Search Results

Search found 1298 results on 52 pages for 'directed acyclic graphs'.

Page 36/52 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • SSRS Performance Mystery

    - by user101654
    I have a stored procedure that returns about 50000 records in 10sec using at most 2 cores in SSMS. The SSRS report using the stored procedure was taking 20min and would max out the processor on an 8 core server for the entire time. The report was relatively simple (i.e. no graphs, calculations). The report did not appear to be the issue as I wrote the 50K rows to a temp table and the report could display the data in a few seconds. I tried many different ideas for testing altering the stored procedure each time, but keeping the original code in a separate window to revert back to. After one Alter of the stored procedure, going back to the original code, the report and server utilization started running fast, comparable to the performance of the stored procedure alone. Everything is fine for now, but I am would like to get to the bottom of what caused this in case it happens again. Any ideas?

    Read the article

  • Buttons created through jquery don't respond to clicks

    - by Atrus
    As I've come to understand using $('.whatever').click() only works for items created initially. Additional items won't respond in the correct fashion. I was then directed to using something like $('.whatever).on('click', myFunction()). However, I'm not detecting any difference, as newly created items are not called. Here is a JSFiddle demonstration my example code: http://jsfiddle.net/atrus6/zaKZN/ My initial input plus 'Kill' will work in the correct fashion, however any additional 'input + kill's will not not do anything. Am I incorrectly using .on() or is it something else?

    Read the article

  • Managing Database Clusters - A Whole Lot Simpler

    - by mat.keep(at)oracle.com
    Clustered computing brings with it many benefits: high performance, high availability, scalable infrastructure, etc.  But it also brings with it more complexity.Why ?  Well, by its very nature, there are more "moving parts" to monitor and manage (from physical, virtual and logical hosts) to fault detection and failover software to redundant networking components - the list goes on.  And a cluster that isn't effectively provisioned and managed will cause more downtime than the standalone systems it is designed to improve upon.  Not so great....When it comes to the database industry, analysts already estimate that 50% of a typical database's Total Cost of Ownership is attributable to staffing and downtime costs.  These costs will only increase if a database cluster is to hard to properly administer.Over the past 9 months, monitoring and management has been a major focus in the development of the MySQL Cluster database, and on Tuesday 12th January, the product team will be presenting the output of that development in a new webinar.Even if you can't make the date, it is still worth registering so you will receive automatic notification when the on-demand replay is availableIn the webinar, the team will cover:    * NDBINFO: released with MySQL Cluster 7.1, NDBINFO presents real-time status and usage statistics, providing developers and DBAs with a simple means of pro-actively monitoring and optimizing database performance and availability.    * MySQL Cluster Manager (MCM): available as part of the commercial MySQL Cluster Carrier Grade Edition, MCM simplifies the creation and management of MySQL Cluster by automating common management tasks, delivering higher administration productivity and enhancing cluster agility. Tasks that used to take 46 commands can be reduced to just one!    * MySQL Cluster Advisors & Graphs: part of the MySQL Enterprise Monitor and available in the commercial MySQL Cluster Carrier Grade Edition, the Enterprise Advisor includes automated best practice rules that alert on key performance and availability metrics from MySQL Cluster data nodes.You'll also learn how you can get started evaluating and using all of these tools to simplify MySQL Cluster management.This session will last round an hour and will include interactive Q&A throughout. You can learn more about MySQL Cluster Manager from this whitepaper and on-line demonstration.  You can also download the packages from eDelivery (just select "MySQL Database" as the product pack, select your platform, click "Go" and then scroll down to get the software).While managing clusters will never be easy, the webinar will show hou how it just got a whole lot simpler !

    Read the article

  • What&rsquo;s new in RadChart for 2010 Q1 (Silverlight / WPF)

    Greetings, RadChart fans! It is with great pleasure that I present this short highlight of our accomplishments for the Q1 release :). Weve worked very hard to make the best silverlight and WPF charting product even better. Here is some of what we did during the past few months.   1) Zooming&Scrolling and the new sampling engine: Without a doubt one of the most important things we did. This new feature allows you to bind your chart to a very large set of data with blazing performance. Dont take my word for it give it a try!   2) New Smart Label Positioning and Spider-like labels feature: This new feature really helps with very busy graphs. You can play with the different settings we offer in this example.     3) Sorting and Filtering. Much like our RadGridview control the chart now allows you to sort and filter your data out of the box with a single line of code!   4) Legend improvements Weve also been paying attention to those of you who wanted a much improved legend. It is now possible to customize the look and feel of legend items and legend position with a single click.     5) Custom palette brushes. You have told us that you want to easily customize all palette colors using a single clean API from both XAML and code behind. The new custom palette brushes API does exactly that.   There are numerous other improvements as well, as much improved themes, performance optimizations and other features that we did. If you want to dig in further check the release notes and changes and backwards compatibility topics.   Feel free to share the pains and gains of working with RadChart. Our team is always open to receiving constructive feedback and beer :-)Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • What&rsquo;s new in RadChart for 2010 Q1 (Silverlight / WPF)

    Greetings, RadChart fans! It is with great pleasure that I present this short highlight of our accomplishments for the Q1 release :). Weve worked very hard to make the best silverlight and WPF charting product even better. Here is some of what we did during the past few months.   1) Zooming&Scrolling and the new sampling engine: Without a doubt one of the most important things we did. This new feature allows you to bind your chart to a very large set of data with blazing performance. Dont take my word for it give it a try!   2) New Smart Label Positioning and Spider-like labels feature: This new feature really helps with very busy graphs. You can play with the different settings we offer in this example.     3) Sorting and Filtering. Much like our RadGridview control the chart now allows you to sort and filter your data out of the box with a single line of code!   4) Legend improvements Weve also been paying attention to those of you who wanted a much improved legend. It is now possible to customize the look and feel of legend items and legend position with a single click.     5) Custom palette brushes. You have told us that you want to easily customize all palette colors using a single clean API from both XAML and code behind. The new custom palette brushes API does exactly that.   There are numerous other improvements as well, as much improved themes, performance optimizations and other features that we did. If you want to dig in further check the release notes and changes and backwards compatibility topics.   Feel free to share the pains and gains of working with RadChart. Our team is always open to receiving constructive feedback and beer :-)Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How to Disable Access to the Registry in Windows 7

    - by Mysticgeek
    If you don’t know what your doing in the Registry, you can mess up your computer pretty good. Today we show you how to prevent users from accessing the Registry and making any changes to it. Using Local Group Policy Editor Note: This method uses Group Policy Editor which is not available in Home versions of Windows. First type gpedit.msc into the Search box in the Start menu. When Group Policy Editor opens, navigate to User Configuration \ Administrative Templates then select System. Under Setting in the right panel double-click on Prevent access to registry editing tools. Select the radio button next to Enabled, click OK, then close out of Group Policy Editor. Now if a user tries to access the Registry… They will get the following message advising they cannot access it.   Using Registry Enabler & Disabler 3 If you’re using Home or Starter version of Windows 7, you can use a neat utility called Registry Enabler & Disabler (link below). This app works on XP and Vista as well. There is no installation involved so you can run it from a flash drive, disable the registry, then take the flash drive with you while a the user is on the machine.   Again, if the user tries to access the Registry they will get the following error… Using one of these options will stop users from gaining access to the Registry or running any registry hacks. Of course if you have a shared computer, you may want to set up other users with a Standard Account, as they won’t be able to make changes to the Registry anyway. Download Registry Enabler & Disabler 3 Similar Articles Productive Geek Tips Disable Notification Balloons in XPDisable/Enable Lock Workstation Functionality (Windows + L)Disable Windows Mobility Center in Windows 7 or VistaRegistry Hack to Disable Writing to USB DrivesSpeed Up Disk Access by Disabling Last Access Updating in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • JRockit R28/JRockit Mission Control 4.0 is out!

    - by Marcus Hirt
    The next major release of JRockit is finally out! Here are some highlights: Includes the all new JRockit Flight Recorder – supersedes the old JRockit Runtime Analyser. The new flight recorder is inspired by the “black box” in airplanes. It uses a highly efficient recording engine and thread local buffers to capture data about the runtime and the application running in the JVM. It can be configured to always be on, so that whenever anything “interesting” happens, data can be dumped for some time back. Think of it as your own personal profiling time machine. Automatic shortest path calculation in Memleak – no longer any need for running around in circles when trying to find your way back to a thread root from an instance. Memleak can now show class loader related information and split graphs on a per class loader basis. More easily configured JMX agent – default port for both RMI Registry and RMI Server can be configured, and is by default the same, allowing easier configuration of firewalls. Up to 64 GB (was 4GB) compressed references. Per thread allocation profiling in the Management Console. Native Memory Tracking – it is now possible to track native memory allocations with very high resolution. The information can either be accessed using JRCMD, or the dedicated Native Memory Tracking experimental plug-in for the Management Console (alas only available for the upcoming 4.0.1 release). JRockit can now produce heap dumps in HPROF format. Cooperative suspension – JRockit is no longer using system signals for stopping threads, which could lead to hangs if signals were lost or blocked (for example bad NFS shares). Now threads check periodically to see if they are suspended. VPAT/Section 508 compliant JRMC – greatly improved keyboard navigation and screen reader support. See New and Noteworthy for more information. JRockit Mission Control 4.0.0 can be downloaded from here: http://www.oracle.com/technology/software/products/jrockit/index.html <shameless ad> There is even a book to go with JRMC 4.0.0/JRockit R28! http://www.packtpub.com/oracle-jrockit-the-definitive-guide/book/ </shameless ad>

    Read the article

  • Disable IE 8 Thumbnail Previews on Windows 7 Taskbar

    - by Asian Angel
    The Aero thumbnail previews are a great new feature, but if you are not a fan of the flashy eye-candy, you can get rid of them with a simple tweak. Here is how to do it. Before Here we are…Internet Explorer 8 with a lot of How-To Geek Network goodness ready to go. The Taskbar Thumbnail Previews look very nice, but perhaps they take up too much room for those of you who like to keep things simple. The Taskbar Icon has the classic “fanned edge” look just like any other software with Taskbar Thumbnail Previews active. Disabling the Thumbnail Previews If you want to deactivate the Taskbar Thumbnail Previews for Internet Explorer, it is quite easy and will only take you a few moments to complete. Open IE and go to Tools \ Internet Options. When the Internet Options Window opens you will already be on the General Tab. Under the Tabs Section, click on the Settings button. The Tabbed Browsing Settings window opens. Uncheck Show previews for individual tabs in the taskbar and click OK. When you are returned to the Internet Options Window, click OK once again to totally exit out. Note: A browser restart will be required for the changes to take effect. After you have restarted Internet Explorer, you will see the simple default Taskbar Thumbnail Preview and standard icon look. Conclusion If you have been looking to disable the Taskbar Thumbnail Previews for Internet Explorer, then you are only a few clicks away from satisfaction. If you want to change it back, it is as simple as re-enabling the Show previews for individual tabs in the taskbar setting. Similar Articles Productive Geek Tips Increase the size of Taskbar Preview Thumbnails in Windows 7Vista Style Popup Previews for Firefox TabsWorkaround for Vista Taskbar Thumbnail Previews Not Showing CorrectlyDisable Thumbnail Previews in Windows 7 or Vista ExplorerGet Vista Taskbar Thumbnail Previews in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Guidance and Pricing for MSDN 2010

    - by John Alexander
    Sorry for the rather lengthy post here. I get asked this all the time so I decided to post it…Visual Studio 2010 editions will be available on April 12, 2010. Product Features Professional with MSDN Essentials Professional with MSDN Premium with MSDN Ultimate with MSDN Test Professional with MSDN Debugging and Diagnostics IntelliTrace (Historical Debugger)         Static Code Analysis       Code Metrics       Profiling       Debugger   Testing Tools Unit Testing   Code Coverage       Test Impact Analysis       Coded UI Test       Web Performance Testing         Load Testing1         Microsoft Test Manager 2010       Test Case Management2       Manual Test Execution       Fast-Forward for Manual Testing       Lab Management Configuration3       Integrated Development Environment Multiple Monitor Support   Multi-Targeting   One Click Web Deployment   JavaScript and jQuery Support   Extensible WPF-Based Environment Database Development Database Deployment       Database Change Management2       Database Unit Testing       Database Test Data Generation       Data Access   Development Platform Support Windows Development   Web Development   Office and SharePoint Development   Cloud Development   Customizable Development Experience   Architecture and Modeling Architecture Explorer         UML® 2.0 Compliant Diagrams (Activity, Use Case, Sequence, Class, Component)         Layer Diagram and Dependency Validation         Read-only diagrams (UML, Layer, DGML Graphs)         Lab Management Virtual environment setup & tear down3       Provision environment from template3       Checkpoint environment3       Team Foundation Server Version Control2   Work Item Tracking2   Build Automation2   Team Portal2   Reporting & Business Intelligence2   Agile Planning Workbook2   Microsoft Visual Studio Team Explorer 2010   Test Case Management2       MSDN Subscription – Software and Services for Production Use Windows Azure Platform 20 hrs/mo † 50 hrs/mo † 100 hrs/mo † 250 hrs/mo † n/a Microsoft Visual Studio Team Foundation Server 2010   Microsoft Visual Studio Team Foundation Server 2010 CAL   1 1 1 1 Microsoft Expression Studio 3       Microsoft Office Professional Plus 2010, Project Professional 2010, Visio Premium 2010 (following Office 2010 launch)       MSDN Subscription – Software for Development and Testing 4 Windows 7, Windows Server 2008 R2 and SQL Server 2008 Toolkits, Software Development Kits, Driver Development Kits Previous versions of Windows (client and server operation systems)   Previous versions of Microsoft SQL Server   Microsoft Office       Microsoft Dynamics       All other Servers       Windows Embedded operating systems       Teamprise         MSDN Subscription – Other Benefits Technical support incidents 0 2 4 4 2 Priority support in MSDN Forums Microsoft e-learning collections (typically 10 courses or 20 hours) 0 1 2 2 1 MSDN Flash newsletter MSDN Online Concierge MSDN Magazine   System Requirements View View View View View Buy from (MSRP) $799 $1,199 $5,469 $11,899 $2,169 Renew from (MSRP) $549 (upgrade) $799 $2,299 $3,799 $899 † Availability varies by country and subscription level.  Details available on the MSDN site 1. May require one or more Microsoft Visual Studio Load Test Virtual User Pack 2010 2. Requires Team Foundation Server and a Team Foundation Server CAL 3. Requires Microsoft Visual Studio Lab Management 2010 4. Per-user license allows unlimited installations and use for designing, developing, testing, and demonstrating applications. UML is a registered trademark of Object Management Group, Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

    Read the article

  • How to Customize the Internet Explorer 8 Title Bar

    - by Mysticgeek
    If you’re looking for a way to personalize IE 8, one method is to customize the Title Bar. Here we look at a simple Registry hack that will get the job done. The Internet Explorer Title Bar is displayed on the top of the browser with the site name followed by Windows Internet Explorer by default. If you have a small office you might want to change it to the company name, or just change it something more personal at home.   Customize the IE 8 Title Bar Note: Before making any changes to the Registry, make sure to back it up. The first thing we need to do is open the Registry by typing regedit into the Search box in the Start Menu and hit Enter. With the Registry open, navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main. Then create a new String Value and name it Window Title. Right-click on the Window Title String and enter in whatever you want to display on the Title Bar in the Value data field and click OK. When you’re done, you should see the new String called Windows Title with whatever you entered in as the value. Close out of the Registry. Restart or launch Internet Explorer and you’ll now see your new text in the Title Bar. If you want to change it to something else, just go in and modify the Value data. If you want to switch it back to the default, just go back in and delete the string we created. A lot of times you’ll see corporate branding already in the title bar from your ISP or some computer company. To get rid of it, check out The Geek’s article on how to remove it. This should work with other versions of Internet Explorer as well. Similar Articles Productive Geek Tips Remove ISP Text or Corporate Branding from Internet Explorer Title BarReset All Internet Explorer 8 Settings to Fix Stability ProblemsMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPDisable Third Party Extensions in Internet ExplorerToggle Flash On or Off in Internet Explorer the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

    Read the article

  • The Legend of the Filtered Index

    - by Johnm
    Once upon a time there was a big and bulky twenty-nine million row table. He tempestuously hoarded data like a maddened shopper amid a clearance sale. Despite his leviathan nature and eager appetite he loved to share his treasures. Multitudes from all around would embark upon an epiphanous journey to sample contents of his mythical purse of knowledge. After a long day of performing countless table scans the table was overcome with fatigue. After a short period of unavailability, he decided that he needed to consider a new way to share his prized possessions in a more efficient manner. Thus, a non-clustered index was born. She dutifully directed the pilgrims that sought the table's data - no longer would those despicable table scans darken the doorsteps of this quaint village. and yet, the table's veracious appetite did not wane. Any bit or byte that wondered near him was consumed with vigor. His columns and rows continued to expand beyond the expectations of even the most liberal estimation. As his rows grew grander they became more difficult to organize and maintain. The once bright and cheerful disposition of the non-clustered index began to dim. The wait time for those who sought the table's treasures began to increase. Some of those who came to nibble upon the banquet of knowledge even timed-out and never realized their aspired enlightenment. After a period of heart-wrenching introspection, the table decided to drop the index and attempt another solution. At the darkest hour of the table's desperation came a grand flash of light. As his eyes regained their vision there stood several creatures who looked very similar to his former, beloved, non-clustered index. They all spoke in unison as they introduced themselves: "Fear not, for we come to organize your data and direct those who seek to partake in it. We are the filtered index." Immediately, the filtered indexes began to scurry about. One took control of the past quarter's data. Another took control of the previous quarter's data. All of the remaining filtered indexes followed suit. As the nearly gluttonous habits of the table scaled forward more filtered indexes appeared. Regardless of the table's size, all of the eagerly awaiting data seekers were delivered data as quickly as a Jimmy John's sandwich. The table was moved to tears. All in the land of data rejoiced and all lived happily ever after, at least until the next data challenge crept from the fearsome cave of the unknown. The End.

    Read the article

  • Craftsmanship Tour: Day 2 Obtiva

    - by Liam McLennan
    I like Chicago. It is a great city for travellers. From the moment I got off the plane at O’Hare everything was easy. I took the train to ‘the Loop’ and walked around the corner to my hotel, Hotel Blake on Dearborn St. Sadly, the elevated train lines in downtown Chicago remind me of ‘Shall We Dance’. Hotel Blake is excellent (except for the breakfast) and the concierge directed me to a pizza place called Lou Malnati's for Chicago style deep-dish pizza. Lou Malnati’s would be a great place to go with a group of friends. I felt strange dining there by myself, but the food and service were excellent. As usual in the United States the portion was so large that I could not finish it, but oh how I tried. Dave Hoover, who invited me to Obtiva for the day, had asked me to arrive at 9:45am. I was up early and had some time to kill so I stopped at the Willis Tower, since it was on my way to the office. Willis Tower is 1,451 feet (442 m) tall and has an observation deck at the top. Around the observation deck are a set of acrylic boxes, protruding from the side of the building. Brave soles can walk out on the perspex and look between their feet all the way down to the street. It is unnerving. Obtiva is a progressive, craftsmanship-focused software development company in downtown Chicago. Dave even wrote a book, Apprenticeship Patterns, that provides a catalogue of patterns to assist aspiring software craftsmen to achieve their goals. I spent the morning working in Obtiva’s software studio, an open xp-style office that houses Obtiva’s in-house development team. For lunch Dave Hoover, Corey Haines, Cory Foy and I went to a local Greek restaurant (not Dancing Zorbas). Dave, Corey and Cory are three smart and motivated guys and I found their ideas enlightening. It was especially great to chat with Corey Haines since he was the inspiration for my craftsmanship tour in the first place. After lunch I recorded a brief interview with Dave. Unfortunately, the battery in my camera went flat so I missed recording some interesting stuff. Interview with Dave Hoover In the evening Obtiva hosted an rspec hackfest with David Chelimsky and others. This was an excellent opportunity to be around some of the very best ruby programmers. At 10pm I went back to my hotel to get some rest before my train north the next morning.

    Read the article

  • Friday Fun: Games that Look Like Productivity Apps

    - by Mysticgeek
    We’ve been showing you fun flash games to play during company time on a Friday afternoon. Hopefully while playing them, you haven’t received a “talking to”. Today we show you some cool games to play that look like productivity apps, so the boss will be none the wiser. The website cantyouseeimbusy.com has developed some very neat little games that look like productivity apps like Word and Excel. These apps look exactly like some project you would be working on, but are really neat little games. Here we take a look at three cool ones on the site called Breakdown, Leadership, and Cost Cutter. Leadership Leadership is a cool game that looks like something you would be working in Excel and is a spin off of the classic game Moon Lander. You navigate your ship through a variety of challenging line graphs. Breakdown This one is a knock off of the classic game Break Out. Use your mouse to scroll the racket at the bottom and bounce the ball off of the text in the document. Press the space bar to pause the game and the elements will disappear…good for when the boss comes around. Cost Cutter This one is a puzzle game where it looks like your working on some bar charts in Excel. You need to click combinations of two or more blocks that are the same color. Again, hit the spacebar and the game elements will disappear. If you’re looking for a way to goof off with some simple games without the boss knowing, these will definitely do the trick. Another cool game along these lines is Excit! which we covered previously. Play Cost Cutter, Breakdown, and Leadership at cantyouseeimbusy.com Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Bricks Breaking & Cube CrashFriday Fun: Fancy Pants AdventuresFriday Fun: GemCraft is a Totally Addictive Tower Defense GameFriday Fun: Five More Time Wasting Online Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

    Read the article

  • Brendan Gregg's "Systems Performance: Enterprise and the Cloud"

    - by user12608550
    Long ago, the prerequisite UNIX performance book was Adrian Cockcroft's 1994 classic, Sun Performance and Tuning: Sparc & Solaris, later updated in 1998 as Java and the Internet. As Solaris evolved to include the invaluable DTrace observability features, new essential performance references have been published, such as Solaris Performance and Tools: DTrace and MDB Techniques for Solaris 10 and OpenSolaris (2006)  by McDougal, Mauro, and Gregg, and DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD (2011), also by Mauro and Gregg. Much has occurred in Solaris Land since those books appeared, notably Oracle's acquisition of Sun Microsystems in 2010 and the demise of the OpenSolaris community. But operating system technologies have continued to improve markedly in recent years, driven by stunning advances in multicore processor architecture, virtualization, and the massive scalability requirements of cloud computing. A new performance reference was needed, and I eagerly waited for something that thoroughly covered modern, distributed computing performance issues from the ground up. Well, there's a new classic now, authored yet again by Brendan Gregg, former Solaris kernel engineer at Sun and now Lead Performance Engineer at Joyent. Systems Performance: Enterprise and the Cloud is a modern, very comprehensive guide to general system performance principles and practices, as well as a highly detailed reference for specific UNIX and Linux observability tools used to examine and diagnose operating system behaviour.  It provides thorough definitions of terms, explains performance diagnostic Best Practices and "Worst Practices" (called "anti-methods"), and covers key observability tools including DTrace, SystemTap, and all the traditional UNIX utilities like vmstat, ps, iostat, and many others. The book focuses on operating system performance principles and expands on these with respect to Linux (Ubuntu, Fedora, and CentOS are cited), and to Solaris and its derivatives [1]; it is not directed at any one OS so it is extremely useful as a broad performance reference. The author goes beyond the intricacies of performance analysis and shows how to interpret and visualize statistical information gathered from the observability tools.  It's often difficult to extract understanding from voluminous rows of text output, and techniques are provided to assist with summarizing, visualizing, and interpreting the performance data. Gregg includes myriad useful references from the system performance literature, including a "Who's Who" of contributors to this great body of diagnostic tools and methods. This outstanding book should be required reading for UNIX and Linux system administrators as well as anyone charged with diagnosing OS performance issues.  Moreover, the book can easily serve as a textbook for a graduate level course in operating systems [2]. [1] Solaris 11, of course, and Joyent's SmartOS (developed from OpenSolaris) [2] Gregg has taught system performance seminars for many years; I have also taught such courses...this book would be perfect for the OS component of an advanced CS curriculum.

    Read the article

  • How to Format a USB Drive in Ubuntu Using GParted

    - by Trevor Bekolay
    If a USB hard drive or flash drive is not properly formatted, then it will not show up in the Ubuntu Places menu, making it hard to interact with. We’ll show you how to format a USB drive using the tool GParted. Note: Formatting a USB drive will destroy any data currently stored on it. If you think that your USB drive is already properly formatted, but Ubuntu just isn’t picking it up, try unplugging it and plugging it back in to a different USB slot, or restarting your machine with the device plugged in on start-up. Open a terminal by clicking on Applications in the top-left of the screen, then Accessories > Terminal. GParted should be installed by default, but we’ll make sure it’s installed by entering the following command in the terminal: sudo apt-get install gparted To open GParted, enter the following command in the terminal: sudo gparted Find your USB drive in the drop-down box at the top right of the GParted window. The drive should be unallocated – if it has a valid partition on it, then you may be looking at the wrong drive. Note: Make sure you’re on the correct drive, as making changes on the wrong hard drive with GParted can delete all data on a hard drive! Assuming you’re on the right drive, right-click on the unallocated grey block and click New. In the window that pops up, change the File System to fat32 for USB Flash Drives, NTFS for USB Hard Drives that will be used in Windows, or ext3/ext4 for USB Hard Drives that will be used exclusively in Linux. Add a label if you’d like, and then click Add. Click the green checkmark and then the Apply button to apply the changes. GParted will now format your drive. If you’re formatting a large USB Hard Drive, this can take some time. Once the process is done, you can close GParted, and the drive will now show up in the Places menu. Clicking on the drive will mount it and open it in a File Browser window. It will also add a shortcut to the drive on the Desktop by default. Your USB drive is now ready to store your files! Similar Articles Productive Geek Tips Using GParted to Resize Your Windows Vista PartitionInstall an RPM Package on Ubuntu LinuxCreate a Persistent Bootable Ubuntu USB Flash DriveShare Ubuntu Home Directories using SambaCreate a Samba User on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Find a Faster DNS Server with Namebench

    - by Mysticgeek
    One way to speed up your Internet browsing experience is using a faster DNS server. Today we take a look at Namebench, which will compare your current DNS server against others out there, and help you find a faster one. Namebench Download the file and run the executable (link below). Namebench starts up and will include the current DNS server you have configured on your system. In this example we’re behind a router and using the DNS server from the ISP. Include the global DNS providers and the best available regional DNS server, then start the Benchmark. The test starts to run and you’ll see the queries it’s running through. The benchmark takes about 5-10 minutes to complete. After it’s complete you’ll get a report of the results. Based on its findings, it will show you what DNS server is fastest for your system. It also displays different types of graphs so you can get a better feel for the different results. You can export the results to a .csv file as well so you can present the results in Excel. Conclusion This is a free project that is in continuing development, so results might not be perfect, and there may be more features added in the future. If you’re looking for a method to help find a faster DNS server for your system, Namebench is a cool free utility to help you out. If you’re looking for a public DNS server that is customizable and includes filters, you might want to check out our article on helping to protect your kids from questionable content using OpenDNS. You can also check out how to speed up your web browsing with Google Public DNS. Links Download NameBench for Windows, Mac, and Linux from Google Code Learn More About the Project on the Namebench Wiki Page Similar Articles Productive Geek Tips Open a Second Console Session on Ubuntu ServerShare Ubuntu Home Directories using SambaSetup OpenSSH Server on Ubuntu LinuxDisable the Annoying “This device can perform faster” Balloon Message in Windows 7Search For Rows With Special Characters in SQL Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

    Read the article

  • Boot Problem in Asus EEE PC 1015CX

    - by Sâmrat VikrãmAdityá
    I am a newbie to Linux world, although I have previously worked on Ubuntu 11.04 for daily use (Net Access and simple recordings using Audacity). I am not sure, at what level I stand as a newbie. I bought this Asus Eee PC two days back. The model is Asus 1015CX. See the specs here http://www.flipkart.com/asus-1015cx-blk011w-laptop-2nd-gen-atom-dual-core-1gb-320gb-linux/p/itmd8qu4quzu8srr . I created a live USB to install 12.10. The usb booted fine. When I clicked "Try Ubuntu" option, it showed me a black screen with a cursor blinking. I waited for 15 minutes and had to restart using the power button. On clicking the "Install Ubuntu" button, the install process went seamlessly. [I have a Windows7 installed on one of the partitions]. i installed it alongside previous windows installation. The system was then rebooted for the first time. It showed the GRUB menu and I selected the first option Ubuntu. After showing the splash screen for a second, it began showing various messages on a black screen and then it struck on "Stopping Save kernel state message". I had to force shut the system using power button. Sometimes it just gives a blank screen with a cursor blinking and on pressing power button, some messages stating that acpid is doing something and stopping services pops up and the system shuts down. I tried booting with "nomodeset" and other parameters as directed in solution to previous such problems on forums. Also Ctrl+Alt+F1,F2,F3,F4,F5,F6..F12 is not doing anything for me anywhere. At installation, I checked Login automatically option. On booting into recovery several options comes up. Clicking resume just gives me a blank screen with cursor blinking. on dropping to root shell and remounting filesystem as RW, I am able to supply some command that worked for others. startx -- Several messages comes up with last one stating Fatal error: No screen found sudo service lightdm start -- Gives a blank screen with a cursor blinking lspci | grep VGA -- Shows some Intel Integrated Graphic... something I don't remember I had reconfigured xserver-xorg, lightdm, reinstalled ubuntu-desktop, unity. What should I do..?? Will going back to 11.04 work..?? Or I should leave all hopes of running Ubuntu on my netbook. Please help.

    Read the article

  • How to develop "Client script library" for ASP.net controls and how do these work?

    - by Niranjan Kala
    I have been working on .Net platform for 2 years and right now I am working on DevExpress controls for 6 months. All these control have client-side Events which are under some ClientScript nameSpace of particular control, Which specify ClientInstanceName, methods and properties accessible at client side. For example Button1 is ClientInstanceName and Button1.Text is a property, with methods like these: Button1.SetValue(); Button1.GetValue(); In ASP.Net Controls, buttons have the ClientClick event that fires before the Server Side Click event. I have inspected and goggled to extend client side functionality in asp.net controls. For example: create a ClientInstanceName property for controls or CheckedChanged event for CheckBox / RadioButton control. I have tried using these MSDN articles: Injecting Client-Side Script from an ASP.NET Server Control Working with Client-Side Script I got much information and ideas from these articles on how to implement/extend these. All are working in the client side. protected override void AddAttributesToRender(HtmlTextWriter writer) { base.AddAttributesToRender(writer); string script = @"return confirm(""%%POPUP_MESSAGE%%"");"; script = script.Replace("%%POPUP_MESSAGE%%", this.PopupMessage.Replace("\"", "\\\"")); writer.AddAttribute(HtmlTextWriterAttribute.Onclick, script); } Here It is just setting up attribute to the button. but all client side interaction no control from server. Here is that I want to know: How can I implement such functionality to create methods, properties etc. on client side. For example I am creating a PopControl as in the above code snippet same behavior as like Ajax ModalPopupExtender That have OK Button related properties. Ajax Controls can be directed to perform work from server side code e.g. Popup1.show(); How can I do this with such client enabled controls implemented controls as windows do? I am learning creation of Ajax Controls but I do not want to use ScriptManager or depend on another control. Just some extension to standard controls. I am expecting for ideas and implementation methods for such functionality.

    Read the article

  • What&rsquo;s new in RadChart for 2010 Q1 (Silverlight / WPF)

    Greetings, RadChart fans! It is with great pleasure that I present this short highlight of our accomplishments for the Q1 release :). Weve worked very hard to make the best silverlight and WPF charting product even better. Here is some of what we did during the past few months.   1) Zooming&Scrolling and the new sampling engine: Without a doubt one of the most important things we did. This new feature allows you to bind your chart to a very large set of data with blazing performance. Dont take my word for it give it a try!   2) New Smart Label Positioning and Spider-like labels feature: This new feature really helps with very busy graphs. You can play with the different settings we offer in this example.   3) Sorting and Filtering. Much like our RadGridview control the chart now allows you to sort and filter your data out of the box with a single line of code!   4) Legend improvements Weve also been paying attention to those of you who wanted a much improved legend. It is now possible to customize the look and feel of legend items and legend position with a single click.   5) Custom palette brushes. You have told us that you want to easily customize all palette colors using a single clean API from both XAML and code behind. The new custom palette brushes API does exactly that.   There are numerous other improvements as well, as much improved themes, performance optimizations and other features that we did. If you want to dig in further check the release notes and changes and backwards compatibility topics.   Feel free to share the pains and gains of working with RadChart. Our team is always open to receiving constructive feedback and beer :-)Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Brightness Crash and Fan issues in 12.04.1

    - by S.A. McIntosh
    I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

    Read the article

  • Access forbidden 403 error in xampp

    - by Ramvignesh
    I am very new to xampp. I have made a fresh xampp install with the following commands. sudo su cd /tmp wget bit.ly/1cmyrUo -O xampp-32bit.run chmod 777 ./xampp-32bit.run sudo ./xampp-32bit.run Then I made a perl file to check whether my xampp works. The following is my sample.pl file content. #!usr/bin/perl print "content-type:text/html\n"; print(header()); use CGI qw(:standard); print(start_html()); print "Hello. I am ram"; print(end_html()); After copying my perl file from /home/vicky/desktop to /opt/lampp/cgi-bin. I started my xampp with the following command. /opt/lampp/lampp start Then I ran my sample.pl in the localhost with the help of the http://localhost/cgi-bin/sample.pl in my mozilla browser. I just got the following window. I found only answers relating to the 'new security concept error' and 'accessing virtual host issue'. I did came across an askubuntu query, a bid similar to that of mine. It had no answers but some comments. One comment suggested to change the file permissions. It directed to get help from here. It said to change the directory permission as 755 and file permission as 644 to resolve this kind of issue. When I tried to do that, I came to know that my cgi-bin directory already had 755 permission and my sample.pl had 644 permission. I have no solutions now. PostScript: I have attached the content of my /opt/lampp/apache2/conf/httpd.conf file. Hope this will help the answer-providers to understand my problem completely. Alias /bitnami/ "/opt/lampp/apache2/htdocs/" Alias /bitnami "/opt/lampp/apache2/htdocs" <Directory "/opt/lampp/apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory>

    Read the article

  • CRM vs VRM

    - by David Dorf
    In a previous post, I discussed the potential power of combining social, interest, and location graphs in order to personalize marketing and shopping experiences for consumers.  Marketing companies have been trying to collect detailed information for that very purpose, a large majority of which comes from tracking people on the internet.  But their approaches stem from the one-way nature of traditional advertising.  With TV, radio, and magazines there is no opportunity to truly connect to customers, which has trained marketing companies to [covertly] collect data and segment customers into easily identifiable groups.  To a large extent, we think of this as CRM. But what if we turned this viewpoint upside-down to accommodate for the two-way nature of social media?  The notion of marketing as conversations was the basis for the Cluetrain, an early attempt at drawing attention to the fact that customers are actually unique humans.  A more practical implementation is Project VRM, which is a reverse CRM of sorts.  Instead of vendors managing their relationships with customers, customers manage their relationships with vendors. Your shopping experience is not really controlled by you; rather, its controlled by the retailer and advertisers.  And unfortunately, they typically don't give you a say in the matter.  Yes, they might tailor the content for "female age 25-35 interested in shoes" but that's not really the essence of you, is it?  A better approach is to the let consumers volunteer information about themselves.  And why wouldn't they if it means a better, more relevant shopping experience?  I'd gladly list out my likes and dislikes in exchange for getting rid of all those annoying cookies on my harddrive. I really like this diagram from Beyond SocialCRM as it captures the differences between CRM and VRM. The closest thing to VRM I can find is Buyosphere, a start-up that allows consumers to track their shopping history across many vendors, then share it appropriately.  Also, Amazon does a pretty good job allowing its customers to edit their profile, which includes everything you've ever purchased from Amazon.  You can mark items as gifts, or explicitly exclude them from their recommendation engine.  This is a win-win for both the consumer and retailer. So here is my plea to retailers: Instead of trying to infer my interests from snapshots of my day, please just ask me.  We'll both have a better experience in the long-run.

    Read the article

  • Business Strategy - Google Case Study

    Business strategy defined by SMBTN.com is a term used in business planning that implies a careful selection and application of resources to obtain a competitive advantage in anticipation of future events or trends. In more general terms business strategy is positioning a company so that it has the greatest competitive advantage over others in the markets and industries that they participate in. This process involves making corporate decisions regarding which markets to provide goods and services, pricing, acceptable quality levels, and how to interact with others in the marketplace. The primary objective of business strategy is to create and increase value for all of its shareholders and stakeholders through the creation of customer value. According to InformationWeek.com, Google has a distinctive technology advantage over its competitors like Microsoft, eBay, Amazon, Yahoo. Google utilizes custom high-performance systems which are cost efficient because they can scale to extreme workloads. This hardware allows for a huge cost advantage over its competitors. In addition, InformationWeek.com interviewed Stephen Arnold who stated that Google’s programmers are 50%-100% more productive compared to programmers working for their competitors.  He based this theory on Google’s competitors having to spend up to four times as much just to keep up. In addition to Google’s technological advantage, they also have developed a decentralized management schema where employees report directly to multiple managers and team project leaders. This allows for the responsibility of the technology department to be shared amongst multiple senior level engineers and removes the need for a singular department head to oversee the activities of the department.  This is a unique approach from the standard management style. Typically a department head like a CIO or CTO would oversee the department’s global initiatives and business functionality.  This would then be passed down and administered through middle management and implemented by programmers, business analyst, network administrators and Database administrators. It goes without saying that an IT professional’s responsibilities would be directed by Google’s technological advantage and management strategy.  Simply because they work within the department, and would have to design, develop, and support the high-performance systems and would have to report multiple managers and project leaders on a regular basis. Since Google was established and driven by new and immerging technology, all other departments would be directly impacted by the technology department.  In fact, they would have to cater to the technology department since it is a huge driving for in the success of Google. Reference: http://www.smbtn.com/smallbusinessdictionary/#b http://www.informationweek.com/news/software/linux/showArticle.jhtml?articleID=192300292&pgno=1&queryText=&isPrev=

    Read the article

  • How to build a 4x game?

    - by Marco
    I'm trying to study how succefully implement a 4x game. Area of interest: 1) map data: how to store stellars systems (graphs?), how to generate them and so on.. 2) multiplayer: how to organize code in a non graphical server and a client to display it 3) command system: what are patters to catch user and ai decisions and handle them, adding at first "explore" and "colonize" then "combat", "research", "spy" and so on (commands can affect ships, planets, research, etc..) 4) ai system: ai can use commands to expand, upgrade planets and ship I know is a big questions, so help is appreciated :D 1) Map data Best choice is have a graph to model a galaxy. A node is a stellar system and every system have a list of planets. Ship cannot travel outside of predefined paths, like in Ascendancy: http://www.abandonia.com/files/games/221/Ascendancy_2.png Every connection between two stellar systems have a cost, in turns. Generate a galaxy is only a matter of: - dimension: number of stellar systems, - variety: randomize number of planets and types (desertic, earth, etc..), - positions of each stellar system on game space - connections: assure that exist a path between every node, so graph is "connected" (not sure if this a matematically correct term) 2) Multiplayer Game is organized in turns: player 1, player 2, ai1, ai2. Server take care of all data and clients just diplay it and collect data change. Because is a turn game, latency is not a problem :D 3) Command system I would like to design a hierarchy of commands to take care of this aspect: abstract Genericcommand (target) ExploreCommand (Ship) extends genericcommand colonizeCommand (Ship) buildcommand(planet, object) and so on. In my head all this commands are stored in a queue for every planets, ships or reasearch center or spy, and each turn a command is sent to a server to apply command and change data state 4) ai system I don't have any idea about this. Is a big topic and what I want is a simple ai. Something like "expand and fight against everyone". I think about a behaviour tree to control ai moves, so I can develop an ai that try to build ships to expand and then colonize planets, upgrade them throught science and combat enemies. Could be done with a finite state machine too ? any ideas, resources, article are welcome!

    Read the article

  • SQL – Biggest Concerns in a Data-Driven World

    - by Pinal Dave
    The ongoing chaos over Government Agency’s snooping has ignited a heated debate on privacy of personal data and its use by government and/or other institutions. It has created a feeling of disapproval and distrust among users. This incident proves to be a lesson for companies that are looking to leverage their business using a data driven approach. According to analysts, the goal of gathering personal information should be to deliver benefits to both the parties – the user as well as the data collector(government or business). Using data the right way is crucial, and companies need to deploy the right software applications and systems to ensure that their efforts are well-directed. However, there are various issues plaguing analysts regarding available software, which are highlighted below. According to a InformationWeek 2013 Survey of Analytics, Business Intelligence and Information Management where 541 business technology professionals contributed as respondents, it was discovered that the biggest concern was deemed to be the scarcity of expertise and high costs associated with the same. This concern was voiced by as many as 38% of the participants. A close second came out to be the issue of data warehouse appliance platforms being expensive, with 33% of those present believing it to be a huge roadblock. Another revelation made in this respect was that 31% professionals weren’t even sure how Data Analytics can create business opportunities for them. Another 17% shared that they found data platform technologies such as Hadoop and NoSQL technologies hard to learn. These results clearly pointed out that there are awareness and expertise issues that also need much attention. Unless the demand-supply gap of Business Intelligence professionals well versed in data analysis technologies is met, this divide is going to affect how companies make the most of their BI campaigns. One of the key action points that can be taken to salvage the situation, is to provide training on Data Analytics concepts. Koenig Solutions offer courses on many such technologies including a course on MCSE SQL Server 2012: BI Platform. So it’s time to brush up your skills and get down to work in a data driven world that awaits you ahead. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >