Search Results

Search found 12766 results on 511 pages for 'little b'.

Page 360/511 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

  • Computer Turns on Briefly then right back off again.

    - by goddamnyouryan
    So yesterday I came home from work and went to turn my computer on....it turned on for about 5 seconds then promptly turned right back off again...before I ever saw anything on the screen. I tried again, same result. After several attempts, I've found that the length at which it turns on differs. After trying multiple times in a row, it only stays on for about 3 seconds. If I let it rest for a bit it sometimes will stay on for up to a minute (though it never boots, the screen stays black the whole time). I'm not sure what is causing this issue...I built this computer a little more than 2 years ago and this is the first issue I have ever had with it. I did all the usual checks: -It's not the power switch -The capacitors on the motherboard all seem to be in working order -The PSU seems to be fine as it lights up, fan spins, and will sometimes stay on for about a minute period My hope is that the thermal paste on the cpu has degraded and just needs to be re-applied. Does that seem like a reasonable assumption? I'm going to tear the thing apart and do a minimum system build when I get home, but any heads up as to what I should be looking for would be much appreciated. Any thoughts?

    Read the article

  • Windows 7 just deleted 4 days of work

    - by Mat
    Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

    Read the article

  • Monitoring Between EC2 Regions

    - by ABrown
    I'm working on a small EC2 project that involves a handful of servers in two different regions (US East and EU West). My first task is to implement a Nagios monitoring solution. Monitoring within a region is simple - I just use the private domain names/IPs, but I'm a little unsure of the best way to handle monitoring the second region without setting up a second Nagios install. The environment is fairly static, so I'm not going to be scripting the configuration with the EC2 tools just yet. As I see it, I have two options. Two Nagios installations (which is over-kill for the small number of servers I'm dealing with). Pros: I don't have to alter the group permissions nor do I have to pay for the traffic, redundancy in the monitoring solution - I could monitor the Nagios servers. Cons: two installations to deal with and I'd need to run another server instance. Have the single installation monitor both regions. Pros: one installation to deal with. Cons: slightly reduced security - security group will have to have NRPE (5666) opened for one source IP and also paying for a small amount of bandwidth at the Internet rate for data transfer between the regions. I guess my question is - how have others handled this problem and what are your recommendations? Thanks!

    Read the article

  • Apache forwarding without redirecting (application won't follow redirects)

    - by DrewVS
    Recently we had to move /task to /public/task, and I'd like to configure Apache to redirect accordingly. However, using mod_rewrite, though it works in the browser, seems to break applications making api calls to the above location. What happens is the application returns a page with the message saying the page was moved, but the app doesn't follow the redirect. So, is there a way to simply forward any traffic to /task to /public/task without 'redirecting', i.e, returning a redirect status code? EDIT: Here's a little more information. I've found a simple test to clarify what I'm trying to fix. Here is the URL path that needs forwarding: https://mydomain.com/task Needs to go to: https://mydomain.com/public/task If I use curl against the original domain, it just returns a redirect page notice. If I add the -L flag, which tells curl to follow redirects, it then follows the redirect successfully. I assume something very similar is happening in the application (which I don't have access to) that makes calls to the /task URL path. Since I cannot modify the application to make it follow redirects properly, I'm looking for a solution I can implement in Apache.

    Read the article

  • Printer irregularly producing garbage output

    - by John Gardeniers
    Every now and then instead of getting the proper output we get numerous pages, mostly with just a single line, of output which appears to be the raw PCL. My theory is that this happens when the first byte or two of the document is somehow not received by the printer, which then doesn't know how to interpret the rest and does it's best by spitting it out as text. This is a problem I've seen many times over the years but has been popping up more often since we upgraded to Win 7 64 bit, which introduced a number of headaches because of the HP lack of real support for 64 bits. It also appears to happen most often when printing PDF files. We have tried several different PDF readers in addition to Adobe's own but that hasn't helped. While we mainly use HP printers, and the problem is not limited to any particular model, I've also seen it happen on other brands, albeit to a lesser extent. I've also been unable to discern a difference between printers used via a print server or those connected directly by IP address. It also happens to USB attached printers. Because of the erratic nature of this problem there is precious little I can think of to try and debug it, so I'm after any ideas that might help to eliminate it.

    Read the article

  • How do I install gfortran (via cygwin and etexteditor) and enable ifort under Windows XP?

    - by bez
    I'm a newbie in the Unix world so all this is a little confusing to me. I'm having trouble compiling some Fortran files under Cygwin on Windows XP. Here's what I've done so far: Installed the e text editor. Installed Cygwin via the "automatic" option inside e text editor. I need to compile some Fortran files so via the "manage bundles" option I installed the Fortran bundle as well. However, when I select "compile single file" I get an error saying gfortran was missing, and then that I need to set the TM_FORTRAN variable to the full path of my compiler. I tried opening a Cygwin bash shell at the path mentioned (.../bin/gfortran), but the compiler was nowhere to be found. Can someone tell me how to install this from the Cygwin command line? Where do I need to update the TM_FORTRAN variable for the bundle to work? Also, how do I change the bundle "compile" option to work with ifort (my native compiler) on Windows? I've read the bundle file, but it is totally incomprehensible to me. Ifort is a Windows compiler, invoked simply by ifort filename.f90, since it is on the Windows path. I know this is a lot to ask of a first time user here, but I really would appreciate any time you can spare to help.

    Read the article

  • How to setup a virtual host in Ubuntu running on Amazon EC2 instance?

    - by Rade
    I have an app that's accessible via 1.2.3.4/myapp. The app is installed in /var/www/myapp. I've set up a subdomain(apps.mydomain.com) that points to 1.2.3.4. I want the server to point to var/www/myapp if I type apps.mydomain.com/myapp, how do I do that? I have experience creating virtual hosts(lots of them) locally but I'm lost because it's now in production and it's a little different. Here's my virtual host config: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName apps.mydomain.com/myapp DocumentRoot /var/www/myapp/public <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Any idea why I still see the files instead of pointing me to the document root? Just in case someone might ask, the app is based on Laravel 4 framework. It's really bad right now because anyone can access the files from the browser.

    Read the article

  • Some Portions of Computer Running Slow (Specifically Graphics)

    - by Mike Gates
    I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

    Read the article

  • Revoke directory access for a particular user in Solaris

    - by permissiontomars
    I have a need to allow directory access to a particular user on my file system. I want this user to be unable to access any other directory in my file system (initially anyway. It may need access to some directories later). For example: I have a directory called /opt/mydir. - I want my dedicated user to only be able to access this directory, and nothing else. - I want all other users to be able to access this directory as normal. I'm new to Linux and its permissions. I've read a fair bit of background material but I'm a little confused. Is there anyway to revoke permissions to /opt/mydir for a single dedicated user? A possible flawed method would be to only allow access to /opt/mydir and exclude every other user. This won't work because I want all other users to work as normal; accessing the directory. I'm working on Solaris 10. Any suggestions are appreciated.

    Read the article

  • Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

    - by ShimmerGeek
    My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

    Read the article

  • Get more space for redis in unix server

    - by DevTraveler
    In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

    Read the article

  • How to configure SVN server for my own project

    - by user1729952
    I work with a team on an Android project using Eclipse IDE, we need to use a version control and we need to access the repo remotely, I have no experience using or installing servers, a little experience using SVN on Windows, but I still have problems connecting to it remotely. I need to use no-ip.com to change my IP, however; I failed to make VisualSVN server to work with no-ip. What options do I have? The best thing is to get it work with Windows if not, I have another computer that is running Ubuntu 12.4.1, I have installed apache2svn on it trying to get it work, the svn is installed, I went through tutorials to configure accessing protocols, but I can't figure out how to access it remotely from another computer? Can someone tell me the steps I need to get this job done and I can do my search for each step? (Please explain each step as some keywords or phrases I may not be familiar with) EDIT: Also worth noting, that my company has a website hosted on a remote server, can we use it as a repo? and how? It's running Linux

    Read the article

  • How many bootable partitions are possible to have on one hard drive?

    - by draiden
    This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

    Read the article

  • Print over the internet from a remote linux session locally (on a Windows 7 machine) to the shared printers?

    - by obeliksz
    I'm trying to use a linux virtual machine as a file server for windows clients. I have successfully implemented remote file sharing (samba+ssh) with which I am able to print locally with a little program that I made for this purpose (jetforms style)... but I would like to hear about a somewhat more direct approach. How can I attach the printers to the server, so that I can for example open a file on the remote session and in the print dialogbox I would see my local printers (on the machine from which I have established a remote session)? I guess there should be some kind of putty tunneling, but dont know how. I have a windows 7 machine locally; there is a CentOS 6 VM over the internet. It has ssh, cups, and samba. I have found a question which asks the opposite: there is a windows based server to connect form linux but that windows has a domain, mine is just a simple windows workstation that is behind NAT and has a dynamic IP. That question is: Print from Linux to Windows networked printer.

    Read the article

  • How can I find which logon script is being run?

    - by user2517266
    I'm having an issue with network drives. Suddenly some computers and users aren't getting their mapped network drives from the logon script. I am NOT a domain admin, I don't have permission to login to the domain controller. And I know very little about Active Directory. The issue seems random, some users this day, different users tomorrow. Some computers run fine and some won't map no matter who logs in. They are mixed OS's XP (SP3), Vista, and 7. I was looking at the domain in windows explorer and I have found the batch file(s) that maps the drives in several locations, how do I know which one is actually being ran? The .bat file is located in \DOMAIN\NETLOGON\script.bat and \DOMAIN\SYSVOL\DOMAIN\scripts\script.bat and \DOMAIN\SYSVOL\DOMAIN\policies\GUID(Right? It's a crazy string)\User\Scripts\Logon\script.bat So, how can I figure out which one is actually being ran per computer or user? Cause they are all slightly different from each other and one of them doesn't map properly. Do all the files in NETLOGON get ran? Cause there are 15+ files in there. Or is it specified in Group Policy which one(s) get ran? EDIT: I am able to access a program called Active Directory Users and Computers, but the properties tab for any user is blank for the logon script.

    Read the article

  • How can I extend / create a new partition from the following setup?

    - by Kiada
    I'm a little unsure what to do in this situation. When I try to create a new simple volume from the unallocated space I get an error because I already have 4 partitions. I have no option to extend either my C:\ primary partition or the E:\ logical drive. C:\ - Gaming Win7 install. D:\ - Storage Unallocated Space - Would somehow like to install OSX on a partition from this space. E:\ - Software Development Win7 install. I:\ - Ignore this. It's an external 1TB HDD. Do I have any options that do not involve formatting / losing information on either C:\ or E:\? Thank you. Link to visual disk partitioning setup image. Edit: A bit more information regarding partitions. Firstly, the image linked above is a screenshot of Windows 7 partitioning tool, easier to read than text I guess! H:\ System Reserved: 100MB NTFS C:\ 244 GB NTFS Healthy (Page File, Primary Partition) D:\ 294 GB NTFS Healthy (Primary Partition) E:\ 100 GB NTFS Healthy (Boot, Page File, Crash Dump, Logical Drive) Unallocated 292 GB Hope this helps :)

    Read the article

  • How to turn a DSL wireless modem to a wifi hub

    - by my_question
    I used to use DSL for my home internet and used Qwest Q1000 wireless modem. Now I switched to cable and use wireless router to cover the home. One problem is I just bought a desktop and I like to put it in a place far away from the router. The desktop only has cable interface, it does not receive wifi. The obvious solution is I go buy that little USB dongle which can receive wifi and plug it to the desktop. But before doig that, I am wondering if somehow I can re-use the Q1000 modem. The modem has 4 LAN ports and it has wifi antenna. I tried connecting the desktop to Q1000's LAN port, the system shows wire connection is in place, but I cannot access internet. It seems to me Q1000's wifi function is to broadcast the wifi signal out instead of receiving signal. I went to the Q1000 configuration page by going to web page of "192.168.0.1", it is not clear how to set it up. I also wonder one thing, my home wifi is encrypted, so if I want to let Q1000 to join the wifi, I need to somehow type in the password, I am not sure how to do that either. Anyway, maybe this thing cannot be used in this fashion. If you have any suggestion, please shed some light. Thanks.

    Read the article

  • Reasons for Ajax navigation breaking on Coldfusion/Apache when running an app in iOS fullscreen mode? [closed]

    - by frequent
    Not sure if this belongs to SO or here. I'm running a webApp using jquery, jquerymobile, requireJS and apache, coldfusion8, mysql 5.0.88 serverside. The app works fine until I try to run it in fullscreen mode on iOS (add icon to homescreen, launch app from there with <meta name="apple-mobile-web-app-capable" content="yes" /> specified). This meta tag will break the Jquery Mobile AJAX navigation. The AJAX request will fail and the requested page will be loaded as a new page, thereby restarting the app on every page change. I have chased this through the whole front end starting from requireJS through Jquery Mobiles AJAX navigation down to the AJAX request being made in Jquery. xhr.send( ( s.hasContent && s.data ) || null ); In regular browser this works no problem. In fullscreen mode, this fails (readystate=0, empty response). I have found this article, which argues that fullscreen mode is like a browser instance with different HTTP strings. On ASP.net this results in the browser not being identified by the server and only basic browser settings being assumed (e.g. no Javascript). I'm a little lost where to start looking for possible reasons serverside. I have not written any server code for handling Ajax page navigation, so this must be something that is handled out of the box by Coldfusion or Apache? Question: Where could I start looking for problable causes of fullscreen mode breaking AJAX navigation if I assume Coldfusion or Apache are the culprits? Is there a setting I'm missing in httpd.config? What else could be the problem? Thanks for inputs!

    Read the article

  • What could be causing windows to fail to sleep or hibernate, and revert system settings?

    - by xdumaine
    I am running Windows 8.1 on my system (Dell e6520) and the symptoms are this: My PC won't sleep or hibernate. It the screen turns off, but the fans just run and run, and after a little while, it completely shuts down, and when I start it back up, everything is closed, like it was a fresh boot/restart. I'm have a weird issue with outlook described here and the fix works fine - modifying a registry value. The weirder part is that after my computer fails to sleep or hibernate, and it starts back up, the registry value is GONE, like I never modified it, and thus the outlook error message is back. I thought maybe a graphics driver was preventing the sleep/hibernate, so I attempted to uninstall the NVIDIA graphics driver and control panel. HOWEVER, once the computer fails to sleep/hibernate, the NVIDIA graphics driver and control panel appear BACK on my system, like I didn't uninstall them. What could be happening here? I really need to be able to sleep/hibernate so I don't lose work or my work state, and these issues are really concerning. What I've tried, without success: Uninstalling graphics driver mentioned above Disabling hibernate and using sleep disabling/re-enabling hibernate Disabling startup items Sleeping as local system admin account disconnecting all USB, network, and bluetooth devices

    Read the article

  • Java process eating CPU; Why?

    - by Camran
    I have a Linux server which I have installed Java on. Sometimes, and only sometimes when a large nr of visitors visit my website, the site hangs. When I open the terminal and enter the "top" command to see whats going on, I can see that "Java" process is eating CPU! Like 400%. I have also tried ps aux command, and can see that the command is from usr/bin/java I have little experience in troubleshooting this kind of things, so I turn to you guys for help. I have a java container installed (Jetty) which I must have in order to use SOLR (search engine) which is integrated into my website. I can start and stop SOLR by: etc/init.d/solr stop But this didn't remove the java process from the "Top" command. Still java was eating 400% CPU. Is there other methods to restart java only? This has happened twice to me, and each time I have now restarted my entire servers and everithing is fine. If you need more input let me know! Thanks

    Read the article

  • Benchmark Linq2SQL, Subsonic2, Subsonic3 - Any other ideas to make them faster ?

    - by Aristos
    I am working with Subsonic 2 more than 3 years now... After Linq appears and then Subsonic 3, I start thinking about moving to the new Linq futures that are connected to sql. I must say that I start move and port my subsonic 2 with SubSonic 3, and very soon I discover that the speed was so slow thats I didn't believe it - and starts all that tests. Then I test Linq2Sql and see also a delay - compare it with Subsonic 2. My question here is, especial for the linq2sql, and the up-coming dotnet version 4, what else can I do to speed it up ? What else on linq2sql settings, or classes, not on this code that I have used for my messures I place here the project that I make the tests, also the screen shots of the results. How I make the tests - and the accurate of my measures. I use only for my question Google chrome, because its difficult for me to show here a lot of other measures that I have done with more complex programs. This is the most simple one, I just measure the Data Read. How can I prove that. I make a simple Thread.Sleep(10 seconds) and see if I see that 10 seconds on Google Chrome Measure, and yes I see it. here are more test with this Sleep thead to see whats actually Chrome gives. 10 seconds delay 100 ms delay Zero delay There is only a small 15ms thats get on messure, is so small compare it with the rest of my tests that I do not care about. So what I measure I measure just the data read via each method - did not count the data or database delay, or any disk read or anything like that. Later on the image with the result I show that no disk activity exist on the measures See this image to see what really I measure and if this is correct Why I chose this kind of test Its simple, it's real, and it's near my real problem that I found the delay of subsonic 3 in real program with real data. Now lets tests the dals Start by see this image I have 4-5 calls on every method, the one after the other. The results are. For a loop of 100 times, ask for 5 Rows, one not exist, approximatively.. Simple adonet:81ms SubSonic 2 :210ms linq2sql :1.70sec linq2sql using CompiledQuery.Compile :239ms Subsonic 3 :15.00sec (wow - extreme slow) The project http://www.planethost.gr/DalSpeedTests.rar Can any one confirm this benchmark, or make any optimizations to help me out ? Other tests Some one publish here this link http://ormbattle.net/ (and then remove it - don not know why) In this page you can find a really useful advanced tests for all, except subsonic 2 and subsonic 3 that I have here ! Optimizing What I really ask here is if some one can now any trick how to optimize the DALs, not by changing the test code, but by changing the code and the settings on each dal. For example... Optimizing Linq2SQL I start search how to optimize Linq2sql and found this article, and maybe more exist. Finally I make the tricks from that page to run, and optimize the code using them all. The speed was near 1.50sec from 1.70.... big improvement, but still slow. Then I found a different way - same idea article, and wow ! the speed is blow up. Using this trick with CompiledQuery.Compile, the time from 1.5sec is now 239ms. Here is the code for the precompiled... Func<DataClassesDataContext, int, IQueryable<Product>> compiledQuery = CompiledQuery.Compile((DataClassesDataContext meta, int IdToFind) => (from myData in meta.Products where myData.ProductID.Equals(IdToFind) select myData)); StringBuilder Test = new StringBuilder(); int[] MiaSeira = { 5, 6, 10, 100, 7 }; using (DataClassesDataContext context = new DataClassesDataContext()) { context.ObjectTrackingEnabled = false; for (int i = 0; i < 100; i++) { foreach (int EnaID in MiaSeira) { var oFindThat2P = compiledQuery(context, EnaID); foreach (Product One in oFindThat2P) { Test.Append("<br />"); Test.Append(One.ProductName); } } } } Optimizing SubSonic 3 and problems I make many performance profiling, and start change the one after the other and the speed is better but still too slow. I post them on subsonic group but they ignore the problem, they say that everything is fast... Here is some capture of my profiling and delay points inside subsonic source code I have end up that subsonic3 make more call on the structure of the database rather than on data itself. Needs to reconsider the hole way of asking for data, and follow the subsonic2 idea if this is possible. Try to make precompile to subsonic 3 like I did in linq2Sql but fail for the moment... Optimizing SubSonic 2 After I discover that subsonic 3 is extreme slow, I start my checks on subsonic 2 - that I have never done before believing that is fast. (and it is) So its come up with some points that can be faster. For example there are many loops like this ones that actually is slow because of string manipulation and compares inside the loop. I must say to you that this code called million of times ! on a period of few minutes ! of data asking from the program. On small amount of tables and small fields maybe this is not a big think for some people, but on large amount of tables, the delay is even more. So I decide and optimize the subsonic 2 by my self, by replacing the string compares, with number compares! Simple. I do that almost on every point that profiler say that is slow. I change also all small points that can be even a little faster, and disable some not so used thinks. The results, 5% faster on NorthWind database, near 20% faster on my database with 250 tables. That is count with 500ms less in 10 seconds process on northwind, 100ms faster on my database on 500ms process time. I do not have captures to show you for that because I have made them with different code, different time, and track them down on paper. Anyway this is my story and my question on all that, what else do you know to make them even faster... For this measures I have use Subsonic 2.2 optimized by me, Subsonic 3.0.0.3 a little optimized by me, and Dot.Net 3.5

    Read the article

  • CSS drop-down menus pushing page content down

    - by Mason Jones
    This is probably (hopefully) a pretty simple question, but I can't seem to get it to work so I'll turn to the experts here. I'm using a pretty straightforward CSS drop-down menu, with just a little JQuery involved. The issue is that when I hover over the drop-down and it opens, it's pushing everything on the page down below it rather then opening over it. I've tried messing with the z-index but that doesn't seem to be the issue. Any tips would be fantastic, thanks in advance. Here's the HTML; sorry it's not super-pretty, I had to rip out a bunch of stuff to make it simple and generic. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <HTML style="zoom: 100%; "> <HEAD> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.0/jquery.min.js" type="text/javascript"></script> </HEAD> <BODY class="bodyclass" style="background:#BCE2F1; height: 100%;"> <DIV id="maincontainer" style="min-height: 100%;"> <STYLE type="text/css"> #cssdropdown, #cssdropdown ul { font-size: 9pt; background-color: black; list-style: none; } #cssdropdown, #cssdropdown * { padding: 0; margin: 0; } #cssdropdown li.headlink { width: 140px; float: left; margin-left: -1px; border: 1px black solid; background-color: white; text-align: center; } #cssdropdown li.headlink a { display: block; color: #339804; padding: 3px; text-decoration: none; } #cssdropdown li.headlink a:hover { background-color: #F8E0AC; font-weight: bold; } #cssdropdown li.headlink ul { display: none; border-top: 1px black solid; text-align: left; } #cssdropdown li.headlink:hover ul { display: block; text-decoration: none; } #cssdropdown li.headlink ul li a { padding: 5px; height: 15px; } #cssdropdown li.headlink ul li a:hover { background-color: #CCE9F5; text-decoration: none; font-weight: normal; } /* #cssdropdown a { color: #CCE9F5; } */ #cssdropdown ul li a:hover { text-decoration: none; } #cssdropdown li.headlink { background-color: white; } #cssdropdown li.headlink ul { background-color: white; background-position: bottom; padding-bottom: 2px; } </STYLE> <SCRIPT language="JavaScript"> $(document).ready(function(){ $('#cssdropdown li.headlink').hover( function() { $('ul', this).css('display', 'block'); }, function() { $('ul', this).css('display', 'none'); }); }); </SCRIPT> <DIV class="navigation_box" style="border: none;"> <DIV class="innercontent"> <DIV style="background: white; float: left; padding: 5px; border: solid 1px black;"> LOGO </DIV> <DIV class="navmenu" style="float: right; bottom: 0; font-size: 9pt; text-align: right;"> <SPAN>Logged in as [email protected]</SPAN><BR> <UL id="cssdropdown"> <LI class="headlink"> <A href="http://localhost:3000/one">One</A> <UL style="display: none; "> <LI><A href="http://localhost:3000/one">Option One</A></LI> <LI><A href="http://localhost:3000/one">Option Two</A></LI> <LI><A href="http://localhost:3000/one">Option Three</A></LI> <LI><A href="http://localhost:3000/one">Option Four</A></LI> </UL> </LI> <LI class="headlink"> <A href="http://localhost:3000/two">Two</A> <UL style="display: none; "> <LI><A href="http://localhost:3000/two">Option Two-One</A></LI> <LI><A href="http://localhost:3000/two">Option Two-Two</A></LI> <LI><A href="http://localhost:3000/two">Option Two-Three</A></LI> </UL> </LI> <LI class="headlink" style="width: 80px;"> <A href="http://localhost:3000/three">Three</A> </LI> <LI class="headlink" style="width: 300px; padding-top: 2px; height: 19px;"> <FORM action="http://localhost:3000/search" method="post"> <P> Search: <INPUT id="searchwords" name="searchwords" size="20" type="text" value=""> <INPUT name="commit" type="submit" value="Find"> </P> </FORM> </LI> <LI class="headlink" style="width: 60px;"> <A href="http://localhost:3000/four">Four</A> </LI> <LI class="headlink" style="width: 60px;"> <A href="http://localhost:3000/logout">Logout</A> </LI> </UL> </DIV> </DIV> </DIV> <DIV id="contentwrapper" style="clear:both"> <DIV class="innercontent" style="margin: 0px 20px 20px 20px;"> <H1>Some test content here to fill things out a little bit.</H1> </DIV> </DIV> </DIV> <DIV id="footer" style="clear: both; float: bottom;"> <DIV class="innercontent" style="font-size: 10px;"> Copyright 2008-2010 </DIV> </DIV> </BODY>

    Read the article

  • Something is making my page perform an Ajax call multiple times... [read: I've never been more frust

    - by Jack Webb-Heller
    NOTE: This is a long question. I've explained all the 'basics' at the top and then there's some further (optional) information for if you need it. Hi folks Basically last night this started happening at about 9PM whilst I was trying to restructure my code to make it a bit nicer for the designer to add a few bits to. I tried to fix it until 2AM at which point I gave up. Came back to it this morning, still baffled. I'll be honest with you, I'm a pretty bad Javascript developer. Since starting this project Javascript has been completely new to me and I've just learn as I went along. So please forgive me if my code structure is really bad (perhaps give a couple of pointers on how to improve it?). So, to the problem: to reproduce it, visit http://furnace.howcode.com (it's far from complete). This problem is a little confusing but I'd really appreciate the help. So in the second column you'll see three tabs The 'Newest' tab is selected by default. Scroll to the bottom, and 3 further results should be dynamically fetched via Ajax. Now click on the 'Top Rated' tab. You'll see all the results, but ordered by rating Scroll to the bottom of 'Top Rated'. You'll see SIX results returned. This is where it goes wrong. Only a further three should be returned (there are 18 entries in total). If you're observant you'll notice two 'blocks' of 3 returned. The first 'block' is the second page of results from the 'Newest' tab. The second block is what I just want returned. Did that make any sense? Never mind! So basically I checked this out in Firebug. What happens is, from a 'Clean' page (first load, nothing done) it calls ONE POST request to http://furnace.howcode.com/code/loadmore . But every time you load a new one of the tabs, it makes an ADDITIONAL POST request each time where there should normally only be ONE. So, can you help me? I'd really appreciate it! At this point you could start independent investigation or read on for a little further (optional) information. Thanks! Jack Further Info (may be irrelevant but here for reference): It's almost like there's some Javascript code or something being left behind that duplicates it each time. I thought it might be this code that I use to detect when the browser is scrolled to the bottom: var col = $('#col2'); col.scroll(function(){ if (col.outerHeight() == (col.get(0).scrollHeight - col.scrollTop())) loadMore(1); }); So what I thought was that code was left behind, and so every time you scroll #col2 (which contains different data for each tab) it detected that and added it for #newest as well. So, I made each tab click give #col2 a dynamic class - either .newestcol, .featuredcol, or .topratedcol. And then I changed the var col=$('.newestcol');dynamically so it would only detect it individually for each tab (makin' any sense?!). But hey, that didn't do anything. Another useful tidbit: here's the PHP for http://furnace.howcode.com/code/loadmore: $kind = $this->input->post('kind'); if ($kind == 1){ // kind is 1 - newest $start = $this->input->post('currentpage'); $data['query'] = "SELECT code.id AS codeid, code.title AS codetitle, code.summary AS codesummary, code.author AS codeauthor, code.rating AS rating, code.date, code_tags.*, tags.*, users.firstname AS authorname, users.id AS authorid, GROUP_CONCAT(tags.tag SEPARATOR ', ') AS taggroup FROM code, code_tags, tags, users WHERE users.id = code.author AND code_tags.code_id = code.id AND tags.id = code_tags.tag_id GROUP BY code_id ORDER BY date DESC LIMIT $start, 15 "; $this->load->view('code/ajaxlist',$data); } elseif ($kind == 2) { // kind is 2 - featured So my jQuery code sends a variable 'kind'. If it's 1, it runs the query for Newest, etc. etc. The PHP code for furnace.howcode.com/code/ajaxlist is: <?php // Our query base // SELECT * FROM code ORDER BY date DESC $query = $this->db->query($query); foreach($query->result() as $row) { ?> <script type="text/javascript"> $('#title-<?php echo $row->codeid;?>').click(function() { var form_data = { id: <?php echo $row->codeid; ?> }; $('#col3').fadeOut('slow', function() { $.ajax({ url: "<?php echo site_url('code/viewajax');?>", type: 'POST', data: form_data, success: function(msg) { $('#col3').html(msg); $('#col3').fadeIn('fast'); } }); }); }); </script> <div class="result"> <div class="resulttext"> <div id="title-<?php echo $row->codeid; ?>" class="title"> <?php echo anchor('#',$row->codetitle); ?> </div> <div class="summary"> <?php echo $row->codesummary; ?> </div> <!-- Now insert the 5-star rating system --> <?php include($_SERVER['DOCUMENT_ROOT']."/fivestars/5star.php");?> <div class="bottom"> <div class="author"> Submitted by <?php echo anchor('auth/profile/'.$row->authorid,''.$row->authorname);?> </div> <?php // Now we need to take the GROUP_CONCATted tags and split them using the magic of PHP into seperate tags $tagarray = explode(", ", $row->taggroup); foreach ($tagarray as $tag) { ?> <div class="tagbutton" href="#"> <span><?php echo $tag; ?></span> </div> <?php } ?> </div> </div> </div> <?php } echo "&nbsp;";?> <script type="text/javascript"> var newpage = <?php echo $this->input->post('currentpage') + 15;?>; </script> So that's everything in PHP. The rest you should be able to view with Firebug or by viewing the Source code. I've put all the Tab/clicking/Ajaxloading bits in the tags at the very bottom. There's a comment before it all kicks off. Thanks so much for your help!

    Read the article

  • Would anyone tell me how to fetch the media:thumb element's attribute from a json feed?

    - by ash
    I made a yahoo pipe that pulls up the atoms as json format; however, I can fetch and display all the elements in my html page except for the element's attribute. Would anyone tell me how to fetch the media:thumb element's attribute from a json feed? I am pasting the html page's code with javascript. If you save the html page and then view it in browser, you will see that all the necessary elements get output at html page except for the media:thumb as I cannot display the attribute of media:thumb when the feed is formatted as json. I am also pasting the some portion of the json feed so that you can have an idea what i am talking about. Please tell me how to retrieve attribute from media:thumb element of a json feed by using plain javascript but no server side code or javascript library. Thank you. function getFeed(feed){ var newScript = document.createElement('script'); newScript.type = 'text/javascript'; newScript.src = 'http://pipes.yahoo.com/pipes/pipe.run?_id=40616620df99780bceb3fe923cecd216&_render=json&_callback=piper'; document.getElementsByTagName("head")[0].appendChild(newScript); } function piper(feed){ var tmp=''; for (var i=0; i'; tmp+=feed.value.items[i].title+''; tmp+=feed.value.items[i].author.name+''; tmp+=feed.value.items[i].published+''; if (feed.value.items[i].description) { tmp+=feed.value.items[i].description+''; } tmp+='<hr>'; } document.getElementById('rssLayer').innerHTML=tmp; } </script> bchnbc .............................................................. Some portion of the json feed that gets generated by yahoo pipe .............................................................. piper({"count":2,"value":{"title":"myPipe","description":"Pipes Output","link":"http:\/\/pipes.yahoo.com\/pipes\/pipe.info?_id=f7f4175d493cf1171aecbd3268fea5ee","pubDate":"Fri, 02 Apr 2010 17:59:22 -0700","generator":"http:\/\/pipes.yahoo.com\/pipes\/","callback":"piper", "items": [{ "rights":"Attribution - Noncommercial - No Derivative Works", "link":"http:\/\/vodo.net\/mixtape1", "y:id":{"value":null,"permalink":"true"}, "content":{"content":"We're proud to be releasing this first VODO MIXTAPE. Actual tape might be a thing of the past, but before P2P, mixtapes were the most popular way of sharing popular culture the world had known -- and once called the 'most widely practiced American art form'. We want to resuscitate the spirit of the mixtape for this VODO MIXTAPE series: compilations of our favourite shorts, the weird, the wild and the wonky, all brought together in a temporary and uncomfortable company.","type":"text"}, "author": {"name":"Various"}, "description":"We're proud to be releasing this first VODO MIXTAPE. Actual tape might be a thing of the past, but before P2P, mixtapes were the most popular way of sharing popular culture the world had known -- and once called the 'most widely practiced American art form'. We want to resuscitate the spirit of the mixtape for this VODO MIXTAPE series: compilations of our favourite shorts, the weird, the wild and the wonky, all brought together in a temporary and uncomfortable company.", "media:thumbnail": { "url":"http:\/\/vodo.net\/\/thumbnails\/Mixtape1.jpg" }, "published":"2010-03-08-09:20:20 PM", "format": { "audio_bitrate":null, "width":"608", "xmlns":"http:\/\/xmlns.transmission.cc\/FileFormat", "channels":"2", "samplerate":"44100.0", "duration":"3092.36", "height":"352", "size":"733925376.0", "framerate":"25.0", "audio_codec":"mp3", "video_bitrate":"1898.0", "video_codec":"XVID", "pixel_aspect_ratio":"16:9" }, "y:title":"Mixtape #1: VODO's favourite short films", "title":"Mixtape #1: VODO's favourite short films", "id":null, "pubDate":"2010-03-08-09:20:20 PM", "y:published":{"hour":"3","timezone":"UTC","second":"0","month":"4","minute":"10","utime":"1270264200","day":"3","day_of_week":"6","year":"2010" }}, {"rights":"Attribution - Noncommercial - No Derivative Works","link":"http:\/\/vodo.net\/gilbert","y:id":{"value":"cd6584e06ea4ce7fcd34172f4bbd919e295f8680","permalink":"true"},"content":{"content":"A documentary short about Gilbert, the Beacon Hill \"town crier.\" For the last 9 years, since losing his job and becoming homeless, Gilbert has delivered the weather, sports, and breaking headlines from his spot on the Boston Common. Music (used with permission) in this piece is called \"Blue Bicycle\" by Dusseldorf-based pianist \/ composer Volker Bertelmann also known as Hauschka. Artistic Statement: This is the first in a series of profiles of people who I think are interesting, and who I see on almost a daily basis. I don't want to limit the series to people who live \"on the fringe,\" but it would be appropriate to say that most of the people I interview are eclectic, eccentric, and just a little bit unique. The art is in the viewing - but I hope to turn my lens on individuals that don't always color in the lines, whether they can help it or not.","type":"text"},"author":{"name":"Nathaniel Hansen"},"description":"A documentary short about Gilbert, the Beacon Hill \"town crier.\" For the last 9 years, since losing his job and becoming homeless, Gilbert has delivered the weather, sports, and breaking headlines from his spot on the Boston Common. Music (used with permission) in this piece is called \"Blue Bicycle\" by Dusseldorf-based pianist \/ composer Volker Bertelmann also known as Hauschka. Artistic Statement: This is the first in a series of profiles of people who I think are interesting, and who I see on almost a daily basis. I don't want to limit the series to people who live \"on the fringe,\" but it would be appropriate to say that most of the people I interview are eclectic, eccentric, and just a little bit unique. The art is in the viewing - but I hope to turn my lens on individuals that don't always color in the lines, whether they can help it or not.","media:thumbnail":{"url":"http:\/\/vodo.net\/\/thumbnails\/gilbert.jpeg"},"published":"2010-03-03-10:37:05 AM","format":{"audio_bitrate":null,"width":"624","xmlns":"http:\/\/xmlns.transmission.cc\/FileFormat","channels":"2","samplerate":null,"duration":"373.673","height":"352","size":"123321266.0","framerate":null,"audio_codec":"mp3","video_bitrate":null,"video_codec":"XVID","pixel_aspect_ratio":"16:9"},"y:title":"Gilbert","title":"Gilbert","id":"cd6584e06ea4ce7fcd34172f4bbd919e295f8680","pubDate":"2010-03-03-10:37:05 AM","y:published":{"hour":"3","timezone":"UTC","second":"0","month":"4","minute":"10","utime":"1270264200","day":"3","day_of_week":"6","year":"2010" }} ] }})

    Read the article

  • How to find an entry-level job after you already have a graduate degree?

    - by Uri
    Note: I asked this question in early 2009. A couple of months later, I found a great job. I've previously updated this question with some tips for whoever ends up in a similar situation, and now cleaned it up a little for the benefit of the fresh batch of graduates. Original post: In my early 20s I abandoned a great C++ development career path in a major company to go to graduate school and get a research masters (3 years). I did another year in industrial research, and then moved to the US to attend graduate school again, getting another masters and a Ph.D in software engineering from a top school (another 6 years down the drain). I was coding the whole way throughout my degrees (core Java and Eclipse plug-ins) and working on research related to software engineering (usability of APIs). I ended up graduating the year of the recession, with a son on the way and the prospects of no healthcare. Academic jobs and industrial research jobs are quite scarce. Initially, I was naive, thinking that with my background, I could easily find a coding job. Big mistake. It turns out that I'm in a complicated position. Entry level positions are usually offered to college undergraduates. I attended my school's career fairs, but you could immediately see signs of Ph.D. aversion and overqualification issues. Some of the recruiters I spoke with explicitly told me that they wanted 20 year olds with clean slates, and some were looking for interns since they are in various forms of hiring freezes. I managed to get a couple of interviews from these career fairs and through recruiters. However, since I've been out of school for a long time and programming primarily in Java, I am also no longer proficient in C/C++ and the usual range of college-level interview questions that everyone uses. I had no problems with this when I was 19 and interviewing for my first job since a lot of what you do in C is manipulate pointers and I was coding C++ for fun and for school. Later I was routinely doing pointer manipulation on the job, and during my first masters taught college courses with data structures and C++. But even though I remember many properties of C++ well, it's been close to ten years since I regularly used C++ and pointers. As a Java developer I rarely had to work at this level, but experience in OOD and in writing good maintainable code is meaningless for C++ interviews. Reading books as a refresh and looking at sample code did not do the trick. I also looked at mid-to-senior level Java positions, but most of them focused on J2EE APIs rather than on core Java and required a certain number of years in industrial positions. Coding research tools and prior C++ experience doesn't count. So that sends me back to entry-level jobs that are posted through job-boards, and these are not common (mostly they are Monster junk), and small companies are even less likely to answer a Ph.D. compared to the giants who participate in top-10 career fairs. Even worse, in many companies initial screening is done by HR folks who really don't want to deal with anything anomalous like a Ph.D. Any tips on how I should approach this intractable position? For example, what should I write in cover letters? Note that while immigration is not an issue for me, I cannot go freelance as I need the benefits (and in particular group health insurance). During my studies I had no time to contribute to open-source projects or maintain a popular blog, so even if I invested in that now there would be no immediate benefit. Updates: In the two months after posting this I received several offers to work as a core Java developer in the financial industry and accepted one from a firm where I am working to this day. For those who find themselves in similar situations, here are my tips: Give up on trying to find an entry level positions. You can't undo time. Accept the fact that there is Ph.D. discrimination in the job market (some might say rightfully so). It is legal to discriminate based on education. No point fighting it. The most important tip is to focus on the language you are comfortable with. The sad truth about programming in a particular language is that it is not like riding a bike. If you haven't used a language in the last few years, and can't actually apply it routinely (not just as a refresher) before you start your search, it is going to be very difficult to do well in an interview. Now that I'm interviewing others, I routinely see it in folks with a mixed C++/Java background. We maintain "a shadow" of the old language but end up with a weird mix that makes it hard to interview on either. Entry-level folks are at an advantage here since they usually have one language. Memory can help you do great in a screening interview, but without recent day-to-day experience, code tests will be difficult. Despite the supposed relation, core Java programming and J2EE programming are two different things with different skillsets. If you come from academia, you likely have very little J2EE experience and may find it hard to get accepted for a J2EE job. J2EE jobs seem to have a larger list of acronyms in their requirements. In addition, from interviewing J2EE developers it seems that for many there is a focus on mastering specific APIs and architectures, whereas core Java development tends to be secondary. In the same way that I can no longer manipulate pointers well, a J2EE developer may have difficulties doing low level Java manipulation. This puts you at a relative advantage in competing for core Java jobs! If you are able to work for startups (in terms of family life and stability) or migrate to startup-rich areas such as the west coast, you can find many exciting opportunities where advanced degrees are a benefit. I've since been approached by several startups, although I had to decline. Work through a recruiter if possible. They have direct contacts with the hiring parties, allowing you to "stand out". It is better to get a clear yes/no confirmation from a recruiter on whether a company might be interested in interviewing you, than it is to send your resume and hope that someone will ever see it. Recruiters are also a great way of bypassing HR. However, also beware of recruiters. They have a vested interest and will go to various shady practices and pressure tactics. To find a good recruiter, talk to a friend who declined a job offer he got through a recruiter. A good recruiter, to me, is measured in how they handle that. Interview for the jobs that require your core strength. If you're rusty or entirely unfamiliar with a technology around which the job revolves, you're probably not a good match. Yes, you probably have the talent to master them, but most companies would want "instant gratification". I got my offers from companies that wanted core Java developer. I didn't do well on places that wanted advance C++ because I am too rusty and not up to date on recent libraries. I also didn't hear from companies that wanted lots of J2EE experience, and that's ok. Finding companies that want core Java without web is harder, but exists in specific industries (e.g., finance, defense). This requires a lot more legwork in terms of search, but these jobs do exist. There are different interview styles. Some companies focus on puzzles, some companies focus on algorithms, and some companies focus on design and coding skills. I had the most success in places where the questions were the most related to the function I would have been performing. Pick companies accordingly as well.

    Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >