Search Results

Search found 27083 results on 1084 pages for 'having'.

Page 352/1084 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Network Transfer Rate on SMB/FTP

  - by Jack Sleight

  Hi, We're trying to optimise our network transfer rate from the client PCs to the file server, but having no luck. If I run an iperf test between a client PC (Windows XP) and our server (Linux) with a large TCP window size (the default is 8kb) I can get 60 Mbps. But when I run an SMB transfer speed test all I get is around 35 Mbps. When I run an FTP transfer speed test all I get is around 32 Mbps. I thought this was to do with the TCP window size, but I have now increased that to 256960 and it made no difference at all. Any ideas what I'm doing wrong? Or is 35 Mbps all I should expect? Cheers, Jack

  Read the article

• Proliant ML350 Won't Load Windows

  - by Mike

  I have a HP Proliant ML350 G4 running Windows 2003 Server Std Edition that will not load Windows on boot. It gave me a BSOD while running a recent Windows update and has not been able to boot since. The BSOD was a generic error, "Hardware Fault. Contact vendor." I am not getting any errors when the machine boots--it just hangs with a black screen when Windows starts to load. The machine will not boot into safe mode either--it gets stuck after beginning to load drivers. When trying to load the Windows recovery console I get the message that Windows cannot find any hard disks on the machine. This, despite having to load the driver for my storage controller. The HP Smart Start diagnostics finds no problems with my hard disks nor anything else. What should I try next? Mainly, I just want to be able to pull the data off my hard disks.

  Read the article

• Getting a list of patches in an HPSA patch policy

  - by asm

  I'm trying to get a list of patches contained in a Patch Policy in HPSA -- I can get what I need via the Twister web interface (under PatchPolicy.getPatches(), give it an ID, and it happily returns a list of patches contained.) -- I'm having a hard time getting this to work via the Pytwist interface, though... I haven't used the Pytwist interface for much besides some very basic Device manipulation, and Python is.. not my forte. I create the TwistServer object, then a PatchPolicy object from that (which I think is working..), but can't figure out how/where to call the getPatches() method from in Python-land. If there's a way to dig this out of the database itself, that would work, too, but I can't seem to find much in there along these lines besides the vendor-recommended patching stuff, and we use custom policies.

  Read the article

• Dynamic DNS at freedns.afraid.org using a Fritz!Box

  - by kai

  I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use dynamic DNS Dynamic DNS Provider: User defined Update-URL: https://freedns.afraid.org/dynamic/update.php?MY-DIRECT-URL-KEY Domain Name: mydomain.crabdance.com User Name: myusername Password: mypassword Now on the FritzBox status page, it says: Dynamic DNS: activated, mydomain.crabdance.com, Status: Account temprarily deactivated When I check back on http://freedns.afraid.org, my IP address never changes. Is there any way to fix this? Note my router is on an IPv6 network (m-net), with IPv4 only through DS-Lite. I'm not sure whether this affects anything. Update: Following the guide here (putting myusername instead of MY-DIRECT-URL-KEY) hasn't given any succes. However, the status field has changed slightly: Dynamic DNS: activated, mydomain.crabdance.com, Status: unknown

  Read the article

• L2TP with PEAP authentication from MacOS/iOS

  - by Jose

  Following the recent security advisory, I'm reconfiguring our VPN servers and having trouble. We're using Windows 2008 R2 server for VPN services, running RRAS and NPS on the same server and configure it to use PEAP-EAP-MSCHAPV2 authentiation for all tunnel type(PPTP, L2TP, IKEv2, SSTP), which previously allowed plain MSCHAPv2. But Apple products, MacOS and iOS cannot connect to VPN after this change. I tried to install root certificate used in PEAP transaction but no change. Does anyone know whether MacOS/iOS supports PEAP-EAP-MSCHAPv2 authentication in PPTP/L2TP? If so any tips to make it work? (I know PEAP-EAP-MSCHAPv2 is supported in WPA/WPA2 enterprise) Regards.

  Read the article

• Unexpected server restart - Windows 2003 SP2 fully patched

  - by PCTech

  I'm having problems with a server that has been restarting itself randomly for the past 3 months. The server is windows 2003 with SP2 Domain Controller and it is fully patched. I have seen the following errors in event log: Source: USER32 Category: None Type: Information Event ID: 1074 User: Domain\Administrator The process winlogon.exe has initiated the restart of computer (server name) on behalf of user domainname\Administrator for the following reason: No title for this reason could be found Reason Code: 0x840000ff Shutdown Type: restart I have ran out of ideas as to what might be causing this issue. The system is clean and not infected. There are no scheduled tasks responsible for the restart either. I'm considering moving the backup (Backup Exec 12.5) to a different server but I'm almost certain that this is not the issue as the restart times vary and do not match the scheduled backup jobs. Any suggestions to help me resolve this issue would be appreciated, thanks.

  Read the article

• Install Applications on OpenSUSE 11.2 w/ GNOME desktop

  - by dboarman

  Being new to OpenSUSE (v.11.2) and the GNOME desktop, I am somewhat at a loss. The differences between installing applications on Windows (formerly XP & Windows for the last 15+ years) seem to be just different enough that I am having some difficulty. For instance, how do I determine what install package I would download? Then, how do I actually install a tar.gz file or rpm, or whatever? I tried updating the Flash driver for my FoxTabs addon in FireFox but got an error that the /tmp/ directory wasn't to be used to run media, or something to that affect. So, I thought I would try to figure out first how to determine what file package to download, then how to install. I'm not sure that I need an OpenSUSE for Dummies type of link, but something that explicitly details differences in everyday operations and corresponding equivalents between Windows and OpenSUSE/GNOME. I'm also looking for a good IRC chat client.

  Read the article

• Postfix server configuration values explained?

  - by Xeoncross

  I am trying to setup a single server to send out email from a single domain but I'm having trouble identifying the correct values for these Postfix settings. mydomain = example.com myhostname = example.com myorigin = $mydomain mydestination = $example, localhost.$example, localhost relayhost = mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all Can someone can explain them so I know what I should be setting them to? Things like $mydomain appear to be added at runtime by the script. This seems to work (emails come from [email protected]) but I am weary of using values for parameters I don't understand.

  Read the article

• Conditional hotkey or include in AutoHotKey

  - by Bowen

  Is there a way to define a Hotkey conditionally in AutoHotKey? I want to do different keyboard mappings for different machines with different physical keyboards. This is what I want to do: RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName If ( ComputerName = BDWELLE-DIM8300 ) { #Include %A_ScriptDir%\Mappings-BDWELLE-DIM8300.ahk } OR RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName If ( ComputerName = BDWELLE-DIM8300 ) { LWin::LAlt [more hotkey definitions that only apply to this machine] } but since AHK parses Hotkey definitions and #Include statements BEFORE interpreting If statements, the Hotkeys definitions (whether buried in an #Include or not) do not respect the If condition. Thanks for pointing me to AutoHotKey_L! Do you have a specific example of how to conditionally define a hotkey? The syntax is very confusing. Here's what I'm trying (after having installed AutoHotKey_L.exe in place of AutoHotKey.exe): RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName #If ( ComputerName = BDWELLE-DIM8300 ) LWin::LAlt but that doesn't seem to work...

  Read the article

• Bridging with aliased Ethernet card for Virtualizing with single Ethernet card

  - by user113505

  We are having a server with good CPU and RAM,so we are planning to do XEN virtualization on ubuntu 12.04 server to handle high traffic. The plan is to keep the host machine only to manage VMs(no NAT ing). A New public IP will be assigned to that VM,For that i think we need a Bridge to external network(Since my Machine has only single ethernet card aliased with 4 different Pub IP's) Is it possible to create a bridge using aliased IP single ethernet card aliased to 4 pub IPs Do we need an additional Ethernet card to do Bridging.Only have ssh access to the machine. Any suggestions will be appreciated.

  Read the article

• Unable to authenticate Windows XP clients agains Snow Leopard Server PDC after 10.6.2 upgrade

  - by Roland

  I have setup a Snow Leopard Server 10.6.1 as a PDC without problems to authenticate Windows XP clients. Joining a Windows XP client to the SLS PDC Domain and log in from a Windows XP client to the SLS PDC Domain are working. After the update to Snow Leopard Server 10.6.2 the authentication is broken. opendirectory_smb_pwd_check_ntlmv1 gave -14090 [eDSAuthFailed] By changing the Windows XP "Network security: LAN Manager authentication level" policy to NTVLM2 responses only the authentication agains a SMB share is possible, but trying to join SLS PDC Domain is still not possible. opendirectory_smb_pwd_check_ntlmv2 gave -14090 [eDSAuthFailed] Any ideas? Is anyone else having similar authentication difficulties?

  Read the article

• Trust my work domain on a Dev Domain without a domain level password

  - by Vaccano

  I setup a virtual machine to host a dev version of TFS (to test plugins on). Getting a computer on my work domain requires large amounts of red tape and paperwork that I would rather not do. I created my own domain the the VM and I would like to trust all users from my work domain on that VM Domain. But when I tried to setup the trust I needed a password from my work domain (which I don't have). Am I trying to do something nefarious? I just want to be able to authenticate to my Test TFS (VM) Server as me (my login on my work domain). Is there a way to do that with out having to have a domain level password for my work domain? (My VM is a Windows Server 2008 R2 server)

  Read the article

• Experience with MooseFS?

  - by brown.2179

  Anyone have any experience using MooseFS? I want an easy distributed storage platform to store static data archive of about 10 TB and serve it to 20-40 nodes. Also I want to be able to add storage as the archive grows without having to rebuild the filesystem. I don't care if it's a bit slow. I just want it to be simple and stable. Basically from what I can see for OS X it's between MooseFS and Gluster. Any other suggestions?

  Read the article

• Creating Limited User Accounts on Ubuntu Server

  - by LonnieBest

  Using Ubuntu server, I need to create some user accounts that have the following limitations: (1) User may only view and manipulate files in their home directory. (2) User may only execute commands related to rsync and sftp. I want users to be able to backup files using rsync, and I want them to be able retrieve files using an sftp client like FileZilla. Other than this, I don't want users to be able to view other files on the system, or execute any commands that might mess with the system. I'm more of an Ubuntu Desktop user, and have very little experience administering a linux server. Most tutorials I've found assume I know things that I don't know. So I'm having difficulty setting this up.

  Read the article

• Jobs stuck in Print Queue on print server

  - by Carl

  Hello, I have a Server 2003 machine acting as a print server for about 20 printers. There is 1 printer which we are having issues with and it has 104 documents in its queue. I have attempted the "Cancel All Documents" and tried to manually cancel individual documents without success. The print jobs state "Deleting - Sent to printer" under their status. It has been in this state for about 2 hours. I do not believe restarting the spool is an option without effecting the other printers and we have Hold printer for a specific non windows printing friendly application, in which I can not loose the jobs for. Any ideas on a fix? Thanks, Carl

  Read the article

• SQL Server 2000 tables

  - by user40766

  We currently have an SQL Server 2000 database with one table containing data for multiple users. The data is keyed by memberid which is an integer field. The table has a clustered index on memberid. The table is now about 200 million rows. Indexing and maintenance are becoming issues. We are debating splitting the table into one table per user model. This would imply that we would end up with a very large number of tables potentially upto the 2,147,483,647, considering just positive values. My questions: Does anyone have any experience with a SQL Server (2000/2005) installation with millions of tables? What are the implications of this architecture with regards to maintenance and access using Query Analyzer, Enterprise Manager etc. What are the implications to having such a large number of indexes in a database instance. All comments are appreciated. Thanks

  Read the article

• Mac OS X: How do I disable SSID Broadcasting with Internet Sharing over Airport?

  - by Jack Chu

  I'm currently using Internet Sharing from my Ethernet over Airport on my Macbook Pro, however I don't want my SSID broadcasted†. There doesn't seem to be an option in Sharing/System Preferences to hide my ssid or prevent broadcasting. Any ideas? † My parent's restaurant has a wifi router, but it's on the roof level where the cable was installed. The signal it gets is weak, but works for the macbook. Their iPhones and 802.11G based computers can't get the wifi connection, maybe 802.11N on the macbook gets better penetration. I figure they could use the airport sharing from the laptop. For a restaurant type setting I don't think having WPA or WPA2 is super important. There's nothing sensitive or insecure on the network, so I figure hiding the SSID would be good enough for their purposes. It's not even active 100% of the time.

  Read the article

• SQL Server 2008 to Sybase Linked Server (x64) -- Provider and permissions issues

  - by Cory Larson

  Good morning, We're testing a new SQL Server 2008 setup (64-bit) and one of our requirements was to get a linked server up and talking to a Sybase database. We've successfully done so using Sybase's 64-bit 15.5 drivers, however I can't expand the catalog list from a remote machine (connecting to the '08 box with SSMS) without having my network account being added as an Administrator on the actual box and then using Windows Authentication to connect to the server instance. This is going to be problematic when we go live. Has anybody experienced this, or have any input on the permissions in SQL Server 2008 with regards to linked servers? If I remove my network account from the Administrators group, the big error I'm getting is a 'Msg 7302, Level 16, State 1, Line 41' with a description something like "Cannot create an instance of OLE DB provider "ASEOLEDB" for linked server "", and all research points to permissions issues. Thoughts? This document talks about DCOM configuration and permissions, but we've tried all of it with no luck. Thanks

  Read the article

• Allowing creation/modification of virtual aliases using web.config

  - by user25018

  Hi, I've been given a problem to fix, and I initially thought of .htaccess files, except for one thing, I quickly realized it's an IIS server. Is it possible to allow a webmaster the ability to modify the virtual directories using web.config files in the same way you can using .htaccess files? If so, any ideas on where I can find details on how this is done that I can communicate with the end client? We want to be able to do this without having to provide access to the IIS console to the webmaster. An example of the desired change is: http://FQDN/Careers/Careers.aspx?locale=en-ca&uid=Careers have http:FQDN/careers point to the above, but modified/added/removed by the end user using web.config

  Read the article

• Missing NIC and USB devices

  - by MJ

  Coming into work today, I've found we have a fwe different computers (different companies/networks/OS versions - all windows based) that are all having the same issue. 1) Network NIC is not able to be viewed from network connections. If you refresh, its saying the service is not started. Services state the service is started and running. 2) USB devices are not recognized when plugged in, scan for hardware changes, etc. We have managed AV, that is kept up to date, and a managed patch policy that has all these machines at the most recent patch. I'm just wondering if anyone else has experienced these same symptoms, and what they have done to resolve them.

  Read the article

• Unable to resolve FQDN, hostname works

  - by HannesFostie

  We are having an issue where computers who are not part of the domain cannot resolve the FQDN of a server (but regular hostname and ip do resolve). The strange thing is that this does work when the computer is added to the network. Our domain name is rather long, its something along the lines of "team.dept.company.com", could that be it? DHCP server passes along the proper DNS, Name and WINS servers, as well as the domain name. I thought that should've solved the problem, but apparently not really. Our domain is still windows2003 EDIT: I am starting to believe I can narrow this down to a problem either with the vmware tools NIC drivers that are embedded in my winPE boot image, or to the fact that I'm trying to do this from inside a VM. Pinging a FQDN at the same time when using a different task sequence on a physical machine works.

  Read the article

• Problems linking to social networks in Windows 8

  - by Andrew Cooper

  I've upgraded my laptop to Windows 8 (from Windows 7) and I'm having problems with getting information to show in the People and Messaging apps. I've linked my Facebook, Twitter and LinkedIn accounts to my Live Id, and on Windows 7 I was able to see my Friends' facebook activity in Windows Live Messenger. In the Windows 8 People app I can see all my contacts from Facebook, Twitter and LinkedIn, and I can see the on-line status of at least my Facebook contacts. I can also see the profiles details of each contact, but I don't get anything in the "What's New" view. The Messaging app is just blank. I assume I should be able to send messages to my contacts, but I can't see any way to do it. Am I missing something?

  Read the article

• Sendmail not working from local PHP when headers not specified

  - by Dan

  Hi. I'm having trouble getting my local XAMPP server to send emails via my remote SMTP server. In PHP, if I put: $headers = "From: [email protected]\r\n"; mail('[email protected]', 'test', '', $headers); Then this works. However, if I don't specify the header, ie.: mail('[email protected]', 'test', ''); Then this fails. The sendmail.log file says: smtpstatus=554 smtpmsg='554 Message refused.' errormsg='the server did not accept the mail' exitcode=EX_UNAVAILABLE I've tried changing my sendmail command in my php.ini to: sendmail_path = "C:/xampp/sendmail/sendmail.exe -t -f [email protected]" but this doesn't work either. Thanks for any help with this, Dan. ps. this is on windows.

  Read the article

• Force Capistrano to ask for password

  - by Moshe Katz

  I am deploying using Capistrano to a new server and having the following issue. Currently, I cannot add an SSH key to the server to log in with so I must use password authentication. However, I do have a key for another server saved in my local user account's .ssh directory. Here is the error I get when I try to log in: C:\Web\CampMaRabu>cap deploy:setup * executing `deploy:setup' * executing "mkdir -p /home2/webapp1 /home2/webapp1/releases /home2/webapp1/shared /home2/webapp1/shared/system /home2/webapp1/shared/log /home2/webapp1/shared/pids" servers: ["myserver.example.com"] connection failed for: myserver.example.com (OpenSSL::PKey::PKeyError: not a public key "C:/Users/MyAccount/.ssh/id_rsa.pub") How can I get Capistrano to ignore the existence of the key I have and let me log in with a password instead? I tried adding set :password, "myp@ssw0rd" to deploy.rb and it didn't help.

  Read the article

• Massive Network Upgrade

  - by Cliff Racer

  I find myself tasked with organizing an upgrade of our entire Active Directory from server 2003 to 2008. We run a few AD dependant services such as Exchange 2007 SQL Server 2008 SharePoint 2007 All of which we are looking to bring up to date as well with their most recent versions. The original AD was a little bit of a mess (the exchange upgrade from 2003 left some stuff in the AD database that I make references to servers that no longer exist for example). Here is what I want to accomplish Migrate the domain from our 2003 to a NEW clean 2008r2 domain Upgrade from Sharepoint 2007 to 2010 Upgrade Exchange from 2007 to 2010 My question is, in what order do we do things? Can I do a domain upgrade and simply migrate exchange after? On their own, these objectives are complicated enough, orchestrating them in our company while minimizing downtime is making my head spin. I have done a lot of the research on how to do them individually but I am having trouble figuring out how to do them all in concert.

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >