Search Results

Search found 12753 results on 511 pages for 'small'.

Page 364/511 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

  - by Michael Shick

  I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

  Read the article

• Dell fumbles OpenManage installation process, forgets to write documentation?

  - by bwerks

  Hi all, I'm setting up a Dell PowerEdge 2950 for a small business, and I've just spent a while with Dell OpenManage Server Administrator 6.2, trying to clear the installation process of errors before I execute it. Right now I'm getting the following warning from the installer. The installer has detected that the HTTPS listener is not configured for Windows Remote Management. You can either configure the HTTPS listener before installing Remote Enablement, or install Remote Enablement now by selecting the "Custom" installation screen and configure the HTTPS listener later. See the "Remote Enablement Requirements" section in the "Dell OpenManage Installation and Security User's Guide" for information on configuring the HTTPS listener. Note: Remote Enablement is required to manage this system from a remote Server Administrator Web Server and is applicable only for those systems that support Server Instrumentation. Click here to configure HTTPs Listener for Windows Remote Management. The italicized line is a link, which executes...something...via cmd, and doesn't seem to help the problem. Not knowing exactly what to do here, I consulted the documentation. I read through the Setup and Administration section of the User's Guide, but all that it contained was a weird primer on role-based security and some SNMP stuff. The next section skips installation entirely and moved on to features of the suite. Thinking myself crazy, I consulted the readme, which told me that for installation I should consult the "Dell OpenManage Installation and Security Version 6.2 User's Guide" which not only doesn't exist in the documentation, but also not in all of google? Soo yeah, if anyone is familiar with this problem, drop me some knowledge!

  Read the article

• Accidentally mounted a ReiserFS drive as MBR on my windows box - how do I recover?

  - by Ryan

  I had a WD Netcenter with a 160GB drive that kept dropping off the network. I opened up the enclosure and removed the hard drive, connected to a Windows box without knowing the drive used ReiserFS.... When mounting on the Windows box, I chose "MBR" as filesystem. 70GB of data corrupted: 90% of data is word documents, excel spreadsheets, and jpg's - all mission critical. Attempted recovery on Linux box (ubuntu) using TestDisk: I could see the container, but couldn't get anything out – according to TestDisk this was because I chose "none" as filesystem. Attempted recovery using Nucleus Kernel Recovery for windows: 98% of what was recovered is incomplete and/or unusable. I need to know if a way exists to recover or rebuild original ReiserFS MBR, or what tools/techniques might give me the best results in recovering the data. Found a Windows version of TestDisk and I ran it yesterday - here are the results: TestDisk 6.14-WIP, Data Recovery Utility, May 2012 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 160 GB / 149 GiB - CHS 19457 255 63 The harddisk (160 GB / 149 GiB) seems too small! (< 519 GB / 483 GiB) Check the harddisk size: HD jumpers settings, BIOS detection... The following partitions can't be recovered: Partition Start End Size in sectors > ReiserFS 3.6 62 241 8 19458 0 18 311581568 ReiserFS 3.6 62 248 55 19458 8 2 311581568 ReiserFS 3.6 62 254 37 19458 13 47 311581568 ReiserFS 3.6 63 6 28 19458 20 38 311581568 ReiserFS 3.6 63 13 11 19458 27 21 311581568 ReiserFS 3.6 63 21 43 19458 35 53 311581568 ReiserFS 3.6 63 27 41 19458 41 51 311581568 ReiserFS 3.6 63 37 35 19458 51 45 311581568 ReiserFS 3.6 63 54 20 19458 68 30 311581568 ReiserFS 3.6 63 76 26 19458 90 36 311581568

  Read the article

• Font for Wine that supports the entire character set of the Win32 Console?

  - by Brian Campbell

  I would like to be able to display in the Wine console all characters that the Win32 console can display. I've written a small test program to print out all 8-bit characters: #include <stdio.h> int main(int argc, char *argv[]) { int i, j; for (i = 0; i <= 0xF0; i+=0x10) { for (j = i; j <= i + 0x0F; ++j) printf("%2x:%c", j, (char)j); printf("\n"); } getchar(); return 0; } Under Wine, the best I can do so far is using Andale Mono: While this is what I see on Windows Server 2008: Is there anywhere I can legally download a font that will allow me to view all of those characters under Wine? edit I've found a set of DOS fonts that includes a CP437 font, which should cover the character set I'm interested in. However, even if I install this font, wineconsole doesn't seem to recognize it. Is there any way I can get wineconsole to use this font, or convert this font to a format that wineconsole can use? Or is there any way I can extract fonts from DOSEMU for use in Wine? Oh, and I should probably mention that I'm on Mac OS X 10.6.2, installing Wine via MacPorts, using the wine-devel package. more information I have tried installing some console fonts that should cover the full character set as Mac OS X fonts (such as the NewDOS font listed above, and a font I tried converting from the fonts supplied by DOSEMU). Wine does not seem to pick up on new fonts installed in Mac OS X. Is there a way to register new fonts I've installed with Wine? Would manually editing the system.reg file that seems to contain font mappings work, or is there something else I'd need to do? bump Bounty ends soon, I'm still looking for an answer for this. Does anyone use the Wine console for complex text user interfaces?

  Read the article

• Getting started with webserver clustering.

  - by Ernie

  I work for a small ISP, and we host about 250 domains and all the stuff that goes along with that: DNS, mail, spam filtering, and backups. Currently, we have separate DNS servers (two of them) and mail servers (outgoing mail is actually on the secondary DNS server, but was previously on its own server). In the past, this was done as an insurance measure. The last thing we need is for some doofus (usually yours truly) to hose a server, taking out DNS and mail right along with it, or for spammers to jam our incoming SMTP server, preventing outgoing mail from being sent too. In the past, this was a problem, and our servers were set up the way they are now to combat it. However, clustering solutions like Sun's Cobalt RAQ (in days of olde) and Virtualmin appear to cater to an all-in-one approach, then deal with failures through redundant servers. I have avoided this thus far, but we've been using Virtualmin on our web server for a while now, and I'd like to expand into using it for a high availability cluster. Our networking partner has recently built a datacenter that has eliminated all of our other bugaboos like network, cooling, and power issues, so now the only thing left to go wrong is me hosing a server, which happened earlier this month. One of the bigger reasons we've avoided going this route is because our hardware requirements aren't particularly high. One server easily handles all the sites we host (most of them are flat sites). Also, load-balancing routers tend to be expensive and complicated. All that I'm really expecting to do is building a two-node cluster for redundancy so that when I hose a server (however rare that might be), we're not out for 8-12 hours while I rebuild it. What I need to know is how to get started, and if I'm really in a position to bother with this kind of thing at all.

  Read the article

• Huge host CPU usage in idle vmware guest. Ubuntu 10.04 host, Vista SP2 guest

  - by themesandmodules

  I'm experiencing huge host CPU usage with an idle vmware guest. Host: Ubuntu 10.04 32-bit 2.6.32-24-generic-pae. (Very new install, i.e 24 hours ago) Hardware is Dell XPS M1530 laptop, 4GB ram. Intel Core II Duo T9300 2.50Ghz The virtualization setting "VT" or something is enabled in my bios. Guest: Completely fresh install of Windows Vista, upgraded to latest SP2 and all windows updates installed. 1024 - 1512MB ram allocated. Absolutely no other software installed on it, apart from VMWare tools. Situation When the guest is doing absolutely nothing, I watch with sysinternals process watch on the guest. This shows that system idle process is between 70 and 99%, usually around 95%. No actual process doing anything. On the host, I watch with top, I get cpu usage of 20% - 80%, usually around 30%. What I have tried Single and Dual processor available to guest - no change. Turn off all peripherals to guest - no network, drives, usb etc - no change. Turn off 3d acceleration for guest - perhaps a small improvement, or no change. Upping allocated ram to guest from 1024MB to 1512MB - no change. Yelling at vmware - no change. I have experienced a similar issue in the past, which was solved by setting the guest to have 1 CPU. This time that hasn't worked.

  Read the article

• Please advise on VPS config choice (with SQL Server Express)

  - by tjeuten

  Hi all, I might be interested in getting a VPS hosting plan for some small personal sites and .NET projects. Was thinking of Softsys Bronze Plan, as my current shared host plan is with them too. The stuff I want to host has grown beyond the capabilities of a Shared hosting plan, and I also want more control over the IIS/ASP.NET configuration, that's why I'm considering VPS. The main config details would be: Hyper-V 30 GB of diskspace 1 GB of RAM More info here: http://www.softsyshosting.com/Windows-VPS-HyperV.aspx Does anyone have experience with this plan (or something similar from another host), and maybe could answer these couple of questions: Bronze has a total diskspace of 30GB. Is the OS part of this quota or not ? If so, how much does a base configuration with Windows 2008 take up in diskspace ? Would you advise Windows 2008 R2 or Normal. Or would you advise to use Windows 2003 with this config. I'm planning on running a SQL Server Express install too. Would 1 GB of RAM be enough for both the Windows 2008 (R2) and SQL Express. The database load will not be that very high (a couple of 1000 records returned each day). The DB will most likely be far away from the 4GB limit, that's why I'd go for a SQL Express instead of paying extra licensing costs for a SQL Web install. But I'm more concerned about performance. Would you recommend Softsys as a VPS host ? I've been with them for one year for my Shared hosting plan, and have no complaints so far. Also, as I have no VPS experience, what are the pitfalls I need to be aware of, in terms of performance mainly, but maybe in other areas too ? Mathieu

  Read the article

• Batch deletion of smaller files from group of files via unix command line

  - by artlung

  I have a large number (more than 400) of directories full of photos. What I want to do is to keep the larger sizes of these photos. Each directory has 31 to 66 files in it. Each directory has thumbnails, and larger versions, plus a file called example.jpg I dispatched the example.jpg file easily with: rm */example.jpg I initially thought that it would be easy to delete the thumbnails, but the problem is they are not consistently named. The typical pattern was photo1.jpg and photo1s.jpg. I did rm */photo*s.jpg but it ended up some of the files named photoXs.jpg were actually larger and not smaller. Argh. So what I want to do is scan each directory for filesize and delete (or move) the thumbnails. I initially thought I'd just ls -R every file and extract the size of each file and save those under a threshold. The problem? In one directory the large will be 1.1 MB and the thumb is 200k. In another the large is 200k and the small 30k. Even worse, the files really are mostly named photo1.jpg - so simply putting them all in the same folder, sorting by size, and deleting in groups would not work without renaming already, and if it's possible I'd prefer to keep them in their folders. I was almost resolved to just doing this all manually, but then thought I'd ask here. How would you do this task?

  Read the article

• PostgreSQL failover cluster on Windows Server

  - by user36997

  We are looking for advice on how to setup a basic failover cluster for our application: We will be using 4 machines running Microsoft Windows Server (most probably 2003). All four will always run our application, which is essentially a web service. Load balancing is "outsourced" - somebody else handles the distribution of the web requests among the servers. Only one of the servers will be running the PostgreSQL server actively at any given time. Another server (of the four) also has the DB installed, but is on standby/passive. The DB data is stored on shared storage. No copying data between servers. Reads are done very frequently by many end-users, and in rather small chunks of data. Writes are done much less frequently, by less users, and in very large bulks of data. Now, how can one configure Microsoft Cluster Service to keep only one instance of the DB server and 4 instances (1 per server) of our application at all times? And does PostgreSQL integrate neatly with MSCS at all? Update: Instead of keeping the data on shared storage, I also consider using log shipping to replicate data on a couple of DB servers. There are two issues with this option: Log shipping only makes sure that I have a second server that gets all of the data and is ready to take over. How do I implement the actual failure detection and failover switch? Switching back: Suppose the master fails and the system automatically fails over to the slave, and later the master comes back online. I understand that with WAL shipping this will require to reconfigure the log shipping once again, and that switching back is far from seamless. Is that so?

  Read the article

• Moving Farm to co-location hosting - network settings requirements

  - by Saariko

  I am moving my farm (2 Dell's R620) to a co-location hosting service. I am trying to figure out the secure way to have my network settings The requirements are: VM1 is the working HOST, includes: esxi 5.1, vSphere, 4 clients (w2008r2 all) VM2 has esxi 5.1 installed, and a single machine with Veeam Backup and copy 6.5 - keeping a copy of VM1 clients on the VM2 internal storage (this solution is due to a very small budget - in case of failure on Host 1 - can redirect IP's) Only 2 VM clients require network address and access from the WWAN - ISP provides IP's range for them (with Gateway and DNS) I need connection to the iDrac's from my office (option to create a VPN-SSL tunnel) Connection to the vSphere appliances I want to be able to RDP to the VM clients The current configuration is that each host has the iDrac dedicated nic connected , and another (NIC #1) connected - with a static IP on 192.168.3.x The iDrac's have a static IP from the same network range (19.168.3.x) It will look something like this: My thoughts: On NIC#2 of both hosts I will connected a crossed cable I will give each VM clients that needs internet access a 2ndry VM network with the assigned IP from the ISP open only to web - can not access from the My Question: Should I give IP's (external) to the machines who DO NOT require WWAN Access? - I can't see a way to RDP to them directly if not. Should I use the crossed cable? or just plug NIC #2 to the switch? Will this setup even work? What do I need to verify? What Virtual nic's and/or switches should I create on the Hosts?

  Read the article

• Datacenter IP Addressing and DNS Management

  - by user65248

  Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• Robocopy launches and then hangs/just sits there

  - by NateO

  I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

  Read the article

• Formatting a a memory stick with two partitions?

  - by Marius

  I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. So, to summarize: I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.

  Read the article

• Name resolution not working with ipv6 on centos

  - by jolivier

  I just installed CentOs 6.3 on a server to be installed in a data center, but cannot get name resolution / curl to work. I know this is because of it trying to use ipv6, since ping google.com works, curl -4 google.com works, but not curl google.com. I removed the ipv6 adress from the interface and it does not change anything. This is very problematic since most system tools like yum fail at name resolution currently. Browsers like Firefox work because they might be using another tool for name resolution than the one use by curl. I managed to fix this on workstations by completely disabling ipv6 following tutorials like this one / hardcoding name resolution in /etc/hosts. But since I am here configuring a server which will be later installed in a remote data center, I would like not to mess up, understand what is going on and fix it properly. Besides, I will face the same issue with more servers to come so I would really appreciate your help in understanding this problem and how to solve it. I would be happy to provide more information if needed to help understand what is going on. The current network configuration is a small enterprise network, with a DNS server (let's call it A) configured once a long time ago. dig google.com and dig -4 google.com are both refused by the A DNS. But this is also true for my workstation on which curl is working (and yes they both use the same A DNS server). Indeed this faulty server and my workstation have multiple nameservers in /etc/resolv.conf, and the second one is working fine for both of them, so if I remove A from my resolv.conf everything works fine! Regards, Olivier

  Read the article

• Join mp4 files in linux

  - by Jose Armando

  I want to join two mp4 files to create a single one. The video streams are encoded in h264 and the audio in aac. I can not re-encode the videos to another format due to computational reasons. Also, I cannot use any gui programs, all processing must be performed with linux command line utilities. FFmpeg cannot do this for mpeg4 files so instead I used MP4Box e.g. MP4Box -add video1.mp4 -cat video2.mp4 newvideo.mp4 unfortunately the audio gets all mixed up. I thought that the problem was that the audio was in aac so I transcoded it in mp3 and used again MP4Box. In this case the audio is fine for the first half of newvideo.mp4 (corresponding to video1.mp4) but then their is no audio and I cannot navigate in the video also. My next thought was that the audio and video streams had some small discrepancies in their lengths that I should fix. So for each input video I splitted the video and audio streams and then joined them with the -shortest option in ffmpeg. thus for the first video I ran avconv -y -i video1.mp4 -c copy -map 0:0 videostream1.mp4 avconv -y -i video1.mp4 -c copy -map 0:1 audiostream1.m4a avconv -y -i videostream1.mp4 -i audiostream1.m4a -c copy -shortest video1_aligned.mp4 similarly for the second video and then used MP4Box as previously. Unfortunately this didn't work either. The only success I had was when I joined the video streams separetely (i.e. videostream1.mp4 and videostream2.mp4) and the audio streams (i.e. audiostream1.m4a and audiostream2.m4a) and then joined the video and audio in a final file. However, the synchronization is lost for the second half of the video. Concretelly, there is a 1 sec delay of audio and video. Any suggestions are really welcome.

  Read the article

• copying an lvm partition to a smaller disk, and renaming volume groups.

  - by dlamblin

  I was trying to shrink a vmdk (VMWare disk image) file to be as small as possible, and found two recommendations. The first is to cat /dev/zero into the fs then delete it, and run VMWare tools' shrink. This works okay. The second is to copy everything into a new vmdk. I went the second route. I did not use dd because I actaully want to use as few blocks as possible, instead of having a block-by-clok copy. Any unlinked files will still have blocks that aren't zeroed out. Secondly the centos image was mostly lvm, except for the boot partition, and my target was going to be 4gb instead of 8gb. I did use dd for the first 40mb to get the boot blocks and partition copied. I then used parted to create an identical primary boot, and smaller primary lvm. Then I used pvcreate on that device sdb2, vgcreate, and lvcreate to create a root and swap. I used mkfs.ext3fs on the root partition and then rsync -av / /2root excluding /proc /sys /2root /dev. So far everything went fine. My problem is that: The result is 2.7 GB while the source was 2.1 GB. This is weird to me. The second vgroup is called VolGroup01, while the original was called VolGroup00. How can I rename the VolGroup01 to VolGroup00 and swap it out after all this?

  Read the article

• Default Gateway solution on NAT'd network (best options)

  - by kwiksand

  I've recently changed a network from a bunch of machines exposed to the net on a network to a more security conscious Firewall-fronted network with a DMZ for public services. Everything's mostly working perfectly now, but I've got the old problem of NAT Loopback where a machine within the LAN wants to access a public service via the public/external IP. I've solved this problem previously in a small/SOHO environment simply using NAT loopback features of the router in use or a simple iptables rule to do the same, but I want to make sure I make the most resilient choice with the least concern. It seems I can: Use iptables as I've said to DNAT and MASQUERADE the change source/destination so the connection works correctly i.e iptables -A PREROUTING -t nat -d ip.of.eth0.here -p tcp --dport 8080 -j DNAT --to 192.168.0.201:8080 iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp --dport 8080 -d 192.168.0.201 -j MASQUERADE Use split DNS, with internal mappings for public IP's Potentially do some route nastyness by setting the Default Gateway to use a different externally exposed IP to then come back in the public route (messy) Someone mentioned putting the Default Gateway within the DMZ as well (on serverfault), but I can't find the post again. I'm sure this is a common issue for many with NAT'd networks, but I've not really seen the perfect solve all when it comes to fixing this problem. What is your opinion?

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• VMWare Newbie - looking for hardware recommendations and help :) [closed]

  - by Dan

  I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

  Read the article

• Two hosted servers, one public - VPN?

  - by Aquitaine

  Hello there, Web developer here who has to occasionally wear a system & network admin hat (small company). We currently have a single hosted server running Windows Server 2003 that runs both our web server (IIS/Coldfusion) and our database server (SQL Server 2008). We lock down the SQL server by allowing only specific IPs to connect to it. Not ideal but it's worked thus far. We're moving up to two distinct servers and I want to take the opportunity to 'get things right' and make only the web server face the public. What I need to be able to do is to allow only a handful of people to connect to the database server. Rather than using an IP allow list, I'd prefer to use a VPN to let people through so that access is based on the user and not simply the user's location. I'm leaning toward something like OpenVPN, just so I can stick with Server 2008 Web edition. Do I: Use the web server as a VPN server and set up the database server to only accept connections from the web server? Is there an extra step required to make connections to, say, db.mycompany.com route through the VPN rather than through a different connection? I'm ignorant of this part of network infrastructure stuff. Or, Set up a VPN server on the database server as the only public-facing server connection so that there aren't any routing issues to deal with? I know this is Network 101 stuff but I thought I'd ask before just blundering through it since it could affect the company a bit. Thanks very much!

  Read the article

• Why should one have a secondary DNS server?

  - by Sam Levin

  I'm very confused. I basically understand how DNS works. Here's an example that helps illustrate what I'm having trouble understanding. Right now, I run a small web-server. I use my provider's DNS manager, so I don't have a DNS server hosted on the machine. Let's say for a second, that I don't use my host's DNS, and I decide to set up a DNS server on my server. Hypothetical scenario: my server (entire) server goes down - DNS included. Why do I need backup DNS? If the server is down, who cares if the DNS server is down too, considering that even if I had DNS up (it wasn't on the crashed server), it wouldn't be able to forward requests anyway since the server would be down? Is the point of having secondary DNS, to be able to change the IP addresses that your DNS server points to, so if your webserver was down, you could redirect traffic to a backup? How would you switch to the secondary provider, in the event that your main DNS provider becomes unavailable? Is a backup DNS system basically up all the time? How is it configured? Is it just an exact clone of the DNS server you would have on your server? Do they run simultaneously? Hopefully someone can see what I'm hung up on, and provide some guidance. Thanks

  Read the article

• Conky starts above windows in Ubuntu Maverick

  - by DesertIvy

  Hey guys, I did not run into this problem until I upgraded my Ubuntu box to Maverick Meerkat (10.10). Basically, whenever I start my computer, conky runs as expected, except it gets drawn over any windows that I load (see screenshot). To fix this for a single session, I simply restart conky by running killall conky; conky in a terminal. Conky gets re-drawn below active windows (namely, only appearing on my desktop), and does not have the border/drop-shadow, but I have to do this every time I start a new session. Is there a simple way to fix this? I have a small shell script that I run on startup, but it does not seem to solve the problem. #!/bin/bash sleep 10 && conky; sleep 5 && killall conky; conky; Below is the non-text part of my .conkyrc file. # Conky settings # background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale yes double_buffer yes no_buffers yes text_buffer_size 2048 #imlib_cache_size 0 temperature_unit fahrenheit # Window specifications # own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 minimum_size 200 250 maximum_width 200 alignment tr gap_x 220 gap_y 280 # Graphics settings # draw_shades no draw_outline no draw_borders no draw_graph_borders no # Text settings # use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no temperature_unit celsius default_color FFFFFF # Lua Load # lua_load ~/.lua/scripts/clock_rings.lua lua_draw_hook_pre clock_rings

  Read the article

• Win7 - Some pinned program's icons are corrupt, show default

  - by Andrew Backer

  I have both FF 3.6 & Chrome pinned to my taskbar in win7. The icons for these two programs show up as the ugly default icon from yesteryear. Strange. Is there some way to force an icon refresh for pinned programs? When I first added them they showed properly, but several days later they reverted to this state Un-pinning the program causes the icon to show up properly, and re-pinning it causes it to break again. These other proggies show up fine: Media Center, Media Player Classic HC, Hulu Desktop, WMP, and the folders. I have 2 user accounts on this box, and both are showing this behavior. I have tried changing the taskbar icon size to 'small' and back, but to no effect. Edit (Add) The icons show up as broken in the start menu too, but I can navigate to the EXE directly. When I click "change icon" in the properties for the start menu entry I get the error : Can not find %ProgramFiles%\Google\Chrome...\chrome.exe.

  Read the article

• Which server software and configuration to retrieve from multiple POP servers, routing by address to correct user

  - by rolinger

  I am setting up a small email server on a Debian machine, which needs to pick up mail from a variety of POP servers and figure out who to send it to from the address, but I'm not clear what software will do what I need, although it seems like a very simple question! For example, I have 2 users, Alice and Bob. Any email to [email protected] ([email protected] etc) should go to Alice, all other mail to domain.example.com should go to Bob. Any email to [email protected] should go to Bob, and [email protected] should go to Alice Anything to *@bobs.place.com should go to Bob And so on... The idea is to pull together a load of mail addresses that have built up over the years and present them all as a single mailbox for Bob and another one for Alice. I'm expecting something like Postfix + Dovecot + Amavis + Spamassassin + Squirrelmail to fit the bill, but I'm not sure where the above comes in, can Postfix deal with it as a set of defined regular expressions, or is it a job for Amavis, or something else entirely? Do I need fetchmail in this mix, or is its role now included in one of the other components above. I think of it as content-filtering, but everything I read about content-filtering is focussed on detecting spam rather than routing email.

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >