Search Results

Search found 44691 results on 1788 pages for 'first'.

Page 357/1788 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

  • tomcat vs FULL J2EE Solutions

    - by jrhickey
    We are getting ready to make a major revision in our Web Application architecture which currently is running on JBoss 4.2. At first we were looking at moving from 4.2 to JBoss 6 but after some research tomcat may be a better solution for us. My first question is their anything that JBoss can do that tomcat cannot do assuming you are using the correct plugins. We do not really use EJB's in our solution and it would appear there are simple plugins for web services, JMX and other features. Tomcat appears to have much better support, faster upgrade cycles and many, many books. Since there is less to the system it also seems much easier to support from an admin point of view. What am I missing? The main features we want to enable are better clustering support and session replication / persistence. We will consider other application servers as well such as Glassfish / Geronimo. quote form a web article: Apache Tomcat is the world’s most widely used web application server, with over one million downloads per month and over 70% penetration in the enterprise datacenter. Tomcat is used to power everything from simple one server sites to large enterprise networks.

    Read the article

  • How to scan multiple pages from a book under Linux?

    - by rumtscho
    I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

    Read the article

  • Recommended Win2k8 Server software to fix my RAID-0 issue

    - by Jason Kealey
    I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

    Read the article

  • URL autocomplete no longer working in Chrome

    - by Yuji Tomita
    The browser URL autocomplete has started behaving differently starting yesterday. I used to access my top urls by typing the first one or two letters of a URL then pressing enter. Now, I have to visually fish for the right one and push the down arrow to select the url. Big difference. Anybody know if I can get the old functionality back somehow? Have I messed a setting? Example of how my browser used to work: Gmail.com: CMD + L Type G Enter Stackoverflow.com CMD + L Type S Enter Normally, the browser bar would already be highlighted with gmail.com after typing the first g. It would narrow the matches depending on what characters were typed next, or simply go to it if I pressed enter. UPDATE: I just realized my history tab looks suspicious. No entries But clearly Chrome is pulling some data from my history, as I have very personalized recommendations when typing in a letter. UPDATE: Fixed! Saved my bookmarks, removed my ~/Library/Application\ Support/Google/Default directory (careful, it looks like absolutely everything is stored here) restarted chrome, and within one visit to Gmail.com, my autocomplete was filling in my URLs like so: Beautiful.

    Read the article

  • How do I get a network printer installed in ubuntu 9.04?

    - by SoaperGEM
    My girlfriend's work computer now has Linux on one of the partitions, and for the most part it's running fine--except that I can't seem to get the network printers configured right. There are two of them: a Lanier MP 7500/LD275 and a Lanier MP C3000/LD430c, and Linux seems to have found them both automatically. I'll go through the steps of what I did, and what exactly went wrong. I went to Administration Printing, and clicked the new printer button. It searched for printers and found them both, listed under "Network Printers." I added them as new printers in succession. However, when I clicked "Print a Test Page," it failed saying there was a broken pipe. The device URIs were saved as socket://[ip address]:9100. I changed these to lpd://[ip address] per some online tutorial, which at first looked like it might have worked (but didn't). Then when I tried to print a test page, it first said Processing (and sometimes even Processing - printing test page, 4%, but always subsequently displays Idle - /usr/lib/cups/backend/lpd failed. Help! What do I do? It seems like Linux can find these printers just fine, and the drivers seem to be in place, so what's going wrong?

    Read the article

  • How to route between 2 networks with a server with 2 network cards?

    - by LumenAlbum
    This is the first time I am faced with routing and it seems I have hit a dead end. I have the following scenario: client1: 192.168.1.10 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 client2: 192.168.1.20 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 server (Windows Server 2008 R2 with enabled RAS & Routing Services) network card 1 (connected to a switch along with the clients) 192.168.1.100 255.255.255.0 DNS server: 127.0.0.1 network card 2 (connected to the router) 192.168.2.100 255.255.255.0 gateway: 192.168.2.1 DNS server: 127.0.0.1 (DNS forwarding to 192.168.2.1) ISP router (with connection to internet) 192.168.2.1 Now in this scenario I have tried to route traffic from the 192.168.1.0/24 network with the clients to the 192.168.2.0/24 network with the routers to connect them to the internet. However, no matter what I do I get no positive ping to the router 192.168.2.1. Ping from 192.168.168.1.10 to 192.168.1.20: Success to 192.168.1.100: Success to 192.168.2.100: Success to 192.168.2.1: not reachable The routing table contains the 2 routes 192.168.1.0 and 192.168.2.0 as directly connected. Does anyone know where the routing fails? I have searched different forums but mostly found nothing relevant. One post however pointed out that in a similar situation the problem was that the router doesn't know the way back and the internet router would need a static route back to the first router. If that really is the case, I take it there is no solution with my equipment, because the standart ISP router doesn't allow to set any static routes.

    Read the article

  • hosting company blocking google bots and crawlers [closed]

    - by Jayapal Chandran
    Hi, I am having a site for the past three years and it is very active for the past two years. Until not the site is working well and also now but not after the hosting company blocked google bots. Many pages appeared in the first page of the google search. After they started blocking i couldn't see my links in the first page instead they appeared after 5 pages or they did not appear at all. Will hosting companies be so stupid that they block and dont mention it to their users. They want to protect themselves by making the websites at stake. I display google ads and not this month i got only half for this 10 days. I have made requests to other hosting companies like blue host and monster host that i wan to transfer my domain by making a condition that the will not block google bots which stops the business indirectly. so any kind of help will be helpful. how can i claim what i lost from the hosting company. what other hosting companies consider the users (by informing the events like changing the IP or blocking google bot.) It was really working hard to bring up my site but these people just crashed down my site in a few days. :-(

    Read the article

  • Partition is missing in /dev

    - by haimg
    I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

    Read the article

  • Who should I run mysql as, on a personal computer?

    - by user664833
    I just installed mysql via homebrew (with brew install mysql, on Mac OS X Mountain Lion - recently installed from scratch). Following the installation, there is a "caveats" section with options around further necessary actions to take: ==> Caveats Set up databases to run AS YOUR USER ACCOUNT with: unset TMPDIR mysql_install_db --verbose --user=`whoami` --basedir="$(brew --prefix mysql)" --datadir=/usr/local/var/mysql --tmpdir=/tmp To set up base tables in another folder, or use a different user to run mysqld, view the help for mysqld_install_db: mysql_install_db --help and view the MySQL documentation: * http://dev.mysql.com/doc/refman/5.5/en/mysql-install-db.html * http://dev.mysql.com/doc/refman/5.5/en/default-privileges.html To run as, for instance, user "mysql", you may need to `sudo`: sudo mysql_install_db ...options... Start mysqld manually with: mysql.server start Note: if this fails, you probably forgot to run the first two steps up above A "/etc/my.cnf" from another install may interfere with a Homebrew-built server starting up correctly. To connect: mysql -uroot To launch on startup: * if this is your first install: mkdir -p ~/Library/LaunchAgents cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist * if this is an upgrade and you already have the homebrew.mxcl.mysql.plist loaded: launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist You may also need to edit the plist to use the correct "UserName". On previous versions of Mac OS X I ran mysql as mysql user, but now I am confronted by the idea of running it as myself. I am the only one who uses this computer (which happens to be my laptop), and I do programming for work and for pleasure. What are the pros & cons, or best practices, around choosing whether to run mysql AS YOUR USER ACCOUNT or as mysql or something else still?

    Read the article

  • Can not boot windows XP from cloned hard disk - what can I do?

    - by Martin
    My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

    Read the article

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • nginx virtual hosts are not working, all vhosts goes to the default one

    - by Adirael
    Hello, I just did a clean install of nginx + php-fpm on a VPS running Ubuntu 10.10, nginx is serving and PHP is working fine, but I'm not able to add vhosts to it. Well, I can add them, but only one works, the rest go to this first one. This is my first vhost, for host1: server { listen 80; server_name host1; access_log /var/log/nginx/host1.log; error_log /var/log/nginx/host1.error.log; location / { root /var/www/vhosts/host1/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host1/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } And the second one, for host2: server { listen 80; server_name host2; access_log /var/log/nginx/host2.log; error_log /var/log/nginx/host2.error.log; location / { root /var/www/vhosts/host2/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host2/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } The problem is, when I go to http://host1 everything is fine, but on http://host2, it just shows host1! I don't have Apache installed and everything comes from repos. Any pointers?

    Read the article

  • i7-980X at 70% speed

    - by Buxley
    Hi we bought a nice computer to use to solve optimization problems. Intel i7-980X@3,33 GHz with 12 GB of Team Group 1600 MHz DDR3 RAM. When we use Gurobi the computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an i7 930 all cores are at a near 100% level even after longer solution times. We first thought that the Hard disk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of RAM we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

    Read the article

  • Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

    - by William
    I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

    Read the article

  • One Windows Domain workstation can ping gateway but gets no internet access

    - by dindeman
    One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

    Read the article

  • System randomly freezes yet mouse still moves, SSD out of reallocatable sectors, should I replace it?

    - by user784446
    This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

    Read the article

  • i7 x980 at 70% speed

    - by Buxley
    Hi we bought a nice computer to use to solve optimization problems. intel i7 X980@3,33 Mhz with 12 Gb of Team Group 1600 MHz ddr3 Ram. When we use Gurobi The Computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an I7 930 all cores are at a near 100% level even after longer solution times. we first thought that the Harddisk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of Ram we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any Ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

    Read the article

  • Per-mailbox IMAP settings in Exchange 2003 apply successfully but revert to server default

    - by erictheavg
    The title says most of it. I have a Spiceworks mailbox that connects to our Exchange Server 2003 box via IMAP for receiving help desk issues. But for complicated reasons, I want it to receive those emails in text-only format. So, I discovered that you can just go to: Exchange System Manager Administrative Groups First Administrative Group First Storage Group Mailbox Store Mailboxes Right-click the mailbox, Configure Exchange Features Edit the properties for IMAP Set that mailbox to only receive message bodies as plain text. I click OK, then Next, it reports success, and I assume I'm done. But then when I go right back to where I was, I see that "Use protocol defaults" is still checked. Anyone have a clue why this would be? Some other details: I'm logged in as Administrator when I do this. I can't change this setting for the entire IMAP virtual server because some regular users use it. I only have one IP address to play with, which means I can't create another IMAP virtual server. Any suggestions or ideas are greatly appreciated!

    Read the article

  • Unexpected media key behavior on new Acer Aspire

    - by Morgan May
    I'm having weird issues with the media keys (play/pause, previous, next, etc.) on a new Acer Aspire laptop. This is the first Acer I've owned and also my first Windows 7 computer, so I'm not sure whether the behavior is a result of some hidden Acer process that I haven't rooted out yet, or some Windows 7 option that I'm not aware of, or something else. I'm experiencing two issues that I suspect are related. Both problems are intermittent but happen more often than not. The media player I'm using is Winamp. I'm pretty sure I've had the same problem when using other media players, but when I tried to verify that before posting this, I only had the problems with Winamp. Because the problems are intermittent, I'm not sure if that's significant. 1) When I press the Play/Pause media key, in addition to playing or pausing the media player, it brings up a little menu in the center of the screen that lists my removable drives (CD/DVD, USB drives, etc.). To make the menu go away I have to either click away from it or hit Escape. Selecting a drive on the menu doesn't seem to do anything. 2) When I press the Previous or Next media keys, it skips 2+ tracks instead of just one (the exact number seems to vary). I've poked around all the control panel options that I can find, and looked through all the utilities that came with the computer with no luck. There's nothing that I can find in the (very slim) documentation, either. I have a hunch that the problem is caused by whatever utility manages global hotkeys, but I haven't found any way to configure that. Any guidance would be greatly appreciated. UPDATE: It looks like Winamp was the culprit. I did have the problem when using other media players, but when I uninstalled Winamp, the problem went away. I'd like to use Winamp, but I can survive with other players.

    Read the article

  • Encrypted Windows 7 & Linux Advice Wanted

    - by Miles
    I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

    Read the article

  • De-duplicating backup tool on a block basis? [closed]

    - by SST
    I am looking for an (ideally free as in speech or beer) backup tool for Unix-like OS which can store deduplicated backups, i.e. only nonredundant content takes up additional space. I already looked at dirvish (my first candidate) and rsnapshot which use hardlinks to achieve deduplication on a per-file level. However, as I want to back up large files (Thunderbird mailboxes 3GB, VMware images 10GB), such file are stored again entirely even if just a few bytes change. Then there are rsync-based tools like rdiff-backup which only store deltas and a current mirror. However, as the deltas are generated against each previous mirror, it is difficult to fine-tune the retention granularity (only keep one backup after a week, etc.) because the deltas would have to be re-evaluated. Another approach is to partition content into blocks and store each block only if it is not stored yet, otherwise just linking it to the first occurrence. The only tool I know of that does this by now is obnam (http://liw.fi/obnam), and it even supports zlib-compression and gpg-encryption -- nice! But it is very slow, AFAICT. Does any one know any other, solid backup software which supports deduplication on a sub-file level, ideally with at least some management options (show/select/delete generations...)?

    Read the article

  • Apps won't start after vanilla reboot

    - by Daniel R Hicks
    I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

    Read the article

  • Public Folders - Delete Public Folders from 2003 after migrating to 2010 (via Adsiedit) - safe?

    - by HeavenCore
    Similar Question: How do I delete a public store in Exchange 2003? We are ready to remove our Exchange 2003 server after having migrated all public folders and mailboxes to 2010. We ran for a week with the exchange 2003 server shutdown and everything seemed to work. When I try to delete the PF database from 2003 it says it contains replicas. Whilst migrating i only had one was sync working (from 2003 to 2010) so i believe that 2003 hasn't received the responses from 2010 saying replica removed. When I look in Public folders on the 2003 box none are listed, when i look in PF Instances they are all listed. I know everything has moved to the 2010 server and I know 2010 is not showing the 2003 server as a replica for any folders. I am looking to use ADSI edit to remove the Public folder database from the 2003 server, but want to ensure i am going to delete the right thing so that they do not get deleted from the 2010 database. Should i delete configuration, Services, Microsoft Exchange, Company Name, Administrative groups, First administrative group, Servers, Server name, Information store, First storage group, public folder store (Server name)? Or something else? I have checked and the only public folder with the old exchange server listed as a replica is SYSTEM CONFIGURATION. Thanks in advance.

    Read the article

  • Suspending/Screen Going Off When Still In Use (Ubuntu & Arch)

    - by luke
    I have a laptop (HP Pavilion G6) that was running Ubuntu and for a while now (at least 6 months) has been having a problems randomly suspending whilst still in use with a full battery and still being charged. Originally the problem was with Ubuntu so I first attempted to disable suspend using every way I could find (gui settings + dconf editor) this didn't work and it still kept suspending so I ended up switching to Arch Linux. Unfortunately not long after switching to Arch Linux I ended up experiencing the same problems. So yet again I modified the settings in /etc/systemd/logind.conf to prevent it from suspending and this time it worked, kind of. Now I am experiencing the screen going off and I have to change to a different tty (by using ctrl-alt-fx, which was something I also found I had to do sometimes when waking up from suspend in Ubuntu) to get the screen to go back on. The strange thing is this only happens when running a Linux distros and only occasionally (e.g. it may happen once/twice a week at most). But when it does happen it can happen multiple times in a row. And it only seems to happen when I am using it. This may just mean that it hasn't happened yet when I am not but generally if I leave it to run something or play a video it hasn't occurred only when I am using it regardless of which program I am using (e.g. it has occurred when using firefox, vim, even when using a virtualbox vm). At first I thought it could be the CPU temperature but after monitoring it I discovered it occurred a lot of the time when my CPU was less than 50 °C. I then checked /var/log/* but could not see anything related to it suspending only a few standard things from when it was woken up. I am really out of ideas and really hoping someone can help. Thanks in advance.

    Read the article

  • Windows 7 BSOD, safe mode working,

    - by mil0ck
    I need help getting my dualboot with Windows 7 and Ubuntu 12.04 to work, and since I'm not to experienced with computers I've been pretty dumb. Here's what I've done, quite shortend though: First removed a Ubuntu 10.04 partion, and replaced bootloader using EasyBCD Installed Ubuntu 12.04 on same partion as before Decided I need more space so I shrinked my C: partion (Windows partion) using Here, after rebooting my computer, I was stuck a grub rescue, when booting up the computer I fixed that by using SuperGrubDisk Rescatux and then using my Windows Vista install disk to repair the computer (computer is using Windows 7) I know re-installed Ubuntu 12.04 on the linux partion and got the GRUB-bootloader working Then, after using my computer for several hours, I installed beta drivers (version 304.79) for my GeForce GTS 240 and then rebooted my computer. At the first boot (after reboot) my computer just crashed, and here I am When trying to boot Windows 7 now I get a Blue Screen Of Death. I can though boot in to safe mode with everything working. I have uninstalled the beta drivers and installed the same one as before but still the same problem. I have tried all the commands in Bootrec.exe and none is working. I can't neither find an OS when using Bootrec.exe/ScanOs. I have also tried running: sfc/scannow and that comes out clean. Short: My harddrive and files seems to be intact but when booting I get bluescreen. I can though boot in to safemode with everything working. I need help Thanks to anyone who even took the time to read that. //mil0ck

    Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >