Search Results

Search found 2782 results on 112 pages for 'policy'.

Page 37/112 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Cisco PIX firewall blocking inbound Exchange email

    - by sumsaricum
    [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

    Read the article

  • Independent contractors posting projects to their portfolio

    - by Yuji Tomita
    I'm about to hire freelance contractors to do small pieces of my web projects. Is it standard to allow them to put the project on their portfolio? Say a simple debugging task getting a specific mobile problem fixed in <5 hours. I'm just concerned as it could potentially dilute my company's portfolio by having it listed by each contractor when in fact the majority of work is done by me. I'm trying to build a portfolio here as an agency. I think it's a risk for my company since I'm working hard to get clients and the whole point is putting projects on my portfolio. Am I wrong here? Is there an standard policy for this? Perhaps a limited policy whereby attribution is required to the agency? Did exactly X for agency Y (link).

    Read the article

  • Remote Graphics Diagnostics with Windows RT 8.1 and Visual Studio 2013

    - by Michael B. McLaughlin
    Originally posted on: http://geekswithblogs.net/mikebmcl/archive/2013/11/12/remote-graphics-diagnostics-with-windows-rt-8.1-and-visual-studio.aspxThis blog post is a brief follow up to my What’s New in Graphics and Game Development in Visual Studio 2013 post on the MVP Award blog. While writing that post I was testing out various features to try to make sure everything worked as expected. I had some trouble getting Remote Graphics Diagnostics (a/k/a remote graphics debugging) working on my first generation Surface RT (upgraded to Windows RT 8.1). It was more strange since I could use remote debugging when doing CPU debugging; it was just graphics debugging that was causing trouble. After some discussions with the great folks who work on the graphics tools in Visual Studio, they were able to repro the problem and recommend a solution. My Surface RT needed the ARM Kits policy installed on it. Once I followed the instructions on the previous link, I could successfully use Remote Graphics Diagnostics on my Surface RT. Please note that this requires Windows RT 8.1 RTM (i.e. not Preview) and that Remote Graphics Diagnostics on ARM only works when you are using Visual Studio 2013 as it is a new feature (it should work just fine using the Express for Windows version). Also, when I installed the ARM Kits policy I needed to do two things to get it to work properly. First, when following the “How to install the Kits policy” instructions, I needed to copy the SecureBoot folder into Program Files on my Surface RT (specifically, I copied the SecureBoot folder to “C:\Program Files\Windows Kits\8.1\bin\arm\” on my Surface RT, creating any necessary directories). It may work if it’s in any system folder; I didn’t test any others after I got it working. I had initially put it in my Downloads folder and tried installing it from there. When the machine restarted it displayed a worrisome error message. I repeatedly pressed the button that would allow me to retry and eventually the machine rebooted and managed to recover itself to its previous state. Second, I needed to install it as an Administrator. The instructions say that this might be necessary. For me it was. This is a Remote Graphics Diagnostics is a great new feature in Visual Studio 2013 so I definitely encourage all of you to check it out!

    Read the article

  • mplayer does not disable screensaver

    - by psychok7
    so i have upgraded to Ubuntu 12.10 and i installed smplayer from the repositories. The thing is when i play a movie (even in full screen) the screen saver comes up. I have to disable screensaver enabled in smplayer but it doesn't seem to work apt-cache policy mplayer mplayer: Installed: 2:1.0~rc4.dfsg1+svn34540-1ubuntu2 Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu2 Version table: *** 2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0 500 http://pt.archive.ubuntu.com/ubuntu/ quantal/universe amd64 Packages 100 /var/lib/dpkg/status apt-cache policy gnome-screensaver gnome-screensaver: Installed: 3.6.0-0ubuntu2 Candidate: 3.6.0-0ubuntu2 Version table: *** 3.6.0-0ubuntu2 0 500 http://pt.archive.ubuntu.com/ubuntu/ quantal-updates/main amd64 Packages 100 /var/lib/dpkg/status 3.6.0-0ubuntu1 0 500 http://pt.archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages Any ideas?

    Read the article

  • Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

    - by Pelle L
    I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

    Read the article

  • Default Location of Web Site Content

    - by RichyL
    I am looking to install mediawiki on a production server (after doing a test on a development one). I could not really understand why the default location for the mediawiki files is /var/lib/mediawiki. I would have thought /var/www would've made more sense. I did some research and in http://people.canonical.com/~cjwatson/ubuntu-policy/policy.html/ch-customized-programs.html#s-web-appl it says the following Web Document Root Web Applications should try to avoid storing files in the Web Document Root. Instead they should use the /usr/share/doc/package directory for documents and register the Web Application via the doc-base package. If access to the web document root is unavoidable then use /var/www Can anyone explain why this is please?

    Read the article

  • Android: How to track down the origin of a InflateException?

    - by Janusz
    While starting my application I get the following warning in Logcat: 04-09 10:28:17.830: WARN/WindowManager(52): Exception when adding starting window 04-09 10:28:17.830: WARN/WindowManager(52): android.view.InflateException: Binary XML file line #24: Error inflating class <unknown> 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.createView(LayoutInflater.java:513) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.internal.policy.impl.PhoneLayoutInflater.onCreateView(PhoneLayoutInflater.java:56) 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:563) 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.inflate(LayoutInflater.java:385) 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.internal.policy.impl.PhoneWindow.generateLayout(PhoneWindow.java:2153) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.internal.policy.impl.PhoneWindow.installDecor(PhoneWindow.java:2207) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.internal.policy.impl.PhoneWindow.getDecorView(PhoneWindow.java:1395) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.internal.policy.impl.PhoneWindowManager.addStartingWindow(PhoneWindowManager.java:818) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.server.WindowManagerService$H.handleMessage(WindowManagerService.java:8794) 04-09 10:28:17.830: WARN/WindowManager(52): at android.os.Handler.dispatchMessage(Handler.java:99) 04-09 10:28:17.830: WARN/WindowManager(52): at android.os.Looper.loop(Looper.java:123) 04-09 10:28:17.830: WARN/WindowManager(52): at com.android.server.WindowManagerService$WMThread.run(WindowManagerService.java:531) 04-09 10:28:17.830: WARN/WindowManager(52): Caused by: java.lang.reflect.InvocationTargetException 04-09 10:28:17.830: WARN/WindowManager(52): at android.widget.FrameLayout.<init>(FrameLayout.java:79) 04-09 10:28:17.830: WARN/WindowManager(52): at java.lang.reflect.Constructor.constructNative(Native Method) 04-09 10:28:17.830: WARN/WindowManager(52): at java.lang.reflect.Constructor.newInstance(Constructor.java:446) 04-09 10:28:17.830: WARN/WindowManager(52): at android.view.LayoutInflater.createView(LayoutInflater.java:500) 04-09 10:28:17.830: WARN/WindowManager(52): ... 13 more 04-09 10:28:17.830: WARN/WindowManager(52): Caused by: android.content.res.Resources$NotFoundException: Resource is not a Drawable (color or path): TypedValue{t=0x2/d=0x1010059 a=-1} 04-09 10:28:17.830: WARN/WindowManager(52): at android.content.res.Resources.loadDrawable(Resources.java:1677) 04-09 10:28:17.830: WARN/WindowManager(52): at android.content.res.TypedArray.getDrawable(TypedArray.java:548) 04-09 10:28:17.830: WARN/WindowManager(52): at android.widget.FrameLayout.<init>(FrameLayout.java:91) 04-09 10:28:17.830: WARN/WindowManager(52): ... 17 more My Application starts with the following splash screen: <?xml version="1.0" encoding="utf-8"?> <ScrollView xmlns:android="http://schemas.android.com/apk/res/android" android:windowBackground="@color/white" android:background="@color/white" android:layout_width="fill_parent" android:layout_height="fill_parent" android:foregroundGravity="center"> <ImageView android:id="@+id/ImageView01" android:layout_width="fill_parent" android:layout_height="fill_parent" android:adjustViewBounds="true" android:scaleType="centerInside" android:src="@drawable/splash" android:layout_gravity="center" /> </ScrollView> Splash is the image that is shown in the splash screen. I have those four folders with for storing drawables in my app: /res/drawable-hdpi /res/drawable-ldpi /res/drawable-mdpi /res/drawable-nodpi the splash image has its own version in the first three of them and is displayed properly. Removing the src property from the ImageView removes the image but not the exception. I'm a little bit lost with where to look for the cause of the exception. I even don't know if this is really an issue in this layout file etc. How would you go about finding the cause for this warning?

    Read the article

  • Single DispatcherServlet with Multiple Controllers

    - by jwmajors81
    I am trying to create some restful web services using Spring MVC 3.0. I currently have an issue that only 1 of my 2 controllers will work at any given time. As it turns out, whichever class comes first when sorted alphabetically will work properly. The error I get is: handleNoSuchRequestHandlingMethod No matching handler method found for servlet request: path '/polinq.xml', method 'GET', parameters map[[empty]] I had a very simliar message earlier also, except instead of the map being empty it was something like map[v--String(array)] Regardless of the message though, currently the LocationCovgController works and the PolicyInquiryController doesn't. If I change the change of the PolicyInquiryController to APolicyInquiryController, then it will start funcitoning properly and the LocationCovgController will stop working. Any assistance would be greatly appreciated. Thank you very much, Jeremy The information provided below includes the skeleton of both controller classes and also the servlet config file that defines how spring should be setup. Controller 1 package org.example; @Controller @RequestMapping(value = "/polinq.*") public class PolicyInquiryController { @RequestMapping(value = "/polinq.*?comClientId={comClientId}") public ModelAndView getAccountSummary( @PathVariable("comClientId") String commercialClientId) { // setup of variable as was removed. ModelAndView mav = new ModelAndView("XmlView", BindingResult.MODEL_KEY_PREFIX + "accsumm", as); return mav; } } Controller 2 package org.example; @Controller @RequestMapping(value = "/loccovginquiry.*") public class LocationCovgController { @RequestMapping(value = "/loccovginquiry.*method={method}") public ModelAndView locationCovgInquiryByPolicyNo( @PathVariable("method")String method) { ModelAndView mav = new ModelAndView("XmlView", BindingResult.MODEL_KEY_PREFIX + "loccovg", covgs); return mav; } } Servlet Config <context:component-scan base-package="org.example." /> <bean class="org.springframework.web.servlet.view.ContentNegotiatingViewResolver" p:order="0"> <property name="mediaTypes"> <map> <entry key="atom" value="application/atom+xml"/> <entry key="xml" value="application/xml"/> <entry key="json" value="application/json"/> <entry key="html" value="text/html"/> </map> </property> <property name="defaultContentType" value="text/html"/> <property name="ignoreAcceptHeader" value="true"/> <property name="favorPathExtension" value="true"/> <property name="viewResolvers"> <list> <bean class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="prefix" value="/WEB-INF/jsp/"/> <property name="suffix" value=".jsp"/> </bean> </list> </property> <property name="defaultViews"> <list> <bean class="org.springframework.web.servlet.view.json.MappingJacksonJsonView"/> </list> </property> </bean> <bean class="org.springframework.web.servlet.view.BeanNameViewResolver" /> <bean id="XmlView" class="org.springframework.web.servlet.view.xml.MarshallingView"> <property name="marshaller" ref="marshaller"/> </bean> <oxm:jaxb2-marshaller id="marshaller"> <oxm:class-to-be-bound name="org.example.policy.dto.AccountSummary"/> <oxm:class-to-be-bound name="org.example.policy.dto.InsuredName"/> <oxm:class-to-be-bound name="org.example.policy.dto.Producer"/> <oxm:class-to-be-bound name="org.example.policy.dto.PropertyLocCoverage"/> <oxm:class-to-be-bound name="org.example.policy.dto.PropertyLocCoverages"/> </oxm:jaxb2-marshaller>

    Read the article

  • Port forwarding on Fortigate 50B

    - by sindre j
    I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

    Read the article

  • iptables issue on plesk

    - by Fred Rufin
    i don't know how to open a specific port (rtmp=1935) on my CentOS server using Plesk or itables. I created new rules for port 1935 i/o using Plesk/Modules/Firewall but this doesn't work. Nmap scanning tells me this : 1935/tcp filtered rtmp . So i decided to have look at my iptable using SSH (iptables -L), and iptables seems to contain my rules (tcp spt:macromedia-fcs): Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:filenet-tms:65535 ACCEPT udp -- anywhere anywhere udp dpts:filenet-tms:65535 ACCEPT tcp -- anywhere anywhere tcp dpt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp dpt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp dpt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:http ACCEPT tcp -- anywhere anywhere tcp spt:ssh ACCEPT tcp -- anywhere anywhere tcp spt:smtp ACCEPT tcp -- anywhere anywhere tcp spt:pop3 ACCEPT tcp -- anywhere anywhere tcp spt:domain ACCEPT udp -- anywhere anywhere udp spt:domain ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp spt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp spt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp spt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain My rules seems to be OK but there is no connection to 1935 port using a browser. I can connect to this port with SSH (typing "wget myServerIP:1935") but maybe this is because it is an SSH tunelling ? I don't know how to do.

    Read the article

  • Installing gitosis and closed port?

    - by Nicolas GUILLAUME
    I'm trying to install gitosis on a Server (hosted by OVH and running Ubuntu server 11.04). I've done it a few times and never had any problems. But this time I have something very wired when I simply try to clone gitosis. [root@ovks-1:~/]#git clone git://eagain.net/gitosis.git Cloning into gitosis... eagain.net[0: 208.78.102.120]: errno=Connection refused fatal: unable to connect a socket (Connection refused) zsh: exit 128 git clone git://eagain.net/gitosis.git Based on my searches it looks like the port 9418 is closed. But I don't understand, a server by definition shouldn't have any closed port and I can't find a way to see if they are. So how can I check is a port is open and how can I open it if closed? Thank you for your help. Requested by WesleyDavid: iptables -L result [root@odeoos-vks-1:~/]#iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have no idea what it means... Thanks :)

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • Yum Update Failing mod_ssl and glibc_devel

    - by Kerry
    Any ideas on how to get this to not fail? # yum update Freeing read locks for locker 0x82: 4189/140342084876032 Freeing read locks for locker 0x84: 4189/140342084876032 Freeing read locks for locker 0x85: 4189/140342084876032 Freeing read locks for locker 0x86: 4189/140342084876032 Freeing read locks for locker 0x87: 4189/140342084876032 Freeing read locks for locker 0x9a: 4189/140342084876032 Freeing read locks for locker 0x9c: 4189/140342084876032 Freeing read locks for locker 0x9d: 4189/140342084876032 Freeing read locks for locker 0x9e: 4189/140342084876032 Freeing read locks for locker 0x9f: 4189/140342084876032 Freeing read locks for locker 0xa0: 4189/140342084876032 Freeing read locks for locker 0xa1: 4189/140342084876032 Freeing read locks for locker 0xa2: 4189/140342084876032 Freeing read locks for locker 0xa3: 4189/140342084876032 Freeing read locks for locker 0xa4: 4189/140342084876032 Freeing read locks for locker 0xa5: 4189/140342084876032 Freeing read locks for locker 0xa6: 4189/140342084876032 Freeing read locks for locker 0xa7: 4189/140342084876032 Freeing read locks for locker 0xa8: 4189/140342084876032 Freeing read locks for locker 0xa9: 4189/140342084876032 Freeing read locks for locker 0xaa: 4189/140342084876032 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Update Process Resolving Dependencies There are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them. The program yum-complete-transaction is found in the yum-utils package. --> Running transaction check ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-2.el6 will be updated ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-4.el6_5 will be an update ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update ---> Package kernel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package kernel-devel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.1 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.3 will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64 UPDATE I installed and ran yum-complete-transaction as requested, it finished some things and suggested I run package-cleanup --problems, which yielded this: package-cleanup --problems Loaded plugins: fastestmirror Package httpd-manual-2.2.15-30.el6.centos.noarch requires httpd = ('0', '2.2.15', '30.el6.centos') Package httpd-2.2.15-29.el6.centos.x86_64 requires httpd-tools = ('0', '2.2.15', '29.el6.centos') Package mod_ssl-2.2.15-30.el6.centos.x86_64 requires httpd = ('0', '2.2.15', '30.el6.centos') Package glibc-devel-2.12-1.132.el6_5.2.x86_64 requires glibc-headers = ('0', '2.12', '1.132.el6_5.2') I'm definitely not a sys-admin, what would be the next step? UPDATE 2 I ran yum distro-sync: # yum distro-sync Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Distribution Synchronization Process Resolving Dependencies --> Running transaction check ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64

    Read the article

  • Why are UDP messages from outside the network received but not delivered?

    - by Warren Pena
    I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

    Read the article

  • How does SELinux affect the /home directory?

    - by Matt Solnit
    Hi everyone. I'm migrating a CentOS 5.3 system from MySQL to PostgreSQL. The way our machine is set up is that the biggest disk partition is mounted to /home. This is out of my control and is managed by the hosting provider. Anyway, we obviously want the database files to be on /home for this reason. With MySQL, we did the following: Edited my.cnf and changed the datadir setting to /home/mysql Added a new "File type" policy record (I hope I'm using the right terminology) to set /home/mysql(/.*)? to mysqld_db_t Ran restorecon -R /home/mysql to assign the labels and everything was good. With PostgreSQL, however, I did the following: Edited /etc/init.d/postgresql and changed the PGDATA and PGLOG variables to /home/pgsql/data and /home/pgsql/pgstartup.log, respectively Added a new policy record to set /home/pgsql/pgstartup.log to postgresql_log_t Added a new policy record to set /home/pgsql/data(/.*)? to postgresql_db_t Ran restorecon -R /home/pgsql to assign the labels At this point, I still cannot start PostgreSQL. pgstartup.log says: # cat pgstartup.log postmaster cannot access the server configuration file "/home/pgsql/data/postgresql.conf": Permission denied The weird thing is that I don't see any messages related to this in /var/log/messages or /var/log/secure, but if I turn off SElinux, then everything works. I made sure all the permissions are correct (600 for files and 700 for directories), as well as the ownership (postgres:postgres). Can anyone tell me what I am doing wrong? I'm using the Yum repository from commandprompt.com, version 8.3.7. EDIT: The reason my question specifically mentions the /home directory is that if I go through all these steps for any other directory, e.g. /var/lib/pgsql2 or /usr/local/pgsql, then it works as expected.

    Read the article

  • Secure iptables config for Samba

    - by Eric
    I'm trying to setup an iptables config such that outbound connections from my CentOS 6.2 server are allowed ONLY if they are of state ESTABLISHED. Currently, the following setup is working great for sshd, but all the Samba rules get totally ignored for a reason I cannot figure out. iptables Bash script to setup ALL rules: # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -s 10.1.1.0/24 -p udp --dport 137:138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -d 10.1.1.0/24 -p udp --sport 137:138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -s 10.1.1.0/24 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -d 10.1.1.0/24 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT # Enable these rules service iptables restart iptables rule list after running the above script: [root@repoman ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:22222 state NEW,ESTABLISHED Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:22222 state ESTABLISHED Ultimately, I'm trying to restrict Samba the same way I have done for sshd. In addition, I'm trying to restrict connections to the following IP address range: 10.1.1.12 - 10.1.1.19 Can you guys offer some pointers or possibly even a full-blown solution? I've read man iptables quite extensively, so I'm not sure why the Samba rules are getting thrown out. Additionally, removing the -s 10.1.1.0/24 flags don't change the fact the rules get ignored.

    Read the article

  • KVM Guest with NAT + Bridged networking

    - by Daniel
    I currently have a few KVM Guests on a dedicated server with bridged networking (this works) and i can successfully ping the outside ips i assign via ifconfig (in the guest). However, due to the fact i only have 5 public ipv4 ip addresses, i would like to port forward services like so: hostip:port - kvm_guest:port UPDATE I found out KVM comes with a "default" NAT interface, so added the virtual NIC to the Guest virsh configuration then configured it in the Guest, it has the ip address: 192.168.122.112 I can successfully ping 192.168.122.112 and access all ports on 192.168.122.112 from the KVM Host, so i tried to port forward like so: iptables -t nat -I PREROUTING -p tcp --dport 5222 -j DNAT --to-destination 192.168.122.112:2521 iptables -I FORWARD -m state -d 192.168.122.0/24 --state NEW,RELATED,ESTABLISHED -j ACCEPT telnet KVM_HOST_IP 5222 just hangs on "trying" telnet 192.168.122.112 2521 works [root@node1 ~]# tcpdump port 5222 tcpdump: WARNING: eth0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:43:47.216181 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445777813 ecr 0,sackOK,eol], length 0 23:43:48.315747 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445778912 ecr 0,sackOK,eol], length 0 23:43:49.415606 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445780010 ecr 0,sackOK,eol], length 0 7 packets received by filter 0 packets dropped by kernel [root@node1 ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state NEW,RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination All help is appreciated. Thanks.

    Read the article

  • Dell PE2950 - slow IO rates for writing and reading locally

    - by OrenM
    I'm having a serious issue with dell server PE2950. The server has really slow IO rates, so slow that I'm not able to use it anymore I tried few things to solve this: changing disks to new disks (configured them as raid1) changing perc card + perc cables reinstalling the OS of course, had to cause of changing of disks, centos 5.5 x64bit firmware update to everything virtual disks policy: No Read Ahead,Write Back, disk cache policy disabled. openmanage doesn't alert about anything, also i ran dell's diag tests, everything passed, also dell didn't see anything in deset log. dell offered to reseat everything, including the cpu, we did that as well, still io rates are slow I have several PE2950 servers, and I never had such a thing with any of those. All have similar or exact hardware as this one, all configured the same, with the same os centos 5.5 x64, same disks, same raid, same policy. Just for comparison: the problematic PE2950 server: [root@bad ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 27.7946 seconds, 58.9 MB/s real 0m33.968s user 0m0.531s sys 0m26.000s good PE2950 server (with the exact same hardware): [root@good ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 3.19999 seconds, 512 MB/s real 0m7.694s user 0m0.053s sys 0m4.057s Hopefully you will have an idea what can cause the problem.

    Read the article

  • Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

    - by Oskar Kjellin
    I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

    Read the article

  • netconfig won't change DNS on opensuse 12.2

    - by Krystian
    I'm trying to update my dns servers after openvpn connection, but netconfig won't do that for me. Here's how I'm trying to do it [manually now]: /sbin/netconfig modify -v -i tap0 -s openvpn <<-EOF INTERFACE='tap0' DNSSERVERS='10.10.0.1' EOF And here's the verbose output: debug: lockfile created (/var/run/netconfig.pid) for PID 5530 debug: lockfile created debug: write new STATE file /var/run/netconfig//tap0/netconfig0 debug: Module order: dns-resolver dns-bind dns-dnsmasq nis ntp-runtime debug: dns-resolver module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_dns_settings: service 'NetworkManager' => rank '1' debug: get_dns_settings: DNS_SEARCHLIST_1='mydomain.com' debug: get_dns_settings: DNS_SERVERS_1='192.168.0.1' debug: exit get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: write_resolv_conf: ' mydomain.com ' ' 192.168.0.1 ' debug: No changes for /etc/resolv.conf debug: dns-bind Module called debug: dns-dnsmasq Module called debug: nis Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: exit get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: set_nisdomainname: eth0 24 debug: set_nisdomainname: => yes debug: set_nisdomainname: old[]=, new[24]= debug: format_yp_conf called with : debug: Using static fallback debug: format_static[0] called debug: No changes for /etc/yp.conf debug: nis domainname '' is up to date debug: ntp-runtime Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_ntp_settings: NTP_SERVER_LIST='' debug: exit get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig I've been trying to find something relevant on the web, but failed to do so. I have no other clue on how to progress with this issue. Any thoughts?

    Read the article

  • Windows 7 Users unable to add Windows 2003 server printers

    - by TravBrack
    Hi there I just rolled out a few Windows 7 x64 machines and ran into this issue where non-admin users are unable to add printers hosted on a windows 2003 server. It works fine on a 2008 server. The issue appears to be with the point and print system. A user will attempt to add the printer, a prompt will come up requiring the user to elevate privileges in order to install a driver, and will fail citing 'access denied'. I found the group policy setting Point and Print Restrictions: When the policy setting is disabled: -Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print. So I disabled it, verified that the policy was being picked up using rsop, but it still does the same thing. I've also tried the following: Recreating the printers using newer drivers Adding the printer using 32 bit drivers on the 2003 machine, then adding the 64 bit drivers on a Windows 7 machine Adding the printer from a windows 7 machine using print management None of these things work. The security settings are no different than the working printers. Help?

    Read the article

  • OpenVPN Client timing out

    - by Austin
    I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

    Read the article

  • Can access SSH but can't access cPanel web server

    - by Tom
    I've built a Cent OS 6.0 vps and then i've installed the latest cPanel/WHM. This isn't my first installation but i've noticed something weird especially that i've never used the 6.0 version.. when i tried to install cPanel, it didn't recognize wget so installed it, then cPanel said that Perl isn't installed, i've installed that and the installation went well since then. Now, when i've tried to access the server via the browser with the IP Adress as i've used to, it didn't work, it was just loading forever, i tried the 2087 port, still the same. but SSH works. I've also tried the commands to start the server manually but none of them worked. How to fix that? Edit: iptables -nL Result root@server [~]# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 Chain acctboth (2 references) target prot opt source destination tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:80 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:80 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:25 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:25 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:110 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:110 icmp -- 216.119.149.168 0.0.0.0/0 icmp -- 0.0.0.0/0 216.119.149.168 tcp -- 216.119.149.168 0.0.0.0/0 tcp -- 0.0.0.0/0 216.119.149.168 udp -- 216.119.149.168 0.0.0.0/0 udp -- 0.0.0.0/0 216.119.149.168 all -- 216.119.149.168 0.0.0.0/0 all -- 0.0.0.0/0 216.119.149.168 all -- 0.0.0.0/0 0.0.0.0/0

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >