Search Results

Search found 91599 results on 3664 pages for 'user manual'.

Page 369/3664 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• PC can't detect second RAM installed

  - by kulwinder

  I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

  Read the article

• How can I set the CD audio volume in Linux?

  - by user1296362

  In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

  Read the article

• How to make network drives appear even if disconnected?

  - by Jake

  I have the same problem as many others: network and home drives set by group policy and AD are not connected on windows startup. The prime suspect is that the LAN or wireless does not connect until after user log in. I have already given up on that. Now, I just want the disconnected drives to continue to list in My Computer so that if the user goes in and double click the drive, it will connect again. However, on some machines the drive is completely missing from My Computer. If I right click My Computer Map Network Drive again, it does work. But it's very troublesome to do it all the time. And I don't want to use a script to map the drives because I don't want to appear to be using a hacky solution to the users. The drives listed as disconnected will look more like a "built-in feature", and gives users more confidence. How can I keep the disconnected drives in My Computer? I am using Windows 7 Professional and Win2k8.

  Read the article

• How do I fix Internet Explorer / Firefox differences in Oracle JD Edwards Enterprise?

  - by CT

  Our company uses Oracle's JD Edwards Enterprise to do accounting work. We have an application consultant working for us to just deal JD Edwards but he is of non-technical background so only helps in application-specific support. All of our users should use IE 7 for JDE. About 15-20% of those users have problems which cause them to not be able to use IE 7. So those problematic users use firefox. For the most part firefox works fine but there are a few issues. Some menus / options within JDE that are present in IE 7 are not present in firefox. If I could get all of our users working under IE 7, all the firefox issues would be mute points. I have cross referenced Internet Options settings from a working IE 7 user and a non-working IE 7 user. All settings seem to be mirrored. I'm not sure how to go about continuing to troubleshoot this issue. So not only answers but just suggestive ideas for attack would be appreciated. Thanks

  Read the article

• Resize a RAID 1 volume on OS X Snow Leopard - how? (Note: software raid)

  - by Emmel

  I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OS X 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

  Read the article

• VGA to S-Video/Video converter showing mashed up picture.

  - by Matthijs Wessels

  Earlier I asked this question: *http://superuser.com/questions/132374/does-the-lenovo-t60p-vga-port-support-an-s-video-signal As a result I acquired the following item: http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=250588098582&ssPageName=ADME:B:EOIBSA:NL:1123 Yea I'm a cheapass... Anyway, it just arrived and now I am trying to get it to work... The manual is not very informative other than telling me, this is the vga in, this is the vga out, this is the s/video out etc. Plus it tells me the system should support the following resolutions@refresh rate: 640x480@60/72/75Hz 800x600@60/75Hz 1024x768@60Hz I can connect it to my laptop and then I connect the S/Video and the Video to my tv which only gives me a blurred image (like when you set your monitor to a resolution it doesn't support). The VGA out however works fine to my tft monitor. The are two switches on the converter. I think one switches between s/video and video and the other between PAL and NTSC. But alas, no combination seems to give a better picture (it does give a different picture). Can anyone help me to solve this problem? I have downloaded this program called powerstrip, but I have no idea how to use it and if it can even solve my problem... Thanks in advance. I use Windows XP on a Lenovo t60p and I try to connect it to a Philips 32PFL7403D/12 LCD TV from VGA to a converter to S-video or video.

  Read the article

• How can I display additional boot and shutdown information on the Windows 7 welcome screen?

  - by Daniel Saner

  There is a small tweak, I believe it is a registry key, that allows to display additional information on the Welcome and Shutting down screens of Windows 7 (and most likely Vista, too). I have activated this tweak on one of my systems; unfortunately I forgot how I did it, and I can't seem to find the website that originally gave me that information. Usually, the Windows 7 welcome screen will just display "Welcome" when logging in. With the tweak activated, my Welcome screen gives status information such as "Loading user settings" or "Preparing desktop". When shutting down, the default screen simply says "Shutting down". With the tweak activated, it gives additional status information such as "Stopping Windows services". This appears the same way that Windows gives information when updates are installed or configured during the startup or shutdown procedure, and I find them quite helpful in getting a feel for what task takes how long during that process. The only setting I was able to find is the Boot log checkbox on the Boot tab of the msconfig application. However, this results in Windows displaying console logs of drivers it is loading, etc., instead of the animated Windows title. This is NOT the setting I am looking for. The "additional boot information" setting that I have activated on this system still displays the regular animated Windows logo, and only replaces the strings displayed on the blue Welcome and Shutdown screens. Could someone direct me to the registry key (or whatever setting) that is used to get this behaviour? Edit: Here are a few pictures of the enhanced Welcome and Shutdown screens taken with my mobile phone—they're in German though. Login screens "Waiting for User Profile Service" and "Preparing desktop": Logout screen "Stopping Windows services":

  Read the article

• How to debug a kernel created using ubuntu-vm-builder?

  - by user265592

  Aim: Trying to perform a code walkthrough of what functions are getting called for sending and receiving packets over the network. I am building a kernel and using gdb for debugging/ tracing purposes. I have build a vm using the following command : time sudo ubuntu-vm-builder qemu precise --arch 'amd64' --mem '1024' --rootsize '4096' --swapsize '1024' --kernel-flavour 'generic' --hostname 'ubuntu' --components 'main' --name 'Bob' --user 'ubuntu' --pass 'ubuntu' --bridge 'br0' --libvirt 'qemu:///system' And I can run the VM successfully in qemu using the following command: qemu-system-x86_64 -smp 1 -drive file=tmpGgEOzK.qcow2 "$@" -net nic -net user -serial stdio -redir tcp:2222::22 Now, I want to debug the kernel using gdb. For this I need an executable with debug symbols(vmlinux), which apparently I don't have, as the vm-builder never asked for any such options and simply created a .qcow2 file. Question 1: Am I taking the correct approach to solve the problem and is there an easier way to do it? Question 2: Is there a way to debug this kernel using GDB? P.S: I don't have hardware support for KVM. Please correct me if I am wrong. Thanks.

  Read the article

• GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• Mounting a VirtualBox shared folder on boot with fstab in OpenSuse 11.3

  - by ccook

  I have followed the steps found here, however, the share is not mounted on boot. The share will mount if i run 'mount -a' after booting. Why would the share not mount on boot? 1 - Set up a Virtual Machine and install OpenSUSE 11.2 2 - Create a shared folder on host (HostFolder) 3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices Shared Folders... 4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper install make gcc kernel-source kernel-hosttype/default-devel 5 - Run the Virtual Machine and go to Devices Guest Additions This mounts an iso image in your OpenSUSE guest. 6 - Open a root terminal and run cd /usr/src/linux make oldconfig && make prepare && make scripts && make dep cp ../linux-obj/$HOSTTYPE/default/Module.symvers . make prepare A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. * 7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image. 8 - Create shared folder in OpenSUSE (GuestFolder) 9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access. 10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0 11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

  Read the article

• Windows memory logged on vs logged off

  - by Adi

  Let's say I power on my fresh installed Windows 7 x64 machine. After Windows boots up, there are a bunch of services being started in the background that start allocating memory. Then I enter my user/pass and Windows logs me in. Let's supose I don't do anythig else (I don't explicitely start any application) and I don't have any other app installed by me. So it's fresh install of my machine. My question is: how much memory is needed for all the UI & other stuff? Is it a good indicator to look into task manager and check all the processes started under my user name and sum up all the memory consumed by those processes to get the total amount of memory I am consuming just to stay logged on? Basically this is my question: how much memory is needed just to stay logged on? Now, if log off would all the memory be released back to the system so that the background services can benefit of? Also, I assume that there might be a different discussion for each Windows flavors (?)

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Linux drivers for laser printer Konica Minolta Magicolor 4750DN

  - by user51166

  I would like to install the konica minolta magicolor 4750DN in Linux (debian 64 bits, I know it's not really supported but that's not the issue right now) but all the manual says is "put the CD rom in and copy the drivers and PPD file". However I did not get the CD ! On their "fantastic" internet site (...) there are only available drivers for Windows and Mac OSX. I tried to extract the ppd file from the .dmg file for MacOSX 10.7 but, if the PPD file works, a compiled file (only mac compiled, MACH 4 architectures says the "file" command) does not (obviously "cannot execute binary file", since I'm trying to run a Mac file on Linux). Is there anybody who has the same printer that could lend me the Linux drivers on the CD ROM ? Couldn't find them anywhere on the internet. Any way to execute a Mach (or BSD) binary file on Linux (I don't think is possible, although some "emulators" may exist). Thank you very much. I buyed this printer even because it was advertised as "Linux compatible", only to get this bad surprise. I would be grateful if you could help me solve this problem.

  Read the article

• Finding custom printer-specific options on *nix

  - by enbuyukfener

  Hey all, I have a printer set up using CUPS (FujiXerox Document Center 1100), it is named DC1100. There are capabilities of the printer that are not shows as options of the printer as listed by: lpoptions -l -d DC1100 The output is below: PrintoutMode/Printout Mode: Draft *Normal High Photo InputSlot/Media Source: Upper Lower MultiPurpose LargeCapacity Manual *Standard PageSize/Page Size: *Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement PageRegion/PageRegion: Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement STP_Brightness/Brightness: 0.00 0.02 0.04 [snip] 2.00 STP_Contrast/Contrast: 0.00 0.05 0.10 0.15 [snip] 4.00 STP_ColorCorrection/Color Correction: Accurate Bright Density [snip] Uncorrected STP_DitherAlgorithm/Dither Algorithm: Adaptive EvenTone Fast [snip] VeryFast STP_EnableDensity/Density Enable: *Disabled Enabled STP_Density/Density Value: 0.1 0.2 0.3 0.4 [snip] 8.0 STP_EnableGamma/Composite Gamma Enable: *Disabled Enabled STP_Gamma/Composite Gamma Value: 0.10 0.15 0.20 0.25 [snip] 4.00 STP_LinearContrast/Linear Contrast Adjustment: *False True STP_Duplex/Double-Sided Printing: DuplexNoTumble DuplexTumble *None Resolution/Rendering Resolution: *FromPrintoutMode 150x150dpi 300x300dpi 600x600dpi OutputType/Output Type: *FromPrintoutMode BlackAndWhite Grayscale STP_ImageType/Image Type: *FromPrintoutMode Photo Graphics LineArt None Text TextGraphics STP_Resolution/Resolution: *FromPrintoutMode 150dpi 300dpi 600dpi I am particularly looking for options for: "secure print" (possibly by setting a mode and setting a username) stapling hole punching Perhaps I need a vendor specific driver/PPD file? If so, any pointers as I have no idea where to look for one. I haven't been able to find one on the official site or on sites such as http://www.openprinting.org

  Read the article

• how to debug when xinetd says : got signal 17 (child exited)

  - by Faizan Shaik

  I am trying to start services vsftpd and sshd using xinetd. my config files are as follows. /etc/xinetd.conf defaults { instances = 60 log_type = FILE /var/log/xinetdlog log_on_success = HOST PID log_on_failure = HOST cps = 25 30 only_from = localhost } includedir /etc/xinetd.d /etc/xinetd.d/ftp service ftp { disable = no server = /usr/sbin/vsftpd server_args = -l user = root socket_type = stream protocol = tcp wait = no instances = 4 flags = REUSE nice = 10 log_on_success += DURATION HOST USERID only_from = 127.0.0.1 10.0.0.0/24 } /etc/xinetd.d/ssh service ssh { disable = no log_on_failure += USERID server = /usr/sbin/sshd user = root socket_type = stream protocol = tcp wait = no instances = 20 flags = REUSE only_from = 127.0.0.1 10.0.0.0/24 } Even though i've included only_from attribute, vsftp server as well as ssh server are refusing connection from localhost. while vsftp and ssh servers are working fine individually when i check with "service vsftpd start" and "service ssh start". when i did debug using "xinetd -d" throug terminal i got the output as 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ftp 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ssh 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} mask_max = 8, services_started = 2 13/10/20@00:06:08: NOTICE: 3592 {main} xinetd Version 2.3.14 started with libwrap loadavg options compiled in. 13/10/20@00:06:08: NOTICE: 3592 {main} Started working: 2 available services 13/10/20@00:06:08: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {server_start} Starting service ftp 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3607 {exec_server} duping 9 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {check_pipe} Got signal 17 (Child exited) 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = 3607 13/10/20@00:06:16: DEBUG: 3592 {server_end} ftp server 3607 exited 13/10/20@00:06:16: DEBUG: 3592 {svc_postmortem} Checking log size of ftp service 13/10/20@00:06:16: INFO: 3592 {conn_free} freeing connection 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = -1 both services are getting started but neither of them is working. after banging for 3-4 hours i still don't have any clue about this error. Any help would be appreciated. thanks!

  Read the article

• Notebook Operating System with extreme support cycles/security updates

  - by leto

  Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

  Read the article

• Resize a RAID 1 volume on OS X Snow Leopard - how? (Note: software raid)

  - by Emmel

  I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OS X 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

  Read the article

• Why Is Volume Shadow Copy Services stopping?

  - by David Mackintosh

  I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

  Read the article

• Troubleshooting wireless client-bridged networks between two DD-WRT routers?

  - by KronoS

  I recently purchased a Buffalo N600 wireless router which came with DD-WRT pre-installed. I want to take my old wireless router a Linksys WRT54GL, also with DD-WRT pre-installed, and use it as a wireless bridge for my HTPC and Blu-Ray Player in the other room. I other words, I'm trying to connect to WIRED networks via the wireless on the routers. I followed eactly the instruction from DD-WRT's manual for 'Client Bridged' however I'm still not able to connect to two routers correctly, when the encryption is enabled (WPA2-Personal Mixed) however I am able to connect the two routers when there is NO encryption. I've checked, double checked, and triple checked that EVERYTHING is the same on BOTH routers: Routers 1 & 2 Encryption: WPA2-Personal Mixed Wireless Mode: G-Only Wireless Channel: 6 Subnet Mask: 255.255.255.0 Subnet: 192.168.1.0/254 SSID: Krono$ Primary Router #1 (Buffalo N600) IP Address: 192.168.1.1 Firewall: Enables w/ defaults DCHP: Enabled as DHCP Server Secondary Router #2 (Linksys WRT54GL) IP Address: 192.168.1.2 Firewall: Disabled as per DD-WRT instructions I'm looking for any configurations that I may have missed, or settings that may need to happen in order for this work.

  Read the article

• linux command prompt ftp to ftp server running on windows

  - by Vass

  Hi, I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xx I enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc? Best,

  Read the article

• Pair programming with tmux and Vagrant

  - by neezer

  Does anyone have a clear step-by-step guide for setting up a shared tmux session on a Vagrant vbox that my coworkers (on our local office lan) could SSH into? The articles I've found online only seem to cover setting this up from machine to machine (no virtualbox setups), and I'm not very good at networking, so I haven't been able to extrapolate a solution... We're all running the latest Macs in our office, btw. Here's one article I've found but haven't been able to get working with Vagrant: http://blog.voxdolo.me/remote-pairing-with-vim-and-tmux.html EDIT: To clarify, I don't really know how I should be setting up Vagrant to allow me to SSH into it from a machine outside the one hosting the VM. The article above suggests that I add the tunnels host on my physical machine running the VM (here-on referred to as the MBP), so I did that. Next is the ProxyCommand host declaration, which I have also assumed should live on the MBP. So next I try SSHing into the MBP from a guest machine (another separate physical machine on my network), and that seems to work... but that only gets me into the MBP, not the Vagrant image running on the MBP. I normally login Vagrant image on the MBP via vagrant ssh (per the docs), and I know how to forward ports on the Vagrant VM to the MBP, but it's unclear to me how I could forward ports/SSH from the MBP to the Vagrant VM, which I assume I would need to do so that my guest machine could SSH in--through the MBP--to my Vagrant image. That, in a nutshell, is what I'm trying to accomplish. I do my development work in Vagrant VMs which keeps my MBP nice and clean of any dev-related cruft and also keeps my dev environments totally isolated from one another, yet I would like to start pair-programming with my coworkers via tmux, thus the reason why I've asked this question. I would like to accomplish all of this without setting up an additional user account on the MBP, or giving my coworkers access to my local user account on the MBP to get to my Vagrant VM, if that's at all possible.

  Read the article

• How to create Windows Vista/Windows 7 Startup disk or Rescue disk or system restore points on a CD?

  - by goldenmean

  Hello, I have two laptops, one having Windows-Vista home premium and other one having Windows-7 professional. Both versions of OS are OEM installs(pre-installed when I bought the laptop) and I do not have the Windows Installation disks for them. usually the installation disks provide a repair option in case one needs to repair/rescue a improper windows installation. But since I dont have the installation disks, I want to create rescue disks/startup disks for these. My questions are : 1] How to create a system rescue disk/startup disk on a CD from these two versions of Windows? 2] Doesn't the system restore points which Vista/Windows-7 create, cannot be created on a CD disk instead of hard-disk? 3] If I have a manual backup of my windows registry, in which I have exported all the registry to a file and I have that file on a CD, how to restore that registry back to the windows installation which might not be booting up properly due to bad registry problem. EDIT: 4]Is there any way to use these system restore points directly during bootup of the laptop, if windows does cannot boot properly due to problem. First laptop is HP Pavillion dv6646 and second one is Sony VAIO VCPEE series. thank you. -AD

  Read the article

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• Timeout settings for Remote Desktop Sessions to lock

  - by atroon

  Our office uses a Windows 2003 server to provide access to an accounting application. Recently I was asked to increase the amount of time it takes for the session to lock itself and require the entry of the user's password to resume. That seems to be about ten minutes, at present. I am familiar with group policy and have tweaked those settings to scavenge sessions (and thereby licenses) from sessions that have been disconnected (by the user closing the mstsc.exe client or by a network issue). That's simple and straightforward. But I can't find anything in GP to allow a longer time period before the RDP client window goes black and then, when clicked upon, requires a username and password to resume the session. I must admit this would be nice personally as well, since most of my time is spent documenting the application and/or monitoring its database, so I usually have a window open to the terminal server along with the rest of the staff in the accounting center, but I interact with it very little. I usually enter my password 10-15 times per workday, but I'm pretty good at it by now. ;) So, can this timeout period be adjusted, or are we out of luck?

  Read the article

• installed mysql using yum but mysqld dowsnt start: Fedora 16

  - by Sumit Singh Bir

  i installed mysql mysql-server and mysql-libs ... after installation i thought to start the mysql service using command systemctl start mysqld.service Failed to issue method call: Unit mysqld.service failed to load: Invalid argument. See system logs and 'systemctl status mysqld.service' for details. systemctl status mysqld.service this said that it had an invalid argument then i changed the content of mysqld.service with this File: /etc/systemd/system/mysqld.service [Unit] Description=MySQL database server After=syslog.target After=network.target [Service] User=mysql Group=mysql ExecStart=/usr/sbin/mysqld --pid-file=/var/run/mysqld/mysqld.pid ExecStop=/bin/kill -15 $MAINPID PIDFile=/var/run/mysqld/mysqld.pid # We rely on systemd, not mysqld_safe, to restart mysqld if it dies Restart=always # Place temp files in a secure directory, not /tmp PrivateTmp=true [Install] WantedBy=multi-user.target now i found that the error for invalid argument was resolved and mysqld.service was loaded but not enabled ... using systemctl start mysqld.service worked fine ... it workedddd! but then enabling it systemctl enable mysqld.service or service mysqld start did not do anything but the curdor kept on blinking after i pressed enter ... now the thing is that for this f16 i wasted my HDD space for development work and i cannot figure out a way ... please somebody help

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >