Search Results

Search found 17430 results on 698 pages for 'false positive'.

Page 362/698 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• How to alter image pixels of a wild life bird?

  - by NoobScratcher

  Hello so I was hoping someone knew how to move or change color and position actual image pixels and could explain and show the code to do so. I know how to write pixels on a surface or screen-surface usigned int *ptr = static_cast <unsigned int *> (screen-pixels); int offset = y * (screen->pitch / sizeof(unsigned int)); ptr[offset + x] = color; But I don't know how to alter or manipulate a image pixel of a png image my thoughts on this was How do I get the values and locations of pixels and what do I have to write to make it happen? Then how do I actually change the values or locations of those gotten pixels and how do I make that happen? any ideas tip suggestions are also welcome! int main(int argc , char *argv[]) { SDL_Surface *Screen = SDL_SetVideoMode(640,480,32,SDL_SWSURFACE); SDL_Surface *Image; Image = IMG_Load("image.png"); bool done = false; SDL_Event event; while(!done) { SDL_FillRect(Screen,NULL,(0,0,0)); SDL_BlitSurface(Image,NULL,Screen,NULL); while(SDL_PollEvent(&event)) { switch(event.type) { case SDL_QUIT: return 0; break; } } SDL_Flip(Screen); } return 0; }

  Read the article

• Is it common to only pay developers for the time they said a project would take?

  - by BAM

  I work at a small startup (<10 people), and I was recently assigned (along with one other developer) to a relatively small project. The project involved moving an existing iOS app to Android. The client told us they had built the app for iOS in 300 man-hours. Not knowing at the time that this figure was completely false, we naively and optimistically assumed that if they could build the app from scratch in that amount of time, we could easily "port" it in a similar amount of time. Therefore, we drafted up a fixed-price contract based on 350 man-hours, with a 5 week deadline. (We are well aware now of how big of a mistake this was... Never let the client tell you how long it's going to take!) Anyway, by week 4 we had already surpassed our 350 hours, and we estimated that there were at least 2 more weeks left on the project. We were told to continue working, but that the company could not afford to pay out on overdue projects anymore. I thought this just meant "be more careful about estimates in the future". However a few weeks later, the company president informed us that we would not be getting paid for any time past 350 man-hours. We argued over the issue for almost an hour. He claimed, however, that this is standard practice for many organizations, and that I was unreasonable for making a big deal out of it. So is this really a common thing, or am I justified in being upset about it? Thanks in advance for any advice!

  Read the article

• Java enum pairs / "subenum" or what exactly?

  - by vemalsar

  I have an RPG-style Item class and I stored the type of the item in enum (itemType.sword). I want to store subtype too (itemSubtype.long), but I want to express the relation between two data type (sword can be long, short etc. but shield can't be long or short, only round, tower etc). I know this is wrong source code but similar what I want: enum type { sword; } //not valid code! enum swordSubtype extends type.sword { short, long } Question: How can I define this connection between two data type (or more exactly: two value of the data types), what is the most simple and standard way? Array-like data with all valid (itemType,itemSubtype) enum pairs or (itemType,itemSubtype[]) so more subtype for one type, it would be the best. OK but how can I construct this simplest way? Special enum with "subenum" set or second level enum or anything else if it does exists 2 dimensional "canBePairs" array, itemType and itemSubtype dimensions with all type and subtype and boolean elements, "true" means itemType (first dimension) and itemSubtype (second dimension) are okay, "false" means not okay Other better idea Thank you very much!

  Read the article

• What level of detail to use in an interface members descriptions?

  - by famousgarkin

  I am extracting interfaces from some classes in .NET, and I am not completely sure about what level of detail of description to use for some of the interface members (properties, methods). An example: interface ISomeInterface { /// <summary> /// Checks if the object is checked out. /// </summary> /// <returns> /// Returns true if the object is checked out, or if the object locking is not enabled, /// otherwise returns false. /// </returns> bool IsObjectCheckedOut(); } class SomeImplementation : ISomeInterface { public bool IsObjectCheckedOut() { // An implementation of the method that returns true if the object is checked out, // or if the object locking is not enabled } } The part in question is the <returns>...</returns> section of the IsObjectCheckedOut description in the interface. Is it ok to include such a detail about return value in the interface itself, as the code that will work with the interface should know exactly what that method will do? All the current implementations of the method will do just that. But is it ok to limit the possible other/future implementations by description this way? Or should this not be included in the interface description, as there is no way to actually ensure that other/future implementations will do exactly this? Is it better to be as general as possible regarding the interface in such circumstances? I am currently inclined to the latter option.

  Read the article

• VS2012 Coded UI Test closes browser by default

  - by Tarun Arora

  *** Thanks to Steve St. Jean for asking this question and Shubhra Maji for answering this question on the ALM champs list *** 01 – Introduction The default behaviour of coded UI tests running in an Internet Explorer browser has changed between MTM 2010 and MTM 2012. When running a Coded UI test recorded in MTM 2012 or VS 2012 at the end of the test execution the instance of the browser is closed by default. 02 – Description Let’s take an example. As you can see the CloseDinnerNowWeb() method is commented out.  In VS 2010, upon running this test the browser would be left open after the test execution completes. In VS 2012 RTM the behaviour has changed. At the end of the test run, the IE window is closed even though there is no command from the test to do so. In the example below when the test runs, it opens 2 IE windows to the website. When the test run completes both the windows are closed, even though there is no command in the test to close the window. 03 – How to change the CUIT behaviour not to close the IE window after test execution? This change to this functionality in VS 2012 is by design. It is however possible to rollback the behaviour to how it originally was in VS 2010 i.e. the IE window will not close after the test execution unless otherwise commanded by the test to do so. To go back to the original functionality, set BrowserWindow.CloseOnPlaybackCleanup = false More details on the CloseOnPlaybackCleanup property can be found here http://msdn.microsoft.com/en-us/library/microsoft.visualstudio.testtools.uitesting.applicationundertest.closeonplaybackcleanup.aspx  HTH

  Read the article

• Unity Problem with colliding instances of same object

  - by Kuba Sienkiewicz

  I want to check if object's instance is overlapping with another instance (any spawned object with another spawned object, not necessary the same object). I'm doing this by detecting collisions between bodies. But I have a problem. Spawned object (instances) are detecting collision with everything but other spawned objects. I've checked collision layers etc. All of spawned objects have rigidbodies and mesh colliders. Also when I attach my script to another body and I touch that body with an instanced object it detects collision. So problem is visible only in collision between spawned objects. And one more information I have script, rigid body and collider attached to child of main object. using UnityEngine; using System.Collections; public class CantPlace : MonoBehaviour { public bool collided = false; // Use this for initialization void Start () { } // Update is called once per frame void Update () { //Debug.Log (collided); } void OnTriggerEnter(Collider collider) { //if (true) { //foreach (Transform child in this.transform) { // if (child.name == "Cylinder") { //collided = true; Color c; c = this.renderer.material.color; c.g = 0f; c.b = 1f; c.r = 0f; this.renderer.material.color = c; Debug.Log (collider.name); //} // } //} //foreach (ContactPoint contact in collision.contacts) { // Debug.DrawRay(contact.point, contact.normal, Color.red,15f); // } } }

  Read the article

• Software center is not working after attempt to install skype

  - by user288690

  I am completely new person on Linux. I installed it just today and i have to say I like them a lot, until I faced the problem. I was looking on the internet but nothing worked for me. After i downloaded skype and tried to run it, software center showed up and was loading something for 5 mins. then it just dessapeared. Now everytime I try to turn it on, the window is gone after 3 sec. I tried to kill it but didnt really wokrked. I get this message when trying to run it from the terminal: whats_new_cat = self._update_whats_new_content() File "/usr/share/software-center/softwarecenter/ui/gtk3/views/lobbyview.py", line 240, in _update_whats_new_content docs = whats_new_cat.get_documents(self.db) File "/usr/share/software-center/softwarecenter/db/categories.py", line 131, in get_documents nonblocking_load=False) File "/usr/share/software-center/softwarecenter/db/enquire.py", line 330, in set_query self._blocking_perform_search() File "/usr/share/software-center/softwarecenter/db/enquire.py", line 225, in _blocking_perform_search matches = enquire.get_mset(0, self.limit, None, xfilter) File "/usr/share/software-center/softwarecenter/db/appfilter.py", line 89, in __call__ if (not pkgname in self.cache and File "/usr/share/software-center/softwarecenter/db/pkginfo_impl/aptcache.py", line 281, in __contains__ return self._cache.__contains__(k) AttributeError: 'NoneType' object has no attribute '__contains when trying to kill it via terminal, it says there is no process like this. Thx guys for help! Help me like Ubuntu for rest of my life! :P

  Read the article

• Why does my fan run so hard on my Dell XPS 15z?

  - by Kilhoffer

  I recently bought a Dell XPS 15z. It came with Windows 7 Home Premium, but I really wanted to try out Ubuntu on it. I ran the Windows installer and was surprised how smooth the process was. Within 10 minutes, I had a dual boot setup with Ubuntu 11.10. It boots into Ubuntu just fine and everything seems to work. I've read a lot about problems with touchpad and wireless, but honestly, I've had none of those issues. The only thing that's really bothering me is the fan constantly runs fast. Under Windows, it rarely ever came on and when it did, it wasnt spinning that fast. What could be going on under Ubuntu that would cause this? I want to get that under control because I want to use Ubuntu as my primary OS and screw Windows. Any help would be much appreciated! Note: I've read that others have set acpi=false, but I have not made any changes to the default installation. Should I make that change?

  Read the article

• Web Services and code lists

  - by 0x0me

  Our team heavily discuss the issues how to handle code list in a web service definition. The design goal is to describe a provider API to query a system using various values. Some of them are catalogs resp. code lists. A catalog or code list is a set of key value pairs. There are different systems (at least 3) maintaining possibly different code lists. Each system should implement the provider API, whereas each system might have different code list for the same business entity eg. think of colors. One system know [(1,'red'),(2,'green')] and another one knows [(1,'lightgreen'),(2,'darkgreen'),(3,'red')] etc. The access to the different provider API implementations will be encapsulated by a query service, but there is already one candidate which might use at least one provider API directly. The current options to design the API discussed are: use an abstract code list in the interface definition: the web service interface defines a well known set of code list which are expected to be used for querying and returning data. Each API provider implementation has to mapped the request and response values from those abstract codelist to the system specific one. let the query component handle the code list: the encapsulating query service knows the code list set of each provider API implementation and takes care of mapping the input and output to the system specific code lists of the queried system. do not use code lists in the query definition at all: Just query code lists by a plain string and let the provider API implementation figure out the right value. This might lead to a loose of information and possibly many false positives, due to the fact that the input string could not be canonical mapped to a code list value (eg. green - lightgreen or green - darkgreen or both) What are your experiences resp. solutions to such a problem? Could you give any recommendation?

  Read the article

• Why do I have an error when adding states in slick?

  - by SystemNetworks

  When I was going to create another state I had an error. This is my code: public static final int play2 = 3; and public Game(String gamename){ this.addState(new mission(play2)); } and public void initStatesList(GameContainer gc) throws SlickException{ this.getState(play2).init(gc, this); } I have an error in the addState. above the above code. I don't know where is the problem. But if you want the whole code it is here: package javagame; import org.newdawn.slick.*; import org.newdawn.slick.state.*; public class Game extends StateBasedGame{ public static final String gamename = "NET FRONT"; public static final int menu = 0; public static final int play = 1; public static final int train = 2; public static final int play2 = 3; public Game(String gamename){ super(gamename); this.addState(new Menu(menu)); this.addState(new Play(play)); this.addState(new train(train)); this.addState(new mission(play2)); } public void initStatesList(GameContainer gc) throws SlickException{ this.getState(menu).init(gc, this); this.getState(play).init(gc, this); this.getState(train).init(gc, this); this.enterState(menu); this.getState(play2).init(gc, this); } public static void main(String[] args) { try{ AppGameContainer app =new AppGameContainer(new Game(gamename)); app.setDisplayMode(1500, 1000, false); app.start(); }catch(SlickException e){ e.printStackTrace(); } } } //SYSTEM NETWORKS(C) 2012 NET FRONT

  Read the article

• Error running Solr

  - by Jon H

  I'm trying to install Apache Solr for Plone, via collective.solr. I've followed the instructions above, and extended my buildout with: [buildout] extends = buildout.cfg https://github.com/Jarn/collective.solr/raw/master/buildout/solr.cfg [instance] eggs += collective.solr bin/buildout runs fine, however, when I try bin/solr-instance fg I get the following error: Traceback (most recent call last): File "bin/solr-instance", line 114, in <module> start(False) File "bin/solr-instance", line 43, in start stdout=logfp, stderr=logfp).pid File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory Graceful stop What am I missing / doing wrong?

  Read the article

• Changing time or offsetting it in OpenVZ contained server

  - by Milad Naseri

  I am trying to run a VPS, a Debian box contained in an OpenVZ container. Obviously, I cannot use time --set or any such command, as the time must be set via the parent node. The owner of the parent node, however refuses to adjust the time (which is 30 minutes slower than the actual time). All the programs on my system, consequently, now recognized the false time and this throws a wrench in my syncing. Is there a way to possibly change the system time without interference from the container's administrator? Or perhaps, failing that, a way to make the programs "see" the time 30 minutes faster than what is reported by the container?

  Read the article

• XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

  - by D. Dubya

  I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

  Read the article

• ISP 5 Device Limit ... again

  - by Tommo

  Sorry for the delay in responding to the suggestions that were posted in my first question (ISP 5 Device Limit - double NAT the solution?). I've been travelling and have not been able to try anything. Below is what I've tried and where I have not been successful. Any more help gratefully appreciated. I figure I need to give a more comprehensive overview of what I've got and how it's set up. First of all - I am using all Apple products here. I am iMac, iPad, iPhone, Apple TV, Airport Express and Time Capsule. I used to like the way that it 'just worked'. Now I find that it requires a bit of encouragement before it 'just works'. So, as I stated in my original question; my ISP has a router in my building that is limiting me to 5 devices. I am hard wired into this router and I can neither access it physically nor logically (they won't let me access it). Also, I only appear to be able to connect to it through the LAN ports on my Time Capsule. Any device I connect appears to be on a rolling IP list with the following settings: Router 91.72.80.1 Devices then get assigned IPv4 addresses in the range (as far as I can see) from 91.72.80.2 onwards. SubNet Mask 255.255.255.0 DNS Servers 213.132.63.25, 80.227.2.4 I have my Time Capsule / Router in Bridge-Mode which means I am limited to the 5 devices and cannot use Guest Networks etc. What I've tried today. Static IPs: On all devices, I went from DHCP to Static and put in the same information when they had connected using DHCP. Somewhat surprisingly this did not work. None of the devices enjoyed any connection to the router and certainly no internet connection. Intentional Double-NAT - Time Capsule to 'DHCP and NAT': By selecting DHCP and NAT on my Router I was able to connect devices to my Time Capsule in the range 10.0.1.2 to 10.0.1.200. This offered no internet connectivity and didn't really help the situation. In this mode, however, I was able to force the devices - individually and laboriously - to look for the Router and previously listed DNSs by inputting the numbers from 'Bridge-mode' into the STATIC settings and then resetting the connection. The Router then appeared to assign a distinct IP address to the device and it worked on the network. I had this working for more than 5 devices. However, this is not a great solution because as soon as one of the mobile devices left the building it needed repointing to the Router. The connections were also not very stable. Especially when trying to hold onto a VPN. Spoofing a few MAC addresses: I'm afraid I don't really know what this would achieve, nor how to do it on an Apple device… So … I'm almost back at Square One. I have had to withdraw to the Bridge-Mode position again with the 5 device limit to see if there's a better course of action to follow. ANY help would be much appreciated. I am positive that I cannot be the only one suffering under this 5 device limit!

  Read the article

• Collision detection - player gets stuck in platform when jumping

  - by Sun

  So I'm having some problems with my collision detection with my platformer. Take the image below as an example. When I'm running right I am unable to go through the platform, but when I hold my right key and jump, I end up going through the object as shown in the image, below is the code im using: if(shapePlatform.intersects(player.getCollisionShape())){ Vector2f vectorSide = new Vector2f(shapePlatform.getCenter()[0] - player.getCollisionShape().getCenter()[0], shapePlatform.getCenter()[1] - player.getCollisionShape().getCenter()[1]); player.setVerticleSpeed(0f); player.setJumping(false); if(vectorSide.x > 0 && !(vectorSide.y > 0)){ player.getPosition().set(player.getPosition().x-3, player.getPosition().y); }else if(vectorSide.y > 0){ player.getPosition().set(player.getPosition().x, player.getPosition().y); }else if(vectorSide.x < 0 && !(vectorSide.y > 0)){ player.getPosition().set(player.getPosition().x+3, player.getPosition().y); } } I'm basically getting the difference between the centre of the player and the centre of the colliding platform to determine which side the player is colliding with. When my player jumps and walks right on the platform he goes right through. The same can also be observed when I jump on the actual platform, should I be resetting the players y in this situation?

  Read the article

• Deny directory browsing in a Proftpd / Ubuntu Installation

  - by skylarking

  I used this guide to set up a Proftpd installation an Ubuntu 8.04 server... Works well, but the generic user ( userftp ) can run ls and is able to change to any Directory and browse freely on the server ..from the root / and upwards.. I added this line to etc/shells /bin/false in hopes that that would prevent this ... I really only want the userftp account to be able to upload to the generic /home/FTP-Shared directory, and be able to do nothing else on the server. How is this accomplished ... This is a headless Ubuntu box..and I am using CLI only .. no GUI admin tools

  Read the article

• Nginx + PHP-FPM ignores no-cache headers

  - by Eric Winchell

  I'm using the following header on a php page. // Prevent page caching. header('Expires: Tue, 20 Oct 1981 05:00:00 GMT'); header('Cache-Control: no-store, no-cache, must-revalidate'); header('Cache-Control: post-check=0, pre-check=0', FALSE); header('Pragma: no-cache'); I'm also using a rand=999999999 (with a real random number) in the URLs. But pages are still being cached. Reload works, but first load is cached. Anyone know where I can change this?

  Read the article

• Ok to edit task's xml file in c:\windows\system32\Tasks?

  - by Eyad

  I wrote a PowerShell script that check the executable in the < action tag for each task in the Task directory and mark the < enabled TRUEorFALSE< / enabled tag as false/true depending on the validity of the digital signature of the executable. After reading each task, the script re-saves the task file with the same name, type and location. Now my issue is that I get this message when I lunch task scheduler: “Task XYZ: The task image is corrupt or has been tampered with.” This message appears for all the tasks that were scanned and saved. Does editing task’s xml file directly corrupt the task? Is there any task decency that may cause this error(ex: registry value)?

  Read the article

• I Can't run the Netbeans but I installed successfully

  - by David

  I'm new to Ubuntu as well as Netbeans. I installed Netbeans, and I've made sure to install all the JDKs and JREs I could find. It installed without errors. I also saw this question and made sure I followed all the instructions there as well. I never got any error messages of any kind. So far as I know, it installed okay. However, when I try to run Netbeans, I get the message in the bottom of the Netbeans IDE like this: ant -f /root/NetBeansProjects/samp1 -Djsp.includes=/root/NetBeansProjects/samp1/build/web/one.jsp -DforceRedeploy=false -Dclient.urlPart=/one.jsp -Ddirectory.deployment.supported=true -Djavac.jsp.includes=org/apache/jsp/one_jsp.java -Dnb.wait.for.caches=true run /root/NetBeansProjects/samp1/nbproject/build-impl.xml:774: The libs.CopyLibs.classpath property is not set up. This property must point to org-netbeans-modules-java-j2seproject-copylibstask.jar file which is part of NetBeans IDE installation and is usually located at <netbeans_installation>/java<version>/ant/extra folder. Either open the project in the IDE and make sure CopyLibs library exists or setup the property manually. For example like this: ant -Dlibs.CopyLibs.classpath=a/path/to/org-netbeans-modules-java-j2seproject-copylibstask.jar BUILD FAILED (total time: 0 seconds)

  Read the article

• SharePoint: UI for ordering list items

  - by svdoever

  SharePoint list items have in the the base Item template a field named Order. This field is not shown by default. SharePoint 2007, 2010 and 2013 have a possibility to specify the order in a UI, using the _layouts page: {SiteUrl}/_layouts/Reorder.aspx?List={ListId} In SharePoint 2010 and 2013 it is possible to add a custom action to a list. It is possible to add a custom action to order list items as follows (SharePoint 2010 description): Open SharePoint Designer 2010 Navigate to a list Select Custom Actions > List Item Menu Fill in the dialog box: Open List Settings > Advanced Settings > Content Types, and set Allow management of content types to No  On List Settings select Column Ordering This results in the following UI in the browser: Selecting the custom Order Items action (under List Tools > Items) results in: You can change your custom action in SharePoint designer. On the list screen in the bottom right corner you can find the custom action: We now need to modify the view to include the order by adding the Order field to the view, and sorting on the Order field. Problem is that the Order field is hidden. It is possible to modify the schema of the Order field to set the Hidden attribute to FALSE. If we don’t want to write code to do it and still get the required result it is also possible to modify the view through SharePoint Designer: Modify the code of the view: This results in: Note that if you change the view through the web UI these changes are partly lost. If this is a problem modify the Order field schema for the list.

  Read the article

• Power Shell does not like command

  - by Campo

  Any ideas what I did wrong here? I copied this script from a tutorial and get this error.... PS C:\Windows\system32> Get-Service | Where-Object ($_.status -eq "running") Where-Object : Cannot bind parameter 'FilterScript'. Cannot convert value "False" to type "System.Management.Automation .ScriptBlock". Error: "Invalid cast from 'System.Boolean' to 'System.Management.Automation.ScriptBlock'." At line:1 char:27 + Get-Service | Where-Object <<<< ($_.status -eq "running") + CategoryInfo : InvalidArgument: (:) [Where-Object], ParameterBindingException + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.WhereObjectCommand

  Read the article

• How to Structure a Trinary state in DB and Application

  - by ABMagil

  How should I structure, in the DB especially, but also in the application, a trinary state? For instance, I have user feedback records which need to be reviewed before they are presented to the general public. This means a feedback reviewer must see the unreviewed feedback, then approve or reject them. I can think of a couple ways to represent this: Two boolean flags: Seen/Unseen and Approved/Rejected. This is the simplest and probably the smallest database solution (presumably boolean fields are simple bits). The downside is that there are really only three states I care about (unseen/approved/rejected) and this creates four states, including one I don't care about (a record which is seen but not approved or rejected is essentially unseen). String column in the DB with constants/enum in application. Using Rating::APPROVED_STATE within the application and letting it equal whatever it wants in the DB. This is a larger column in the db and I'm concerned about doing string comparisons whenever I need these records. Perhaps mitigatable with an index? Single boolean column, but allow nulls. A true is approved, a false is rejected. A null is unseen. Not sure the pros/cons of this solution. What are the rules I should use to guide my choice? I'm already thinking in terms of DB size and the cost of finding records based on state, as well as the readability of code the ends up using this structure.

  Read the article

• How to copy password from Mono-executed KeePass2 to xterm on Linux?

  - by Steve Emmerson

  I use KeePass2 to access username/password information in a Dropbox file. This allows convenient access from multiple devices. I can't seem to copy a password to the clipboard on my Linux 2.6.27.41-170.2.117.fc10.x86_64 system, however, in order to supply the password to a prompt in an xterm(1). I've tried both Ctrl+C/Ctrl+V and highlighting and mouse button 2 clicking. The KeePass2 program on the Linux system is executed by Mono. How can I copy the password to the xterm(1)? [Aside: I think we need a "KeePass" tag.] ADDENDUM: My mouse buttons were misconfigured: button 2 wasn't set to "copy". Sorry for the false alarm.

  Read the article

• I'm a contract developer and I think I'm about to get screwed [closed]

  - by kagaku

  I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

  Read the article

• ArchBeat Link-o-Rama for December 12, 2012

  - by Bob Rhubart

  “Cloud Integration in Minutes” – True or False? | Bruce Tierney The answer is 'True, but..." according to Bruce Tierney. "Connecting on-premise and cloud applications “in minutes” is true…provided you only consider the connectivity subset of integration and have a small number of cloud integration touch points." Get the rest of the story in Bruce's detailed post. Tech World Discovers New Species: The Cloud Architect | Wired Enterprise | Wired.com This Wired article by Cade Metz boils down to one essential conclusion: Cloud computing is a significant departure from "data center designs of the past," and the demand for the specialized skills of the cloud architect will only increase. But you already knew that, right? Oracle B2B - Synchronous Request Reply | A-Team - SOA "Beginning with Oracle SOA Suite PS5 (11.1.1.6), B2B supports synchronous request reply over http using the b2b/syncreceiver servlet," says C. D. Wright of the Fusion Middleware A-Team. His post includes a demo and everything you need to run it. Thought for the Day "Don't worry about what anybody else is going to do… The best way to predict the future is to invent it." — Alan Kay (Month Day, Year - Month Day, Year) Source: SoftwareQuotes.com

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >