Search Results

Search found 16971 results on 679 pages for 'blogs'.

Page 363/679 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• Memory Glutton

  - by AreYouSerious

  I have to admit that I can't get enough storage. I have hard drives just sitting around in case I need to move somthing, or I'm going to a friends and either they want something I have or I want something they might have. What I'm going to talk about today is cost effective memory for devices. I don't know how this particualr device will work in a camera, as That's not what I use in my camera, in fact I don't have a camera that doesn't either use SD, or the old compact flash card, that's not so compact anymore. There's this thing that uses two micro sd cards to double the capacity of your memory, and it costs about 4 bucks, without the Micro SD card. I have had one for about a year and was going to throw it away because I couldn't get it to work with my computer, or with my Sony Reader. However I found out by one last ditch effort that this thing works beautifully with my Sony PSP. there is no software to speak of associated with this thing, you simply put in two SD cards of the same size... (if you put in two different sizes it will still work, you'll only double the smallest cards size though) and format through the psp. Viola you know have a 29 GB memory card for your PSP. why is this important ? well for starters you can carry more music and more videos. Second if you have gone the way of the hacker.... you can store more games on your card... There are just a few things you have to note.... I speak from experience... you have to use the usb connection to the PSP to do any file moving, as I said previously said card doesn't play well with my computers or card readers... I not saying it won't work at all, just hasn't work with anything I own. Second. If for some reason you try to Hack/crack your PSP don't attempt to delete a game from the psp, use the usb file browser to remove games. if you delete from the PSP you are likely to have to move all your files off, reformat and start again... just a couple things I have noticed... if I had done something like that.   anyway, Here's a link.... http://www.photofast-adapter.com/  and if you want to buy one, get it off ebay, I've seen them as low as $1.99

  Read the article

• Les Techn'Oracle Et Les Sales'Oracle Sont Là !

  - by swalker

  Les Techn'Oracle et les Sales'Oracle sont lancées en région. Comme chaque année, plusieurs centaines de collaborateurs de nos Partenaires vont se former sur nos offres et nos produits les plus récents ! Les Techn'Oracle visent à présenter le contenu technique de nos produits, et leurs avantages pour les Clients, en terme d'architecture, de TCO, de flexibilité pour les Systèmes d'Information. Les Sales'Oracle ont pour objet de montrer la valeur de nos offres en termes Clients, le "à quoi ça sert" pour permettre aux Partenaires d'augmenter leur présence et leurs revenus chez nos Clients >> Rendez-vous sur le Calendrier pour les dates et les thèmes ici

  Read the article

• ApiChange Corporate Edition

  - by Alois Kraus

  In my inital announcement I could only cover a small subset what ApiChange can do for you. Lets look at how ApiChange can help you to fix bugs due to wrong usage of an Api within a fraction of time than it would take normally. It happens that software is tested and some bugs show up. One bug could be …. : We get way too man log messages during our test run. Now you have the task to find the most frequent messages and eliminate the Log calls from the source code. But what about the myriads other log calls? How can we check that the distribution of log calls is nearly equal across all developers? And if not how can we contact the developer to check his code? ApiChange can help you too connect these loose ends. It combines several information silos into one cohesive view. The picture below shows how it is able to fill the gaps. The public version does currently “only” parse the binaries and pdbs to give you for a –whousesmethod query the following colums: If it happens that you have Rational ClearCase (a source control system) in your development shop and an Active Directory in place then ApiChange will try to determine from the source file which was determined from the pdb the last check in user which should be present in your Active Directory. From there it is only a small hop to an LDAP query to your AD domain or the GC (Global Catalog) to get from the user name his Full name Email Phone number Department …. ApiChange will append this additional data all of your query results which contain source files if you add the –fileinfo option. As I said this is currently not enabled by default since the AD domain needs to be configured which are currently only some hard coded values in the SiteConstants.cs source file of ApiChange.Api.dll. Once you got this data you can generate metrics based on source file, developer, assembly, … and add additional data by drag and drop directly into the pivot tables inside Excel. This allows you to e.g. to generate a report which lists the source files with most log calls in descending order along with the developer name and email in the pivot table. Armed with this knowledge you can take meaningful measures e.g. to ask the developer if the huge number of log calls in this source file can be optimized. I am aware that this is a very specific scenario but it is a huge time saver when you are able to fill the missing gaps of information. ApiChange does this in an extensible way. namespace ApiChange.ExternalData {     public interface IFileInformationProvider     {         UserInfo GetInformationFromFile(string fileName);     } } It defines an interface where you can implement your custom information provider to close the gap between source control system and the real person I have to send an email to ask if his code needs a closer inspection.

  Read the article

• Tab Sweep - Java EE wins, Prime Faces JSF, NetBeans, Jelastic for GlassFish, BeanValidation, Ewok and more...

  - by alexismp

  Recent Tips and News on Java, Java EE 6, GlassFish & more : • PrimeFaces 3.2 Final Released (primefaces.org) • Java EE wins over Spring (Bill Burke) • Customizing Components in JSF 2.0 (Mr. Bool) • Key to the Java EE 6 Platform: NetBeans IDE 7.1.x (OTN) • How to use GlassFish’s Connection Pool in Jelastic (jelastic.com) • Bean Validation 1.1 early draft 1 is out - time for feedback (Emmanuel) • Code artifacts published for Bean Validation 1.1 early draft 1 (Emmanuel) • Aprendendo Java EE 6 com GlassFish 3 e NetBeans 7.1 (Marcello) • JavaEE6 and the Ewoks (Murat)

  Read the article

• Iterative and Incremental Principle Series 4: Iteration Planning – (a.k.a What should I do today?)

  - by llowitz

  Welcome back to the fourth of a five part series on applying the Iteration and Incremental principle.  During the last segment, we discussed how the Implementation Plan includes the number of the iterations for a project, but not the specifics about what will occur during each iteration.  Today, we will explore Iteration Planning and discuss how and when to plan your iterations. As mentioned yesterday, OUM prescribes initially planning your project approach at a high level by creating an Implementation Plan.  As the project moves through the lifecycle, the plan is progressively refined.  Specifically, the details of each iteration is planned prior to the iteration start. The Iteration Plan starts by identifying the iteration goal.  An example of an iteration goal during the OUM Elaboration Phase may be to complete the RD.140.2 Create Requirements Specification for a specific set of requirements.  Another project may determine that their iteration goal is to focus on a smaller set of requirements, but to complete both the RD.140.2 Create Requirements Specification and the AN.100.1 Prepare Analysis Specification.  In an OUM project, the Iteration Plan needs to identify both the iteration goal – how far along the implementation lifecycle you plan to be, and the scope of work for the iteration.  Since each iteration typically ranges from 2 weeks to 6 weeks, it is important to identify a scope of work that is achievable, yet challenging, given the iteration goal and timeframe.  OUM provides specific guidelines and techniques to help prioritize the scope of work based on criteria such as risk, complexity, customer priority and dependency.  In OUM, this prioritization helps focus early iterations on the high risk, architecturally significant items helping to mitigate overall project risk.  Central to the prioritization is the MoSCoW (Must Have, Should Have, Could Have, and Won’t Have) list.   The result of the MoSCoW prioritization is an Iteration Group.  This is a scope of work to be worked on as a group during one or more iterations.  As I mentioned during yesterday’s blog, it is pointless to plan my daily exercise in advance since several factors, including the weather, influence what exercise I perform each day.  Therefore, every morning I perform Iteration Planning.   My “Iteration Plan” includes the type of exercise for the day (run, bike, elliptical), whether I will exercise outside or at the gym, and how many interval sets I plan to complete.    I use several factors to prioritize the type of exercise that I perform each day.  Since running outside is my highest priority, I try to complete it early in the week to minimize the risk of not meeting my overall goal of doing it twice each week.  Regardless of the specific exercise I select, I follow the guidelines in my Implementation Plan by applying the 6-minute interval sets.  Just as in OUM, the iteration goal should be in context of the overall Implementation Plan, and the iteration goal should move the project closer to achieving the phase milestone goals. Having an Implementation Plan details the strategy of what I plan to do and keeps me on track, while the Iteration Plan affords me the flexibility to juggle what I do each day based on external influences thus maximizing my overall success. Tomorrow I’ll conclude the series on applying the Iterative and Incremental approach by discussing how to manage the iteration duration and highlighting some benefits of applying this principle.

  Read the article

• Partitioning tutorial - new features in Oracle Database 12c

  - by KLaker

  For data warehousing projects Oracle Partitioning really is a must-have feature because it delivers so many important benefits such as: Dramatically improves query performance and speeds up database maintenance operations Lowers costs by enabling a tiered storage approach that allows data to be stored on the most cost-effective storage for better resource utilisation Combined with Oracle Advanced Compression, it provides an automated approach to information lifecycle management using a simple, efficient, yet powerful way to manage data growth and reduce complexity and costs To help you get the most from partitioning we have released a new tutorial that covers the 12c new features. Topics include how to: Use Interval Reference Partitioning Perform Cascading TRUNCATE and EXCHANGE Operations Move Partitions Online Maintain Multiple Partitions Maintain Global Indexes Asynchronously Use Partial Indexes For more information about this tutorial follow this link to the Oracle Learning Library: http://apex.oracle.com/pls/apex/f?p=44785:24:0::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:8408,2 where you can begin your tutorial right now! For more information about Oracle Partitioning visit our home page on OTN: http://www.oracle.com/technetwork/database/bi-datawarehousing/dbbi-tech-info-part-100980.html

  Read the article

• Du heartbeat pour les assets

  - by P. Cendrowski

  Avant la version 4.6 du manager ASR, la notion de heartbeat s'entent uniquement entre le manager ASR et l'infrastructure Oracle. Il n'y avait pas de heartbeat au niveau de l'asset. Pour rappel, le heartbeat sert à assurer que la communication entre le manager ASR et l'infrastructure Oracle est toujours opérationnelle. Le manager ASR envoie quotidiennement un heartbeat. Si deux heartbeat consécutifs manquent à l'appel, les assets attachés passent en statut "No heartbeat" dans My Oracle Support (MOS), et un e-mail est envoyé au compte qui a servi à enregistré le manager ASR et aux contacts associés aux assets. La version 4.6 apporte une amélioration significative, dans la mesure ou elle introduit un heartbeat au niveau de l'asset, pour les telemetry sources suivantes : ILOM avec version de firmware 3.2.1.4 ou plus serveurs Fujitsu M-10 Solaris 11 via un Manager ASR relay Cette amélioration renforce la fiabilité de l'outil et mérite vraiment de passer un petit peu de temps pour upgrader le manager ASR en 4.6 (pour upgrader un manager ASR, voir ce billet). Pour connaitre la version actuelle de votre manager ASR : # /opt/SUNWswasr/bin/asr show_version

  Read the article

• Az &eacute;rem m&aacute;sik oldala

  - by peter.nagy

  Az Exalogic kapcsán, ha már valaki hallott róla, akkor leginkább a teljesítmény ugrik be. Mint normálisan majdnem minden szerver megoldás új verziójánál. Nos ez nyilvánvalóan nincs másképp itt sem, amire büszkék is lehetünk. Ugyanakkor nagyon fontos tulajdonsága az Exalogicnak, hogy szinte azonnal hadrafogható. Ez persze már részben elérheto, mivel képesek vagyunk kész virtuális gépeket letölteni komplett telepítéssel. Persze ott még a vasra külön fel kell húzni a virtualizációs szoftvert. Na és itt jönnek a problémák. Bárki aki már látott, csinált, vagy végig nézte egy rendszerhez szükséges infrastruktúra felhúzását az tudja mirol beszélek. A telepítés, megfelelo verziók, szükséges patch-ek, hálózati eszközök bekötése. Aztán mindennek a konfigurálása. A legjobb esetben is napok, de inkább hetek kérdése mire üzemkész lenne. Az Exalogic esetében ez más, hiszen gyárilag összereszelték, a konfiguráció kialakítása gyakorlatilag néhány paraméter file és kész. De lássuk is, hogy mennyi ido onnan, hogy kibontottuk a dobozból. Mindössze egy nap. A hab a tortán pedig a full stack upgrade. Nem külön minden egyes komponenst. Firmware-tol a WebLogic szerverig.

  Read the article

• New article on preventing multiple concurrent use in asp.net

  - by Frez

  I have posted up an article today entitled Preventing a User From Having Multiple Concurrent Sessions

  Read the article

• More Free Apps Bound for the Marketplace

  - by Scott Kuhl

  Microsoft has announced they are raising the limit of free applications a developer can submit from 5 to 100.  But what does that really mean? First, lets look at the reason for the limitation.  The iTunes Store and the Android Market both have a lot more applications available than the Windows Phone Marketplace.  But that says nothing about the quality of those applications.  I attended a couple of pre-launch events and Microsoft representatives were clearly told to send a message. We don’t want a bunch of junky applications that do nothing but spam the marketplace.  That was the reason for the 5 free application limit. Okay, so now what has the result been?  Well, there are still fart apps, but there is no sign of a developer flooding the marking with 1500 wallpaper applications or 1000 of the same application all pointed at different RSS feeds.   On the other hand there are developers who want to release real free apps but are constrained by the 5 app limit. So why did Microsoft change it’s mind?  Is it to get the count of applications up, or is to make developers happy?  Windows Phone Marketplace is growing fast but it’s a long way behind the other guys.   I don’t think Microsoft wants to have 100,000 apps show up in the next 3 months if they are loaded with copy cat apps.  Those numbers will get picked apart quickly and the press will start complaining about  the same problems the Android Market has.  I do think the bump was at developer request.  Microsoft is usually good about listening to developer feedback, but has been pretty slow about it at times.  And from a financial perspective, there will me more apps that Microsoft has to review that they will see no profit on.  At least not until they bake in a advertising model connected to Bing. Ultimately, what does this mean for the future? Well, there are developers out there looking to release more than 5 simple free apps, so I think we will see more hobby apps.  And there are developers out there trying to make money from advertising instead of sales, so I think we will see more of those also.  But the category that I think will grow the fastest is free versions of paid applications that are the same as the trial version of the application.  While technically that makes no sense, its purely a marketing move.  Free apps get downloaded a lot more than paid apps, even with a trial mode.  It always surprises me how little consumers are willing to spend on mobile apps.  How many reviews of applications have you seen that says something like “a bit pricey at $1.99”.  Really?  Have you looked at how much you spend on your phone and plan?  I always thought the trial mode baked into Windows Marketplace was a good idea.  So I’m not sure how the more open free market will play out. In the long run though, I won’t be surprised to see a Bing ad mobile ad model show up so Microsoft can capitalize on the more open and free Windows Marketplace. Bonus: The Oatmeal on How I Feel About Buying Apps

  Read the article

• Oracle Sequences

  - by jkrebsbach

  Reminder to myself - SQL Server has nice index columns directly tied to their tables. Oracle has sequences that are islands to themselves. select seq_name.currval from dual; select seq_name.nextval from dual; currval - return current number at top of sequence nextval - increment sequence by 1, return new number   therefore - to create functionality in oracle similar to an index column - OPTION A) - Create insert trigger: CREATE OR REPLACE TRIGGER dept_bir BEFORE INSERT ON departments FOR EACH ROW WHEN (new.id IS NULL) BEGIN SELECT dept_seq.NEXTVAL INTO :new.id FROM dual; END; This will handle creating a unique identity, but will not necessarily inform process flow of identity without additional logic. OPTION B) - Select indentity into temp variable, insert whole item into tab **** When attemptint to query currval, the below error was being thrown - SELECT seq_name.currval from dual; ERROR : TABLE OR VIEW DOES NOT EXIST *** Although Oracle sys tables may have access to the sequences, that isn't to say the Oracle user may have access to those sequences - verify permissions when the system can't see object that are being reported in the object explorer.

  Read the article

• UppercuT v1.0 and 1.1&ndash;Linux (Mono), Multi-targeting, SemVer, Nitriq and Obfuscation, oh my!

  - by Robz / Fervent Coder

  Recently UppercuT (UC) quietly released version 1 (in August). I’m pretty happy with where we are, although I think it’s a few months later than I originally planned. I’m glad I held it back, it gave me some more time to think about some things a little more and also the opportunity to receive a patch for running builds with UC on Linux. We also released v1.1 very recently (December). UppercuT v1 Builds On Linux Perhaps the most significant changes to UC going v1 is that it now supports builds on Linux using Mono! This is thanks mostly to Svein Ackenhausen for the patches and working with me on getting it all working while not breaking the windows builds!  This means you can use mono on Windows or Linux. Notice the shell files to execute with Linux that come as part of UC now. Multi-Targeting Perhaps one of the hardest things to do that requires an automated build is multi-targeting. At v1 this is early, and possibly prone to some issues, but available.  We believe in making everything stupid simple, so it’s as simple as adding a comma to the microsoft.framework property. i.e. “net-3.5, net-4.0” to suddenly produce both framework builds. When you build, this is what you get (if you meet each framework’s requirements): At this time you have to let UC override the build location (as it does by default) or this will not work.  Semantic Versioning By now many of you have been using UppercuT for awhile and have watched how we have done versioning. Many of you who use git already know we put the revision hash in the informational/product version as the last octet. At v1, UppercuT has adopted the semantic versioning scheme. What does that mean? This is a short read, but a good one: http://SemVer.org SemVer (Semantic Versioning) is really using versioning what it was meant for. You have three octets. Major.Minor.Patch as in 1.1.0.  UC will use three different versioning concepts, one for the assembly version, one for the file version, and one for the product version. All versions - The first three octects of the version are owned by SemVer. Major.Minor.Patch i.e.: 1.1.0 Assembly Version - The assembly version would much closer follow SemVer. Last digit is always 0. Major.Minor.Patch.0 i.e: 1.1.0.0 File Version - The file version occupies the build number as the last digit. Major.Minor.Patch.Build i.e.: 1.1.0.2650 Product/Informational Version - The last octect of your product/informational version is the source control revision/hash. Major.Minor.Patch.RevisionOrHash i.e. (TFS/SVN): 1.1.0.235 i.e. (Git/HG): 1.1.0.a45ace4346adef0 SemVer is not on by default, the passive versioning scheme is still in effect. Notice that version.use_semanticversioning has been added to the UppercuT.config file (and version.patch in support of the third octet): Gems Support Gems support was added at v1. This will probably be deprecated as some point once there is an announced sunset for Nu v1. Application gems may keep it around since there is no alternative for that yet though (CoApp would be a possible replacement). Nitriq Support Nitriq is a code analysis tool like NDepend. It’s built by Mr. Jon von Gillern. It uses LINQ query language, so you can use a familiar idiom when analyzing your code base. It’s a pretty awesome tool that has a free version for those looking to do code analysis! To use Nitriq with UC, you are going to need the console edition.  To take advantage of Nitriq, you just need to update the location of Nitriq in the config: Then add the nitriq project files at the root of your source. Please refer to the Nitriq documentation on how these are created. UppercuT v1.1 Obfuscation One thing I started looking into was an easy way to obfuscate my code. I came across EazFuscator, which is both free and awesome. Plus the GUI for it is super simple to use. How do you make obfuscation even easier? Make it a convention and a configurable property in the UC config file! And the code gets obfuscated! Closing Definitely get out and look at the new release. It contains lots of chocolaty (sp?) goodness. And remember, the upgrade path is almost as simple as drag and drop!

  Read the article

• Adding an LOV to a query parameter (executeWithParams)

  - by shay.shmeltzer

  I showed in the past how you can use the executeWithParams operation to build your own query page to filter a view object to show specific rows. I also showed how you can make the parameter fields display as drop down lists of values (selectOneChoice). However this week someone asked me if you can have those parameter fields use the advanced LOV component. Well if you just try and drag the parameter over, you'll see that the LOV option is not there as a drop option. But with a little bit of hacking around you can achieve this. (without actual Java coding). Here is a quick demo:

  Read the article

• Hands On Workshop "APEX Mobile": Sommer 2013

  - by Carsten Czarski

  Anwendungen für Mobile Endgeräte sind derzeit in aller Munde - nahezu überall taucht die Anforderung "Unterstützung von Smartphones oder Tablets" auf. Wie die meisten wissen, werden mobile Endgeräte mit der aktuellen APEX Version 4.2 out-of-the-box unterstützt. Und mobile Anwendungen werden in typischer APEX-Manier schnell und einfach erstellt. Wie einfach das geht, können Sie nicht nur mit dem neuen Workshop Guide: APEX-Anwendungen für mobile Endgeräte selbst nachvollziehen, sondern auch in einem der APEX Mobile Hands On Workshops 'LIVE' erleben. Dort erfahren Sie ... Wie man eine APEX-Anwendung, basierend auf Tabellen erstellt APEX Komponenten wie Formulare, Berichte, Diagramme oder Kalender einbindet Wie man auf das GPS in einem Smartphone zugreift, die Koordinaten in der Datenbank speichern und damit arbeiten kann Wie man auf die Kamera zugreift, die Bilder speichert und einfache Bildoperationen durchführen kann Und vieles mehr ... Darüber hinaus ist natürlich auch Zeit für den Austausch und zur Diskussion vorgesehen. Details zu Agenda, Terminen und Workshop-Voraussetzungen finden Sie auf der Webseite. Die Teilnahme an der Veranstaltung ist kostenlos - melden Sie sich am besten gleich an.

  Read the article

• EXALYTICS - If Oracle BI Server Does Not Fail Over to the TimesTen Instance

  - by Ahmed Awan

  If the BI Server does not fail over to the second TimesTen instance on the scaled-out node, then ensure that the logical table source (LTS) for the repository has mapped both TimesTen physical data sources. This mapping ensures that at the logical table source level, a mapping exists to both TimesTen instances. If one TimesTen instance is not available, then failover logic for the BI Server at the DSN level tries to connect to the other TimesTen instance. Reference: http://docs.oracle.com/cd/E23943_01/bi.1111/e24706/toc.htm

  Read the article

• Sabre Manages Fast Data Growth with Oracle Data Integration Products

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Last year at OpenWorld we announced Sabre Holding as a winner of the Fusion Middleware Innovation Awards. The Sabre team did an excellent job at leveraging cutting edge technologies for managing rapid data growth and exponential scalability demands they have experienced in the travel industry. Today we announced the details and specific benefits of Sabre’s new real-time data integration solution in a press release. Please take a look if you haven’t seen it yet. Sabre Holdings Deploys Oracle Data Integrator and Oracle GoldenGate to Support Rapid Customer Growth There are 3 different areas of benefits Sabre achieved by using Oracle Data Integration products: Manages 7X increase in data sources for the enterprise data warehouse Reduced infrastructure complexity Decreased time to market for new products and services by 30 percent. This simply shows that using latest technologies helps the companies to innovate robust solutions against today’s key data management challenges. And the benefit of using a next generation data integration technology is not only seen in the IT operations, but also in the business side. A better data integration solution for the enterprise data warehouse delivered the platform they need to accelerate how they service their customers, improving their competitive advantage. Tomorrow I will give another great example of innovation with next generation data integration from Oracle. We will be discussing the Fusion Middleware Innovation Awards 2012 winners and their results with using Oracle’s data integration products.

  Read the article

• Disneyland Inside Out on iPhone and Android

  - by Ryan Cain

  It's hard to believe October was the last time I was over here on my blog.  Ironically after getter the developer phone from Microsoft I have been knee deep in iPhone programming and for the past few weeks Android programming again.  This time I've spent all my non-working hours programming a fun project for my "other" website, Disneyland Inside Out.  Disneyland Inside Out, a vacation planning site for Disneyland in California, has been around in various forms since June 1996.  It has always been a place for me to explore new technologies and learn about some of the new trends on the web.  I recently migrated the site over to DotNetNuke and have been building out custom modules for DNN.  I've also been hacking things together w/ the URLRewrite module in IIS 7.5 to provide strong SEO optimized URLs.  I can't say all that has really stuck within the DNN model of doing things, but it has worked pretty well. As part of my learning process, I spent most of the Fall bringing Disneyland Inside Out to the iPhone.  I will post more details on my development experiences later.  But this project gave me a really great opportunity to get a good feel for Objective-C development.  After 3 months I actually feel somewhat competent in the language and iPhone SDK, instead of just floundering around getting things to work.  The project also gave me a chance to play with some new frameworks on the iPhone and really dig into the Facebook SDK.  I also dug into some of the Gowalla REST api's as well.  We've been live with the app in iTunes for just about 10 days now, and have been sitting in the top 200 of free travel apps for the past few days.  You can get more info and the direct iTunes download link on our site: Disneyland Inside Out for iPhone Since launching the iPhone version I have gotten back into Android development, porting the Disneyland Inside Out app over to Android.  As I said in my first review of iPhone vs. Android, coming from a managed code background, Android is much easier to get going with.  I just about 3 weeks total I will have about 85 - 90% of the functionality up and running in the Android app, that took probably 1.5 - 2x's that time for iPhone.  That isn't a totally fair comparison as I am much more comfortable w/ Xcode and Objective-C today and can get some of the basic stuff done much faster than I could in the fall.  Though I'd say some of the hardest code to debug is still the null pointer issues on objects that were dealloc'd too early in Objective-C.  This isn't too bad with the NSZoombies enabled for synchronous code, but when you have a lot of async, which my app does, it can be hairy at times to track exactly what was causing the issue.   I will post more details later, as I am trying to wrap up a beta of the Android app today.  But in the meantime, if you have an iPhone, iPod Touch or iPad head on over to the site and take a look at my app.

  Read the article

• Register now for the UK Windows Azure Self-paced Interactive Learning Course starting May 10th

  - by Eric Nelson

  [Suggested twitter tag #selfpacedazure] We (myself and David Gristwood) have been working in the UK to create a fantastic opportunity to get yourself up to speed on the Windows Azure Platform over a 6 week period starting May 10th – without ever needing to leave the comfort of your home/office.  The course is derived from the internal training Microsoft gives on Azure which is both fun and challenging in equal parts – and we felt was just too good to keep to ourselves! We will be releasing more details nearer the date but hopefully the following is enough to convince you to register and … recommend it to a colleague or three :-) What we have produced is the “Microsoft Azure Self-paced Learning Course”. This is a free, interactive, self-paced, technical training course covering the Windows Azure platform – Windows Azure, SQL Azure and the Azure AppFabric. The course takes place over a six week period finishing on June 18th. During the course you will work from your own home or workplace, and get involved via interactive Live Meetings session, watch on-line videos, work through hands-on labs and research and complete weekly coursework assignments. The mentors and other attendees on the course will help you in your research and learning, and there are weekly Live Meetings where you can raise questions and interact with them. This is a technical course, aimed at programmers, system designers, and architects who want a solid understanding of the Microsoft Windows Azure platform, hence a prerequisite for this course is at least six months programming in the .NET framework and Visual Studio. Check out the full details of the event or go straight to registration.   The course outline is: Week 1 - Windows Azure Platform Week 2 - Windows Azure Storage Week 3 - Windows Azure Deep Dive and Codename "Dallas" Week 4 - SQL Azure Week 5 - Windows Azure Platform AppFabric Access Control Week 6 - Windows Azure Platform AppFabric Service Bus If you have any questions about the course and its suitability, please email [email protected].

  Read the article

• Android&ndash;Finding your SDK debug certificate MD5 fingerprint using Keytool

  - by Bill Osuch

  I recently upgraded to a new development machine, which means the certificate used to sign my applications during debug changed. Under most circumstances you’ll never notice a difference, but if you’re developing apps using Google’s Maps API you’ll find that your old API key no longer works with the new certificate fingerprint. Google's instructions walk you through retrieving the MD5 fingerprint of your SDK debug certificate - the certificate that you’re probably signing your apps with before publishing, but it doesn't talk much about the Keytool command. The thing to remember is that Keytool is part of Java, not the Android SDK, so you'll never find it searching through your Android and Eclipse directories. Mine is located in C:\Program Files\Java\jdk1.7.0_02\bin so you should find yours somewhere similar. From a command prompt, navigate to this directory and type: keytool -v -list -keystore "C:/Documents and Settings/<user name>/.android/debug.keystore" That’s assuming the path to your debug certificate is in the typical location. If this doesn’t work, you can find out where it’s located in Eclipse by clicking Window –> Preferences –> Android –> Build. There's no need to use the additional commands shown on Google's page. You'll be prompted for a password, just hit enter. The last line shown, Certificate fingerprint, is the key you'll give Google to generate your new Maps API key. Technorati Tags: Android Mapping

  Read the article

• You Don't Want to Meet Orgad Kimchi in a Dark Alley

  - by rickramsey

  source Do you remember what those bad guys in the old Charles Bronson films looked like? They looked like Orgad Kimchi, that's what they looked like. When I met him at Oracle OpenWorld 2012, I realized I didn't want to meet him in the wrong alleyway of Budapest after dark. Neither do old versions of Oracle Solaris, which Orgad bends to his will with as much ease as he probably bends stray tourists to his will in Budapest, Kandahar, or Dagestan. How Orgad Made Oracle Database Migrate from Oracle Solaris 8 to Oracle Solaris 11 In this article, which we liked so much we reprinted it from his blog (please don't tell him!), Orgad explains how he head-butted an Oracle Database into submission. The database thought it was safe running in Oracle Solaris 8, but Orgad dragged its whimpering carcas into Oracle Solaris 11. How'd he do that? Well, if you had met Orgad in person, you wouldn't ask that question. Because you'd know he could have simply stared at it, and the database would have migrated on its own. But Orgad didn't do that. Instead, he stuffed an Oracle Solaris 8 Physical-to-Virtual (P2V) Archiver Tool into his leather trench coat, the one with the special pockets sown in by the East German Secret Police for several Uzis and their ammo, and walked into his data center in a way that reminded the survivors of this clip from Matrix Reloaded. The end result? The Oracle Database 10.2 that was running on Oracle Solaris 8 is now running inside a Solaris 10 branded zone in Oracle Solaris 11. With no complaints. Don't make Orgad angry. Read his article. - Rick Website Newsletter Facebook Twitter

  Read the article

• Removing Menu Items from Window Tabs

  - by Geertjan

  So you're working on your NetBeans Platform application and you notice that when you right-click on tabs in the predefined windows, e.g., the Projects window, you see a long list of popup menus. For whatever the reason is, you decide you don't want those popup menus. You right-click the application and go to the Branding dialog. There you uncheck the checkboxes that are unchecked below: As you can see above, you've removed three features, all of them related to closing the windows in your application. Therefore, "Close" and "Close Group" are now gone from the list of popup menus: But that's not enough. You also don't want the popup menus that relate to maximizing and minimizing the predefined windows, so you uncheck those checkboxes that relate to that: And, hey, now they're gone too: Next, you decide to remove the feature for floating, i.e., undocking the windows from the main window: And now they're gone too: However, even when you uncheck all the remaining checkboxes, as shown here... You're still left with those last few pesky popup menu items that just will not go away no matter what you do: The reason for the above? Those actions are hardcoded into the action list, which is a bug. Until it is fixed, here's a handy workaround: Set an implementation dependency on "Core - Windows" (core.window). That is, set a dependency and then specify that it is an implementation dependency, i.e., that you'll be using an internal class, not one of the official APIs. In one of your existing modules, or in a new one, make sure you have (in addition to the above) a dependency on Lookup API and Window System API. And then, add the class below to the module: import javax.swing.Action; import org.netbeans.core.windows.actions.ActionsFactory; import org.openide.util.lookup.ServiceProvider; import org.openide.windows.Mode; import org.openide.windows.TopComponent; @ServiceProvider(service = ActionsFactory.class) public class EmptyActionsFactory extends ActionsFactory { @Override public Action[] createPopupActions(TopComponent tc, Action[] actions) { return new Action[]{}; } @Override public Action[] createPopupActions(Mode mode, Action[] actions) { return new Action[]{}; } } Hurray. Farewell to superfluous popup menu items on your window tabs. In the screenshot below, the tab of the Projects window is being right-clicked and no popup menu items are shown, which is true for all the other windows, those that are predefined as well as those that you add afterwards:

  Read the article

• JDeveloper and Upgrading Your JDK on Ubuntu

  - by Duncan Mills

  One little gotcha, if you, as I did recently, upgrade your JDK on Ubuntu then you may have to make sure you reflect that change in a couple of places for JDeveloper to stay happy. Assuming that you've installed from the jar version of the JDeveloper installer, then the JDK that you specified at install time will be recorded in the .jdev_jdk file in your home directory.However, be aware that this is not the only reference to the absolute path of the JDK. When you run the embedded WebLogic for the first time then the .jdeveloper/system11.1.1.3.37.56.60/DefaultDomain/bin/startWebLogic.shscript will be created, and associated with that, the setDomainEnv.sh script in the same directory. So, if you do want to change the JDK location be sure to change this file as well. (or of course do everything with symbolic links)

  Read the article

• links worth clicking&hellip;

  - by Chris Williams

  Scanning my Twitter feed almost always proves to be fruitful when looking for cool/interesting links to share. Here are a few of the highlights: I read this blog post from Justin Angel today, pretty interesting stuff: Windows Phone 7 – Unlocked ROMs  Looks like there’s a lot of good stuff floating just under the surface in the latest build of the WP7 Emulator. (Courtesy of @JustinAngel) Next up is this video titled Game Design Tutorials: From Seconds to Hours of Gameplay. If you’re into Indie Game Development, or just like watching videos… this one is pretty short at 5 minutes, but contains some good information about increasing the duration of fun gameplay in your game. (Courtesy of @Kei_tchan) If you are a Firefly (or Castle, or Dr. Horrible’s Singalong Blog) fan, check out this Facebook campaign to get Nathan Fillion to host SNL: http://tinyurl.com/2dh5m67  It worked for Betty White, so why not, right? (Courtesy of @DGalloway42)

  Read the article

• Is Your Corporate Network Secure and Confidential?

  - by Chandra Vennapoosa

  Businesses are increasingly conducted over IT networks and it is imperative for them to maintain network confidentiality more than ever before. A failure to ensure the security of business IT network can lead to dire consequences. In order to secure these network, a number of changes are made to the infrastructure of the underlying network, and a network administrator is designated to create policies which will protect the network from unauthorized access. Read here:  Is Your Corporate Network Secure and Confidential?

  Read the article

• VSDB to SSDT Series : Introduction

  - by Etienne Giust

  At the office, we extensively use VS2010 SQL Server 2008 Database Projects and SQL Server 2008 Server Projects  in our Visual Studio 2010 solutions. With Visual Studio 2012, those types of projects are replaced by the  SQL Server Database Project  using the SSDT (SQL Server Data Tools) technology. I started investigating the shift from Visual Studio 2010 to Visual Studio 2012 and specifically what needs to be done concerning those database projects in terms of painless migration, continuous integration and standalone deployment. I will write my findings in a series of 4 short articles: Part 1 will be about the database projects migration process and the cleaning up that ensues Part 2 will be about creating SQL Server 2008 Server Projects equivalents with the new SSDT project type Part 3 will introduce a replacement to the vsdbcmd.exe command used for deployment in our continuous integration process Part 4 will explain how to create standalone packages of SSDT projects for deployment on non accessible servers (such as a production server)

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >