Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 36/243 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • How do I safely use a virus infected USB drive in Ubuntu?

    - by suhridk
    I have an USB drive which I know is virus infected (an anti-virus on my friend's machine detected it). Unfortunately neither of us know the virus name and I don't want to take the risk of plugging it to my Windows box again. Of course, in all probability the virus affects only Windows. (But I'm not sure) I want to know if I can safely plug the USB into my Ubuntu Lucid laptop and copy the stuff I need from the drive. If there are some precautions I need to follow what would they be?

    Read the article

  • Will the netinstall (minimal) work with a USB cellular modem?

    - by Z9iT
    Installing Ubuntu minimal is extremely easy when the system has a LAN card and connected to internet via Cable & Router... I Recently came across a situation where I needed to install Ubuntu Minimal on a system which wash not having a LAN card and cable internet anywhere around... The only access to the internet was through a USB Plug n Play Data-Card Modem. May anyone suggest something so that I may install Ubuntu Minimal using USB Modem as the only source of Internet, if it's possible at all?? (This relates to Ubuntu 12.04 in specific)

    Read the article

  • Do most front and rear USB connections deliver the same power and performance?

    - by Bratch
    I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

    Read the article

  • How do I install Ubuntu to a USB key?

    - by badp
    If you are hurrying to reply, System ? Administration ? StartUp Disk Creator -- no, that's not what I'm talking about. I want to try Ubuntu 11.04's Unity without touching my existing Ubuntu install. To do this, I need to install the nVidia drivers first (sigh). To do this, I need changes to persist a reboot. To do this, I need to really install Ubuntu on a USB key. How do you do that? What I tried I tried to make a USB key from Testdrive, then boot from it, then choose "Install Ubuntu." The installer refused to install to the installation media itself. I tried, from my installed copy of Ubuntu: sudo kvm /dev/sdb --cdrom .cache/testdrive/iso/ubuntu_natty-desktop-i386.iso ...but the installer didn't detect the disk properly.

    Read the article

  • Best usb storage for my router, Asus RT-AC66U?

    - by Jason94
    I have the ASUS RT-AC66U and I want to add a USB storage to it. It has 2x USB, and Im already using one for my printer. So the last one I want to use to attach a USB storage, and I've read some reviews stating the throughput of the USB could be up to 18 mb/s. So in regard of USB storage, should I care about hard disk cache? Simple powered-over-usb seems to have 8 mb cache, other (externally powered) has 16 for instance.

    Read the article

  • USB disk not recognized after detaching from DVD player. What to do?

    - by MMA
    I had one Transcend 4GB USB stick formatted to NTFS and was working fine. Today I inserted this disk into a DVD player, and it was saying, "loading". After a long time, noting happened, and it seemed that the stick (NTFS) is not recognized by it. I took out the stick and tried to reformat to FAT32. But the stick is not being recognized in my machine (Ubuntu 12.04). I tried the advices from USB drive not recognized after Erase Disk, without any success. When I tried Disk Utility, the stick is indicated as a generic device. See image, Formatting this device fails, saying, No medium found. Again see image, gparted does not even list this device. The same thing happens for fdisk. It is not listed there. Have I totally lost this stick? What should I do?

    Read the article

  • Booting but not rebooting from external USB hard drive, what could be the problem?

    - by user8276
    I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

    Read the article

  • Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

    - by user8276
    I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

    Read the article

  • What can i do if i made a bootable usb stick, but it doesn't work properly?

    - by eff
    Currently i have ubuntu 11.10 as an os and i want ubuntu 12.04 lts. I made a bootable usb stick with the program 'startup disk creator'. Everything went well (i choose the language, and then i choose ' install'), the purple screen with the title 'ubuntu' come up, it started loading too. After a time black screen come up with white letters last sentence was something like: panic occured, switching back to text. I tried it several times, the same thing happens. i tried to click on ' trying ubuntu from usb too, but it didn't work either . Please help me!

    Read the article

  • Recommended Linux distro to boot into RAM (from USB flash drive)?

    - by user91583
    I don't mind if I use USB flash drive or CD-ROM, but I would prefer USB flash drive. I had a squizz at http://en.wikipedia.org/wiki/List_of_Linux_distributions_that_run_from_RAM On my own computer, I would be able to use any of the distros in the list. The largest "RAM required" in the list is 4GB. I would like to be able to use it on any computer, so I suppose 1GB or less would be better. I tried to follow the method described on Distro that I can load into RAM? but the distro listed there, from Israel Remix Team, doesn't seem to be available. Before I start trial-and-error on different distros, does anyone have any recommendations?

    Read the article

  • make a computer recognized as a usb flash drive?

    - by user137560
    Is there anyway to make a folder or a partition on a computer (Linux/windows) to act like a flash drive to other computers or devices when connected with a usb cable. For example, I have a windows 7 computer with 2 partitions c and d, then connect that computer to another computer or a smart TV using a USB cable (has to be male to male USB cable) then the other computer or TV recognizes the current computer as a usb device. Is that possible, if not is there any usb switch to connect an external hard drive or flash drive to both the computer and TV without the need to manually switch them (I know about some USB switches but they only support automatic switching with some certain types of printers, not with mass storage) Thanks in advanced! Sam

    Read the article

  • change USB vendor id / product id

    - by Hugh Allen
    Under Windows, is there any easy way to change or forge the vendor and product id of a USB device? Say for example there's a useful program which expects a particular (but ubiquitous and generic) device but you think it will probably work with the device that you actually have. I've done lots of Googling and apparently you can do it under Linux so it occurs to me to run Windows in a VM under Linux, but that would be a bit inconvenient.

    Read the article

  • 16GB Usb Flash Drive shows as 16MB and is unusable

    - by Karim
    i have a sandisk Cruzer 16GB usb flash drive but it started to show up as 16MB. and i cant use it , it tells me that i need to format the drive or "Please insert a disk into drive X" does anyone have any recommadation for any software so i can check the flash drive? Edit: i cant format it since the format fails and well the idea is that it shows as 16MB instead of 16GB

    Read the article

  • Powering-down USB Powered Devices on laptop sleep

    - by Carl
    I recently purchased a Targus Lap Chill Mat, which is a USB powered device, but doesn't have any interface/storage/etc function. I'd like it to power-down when my (macbook) laptop sleeps (since the fan obviously doesn't need to be running when the laptop is idle) without having to unplug it. Any suggestions?

    Read the article

  • USB sound card with 6.3mm jack output

    - by Andrei Rinea
    I have a pair of Sennheiser 555 semi-professional headphones. These have a 6.3mm jack and a 3.5mm jack adapter. I wish I could buy an USB sound card for my laptop that would have a 6.3mm output not 3.5mm so I could skip this adapter and lose less quality. Any recommendations?

    Read the article

  • No audio from USB device on iMac

    - by brandon
    My computer froze the other day and started a buzzing noise. After I restarted in the middle of it, the buzzing persisted. A few restarts later, the buzzing stopped, but I can't get audio to come from my audio interface setup anymore. I'm using an M-Audiophile USB to connect to studio monitors, and there's absolutely no audio. I've tried restarting many times and unplugging - still nothing. Any help would be appreciated.

    Read the article

  • Establishing Serial Port communication through USB in Linux

    - by Prashant Singh
    I am new to Ubuntu and I need to establish a serial port communication between my PC and microcontroller MSP430G2452. On connection the USB available with the Launchpad and using lsusb. It identifies the port as: Bus 005 Device 003: ID 0451:f432 Texas Instruments, Inc. eZ430 Development Tool After establishing such a connection what I need to do? My aim is to send a byte of information in Linux.

    Read the article

  • "Bug code usb driver" blue screen in windows

    - by trinity
    Hi all, I have dual OS ( Fedora and windows xp ). for the past two months when i use windows xp, i'm frequently getting a blue screen with msg : " bug code usb driver ".Not knowing what to do next , i switch off the system and reboot it. Can anyone help me understand why this is happening , and how to troubleshoot this problem.. Here's the info provided about this problem after system restarts : BCCode : fe BCP1 : 00000004 BCP2 : 88F3BA08 BCP3 : 88E9FB10 BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

    Read the article

  • Disable USB drives during boot up?

    - by Jordan S. Jones
    I have 2 external USB harddrives that are on/active during the boot process. I believe that Windows7 is looking at those drives while booting, which is causes bootup to take longer. Is there a way that I can disable these drives until after the OS has booted to the logon screen?

    Read the article

  • Cannot share files on USB drive between Windows 98 and Windows 2000

    - by Ken Pespisa
    I've run into a strange situation where I can't share files between Windows 98 and Windows 2000 using a USB flash drive. Files I put on the Win98 machine can be read by that machine, but not by the Win2k machine. And likewise, I can add and read files on that drive from the Win2k machine, but those files don't appear on the drive when accessed from the Win98 machine. Anyone have ideas as to what could be the cause of this?

    Read the article

  • PXE boot from USB NIC

    - by JoelHess
    Is there a USB solution to PXE boot? I want to use ghost or clonezilla or something to image a bunch of units that don't have on board ethernet, and no clear real way to add to it.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >