Search Results

Search found 12089 results on 484 pages for 'rule of three'.

Page 357/484 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• Creating RAID1 on Windows Server causes not enough disk space error

  - by northpole

  I have three disks. Disk0 (boot), Disk1 and Disk2. Disk 1 and 2 are both unformatted and unallocated drives. I am trying to mirror Disk0 to Disk1. They are both Dynamic and are both the same size (1TB). When I select Disk1 to be the mirror I get the error "There is not enough space available on the disk(s) to complete this operation". I have spent several hours searching for a solution but have not found one. Why do I get this error when they are both the same size? EDIT: Shrinking the volume size on the boot disk by 100MB allowed me to get past this error. From what I read the mirror drive needs to be the same size or larger than the boot drive. So I am confused why that change worked. However, I now get the error " all disks holding extents for a given volume must have the same sector size and the sector size must be valid". I believe this is because the drives are different and one has 512B and the other is the Advanced Drive that is 4KB. What the different sector sizes cause both problems? If I got the same disks would both issues go away?

  Read the article

• Postfix Whitelist before recipient restrictions

  - by GruffTech

  Alright. Some background. We have an anti-spam cluster trucking about 2-3 million emails per day, blocking somewhere in the range of 99% of spam email from our end users. The underlying SMTP server is Postfix 2.2.10. The "Frontline defense" before mail gets carted off to SpamAssassin/ClamAV/ ect ect, is attached below. ...basic config.... smtpd_recipient_restrictions = reject_unauth_destination, reject_rbl_client b.barracudacentral.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.mailspike.net, check_policy_service unix:postgrey/socket ...more basic config.... As you can see, standard RBL services from various companies, as well as a Postgrey service. The problem is, I have one client (out of thousands) who is very upset that we blocked an important email of theirs. It was sent through a russian freemailer who was currently blocked in two of our three RBL servers. I explained the situation to them, however they are insisting we do not block any of their emails. So i need a method of whitelisting ANY email that comes to domain.com, however i need it to take place before any of the recipient restrictions, they want no RBL or postgrey blocking at all. I've done a bit of research myself, http://www.howtoforge.com/how-to-whitelist-hosts-ip-addresses-in-postfix seemed to be a good guide at first, almost fixing my problem, But i want it to accept based on TO address, not originating server.

  Read the article

• Unable to connect to CopSSH when running Windows service, works when running sshd directly

  - by Joe Enos

  I've been using CopSSH (that uses OpenSSH and Cygwin, so I don't know which of the three is the problem) as my SSH server application at home on Windows 7 Ultimate 32 bit. I have used it for about a year with no real problems, other than it sometimes takes 2 or 3 connection attempts to get through, but it's always worked within a few attempts. A few days ago, it just stopped working. The Windows service is still running, and I've rebooted, restarted the service, etc. with no change. On the client (using Putty on Windows), I get the message "Software caused connection abort". On the server, my event viewer registers the following: fatal: Write failed: Socket operation on non-socket I finally got it working, but only by executing sshd.exe directly from the command line on the server. No special flags or options, just straight execution, and then when I connect remotely, it goes through. I do have firewall and anti-virus software which appears to be configured properly, but the fact that things work when running sshd.exe also indicates that the firewall is fine. I thought the service and executable did exactly the same thing, but apparently there's some difference. Does anyone have any ideas on where I should look for the problem? If I can't find something, I suppose I can write a Windows service or scheduled task that fires off sshd.exe directly and ensures that it stays running, but that's kind of a last resort, since it's just wrapping around something that should already work. I appreciate your help.

  Read the article

• Exchange Server 2010: move mailboxes from recoveded and mounted edb to user's mailbox

  - by user36090

  One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

  Read the article

• LAMP server VM issues

  - by nullArray

  After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

  Read the article

• How to split a text file into multiple text files

  - by Andrew

  I have a text file called entry.txt that contains the following: [ entry1 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3633 3634 3636 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 [ entry2 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 [ entry3 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4241 4242 4244 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5495 5496 5498 5628 5629 5631 I would like to split it into three text files: entry1.txt, entry2.txt, entry3.txt. Their contents are as follows. entry1.txt: [ entry1 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3633 3634 3636 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 entry2.txt: [ entry2 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 entry3.txt: [ entry3 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4241 4242 4244 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5495 5496 5498 5628 5629 5631 In other words, the [ character indicates a new file should begin. Is there any way I can accomplish automatic text file splitting? My eventual, actual input entry.txt actually contains 200,001 entries. Doing the text split in either Windows or Linux would be great. I do not have access to a Mac machine. Thanks!

  Read the article

• Java applet class never found

  - by Andrew

  I am having a problem with the java plugins of all three major browsers: chromium, firefox and Internet Explorer. The issue is that applets will always fail to load and yield errors no matter what website or what applet I am trying to use. I can not see any of the example applets on oracle's website; I can not launch the minecraft browser applet; nor can I launch any applet across the web using any browser. I always receive a "class not found:AppletClassHere.class" error. I know that my browser plugin must be working correctly because I can launch the Cisco Nac applet each time I connect to my network and I can launch my own simple applets offline. I am connecting to the internet through a vpn in case that is important. It also seems like a lot of other people I know are having this issue. Re-installing the plugin does not appear to fix the issue. I am asking this question to find out the cause of this problem, and any possible solutions. Thank you.

  Read the article

• (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

  - by JohnB

  I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful. I don't like to create multiple threads on multiple sites, but I'm posting here due to Chopper3's suggestion on my post on ServerFault (http://serverfault.com/questions/135349/mac-intel-hp-ps-driver-prints-in-bw-from-adobe-reader-after-installing-cannon)

  Read the article

• Windows 7 just deleted 4 days of work wtf!?

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the windows 7 system repair option. it run for a minute and then booted up. Now most of my sourcecode from the last 4 days of work is gone! background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Win 7 flag, but not read from the harddisk anymore. If I hardabord and reboot then, it asks me whether to start windows normally (which won't work) or to run "windows startup repair". If i run it, it does some stuff for about two or three minutes and then I can boot windows again. Usually after this, .exe files i added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone!! does anyone know where and whether there's a way to recover them?? please help! Thank you!

  Read the article

• How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

  - by Michael Prescott

  The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

  Read the article

• Windows 7 home backup solution, with offsite provision

  - by Richard E

  I am looking for a home backup solution for my single Windows 7 (Home Premium) PC. I have about 500GB of data to backup. I would like to spend less than GBP 300 on the solution. I don't see the need to backup the whole PC, rather specific folder branches (iTunes, photos, documents, Outlook files, user folders such as desktop, favorites etc). I would like a solution that enables me to maintain backups in two separate physical locations (e.g. home and work). To facilitate this I am imagining a storage unit with slots for two removable drives, along with three separate drives. At any one time two of the drives will be being backed up to in the storage unit. The third will be located at my work. Periodically I will take one of the drives into work and leave it there, then bring the drive that was there back home, and plug it into the storage unit. It will then be backed up along with the other drive that was left in the storage unit. This approach should cover scenarios such as virus attack and fire or theft from one location. Thoughts and comments on the sanity of this approach please...

  Read the article

• Windows 7 home backup solution, with offsite provision

  - by Richard E

  I am looking for a home backup solution for my single Windows 7 (Home Premium) PC. I have about 500GB of data to backup. I would like to spend less than GBP 300 on the solution. I don't see the need to backup the whole PC, rather specific folder branches (iTunes, photos, documents, Outlook files, user folders such as desktop, favorites etc). I would like a solution that enables me to maintain backups in two separate physical locations (e.g. home and work). To facilitate this I am imagining a storage unit with slots for two removable drives, along with three separate drives. At any one time two of the drives will be being backed up to in the storage unit. The third will be located at my work. Periodically I will take one of the drives into work and leave it there, then bring the drive that was there back home, and plug it into the storage unit. It will then be backed up along with the other drive that was left in the storage unit. This approach should cover scenarios such as virus attack and fire or theft from one location. Thoughts and comments on the sanity of this approach please...

  Read the article

• Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

  - by user647345

  My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• New hard drive for backup? [closed]

  - by glaeven

  I have come to realize that I need another external drive to use with my MacBook Pro. I currently have a 1TB WD MyBook Essential that I have been using for about a year and a half. I have it currently partitioned into two drives, one for backup (I named it Leonov) and one for movies, TV shows and other large files I don't need very often (I call that side Discovery One). I use Time Machine for backups since it is completely automated and I can restore from it without much trouble (I have had to at least three times now). As of now, Leonov is full enough that every backup deletes an old one and Discovery One is approaching it's limits. I would like to get a new drive and move one of the sides to it. What are some reliable, external (~1TB) drives for under or around $100? Would it be easier to move the movies (et al.) or the backups to the new drive? I also feel like I should say that all of my important documents (for school and the like, just not my music) are also synced to Dropbox as another form of backup and access.

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• Mac "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

• What are useful .screenrc settings?

  - by gyaresu

  Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

  Read the article

• Will just a couple of thermal "trip" shutdowns typically damage a CPU?

  - by T.J. Crowder

  The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

  Read the article

• How do you setup FTP with IIS Manager Users in an NLB environment with shared IIS configs?

  - by William Jens

  I've setup a 2 node NLB cluster and used the following to share IIS configs between them. http://blogs.technet.com/b/meamcs/archive/2012/05/30/configuring-iis-7-5-shared-configuration.aspx The IIS configs and content is located on a network share via a UNC path. This works - updating IIS settings on one node, is visible in another node and my website works on the individual nodes and the cluster as whole. I'm able to setup an FTP site and successfully connect with my Windows login. However, I want to use IIS Manager Authentication as defined in: http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7 I've tried using "Network Service" with the FTP COM object as well as a dedicated user account that exists on all three hosts, but every time I try to login with an IIS user I get something like the following: IISWMSVC_AUTHENTICATION_UNABLE_TO_READ_CONFIG An unexpected error occurred while retrieving the authentication information. Exception:System.Runtime.InteropServices.COMException (0x8007052E): Filename: Error: at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Management.Server.ConfigurationAuthenticationProvider.GetSection(ServerManager serverManager) Process:dllhost User=NT AUTHORITY\NETWORK SERVICE Can anyone point me in the right direction here?

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks. EDIT On a mailing list, someone told me that this actually WON'T WORK because IAX doesn't do T38. So, is there some other way to get Asterisk to work with Hylafax and send T38? I know that Asterisk does T38, the question is how to get the data from Hylafax and back...

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >