Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 36/87 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Can't boot 12.04 installed alongside Windows 7

  - by PalaceChan

  I realize there are other questions like this one here, but I have visited them and tried several things and nothing is helping. One of them had a suggestion to boot the liveCD, and sudo mount /dev/sda* /mnt and to then chroot and reinstall grub. I did this and it did not help. Then on the Windows side, I downloaded a free version of easyBCD and chose to add a Grub2 Ubuntu 12.04 entry. On restart I saw this entry, but when I click on it it takes me to a Windows failed to boot error, as if it wasn't even trying to boot Ubuntu. I have booted from Ubuntu liveCD once again and have a snapshot of my GParted I ran this bootinfoscript thing from the liveCD, here are my results: It seems grub is on sda. I just want to be able to boot into my Ubuntu on startup. Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1041658947 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. sda1: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi sda2: __________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda6: __________________________________________ File system: BIOS Boot partition Boot sector type: Grub2's core.img Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 1046637581 of the same hard drive for core.img. core.img is at this location and looks for (,gpt7)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda8: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 411,647 409,600 EFI System partition /dev/sda2 411,648 673,791 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 673,792 533,630,975 532,957,184 Data partition (Windows/Linux) /dev/sda4 533,630,976 1,041,658,946 508,027,971 Data partition (Windows/Linux) /dev/sda5 1,412,718,592 1,465,147,391 52,428,800 Windows Recovery Environment (Windows) /dev/sda6 1,041,658,947 1,041,660,900 1,954 BIOS Boot partition /dev/sda7 1,041,660,901 1,396,174,572 354,513,672 Data partition (Windows/Linux) /dev/sda8 1,396,174,573 1,412,718,591 16,544,019 Swap partition (Linux) blkid output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 B498-319E vfat SYSTEM /dev/sda3 820C0DA30C0D92F9 ntfs OS /dev/sda4 168410AB84108EFD ntfs DATA /dev/sda5 AC7A43BA7A438056 ntfs Recovery /dev/sda7 42a5b598-4d8b-471b-987c-5ce8a0ce89a1 ext4 /dev/sda8 5732f1c7-fa51-45c3-96a4-7af3bff13278 swap /dev/sr0 iso9660 Ubuntu 12.04 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda7/boot/grub/grub.cfg: =========================== How can I get this option? When I was using easyBCD, it kept saying I had no entries at all, so I did the add entry thing for Ubuntu many times and I see several of those on boot screen now. I'd love to get rid of all those unusable options.

  Read the article

• Introducing Oracle System Assistant

  - by B.Koch

  by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

  - by Pat

  Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

  Read the article

• UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

  - by swafbrother

  UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

  Read the article

• Ubuntu 12.04 Bootloader failed to install

  - by Chris

  Sorry about the excessively long question, but I figured giving more information would be better. I recently bought a new desktop for myself, running Windows 7. It has two hard drives, and I wanted to install Ubuntu on a small partition on the second hard drive. I created 25GB "free space" in Windows and ran a LiveCD install. I wanted to select the install options myself but accidentally selected "Install alongside Windows 7," but it seemed to pick up the free space and installed itself there as I wanted it to. However, I was told that the bootloader installation had failed. I chose to "Cancel installation," leaving my computer unable to boot. I wiped my computer and reinstalled Windows. After that, I tried installing Ubuntu through Windows using WUBI, once using files from my LiveCD and once downloading everything again. Both times the install succeeded, but both times when I restarted and tried to load Ubuntu, it gave me an error - wubildr.mbr was corrupt or missing. I checked in Windows - it was indeed present on the C:\ drive. I went back to the LiveCD installation, this time going the custom options route. I assigned 16GB to an Ext4 journaling file system and 10GB to a swap file. I got the same bootloader error as before. Being prompted to select a different partition to install the bootloader to, I first tried the partition Ubuntu was installed on. A window came up saying that the install had succeeded, but a second window gave me the same error and choices as before. I went through every single option it gave me, including the Windows partition and the hard drives themselves (dev/sda, dev/sdb). Same result. I then chose to not install a bootloader. Windows still works fine, and I assume Ubuntu has installed but is unbootable. Knowing that my computer could potentially brick itself again - and, this time around, with a lot of data to lose and hassle to go through if I mess it up - I really don't want to do anything without some advice. So I'll ask this: a) Why did the bootloader fail to install? Can I fix the error and install Ubuntu fresh? b) Is there any way to get around the error, install the bootloader, and point it towards an existing installation of Ubuntu? c) Is there a quicker and easier solution I might have missed? EDIT: Thanks for the tip, AthloX. After testing the liveCD in Virtualbox with no installation problems, I looked around for some alternate bootloaders but had no success. I attempted another install, which installed the bootloader and Ubuntu just fine but bricked Windows 7. I wiped both hard disks clean, including some "System Reserved" partitions I hadn't noticed before, before re-installing Windows 7 on one hard drive and immediately afterwards installing Ubuntu on the other. Now the computer boots into Windows, but I can pop into the BIOS at startup to boot into Ubunbtu via it's bootloader, and I'm guessing it'll only take a bit of poking at the BIOS to swap the load order. Many thanks!

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• How to R/W hard disk when CPU is in Protect Mode?

  - by smwikipedia

  I am doing some OS experiment. Until now, all my code utilized the real mode BIOS interrupt to manipulate hard disk and floppy. But once my code enabled the Protect Mode of the CPU, all the real mode BIOS interrupt service routine won't be available. How could I R/W the hard disk and floppy? I have a feeling that I need to do some hardware drivers now. Am I right? Is this why an OS is so difficult to develop? I know that hardwares are all controlled by reading from and writing to certain control or data registers. For example, I know that the Command Block Registers of hard disk range from 0x1F0 to 0x1F7. But I am wondering whether the register addresses of so many different hardwares are the same on the PC platform? Or do I have to detect that before using them? How to detect them?? For any responses I present my deep appreciation.

  Read the article

• why create CLSID_CaptureGraphBuilder2 instance always failed in a machine

  - by Yigang Wu

  It's a real strange issue, the machine information below is from DXDiag. There is no error reported, but create CLSID_CaptureGraphBuilder2 instance always failed in the machine. It's okay to create CLSID_FilterGraph. Before create CLSID_CaptureGraphBuilder2, I have called CoInitialize and created CLSID_FilterGraph. Only this machine has the error, what dll related with this interface or any function needed to call before to make it work? Thanks in advance. System Information Time of this report: 4/24/2010, 09:46:58 Machine name: TURION Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_qfe.100216-1510) Language: Japanese (Regional Setting: Japanese) System Manufacturer: To Be Filled By O.E.M. System Model: MS-7145 BIOS: Default System BIOS Processor: AMD Turion(tm) 64 Mobile Technology MT-30, MMX, 3DNow, ~1.6GHz Memory: 768MB RAM Page File: 376MB used, 1401MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.5512 32bit Unicode DxDiag Notes DirectX Files Tab: No problems found. Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Music Tab: No problems found. Input Tab: No problems found. Network Tab: No problems found.

  Read the article

• Failed to start X server. REDHAT LINUX 5.3

  - by chankey007

  I installed Red-hat 5.3 problem is that it is not showing graphical interface. only kernel / command prompt is available. I tried startx, then I got this msg No video BIOS modes for chosen depth also showing that ERROR: Failed to start X server. What should I do?

  Read the article

• VMWare ESXi 3.5 Wake On Lan

  - by QAH

  Hello everyone! I am using VMWare ESXi 3.5 on my server, and I want to be able to remotely boot the server up. In the bios settings of the computer, I enabled Wake on Lan. I know usually with Windows XP and other Windows Operating Systems, you have to also enable wake on lan in the network card settings. Do I need to do this with ESXi, and if so, how? Thanks

  Read the article

• Ubuntu + Raid on HP proliant DL 160 G6

  - by Adam Matan

  Hi, I'm, trying to install Ubuntu 8.04 Server on an HP Proliant DL160 G6. The HP hardware is certified by Ubuntu for the 9.04 version, which I can't install due to company policy. The problem is that Ubuntu would not recognize the RAID 1+0 disk configured by the BIOS. The raid creates one ~470GB disk from two 500GB physical disks. Any ideas? Adam

  Read the article

• Virtual PC on Windows 7 - Hardware-assisted virtualization is disabled

  - by DLux

  I am running a Lenovo Thinkpad T61 with an Intel Core 2 Duo T7300 processor. When I run Virtual PC in Windows 7, I get the following error: Unable to start Windows Virtual PC because hardware-assisted virtualization is disabled. When running the Hardware-Assisted Virtualization Detection Tool from Microsoft says: Hardware-assited virtualization is not enabled on this computer. Now, in the BIOS, I do have virtualization enabled and according to Intel this processor supports Intel-VT. What am I missing here?

  Read the article

• Ubuntu doesn't detect drives conected to LSI "Host Bus Adapter"

  - by dvrecmfo

  I purchased LSI SAS 9300-4i Host Bus Adapter, from card bios I can see that it detected all hard drives connected to it, but from ubuntu I can't see them. What I've tried: Installed the driver provided here http://www.lsi.com/products/host-bus-adapters/pages/lsi-sas-9300-4i.aspx#tab/tab3 (I tried both LINUX_RH_SL_OEL_CTX_MPT_GEN3_C0_Phase2.0-3.00.00.00-1 and Linux_Driver_RHEL5-6_SLES10-11_P1) lspci | grep -i lsi 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3004 PCI-Express Fusion-MPT SAS-3 (rev 02)

  Read the article

• HP 6350b Laptop is my battery really dead or is it a software problem

  - by Datapimp23

  I installed windows 7 and noticed that the battery status was "plugged in, not charging". I tried unplugging the battery, uninstalling the microsoft ACPI compliant Control Method, updating bios,windows. All to no avail. at first I tought it was related to windows 7 because it's a brand new laptop. But I also tested with a knoppix live cd, and there the output of acpi -V is this Battery 0: Unknown, 0% What else can I test to figure out what's going on.

  Read the article

• Adding Hyper-V Role Errors

  - by Brian

  Hello, I have a Win 2008 R2 Data Center machine, and when I added the Hyper-V role, I got the following errors: 'Hypervisor' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role. Hyper-V launch failed; Either VMX not present or not enabled in BIOS. ANy help would be appreciated as I am a n00b to the server world. Thanks.

  Read the article

• BSOD - probably video card prob

  - by Shimmy

  I'm receiving the following BSOD: I've tried installing the latest driver from nVidia (296.10), but it says "NVIDIA installer cannot continue", "The graphics driver could not find compatible graphics hardware.": I installed it manually at device manager, but problem still occurs. The problem does not happen in safe mode at all. Note: After restarting the computer when seeing this BSOD, the BIOS welcome screen is full of random black dots spread around: Any solutions? Update: I've tried disabling Aero by following this guide, but that didn't help.

  Read the article

• Windows 7 detects my 1 TB disk as a disk with only 31 MB space

  - by ZelluX

  I've added another 1 TB Western Digital disk on my computer (there is a disk with 250 GB already), and after booting to Windows 7, it recognise the disk, but in the Disk Management panel, it says the disk has only 31 MB TOTAL space, so is what it shows in the EVEREST information. And when I rebooted the computer and entered BIOS, it said the new disk has 0 MB disk capacity. Is there any way to fix this problem?

  Read the article

• Routing PC-speaker sounds to the sound card

  - by bobobobo

  Well, my computer didn't come with a stock PC speaker I noticed also that laptops tend to not have PC speakers either, but they make bios/beep sounds through their normal speakers. How can I configure my desktop machine to behave that way? I have a SB-XFI card

  Read the article

• Storage device not found on ESX4 with AIC-9410

  - by Mads

  I am trying to install ESX 4.0 update 1 on a Supermicro X7DBR-3 system with an embedded AIC-9410 HBA (this HBA is listed on the HCG with Vendor ID 9005 and Device ID 041f) . All SATA controllers are disabled in the BIOS and the logical drive shows up in the Adaptec device summary during POST, however there is nothing listed on the Storage Device screen. The HBA itself is listed if I run esxcfg-info but not if I run esxcfg-scsidevs -a (under ESXi for that last command) Any ideas where I can look next or what might be wrong?

  Read the article

• Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca

  - by Marlen T. B.

  I have recently (as of July 2012) bought a HP Pavilion dv6-6c40ca laptop. It came pre-installed with Windows 7 on an MBR. I installed Ubuntu 12.04 on it on a GPT partition in what I think is BIOS emulation mode. I made a BIOS-Grub partition so the install didn't fail. That is what it is for .. right? Now I want to upgrade to UEFI mode. How would I Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca. Or is it impossible? My laptop, despite its new age may not be UEFI 2.0+ capable. If it isn't how can I install a software UEFI (i.e. a DUET such as the one by tianocore). Or is this too impossible? A link to my laptop's specs is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137924&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=5218530 My laptop should have a UEFI given this link from HP http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01442956#N218. And from the link I draw a quote: That means most notebooks distributed with Windows Vista, and all notebooks distributed with Windows 7, have the UEFI environment. My laptop had Windows 7 Home Premium pre-installed. OK. Following the comments so far -- NOTE: I am trying to do this on an external drive so I can see if it works. I have partitioned the drive using GParted as a GPT drive. Created a 200MB partition at the beginning of the drive with a FAT32 file system. Given the 200MB partition a label of "EFI". Set the boot flag on the 200MB partition. What should a do next to install Ubuntu 12.04? Given the link: https://help.ubuntu.com/community/UEFIBooting#Selecting_the_.28U.29EFI_Graphic_Protocol In my first read through (just to see if I will understand everything before I start) I get to step 2.3 Install GRUB2 in (U)EFI systems The first line is Boot into Linux (any live ISO) preferably in UEFI mode. Um .. how do you tell what mode your live CD is in?! And how do you change it if the mode is wrong?

  Read the article

• What tool or scripts do you use to audit a Linux box?

  - by Sharjeel Sayed

  I use the following tools for my auditing needs A) System Auditing and Hardening (One time) 1) Linux Security Auditing Tool (Security centric,Text based output ) 2) Dmidecode ( Retrieves info from BIOS ) 3) Systeminfo ( Generates a nice html report) 4) Syssumm (Inactive since Oct 2000) 5) Rootkit Hunter (Does a basic config check in addition to rootkit checks) 6) CIS benchmarks 7) Bastille ( Interactive hardening and a security scoring tool) B) Automatic Auditing (as a cron job or a service) 1) Logwatch 2) Psad C) Remote Auditing 1) Nmap (Port scanning) 2) Nessus ( Remote Vulnerability check) D) Wikipedia 1) System profiler Any other tools/scripts which you can recommend?

  Read the article

• Does the ASUS P5Q Pro Turbo support Pentium D CPUs?

  - by Omega

  Looking at the ASUS web page as well as others, the Pentium D is not explicitly mentioned as supported on the ASUS P5Q Pro Turbo motherboard. http://ca.asus.com/product.aspx?P_ID=c19zNYHCAXhCqBPq&templete=2 However many sites seem to indicate it is. Is it supported after a BIOS update, or are they simply copy/pasting laundry lists of LGA775 CPUs?

  Read the article

• Setting up two screens in Xorg

  - by viraptor

  I'be got two Nvidia cards, but Xorg activates only one of them. The following config is based on the nvidia configurator output: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "HP LE2201w" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Acer AL2017" HorizSync 30.0 - 82.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 6100 nForce 405" BusID "PCI:0:13:0" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 8400 GS" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection What I see in the log file is: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 11:08:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (==) No device specified for screen "Screen0". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (==) No device specified for screen "Screen1". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices even though later on both cards are detected: (--) PCI:*(0:0:13:0) 10de:03d1:1019:2601 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 10de:0422:0000:0000 nVidia Corporation G86 [GeForce 8400 GS] rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ --- some more logs --- ] (II) Mar 19 11:08:10 NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 (II) Mar 19 11:08:10 NVIDIA(0): (GPU-0) [ --- some more logs --- ] (II) Mar 19 11:08:12 NVIDIA(GPU-1): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-1) Unfortunately later on only one card is initialised and one screen is active. Xrandr shows only one screen too. Any ideas on how to fix it?

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >