Search Results

Search found 13261 results on 531 pages for 'confused developer'.

Page 351/531 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• What location to put bootloader, when running multiple drives and partition

  - by Matt G

  I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

  Read the article

• TechEd 2012: Windows 8 And Metro

  - by Tim Murphy

  Windows 8 is here (or at least very close) and that was the main feature of this morning’s key note.  Antoine LeBlond started off by apologizing to the IT professionals since he planned on showing code.  I’m not sure if IT Pros are that easily confused or why you would need such a disclaimer.  Developers do real work, IT Pros just play with toys (just kidding). The highlights of the Windows 8 keynote for me started with some of the UI design elements that I had not seen when I was shown one of the Build tablets.  Specifically I liked the AppBar features that we have become used to with Windows Phone and some of the gesture features.  Even though they have been available on other platforms before I think Microsoft really got them right. Two other great features of Windows 8 that they demonstrated were the Hyper-V capabilities and the ability to run Windows 8 anywhere from a USB key.  My jaw dropped through the floor seeing a feature rich OS boot off of a thumb drive. WOW!  I also can’t wait to get rid of dual booting just to run Hyper-V images when developing. The morning continued with a session on Metro XAML development with Tim Heuer.  While included a lot of great XAML Metro demos, I was pleasantly surprised by some of the things I found out about Visual Studio 2012.  Finding out that Blend is now integrated with VS2012 was a nice addition after working with them as separate applications was an encouraging start. Moving on to Metro he introduced the nugget that WinRT is Async everywhere.  How deep this model goes will be an interesting thing to find out as I learn more about developing for the platform.  Thankfully he followed that up with a couple of new keywords, await and async, that eliminates a lot of plumbing that has been required in the past for asynchronous transactions. Tim also related that since the Metro framework is relatively small and most apps will use a significant amount of it the entire surface is referenced by default.  This is a contrast to adding namespace and assemblies one after another as we normally do. This was such a power packed session that I can’t detail it all here so here is the teaser list. New icons in VS2012 for extension methods Emulator/simulator testing features for gestures Portable class libraries XAML no longer managed code And so much more …   del.icio.us Tags: Windows 8,Metro,Tim Heuer,XAML,Widows Phone,Hyper-V,Antoine LeBlond,TechEd,TechEd 2012,Visual Studio 2012,Visual Studio

  Read the article

• Ideas for time-keeping in a webbased RPG?

  - by ashy_32bit

  I'm assigned a task of doing the preliminary research stuff for a web-based MMO RPG. Now my buggiest problem here is "web based" vs "MMO RPG". I did some research about time keeping systems and I'm totally confused as how exactly something as real-time as an MMO-RPG can work on some pull-only (unidirectional) platform like HTTP. I know there is also a turn-based alternative to time keeping but can it work in an MMO setting ? EDIT: Take a battle for example, player A (human) wants to attack Player B (also human) in the open. How does it work when when player A issues the "attack" command on player B ? how do I inform player B that he is being attacked ? and then how exactly the battle goes on between the two in an HTTP based communication channel? To my knowledge this is impossible unless you resort to another technology (HTML is 1-way, that is you can just ask server and get response, server can't update you unless being asked to. this is very well-known and simply explained). So I though maybe I can somehow change the whole timekeeping model from real-time to a more non-real-time model (towards a turn based RPG for example) and somehow work around the whole problem of "interactivity". EDIT2: It is not that I don't wanna use any server side technologies. For sure it is not gonna work client-side-only even for the most trivial of the multi-player games, let alone an RPG. So sure there would be a (probably complex) server side component to it (the so called Game Engine I suppose). The problem is not the technology that implements the logic (game mechanics) bits but the communication technology and how it limits the game mechanics abilities (like how real-time or turn based it is gonna be). HTTP is a request-response protocol meaning you get served only if you ask for it (explicitly send a GET or POST request to the server). HTTP server can not inform you if anything of interest happens in the game world unless you refresh the page (as some suggested) or you use some bi-directional tech (totally different animals) like Flash, WebSock, HTML5 etc etc. So maybe the question is: Is it possible to implement a MMORPG using only HTML5/PHP and no periodic page refreshes? if so what would be rules to make it an MMO-RPG? Can't explain it any clearer. Sorry :D

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• How do I take responsibility for my code when colleague makes unnecessary improvements without notice?

  - by Jesslyn

  One of my teammates is a jack of all trades in our IT shop and I respect his insight. However, sometimes he reviews my code (he's second in command to our team leader, so that's expected) without a heads up. So sometimes he reviews my changes before they complete the end goal and makes changes right away... and has even broken my work once. Other times, he has made unnecessary improvements to some of my code that is 3+ months old. This annoys me for a few reasons: I am not always given a chance to fix my mistakes He has not taken the time to ask me what I was trying to accomplish when he is confused, which could affect his testing or changes I don't always think his code is readable Deadlines are not an issue and his current workload doesn't require any work in my projects other than reviewing my code changes. Anyways, I have told him in the past to please keep me posted if he sees something in my work that he wants to change so that I could take ownership of my code (maybe I should have said "shortcomings") and he's not been responsive. I fear that I may come off as aggressive when I ask him to explain his changes to me. He's just a quiet person who keeps to himself, but his actions continue. I don't want to banish him from making code changes (not like I could), because we are a team--but I want to do my part to help our team. Added clarifications: We share 1 development branch. I do not wait until all my changes complete a single task because I risk losing some significant work--so I make sure my changes build and do not break anything. My concern is that my teammate doesn't explain the reason or purpose behind his changes. I don't think he should need my blessing, but if we disagree on an approach I thought it would be best to discuss the pros and cons and make a decision once we both understand what is going on. I have not discussed this with our team lead yet as I would prefer to resolve personal disagreements without getting management involved unless it is necessary. Since my concern seemed more of personal issue than a threat to our work, I chose to not bother the team lead. I am working on code review process ideas--to help promote the benefits of more organized code reviews without making it all about my pet peeves.

  Read the article

• [JAVA]How to make my Oracle update/insert action through JAVA faster?

  - by gunbuster363

  [JAVA]How to make my Oracle update/insert action through JAVA faster? Hi everyone, I am facing a problem in my company that is - our program's speed is not fast enough. To be more specific, we are telecommunication company and this program handle call/internet serfing transaction made by every mobile phone users in our city. Because the amount of download content made by the iphone users is just too much, our program cannot handle them fast enough. The situation is, the amount of transaction made by users are double of the transaction processed by our program. Most of the running time of the program are dominated by DB transactions. I've search through the internet and browsed some sites ( for example: http://www.javaperformancetuning.com/tips/rawtips.shtml ) talking about java performace in DB, but I cannot find a suggestion suitable for us. these advices are not applicable/already used, for instance: 1)Use prepared statements. Use parametrized SQL Already used prepared statement. Each time will use different parameter by clear parameters and set parameters. 2)Tune the SQL to minimize the data returned (e.g. not 'SELECT *'). Sure, already used. 3)Use connection pooling. We hold a single connection during the program's execution. And I doubt that pooling cannot solve the problem because our program act as 1 user, so there are no problem for concurrent access to DB. If anyone of you think pooling is good, please tell me why. Thanks. 4)Try to combine queries and batch updates. Cannot do it. Every query/insert/update is depend on the database's information. For example, we look up the DB for the client's information, if we cannot find his usage, we insert the usage into DB, otherwise we do update. 5)Close resources (Connections, Statements, ResultSets) when finished Sure. 6)Select the fastest JDBC driver. I don't know. I've search on the internet about the type of driver available and I am very confused. We use oracle.jdbc.driver.OracleDriver and we use thin instead of oci, that's all I know. In addition, our program is a two-tier way ( java <- oracle ) 7)turn off auto-commit already done that. Looking forwards to any helps, thank you very much.

  Read the article

• What are the differences between abstract classes, interfaces, and when to use them

  - by user66662

  Recently I have started to wrap my head around OOP, and I am now to the point where the more I read about the differences between Abstract classes and Interfaces the more confused I become. So far, neither can be instantiated. Interfaces are more or less structural blueprints that determine the skeleton and abstracts are different by being able to partially develop code. I would like to learn more about these through my specific situation. Here is a link to my first question if you would like a little more background information: What is a good design model for my new class? Here are two classes I created: class Ad { $title; $description $price; function get_data($website){ } function validate_price(){ } } class calendar_event { $title; $description $start_date; function get_data($website){ //guts } function validate_dates(){ //guts } } So, as you can see these classes are almost identical. Not shown here, but there are other functions, like get_zip(), save_to_database() that are common across my classes. I have also added other classes Cars and Pets which have all the common methods and of course properties specific to those objects (mileage, weight, for example). Now I have violated the DRY principle and I am managing and changing the same code across multiple files. I intend on having more classes like boats, horses, or whatever. So is this where I would use an interface or abstract class? From what I understand about abstract classes I would use a super class as a template with all of the common elements built into the abstract class, and then add only the items specifically needed in future classes. For example: abstract class content { $title; $description function get_data($website){ } function common_function2() { } function common_function3() { } } class calendar_event extends content { $start_date; function validate_dates(){ } } Or would I use an interface and, because these are so similar, create a structure that each of the subclasses are forced to use for integrity reasons, and leave it up to the end developer who fleshes out that class to be responsible for each of the details of even the common functions. my thinking there is that some 'common' functions may need to be tweaked in the future for the needs of their specific class. Despite all that above, if you believe I am misunderstanding the what and why of abstracts and interfaces altogether, by all means let a valid answer to be stop thinking in this direction and suggest the proper way to move forward! Thanks!

  Read the article

• Image first loaded, then it isn't? (XNA)

  - by M0rgenstern

  I am very confused at the Moment. I have the following Class: (Just a part of the class): public class GUIWindow { #region Static Fields //The standard image for windows. public static IngameImage StandardBackgroundImage; #endregion } IngameImage is just one of my own classes, but actually it contains a Texture2D (and some other things). In another class I load a list of GUIButtons by deserializing a XML file. public static GUI Initializazion(string pXMLPath, ContentManager pConMan) { GUI myGUI = pConMan.Load<GUI>(pXMLPath); GUIWindow.StandardBackgroundImage = new IngameImage(pConMan.Load<Texture2D>(myGUI.WindowStandardBackgroundImagePath), Vector2.Zero, 1024, 600, 1, 0, Color.White, 1.0f, true, false, false); System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); myGUI.Windows = pConMan.Load<List<GUIWindow>>(myGUI.GUIFormatXMLPath); System.Console.WriteLine("Windows loaded"); return myGUI; } Here this line: System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Prints "true". To load the GUIWindows I need an "empty" constructor, which looks like that: public GUIWindow() { Name = ""; Buttons = new List<Button>(); ImagePath = ""; System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); //Image = new IngameImage(StandardBackgroundImage); //System.Console.WriteLine( //Image.IsActive = false; SelectedButton = null; IsActive = false; } As you can see, I commented lines out in the constructor. Because: Otherwise this would crash. Here the line System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Doesn't print anything, it just crashes with the following errormessage: Building content threw NullReferenceException: Object reference not set to an object instance. Why does this happen? Before the program wants to load the List, it prints "true". But in the constructor, so in the loading of the list it prints "false". Can anybody please tell me why this happens and how to fix it?

  Read the article

• need some concrete examples on user stories, tasks and how they relate to functional and technical specifications

  - by gideon

  Little heads up, Im the only lonely dev building/planning/mocking my project as I go. Ive come up with a preview release that does only the core aspects of the system, with good business value and I've coded most of the UI as dirty throw-able mockups over nicely abstracted and very minimal base code. In the end I know quite well what my clients want on the whole. I can't take agile-ish cowboying anymore because Im completely dis-organized and have no paper plan and since my clients are happy, things are getting more complex with more features and ideas. So I started using and learning Agile & Scrum Here are my problems: I know what a functional spec is.(sample): Do all user stories and/or scenarios become part of the functional spec? I know what user stories and tasks are. Are these kinda user stories? I dont see any Business Value reason added to them. I made a mind map using freemind, I had problems like this: Actor : Finance Manager Can Add a Financial Plan into the system because well thats the point of it? What Business Value reason do I add for things like this? Example : A user needs to be able to add a blog article (in the blogger app) because..?? Its the point of a blogger app, it centers around that feature? How do I go into the finer details and system definitions: Actor: Finance Manager Action: Adds a finance plan. This adding is a complicated process with lots of steps. What User Story will describe what a finance plan in the system is ?? I can add it into the functional spec under definitions explaining what a finance plan is and how one needs to add it into the system, but how do I get to the backlog planning from there? Example: A Blog Article is mostly a textual document that can be written in rich text in the system. To add a blog article one must...... But how do you create backlog list/features out of this? Where are the user stories for what a blog article is and how one adds/removes it? Finally, I'm a little confused about the relations between functional specs and user stories. Will my spec contain user stories in them with UI mockups? Now will these user stories then branch out tasks which will make up something like a technical specification? Example : EditorUser Can add a blog article. Use XML to store blog article. Add a form to add blog. Add Windows Live Writer Support. That would be agile tasks but would that also be part of/or form the technical specs? Some concrete examples/answers of my questions would be nice!!

  Read the article

• Methodology to understanding JQuery plugin & API's developed by third parties

  - by Taoist

  I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

  Read the article

• Investment scheme for a PC game the project

  - by Alex Kamen

  Good day everyone, I am working on a PC game project that has 3 phases planned, micro, macro and mmo versions [if confused, see a brief description at the bottom]. I have found a potential investor for the micro version of the game, but naturally, he requested a detailed plan of how the game will pay back. And the problem is that micro version itself is not supposed to be monetized much, other than some ads and limited in-game currency utilization. The idea is that with this combat demo already at hand, it should be possible to get a really large enough investment (millions of dollars) and use it to pay back the initial small one (thousands of dollars) and take the project into macro phase, which will really make profit. This way, everybody is going to win, provided that I can deliver the end-product. Yet while I am confident of that both the conception of the macro and the real game-play of the micro versions are going to be appealing, I don’t know how to obtain any guarantee of that I will be able to get funded once I have the prototype ready. And without that, I won’t receive the funds for the prototype in the first place! To summarize, my question is: how to figure out my future possibilities of getting funded once I have combat demo out, basically “whom to write to and what”. Ideally, I would like some sort of a preliminary agreement with a game publisher, something that would basically state “If the developer provides the product in time and in quality corresponding to the specifications given, the publisher guarantees to allocate funds for distribution and further development, thereby acquiring the right to X part of all future profits”. Does this sound sane? It’s just that I don’t want to sell all of my rights out straight away by taking a big outside investment while the project is in such early stage. I would appreciate if you would share your thoughts on this kind of scheme, and be sure to ask questions as I am sure I must have forgotten to mention a ton of important things, like the fact that initial funds are going to be spent on outsourcing (living in Siberia is really just great). [here’s a brief outline of what each version will feature] [micro] 1) turn based tactical combat rules 2) character development 3) arena/tournament system [macro] 4) ai-ruled dynamic interactive worlds 5) global map adventuring 6) strategic rpg + god simulator gameplay [mmo] 7) Persistent worlds system 8) Social structures system (“guilds/clans”) 9) god-simulation on the mmo scale P.S. Obviously, these features are incremental, so that mmo version has all 9.

  Read the article

• When to use typedef?

  - by futlib

  I'm a bit confused about if and when I should use typedef in C++. I feel it's a balancing act between readability and clarity. Here's a code sample without any typedefs: int sum(std::vector<int>::const_iterator first, std::vector<int>::const_iterator last) { static std::map<std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator>, int> lookup_table; std::map<std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator>, int>::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } Pretty ugly IMO. So I'll add some typedefs within the function to make it look nicer: int sum(std::vector<int>::const_iterator first, std::vector<int>::const_iterator last) { typedef std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator> Lookup_key; typedef std::map<Lookup_key, int> Lookup_table; static Lookup_table lookup_table; Lookup_table::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } The code is still a bit clumsy, but I get rid of most nightmare material. But there's still the int vector iterators, this variant gets rid of those: typedef std::vector<int>::const_iterator Input_iterator; int sum(Input_iterator first, Input_iterator last) { typedef std::tuple<Input_iterator, Input_iterator> Lookup_key; typedef std::map<Lookup_key, int> Lookup_table; static Lookup_table lookup_table; Lookup_table::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } This looks clean, but is it still readable? When should I use a typedef? As soon as I have a nightmare type? As soon as it occurs more than once? Where should I put them? Should I use them in function signatures or keep them to the implementation?

  Read the article

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• Creating a voxel chunk with a VBO - How to translate the coordinates of each block and add it to the VBO chunk?

  - by sunsunsunsunsun

  Im trying to make a voxel engine similar to minecraft as a little learning experience and a way to learn some opengl. I have created a chunk class and I want to put all of the vertices for the whole chunk into a single VBO. I was previously only putting each block into a vbo and making a call to render each block. Anyways, I am a bit confused about how I can translate the coordinates of each block in the chunk when I'm putting all vertices into one vbo. This is what I have at the moment. public void putVertices(float tx, float ty, float tz) { float l_length = 1.0f; float l_height = 1.0f; float l_width = 1.0f; vertexPositionData.put(new float[]{ xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty,zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty,zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz }); } public void createChunk() { vertexPositionData = BufferUtils.createFloatBuffer((24*3)*activateBlocks); Random random = new Random(); for (int x = 0; x < CHUNK_SIZE; x++) { for (int y = 0; y < CHUNK_SIZE; y++) { for (int z = 0; z < CHUNK_SIZE; z++) { if(blocks[x][y][z].getActive()) { putVertices(x*2.0f, y*2.0f, z*2.0f); } } } } Whats any easy way to translate the vertices of each block into its correct position? I was previously using glTranslatef with each call to render block but this wont work now. What I am doing now also does not work, the blocks all render in stacks on top of each other and it looks like this: http://i.imgur.com/NyFtBTI.png Thanks

  Read the article

• C Minishell Command Expansion Printing Gibberish

  - by Optimus_Pwn

  I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

  Read the article

• Crash when using Cocos2d

  - by ipodfreak0313

  Sorry about the poor question title, it's just that this seems to big for a title. So here's the dirt: I am making a game (obviously) and I want the enemies to shoot (not necessarily at the player). I want the shoot method to be in the Enemies file, so as not to clutter up my HelloWorldLayer.m file even more. Here's what I'm using right now: HelloWorldLayer.m -(void)addEnemy:(BigAndStrongEnemy *)enemy { enemy = nil; if((arc4random() % 4) == 3) { enemy = [BigAndStrongEnemy enemy]; } else { enemy = [SmallAndFastEnemy enemy]; } if(buffDude.position.y > character.position.y || buffDude.position.y < (character.position.y + 10)) { } int rand = arc4random() % 320; if((arc4random() % 2 == 1)) { [enemy setPosition:ccp(0,rand)]; }else{ [enemy setPosition:ccp(480,rand)]; } [self animateEnemy:enemy]; [self addChild:enemy]; } -(void)animateEnemy:(BigAndStrongEnemy *)enemy2 { float randX = arc4random() % 480; float randY = arc4random() % 320; int rand = arc4random() % 320; CGPoint moveToPoint = CGPointMake(randX, (randY - rand)); [enemies addObject:enemy2]; action = [CCSequence actions: [CCMoveBy actionWithDuration:1 position:ccpMult(ccpNormalize(ccpSub(moveToPoint, enemy2.position)), 75)], [CCMoveBy actionWithDuration:3 position:ccp(buffDude.position.x,buffDude.position.y)], nil]; CCCallFuncO *a = [CCCallFuncO actionWithTarget:self selector:(@selector(shoot:)) object:enemy2]; CCSequence *s = [CCSequence actions:action,a, nil]; CCRepeatForever *repeat = [CCRepeatForever actionWithAction:s]; [enemy2 runAction:repeat]; } And here's the Shoot info from the Enemies class: Enemies.m: -(void)shoot:(id)sender { self = (BigAndStrongEnemy *)sender; [self shoot]; } -(void)spriteMoveFinished:(id)sender { CCSprite *b = (CCSprite *)sender; [self removeChild:b cleanup:YES]; } -(void)shoot { self = [CCSprite spriteWithFile:@"bigAndStrongEnemy.gif"]; CCSprite *b = [CCSprite spriteWithFile:@"bullet.gif"]; b.position = ccp(self.position.x,self.position.y); b.tag = 2; [self addChild:b]; [bullets addObject:b]; CGSize winSize = [[CCDirector sharedDirector] winSize]; CGPoint point = CGPointMake((winSize.width - (winSize.width - self.position.x)),0); [b runAction:[CCSequence actions: [CCMoveBy actionWithDuration:0.5 position:point], [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)], nil]]; } Every time the 3 seconds goes by, the app crashes, and goes to the breakpoint in the CCCallFuncO file. I haven't touched it, is the thing. I am completely confused. Any help is greatly appreciated.

  Read the article

• How to make my Oracle update/insert action through Java faster?

  - by gunbuster363

  I am facing a problem in my company that is - our program's speed is not fast enough. To be more specific, we are telecommunication company and this program handle call/internet serfing transaction made by every mobile phone users in our city. Because the amount of download content made by the iphone users is just too much, our program cannot handle them fast enough. The situation is, the amount of transaction made by users are double of the transaction processed by our program. Most of the running time of the program are dominated by DB transactions. I've search through the internet and browsed some sites ( for example: http://www.javaperformancetuning.com/tips/rawtips.shtml ) talking about Java performace in DB, but I cannot find a suggestion suitable for us. These advices are not applicable/already used, for instance: 1. Use prepared statements. Use parameterized SQL Already used prepared statement. Each time will use different parameter by clear parameters and set parameters. 2. Tune the SQL to minimize the data returned (e.g. not 'SELECT *'). Sure, already used. 3. Use connection pooling. We hold a single connection during the program's execution. And I doubt that pooling cannot solve the problem because our program act as 1 user, so there are no problem for concurrent access to DB. If anyone of you think pooling is good, please tell me why. Thanks. 4. Try to combine queries and batch updates. Cannot do it. Every query/insert/update is depend on the database's information. For example, we look up the DB for the client's information, if we cannot find his usage, we insert the usage into DB, otherwise we do update. 5. Close resources (Connections, Statements, ResultSets) when finished Sure. 6. Select the fastest JDBC driver. I don't know. I've search on the internet about the type of driver available and I am very confused. We use oracle.jdbc.driver.OracleDriver and we use thin instead of oci, that's all I know. In addition, our program is a two-tier way ( java <- oracle ) 7. Turn off auto-commit already done that. Looking forwards to any help.

  Read the article

• How to get lookahead symbol when constructing LR(1) NFA for parser?

  - by greenoldman

  I am reading an explanation (awesome "Parsing Techniques" by D.Grune and C.J.H.Jacobs; p.292 in the 2nd edition) about how to construct an LR(1) parser, and I am at the stage of building the initial NFA. What I don't understand is how to get/compute a lookahead symbol. Here is the example from the book, the grammar: S -> E E -> E - T E -> T T -> ( E ) T -> n n is terminal. The "weird" transitions for me are is the sequence: 1) S -> . E eof 2) E -> . E - T eof 3) E -> . E - T - 4) E -> E . - T - 5) E -> E - . T - (Note: In the above table, the state numbers are in front and the lookahead symbol is at the end.) What puzzles me is that transition from (4) to (5) means reading - token, right? So how is it that - is still a lookahead symbol and even more important why is it that eof is no longer a lookahead symbol? After all in an input such as n - n eof there is only one - symbol. My naive thinking tells me (5) should be written as: 5) E -> E - . T - eof And another thing -- n is terminal. Why it is not used at all as a lookahead symbol? I mean -- we expect to see - or (, it is ok, but lack of n means we are sure it won't appear in input? Update: after more reading I am only more confused ;-) I.e. what is really a lookahead? Because I see such state as (p.292, 2nd column, 2nd row): E -> E . - T eof Lookahead says eof but the incoming input says -. Isn't it a contradiction? And it is not only in this book.

  Read the article

• Why can't I install Microsoft Office 2007 in Ubuntu 11.04?

  - by DK new

  I am very new to Ubuntu and only just getting a hang of it, and my questions might sound stupid especially because I am a learner in terms of techie things as well. So because of the nature of work where everyone uses stupid Windows and Microsoft, I need to have access to MS Office 2007/2010 as documents with too many tables or images open all haywire in Libre Office (which has otherwise been great!). I have been reading up about installing MS Office through WINE/PlayonLinux, but have been unsuccessful so far. I downloaded a MS Office 2007 package from Pirate Bay, which I extracted into a folder. I tried numerous different ways to install through WINE and PlayonLinux, but will discuss the one which seems to be getting me somewhere. http://www.webupd8.org/2011/01/how-to-install-microsoft-office-2007-in.html ..... Initially, when I would click on the install button of MS Office, I get a message saying "The install location you selected does not have 1558MB free space. Free up space from the selected install location or choose a different install location". The install location in this case said "C:\Program Files\Microsoft Office", which confused me as I don't have drives named as C, Z etc. I went to configure WINE and under the drives tab, created a drive named A with the path location /media/cd025f16-433b-4a90-abb6-bb7a025d0450/. Also the space thing is confusing as I have at least 450GB of unused space on my computer. anyways, when I selected the A drive for installation, the installation starts, but soon I get the following error message, "Office cannot find Office.en-us\OfficeLR.Cab. Browse to a valid installation source" .... The part saying "OfficeLR.Cab" have said different things after the Office bit every time I have made an attempt. When I select the Office.en-us sub-folder or any other folder within the folder where MS Office 2007 is saved, it says "invalid source"! I have been trying to get this sorted since 15hrs now (addictive!) and have learnt loads of things in the process, but have not managed to crack it. It might be something stupidly simple I am not aware off that is stopping it. I would really appreciate some help! Thanks a lot.. Also I am still getting used to the language, so might have many questions Also I am using Ubuntu 11.04 (tag 11.04). Also I think I don't have windows -- when my friend installed Ubuntu on my new laptop which had Windows 7, he was trying to keep windows in a separate partition, but something happened and windows was not there! Looking forward to some support! Again thanks a lot

  Read the article

• Understanding the levels of computing

  - by RParadox

  Sorry, for my confused question. I'm looking for some pointers. Up to now I have been working mostly with Java and Python on the application layer and I have only a vague understanding of operating systems and hardware. I want to understand much more about the lower levels of computing, but it gets really overwhelming somehow. At university I took a class about microprogramming, i.e. how processors get hard-wired to implement the ASM codes. Up to now I always thought I wouldn't get more done if learned more about the "low level". One question I have is: how is it even possible that hardware gets hidden almost completely from the developer? Is it accurate to say that the operating system is a software layer for the hardware? One small example: in programming I have never come across the need to understand what L2 or L3 Cache is. For the typical business application environment one almost never needs to understand assembler and the lower levels of computing, because nowadays there is a technology stack for almost anything. I guess the whole point of these lower levels is to provide an interface to higher levels. On the other hand I wonder how much influence the lower levels can have, for example this whole graphics computing thing. So, on the other hand, there is this theoretical computer science branch, which works on abstract computing models. However, I also rarely encountered situations, where I found it helpful thinking in the categories of complexity models, proof verification, etc. I sort of know, that there is a complexity class called NP, and that they are kind of impossible to solve for a big number of N. What I'm missing is a reference for a framework to think about these things. It seems to me, that there all kinds of different camps, who rarely interact. The last few weeks I have been reading about security issues. Here somehow, much of the different layers come together. Attacks and exploits almost always occur on the lower level, so in this case it is necessary to learn about the details of the OSI layers, the inner workings of an OS, etc.

  Read the article

• Drawing flaming letters in 3D with OpenGL ES 2.0

  - by Chiquis

  I am a bit confused about how to achieve this. What I want is to "draw with flames". I have achieved this with textures successfully, but now my concern is about doing this with particles to achieve the flaming effect. Am I supposed to create a path along which I should add many particle emitters that will be emitting flame particles? I understand the concept for 2D, but for 3D are the particles always supposed to be facing the user? Something else I'm worried about is the performance hit that will occur by having that many particle emitters, because there can be many letters and drawings at the same time, and each of these elements will have many particle emitters. More detailed explanation: I have a path of points, which is my model. Imagine a dotted letter "S" for example. I want make the "S" be on fire. The "S" is just an example it can be a circle, triangle, a line, pretty much any path described by my set of points. For achieving this fire effect I thought about using particles. So I am using a program called "Particle Designer" to create a fire style particle emitter. This emitter looks perfect on 2D on the iphone screen dimensions. So then I thought that I could probably draw an S or any other figure if i place many particle emitters next to each other following the path described. To move from the 2D version to the 3D version I thought about, scaling the emitter (with a scale matrix multiplication in its model matrix) and then moving it to a point in my 3D world. I did this and it works. So now I have 1 particle emitter in the 3D world. My question is, is this how you would achieve a flaming letter? Is this too inefficient if i expect to have many flaming paths on my world? Am i supposed to rotate the particle's quad so that its always looking at the user? (the last one is because i noticed that if u look at it from the side the particles start to flatten out)

  Read the article

• Website directory structure regarding subdomains, www, and "global" content

  - by Pawnguy7

  I am trying to make a homemade HTTP server. It occurs to me, though, I never fully understood what you might call "relativity" among web pages. I have come across that www. is a subdomain, and I understand its original purpose. IT sounds like, in general, you would redirect (is that 301 or 302?) it to a... non-subdomain, sort of. As in, redirecting www.example.com to example.com. I am not entirely sure how to make this work when retrieving files for an HTTP server though. I would assume that example.com would be the root, and www manifests as a folder within it. I am unsure. There is also the question of multi-level subdomains, e.g. subdomain2.subdomain1.example.com. It seems to me they are structured "backwards", where you go from the root left in folder structure. In this situation, subdomain2 is a directory within subdomain1, which is a directory in the root. Finally, it occurs to me I might want a sort of global location. For example, maybe all subdomains still use an image as a logo. It makes more sense to me that there is one image, rather than each having a copy. In the same way, albiet more doubtfully, you might have global CSS (though that is a bit contrary to the idea of a subdomain in the first place), or a javascript that is commonly used. (more efficient than each having its copy and better for organization purposes). Finally, mabye you have a global 404 page. I think this might be the case where you have user-created subdomains (say bloggername.example.com), where example.com still has a default 404 when either a subdomain does not exist or page does not exists under a valid blogger. I am confused on what the directory structure for this should be. To summarize: Should and how it have a global files not in a subdirectory, how should www. be handled, (or how a now www or other subdomain should be handled), and the pattern for root/subdomain, as well as subdomain within subdomains (order-wise). Sorry this is multiple questions, but I feel at the root they are all related to the directory.

  Read the article

• Why do some user agents have spam urls in them (and why are they always Opera/Presto User-Agents)?

  - by Erx_VB.NExT.Coder

  If you go to (say) the last 100 entries (visits) to the botsvsbrowsers.com website (exact link, feel free to take a look: http://www.botsvsbrowsers.com/recent/listings/index.html ), you'd notice that almost every User Agent that has the keywords "Opera" and "Presto" inside them, will almost certainly have a web link (URL/Web Address) inside it, and it won't just be a normal web address, but a HTML anchor tag/link to that address. Why is this so, I could not even find a single discussion about it on the internet, nowhere, I tried varying my search terms many times. If the user agent contains the words "Opera" and "Presto" it doesnt mean it will have this weblink, but it means there is about an 80% change that it will. A typical anchor tag/link inside a user agent will look like this: Mozilla/4.0 <a href="http://osis-uk.co.uk/disabled-equipment">disability equipment</a> (Windows NT 5.1; U; en) Presto/2.10.229 Version/11.60 If you check it out at the website, http://www.botsvsbrowsers.com/recent/listings/index.html you will notice that the back and forward arrows are in there unescaped format. This isn't just true for botsvsbrowsers, but several other user agent listing sites. I'm really confused and feel line I'm in a room full of 10,000 people and am the only one seeing this ghost :). If I'm doing statistical analysis, should I include or exclude this type of user agent from my listing (ie: are these just normal users who've set their user agents to attempt to drive some traffic to their sites as they browser the web), or is there something else going on? The fact that it is so consistent in terms of its format leads me to believe that it is an automated process (the setting or alteration of the user agent) so I cannot decide or understand the process by which this change is made (I know how to change a user agent), but unsure which program or facility is doing this, especially since it is exclusive to Opera (Presto) user agents that are beyond I think an 8 or 9 point something browser version. I've run some statistical tests, parsing entries from all over the place, writing custom programs, to get a better understanding of this. Keep in mind that I see normal URL's in user agents infrequently, they are just text such as +http://www.someSite.com appended to a user agent normally, especially if its a crawler or bot it provided its service URL, this is normal and isnt done with an embedded link (A HREF=) etc, so I'm not talking about "those".

  Read the article

• password incorrect 3 times + suspected failed update

  - by Cheese

  I have been lurking your site for the past few hours, and have found myself in a bit of a pickle. Visiting my parents, I discover that neither computer, nor laptop work. Long story short, I've got the laptop working, but have completely fudged up the computer. I am a n00b, but I was at least willing to give it a go. The comp originally had ubuntu 11.10 installed, later updated to 12.04. We have cds for both. I do not understand what the initial problem was for my parents, but somehow when I turned on the computer, it worked for me. Soon after, I was nagged to install the latest updates. So, I spent the next half an hour wondering why the updates kept on asking for 11.04 cdroms, until I realised that you could turn off the cdrom necessity. After doing this via console, I installed some of the smaller updates, before being told to do a partial update. This failed a few times, and ended up freezing whilst reinstalling drivers. After a hard restart I continued to type whatever I could find on the forum into the console. At some point, the console started saying that I had 3 incorrect password inputs, and sudo commands stopped altogether. I found another thread discussing this; but people kept on suggesting changing passwords (which I did to no avail) or other things that made use of sudo (which I am locked out of, although I am technically the admin) I found myself somehow on the Ctrl+Alt+F1 console, and after being utterly confused (and Ctrl+AltF5 failing for me), another hard reset occurred. Somewhere along the way I created a USB start up for 14.04, (but this does not seem to work) Now I am left with an admin (and guest) account that log in but have blank screens (with only the desktop background showing) and I can't do anything in the console because I'm locked out. Interestingly, the console now says that I am running 14.04 although all updates said they had failed. Aside from the obvious lessons I have learnt (don't fiddle about in the console when you have no idea what you're doing "Dog wearing safety glasses "I have no idea what I am doing" GIF would be inserted here ) Is there any way I can redeem this almighty muck up? A million thanks for any help!

  Read the article

• What OpenGL version(s) to learn and/or use?

  - by zuko

  So, I'm new to OpenGL... I have general knowledge of game programming but little practical experience. I've been looking into various articles and books and trying to dive into OpenGL, but I've found the various versions and old vs new way of doing things confusing. I guess my first questions is does anyone know some figures about percentages of gamers that can run each version of OpenGL. What's the market share like? 2.x, 3.x, 4.x... I looked into the requirements for Half Life 2 since I know Valve updated it with OpenGL to run on Mac and I know they usually try to hit a very wide user-base, and they say a minimum of GeForce 8 Series. I looked at the 8800 GT on Nvidia's website and it listed support for OpenGL 2.1. Which, maybe I'm wrong, sounds ancient to me since there's already 4.x. I looked up a driver for 8800GT and it says it supports 4.2! A bit of a discrepancy there, lol. I've also read things like XP only supports up to a certain version, or OS X only supports 3.2, or all kinds of other things. Overall, I'm just confused as to how much support there is for various versions and what version to learn/use. I'm also looking for learning resources. My search results thus far have pointed me to the OpenGL SuperBible. The 4th edition has great reviews on Amazon, but it teaches 2.1. The 5th edition teaches 3.3 and there are a couple things in the reviews that mention the 4th edition is better and that the 5th edition doesn't properly teach the new features or something? Basically, even within learning material I'm seeing discrepancies and I just don't even know where to start. From what I understand, 3.x started a whole new way of doing things and I've read from various articles and reviews that you want to "stay away from deprecated features like glBegin(), glEnd()" yet a lot of books and tutorials I've seen use that method. I've seen people saying that, basically, the new way of doing stuff is more complicated yet the old way is bad . Just a side note, personally, I know I still have a lot to learn beforehand, but I'm interested in tessellation; so I guess that factors into it as well, because, as far as I understand that's only in 4.x? [just btw, my desktop supports 4.2]

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >