Search Results

Search found 5830 results on 234 pages for 'nuclear power plant'.

Page 36/234 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Pc sometimes turns on sometimes not

    - by cprogcr
    Some time ago, the PC gave the same problem. It wouldn't turn on. When i pressed the button, it turned on but showed nothing. I had replaced the CPU and that seemed to work. I didn't use the PC that much, rarely you know. But now, after some time, it gives the same problem. It turns on, the front light is on, it makes the normal noise the pc makes when it's turned on , but if I try to shut it down by holding the power button it just doesn't work. So again, I tried replacing the CPU and it worked again. I kept it all day working, just to be sure, and sometimes I would restart it and it would work again. No problems at all. So I turned it off at night, and next morning it just would make the same problem. So I tried replacing the PSU. And it worked again. Now while I had the PC with the new PSU, i tried to insert the old CPU, and again, it would turn on. The same thing, tried restarting too, and it would work. But this morning the same problem happened. Edit: I also tried another CPU today and yet no signs of working. I don't know now what to think.

    Read the article

  • Computer will freeze/ lock up after doing relatively stressful things

    - by GrowingCode247
    I'll first start off by saying that the issue GENERALLY doesn't occur unless I'm doing something remotely stressful for my computer. This issue used to occur whenever it felt it was necessary, however has not occurred completely randomly for a while now (thankfully) My computer's specs: CPU: AMD Phenom II X4 960T GPU: GeForce GTX 760 Memory: 16 GB RAM Resolution Used: 1680x1050, 59Hz (strange number for refresh rate?) res is highest for monitor Nvidia Driver version: 331.65 OS: Microsoft Windows 7 Ultimate (64-bit) Sometimes I will be able to go 2-3 games (about an hour, depending) and sometimes it will go maybe one game (20-30 minutes) and then my computer will run sluggishly and leave me unable to do much of anything. I can sometimes interact with programs at a very basic level (maximizing, minimizing), and I usually cannot close them in any way, not even through Task Manager. The highest temperature my GPU reaches is 76C, with the average being around 73C. During the time the temperatures are around 73C, my GPU's RAM usage is anywhere between 1250-1300 (out of 2GB). My CPU's temperature never goes over 60C, thankfully. The PSU should be fine. It's very mildly dusty but I feel as though that would not be causing this problem... I will clean it out as soon as everything else has been ruled out. Honestly I have no clue how to test the PSU for problems - same goes for my Motherboard. I cannot really think of what could be causing these freezes otherwise. Event Viewer details: EventID: 1 - VDS Basic Provider (I've no clue what this is) EventID: 3 - Kernel-EventTracing (Again, lost) EventID: 8003 - bowser (this seems fishy) and the one critical that I know others have been dealing with as I've browsed some other responses on the web: EventID: 41 - Kernel-Power any help to solve this problem would be GREATLY appreciated.

    Read the article

  • Smart Phones Shockingly Energy Efficient; Lead to Decreased Household Power Consumption

    - by Jason Fitzpatrick
    Given how often our smart phones and tablets spend plugged in and topping off their battery reserves, it’s easy to assume they’re sucking down a lot of power. Analysis shows the lilliputian but powerful devices are surprisingly efficient and may be decreasing our overall power consumption. Courtesy of energy-centric blog Outlier, we’re treated to a look at the power sipping habits of popular smart phones and mobile devices. The simple take away? They use shockingly little electricity over the course of the year–you can charge your new iPhone for a year of regular usage for under a buck. The more complex analysis? The proliferation of tiny and energy efficient devices is displacing heavier energy consumers (large televisions, desktop computers, etc.) and driving a more efficient gadget-to-consumption ratio is many households. Hit up the link below to read the full post. How Much Does It Take to Charge an iPhone [via Mashable] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • WM_POWERBROADCAST handler for CMainDlg in ATL app not invoked

    - by psychotik
    I have an ATL app where I want to handle WM_POWERBROADCAST. I have a CMainDlg (CAxDialogImpl) in whose MSG_MAP I defined the handler. BEGIN_MSG_MAP(CMainDlg) ... MESSAGE_HANDLER(WM_POWERBROADCAST, OnPowerChange) ... END_MSG_MAP() However, the handler isn't invoked when I do things that should invoke it, for instance change power settings or put the machine to sleep. Any ideas about what might be going on, and how to fix this? Does CMainDlg not get notified of power events, for some reason?

    Read the article

  • Calling via adb in Power shell

    - by Imran Nasir
    As you may know, the command for calling via adb is: .\adb.exe shell am start -a android.intent.action.CALL tel:"656565" This works well but when I use textbox, it takes garbage value... .\adb.exe shell am start -a android.intent.action.CALL tel:$textbox1.Text I have tried this also but failed $button21_Click={ #TODO: Place custom script here $textbox1.Clear .\adb.exe shell am start -a android.intent.action.CALL tel:$textbox1.Text } Please help

    Read the article

  • Archlinux auto-start after I shutdown my computer

    - by madper
    every one. I'm in a big trouble. My computer (HP ProBook 4230s) has two OS----Archlinux and Win 7. When I use Archlinux, after halt my computer, it will start up after a while without press power. And there is an other thing. My computer's clock will be wrong. Many times I change it in bios, but it wrong again. If I turn off the computer from Win 7, it will never start up untill pressing power bottom. And the clock will be right. I also used ubuntu\debian\mageia, and both of them are fine with my notebook. Is there some configure is wrong with my ArchLinux?

    Read the article

  • Deployment Problem after using DataRepeater of MS Visual Bacis power pack

    - by Mohsan
    hi. Microsoft Visual Studio 2008 Service pack 1 comes with Visual Basic Powerpacks which has the DataRepeater control. I used this control in my c# winform application. in my system everything is running fine. now i copied the debug folder to other system which has only .Net Framework 3.5 SP1 installed. in this system is giving me error cannot load dependency Microsoft.VisualBasic.PowerPacks.dll even i set the Copy Local to "true" for "Microsoft.VisualBasic.dll" and "Microsoft.VisualBasic.PowerPacks.Vs.dll" please tell me how to solve this problem

    Read the article

  • C# Winform : Deployment Problem after using DataRepeater of MS Visual Basics power pack

    - by Mohsan
    hi. Microsoft Visual Studio 2008 Service pack 1 comes with Visual Basic Powerpacks which has the DataRepeater control. I used this control in my c# winform application. in my system everything is running fine. now i copied the debug folder to other system which has only .Net Framework 3.5 SP1 installed. in this system is giving me error cannot load dependency Microsoft.VisualBasic.PowerPacks.dll even i set the Copy Local to "true" for "Microsoft.VisualBasic.dll" and "Microsoft.VisualBasic.PowerPacks.Vs.dll" please tell me how to solve this problem

    Read the article

  • C# Winform : Deployment Problem after using DataRepeater of MS Visual Bacis power pack

    - by Mohsan
    hi. Microsoft Visual Studio 2008 Service pack 1 comes with Visual Basic Powerpacks which has the DataRepeater control. I used this control in my c# winform application. in my system everything is running fine. now i copied the debug folder to other system which has only .Net Framework 3.5 SP1 installed. in this system is giving me error cannot load dependency Microsoft.VisualBasic.PowerPacks.dll even i set the Copy Local to "true" for "Microsoft.VisualBasic.dll" and "Microsoft.VisualBasic.PowerPacks.Vs.dll" please tell me how to solve this problem

    Read the article

  • error handeling in informatca power center

    - by user223541
    i want to devlop a mapping for followinfg scenerio . I have a 1 source and 1 target and 1 error table.Target and Error tables have all fields that are present in source tables.But the data type o of all fieds for error table are varchar .Error table dont have integirty or foreign key and other constraints . Error table also have2 more fileds .Error no and error msg. Now when the workflow is executed if there is erro while inserting any record then that recored shold be moved to error table.Also the data base error code and error message should be logged in error no and error message in error tables fields as mentioned. How can i devlop such a mappng?Where can i find exaples of such mapping ?

    Read the article

  • Using different SSDs types (not only SATA based) as system drive

    - by Hubert Kario
    Currently I have a Thinkpad X61s and want to make it both a bit faster and a bit more power efficient. For that reason I thought that adding SSD drive would make most sense. Unfortunately, because of financial reasons, buying SSD of over 200GB capacity is out of reach for me (not only it would be worth more than the rest of the laptop, but also I currently have a 500GB drive in it, so even such a drive would be kind of a downgrade for me). During preliminary testing with a cheap Transcend 4GB Class 6 (14MiB/s streaming, 9MiB/s random read) card I experienced boot times to be reduced by half so putting the OS only on it would already would be an improvement. Unfortunately, my system now is about 11GiB in size so anything less than 16GB would be constraining. In this laptop I can connect additional drives on at least 5 different ways: using SATA-ATA converter caddy in the X6 Ultrabase using internal mini PCIe slot using integrated SDHC slot using CardBus (a.k.a PCMCIA or PC Card) slot using USB Thankfully, because I use only Linux on this PC the bootability of them is irrelevant as I can put the /boot partition on internal HDD and / on any of the above mentioned Flash memories (as I already did for the SDHC test). From what I was able to research and from my own experience those options come with rather big downsides or other problems: SATA-ATA caddy It has three downsides: I have to carry the Ultrabse with me at all times (it's not really inconvenient, but those grams do add) and couldn't disconnect it when I want to disconnect the battery It makes the bay unusable for the optical drive and occasional quick access to other hard drives the only caddies I could buy have rather flaky controllers in them so putting my OS on it would hamper its stability Internal mini PCIe slot This would be an ideal solution, if only I could find real PCIe SSDs, not only devices that could talk only SATA or ATA over PCIe mechanical connection (the ones used in Dell Mini or Asus EEE). Theoretically Samsung did release such devices but I couldn't find them in retail anywhere. Integrated SDHC slot It's a nice solution with a single drawback: the fastest 16GB SDHC card on the market can only do around 35MiB/s read and 15MiB/s write while still costing like a normal 40GB SATA SSD that's 10 times faster. Not really cost-effective. CardBus (a.k.a PCMCIA or PC Card) slot Those cards are much faster than the SDHC option (there are ones that can do well over 50MiB/s read in benchmarks) and from what I could find the PCMCIA controller in my laptop does support UDMA so it should be able to deliver comparable speeds. They still cost similarly to SD cards but at least they provide streaming performance comparable to my current HDD. USB That's the worst option. Not only is it limited to 20-30MiB/s by the interface itself the drive would stick out of the laptop so it's a big no no. The question As such I think that going the "CF in a CardBus adapter" route will be the best option. My question is: did anyone try using CF cards in CardBus adapters as system drives with Linux on Thinkpad laptops? Laptops in general? What was the real-world performance? I don't have any CF cards so I can't check how well does it work with suspend/resume, or whatever it's easy to make it work in initramfs (I'm using ArchLinux and SD card was trivial — add 3 modules in single config line and rebuilding initramfs) so any tips/gotchas on this are welcome as well.

    Read the article

  • power function in blackberry

    - by Rahul Varma
    Hi, I desperately need a solution for this... I m using Blackberry JDE 5.0. In documentation it shows net.rim.device.api.util.MathUtilities.pow ( double double ) is added form 4.6. But i couldnt get pow function when i use Math.pow(). I need to get this value...float fSecondFactor=(float) (Math.pow(1+fRatePerMonth,fNumberofMonths)-1); Can anyone tell me how to achieve this...Plzz....

    Read the article

  • Facebook Hacker Cup: Power Overwhelming

    - by marcog
    A lot of people at Facebook like to play Starcraft II™. Some of them have made a custom game using the Starcraft II™ map editor. In this game, you play as the noble Protoss defending your adopted homeworld of Shakuras from a massive Zerg army. You must do as much damage to the Zerg as possible before getting overwhelmed. You can only build two types of units, shield generators and warriors. Shield generators do no damage, but your army survives for one second per shield generator that you build. Warriors do one damage every second. Your army is instantly overrun after your shield generators expire. How many shield generators and how many warriors should you build to inflict the maximum amount of damage on the Zerg before your army is overrun? Because the Protoss value bravery, if there is more than one solution you should return the one that uses the most warriors. Constraints 1 = G (cost for one shield generator) = 100 1 = W (cost for one warrior) = 100 G + W = M (available funds) = 1000000000000 (1012)

    Read the article

  • Whats the most common waste of computing power in javascipt

    - by qwertymk
    We've all seen people who do this jQuery('a').each(function(){ jQuery(this)[0].innerHTML += ' proccessed'; }); function letsPoluteNS() { polute = ''; for (morePolution = 0; morePolution < arguments.length; morePolution++) polute.join(arguments[morePolution]); return polute; } and so on. I was wondering what people have seen the most common javascript/jQuery technique that is slowing down the page and/or wasting time for the javascript engine. PS I know that this question may not seem to fit into whats an accepted question, yet I'm asking for what the most common accepted waste is

    Read the article

  • What power do I have over my license?

    - by DavidG
    Say for example, I've written some code under GPL 3. My company wants to use that code for a commercial product. Am I allowed to then say to them that they can use it under LGPL/MIT or any other license? If so, would I then have to change the included header at the top of each file? If so, what is stopping someone else from changing the license on my code?

    Read the article

  • Step by Step / Deep explain: The Power of (Co)Yoneda (preferably in scala) through Coroutines

    - by Mzk
    some background code /** FunctorStr: ? F[-]. (? A B. (A -> B) -> F[A] -> F[B]) */ trait FunctorStr[F[_]] { self => def map[A, B](f: A => B): F[A] => F[B] } trait Yoneda[F[_], A] { yo => def apply[B](f: A => B): F[B] def run: F[A] = yo(x => x) def map[B](f: A => B): Yoneda[F, B] = new Yoneda[F, B] { def apply[X](g: B => X) = yo(f andThen g) } } object Yoneda { implicit def yonedafunctor[F[_]]: FunctorStr[({ type l[x] = Yoneda[F, x] })#l] = new FunctorStr[({ type l[x] = Yoneda[F, x] })#l] { def map[A, B](f: A => B): Yoneda[F, A] => Yoneda[F, B] = _ map f } def apply[F[_]: FunctorStr, X](x: F[X]): Yoneda[F, X] = new Yoneda[F, X] { def apply[Y](f: X => Y) = Functor[F].map(f) apply x } } trait Coyoneda[F[_], A] { co => type I def fi: F[I] def k: I => A final def map[B](f: A => B): Coyoneda.Aux[F, B, I] = Coyoneda(fi)(f compose k) } object Coyoneda { type Aux[F[_], A, B] = Coyoneda[F, A] { type I = B } def apply[F[_], B, A](x: F[B])(f: B => A): Aux[F, A, B] = new Coyoneda[F, A] { type I = B val fi = x val k = f } implicit def coyonedaFunctor[F[_]]: FunctorStr[({ type l[x] = Coyoneda[F, x] })#l] = new CoyonedaFunctor[F] {} trait CoyonedaFunctor[F[_]] extends FunctorStr[({type l[x] = Coyoneda[F, x]})#l] { override def map[A, B](f: A => B): Coyoneda[F, A] => Coyoneda[F, B] = x => apply(x.fi)(f compose x.k) } def liftCoyoneda[T[_], A](x: T[A]): Coyoneda[T, A] = apply(x)(a => a) } Now I thought I understood yoneda and coyoneda a bit just from the types – i.e. that they quantify / abstract over map fixed in some type constructor F and some type a, to any type B returning F[B] or (Co)Yoneda[F, B]. Thus providing map fusion for free (? is this kind of like a cut rule for map ?). But I see that Coyoneda is a functor for any type constructor F regardless of F being a Functor, and that I don't fully grasp. Now I'm in a situation where I'm trying to define a Coroutine type, (I'm looking at https://www.fpcomplete.com/school/to-infinity-and-beyond/pick-of-the-week/coroutines-for-streaming/part-2-coroutines for the types to get started with) case class Coroutine[S[_], M[_], R](resume: M[CoroutineState[S, M, R]]) sealed trait CoroutineState[S[_], M[_], R] object CoroutineState { case class Run[S[_], M[_], R](x: S[Coroutine[S, M, R]]) extends CoroutineState[S, M, R] case class Done[R](x: R) extends CoroutineState[Nothing, Nothing, R] class CoroutineStateFunctor[S[_], M[_]](F: FunctorStr[S]) extends FunctorStr[({ type l[x] = CoroutineState[S, M, x]})#l] { override def map[A, B](f : A => B) : CoroutineState[S, M, A] => CoroutineState[S, M, B] = { ??? } } } and I think that if I understood Coyoneda better I could leverage it to make S & M type constructors functors way easy, plus I see Coyoneda potentially playing a role in defining recursion schemes as the functor requirement is pervasive. So how could I use coyoneda to make type constructors functors like for example coroutine state? or something like a Pause functor ?

    Read the article

  • Article about code density as a measure of programming language power

    - by prosseek
    I remember reading an article saying something like "The number of bugs introduced doesn't vary much with different programming languages, but it depends pretty much on SLOC (source lines of code). So, using the programming language that can implement the same functions with smaller SLOC is preferable in terms of stability." The author wanted to stress the advantages of using Functional Programming, as normally one can program with a smaller number of LOC. I remember the author cited a research paper about the irrelevance of choice of programming language and the number of bugs. Is there anyone who knows the research paper or the article?

    Read the article

  • SQL Server CONTAINS with digits gives no results

    - by dale
    Hi, I have a database table which is full-text indexed and i use the CONTAINS-function to perform a search-query on it. When I do: SELECT * FROM Plants WHERE CONTAINS(Plants.Description, '"Plant*" AND "one*"'); I get back all correct results matching a description with the words "Plant" and "one". Some plant are named like "Plant 1", "Plant 2" etc. and this is the problem. When i do this, i get no results: SELECT * FROM Plants WHERE CONTAINS(Plants.Description, '"Plant*" AND "1*"'); Anyone know why?

    Read the article

  • Why PC reboots when there’s a power failure even with UPS?

    - by Jamil
    I've purchased a Line Interactive UPS 1200VA. It's supposed to give 8~20min backup (as written in the manual). This UPS has transfer time < 10ms. It works fine when the mains is active. But the problem is that when the power went off, the PC also went off for a fraction of a second and started rebooting. The strangest thing though is that it has to be a proper power failure by the service supplier. If I just turn off the power at the wall plug, the UPS kicks in immediately and the PC carries on working fine. What's the solution of that? What should I do? My hard drive was physically damaged because of improper shut down & restart. I've 5~8 times power outage in my country so I badly need an UPS.

    Read the article

  • UPS: Do i require a special extension cord for power in?

    - by rism
    I have a couple of Tripplite UPS systems. The power in cables are bright orange and about 2 meters in length. I want to put the system on the other side of the room but for some reason the UPS keep "going off" over there. So I guess the wall power sockets on that side of the room are a little dodgy. So i figured Id just go online and get some replacement UPS power IN (from wall to UPS) cables of an appropriate length. But i cant find any anywhere. (auction sites, tripplite store, cable websites). So now I'm wondering if that's just because you can use a standard extension cord of an appropriate wattage? I thought the UPS power IN cables were "special". Is that not so?

    Read the article

  • VMware Workstation "Power off" and "Suspend" buttons are disabled. What is going on?

    - by Ed Norris
    I've been using an XP image for a few months now with no problems. Recently the power off and resume buttons were disabled and I'm not sure what happened to cause that. In addition, the menu items to do those functions are grayed out (like VM | Power | Power Off) I'm using VMware Workstation 6.5.3 on a Windows 7 64-bit host. The image is Windows XP 32-bit. There is plenty of free space and memory on the host and the CPU is not pegged. I am able to power off the image through its Start menu, but that's a workaround not a fix. Any suggestions? TIA EDIT: Well after manually shutting down the image then closing and reopening the image file (which I've done before) in preparation for reinstalling the tools as suggested below, it looks fine. The power off and suspend buttons are enabled and work. So what do I do with this question now? "Close and restart a few times and it may work" doesn't seem useful...

    Read the article

  • Can a motherboard be faulty even if it's getting power and so are components hooked up to it?

    - by Davy8
    Sort of a followup to this question. The mobo's getting power, the lights are on. The GPU fan is spinning (it doesn't use auxiliary power, it's only connected to the mobo). I'm not getting any video signal, and it's not the video card (nor monitor) that's faulty, so I'm suspecting mobo or CPU (possibly RAM?) and I'm trying to pinpoint which part is at fault. Is the motherboard a candidate for being broken or is it not very likely if it's getting power and powering other components? The CPU fan is getting power as well.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >