Search Results

Search found 44026 results on 1762 pages for 'raid question'.

Page 36/1762 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• HDD situation - what would be best - data and backup

  - by Sam Johnson

  I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• Reshape linux md raid5 that is already being reshaped?

  - by smammy

  I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The entry in /proc/mdstat looks like this: md0 : active raid5 sdf1[2] sda1[0] sdb1[1] 976759936 blocks super 0.91 level 5, 64k chunk, algorithm 2 [3/3] [UUU] [>....................] reshape = 1.8% (18162944/976759936) finish=834.3min speed=19132K/sec Now I'd like to do this: mdadm /dev/md0 --add /dev/sdd1 mdadm --grow /dev/md0 --raid-devices=4 --backup-file=/root/md8_n4.bak Is this safe, or do I have to wait for the first reshape operation to complete? P.S.: I know I should have added both disks first, and then reshaped from 2 to 4 devices, but it's a little late for that.

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

  - by Litzner

  I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Completely replacing (upgrading) a RAID 5 array of disks on an ESXi server

  - by jshin47

  I have a development server that runs several VM on ESXi 5. It has an array of disks in the RAID 5 configuration where all of the disks are currently the same size. I would like to expand storage on this box greatly, but I am not sure what the smartest way to go about this would be. My current plan is to: Turn off all VM Copy VM folders from server to another location Verify that I can mount all the VM on the new location (ie that the copy went ok) Replace all the disks with new, bigger ones Reinstall ESXi5 Copy the VM back over This seems like it might take a while to accomplish and is not terribly slick, especially since I will have to reconfigure ESXi 5, but is there a smarter alternative?

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

• Detaching EBS Volumes (in LVM) take a lot of time

  - by Cheezo

  I have an EC2 Instance(EBS Backed-root partition) with EBS volumes configured via LVM. I have formatted it as ext4 and can mount it to store data etc. Now i want take a snapshot of the root partition, hence in that case i go and detach the other non-root EBS volumes (configured in LVM). Here a regular detach does not work, and i have "force" detach almost always. Although, i another similar setup with RAID instead of LVM and there after stopping RAID, i can easily detach. The whole setup is running Ubuntu Maverick 10.10 Please assist me in the same.

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• cant recognize the path of hard drive which is not a part of an array

  - by Abhishek

  hi there, I have a problem on my server as below.. On my server i configured a raid array of 3 hard disks, in my c drive their is a web applications running on Apache Tomcat server. Now because of shortage of storage i entered a new hard disk to the server which is not a part of that raid array. Now through my web application i upload some images to new hard drive and file uploaded successfully but when through that same application, i try to retrieve those images and show on a web site i does not recognize that and dose not give any error. i try to access that drive with absolute path but it not works. Can any one help me to find the solution of this problem? Thank You in advance.

  Read the article

• Raid-3 like software backup tool

  - by Chronial

  I have a lot of data (about 7 TB), stored across multiple hard-drives with varying sizes. I would like to have a backup of that data to be safe against drive failure. A RAID is not a good option for me, as I want to keep my cost low and be able to easily extend the storage capacity of my setup by buying an additional HD. I remember seeing a piece of software that generates parity data over all drives and stores that on an extra drive. That solution protects the setup from hard drive failure and works with varying drive sizes (as long as the parity drive is the biggest one). But I can’t seem to find that software again. Does anybody now what I’m talking about or have any other solution for my situation?

  Read the article

• Force RAID to read exiled disk?

  - by user198847

  user user197015 asked on 1th of November the following question: "We have a RAID 6 array (Infortrend EonStor DS S16F) that recently had two disks fail. Immediately prior to replacing these two disks, a third, good, disk was accidentally ejected from the array. After reinserting this disk it is marked as "exiled" by the array's firmware, and so even after replacing the two failed disks with new ones the array refuses to rebuild the logical volume and remains inaccessible. Since the temporarily-ejected disk is still functional and nothing has been written to the array since it was ejected, it seems that it should theoretically be possible to recover all the data on the array, but how can we convince the array to use the data from the "exiled" disk? Thanks for any help or advice you can offer." Now I've got quite the same problem. The post has been deleted by the user, so I don#t know if he was successful. Is there anybody who can help me? Thank you!

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• Hot-swapping drives

  - by user57770

  I have hot swap drives and controllers, but have never actually used the hot swap capability. What is the procedure for doing so? Do I need to warn Linux that I'm about to pull a drive out? Should I do anything after I put a drive back in? Does it make a difference whether the drive is part of a RAID set? The drives are generally RAIDed, but not always. Any RAID sets are managed by Linux, rather than the controller. The machines are running Fedora and CentOS.

  Read the article

• mirroing hard drives of different sizes

  - by user30472

  I have a dell server with two 18 gig drives in a Raid 1 config. I want to replace the drives with 400 gig drives. If I break the mirror and then remove one of the 18g drives, insert a 400g and create the mirror, then do the same process again with the other 400g drive, what will I have? I would like to think I would have a new 400g raid 1 drive. But I seem to remember that this process might result in only 18g of useable space on the 400g drives. Anyone know for sure? Thank

  Read the article

• Software Developer Interview Question - Fair or Unfair

  - by user607018

  I just phone interviewed with a company for a graduate software developer position and was asked the following questions. I should add that the company concerned are not a database vendor. How does a query optimiser work? If a database was performing badly how would you use the performance logs to find out the problem. I have asked whether they ask such questions of all candidate software developers (graduate or experienced) in a first phone interview. They replied that they like to test their candidates knowledge of database development. I want to write to the company to say that these questions are unreasonable to ask at a software developer interview and to request that my interview be done over. I would like to check the reasonableness of the following assumptions a) Those questions cannot be fairly classified as database development questions. b) I think the questions are appropriate for a DBA interview but wholly unreasonable for a software developer interview (experienced or not). c) The first question is only relevant to a database vendor. d) The second question is not fair because software developers typically don't deal with database performance logs as that is the job of the DBA. Perhaps some of you will be kind enough to comment on my assumptions or may have any other suggestions, before I write to the company.

  Read the article

• Game Trees Conceptual Question

  - by Chris Corbin

  I am struggling to conceptually understand a question in a programming assignment for an algorithms class. The problem is dealing with a fictitious 2 player game, named Easy. The rules of the game are simple; each player may chose one of 4 integers {0-3} after which that integer is not available for the other player. The catch is, a player picks {0} it means they quit. The objective is for Player 1 to get {1} and Player 2 to get {2}, in which case they may win, however if both or neither succeed, then the game ends in a draw. I have been asked to draw the game tree for Easy, showing all nodes, which they explained as 4! = 24. Labeling the edges, which represent moves (selecting a number) and the leaves with who won (1 means Player 1 won, -1 means Player 2 won, and 0 means a tie). I have drawn out a game tree, which I believe is correct, however I am not 100% certain hence I am asking the question. My game tree only has 16 leaves. I am thinking that when a player picks {0}, and then quits, the game tree stops there? I don't see how it is possible to get to 24 leaves? Any help would be greatly appreciate, and if you need more information I would be happy to provide it. Thanks

  Read the article

• Algorithms or patterns for a linked question and answer cost calculator

  - by kmc

  I've been asked to build an online calculator in PHP (and the Laravel framework). It will take the answers to a series of questions to estimate the cost of a home extension. For example, a couple of questions may be: What is the lie of your property? Flat, slightly inclined, heavily inclined. (these suggestive values could have specific values in the underlying calculator like, 0 degrees, 5 degrees, 10 degrees. What is your current flooring system? Wooden, or concrete? These would then impact the results of other questions. Once the size of the extension has been input, the lie of the land will affect how much site works will cost, and how much rubbish collection will cost. The second question will impact the cost of the extensions flooring, as stumping and laying floorboards is a different cost to laying foundations and a concrete slab. It will also influence what heating and cooling systems are available in the calculator. So it's VERY interlinked. The answer to any question can influence the options of other questions, and the end result. I'm having trouble figuring out an approach to this that will allow new options and questions to be plugged in at a later stage without having things too coupled. The Observer pattern, or Laravel's events may be handy, but currently the sheer breadth of the calculator has me struggling to gather my thoughts and see a sensible implementation. Are there any patterns or OO approaches that may help? Thanks!

  Read the article

• Java game design question (graphical objects)

  - by vemalsar

  Hello Guys, I'm beginner in game development, in Java and here on this site too and I have a game design question. Please comment my idea: I have a main loop which call update and draw method. I want to use an ArrayList which store graphical objects, they have coordinate and image or text to draw and my game objects extends this class. In update, I can choose which objects should be put in the array and in draw method I'll display the elements of array on the screen. I'm using a buffer and draw first there, but it is not important now I guess...Here is a simple (not full) code, only the logic: public class GamePanel extends JPanel implements KeyListener { ArrayList<graphicalObjects> graphArray = new ArrayList<graphicalObjects>(); public void update() { //change the game scene, update the graphArray, process input etc. } public void draw() { //draws every element of graphArray to a JPanel } public static main(String[] args) { while(true) { update(); draw(); } } } My questions: Should have I use interface or abstract class for graphicalObjects? graphicalObjects class and the ArrayList really needs or there is some better solution? How to draw objects? They draw themself with their own method or in the draw method I have to draw manually based on graphicalObjects variables (x,y coordinates, image etc.)? If this conception is wrong, please suggest another one! All comments are welcome and sorry if this is dumb question, thanks!

  Read the article

• License compatibility question

  - by Ivaylo Slavov

  I have a question regarding software licenses. I plan to put a license to a framework that I have written. My intention is that the license should be open, in order to maintain a community. Also I want to control when a new version is released and which changes will be included. The license should allow the framework to be used with commercial products, therefore respecting their own license. I have done some quick research and I decided to double license my work under the Apache License 2.0 (ASL) and Eclipse Public License (EPL). My point is that the EPL will provide me the ability to control the release cycle as well as the contributions to the project and the Apache license will take care for any patents a 3rd party might want to use in a derived work. Also both are open licenses. My question is related to the GLP and LGPL licenses. If I have the above licenses to my framework, will it be possible and legal, for someone to create a derived work of my framework, that is also a derived work of, or links a library that is under the LGPL license? Thanks in advance. EDIT: To be clear I will explain how I expect things to work. The framework will define some common API for certain functionalities as well as a Wrapper class that will invoke an implementation of that API. The Wrapper will be part of the framework, but it will internally call the actual implementation. This implementation should be in a separate library, and such libraries I would like to be developed and maintained by community. Surely the community will have to access the framework but I want to limit changes to the framework by the community but I want to provide freedom for any API implementation (a derived work of the framework). The framework will enable flexible configuration mechanisms that will tell which implementation of an API will be used.

  Read the article

• Database design - table relationship question

  - by iama

  I am designing schema for a simple quiz application. It has 2 tables - "Question" and "Answer Choices". Question table has 'question ID', 'question text' and 'answer id' columns. "Answer Choices" table has 'question ID', 'answer ID' and 'answer text' columns. With this simple schema it is obvious that a question can have multiple answer choices & hence the need for the answer choices table. However, a question can have only one correct answer and hence the need for the 'answer ID' in the question table. However, this 'answer ID' column in the question table provides a illusion as though there can be multiple questions for a single answer which is not correct. The other alternative to eliminate this illusion is to have another table just for correct answer that will have just 2 columns namely the question ID and the answer ID with a 1-1 relationship between the two tables. However, I think this is redundant. Any recommendation on how best to design this thereby enforcing the rules that a question can have multiple answer choices but only one correct answer? Many Thanks.

  Read the article

• Oracle DBA Job Interview - Nailing a Fairly Common Question

  While not that technical in nature, this one question gives you an opportunity to list reasons or possibilities of a technical nature, which in turn allow you to demonstrate your knowledge and understanding of how Oracle Database works, and perhaps in this case, how it may not be working.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >