <ElementManifest Location="ExampleCustomActions.xml" />         <ElementManifest Location="ExampleSiteColumns.xml" />         <ElementManifest Location="ExampleContentTypes.xml" />         <ElementManifest Location="ExampleDocLib.xml" />         <ElementManifest Location="ExampleMasterPages.xml" />           <!-- Element files -->         [[GenerateXmlNodesForFiles -path 'ExampleDocLib\*.*' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]]         [[GenerateXmlNodesForFiles -path 'ExampleMasterPages\*.*' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]]         [[GenerateXmlNodesForFiles -path 'Resources\*.resx' -node 'ElementFile' -attributes @{Location = { RelativePathToExpansionSourceFile -path $_ }}]]     </ElementManifests> </Feature> We have a solution level PowerShell script file named TemplateExpansionConfiguration.ps1 where we declare our variables (starting with a $) and include helper functions: Code Snippet # ============================================================================================== # NAME: product:\src\Wss3\Templates\TemplateExpansionConfiguration.ps1 # # AUTHOR: Serge van den Oever, Macaw # DATE  : May 24, 2007 # # COMMENT: # Nota bene: define variable and function definitions global to be visible during template expansion. # # ============================================================================================== Set-PSDebug -strict -trace 0 #variables must have value before usage $global:ErrorActionPreference = 'Stop' # Stop on errors $global:VerbosePreference = 'Continue' # set to SilentlyContinue to get no verbose output   # Load template expansion utility functions . product:\tools\Wss3\MastDeploy\TemplateExpansionUtil.ps1   # If exists add solution expansion utility functions $solutionTemplateExpansionUtilFile = $MastSolutionDir + "\TemplateExpansionUtil.ps1" if ((Test-Path -Path $solutionTemplateExpansionUtilFile)) {     . $solutionTemplateExpansionUtilFile } # ==============================================================================================   # Expected: $Solution.ID; Unique GUID value identifying the solution (DON'T INCLUDE BRACKETS). # function: guid:UpperCaseWithoutCurlies -guid '{...}' ensures correct syntax $global:Solution = @{     ID = GuidUpperCaseWithoutCurlies -guid '{d366ced4-0b98-4fa8-b256-c5a35bcbc98b}'; }   #  DON'T INCLUDE BRACKETS for feature id's!!! # function: GuidUpperCaseWithoutCurlies -guid '{...}' ensures correct syntax $global:Feature = @{     SampleFeature = @{         ID = GuidUpperCaseWithoutCurlies -guid '{35de59f4-0c8e-405e-b760-15234fe6885c}';     } }   $global:SiteDefinition = @{     TemplateBlankSite = @{         ID = '12346';     } }   # To inherit from this content type add the delimiter (00) and then your own guid # ID: <base>00<newguid> $global:ContentType = @{     ExampleContentType = @{         ID = '0x01008e5e167ba2db4bfeb3810c4a7ff72913';     } }   #  INCLUDE BRACKETS for column id's and make them LOWER CASE!!! # function: GuidLowerCaseWithCurlies -guid '{...}' ensures correct syntax $global:SiteColumn = @{     ExampleChoiceField = @{         ID = GuidLowerCaseWithCurlies -guid '{69d38ce4-2771-43b4-a861-f14247885fe9}';     };     ExampleBooleanField = @{         ID = GuidLowerCaseWithCurlies -guid '{76f794e6-f7bd-490e-a53e-07efdf967169}';     };     ExampleDateTimeField = @{         ID = GuidLowerCaseWithCurlies -guid '{6f176e6e-22d2-453a-8dad-8ab17ac12387}';     };     ExampleNumberField = @{         ID = GuidLowerCaseWithCurlies -guid '{6026947f-f102-436b-abfd-fece49495788}';     };     ExampleTextField = @{         ID = GuidLowerCaseWithCurlies -guid '{23ca1c29-5ef0-4b3d-93cd-0d1d2b6ddbde}';     };     ExampleUserField = @{         ID = GuidLowerCaseWithCurlies -guid '{ee55b9f1-7b7c-4a7e-9892-3e35729bb1a5}';     };     ExampleNoteField = @{         ID = GuidLowerCaseWithCurlies -guid '{f9aa8da3-1f30-48a6-a0af-aa0a643d9ed4}';     }; } This gives so much more possibilities, like for example the elements file expansion where a PowerShell function iterates through a folder and generates the required XML nodes. I think I will bring back this mechanism, so it can work together with the built-in replaceable parameters, there are hooks to define you custom replacements as described by Waldek in this blog post.

    Read the article

  • What is SharePoint Out of the Box?

    - by Bil Simser
    It’s always fun in the blog-o-sphere and SharePoint bloggers always keep the pot boiling. Bjorn Furuknap recently posted a blog entry titled Why Out-of-the-Box Makes No Sense in SharePoint, quickly followed up by a rebuttal by Marc Anderson on his blog. Okay, now that we have all the players and the stage what’s the big deal? Bjorn started his post saying that you don’t use “out-of-the-box” (OOTB) SharePoint because it makes no sense. I have to disagree with his premise because what he calls OOTB is basically installing SharePoint and admiring it, but not using it. In his post he lays claim that modifying say the OOTB contacts list by removing (or I suppose adding) a column, now puts you in a situation where you’re no longer using the OOTB functionality. Really? Side note. Dear Internet, please stop comparing building software to building houses. Or comparing software architecture to building architecture. Or comparing web sites to making dinner. Are you trying to dumb down something so the general masses understand it? Comparing a technical skill to a construction operation isn’t the way to do this. Last time I checked, most people don’t know how to build houses and last time I checked people reading technical SharePoint blogs are generally technical people that understand the terms you use. Putting metaphors around software development to make it easy to understand is detrimental to the goal. </rant> Okay, where were we? Right, adding columns to lists means you are no longer using the OOTB functionality. Yeah, I still don’t get it. Another statement Bjorn makes is that using the OOTB functionality kills the flexibility SharePoint has in creating exactly what you want. IMHO this really flies in the absolute face of *where* SharePoint *really* shines. For the past year or so I’ve been leaning more and more towards OOTB solutions over custom development for the simple reason that its expensive to maintain systems and code and assets. SharePoint has enabled me to do this simply by providing the tools where I can give users what they need without cracking open up Visual Studio. This might be the fact that my day job is with a regulated company and there’s more scrutiny with spending money on anything new, but frankly that should be the position of any responsible developer, architect, manager, or PM. Do you really want to throw money away because some developer tells you that you need a custom web part when perhaps with some creative thinking or expectation setting with customers you can meet the need with what you already have. The way I read Bjorn’s terminology of “out-of-the-box” is install the software and tell people to go to a website and admire the OOTB system, but don’t change it! For those that know things like WordPress, DotNetNuke, SubText, Drupal or any of those content management/blogging systems, its akin to installing the software and setting up the “Hello World” blog post or page, then staring at it like it’s useful. “Yes, we are using WordPress!”. Then not adding a new post, creating a new category, or adding an About page. Perhaps I’m wrong in my interpretation. This leads us to what is OOTB SharePoint? To many people I’ve talked to the last few hours on twitter, email, etc. it is *not* just installing software but actually using it as it was fit for purpose. What’s the purpose of SharePoint then? It has many purposes, but using the OOTB templates Microsoft has given you the ability to collaborate on projects, author/share/publish documents, create pages, track items/contacts/tasks/etc. in a multi-user web based interface, and so on. Microsoft has pretty clear definitions of these different levels of SharePoint we’re talking about and I think it’s important for everyone to know what they are and what they mean. Personalization and Administration To me, this is the OOTB experience. You install the product and then are able to do things like create new lists, sites, edit and personalize pages, create new views, etc. Basically use the platform services available to you with Windows SharePoint Services (or SharePoint Foundation in 2010) to your full advantage. No code, no special tools needed, and very little user training required. Could you take someone who has never done anything in a website or piece of software and unleash them onto a site? Probably not. However I would argue that anyone who’s configured the Outlook reading layout or applied styles to a Word document probably won’t have too much difficulty in using SharePoint OUT OF THE BOX. Customization Here’s where things might get a bit murky but to me this is where you start looking at HTML/ASPX page code through SharePoint Designer, using jQuery scripts and plugging them into Web Part Pages via a Content Editor Web Part, and generally enhancing the site. The JavaScript debate might kick in here claiming it’s no different than C#, and frankly you can totally screw a site up with jQuery on a CEWP just as easily as you can with a C# delegate control deployed to the server file system. However (again, my blog, my opinion) the customization label comes in when I need to access the server (for example creating a custom theme) or have some kind of net-new element I add to the system that wasn’t there OOTB. It’s not content (like a new list or site), it’s code and does something functional. Development Here’s were the propeller hats come on and we’re talking algorithms and unit tests and compilers oh my. Software is deployed to the server, people are writing solutions after some kind of training (perhaps), there might be some specialized tools they use to craft and deploy the solutions, there’s the possibility of exceptions being thrown, etc. There are a lot of definitions here and just like customization it might get murky (do you let non-developers build solutions using development, i.e. jQuery/C#?). In my experience, it’s much more cost effective keeping solutions under the first two umbrellas than leaping into the third one. Arguably you could say that you can’t build useful solutions without *some* kind of code (even just some simple jQuery). I think you can get a *lot* of value just from using the OOTB experience and I don’t think you’re constraining your users that much. I’m not saying Marc or Bjorn are wrong. Like Obi-Wan stated, they’re both correct “from a certain point of view”. To me, SharePoint Out of the Box makes total sense and should not be dismissed. I just don’t agree with the premise that Bjorn is basing his statements on but that’s just my opinion and his is different and never the twain shall meet.

    Read the article

  • LLBLGen Pro feature highlights: grouping model elements

    - by FransBouma
    (This post is part of a series of posts about features of the LLBLGen Pro system) When working with an entity model which has more than a few entities, it's often convenient to be able to group entities together if they belong to a semantic sub-model. For example, if your entity model has several entities which are about 'security', it would be practical to group them together under the 'security' moniker. This way, you could easily find them back, yet they can be left inside the complete entity model altogether so their relationships with entities outside the group are kept. In other situations your domain consists of semi-separate entity models which all target tables/views which are located in the same database. It then might be convenient to have a single project to manage the complete target database, yet have the entity models separate of each other and have them result in separate code bases. LLBLGen Pro can do both for you. This blog post will illustrate both situations. The feature is called group usage and is controllable through the project settings. This setting is supported on all supported O/R mapper frameworks. Situation one: grouping entities in a single model. This situation is common for entity models which are dense, so many relationships exist between all sub-models: you can't split them up easily into separate models (nor do you likely want to), however it's convenient to have them grouped together into groups inside the entity model at the project level. A typical example for this is the AdventureWorks example database for SQL Server. This database, which is a single catalog, has for each sub-group a schema, however most of these schemas are tightly connected with each other: adding all schemas together will give a model with entities which indirectly are related to all other entities. LLBLGen Pro's default setting for group usage is AsVisualGroupingMechanism which is what this situation is all about: we group the elements for visual purposes, it has no real meaning for the model nor the code generated. Let's reverse engineer AdventureWorks to an entity model. By default, LLBLGen Pro uses the target schema an element is in which is being reverse engineered, as the group it will be in. This is convenient if you already have categorized tables/views in schemas, like which is the case in AdventureWorks. Of course this can be switched off, or corrected on the fly. When reverse engineering, we'll walk through a wizard which will guide us with the selection of the elements which relational model data should be retrieved, which we can later on use to reverse engineer to an entity model. The first step after specifying which database server connect to is to select these elements. below we can see the AdventureWorks catalog as well as the different schemas it contains. We'll include all of them. After the wizard completes, we have all relational model data nicely in our catalog data, with schemas. So let's reverse engineer entities from the tables in these schemas. We select in the catalog explorer the schemas 'HumanResources', 'Person', 'Production', 'Purchasing' and 'Sales', then right-click one of them and from the context menu, we select Reverse engineer Tables to Entity Definitions.... This will bring up the dialog below. We check all checkboxes in one go by checking the checkbox at the top to mark them all to be added to the project. As you can see LLBLGen Pro has already filled in the group name based on the schema name, as this is the default and we didn't change the setting. If you want, you can select multiple rows at once and set the group name to something else using the controls on the dialog. We're fine with the group names chosen so we'll simply click Add to Project. This gives the following result:   (I collapsed the other groups to keep the picture small ;)). As you can see, the entities are now grouped. Just to see how dense this model is, I've expanded the relationships of Employee: As you can see, it has relationships with entities from three other groups than HumanResources. It's not doable to cut up this project into sub-models without duplicating the Employee entity in all those groups, so this model is better suited to be used as a single model resulting in a single code base, however it benefits greatly from having its entities grouped into separate groups at the project level, to make work done on the model easier. Now let's look at another situation, namely where we work with a single database while we want to have multiple models and for each model a separate code base. Situation two: grouping entities in separate models within the same project. To get rid of the entities to see the second situation in action, simply undo the reverse engineering action in the project. We still have the AdventureWorks relational model data in the catalog. To switch LLBLGen Pro to see each group in the project as a separate project, open the Project Settings, navigate to General and set Group usage to AsSeparateProjects. In the catalog explorer, select Person and Production, right-click them and select again Reverse engineer Tables to Entities.... Again check the checkbox at the top to mark all entities to be added and click Add to Project. We get two groups, as expected, however this time the groups are seen as separate projects. This means that the validation logic inside LLBLGen Pro will see it as an error if there's e.g. a relationship or an inheritance edge linking two groups together, as that would lead to a cyclic reference in the code bases. To see this variant of the grouping feature, seeing the groups as separate projects, in action, we'll generate code from the project with the two groups we just created: select from the main menu: Project -> Generate Source-code... (or press F7 ;)). In the dialog popping up, select the target .NET framework you want to use, the template preset, fill in a destination folder and click Start Generator (normal). This will start the code generator process. As expected the code generator has simply generated two code bases, one for Person and one for Production: The group name is used inside the namespace for the different elements. This allows you to add both code bases to a single solution and use them together in a different project without problems. Below is a snippet from the code file of a generated entity class. //... using System.Xml.Serialization; using AdventureWorks.Person; using AdventureWorks.Person.HelperClasses; using AdventureWorks.Person.FactoryClasses; using AdventureWorks.Person.RelationClasses; using SD.LLBLGen.Pro.ORMSupportClasses; namespace AdventureWorks.Person.EntityClasses { //... /// <summary>Entity class which represents the entity 'Address'.<br/><br/></summary> [Serializable] public partial class AddressEntity : CommonEntityBase //... The advantage of this is that you can have two code bases and work with them separately, yet have a single target database and maintain everything in a single location. If you decide to move to a single code base, you can do so with a change of one setting. It's also useful if you want to keep the groups as separate models (and code bases) yet want to add relationships to elements from another group using a copy of the entity: you can simply reverse engineer the target table to a new entity into a different group, effectively making a copy of the entity. As there's a single target database, changes made to that database are reflected in both models which makes maintenance easier than when you'd have a separate project for each group, with its own relational model data. Conclusion LLBLGen Pro offers a flexible way to work with entities in sub-models and control how the sub-models end up in the generated code.

    Read the article

  • Finding a person in the forest

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery.   LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup.  Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully.   That’s all folks!

    Read the article

  • Dynamically creating a Generic Type at Runtime

    - by Rick Strahl
    I learned something new today. Not uncommon, but it's a core .NET runtime feature I simply did not know although I know I've run into this issue a few times and worked around it in other ways. Today there was no working around it and a few folks on Twitter pointed me in the right direction. The question I ran into is: How do I create a type instance of a generic type when I have dynamically acquired the type at runtime? Yup it's not something that you do everyday, but when you're writing code that parses objects dynamically at runtime it comes up from time to time. In my case it's in the bowels of a custom JSON parser. After some thought triggered by a comment today I realized it would be fairly easy to implement two-way Dictionary parsing for most concrete dictionary types. I could use a custom Dictionary serialization format that serializes as an array of key/value objects. Basically I can use a custom type (that matches the JSON signature) to hold my parsed dictionary data and then add it to the actual dictionary when parsing is complete. Generic Types at Runtime One issue that came up in the process was how to figure out what type the Dictionary<K,V> generic parameters take. Reflection actually makes it fairly easy to figure out generic types at runtime with code like this: if (arrayType.GetInterface("IDictionary") != null) { if (arrayType.IsGenericType) { var keyType = arrayType.GetGenericArguments()[0]; var valueType = arrayType.GetGenericArguments()[1]; … } } The GetArrayType method gets passed a type instance that is the array or array-like object that is rendered in JSON as an array (which includes IList, IDictionary, IDataReader and a few others). In my case the type passed would be something like Dictionary<string, CustomerEntity>. So I know what the parent container class type is. Based on the the container type using it's then possible to use GetGenericTypeArguments() to retrieve all the generic types in sequential order of definition (ie. string, CustomerEntity). That's the easy part. Creating a Generic Type and Providing Generic Parameters at RunTime The next problem is how do I get a concrete type instance for the generic type? I know what the type name and I have a type instance is but it's generic, so how do I get a type reference to keyvaluepair<K,V> that is specific to the keyType and valueType above? Here are a couple of things that come to mind but that don't work (and yes I tried that unsuccessfully first): Type elementType = typeof(keyvalue<keyType, valueType>); Type elementType = typeof(keyvalue<typeof(keyType), typeof(valueType)>); The problem is that this explicit syntax expects a type literal not some dynamic runtime value, so both of the above won't even compile. I turns out the way to create a generic type at runtime is using a fancy bit of syntax that until today I was completely unaware of: Type elementType = typeof(keyvalue<,>).MakeGenericType(keyType, valueType); The key is the type(keyvalue<,>) bit which looks weird at best. It works however and produces a non-generic type reference. You can see the difference between the full generic type and the non-typed (?) generic type in the debugger: The nonGenericType doesn't show any type specialization, while the elementType type shows the string, CustomerEntity (truncated above) in the type name. Once the full type reference exists (elementType) it's then easy to create an instance. In my case the parser parses through the JSON and when it completes parsing the value/object it creates a new keyvalue<T,V> instance. Now that I know the element type that's pretty trivial with: // Objects start out null until we find the opening tag resultObject = Activator.CreateInstance(elementType); Here the result object is picked up by the JSON array parser which creates an instance of the child object (keyvalue<K,V>) and then parses and assigns values from the JSON document using the types  key/value property signature. Internally the parser then takes each individually parsed item and adds it to a list of  List<keyvalue<K,V>> items. Parsing through a Generic type when you only have Runtime Type Information When parsing of the JSON array is done, the List needs to be turned into a defacto Dictionary<K,V>. This should be easy since I know that I'm dealing with an IDictionary, and I know the generic types for the key and value. The problem is again though that this needs to happen at runtime which would mean using several Convert.ChangeType() calls in the code to dynamically cast at runtime. Yuk. In the end I decided the easier and probably only slightly slower way to do this is a to use the dynamic type to collect the items and assign them to avoid all the dynamic casting madness: else if (IsIDictionary) { IDictionary dict = Activator.CreateInstance(arrayType) as IDictionary; foreach (dynamic item in items) { dict.Add(item.key, item.value); } return dict; } This code creates an instance of the generic dictionary type first, then loops through all of my custom keyvalue<K,V> items and assigns them to the actual dictionary. By using Dynamic here I can side step all the explicit type conversions that would be required in the three highlighted areas (not to mention that this nested method doesn't have access to the dictionary item generic types here). Static <- -> Dynamic Dynamic casting in a static language like C# is a bitch to say the least. This is one of the few times when I've cursed static typing and the arcane syntax that's required to coax types into the right format. It works but it's pretty nasty code. If it weren't for dynamic that last bit of code would have been a pretty ugly as well with a bunch of Convert.ChangeType() calls to litter the code. Fortunately this type of type convulsion is rather rare and reserved for system level code. It's not every day that you create a string to object parser after all :-)© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  CSharp   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Using Radio Button in GridView with Validation

    - by Vincent Maverick Durano
    A developer is asking how to select one radio button at a time if the radio button is inside the GridView.  As you may know setting the group name attribute of radio button will not work if the radio button is located within a Data Representation control like GridView. This because the radio button inside the gridview bahaves differentely. Since a gridview is rendered as table element , at run time it will assign different "name" to each radio button. Hence you are able to select multiple rows. In this post I'm going to demonstrate how select one radio button at a time in gridview and add a simple validation on it. To get started let's go ahead and fire up visual studio and the create a new web application / website project. Add a WebForm and then add gridview. The mark up would look something like this: <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="false" > <Columns> <asp:TemplateField> <ItemTemplate> <asp:RadioButton ID="rb" runat="server" /> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> <asp:BoundField DataField="Col1" HeaderText="First Column" /> <asp:BoundField DataField="Col2" HeaderText="Second Column" /> </Columns> </asp:GridView> Noticed that I've added a templatefield column so that we can add the radio button there. Also I have set up some BoundField columns and set the DataFields as RowNumber, Col1 and Col2. These columns are just dummy columns and i used it for the simplicity of this example. Now where these columns came from? These columns are created by hand at the code behind file of the ASPX. Here's the code below: private DataTable FillData() { DataTable dt = new DataTable(); DataRow dr = null; //Create DataTable columns dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); dt.Columns.Add(new DataColumn("Col1", typeof(string))); dt.Columns.Add(new DataColumn("Col2", typeof(string))); //Create Row for each columns dr = dt.NewRow(); dr["RowNumber"] = 1; dr["Col1"] = "A"; dr["Col2"] = "B"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 2; dr["Col1"] = "AA"; dr["Col2"] = "BB"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 3; dr["Col1"] = "A"; dr["Col2"] = "B"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 4; dr["Col1"] = "A"; dr["Col2"] = "B"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 5; dr["Col1"] = "A"; dr["Col2"] = "B"; dt.Rows.Add(dr); return dt; } And here's the code for binding the GridView with the dummy data above. protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { GridView1.DataSource = FillData(); GridView1.DataBind(); } } Okay we have now a GridView data with a radio button on each row. Now lets go ahead and switch back to ASPX mark up. In this example I'm going to use a JavaScript for validating the radio button to select one radio button at a time. Here's the javascript code below: function CheckOtherIsCheckedByGVID(rb) { var isChecked = rb.checked; var row = rb.parentNode.parentNode; if (isChecked) { row.style.backgroundColor = '#B6C4DE'; row.style.color = 'black'; } var currentRdbID = rb.id; parent = document.getElementById("<%= GridView1.ClientID %>"); var items = parent.getElementsByTagName('input'); for (i = 0; i < items.length; i++) { if (items[i].id != currentRdbID && items[i].type == "radio") { if (items[i].checked) { items[i].checked = false; items[i].parentNode.parentNode.style.backgroundColor = 'white'; items[i].parentNode.parentNode.style.color = '#696969'; } } } } The function above sets the row of the current selected radio button's style to determine that the row is selected and then loops through the radio buttons in the gridview and then de-select the previous selected radio button and set the row style back to its default. You can then call the javascript function above at onlick event of radio button like below: <asp:RadioButton ID="rb" runat="server" onclick="javascript:CheckOtherIsCheckedByGVID(this);" /> Here's the output below: On Load: After Selecting a Radio Button: As you have noticed, on initial load there's no default selected radio in the GridView. Now let's add a simple validation for that. We will basically display an error message if a user clicks a button that triggers a postback without selecting  a radio button in the GridView. Here's the javascript for the validation: function ValidateRadioButton(sender, args) { var gv = document.getElementById("<%= GridView1.ClientID %>"); var items = gv.getElementsByTagName('input'); for (var i = 0; i < items.length ; i++) { if (items[i].type == "radio") { if (items[i].checked) { args.IsValid = true; return; } else { args.IsValid = false; } } } } The function above loops through the rows in gridview and find all the radio buttons within it. It will then check each radio button checked property. If a radio is checked then set IsValid to true else set it to false.  The reason why I'm using IsValid is because I'm using the ASP validator control for validation. Now add the following mark up below under the GridView declaration: <br /> <asp:Label ID="lblMessage" runat="server" /> <br /> <asp:Button ID="btn" runat="server" Text="POST" onclick="btn_Click" ValidationGroup="GroupA" /> <asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="Please select row in the grid." ClientValidationFunction="ValidateRadioButton" ValidationGroup="GroupA" style="display:none"></asp:CustomValidator> <asp:ValidationSummary ID="ValidationSummary1" runat="server" ValidationGroup="GroupA" HeaderText="Error List:" DisplayMode="BulletList" ForeColor="Red" /> And then at Button Click event add this simple code below just to test if  the validation works: protected void btn_Click(object sender, EventArgs e) { lblMessage.Text = "Postback at: " + DateTime.Now.ToString("hh:mm:ss tt"); } Here's the output below that you can see in the browser:   That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,JavaScript,GridView

    Read the article

  • CDN on Hosted Service in Windows Azure

    - by Shaun
    Yesterday I told Wang Tao, an annoying colleague sitting beside me, about how to make the static content enable the CDN in his website which had just been published on Windows Azure. The approach would be Move the static content, the images, CSS files, etc. into the blob storage. Enable the CDN on his storage account. Change the URL of those static files to the CDN URL. I think these are the very common steps when using CDN. But this morning I found that the new Windows Azure SDK 1.4 and new Windows Azure Developer Portal had just been published announced at the Windows Azure Blog. One of the new features in this release is about the CDN, which means we can enabled the CDN not only for a storage account, but a hosted service as well. Within this new feature the steps I mentioned above would be turned simpler a lot.   Enable CDN for Hosted Service To enable the CDN for a hosted service we just need to log on the Windows Azure Developer Portal. Under the “Hosted Services, Storage Accounts & CDN” item we will find a new menu on the left hand side said “CDN”, where we can manage the CDN for storage account and hosted service. As we can see the hosted services and storage accounts are all listed in my subscriptions. To enable a CDN for a hosted service is veru simple, just select a hosted service and click the New Endpoint button on top. In this dialog we can select the subscription and the storage account, or the hosted service we want the CDN to be enabled. If we selected the hosted service, like I did in the image above, the “Source URL for the CDN endpoint” will be shown automatically. This means the windows azure platform will make all contents under the “/cdn” folder as CDN enabled. But we cannot change the value at the moment. The following 3 checkboxes next to the URL are: Enable CDN: Enable or disable the CDN. HTTPS: If we need to use HTTPS connections check it. Query String: If we are caching content from a hosted service and we are using query strings to specify the content to be retrieved, check it. Just click the “Create” button to let the windows azure create the CDN for our hosted service. The CDN would be available within 60 minutes as Microsoft mentioned. My experience is that about 15 minutes the CDN could be used and we can find the CDN URL in the portal as well.   Put the Content in CDN in Hosted Service Let’s create a simple windows azure project in Visual Studio with a MVC 2 Web Role. When we created the CDN mentioned above the source URL of CDN endpoint would be under the “/cdn” folder. So in the Visual Studio we create a folder under the website named “cdn” and put some static files there. Then all these files would be cached by CDN if we use the CDN endpoint. The CDN of the hosted service can cache some kind of “dynamic” result with the Query String feature enabled. We create a controller named CdnController and a GetNumber action in it. The routed URL of this controller would be /Cdn/GetNumber which can be CDN-ed as well since the URL said it’s under the “/cdn” folder. In the GetNumber action we just put a number value which specified by parameter into the view model, then the URL could be like /Cdn/GetNumber?number=2. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6:  7: namespace MvcWebRole1.Controllers 8: { 9: public class CdnController : Controller 10: { 11: // 12: // GET: /Cdn/ 13:  14: public ActionResult GetNumber(int number) 15: { 16: return View(number); 17: } 18:  19: } 20: } And we add a view to display the number which is super simple. 1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<int>" %> 2:  3: <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> 4: GetNumber 5: </asp:Content> 6:  7: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 8:  9: <h2>The number is: <% 1: : Model.ToString() %></h2> 10:  11: </asp:Content> Since this action is under the CdnController the URL would be under the “/cdn” folder which means it can be CDN-ed. And since we checked the “Query String” the content of this dynamic page will be cached by its query string. So if I use the CDN URL, http://az25311.vo.msecnd.net/GetNumber?number=2, the CDN will firstly check if there’s any content cached with the key “GetNumber?number=2”. If yes then the CDN will return the content directly; otherwise it will connect to the hosted service, http://aurora-sys.cloudapp.net/Cdn/GetNumber?number=2, and then send the result back to the browser and cached in CDN. But to be notice that the query string are treated as string when used by the key of CDN element. This means the URLs below would be cached in 2 elements in CDN: http://az25311.vo.msecnd.net/GetNumber?number=2&page=1 http://az25311.vo.msecnd.net/GetNumber?page=1&number=2 The final step is to upload the project onto azure. Test the Hosted Service CDN After published the project on azure, we can use the CDN in the website. The CDN endpoint we had created is az25311.vo.msecnd.net so all files under the “/cdn” folder can be requested with it. Let’s have a try on the sample.htm and c_great_wall.jpg static files. Also we can request the dynamic page GetNumber with the query string with the CDN endpoint. And if we refresh this page it will be shown very quickly since the content comes from the CDN without MCV server side process. We style of this page was missing. This is because the CSS file was not includes in the “/cdn” folder so the page cannot retrieve the CSS file from the CDN URL.   Summary In this post I introduced the new feature in Windows Azure CDN with the release of Windows Azure SDK 1.4 and new Developer Portal. With the CDN of the Hosted Service we can just put the static resources under a “/cdn” folder so that the CDN can cache them automatically and no need to put then into the blob storage. Also it support caching the dynamic content with the Query String feature. So that we can cache some parts of the web page by using the UserController and CDN. For example we can cache the log on user control in the master page so that the log on part will be loaded super-fast. There are some other new features within this release you can find here. And for more detailed information about the Windows Azure CDN please have a look here as well.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Wrapping ASP.NET Client Callbacks

    - by Ricardo Peres
    Client Callbacks are probably the less known (and I dare say, less loved) of all the AJAX options in ASP.NET, which also include the UpdatePanel, Page Methods and Web Services. The reason for that, I believe, is it’s relative complexity: Get a reference to a JavaScript function; Dynamically register function that calls the above reference; Have a JavaScript handler call the registered function. However, it has some the nice advantage of being self-contained, that is, doesn’t need additional files, such as web services, JavaScript libraries, etc, or static methods declared on a page, or any kind of attributes. So, here’s what I want to do: Have a DOM element which exposes a method that is executed server side, passing it a string and returning a string; Have a server-side event that handles the client-side call; Have two client-side user-supplied callback functions for handling the success and error results. I’m going to develop a custom control without user interface that does the registration of the client JavaScript method as well as a server-side event that can be hooked by some handler on a page. My markup will look like this: 1: <script type="text/javascript"> 1:  2:  3: function onCallbackSuccess(result, context) 4: { 5: } 6:  7: function onCallbackError(error, context) 8: { 9: } 10:  </script> 2: <my:CallbackControl runat="server" ID="callback" SendAllData="true" OnCallback="OnCallback"/> The control itself looks like this: 1: public class CallbackControl : Control, ICallbackEventHandler 2: { 3: #region Public constructor 4: public CallbackControl() 5: { 6: this.SendAllData = false; 7: this.Async = true; 8: } 9: #endregion 10:  11: #region Public properties and events 12: public event EventHandler<CallbackEventArgs> Callback; 13:  14: [DefaultValue(true)] 15: public Boolean Async 16: { 17: get; 18: set; 19: } 20:  21: [DefaultValue(false)] 22: public Boolean SendAllData 23: { 24: get; 25: set; 26: } 27:  28: #endregion 29:  30: #region Protected override methods 31:  32: protected override void Render(HtmlTextWriter writer) 33: { 34: writer.AddAttribute(HtmlTextWriterAttribute.Id, this.ClientID); 35: writer.RenderBeginTag(HtmlTextWriterTag.Span); 36:  37: base.Render(writer); 38:  39: writer.RenderEndTag(); 40: } 41:  42: protected override void OnInit(EventArgs e) 43: { 44: String reference = this.Page.ClientScript.GetCallbackEventReference(this, "arg", "onCallbackSuccess", "context", "onCallbackError", this.Async); 45: String script = String.Concat("\ndocument.getElementById('", this.ClientID, "').callback = function(arg, context, onCallbackSuccess, onCallbackError){", ((this.SendAllData == true) ? "__theFormPostCollection.length = 0; __theFormPostData = ''; WebForm_InitCallback(); " : String.Empty), reference, ";};\n"); 46:  47: this.Page.ClientScript.RegisterStartupScript(this.GetType(), String.Concat("callback", this.ClientID), script, true); 48:  49: base.OnInit(e); 50: } 51:  52: #endregion 53:  54: #region Protected virtual methods 55: protected virtual void OnCallback(CallbackEventArgs args) 56: { 57: EventHandler<CallbackEventArgs> handler = this.Callback; 58:  59: if (handler != null) 60: { 61: handler(this, args); 62: } 63: } 64:  65: #endregion 66:  67: #region ICallbackEventHandler Members 68:  69: String ICallbackEventHandler.GetCallbackResult() 70: { 71: CallbackEventArgs args = new CallbackEventArgs(this.Context.Items["Data"] as String); 72:  73: this.OnCallback(args); 74:  75: return (args.Result); 76: } 77:  78: void ICallbackEventHandler.RaiseCallbackEvent(String eventArgument) 79: { 80: this.Context.Items["Data"] = eventArgument; 81: } 82:  83: #endregion 84: } And the event argument class: 1: [Serializable] 2: public class CallbackEventArgs : EventArgs 3: { 4: public CallbackEventArgs(String argument) 5: { 6: this.Argument = argument; 7: this.Result = String.Empty; 8: } 9:  10: public String Argument 11: { 12: get; 13: private set; 14: } 15:  16: public String Result 17: { 18: get; 19: set; 20: } 21: } You will notice two properties on the CallbackControl: Async: indicates if the call should be made asynchronously or synchronously (the default); SendAllData: indicates if the callback call will include the view and control state of all of the controls on the page, so that, on the server side, they will have their properties set when the Callback event is fired. The CallbackEventArgs class exposes two properties: Argument: the read-only argument passed to the client-side function; Result: the result to return to the client-side callback function, set from the Callback event handler. An example of an handler for the Callback event would be: 1: protected void OnCallback(Object sender, CallbackEventArgs e) 2: { 3: e.Result = String.Join(String.Empty, e.Argument.Reverse()); 4: } Finally, in order to fire the Callback event from the client, you only need this: 1: <input type="text" id="input"/> 2: <input type="button" value="Get Result" onclick="document.getElementById('callback').callback(callback(document.getElementById('input').value, 'context', onCallbackSuccess, onCallbackError))"/> The syntax of the callback function is: arg: some string argument; context: some context that will be passed to the callback functions (success or failure); callbackSuccessFunction: some function that will be called when the callback succeeds; callbackFailureFunction: some function that will be called if the callback fails for some reason. Give it a try and see if it helps!

    Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >