Search Results

Search found 1331 results on 54 pages for 'till b'.

Page 36/54 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• what port should I open for mysql master-master replication?

  - by Vanddel

  I have two servers running php5-fpm and a load balancer running nginx, the three servers share /var/www/drupal using nfs. nfs is working correctly. I replicated the two servers' database using mysql master master replication. everything was working fine till I added my iptables rules. In my iptables script, I first drop all chains then I accept the ones I want, other than that there are no other drop statements. I opened port 3306 for mysql replication like this : (the rule is on both servers ) iptables -A INPUT -p tcp -s $ip_Of_Other_Server --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d $ip_Of_Other_Server --sport 3306 -j ACCEPT The problem is, when I run both servers and I try to log in using my account on drupal it doesn't log in although I find a successful log in attempt in drupal logs. When I run only one server of them I can log in normally. when I allow everything in my iptables rules it works normally. I believe there's some port I need to open using iptables for the replication to work correctly but I can't find which one to open.

  Read the article

• IIS 7.5 Siteminder Does not protect ASP.net MVC requests

  - by HariM

  We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

  Read the article

• Windows Server 2003 with Apache and IIS causing random faulting and performance issues with Apache?

  - by contrebis

  I'm trying to fix a problem on a Windows Server 2003 SE install which is running IIS6 and Apache webserver (with PHP and MySQL). IIS sites are bound to one IP, Apache to the other. Everything seemed fine till the other IP address was installed to allow a webservice to run under IIS. Symptoms: Apache now responds very slowly, even requests for static files (often 30 seconds or more) Sporadic errors are appearing in the event logs like: Faulting application httpd.exe, version 2.2.14.0, faulting module php5ts.dll, version 5.2.13.13, fault address 0x000ac14f. I've double-checked the config files, taken account of this question/answer http://serverfault.com/questions/51230/running-iis-and-apache-on-the-same-windows-server, upped the Apache log level to debug, run TCPView to check for conflicting bindings, upgraded to latest Apache/PHP versions but still no success or indication of a cause. Any suggestions on where to look, or debugging tips would be gratefully received. I'm a web programmer so not so familiar with Windows Server admin or details of the networking stack. Running PHP under IIS is not an option and hosting on another server is non-ideal.

  Read the article

• USB keyboard stopped working in Ubuntu with error -71

  - by tapan

  I have a usb keyboard which was working perfectly till now (about a year since i have been regularly using ubuntu). It suddenly stopped working. It stopped working when I connected a USB HDD. Now the keyboard works randomly .. working for a while and then stops working for a longer time. Here is the dmesg output : [ 705.817076] usb 5-1: device not accepting address 8, error -71 [ 705.928032] usb 5-1: new low speed USB device using uhci_hcd and address 9 [ 706.336060] usb 5-1: device not accepting address 9, error -71 [ 706.448055] usb 5-1: new low speed USB device using uhci_hcd and address 10 [ 706.568044] usb 5-1: device descriptor read/64, error -71 [ 706.792049] usb 5-1: device descriptor read/64, error -71 [ 707.008060] usb 5-1: new low speed USB device using uhci_hcd and address 11 [ 707.128041] usb 5-1: device descriptor read/64, error -71 [ 707.352052] usb 5-1: device descriptor read/64, error -71 [ 707.456068] hub 5-0:1.0: unable to enumerate USB device on port 1 Based on the suggestions here i tried the following two things: echo -1 > /sys/module/usbcore/parameters/autosuspend echo Y > /sys/module/usbcore/parameters/old_scheme_first However, i am still facing the same problem. Can anyone help me out with this ? I'm using Ubuntu 10.04 Lucid Lynx.

  Read the article

• Why are snapshots considered as temporary backups not real backups?

  - by Samselvaprabu

  I am using VMware ESXi. In our team we use to provide snapshots for long term backup. Then we faced issues like memory spillover and the server got hang up. I started reading in VMware knowledgebase articles and everywhere. Everywhere it was recommended not to have snapshots for a long time. Even VMware advised to keep snapshots for maximum of three days. But our team kept asking us to have at least two permanent snapshots (till deleting the VM). Sometimes we may use the VM for a year). one snapshot is for fresh machine state. (So when we complete testing an application, we will revert back to fresh state and install another application) (If I did not allow that, I may often need to host the VM.) Next snapshot for keeping the VM in some state (maybe they would have found an issue and keep that state for some time. Or they may install prerequisites for the application and keep the machine ready for testing.) Logically, their needs seems to be fair. But if I allow that, I am to permit them to hold the snapshots for long time. We are not using our VM as a mail server or database server. Why is keeping snapshots for long time having an adverse effect? Why are snapshots considered as temporary backups, not real backups?

  Read the article

• Test whether svn REPO changes are reflected in Working Copy

  - by user492160

  Requirement Changes will be made to the REPO directory and this should get updated to wc(working copy) as opposed to the normal way of WC REPO. Senario: My svn repo- /var/www/svn/drupal My checkout-dir/working-copy- /var/www/html/drupalsite So I've done: edited post-commit hook to contain: "/usr/bin/svn update /var/www/html/drupalsite" I won't make any change to svn WC. I'll make changes to svn REPO- /var/www/svn/drupal. After changes are made to svn repo, run "svn commit /var/www/html/drupalsite". This will trigger the post-commit hook. This inturn will run "svn update /var/www/svn/drupal" and thus my WC will get updated with the changes of REPO. Query a. Would the above steps 1-3 help achieve my 'Requirement'? b. I'd need advise on how to test if the above setup works successfully or not. I'm at loss about the success of steps 1-3 the reason why query(a) is present. This is a bit more of a concern for me. NB: I'm new to subversion. Whatever I've configured till now have been done by reading articles online. Reason for query (b) is because I'm not into development. It seems to be a php drupal website and I happen to be setting it up. So I'm not aware as to how to make a "PROPER" change in REPO so that it gets reflected in WC. If reflected, my configs are right and the team can start on development. I manually put a random file/folder into REPO dir for seeing a change in WC and ran steps 1-3 but was of no avail and later on learned that it was NOT the way to make a change to a REPO. Pleas advise. Thanks

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• i7 overclocking problem

  - by benwebdev

  Hi everyone, I've got an overclocked system that seems to be misbehaving. When trying to boot up from cold the system just hangs and nothing is output to the screen. Fans are on as they should but nothing happens to finish the boot. From here I have to switch it off then on again and the boot completes. If I go into the tweak menu in the BIOS I'm informed that a boot has failed I've been in touch with Overclockers UK support a bit and theres not yet been a solution. We've mainly been tweaking the voltage for the CPU. Any suggestions? I'm new to Overclocking which is why I got a bundle with OCUK. With this issue happening on Cold Boot too its tricky to test as I have to make a change then wait till the next day. My system is here: Intel Core i7 930 2.80Ghz overclocked to 4GHz Gigabyte X58A-UD3R (BIOS Version: FC) 6GB RAM Power Supply - CoolerMaster Silent Pro M series 700W One suggestion made by OCUK was that maybe its the power supply but I'm not sure and dont have a spare - it's brand new and a pretty expensive piece of kit. Any thoughts on this? Other recomendations for Power? thanks Ben

  Read the article

• How can I unregister a service with dns-sd?

  - by Roman

  I am trying to use "dns-sd" command line tool on my Windows 7 machine. I can already do something. For example I can register a service using "dns-sd -R ...". I also can browser (see) registered services using "dns-sd -B ...". What I still miss, is how to unregister a service. At the moment when I type "dns-sd -R ..." the dns-sd does not return me to the command prompt. To return to the command prompt I need to press Ctrl-C. And the service stays registered till I press Ctrl-C. What I want is to run "dns-sd -R ..." in the background regime and then I would like to have a possibility to unregister a service from the command line. One more thing which I do not understand yet is what "to look up a service" means. In my picture it should be sufficient to register a service, to see it and then to unregister it. But apparently I need to look up a service. What does it mean and why I need to do it? ADDED: As it is asked, I clarify. I refer to "dns-sd" command line tool which I use in Windows 7. I think this command is part of Bonjour software for Windows (from Apple). Well, I did not checked if I had this command before I installed Bonjour, but I assume I did not have it. So, my question is about this command.

  Read the article

• I am getting this error "ssh_exchange_identification:"

  - by adnan kamili

  Every thing was working fine till yesterday and now suddenly I am getting this error if I type ssh -D 9999 [email protected] ssh_exchange_identification: Connection closed by remote host Here is the output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 172.16.30.30 [172.16.30.30] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/adnan/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/adnan/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/adnan/.ssh/id_rsa-cert type -1 debug1: identity file /home/adnan/.ssh/id_dsa type -1 debug1: identity file /home/adnan/.ssh/id_dsa-cert type -1 debug1: identity file /home/adnan/.ssh/id_ecdsa type -1 debug1: identity file /home/adnan/.ssh/id_ecdsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• IIS 7.5 Siteminder is not protecting ASP.net MVC requests

  - by HariM

  We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

  Read the article

• Can I have damaged a CPU ?

  - by Pascal

  Hey guys, This is a question I asked on Anantech forums, but I just discovered this community and think this question would fit right in. Here goes: I built a PC around a Q9550 1 1/2 years ago (MoBo is an Asus P5Q deluxe). Specs give 2.83GHz, OC'ed it to 3.40 GHZ without any problem (or so I thought) till 2 months ago. Cooling is provided by stock Intel Fan... 2 Months ago, I began to see random crashes, bios saying CPU overheat error... PC would reboot at OC'ed speed without any problem. Since last saturday and a few more crashes, PC won't reboot at 3.40 GHz, and even at stock speed (2.83 GHz), I got core temperatures of (60 C idle, 95 C under load) on the first two cores. This is the 4 core temperatures I am talking about, not the T-CPU which obvioulsy is lower. Fan is running at a steady 2000 RPM. Questions for you : 1. Is 2000 RPM the normal speed of the Intel fan or is my fan somehow broken (which could explain the overheating). In this case, any recommendation for a good fan for OCing ? 2. Hypothesis I fear is the right one: can the CPU have been slowly damaged over time by this OCing, meaning there is nothing much to do except waiting for it to die ? (As a side note, I am surprised that the 9550 is still around 300 $CDN here... Thought it would have been cheaper with all those i3/i5/i7 around). Any help or advice would be more than welcome...

  Read the article

• Configuration Help for Sendmail Required

  - by Vinayak Mahadevan

  Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

  Read the article

• Is there a way to avoid Wacom Control Panel to stop showing in certain cases ?

  - by S.gfx

  This is the problem: Suddenly, you double click on desktop wacom tablet settings icon, and it wont show the dialog. It appears to be loaded as it's shown down in the windows taskbar. I suspect is caused by change of resolution or some setting, maybe suddenly it sets the origin of the panel dialog at some 3000 thosand pixels to the right or something. I have digged that wacom_tablet.dat file to see if I fix it changing some value there, but looks like a log, a history, more than a ini for settings... And anyway does not solve it. My solution is having always a very complete settings file done and backed up to restore (with wacom utility for this, which in previous driver versions did not exist) when this happens, but is counter productive: You change the settings even per each project(and software) needs. I have seen it happenning with Cintiq 12", intuos4 A6, Graphires, Intuos 1. Is just me, doing something weird every time? I doubt it, is normal use, I am amazed that seems no one else had this prob(or nobody asked), happens often with typical use. Maybe is because am setting a shortcut in the desktop? Weird as it works perfect till some random moment... (Have digged Wacom's forums and FAQs, then here, but nothing related to it... Neither in "related questions".) The thing happens in Win XP, 7, etc. Done so during years in my experience, and several times at work, which is worse.

  Read the article

• mod_cache not working

  - by Pistos

  I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

  Read the article

• Reducing video mode switching during Linux boot

  - by Zack

  When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

• My New Dell Workstation T-7500 gives electric shock

  - by Dan

  Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

  Read the article

• How can I unregister a service with dns-sd?

  - by Roman

  I am trying to use "dns-sd" command line tool on my Windows 7 machine. I can already do something. For example I can register a service using "dns-sd -R ...". I also can browser (see) registered services using "dns-sd -B ...". What I still miss, is how to unregister a service. At the moment when I type "dns-sd -R ..." the dns-sd does not return me to the command prompt. To return to the command prompt I need to press Ctrl-C. And the service stays registered till I press Ctrl-C. What I want is to run "dns-sd -R ..." in the background regime and then I would like to have a possibility to unregister a service from the command line. One more thing which I do not understand yet is what "to look up a service" means. In my picture it should be sufficient to register a service, to see it and then to unregister it. But apparently I need to look up a service. What does it mean and why I need to do it?

  Read the article

• Uninstall php5 installed from source

  - by diegomichel

  I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

  Read the article

• Overriding vhost.conf to always allow PHP include access to directory

  - by Jeremy Dentel

  My predecessor in my job developed a simplistic newsletter system for our school's newspaper utilizing PEAR's Mail package. As I grow this system (and our site) we are constantly stuck with Plesk rewriting the vhost.conf file in which the PEAR include path has been manually entered. This has become an unwieldy task to actually manage and keep running. There's been a "note" from both the previous developer and I to attempt to solve this problem, but we can't entirely figure it out. I'm attempting a move to cPanel through another host, so hopefully it'll go away there, but until then, it can be tedious extremely difficult to get a solid uptake of the system without constant "web-presence." I've searched around and haven't found a solution. I'm rather new to the server management scene (command line was non-existant till around a year ago. =/), so I haven't found anything. Any help would be useful. "Similar Questions" popped this up, but it still seems to rely on vhost.conf, and will still allow changes within Plesk to overwrite the changes.

  Read the article

• repo sync "CyanogenMod/android_prebuilt" size and resume capability.?

  - by james

  I'm downloading CyanogenMod-10.1 source on a low speed broadband. About 4GB of source is downloaded . In that 4GB, there is a big project "CyanogenMod/android_frameworks_base" which alone took 1GB of download without any interruption. Ok now, after 4GB of download, my internet got disconnected and I had to stop (ctrl + z) repo sync while it was downloading the project "CyanogenMod/android_prebuilt". Before I stopped repo sync the android_prebuilt got downloaded till 250MB and is at 42percent. I checked the working folder and there is a file "tmp_pack_df5CKb" of size 250MB in the path "$WORKING_DIR/.repo/projects/prebuilt.git/objects/pack/" . Then I restarted repo sync and it was downloading the android_prebuilt project. But I'm not sure if it was downloading from start or resuming from 250MB. While downloading this time , the previous "tmp_pack_df5CKb" isn't deleted and the content is being downloaded to a new file "tmp_pack_HPfvFG". I heard repo sync cannot be resumed for a project. But here, since the previous file isn't deleted I want to ask if android_prebuilt is resuming or downloading from start again? Now that my high speed internet is over (current speed 256kbps), I'm not sure if I can download the remaining ~4GB if single project is in size 500 MB.

  Read the article

• Emptying Windows temp folder is a good idea?

  - by Siva Charan

  Am using DELL Inspiron with Windows 7. As far as I know emptying the windows temp folder would be good. But I faced a strange behaviour around 8 months back, when I clear my windows temp folder. The next day onwards, my laptop starting displaying daily one or other errors and one day OS got crashed. Till now I am not sure whether OS got crashed due to clearing the windows temp folder or something else is problem. Here Windows temp folder mean "C:\Windows\Temp" This is the behind the story. Today, this temp folder "C:\Windows\Temp" contains 102 GB Most of the space occupied by the files starts with etilqs_*.*. I came to know that these files are generated due to WD SmartWare. Now my problem is:- Actually I want clean up this folder, since it occupies lot of space. If I clean up "C:\Windows\Temp" folder, will my laptop face the same kind of problem which I faced earlier OR Any new problems will occur? Please suggest me a good solution.

  Read the article

• Blocking HTTPS and P2P Traffic

  - by Genboy

  I have a Debian server running at the gateway level on a LAN. This runs squid for creating block lists of websites - for eg. blocking social networking on the LAN. Also uses iptables. I am able to do a lot of things with squid & iptables, but a few things seem difficult to achieve. 1) If I block facebook through their http url, people can still access https://www.facebook.com because squid doesn't go through https traffic by default. However, if the users set the gateway IP address as proxy on their web browser, then https is also blocked. So I can do one thing - using iptables drop all outgoing 443 traffic, so that people are forced to set proxy on their browser in order to browse any HTTPS traffic. However, is there a better solution for this. 2) As the number of blocked urls increase in squid, I am planning to integrate squidguard. However, the good squidguard lists are not free for commercial use. Anyone knows of a good squidguard list which is free. 3) Block yahoo messenger, gtalk etc. There are so many ports on which these Instant Messenger softwares work. You need to drop lots of outgoing ports in iptables. However, new ports get added, so you have to keep adding them. And even if your list of ports is current, people can still use the web version of gtalk etc. 4) Blocking P2P. Haven't been able to figure out how to do this till now.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >