Search Results

Search found 11621 results on 465 pages for 'html5 video'.

Page 367/465 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

  • Sharing RAM resources between 2 or more computers

    - by davee44
    I know there was a somewhat similar question before: How to share CPU or RAM? But, let me just specify it a little more... When Microsoft Windows requires more RAM capacity than available it uses a swap-file to temporarily store the data there, this is actually something like a hard-drive-based RAM. This technology is used for many years. Theoretically, it shouldn't be too hard to implement a similar technology that uses the RAM of different computer(s) in the network for temporary data storage. This just requires a software that runs on computers in the network that accepts and returns data from/to the main computer and keep that data in the RAM; plus the operation system of the main computer must have the ability to use computers in the network instead of (or in addition to) the swap-file. I wonder, are there any implementations of this idea? This would allow users to build RAM clusters using all of their home or office computers, that will boost the performance of a single computer for some development/gaming/video tasks, etc.

    Read the article

  • GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

    - by Tendou Kishi
    This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

    Read the article

  • Opening notebooks

    - by Plastkort
    I have a Compaq CQ40 which has a defective CPU fan, it seems unable to cool the notebook enough at this time, it is constantly running, and if you move the pc up/down to look under it, it makes some sort of chainsaw sound. I have tried to take out all the screws underneath, but I still have a problem with the plastic cover on the above; I am afraid I might break it since it seem to be connected with plastic clips underneath. I have fixed notebooks before, but this one seem new, how can I open the plastic cover above without breaking it? Any advice, tips and tricks would be so nice to have, not only for this notebook, but any future notebook also I might need to repair. It would be nice if anyone here knows a place with video tutorials on this subject as well.

    Read the article

  • HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

    - by henpenben
    So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

    Read the article

  • Network Performance issue

    - by qubemarker
    We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

    Read the article

  • Data unaccessible from WHS drive

    - by Eakraly
    Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

    Read the article

  • Data unaccessible from WHS drive

    - by Eakraly
    Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

    Read the article

  • Personal Browsing Monitor Software [closed]

    - by jmadden93
    Anyone know of any personal browsing monitor software? I'd like to be able to monitor my own browsing habbits and the time I spend on entertainment, vs work vs educational sites. Something that offers more than simply looking at the history feature built into browsers. It would be nice if it gave you a breakdown of how much time you spend on certain categories of sites like social media, vs video, vs. news, productivity, etc. I think it would be useful to know how one spends their time.

    Read the article

  • DELL U2410 Monitor(Display Port) & Graphic card

    - by Anj
    I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

    Read the article

  • Impossible do find motherboard drivers to and old Dell computer

    - by Masziej
    Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

    Read the article

  • Allow Internet Access with Default Gateway on Windows 7 VPN Server

    - by Hakoda
    I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

    Read the article

  • Create a home virtual network

    - by Tom Lisc
    I can't seem to get answers to this question. I want to setup up 2-3 computers in my house to run Linux based virtual machines fed from my dedicated Arch Linux server. I need them to have full sound and video support. At my workplace we use VMware (View), but that is too cost prohibited for me to deploy for my wife and the two 10 year olds. I have tried Virtualbox machines and they are fine, but I cannot get sound working. Any help/hints would be greatly appreciated.

    Read the article

  • 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

    - by user12889
    I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

    Read the article

  • Snapshots are disappearing from Time Machine. Why?

    - by AntonAL
    I have TimeMachine enabled for my external HDD. I'm triggering backups manually 2 times per week. I have noticed, that some snapshots, that i made, are gone. I noticed this behaviour several weeks later, but i had doubts. To make it sure, i've recorded screen video with listing snapshots in TimeMachine. After watching my screen recording today, I'm sure, that for Augusut i had 9 snapshots. Now, i have only 3 of them. What's happening ? I had no crash disk reports, errors etc

    Read the article

  • use correct-resolution background desktop image

    - by Rob Bos
    I have a desktop background image (a picture) in a half-dozen different resolutions, that I'd like to deploy to a disparate collection of computers with different monitors and video cards and whatnot. Laptops, netbooks, desktops, widescreen, and even a couple of "tall" screens. I have images to cover most of the cases. I would like Windows 7 to correctly pick the correct desktop background image via group policy. Now, the logon screen is already done. The OEMBackground method is rather clever, and lets you copy files of different resolutions to the machine, and the logon app will calculate the aspect ratio of the monitor and match it to a file as closely as possible. Is there any way to have that functionality on the desktop background as well?

    Read the article

  • Slow running Ubuntu 10.10 laptop

    - by user5978
    Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

    Read the article

  • How to play multiple videos side-by-side synchronized?

    - by Don Salva
    I've got 3 videos, all 3 have the same time, same amount of frames, and they only differ in terms of encoding quality. Now I need them to run side-by-side in synchronized fashion for evaluation purposes. Meaning when I press "play" BOTH! videos should start. Analogically for stop, forward, backward. Anyone know any player capable of doing that? By that I mean playing more than 1 video side-by-side... Platform: Win7

    Read the article

  • How to get the CentOS 5.6 alsa drivers which will really work with one shot, without any internet.

    - by 89899.3K
    I have one chance to install this in my server on site. Server that i am running is CentOS 5.6 (Dell R310, RAID1) where i need to install alsa-sound driver so that anything related to audio recording from rtsp is working (rail station/rail passing video recording including audio, where audio is not working). Unfortunately i do not have any kind of internet in that odd none human location so yum will not work for me. I need a offline way to install alsa drivers including missing dependencies if arise. What and where i can download this to my usb or cd? so that i can successfully install it (like mission complete). Thanks

    Read the article

  • Controlling TV Channel Through Computer

    - by killianmcc
    I'm passing my TV input through my computer so that I can use the video stream in an application I'm creating which then outputs to my TV. E.g. Sky Digibox/FreeView box - Laptop - TV Where on my laptop I'll be using the stream in a WPF application so I can overlay XAML objects onto it. My question is, what would be the best way for me to send the signal back to the box to say change the channel for example? I don't want to have to use the remote, I want the computer to handle everything. Is there a standard cable these boxes have that could take what would normally be a remote control signal and use that as input instead? Or would I have to go down the route of looking at some sort of Infared LED to send the signal recreating the remote? Apologies if this is not clear enough, let me know and I'll try and be more precise.

    Read the article

  • Is there a fix for an iMac G5 annoying screen pattern issue?

    - by smountcastle
    It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

    Read the article

  • Blank screen on laptop after replacement

    - by Mark
    I have an Acer Aspire 5332 laptop, running Windows 7 home premium 32bit. My screen broke, but the particular screen (LED) are no longer made so I bought a CCFL one with a new converter which has proven to be compatible according to the supplier. When I first booted the screen went blank just after the Windows logo was displayed. I suspected a driver issue, so booted in safe mode without any problems, disabled the display adapter (Intel 4 series express family) and it booted up fine. So I guess the screen is not compatible with the display adapter. The driver version is 8.15.10.1892. I tried updating from the Intel site, but it saying it cannot (something to do with manufacturer specific). The supplier is not willing to take it back, so I'm down £60 (UK). I can use it with the adapter disabled, but the quality is bad and I cannnot play video, etc. Any help appreciated.

    Read the article

  • MongoDB PHP EC2 Setup Configuration

    - by nathansizemore
    I am new to web development and server set up. I am looking for some advice or a link to a tutorial on setting up a production system up. Right now, I have a server (Ubuntu, Apache, MongoDB, and PHP). It receives a request, PHP queries Mongo, and PHP sends out the requested data. How do I make that work with more servers? I've read that you can make a cluster of a primary and two slave nodes which work as separate servers running Mongo, but do those also run PHP? Or is the primary the only one running the PHP? I have read some docs on Mongo site and a video of someone from 10gen going through it, but they are geared towards people that seem to already understand this stuff, I have no idea and need to start from a beginning stage. If anyone can help me understand where PHP (Acting as my API) lives in these clusters, that would be greatly appreciated! Thanks in advance for any help!

    Read the article

  • 100% CPU in QuickTime H.264 decoder on Windows on Win7, except when using XP compat. mode

    - by user858518
    I have a Windows program that uses the Apple QuickTime API to play video. On Windows 7, CPU usage is 100% on one core, which I believe is why the playback is choppy. If I turn on XP compatibility mode for this program, the CPU usage is around 20% of one core, and playback is normal. Using a profiling tool called Very Sleepy (http://www.codersnotes.com/sleepy), I was able to narrow down the high CPU usage to a function in the QuickTime H.264 decoder called JVTCompComponentDispatch. I can't imagine why there would be a difference in CPU usage when XP compatibility mode is turned off or on. Any ideas?

    Read the article

  • Asus V1S screen dimming randomly

    - by Bill
    I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

    Read the article

  • What is Slotted and pure aloha?

    - by caspert
    So I am having a really hard time understanding slotted and pure aloha. I have understood CSMA/CD fairly well, but that is it. I have the book: Computer networking - a top down approach, but I find the explanation very cryptic and hard to understand. Wikipedia did not help me. Does anyone have a brief "aloha for dummies" explanation? or perhaps a video tutorial? I think I need something visual. I don't need to be able to create the protocol, I just need a general understanding of it.

    Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >