Search Results

Search found 5136 results on 206 pages for 'max toro'.

Page 36/206 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Add User to Database not working

    - by user1850189
    I'm really new to ASP.net and I am currently trying to create a registration page on a site. I was successful in adding a user to the database but I decided to add another feature into the code to check what userID's were available. For example, if a user deleted their account their userID would become available for use again. I'm trying to find the min value and the max value and add or subtract 1 depending on whether it is min or max. I can run the code I have written for this with no errors but the user is not added to the database. Can anyone help me figure out what I'm missing from my code to do this? EDIT Code adds a user to database but it adds the new user at -1 instead. I don't seem to be able to see where the issue is. If (aDataReader2.Read() = False) Then aConnection1 = New OleDbConnection(aConnectionString) aConnection1.Open() aQuery = "Insert Into UserDetails " aQuery = aQuery & "Values ('" & userID & "','" & userFName & "','" & userLName & "','" & userEmail & "','" & userUsername & "','" & userPassword & "')" aCommand = New OleDbCommand(aQuery, aConnection1) aCommand.ExecuteNonQuery() aConnection1.Close() ElseIf (min = 1) Then aConnection2 = New OleDbConnection(aConnectionString) aConnection2.Open() aCommand = New OleDbCommand(aQuery3, aConnection2) aDataReader2 = aCommand.ExecuteReader() userID = max + 1 aQuery = "Insert Into UserDetails " aQuery = aQuery & "Values ('" & userID & "','" & userFName & "','" & userLName & "','" & userEmail & "','" & userUsername & "','" & userPassword & "')" aCommand = New OleDbCommand(aQuery, aConnection2) aCommand.ExecuteNonQuery() aConnection2.Close() Else aConnection3 = New OleDbConnection(aConnectionString) aConnection3.Open() aCommand = New OleDbCommand(aQuery2, aConnection3) aDataReader2 = aCommand.ExecuteReader userID = min - 1 aQuery = "Insert Into UserDetails " aQuery = aQuery & "Values ('" & userID & "','" & userFName & "','" & userLName & "','" & userEmail & "','" & userUsername & "','" & userPassword & "')" aCommand = New OleDbCommand(aQuery, aConnection3) aCommand.ExecuteNonQuery() aConnection3.Close() lblResults.Text = "User Account successfully created" btnCreateUser.Enabled = False End If Here's the code I used to get the max and min values from the database. I'm getting a value of 0 for both of them - when min should be 1 and max should be 5 Dim minID As Integer Dim maxID As Integer aQuery2 = "Select Min(UserID) AS '" & [minID] & "' From UserDetails" aQuery3 = "Select Max(UserID) AS ' " & [maxID] & "' From UserDetails"

    Read the article

  • What does this error mean (Can't create TCP/IP socket (24))?

    - by user105196
    I have web server with OS RHEL 6.2 and Mysql 5.5.23 on another server and the web server can read from Mysql server without problem, but some time I got this error: [Sun Sep 23 06:13:07 2012] [error] [client XXXXX] DBI connect('XXXX:192.168.1.2:3306','XXX',...) failed: Can't create TCP/IP socket (24) at /var/www/html/file.pm line 199. my question : What does this error mean (Can't create TCP/IP socket (24))? is it OS error or Mysql error ? perl -v This is perl, v5.10.1 (*) built for x86_64-linux-thread-multi mysql -V mysql Ver 14.14 Distrib 5.5.23, for Linux (x86_64) using readline 5.1 su - mysql -s /bin/bash -c 'ulimit -a' core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127220 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

  • Plus sign ( + ) in a rewrite rule (.HTACCESS on Linux Server) (SOLVED)

    - by ienabellamy
    i've this snippet, but it doesn't works. Obviously is that plus sign + tha must be escape ? RewriteCond %{QUERY_STRING} ^orderby=position&controller=search&orderway=desc&search_query=t+max$ RewriteRule ^it/cerca$ http://www.wrs.sm/it/cerca?orderby=position&controller=search&orderway=desc&search_query=tmax? [R=301,L] i want to redirect this url http://www.wrs.sm/it/cerca?orderby=position&controller=search&orderway=desc&search_query=t+max to this http://www.wrs.sm/it/cerca?orderby=position&controller=search&orderway=desc&search_query=tmax Thanks ;) I found the solution, the correct rules are: RewriteCond %{QUERY_STRING} ^orderby=position&controller=search&orderway=desc&search_query=t\+max$ RewriteRule ^it/cerca$ http://www.wrs.sm/it/cerca?orderby=position&controller=search&orderway=desc&search_query=tmax [R=301,L]

    Read the article

  • Squeezing hardware

    - by [email protected]
    It's very common that high availability means duplicate hardware so costs grows up.Nowadays, CIOs and DBAs has the main challenge of reduce the money spent increasing the performance and the availability. Since Grid Infrastructure 11gR2, there is a new feature that helps them to afford this challenge: Server PoolsNow, in Grid Infrastructure 11gR2, you can define server pools across the cluster setting up the minimum number of servers, the maximum and how important is the pool.For example:Consider  that "Velasco, Boixeda & co"  has 3 apps in a 6 servers cluster.First One is the main core business appSecond one is Mid RangeAnd third it's a database not very important.We Define the following resource requirements for expected workload:1- Main App 2 servers required2- Mid Range App requires 1 server3- Is not a required app in case of disasterThe we define 3 server pools across the cluster:1- Main pool min two servers, max three servers, importance four2- Mid pool, min one server max two servers, importance two3- test pool,min zero servers, max one server, importance oneSo the initial configuration is:-Main pool has three servers-Mid pool has two servers-Test pool has one serverLogically, we can see the cluster like this:If any server fails, the following algorithm will be applied:1.-The server pool of least importance2.-IF server pools are of the same importance,   THEN then the Server Pool that has more than its defined minimum servers Is chosenHope it helps 

    Read the article

  • Enabling XML-documentation for code contracts

    - by DigiMortal
    One nice feature that code contracts offer is updating of code documentation. If you are using source code documenting features of Visual Studio then code contracts may automate some tasks you otherwise have to implement manually. In this posting I will show you some XML documentation files with documented contracts. I will also explain how this feature works. Enabling XML-documentation in project settings As a first thing let’s enable generating of code documentation under project settings. Open project properties, move to Build page and make check to checkbox called “XML documentation file”. Save project settings and rebuild project. When project is built go to bin/Debug folder and open the XML-file. Here is my XML. <?xml version="1.0"?> <doc>     <assembly>         <name>Eneta.Examples.CodeContracts.Testable</name>     </assembly>     <members>         <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">             <summary>             Class for generating random integers in user specified range.             </summary>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">             <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>             <param name="generator">Instance of random number generator.</param>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">             <summary>             Returns random integer in given range.             </summary>             <param name="min">Minimum value of random integer.</param>             <param name="max">Maximum value of random integer.</param>         </member>     </members> </doc> You can see nothing about code contracts here. Enabling code contracts documentation Code contracts have their own settings and conditions for documentation. Open project properties and move to Code Contracts tab. From “Contract Reference Assembly” dropdown check Build and make check to checkbox “Emit contracts into XML doc file”. And again – save project setting, build the project and move to bin/Debug folder. Now you can see that there are two files for XML-documentation: <assembly name>.XML <assembly name>.old.XML First files is documentation with contracts, second file is original documentation without contracts. Let’s see now what is inside our new XML-documentation file. <?xml version="1.0"?> <doc>   <assembly>     <name>Eneta.Examples.CodeContracts.Testable</name>   </assembly>   <members>     <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">       <summary>             Class for generating random integers in user specified range.             </summary>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">       <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>       <param name="generator">Instance of random number generator.</param>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">       <summary>             Returns random integer in given range.             </summary>       <param name="min">Minimum value of random integer.</param>       <param name="max">Maximum value of random integer.</param>       <requires description="Min must be less than max" exception="T:System.ArgumentOutOfRangeException">                 min &lt; max</requires>       <exception cref="T:System.ArgumentOutOfRangeException">                 min &gt;= max</exception>       <ensures description="Return value is out of range">                 Contract.Result&lt;int&gt;() &gt;= min &amp;&amp;                 Contract.Result&lt;int&gt;() &lt;= max</ensures>     </member>   </members> </doc> As you can see then code contracts are pretty well documented. Messages that I provided with code contracts are also available in documentation. If I wrote very good and informative messages then these messages are very useful also in contracts documentation. Code contracts and Sandcastle Sandcastle knows nothing about code contracts by default. There is separate package of file for Sandcastle that is provided you by code contracts installation. You can read from code contracts manual: “Sandcastle (http://www.codeplex.com/Sandcastle) is a freely available tool that generates help les and web sites describing your APIs, based on the XML doc comments in your source code. The CodeContracts install contains a set of les that can be copied over a Sandcastle installation to take advantage of the additional contract information. The produced documentation adds a contract section to methods with declared requires and/or ensures. In order for Sandcastle to produce Contract sections, you need to patch a number of files in its installation. Please refer to the Sandcastle Readme.txt found under Start Menu/CodeContracts/Sandcastle for instructions. A future release of Sandcastle will hopefully support contract sections without the need for this patching step.” Integrating code contracts documentation to Sandcastle will be one of my next postings about code contracts. Conclusion if you are using code documentation then documentation about code contracts can be added to documentation very easily. All you have to do is to enable XML-documentation for contracts and build your project. Later you can use Sandcastle files provided by code contracts installer to integrate contracts documentation to your output documentation package.

    Read the article

  • Hardware settings reviewing

    - by dino99
    Get some hardware related errors logged into dmesg: oem@dub:~$ dmesg | grep ata10 [ 1.007989] ata10: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 18 [ 1.691664] ata10: prereset failed (errno=-19) [ 1.691670] ata10: reset failed, giving up oem@dub:~$ dmesg | grep ata2 [ 0.990290] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 45 [ 1.688011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.688055] ata2.00: unsupported device, disabling [ 1.688057] ata2.00: disabled As I understand, its related to my old Seagate SATA HDD, and the PATA CDROM. These errors are quite new, so I feel that their settings (dma, write-cache, ...) have been modified by some upgrades. I've already used hdparm to set write-cache off on the HDDs. But it seems like I need to review some other setting(s) too. With oldest distro it was easy to know about the hardware settings, but now on Quantal/Precise its deeply hidden for the average user. So i would like to know how to view/modify these settings. About the CDROM reader, the problem is different: - the system don't identify it with an UUID; but only with ATAPI or by-id oem@dub:~$ dmesg|grep 'ATAPI' [ 1.308611] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 oem@dub:~$ ls -l /dev/disk/by-id/ ...... lrwxrwxrwx 1 root root 9 oct. 1 06:42 ata-TSSTcorp_CDDVDW_SH-S203D -> ../../sr0 .....

    Read the article

  • Best way to indicate more results available

    - by Alex Stangl
    We have a service to return messages. We want to limit the number returned, either allowing the caller to specify the max number to return, or else to use an internal hard limit. We also have thought it would be nice to include in the response whether more messages are available. The "best" way to go about this is not clear. Here are some ideas so far: Only set the "more messages" indicator if the user did not specify a max limit, and the internal max limit was hit. Same as #1 except that "more messages" indicator set regardless of whether the internal hard limit is hit, or the user-specified limit is hit. Same as #1 (or #2) except that we internally read limit + 1 records, but only return limit records, so we know "for sure" there is at least one additional message rather than "maybe" there are additional messages. Do away with the "more messages" flag, as it is confusing and unnecessary. Instead force the user to keep calling the API until it returns no messages. Change "more messages" indicator to something more akin to an EOF indicator, only set when the last message is known to have been retrieved and returned. What do you think is the best solution? (Doesn't have to be one of the above choices.) I searched and couldn't find a similar question already asked. Hopefully this is not "too subjective".

    Read the article

  • How to access an encrypted INI file from C on an embedded system with little RAM

    - by Mawg
    I want to encrypt an INI file using a Delphi program on a Windows PC. Then I need to decrypt & access it in C on an embedded system with little RAM. I will do that once & fetch all info; I will not be consutinuously accessing the INI file whenever my program needs data from the file. Any advice as to which encryption to use? Nothing too heavyweight, just good enough for "Security through obscurity" and FOSS for both Delphi & C. And how can I decrypt, get all the info from the INI file - using as little RAM as possible, and then free any allocated RAM? I hope that someone can help. [Update] I am currently using an Atmel UC3, although I am not sure if that will be the final case. It has 512kB falsh & 128kB RAM. For an INI file, I am talking of max 8 sections, with a total of max 256 entries, each max 8 chars. I chose INI (but am not married to it), because i have had major problems in the past when the format of a data fiel changes, no matter whether binary, or text. For tex, I prefer the free format of INI (on PC), but suppose I could switch to line_1=data_1, line_2=data_2 and accept that if I add new fields in future software erleases they must come at the end, even if it is not pretty when read directly by humans. I suppose if I choose a fixed format text file then I never need get more than one line into RAM at a time ...

    Read the article

  • How to handle a player's level and its consequent privileges?

    - by Songo
    I'm building a game similar to Mafia Wars where a player can do tasks for his gang and gain experience and thus advancing his level. The game is built using PHP and a Mysql database. In the game I want to limit the resources allowed to player based on his level. For example: ________| (Max gold) | (Max army size) | (Max moves) | ... Level 1 | 1000 | 100 | 10 | ... Level 2 | 1500 | 200 | 20 | ... Level 3 | 3000 | 300 | 25 | ... . . . In addition certain features of the game won't be allowed until a certain level is reached such as players under Level 10 can't trade in the game market, players under Level 20 can't create alliances,...etc. The way I have modeled it is by implementing a very loooong ACL (Access Control List) with about 100 entries (an entry for each level). However, I think there may be a simpler approach to this seeing that this feature have been implemented in many games before.

    Read the article

  • New SQLOS features in SQL Server 2012

    - by SQLOS Team
    Here's a quick summary of SQLOS feature enhancements going into SQL Server 2012. Most of these are already in the CTP3 pre-release, except for the Resource Governor enhancements which will be in the release candidate. We've blogged about a couple of these items before. I plan to add detail. Let me know which ones you'd like to see more on: - Memory Manager Redesign: Predictable sizing and governing SQL memory consumption: sp_configure ‘max server memory’ now limits all memory committed by SQL ServerResource Governor governs all SQL memory consumption (other than special cases like buffer pool) Improved scalability of complex queries and operations that make >8K allocations Improved CPU and NUMA locality for memory accesses Single memory manager that handles page allocations of all sizes Consistent Out-of-memory handling & management across different internal components - Optimized Memory Broker for Column Store indexes (Project Apollo) - Resource Governor Support larger scale multi-tenancy by increasing Max. number of resource pools20 -> 64 [for 64-bit] Enable predictable chargeback and isolation by adding a hard cap on CPU usage Enable vertical isolation of machine resources Resource pools can be affinitized to individual or groups of schedulers or to NUMA nodes New DMV for resource pool affinity  - CLR 4 support, adds .NET Framework 4 advantages - sp_server_dianostics Captures diagnostic data and health information about SQL Server to detect potential failures Analyze internal system state Reliable when nothing else is working   - New SQLOS DMVs (in 2008 R2SP1) SQL Server related configuration - New DMVsys.dm_server_services OS related resource configurationNew DMVssys.dm_os_volume_statssys.dm_os_windows_infosys.dm_server_registry XEvents for SQL and OS related Perfmon counters Extend sys.dm_os_sys_info See previous blog posts here and here. - Scale / Mission critical Increased scalability: Support Windows 8 max memory and logical processorsDynamic Memory support in Standard Edition - Hot-Add Memory enabled when virtualized - Various Tier1 Performance Improvements, including reduced instructions for superlatches. Originally posted at http://blogs.msdn.com/b/sqlosteam/

    Read the article

  • Multiple monitors showing same screen but different resolutions

    - by Luis Alvarado
    Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

    Read the article

  • Is writing recursive functions hard for you?

    - by null
    I'm taking a computer science course now. I feel it is so hard compared to my polytechnic IT course. I can't understand recursive methods well. How do you manage to get your brain to understand it? When the recursive method returns back, my brain can not trace it nicely. Is there a better way to understand recursion? How do you start learning it? Is it normal that feel that it is very hard at then beginning? Look at the example, I'm very surprised how can I write this if it appears in exam. public class Permute { public static void main(String[] args) { new Permute().printPerms(3); } boolean[] used; int max; public void printPerms(int size) { used = new boolean[size]; max = size; for (int i = 0; i < size; i++) { used[i] = false; } perms(size, ""); } public void perms(int remaining, String res) { if (remaining == 0) { System.out.println(res); } else { for (int i = 0; i < max; i++) { if (!(used[i])) { used[i] = true; perms(remaining - 1, res + " " + i); used[i] = false; } } } } }

    Read the article

  • How to rotate a group of objects around a common center?

    - by user1662292
    I've made a model in 3D Studio Max 9. It consists of a variety of cubes, clyinders etc. In XNA I've imported the model okay and it shows correctly. However, when I apply rotation, each component in the model rotates around it's own centre. I want the model to rotate as a single unit. I've linked the components in 3D Max and they rotate as I want in Max. protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); model = Content.Load<Model>("Models/Alien1"); } protected override void Update(GameTime gameTime) { camera.Update(1f, new Vector3(), graphics.GraphicsDevice.Viewport.AspectRatio); rotation += 0.1f; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); Matrix[] transforms = new Matrix[model.Bones.Count]; model.CopyAbsoluteBoneTransformsTo(transforms); Matrix worldMatrix = Matrix.Identity; Matrix rotationYMatrix = Matrix.CreateRotationY(rotation); Matrix translateMatrix = Matrix.CreateTranslation(location); worldMatrix = rotationYMatrix * translateMatrix; foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = worldMatrix * transforms[mesh.ParentBone.Index]; effect.View = camera.viewMatrix; effect.Projection = camera.projectionMatrix; effect.EnableDefaultLighting(); effect.PreferPerPixelLighting = true; } mesh.Draw(); } base.Draw(gameTime); } More Info: Rotating the object via it's properties works fine so I'm guessing there's something up with the code rather than with the object itself. Translating the object also causes the objects to get moved independently of each other rather than as a single model and each piece becomes spread around the scene. The model is in .X format.

    Read the article

  • Object oriented n-tier design. Am I abstracting too much? Or not enough?

    - by max
    Hi guys, I'm building my first enterprise grade solution (at least I'm attempting to make it enterprise grade). I'm trying to follow best practice design patterns but am starting to worry that I might be going too far with abstraction. I'm trying to build my asp.net webforms (in C#) app as an n-tier application. I've created a Data Access Layer using an XSD strongly-typed dataset that interfaces with a SQL server backend. I access the DAL through some Business Layer Objects that I've created on a 1:1 basis to the datatables in the dataset (eg, a UsersBLL class for the Users datatable in the dataset). I'm doing checks inside the BLL to make sure that data passed to DAL is following the business rules of the application. That's all well and good. Where I'm getting stuck though is the point at which I connect the BLL to the presentation layer. For example, my UsersBLL class deals mostly with whole datatables, as it's interfacing with the DAL. Should I now create a separate "User" (Singular) class that maps out the properties of a single user, rather than multiple users? This way I don't have to do any searching through datatables in the presentation layer, as I could use the properties created in the User class. Or would it be better to somehow try to handle this inside the UsersBLL? Sorry if this sounds a little complicated... Below is the code from the UsersBLL: using System; using System.Data; using PedChallenge.DAL.PedDataSetTableAdapters; [System.ComponentModel.DataObject] public class UsersBLL { private UsersTableAdapter _UsersAdapter = null; protected UsersTableAdapter Adapter { get { if (_UsersAdapter == null) _UsersAdapter = new UsersTableAdapter(); return _UsersAdapter; } } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, true)] public PedChallenge.DAL.PedDataSet.UsersDataTable GetUsers() { return Adapter.GetUsers(); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, false)] public PedChallenge.DAL.PedDataSet.UsersDataTable GetUserByUserID(int userID) { return Adapter.GetUserByUserID(userID); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, false)] public PedChallenge.DAL.PedDataSet.UsersDataTable GetUsersByTeamID(int teamID) { return Adapter.GetUsersByTeamID(teamID); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, false)] public PedChallenge.DAL.PedDataSet.UsersDataTable GetUsersByEmail(string Email) { return Adapter.GetUserByEmail(Email); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Insert, true)] public bool AddUser(int? teamID, string FirstName, string LastName, string Email, string Role, int LocationID) { // Create a new UsersRow instance PedChallenge.DAL.PedDataSet.UsersDataTable Users = new PedChallenge.DAL.PedDataSet.UsersDataTable(); PedChallenge.DAL.PedDataSet.UsersRow user = Users.NewUsersRow(); if (UserExists(Users, Email) == true) return false; if (teamID == null) user.SetTeamIDNull(); else user.TeamID = teamID.Value; user.FirstName = FirstName; user.LastName = LastName; user.Email = Email; user.Role = Role; user.LocationID = LocationID; // Add the new user Users.AddUsersRow(user); int rowsAffected = Adapter.Update(Users); // Return true if precisely one row was inserted, // otherwise false return rowsAffected == 1; } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Update, true)] public bool UpdateUser(int userID, int? teamID, string FirstName, string LastName, string Email, string Role, int LocationID) { PedChallenge.DAL.PedDataSet.UsersDataTable Users = Adapter.GetUserByUserID(userID); if (Users.Count == 0) // no matching record found, return false return false; PedChallenge.DAL.PedDataSet.UsersRow user = Users[0]; if (teamID == null) user.SetTeamIDNull(); else user.TeamID = teamID.Value; user.FirstName = FirstName; user.LastName = LastName; user.Email = Email; user.Role = Role; user.LocationID = LocationID; // Update the product record int rowsAffected = Adapter.Update(user); // Return true if precisely one row was updated, // otherwise false return rowsAffected == 1; } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Delete, true)] public bool DeleteUser(int userID) { int rowsAffected = Adapter.Delete(userID); // Return true if precisely one row was deleted, // otherwise false return rowsAffected == 1; } private bool UserExists(PedChallenge.DAL.PedDataSet.UsersDataTable users, string email) { // Check if user email already exists foreach (PedChallenge.DAL.PedDataSet.UsersRow userRow in users) { if (userRow.Email == email) return true; } return false; } } Some guidance in the right direction would be greatly appreciated!! Thanks all! Max

    Read the article

  • Google Chrome audit on caching

    - by Álvaro G. Vicario
    If I run an audit on my sites with Google Chrome, I get this message in the Leverage browser caching section: The following resources are missing a cache expiration. Resources that do not specify an expiration may not be cached by browsers: A list of all the pictures follows. I get a similar notice in Leverage proxy caching: Consider adding a "Cache-Control: public" header to the following resources: Apart from pictures, I also get a notice about HTML, CSS and JavaScript files: The following resources are explicitly non-cacheable. Consider making them cacheable if possible: Its funny because I've worked hard to cache all static contents (except for pictures, where I just left Apache's default settings). Firefox does indeed store all these items in cache. Is there anything I should improve in my HTTP headers? Here's the complete header set of some items as loaded after removing the browser caché. Pictures use default settings I didn't really check before, the rest should be cachéd for three hours. I can set headers with both .htaccess and PHP. PNG HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:46:14 GMT Server: Apache Last-Modified: Thu, 18 Mar 2010 21:40:54 GMT Etag: "c48024-230-4821a15d6c580" Accept-Ranges: bytes Content-Length: 560 Keep-Alive: timeout=4 Connection: Keep-Alive Content-Type: image/png HTML HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:46:13 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:46:13 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Wed, 24 Mar 2010 20:30:36 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-15 CSS HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:48:21 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:48:21 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Thu, 18 Mar 2010 21:40:12 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/css JavaScript HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:48:21 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:48:21 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Thu, 18 Mar 2010 21:40:12 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: application/x-javascript Update I've tested Jumby's suggestion and set my CSS's expire to 1 year: Cache-Control:max-age=31536000, s-maxage=31536000, must-revalidate, proxy-revalidate Connection:Keep-Alive Content-Encoding:gzip Content-Length:4198 Content-Type:text/css Date:Mon, 02 Aug 2010 20:48:56 GMT Expires:Tue, 02 Aug 2011 20:48:56 GMT Keep-Alive:timeout=5, max=99 Last-Modified:Thu, 18 Mar 2010 20:40:12 GMT Server:Apache/2.2.14 (Win32) PHP/5.3.1 Vary:Accept-Encoding X-Powered-By:PHP/5.3.1 However, Chrome still claims "explicitly non-cacheable".

    Read the article

  • JVM throws OutOfMemory during gc though there are plenty memory left...

    - by Shu L.
    I have my java application configured to use 5G memory. I got an OutOfMemory out of blue. I inspected the gc log and found plenty of memory left: young generation occupies 4% allocated space, tenure generation occupancy is 5% and perm generation is 43%. I am puzzled why JVM throws an OutOfMemory at the gc time. Does anyone know why this is happening? Your help is greatly appreciated. JVM memory and gc settings: -server -Xms5g -Xmx5g -Xss256k -XX:NewSize=2g -XX:MaxNewSize=2g -XX:+UseParallelOldGC -XX:+UseTLAB -XX:SurvivorRatio=8 -XX:TargetSurvivorRatio=90 -XX:+DisableExplicitGC gc.log 2009-09-19T03:34:59.741+0000: 92836.778: [GC Desired survivor size 152567808 bytes, new threshold 1 (max 15) [PSYoungGen: 1941492K-144057K(1947072K)] 3138022K-1340830K(5092800K), 0.1947640 secs] [Times: user=0.61 sys=0.01, real=0.19 secs] 2009-09-19T03:35:29.918+0000: 92866.954: [GC Desired survivor size 152109056 bytes, new threshold 1 (max 15) [PSYoungGen: 1941625K-144049K(1948608K)] 3138398K-1341080K(5094336K), 0.1942000 secs] [Times: user=0.61 sys=0.01, real=0.20 secs] 2009-09-19T03:35:56.883+0000: 92893.920: [GC Desired survivor size 156565504 bytes, new threshold 1 (max 15) [PSYoungGen: 1567994K-115427K(1915072K)] 2765026K-1312820K(5060800K), 0.1586320 secs] [Times: user=0.50 sys=0.01, real=0.16 secs] 2009-09-19T03:35:57.042+0000: 92894.079: [GC Desired survivor size 179961856 bytes, new threshold 1 (max 15) [PSYoungGen: 115427K-0K(1898560K)] 1312820K-1313987K(5044288K), 0.0775650 secs] [Times: user=0.42 sys=0.19, real=0.08 secs] 2009-09-19T03:35:57.120+0000: 92894.157: [Full GC [PSYoungGen: 0K-0K(1898560K)] [ParOldGen: 1313987K-159522K(3145728K)] 1313987K-159522K(5044288K) [PSPermGen: 20025K-19942K(40256K)], 0.56923 00 secs] [Times: user=2.18 sys=0.05, real=0.57 secs] 2009-09-19T03:35:57.690+0000: 92894.726: [GC Desired survivor size 197066752 bytes, new threshold 1 (max 15) [PSYoungGen: 0K-0K(1745728K)] 159522K-159522K(4891456K), 0.0072590 secs] [Times: user=0.01 sys=0.00, real=0.00 secs] 2009-09-19T03:35:57.698+0000: 92894.734: [Full GC [PSYoungGen: 0K-0K(1745728K)] [ParOldGen: 159522K-158627K(3145728K)] 159522K-158627K(4891456K) [PSPermGen: 19942K-19934K(45504K)], 0.3280480 secs] [Times: user=1.46 sys=0.00, real=0.33 secs] Heap PSYoungGen total 1745728K, used 87233K [0x00002aab73650000, 0x00002aabf3650000, 0x00002aabf3650000) eden space 1745664K, 4% used [0x00002aab73650000,0x00002aab78b80778,0x00002aabddf10000) from space 64K, 0% used [0x00002aabddf10000,0x00002aabddf10000,0x00002aabddf20000) to space 192448K, 0% used [0x00002aabe7a60000,0x00002aabe7a60000,0x00002aabf3650000) ParOldGen total 3145728K, used 158627K [0x00002aaab3650000, 0x00002aab73650000, 0x00002aab73650000) object space 3145728K, 5% used [0x00002aaab3650000,0x00002aaabd138d28,0x00002aab73650000) PSPermGen total 45504K, used 19965K [0x00002aaaae250000, 0x00002aaab0ec0000, 0x00002aaab3650000) object space 45504K, 43% used [0x00002aaaae250000,0x00002aaaaf5cf668,0x00002aaab0ec0000) I am on 64-bit Linux and JRE 1.6.0_10: $uname -a Linux x 2.6.24-etchnhalf.1-amd64 #1 SMP Tue Oct 14 03:11:45 UTC 2008 x86_64 GNU/Linux $java -version java version "1.6.0_10" Java(TM) SE Runtime Environment (build 1.6.0_10-b33) Java HotSpot(TM) 64-Bit Server VM (build 11.0-b15, mixed mode)

    Read the article

  • How to do a search from a list with non-prefix keywords

    - by aNui
    First of all, sorry if my english or my post got any mistakes. I am programming a program to search the name from the list and I need to find them if the keyword is not in front of the names (that's what I mean non-prefix) e.g. if I my list is the music instruments and I type "guit" to the search textbox. It should find the names "Guitar, Guitarrón, Acoustic Guitar, Bass Guitar, ..." or something like this Longdo Dictionary's search suggestion. here is my simple and stupid algorithm (that's all I can do) const int SEARCHROWLIMIT = 30; private string[] DoSearch(string Input, string[] ListToSearch) { List<string> FoundNames = new List<string>(); int max = 0; bool over = false; for (int k = 0; !over; k++) { foreach (string item in ListToSearch) { max = (max > item.Length) ? max : item.Length; if (k > item.Length) continue; if (k >= max) { over = true; break; } if (!Input.Equals("Search") && item.Substring(k, item.Length - k).StartsWith(Input, StringComparison.OrdinalIgnoreCase)) { bool exist = false; int i = 0; while (!exist && i < FoundNames.Count) { if (item.Equals(FoundNames[i])) { exist = true; break; } i++; } if (!exist && FoundNames.Count < SEARCHROWLIMIT) FoundNames.Add(item); else if (FoundNames.Count >= SEARCHROWLIMIT) over = true; } } } return FoundNames.ToArray(); } I think this algorithm is too slow for a large number of names and after several trial-and-error, I decided to add SEARCHROWLIMIT to breaks the operation And I also think there're some readymade methods that can do that. And another problem is I need to search music instruments by a category like strings, percussions, ... and by the country of origins. So I need to search them with filter by type and country. please help me. P.S. Me and my friends are just student from Thailand and developing the project to compete in Microsoft Imagine Cup 2010 and please become fan on our facebook page [KRATIB][3]. And we're so sorry we don't have much information in English but you can talk to us in English.

    Read the article

  • How to do a search from a list with non-prefix keywords[Solved]

    - by aNui
    The Problem is Solved. Thanks for every answers. First of all, sorry if my english or my post got any mistakes. I am programming a program to search the name from the list and I need to find them even if the keyword is not in front of the names (that's what I mean non-prefix) e.g. if I my list is the music instruments and I type "guit" to the search textbox. It should find the names "Guitar, Guitarrón, Acoustic Guitar, Bass Guitar, ..." or something like this Longdo Dictionary's search suggestion. here is my simple and stupid algorithm (that's all I can do) const int SEARCHROWLIMIT = 30; private string[] DoSearch(string Input, string[] ListToSearch) { List<string> FoundNames = new List<string>(); int max = 0; bool over = false; for (int k = 0; !over; k++) { foreach (string item in ListToSearch) { max = (max > item.Length) ? max : item.Length; if (k > item.Length) continue; if (k >= max) { over = true; break; } if (!Input.Equals("Search") && item.Substring(k, item.Length - k).StartsWith(Input, StringComparison.OrdinalIgnoreCase)) { bool exist = false; int i = 0; while (!exist && i < FoundNames.Count) { if (item.Equals(FoundNames[i])) { exist = true; break; } i++; } if (!exist && FoundNames.Count < SEARCHROWLIMIT) FoundNames.Add(item); else if (FoundNames.Count >= SEARCHROWLIMIT) over = true; } } } return FoundNames.ToArray(); } I think this algorithm is too slow for a large number of names and after several trial-and-error, I decided to add SEARCHROWLIMIT to breaks the operation And I also think there're some readymade methods that can do that. And another problem is I need to search music instruments by a category like strings, percussions, ... and by the country of origins. So I need to search them with filter by type and country. please help me. P.S. Me and my friends are just student from Thailand and developing the project to compete in Microsoft Imagine Cup 2010 and please become fan on our facebook page [KRATIB][3]. And we're so sorry we don't have much information in English but you can talk to us in English.

    Read the article

  • [C#] How to do a search from a list with non-prefix keywords

    - by aNui
    First of all, sorry if my english or my post got any mistakes. I am programming a program to search the name from the list and I need to find them if the keyword is not in front of the names (that's what I mean non-prefix) e.g. if I my list is the music instruments and I type "guit" to the search textbox. It should find the names "Guitar, Guitarrón, Acoustic Guitar, Bass Guitar, ..." or something like this Longdo Dictionary's search suggestion. here is my simple and stupid algorithm (that's all I can do) const int SEARCHROWLIMIT = 30; private string[] DoSearch(string Input, string[] ListToSearch) { List<string> FoundNames = new List<string>(); int max = 0; bool over = false; for (int k = 0; !over; k++) { foreach (string item in ListToSearch) { max = (max > item.Length) ? max : item.Length; if (k > item.Length) continue; if (k >= max) { over = true; break; } if (!Input.Equals("Search") && item.Substring(k, item.Length - k).StartsWith(Input, StringComparison.OrdinalIgnoreCase)) { bool exist = false; int i = 0; while (!exist && i < FoundNames.Count) { if (item.Equals(FoundNames[i])) { exist = true; break; } i++; } if (!exist && FoundNames.Count < SEARCHROWLIMIT) FoundNames.Add(item); else if (FoundNames.Count >= SEARCHROWLIMIT) over = true; } } } return FoundNames.ToArray(); } I think this algorithm is too slow for a large number of names and after several trial-and-error, I decided to add SEARCHROWLIMIT to breaks the operation And I also think there're some readymade methods that can do that. And another problem is I need to search music instruments by a category like strings, percussions, ... and by the country of origins. So I need to search them with filter by type and country. please help me. P.S. Me and my friends are just student from Thailand and developing the project to compete in Microsoft Imagine Cup 2010 and please become fan on our facebook page [KRATIB][3]. And we're so sorry we don't have much information in English but you can talk to us in English.

    Read the article

  • Sniffing out SQL Code Smells: Inconsistent use of Symbolic names and Datatypes

    - by Phil Factor
    It is an awkward feeling. You’ve just delivered a database application that seems to be working fine in production, and you just run a few checks on it. You discover that there is a potential bug that, out of sheer good chance, hasn’t kicked in to produce an error; but it lurks, like a smoking bomb. Worse, maybe you find that the bug has started its evil work of corrupting the data, but in ways that nobody has, so far detected. You investigate, and find the damage. You are somehow going to have to repair it. Yes, it still very occasionally happens to me. It is not a nice feeling, and I do anything I can to prevent it happening. That’s why I’m interested in SQL code smells. SQL Code Smells aren’t necessarily bad practices, but just show you where to focus your attention when checking an application. Sometimes with databases the bugs can be subtle. SQL is rather like HTML: the language does its best to try to carry out your wishes, rather than to be picky about your bugs. Most of the time, this is a great benefit, but not always. One particular place where this can be detrimental is where you have implicit conversion between different data types. Most of the time it is completely harmless but we’re  concerned about the occasional time it isn’t. Let’s give an example: String truncation. Let’s give another even more frightening one, rounding errors on assignment to a number of different precision. Each requires a blog-post to explain in detail and I’m not now going to try. Just remember that it is not always a good idea to assign data to variables, parameters or even columns when they aren’t the same datatype, especially if you are relying on implicit conversion to work its magic.For details of the problem and the consequences, see here:  SR0014: Data loss might occur when casting from {Type1} to {Type2} . For any experienced Database Developer, this is a more frightening read than a Vampire Story. This is why one of the SQL Code Smells that makes me edgy, in my own or other peoples’ code, is to see parameters, variables and columns that have the same names and different datatypes. Whereas quite a lot of this is perfectly normal and natural, you need to check in case one of two things have gone wrong. Either sloppy naming, or mixed datatypes. Sure it is hard to remember whether you decided that the length of a log entry was 80 or 100 characters long, or the precision of a number. That is why a little check like this I’m going to show you is excellent for tidying up your code before you check it back into source Control! 1/ Checking Parameters only If you were just going to check parameters, you might just do this. It simply groups all the parameters, either input or output, of all the routines (e.g. stored procedures or functions) by their name and checks to see, in the HAVING clause, whether their data types are all the same. If not, it lists all the examples and their origin (the routine) Even this little check can occasionally be scarily revealing. ;WITH userParameter AS  ( SELECT   c.NAME AS ParameterName,  OBJECT_SCHEMA_NAME(c.object_ID) + '.' + OBJECT_NAME(c.object_ID) AS ObjectName,  t.name + ' '     + CASE     --we may have to put in the length            WHEN t.name IN ('char', 'varchar', 'nchar', 'nvarchar')             THEN '('               + CASE WHEN c.max_length = -1 THEN 'MAX'                ELSE CONVERT(VARCHAR(4),                    CASE WHEN t.name IN ('nchar', 'nvarchar')                      THEN c.max_length / 2 ELSE c.max_length                    END)                END + ')'         WHEN t.name IN ('decimal', 'numeric')             THEN '(' + CONVERT(VARCHAR(4), c.precision)                   + ',' + CONVERT(VARCHAR(4), c.Scale) + ')'         ELSE ''      END  --we've done with putting in the length      + CASE WHEN XML_collection_ID <> 0         THEN --deal with object schema names             '(' + CASE WHEN is_XML_Document = 1                    THEN 'DOCUMENT '                    ELSE 'CONTENT '                   END              + COALESCE(               (SELECT QUOTENAME(ss.name) + '.' + QUOTENAME(sc.name)                FROM sys.xml_schema_collections sc                INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID                WHERE sc.xml_collection_ID = c.XML_collection_ID),'NULL') + ')'          ELSE ''         END        AS [DataType]  FROM sys.parameters c  INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID  WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys'   AND parameter_id>0)SELECT CONVERT(CHAR(80),objectName+'.'+ParameterName),DataType FROM UserParameterWHERE ParameterName IN   (SELECT ParameterName FROM UserParameter    GROUP BY ParameterName    HAVING MIN(Datatype)<>MAX(DataType))ORDER BY ParameterName   so, in a very small example here, we have a @ClosingDelimiter variable that is only CHAR(1) when, by the looks of it, it should be up to ten characters long, or even worse, a function that should be a char(1) and seems to let in a string of ten characters. Worth investigating. Then we have a @Comment variable that can't decide whether it is a VARCHAR(2000) or a VARCHAR(MAX) 2/ Columns and Parameters Actually, once we’ve cleared up the mess we’ve made of our parameter-naming in the database we’re inspecting, we’re going to be more interested in listing both columns and parameters. We can do this by modifying the routine to list columns as well as parameters. Because of the slight complexity of creating the string version of the datatypes, we will create a fake table of both columns and parameters so that they can both be processed the same way. After all, we want the datatypes to match Unfortunately, parameters do not expose all the attributes we are interested in, such as whether they are nullable (oh yes, subtle bugs happen if this isn’t consistent for a datatype). We’ll have to leave them out for this check. Voila! A slight modification of the first routine ;WITH userObject AS  ( SELECT   Name AS DataName,--the actual name of the parameter or column ('@' removed)  --and the qualified object name of the routine  OBJECT_SCHEMA_NAME(ObjectID) + '.' + OBJECT_NAME(ObjectID) AS ObjectName,  --now the harder bit: the definition of the datatype.  TypeName + ' '     + CASE     --we may have to put in the length. e.g. CHAR (10)           WHEN TypeName IN ('char', 'varchar', 'nchar', 'nvarchar')             THEN '('               + CASE WHEN MaxLength = -1 THEN 'MAX'                ELSE CONVERT(VARCHAR(4),                    CASE WHEN TypeName IN ('nchar', 'nvarchar')                      THEN MaxLength / 2 ELSE MaxLength                    END)                END + ')'         WHEN TypeName IN ('decimal', 'numeric')--a BCD number!             THEN '(' + CONVERT(VARCHAR(4), Precision)                   + ',' + CONVERT(VARCHAR(4), Scale) + ')'         ELSE ''      END  --we've done with putting in the length      + CASE WHEN XML_collection_ID <> 0 --tush tush. XML         THEN --deal with object schema names             '(' + CASE WHEN is_XML_Document = 1                    THEN 'DOCUMENT '                    ELSE 'CONTENT '                   END              + COALESCE(               (SELECT TOP 1 QUOTENAME(ss.name) + '.' + QUOTENAME(sc.Name)                FROM sys.xml_schema_collections sc                INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID                WHERE sc.xml_collection_ID = XML_collection_ID),'NULL') + ')'          ELSE ''         END        AS [DataType],       DataObjectType  FROM   (Select t.name AS TypeName, REPLACE(c.name,'@','') AS Name,          c.max_length AS MaxLength, c.precision AS [Precision],           c.scale AS [Scale], c.[Object_id] AS ObjectID, XML_collection_ID,          is_XML_Document,'P' AS DataobjectType  FROM sys.parameters c  INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID  AND parameter_id>0  UNION all  Select t.name AS TypeName, c.name AS Name, c.max_length AS MaxLength,          c.precision AS [Precision], c.scale AS [Scale],          c.[Object_id] AS ObjectID, XML_collection_ID,is_XML_Document,          'C' AS DataobjectType            FROM sys.columns c  INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID   WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys'  )f)SELECT CONVERT(CHAR(80),objectName+'.'   + CASE WHEN DataobjectType ='P' THEN '@' ELSE '' END + DataName),DataType FROM UserObjectWHERE DataName IN   (SELECT DataName FROM UserObject   GROUP BY DataName    HAVING MIN(Datatype)<>MAX(DataType))ORDER BY DataName     Hmm. I can tell you I found quite a few minor issues with the various tabases I tested this on, and found some potential bugs that really leap out at you from the results. Here is the start of the result for AdventureWorks. Yes, AccountNumber is, for some reason, a Varchar(10) in the Customer table. Hmm. odd. Why is a city fifty characters long in that view?  The idea of the description of a colour being 256 characters long seems over-ambitious. Go down the list and you'll spot other mistakes. There are no bugs, but just mess. We started out with a listing to examine parameters, then we mixed parameters and columns. Our last listing is for a slightly more in-depth look at table columns. You’ll notice that we’ve delibarately removed the indication of whether a column is persisted, or is an identity column because that gives us false positives for our code smells. If you just want to browse your metadata for other reasons (and it can quite help in some circumstances) then uncomment them! ;WITH userColumns AS  ( SELECT   c.NAME AS columnName,  OBJECT_SCHEMA_NAME(c.object_ID) + '.' + OBJECT_NAME(c.object_ID) AS ObjectName,  REPLACE(t.name + ' '   + CASE WHEN is_computed = 1 THEN ' AS ' + --do DDL for a computed column          (SELECT definition FROM sys.computed_columns cc           WHERE cc.object_id = c.object_id AND cc.column_ID = c.column_ID)     --we may have to put in the length            WHEN t.Name IN ('char', 'varchar', 'nchar', 'nvarchar')             THEN '('               + CASE WHEN c.Max_Length = -1 THEN 'MAX'                ELSE CONVERT(VARCHAR(4),                    CASE WHEN t.Name IN ('nchar', 'nvarchar')                      THEN c.Max_Length / 2 ELSE c.Max_Length                    END)                END + ')'       WHEN t.name IN ('decimal', 'numeric')       THEN '(' + CONVERT(VARCHAR(4), c.precision) + ',' + CONVERT(VARCHAR(4), c.Scale) + ')'       ELSE ''      END + CASE WHEN c.is_rowguidcol = 1          THEN ' ROWGUIDCOL'          ELSE ''         END + CASE WHEN XML_collection_ID <> 0            THEN --deal with object schema names             '(' + CASE WHEN is_XML_Document = 1                THEN 'DOCUMENT '                ELSE 'CONTENT '               END + COALESCE((SELECT                QUOTENAME(ss.name) + '.' + QUOTENAME(sc.name)                FROM                sys.xml_schema_collections sc                INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID                WHERE                sc.xml_collection_ID = c.XML_collection_ID),                'NULL') + ')'            ELSE ''           END + CASE WHEN is_identity = 1             THEN CASE WHEN OBJECTPROPERTY(object_id,                'IsUserTable') = 1 AND COLUMNPROPERTY(object_id,                c.name,                'IsIDNotForRepl') = 0 AND OBJECTPROPERTY(object_id,                'IsMSShipped') = 0                THEN ''                ELSE ' NOT FOR REPLICATION '               END             ELSE ''            END + CASE WHEN c.is_nullable = 0               THEN ' NOT NULL'               ELSE ' NULL'              END + CASE                WHEN c.default_object_id <> 0                THEN ' DEFAULT ' + object_Definition(c.default_object_id)                ELSE ''               END + CASE                WHEN c.collation_name IS NULL                THEN ''                WHEN c.collation_name <> (SELECT                collation_name                FROM                sys.databases                WHERE                name = DB_NAME()) COLLATE Latin1_General_CI_AS                THEN COALESCE(' COLLATE ' + c.collation_name,                '')                ELSE ''                END,'  ',' ') AS [DataType]FROM sys.columns c  INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID  WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys')SELECT CONVERT(CHAR(80),objectName+'.'+columnName),DataType FROM UserColumnsWHERE columnName IN (SELECT columnName FROM UserColumns  GROUP BY columnName  HAVING MIN(Datatype)<>MAX(DataType))ORDER BY columnName If you take a look down the results against Adventureworks, you'll see once again that there are things to investigate, mostly, in the illustration, discrepancies between null and non-null datatypes So I here you ask, what about temporary variables within routines? If ever there was a source of elusive bugs, you'll find it there. Sadly, these temporary variables are not stored in the metadata so we'll have to find a more subtle way of flushing these out, and that will, I'm afraid, have to wait!

    Read the article

  • WordPress not resizing images with Nginx + php-fpm and other issues

    - by Julian Fernandes
    Recently i setup a Ubuntu 12.04 VPS with 512mb/1ghz CPU, Nginx + php-fpm + Varnish + APC + Percona's MySQL server + CloudFlare Pro for our Ubuntu LoCo Team's WordPress blog. The blog get about 3~4k daily hits, use about 180MB and 8~20% CPU. Everything seems to be working insanely fast... page load is really good and is about 16x faster than any of our competitors... but there is one problem. When we upload a image, WordPress don't resize it, so all we can do it insert the full image in the post. If the imagem have, let's say, 30kb, it resize fine... but if the image have 100kb+, it won't... In nginx error logs i see this: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "POST /wp-admin/async-upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/wp-admin/media-upload.php?post_id=2668&" It seems to be related with the issue, but i dunno. When that timeout happens, i started to get it when i'm trying to view a post too: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "GET /tutoriais-gimp-6-adicionando-aplicando-novos-pinceis.html HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/" And only a restart of php5-fpm fix it. I tryed increasing some timeouts and stuffs but it did not worked, so i guess it's some kind of limitation i did not figured yet. Could someone help me with it, please? /etc/nginx/nginx.conf: user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 1024; use epoll; multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 15; keepalive_requests 2000; types_hash_max_size 2048; server_tokens off; server_name_in_redirect off; open_file_cache max=1000 inactive=300s; open_file_cache_valid 360s; open_file_cache_min_uses 2; open_file_cache_errors off; server_names_hash_bucket_size 64; # server_name_in_redirect off; client_body_buffer_size 128K; client_header_buffer_size 1k; client_max_body_size 2m; large_client_header_buffers 4 8k; client_body_timeout 10m; client_header_timeout 10m; send_timeout 10m; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## error_log /var/log/nginx/error.log; access_log off; ## # CloudFlare's IPs (uncomment when site goes live) ## set_real_ip_from 204.93.240.0/24; set_real_ip_from 204.93.177.0/24; set_real_ip_from 199.27.128.0/21; set_real_ip_from 173.245.48.0/20; set_real_ip_from 103.22.200.0/22; set_real_ip_from 141.101.64.0/18; set_real_ip_from 108.162.192.0/18; set_real_ip_from 190.93.240.0/20; real_ip_header CF-Connecting-IP; set_real_ip_from 127.0.0.1/32; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 9; gzip_min_length 1000; gzip_proxied expired no-cache no-store private auth; gzip_buffers 32 8k; # gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/fastcgi_params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 4k; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; /etc/nginx/sites-avaiable/default: ## # DEFAULT HANDLER # ubuntubrsc.com ## server { listen 8080; # Make site available from main domain server_name www.ubuntubrsc.com; # Root directory root /var/www; index index.php index.html index.htm; include /var/www/nginx.conf; access_log off; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location ~ /\. { deny all; access_log off; log_not_found off; } location ~* ^/wp-content/uploads/.*.php$ { deny all; access_log off; log_not_found off; } rewrite /wp-admin$ $scheme://$host$uri/ permanent; error_page 404 = @wordpress; log_not_found off; location @wordpress { include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_NAME /index.php; fastcgi_param SCRIPT_FILENAME $document_root/index.php; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; if (-f $request_filename) { fastcgi_pass unix:/var/run/php5-fpm.sock; } } } server { listen 8080; server_name ubuntubrsc.* www.ubuntubrsc.net www.ubuntubrsc.org www.ubuntubrsc.com.br www.ubuntubrsc.info www.ubuntubrsc.in; return 301 $scheme://www.ubuntubrsc.com$request_uri; } /var/www/nginx.conf: # BEGIN W3TC Minify cache location ~ /wp-content/w3tc/min.*\.js$ { types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*\.css$ { types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*js\.gzip$ { gzip off; types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } location ~ /wp-content/w3tc/min.*css\.gzip$ { gzip off; types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } # END W3TC Minify cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; try_files $uri $uri/ $uri.html /index.php?$args; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc .gzip; } if (-f $request_filename$w3tc_enc) { rewrite (.*) $1$w3tc_enc break; } rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Skip 404 error handling by WordPress for static files if (-f $request_filename) { break; } if (-d $request_filename) { break; } if ($request_uri ~ "(robots\.txt|sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { break; } if ($request_uri ~* \.(css|js|htc|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml|asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$) { return 404; } # END W3TC Skip 404 error handling by WordPress for static files # BEGIN Better WP Security location ~ /\.ht { deny all; } location ~ wp-config.php { deny all; } location ~ readme.html { deny all; } location ~ readme.txt { deny all; } location ~ /install.php { deny all; } set $susquery 0; set $rule_2 0; set $rule_3 0; rewrite ^wp-includes/(.*).php /not_found last; rewrite ^/wp-admin/includes(.*)$ /not_found last; if ($request_method ~* "^(TRACE|DELETE|TRACK)"){ return 403; } set $rule_0 0; if ($request_method ~ "POST"){ set $rule_0 1; } if ($uri ~ "^(.*)wp-comments-post.php*"){ set $rule_0 2$rule_0; } if ($http_user_agent ~ "^$"){ set $rule_0 4$rule_0; } if ($rule_0 = "421"){ return 403; } if ($args ~* "\.\./") { set $susquery 1; } if ($args ~* "boot.ini") { set $susquery 1; } if ($args ~* "tag=") { set $susquery 1; } if ($args ~* "ftp:") { set $susquery 1; } if ($args ~* "http:") { set $susquery 1; } if ($args ~* "https:") { set $susquery 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)") { set $susquery 1; } if ($args ~* "mosConfig_[a-zA-Z_]{1,21}(=|%3D)") { set $susquery 1; } if ($args ~* "base64_encode") { set $susquery 1; } if ($args ~* "(%24&x)") { set $susquery 1; } if ($args ~* "(\[|\]|\(|\)|<|>|ê|\"|;|\?|\*|=$)"){ set $susquery 1; } if ($args ~* "(&#x22;|&#x27;|&#x3C;|&#x3E;|&#x5C;|&#x7B;|&#x7C;|%24&x)"){ set $susquery 1; } if ($args ~* "(%0|%A|%B|%C|%D|%E|%F|127.0)") { set $susquery 1; } if ($args ~* "(globals|encode|localhost|loopback)") { set $susquery 1; } if ($args ~* "(request|select|insert|concat|union|declare)") { set $susquery 1; } if ($http_cookie !~* "wordpress_logged_in_" ) { set $susquery "${susquery}2"; set $rule_2 1; set $rule_3 1; } if ($susquery = 12) { return 403; } # END Better WP Security /etc/php5/fpm/php-fpm.conf: pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log emergency_restart_threshold = 3 emergency_restart_interval = 1m process_control_timeout = 10s events.mechanism = epoll /etc/php5/fpm/php.ini (only options i changed): open_basedir ="/var/www/" disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,dl,system,shell_exec,fsockopen,parse_ini_file,passthru,popen,proc_open,proc_close,shell_exec,show_source,symlink,proc_close,proc_get_status,proc_nice,proc_open,proc_terminate,shell_exec ,highlight_file,escapeshellcmd,define_syslog_variables,posix_uname,posix_getpwuid,apache_child_terminate,posix_kill,posix_mkfifo,posix_setpgid,posix_setsid,posix_setuid,escapeshellarg,posix_uname,ftp_exec,ftp_connect,ftp_login,ftp_get,ftp_put,ftp_nb_fput,ftp_raw,ftp_rawlist,ini_alter,ini_restore,inject_code,syslog,openlog,define_syslog_variables,apache_setenv,mysql_pconnect,eval,phpAds_XmlRpc,phpA ds_remoteInfo,phpAds_xmlrpcEncode,phpAds_xmlrpcDecode,xmlrpc_entity_decode,fp,fput,virtual,show_source,pclose,readfile,wget expose_php = off max_execution_time = 30 max_input_time = 60 memory_limit = 128M display_errors = Off post_max_size = 2M allow_url_fopen = off default_socket_timeout = 60 APC settings: [APC] apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 64M apc.optimization = 0 apc.num_files_hint = 4096 apc.ttl = 60 apc.user_ttl = 7200 apc.gc_ttl = 0 apc.cache_by_default = 1 apc.filters = "" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 10M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.localcache = 0 apc.localcache.size = 512 apc.coredump_unmap = 0 apc.stat_ctime = 0 /etc/php5/fpm/pool.d/www.conf user = www-data group = www-data listen = /var/run/php5-fpm.sock listen.owner = www-data listen.group = www-data listen.mode = 0666 pm = ondemand pm.max_children = 5 pm.process_idle_timeout = 3s; pm.max_requests = 50 I also started to get 404 errors in front page if i use W3 Total Cache's Page Cache (Disk Enhanced). It worked fine untill somedays ago, and then, out of nowhere, it started to happen. Tonight i will disable my mobile plugin and activate only W3 Total Cache to see if it's a conflict with them... And to finish all this, i have been getting this error: PHP Warning: apc_store(): Unable to allocate memory for pool. in /var/www/wp-content/plugins/w3-total-cache/lib/W3/Cache/Apc.php on line 41 I already modifed my APC settings, but no sucess. So... could anyone help me with those issuees, please? Ooohh... if it helps, i instaled PHP like this: sudo apt-get install php5-fpm php5-suhosin php-apc php5-gd php5-imagick php5-curl And Nginx from the official PPA. Sorry for my bad english and thanks for your time people! (:

    Read the article

  • BES Express - failed to run Administration Service

    - by Max Gontar
    Hi! I have installed BES Express on Windows Server 7 with Exchange 2007 following by RIM tutorial JDK 1.6.18, JDK\bin included into Path variable After reboot I've run Blackberry Administration Service and receive such error in browser window: HTTP Status 500 - -------------------------------------------------------------------------------- type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: org.apache.hivemind.ApplicationRuntimeException: Missing classpath resource '/com/rim/bes/bas/web/adminconsole/pages/login/SystemError.page'. [context:/WEB-INF/webAdminConsole.application, line 25, column 37] org.apache.tapestry.services.impl.WebRequestServicerPipelineBridge.service(WebRequestServicerPipelineBridge.java:60) $ServletRequestServicer_12d51b7c397.service($ServletRequestServicer_12d51b7c397.java) org.apache.tapestry.request.DecodedRequestInjector.service(DecodedRequestInjector.java:55) $ServletRequestServicerFilter_12d51b7c393.service($ServletRequestServicerFilter_12d51b7c393.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.multipart.MultipartDecoderFilter.service(MultipartDecoderFilter.java:52) $ServletRequestServicerFilter_12d51b7c391.service($ServletRequestServicerFilter_12d51b7c391.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.services.impl.SetupRequestEncoding.service(SetupRequestEncoding.java:53) $ServletRequestServicerFilter_12d51b7c395.service($ServletRequestServicerFilter_12d51b7c395.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) $ServletRequestServicer_12d51b7c305.service($ServletRequestServicer_12d51b7c305.java) org.apache.tapestry.ApplicationServlet.doService(ApplicationServlet.java:123) com.rim.bes.bas.web.common.BASApplicationServlet.doService(BASApplicationServlet.java:153) org.apache.tapestry.ApplicationServlet.doGet(ApplicationServlet.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.console.LoginDispatcher.processRequest(LoginDispatcher.java:146) com.rim.bes.bas.web.console.LoginDispatcher.doGet(LoginDispatcher.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.common.ResponseHeadersFilter.doFilter(ResponseHeadersFilter.java:85) com.rim.bes.bas.web.console.VSJSupportFilter.doFilter(VSJSupportFilter.java:228) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) root cause org.apache.hivemind.ApplicationRuntimeException: Missing classpath resource '/com/rim/bes/bas/web/adminconsole/pages/login/SystemError.page'. [context:/WEB-INF/webAdminConsole.application, line 25, column 37] org.apache.tapestry.error.ExceptionPresenterImpl.presentException(ExceptionPresenterImpl.java:64) com.rim.bes.bas.web.common.CommonExceptionPresenter.presentException(CommonExceptionPresenter.java:269) com.rim.bes.bas.web.common.CommonExceptionPresenter.presentException(CommonExceptionPresenter.java:113) $ExceptionPresenter_12d51b7c2cf.presentException($ExceptionPresenter_12d51b7c2cf.java) org.apache.tapestry.engine.AbstractEngine.activateExceptionPage(AbstractEngine.java:121) org.apache.tapestry.engine.AbstractEngine.service(AbstractEngine.java:280) org.apache.tapestry.services.impl.InvokeEngineTerminator.service(InvokeEngineTerminator.java:60) $WebRequestServicer_12d51b7c3b5.service($WebRequestServicer_12d51b7c3b5.java) com.rim.bes.bas.web.console.ObjectCacheServiceFilter.service(ObjectCacheServiceFilter.java:72) $WebRequestServicerFilter_12d51b7c3b9.service($WebRequestServicerFilter_12d51b7c3b9.java) $WebRequestServicer_12d51b7c3bb.service($WebRequestServicer_12d51b7c3bb.java) com.rim.bes.bas.web.common.ServiceFilter.service(ServiceFilter.java:84) $WebRequestServicerFilter_12d51b7c3b7.service($WebRequestServicerFilter_12d51b7c3b7.java) $WebRequestServicer_12d51b7c3bb.service($WebRequestServicer_12d51b7c3bb.java) $WebRequestServicer_12d51b7c3b1.service($WebRequestServicer_12d51b7c3b1.java) org.apache.tapestry.services.impl.WebRequestServicerPipelineBridge.service(WebRequestServicerPipelineBridge.java:56) $ServletRequestServicer_12d51b7c397.service($ServletRequestServicer_12d51b7c397.java) org.apache.tapestry.request.DecodedRequestInjector.service(DecodedRequestInjector.java:55) $ServletRequestServicerFilter_12d51b7c393.service($ServletRequestServicerFilter_12d51b7c393.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.multipart.MultipartDecoderFilter.service(MultipartDecoderFilter.java:52) $ServletRequestServicerFilter_12d51b7c391.service($ServletRequestServicerFilter_12d51b7c391.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.services.impl.SetupRequestEncoding.service(SetupRequestEncoding.java:53) $ServletRequestServicerFilter_12d51b7c395.service($ServletRequestServicerFilter_12d51b7c395.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) $ServletRequestServicer_12d51b7c305.service($ServletRequestServicer_12d51b7c305.java) org.apache.tapestry.ApplicationServlet.doService(ApplicationServlet.java:123) com.rim.bes.bas.web.common.BASApplicationServlet.doService(BASApplicationServlet.java:153) org.apache.tapestry.ApplicationServlet.doGet(ApplicationServlet.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.console.LoginDispatcher.processRequest(LoginDispatcher.java:146) com.rim.bes.bas.web.console.LoginDispatcher.doGet(LoginDispatcher.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.common.ResponseHeadersFilter.doFilter(ResponseHeadersFilter.java:85) com.rim.bes.bas.web.console.VSJSupportFilter.doFilter(VSJSupportFilter.java:228) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) root cause org.apache.hivemind.ApplicationRuntimeException: Missing classpath resource '/com/rim/bes/bas/web/adminconsole/pages/login/SystemError.page'. [context:/WEB-INF/webAdminConsole.application, line 25, column 37] org.apache.tapestry.asset.ClasspathAssetFactory.createAbsoluteAsset(ClasspathAssetFactory.java:61) $AssetFactory_12d51b7c400.createAbsoluteAsset($AssetFactory_12d51b7c400.java) org.apache.tapestry.asset.ContextAssetFactory.createAsset(ContextAssetFactory.java:66) $AssetFactory_12d51b7c3fe.createAsset($AssetFactory_12d51b7c3fe.java) $AssetFactory_12d51b7c404.createAsset($AssetFactory_12d51b7c404.java) $AssetFactory_12d51b7c2ff.createAsset($AssetFactory_12d51b7c2ff.java) org.apache.tapestry.asset.AssetSourceImpl.findAsset(AssetSourceImpl.java:64) $AssetSource_12d51b7c3fa.findAsset($AssetSource_12d51b7c3fa.java) org.apache.tapestry.services.impl.NamespaceResourcesImpl.findSpecificationResource(NamespaceResourcesImpl.java:61) org.apache.tapestry.services.impl.NamespaceResourcesImpl.getPageSpecification(NamespaceResourcesImpl.java:71) org.apache.tapestry.engine.Namespace.locatePageSpecification(Namespace.java:264) org.apache.tapestry.engine.Namespace.getPageSpecification(Namespace.java:172) org.apache.tapestry.resolver.PageSpecificationResolverImpl.resolve(PageSpecificationResolverImpl.java:131) $PageSpecificationResolver_12d51b7c3f4.resolve($PageSpecificationResolver_12d51b7c3f4.java) $PageSpecificationResolver_12d51b7c3f5.resolve($PageSpecificationResolver_12d51b7c3f5.java) org.apache.tapestry.pageload.PageSource.getPage(PageSource.java:115) $IPageSource_12d51b7c2e5.getPage($IPageSource_12d51b7c2e5.java) org.apache.tapestry.engine.RequestCycle.loadPage(RequestCycle.java:268) org.apache.tapestry.engine.RequestCycle.getPage(RequestCycle.java:251) org.apache.tapestry.error.ExceptionPresenterImpl.presentException(ExceptionPresenterImpl.java:40) com.rim.bes.bas.web.common.CommonExceptionPresenter.presentException(CommonExceptionPresenter.java:269) com.rim.bes.bas.web.common.CommonExceptionPresenter.presentException(CommonExceptionPresenter.java:113) $ExceptionPresenter_12d51b7c2cf.presentException($ExceptionPresenter_12d51b7c2cf.java) org.apache.tapestry.engine.AbstractEngine.activateExceptionPage(AbstractEngine.java:121) org.apache.tapestry.engine.AbstractEngine.service(AbstractEngine.java:280) org.apache.tapestry.services.impl.InvokeEngineTerminator.service(InvokeEngineTerminator.java:60) $WebRequestServicer_12d51b7c3b5.service($WebRequestServicer_12d51b7c3b5.java) com.rim.bes.bas.web.console.ObjectCacheServiceFilter.service(ObjectCacheServiceFilter.java:72) $WebRequestServicerFilter_12d51b7c3b9.service($WebRequestServicerFilter_12d51b7c3b9.java) $WebRequestServicer_12d51b7c3bb.service($WebRequestServicer_12d51b7c3bb.java) com.rim.bes.bas.web.common.ServiceFilter.service(ServiceFilter.java:84) $WebRequestServicerFilter_12d51b7c3b7.service($WebRequestServicerFilter_12d51b7c3b7.java) $WebRequestServicer_12d51b7c3bb.service($WebRequestServicer_12d51b7c3bb.java) $WebRequestServicer_12d51b7c3b1.service($WebRequestServicer_12d51b7c3b1.java) org.apache.tapestry.services.impl.WebRequestServicerPipelineBridge.service(WebRequestServicerPipelineBridge.java:56) $ServletRequestServicer_12d51b7c397.service($ServletRequestServicer_12d51b7c397.java) org.apache.tapestry.request.DecodedRequestInjector.service(DecodedRequestInjector.java:55) $ServletRequestServicerFilter_12d51b7c393.service($ServletRequestServicerFilter_12d51b7c393.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.multipart.MultipartDecoderFilter.service(MultipartDecoderFilter.java:52) $ServletRequestServicerFilter_12d51b7c391.service($ServletRequestServicerFilter_12d51b7c391.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) org.apache.tapestry.services.impl.SetupRequestEncoding.service(SetupRequestEncoding.java:53) $ServletRequestServicerFilter_12d51b7c395.service($ServletRequestServicerFilter_12d51b7c395.java) $ServletRequestServicer_12d51b7c399.service($ServletRequestServicer_12d51b7c399.java) $ServletRequestServicer_12d51b7c305.service($ServletRequestServicer_12d51b7c305.java) org.apache.tapestry.ApplicationServlet.doService(ApplicationServlet.java:123) com.rim.bes.bas.web.common.BASApplicationServlet.doService(BASApplicationServlet.java:153) org.apache.tapestry.ApplicationServlet.doGet(ApplicationServlet.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.console.LoginDispatcher.processRequest(LoginDispatcher.java:146) com.rim.bes.bas.web.console.LoginDispatcher.doGet(LoginDispatcher.java:79) javax.servlet.http.HttpServlet.service(HttpServlet.java:617) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) com.rim.bes.bas.web.common.ResponseHeadersFilter.doFilter(ResponseHeadersFilter.java:85) com.rim.bes.bas.web.console.VSJSupportFilter.doFilter(VSJSupportFilter.java:228) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) Can you help me? Thank you! same question on bbforums

    Read the article

  • Enabling OUD Entry Cache for large static groups

    - by Sylvain Duloutre
    Oracle Unified Directory can take advantage of several caches to improve performances. especially the so-called database cache and the file system cache. In addition to that, it is possible to use an entry cache to cache LDAP entries. By default, the entry cache is not used. In specific deployements involving large static groups, it may worth loading the group entries to the entry cache to speed up group membership and group-based aci evaluation. To do so, run the following commands: First, specify which entries should reside in the entry cache. In the commad below, only entries matching the LDAP filter " (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) " will be stored in the entry cache. dsconfig set-entry-cache-prop \          --cache-name FIFO \          --add include-filter:\(\|\(objctclass=groupOfNames\)\(objectclass=groupOfUniqueNames\)\)          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt Then enable the entry cache: dsconfig set-entry-cache-prop \          --cache-name FIFO \          --set enabled:true \          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt In addition to that, you can control how much memory the entry cache can use: oud@s96sec1d0-v3:/application/oud : dsconfig -X -n -p <ADMIN PORT> -D "cn=Directory Manager" -w <password> get-entry-cache-prop --cache-name FIFO Property           : Value(s) -------------------:----------------------------------------------------------- cache-level        : 1 enabled            : true exclude-filter     : - include-filter     : (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) max-entries        : 2147483647 max-memory-percent : 90 You can change the max-entries amd max-memory-percent properties to control the entry cache size using the dsconfig set-entry-cache-prop command.

    Read the article

  • Silverlight Cream for January 30, 2011 - 2 -- #1038

    - by Dave Campbell
    In this Issue: Max Paulousky, Renuka Prasad, Ollie Riches, Jesse Liberty(-2-, -3-, -4-, -5-), Medusa M, John Papa, Beth Massi, and Joost van Schaik. Above the Fold: Silverlight: "Stop What You Are Doing And Learn About Reactive Programming" Jesse Liberty WP7: "Windows Phone Looping Selector for Digits " Max Paulousky Lightswitch: "How To Send HTML Email from a LightSwitch Application" Beth Massi Shoutouts: Shawn Wildermuch has niether GooNews for users of his cool WP7 app or or for the WP7 Marketplace in general: R.I.P. GooNews From SilverlightCream.com: Windows Phone Looping Selector for Digits Max Paulousky expanded on the Looping selector for some customization allowing him to display width/height metric measurement selectors... great job, Max! WP7 – How to Create a Simple Checked Listbox In Windows Phone 7 Renuka Prasad has the code for a nicely-working checked Listbox for WP7 on his blog... the post is the code... WP7Contrib: Network Connectivity Push Model Ollie Riches had a post last week that I'm just catching up to... about the 'push model' for network connectivity they produced in WP7 Contrib. Using the Camera in Windows Phone 7 Jesse Liberty has a bunch of posts up... I'm just going to bite the bullet and catch up! ... this 'From Scratch post 24 is all about the camera in your WP7 dev travails... and he makes it look so darned easy :) Linq and Fluent Programming Jesse Liberty's next post is 'From Scratch 25 and is all about Linq and Fluent Programming which started with a discussion at Codemash with Bill Wagner... wanna get a handle on fluent programming? ... check this out. Stop What You Are Doing And Learn About Reactive Programming Another item you might want to get your head around is Reactive Programming, or Rx... Jesse Liberty has a great post up discussing this, as his 'From Scratch post 26... good external links, and lots of commentary as well. Rx–Reactive Programming for Windows Phone Jesse Liberty's 'From Scratch 27 follows the previous on about Rx by taking the Rx show to the WP7 development arena. Want a solid Rx example... here ya go! Reactive Extensions–Observable Sequences are First Class Objects Finally catching up with Jesse Liberty (for now), I find this 'From Scratch number 28 which is again on Rx and WP7 dev, expanding on the example from the previous post by harnessing the power of Rx Localizing Silverlight applications Medusa M has a nice post up at dotnetslackers on localization in Silverlight. If you haven't had to do localization before, it can get to be a pain... understanding an article like this will get you part of the way to being pain-free. Silverlight TV 59: What Goes Into Baking Silverlight? Very cool presentation for those of you interested in the bits ... John Papa's Silverlight TV number 59 is up and he's chatting with Andy Rivas about the process followed getting the bits to us. How To Send HTML Email from a LightSwitch Application Beth Massi's latest Lightswitch post is on sending HTML Email via SMTP from Lightswitch, and then follows that up with sending Email via Outlook automation. ViewModel driven animations using the Visual State Manager, DataStateBehavior and Expression Blend After some good user feedback, Joost van Schaik decided to make some modifications to his WP7 app, and got involved in a Page Title collapse animation driven from the ViewModel. Check out the nice write-up, video, external links, and source... all good! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >