Search Results

Search found 10945 results on 438 pages for 'ms office'.

Page 370/438 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• Client unable to access OWA website after temporarily changing SSL certificate on the server

  - by Lorenz Meyer

  I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

  Read the article

• Any dangers in using DDR memory with a higher frequency than the FSB?

  - by raw_noob

  I'm looking to upgrade memory in an older motherboard. The processor is an AMD Sempron 2500+ with a maximum speed of 333/166MHz. The motherboard is an MSI MS-7061 (KV3M-V), which accepts up to 2Gb of DDR memory maximum PC2700 in 2 slots and has a maximum FSB of 333MHz. The board does not have dual-channel support. Existing memory includes a stick of 512Mb PC3200, which seems to be running OK (presumably at PC2700) but is rated 200MHz, which is below the FSB speed. The other stick is 256Mb PC2100/133MHz, again below the FSB speed. (All figures from CPU-Z.) I have a chance to acquire a single used stick of PC3200/400MHz memory very cheaply. Crucial's system scanner seems to suggest that this will be OK with my system, but other sites have suggested that running memory with a higher frequency than the FSB can cause instability. Is this true? Would I be better waiting until I can buy the correct PC2700/333MHz stick? I'm assuming that the mixed memory I have at present is running as 768Mb at 133MHz. Is this a reasonable assumption? If so, would you expect the performance differences between 768Mb/133MHz and 1Gb/333MHz to be very noticeable? If I install the new 1Gb/400 or 333MHz stick in slot 1, am I right in thinking that adding back the existing 512Mb/200MHz stick in slot 2 would pull the whole 1.5Gb system memory speed down to 200MHz? If so, which would be better - 1.5Gb/200MHz, or the single 1Gb stick at the full 333MHz that the FSB permits? Is more headroom more important than extra speed? Any help - or even opinions - gratefully received. I can't find reliable information, and I can't afford to make expensive mistakes.

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

  - by Josh Stodola

  So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

  Read the article

• How to download large files when the download size is restricted ?

  - by Rahul

  ? In my office, the network admin has restricted the download limit to a size of 1.8MB for any file. This is for sub ordinates accounts only. But for my manager's PC, there are no restrictions. Is there any way to download files from my PC by using my managers' ip address. I just tried using his ip on my pc but, had the same problem. ? Earlier I was given access to our Linux server from my pc using putty. Then I used to download large files on to the server and then transfer from server to my machine using fire ftp. This transfer worked perfectly fine. But, now I don't have any access to the server. So can I be able to download large files using fire ftp from my own PC ? I'm using Windows XP machine. Please suggest a solution by any possible combination. Thanks.

  Read the article

• Compaq Motherboard gives "CPU Fan Error"

  - by John

  I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

  Read the article

• Copying windows home server backup offsite

  - by Simon

  What ways are there to copy a windows home server backup to an offsite location? I'm talking specifically (and only) about the automated backup of my entire machine, and not the shared network folders. I am 90% working away from home on my laptop which has a 640GB drive so the shared folders are essentially useless to me. I backup every night, but if my house burns down or broken into the I'm in serious serious trouble ! I'm really looking for some alternative way to back up my entire machine - which much not interfere with the reliability or speed by which my WHS backs up my laptop every night. Either a way to 'export' a complete machine backup from the server, or recommendations on non-conflicting software I can backup to a 1TB drive at work are what I'm looking for. Note: I believe that WHS uses its own completely proprietary backup and doesn't use things like any 'backup bit' or 'archive bit'. I just dont want to install some other backup software that will conflict. PS I'm now running Windows 7 and just realized that I should probably check out the backup functionality it gives me. I assume that won't conflict right! Edit: Thanks for the hosted solutions. I'd also appreciate ways to backup to an 'offsite' location that I control - like my office vs. my home. The hosted solutions I think will be too slow or expensive for my needs.

  Read the article

• Virtualize SBS 2003 - P2V vs migrating to new VM

  - by jlehtinen

  I need to virtualize a SBS 2003 server in my work environment. I need some tips on what people think is the best way to proceed. Background: The SBS 2003 server is the primary DC for the domain and also hosts FTP, RRAS(VPN), DNS, and file shares. Exchange is NOT used, neither is SQL server. DHCP is done via a firewall appliance. I have added a Server 2003 VM to the domain and promoted it to the DC role. AD/DNS is replicating here correctly. This was mainly done to provide fault-tolerance to the domain, I was not intending to make this VM the primary DC. I've already asked about buying upgraded licensing for Server 2008/2012 but was refused due to cost. Options: I see (at least) two routes I could take to complete this. From what I've read option 2 is the "preferred" method, but there's a few steps where I'm not clear on what to expect. Option 1.) P2V the primary DC Power off primary DC Power off secondary DC (to prevent USN rollback in case P2V has issue) P2V (cold clone) primary DC Boot new PDC VM Allow new hardware to detect Remove old NIC hardware from device manager Assign old IPs to new virtual NICs Reboot PDC VM, confirm connectivity and no major issues Power on secondary DC, confirm replication Option 2.) Create new VM, transfer roles, remove original DC from domain Create new VM, install SBS 2003 Do I need the original SBS install discs for this? MS migration doc mentions this. Add VM to domain, promote to DC role Does this start 7 day timer where two SBS servers can be in same domain? Set up RRAS on new VM Set up IIS/FTP on new VM Move file shares to new VM Transfer FSMO roles to new VM DC dcpromo original primary DC out of domain

  Read the article

• Strange problem with Google Mail and IMAP on Outlook 2007

  - by Alex C.

  I work for a small non-profit organization. We have about 35 administrative employees who use e-mail. We're on a Windows network with a domain. Everyone is running XP Pro and Office 2007 with all updates/patches. We used to use POP3 mail through a local provider. However, we recently signed-up for a free Google Apps account, and we switched to IMAP mail through Google. Everyone uses Outlook 2007 as the client. For about ten days, everything was working fine. Yesterday afternoon, we suddenly developed a strange and annoying problem. Every time you send an e-mail message, a copy of your outgoing message shows up in your inbox. It's as if you're adding your own address to the CC: line of every message. Nothing has changed on our end. I was hoping that the problem was a temporary glitch that would resolve itself, but here we are about 24 hours later, and it's still happening. I searched Twitter, and there were a handful of vague messages about issues with Google mail and IMAP, but I didn't see any references to this specific problem. Any thoughts on what's going on here and how to fix it?

  Read the article

• sharepoint crawl not indexing main site

  - by user22215

  Guys I'm having some strange search issues' going on with my main portal application. First off let me give you a little back ground on the problem web app. Our Sharepoint environment was originally set up by a consultant that did not follow best practices. She used one web app to house our companies' intranet site, ssp, and mysites. Since than I have provisioned a new ssp that I have segmented correctly I moved all of our other sites over to the new ssp with out any problems . However, I could not assign the main portal app to the new ssp since the portal app housed the ssp site collection. So I deleted the ssp site collection after that I deleted the ssp and assigned the portal app to my new ssp. Now this is where the problem starts when I attempt to crawl this application the crawl starts than stops 5 seconds later with a status of success also it reports that 1 item was successfully crawled. The funny thing is the main portal app has nearly 30000 items. I have tracked the problem down to the web app if I create a test web app than restore the content I have no problem crawling all 30000 items. Also all of my other web apps that use the same ssp have no problem completing crawls. I don't see anything in the ULS logs or server 2003's event viewer. Also I'm using a separate dedicated index server that's configured to crawl itself via host file configuration. I would like to fix this problem with out having to recreate our main portal site due to the fact that we have several custom code modifications where DLL's were registered to the IIS bin folder also I don't even want to get into the Silverlight mods that were done. Any help with this problem is much appreciated Same problem as minehttp://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_23885820.html

  Read the article

• Route return traffic to correct gateway depending on service

  - by Marnix van Valen

  On my office network I have two internet connections and one CentOS server running a website (HTTPS on port 443). The website should be publicly accessible through the public IP of the first internet connection (ISP-1). The other internet connection, ISP-2, id the default gateway on the network. Both internet connections have routers (the household-kind) with NAT, SPI firewalls etc. The router on ISP-2 is a Netgear WNDR3700 (aka N600) with original firmware. The problem is that the website is unreachable. Looks like incoming traffic on ISP-1 will reach the server but the returning traffic is routed through ISP-2, effectively making the site unreachable. As far as I can tell I can't do port based routing on the WNDR3700. What are my options to make this work? I've been looking at implementing an iptables / routing based solution on the server itself but haven't been able to make that work. Update: Note that the server has one network interface connecting it to both routers.

  Read the article

• User-unique .vimrc file for servers as root user

  - by Scott

  I'm getting thrown into an IDE war at the office, where multiple users have root access on our servers, and like to have everything their own way with VIM. Unfortunately, we have our servers locked down enough to where if you want to do anything, you need to have root access. Obviously (although this is obviously frowned upon), we get tired of typing sudo before each command we type, which would require that we constantly type in our wonderfully complex passwords that are mandated on us over and over again, so naturally we all just execute the sudo su - command upon login to avoid all of this. Of course, when it comes to VIM and custom .vimrc files, we are often times stepping on someone else's custom .vimrc file, and we have some whacked out functionality in these files that users have that may overwrite functionality that we have no idea about, much less have the patience to learn either. When as root on a linux box, is there any way for all of us to still maintain our .vimrc file without having to overwrite the file over and over again every time someone wants to use VIM? Ideally, we have many virtual machines all with VIM installed, so a universal solution across all servers would be best, and we do have our Microsoft Windows user specific home directories mounted on the servers under /home/username. Any recommendations for accommodating this?

  Read the article

• Log shipping on select tables.

  - by Scott Chamberlain

  I know I am most likely using incorrect terminology so please correct me if I use the wrong terms so I can search better. We have a very large database at a client's site and we would like to have up to date copies of some of the tables sent across the internet to our servers at our office. We would like to only copy a few of the tables because the bandwidth requirement to do log shipping of the entire database (our current solution) is too high. Also replication directly to our servers is out of the question as our servers are not accessible from the internet and management does not want to do replication (more on that later). One possible Idea we had is to do some form of replication on the tables we need to another database on the same server and do log shipping of that second smaller database but management is concerned that the clients have broken replication (it was between two servers on their internal network however) on us in the past and would like to stay away from it if possible. Any recommendations would be greatly appreciated. If using some form of replication is the only solution, I am not against replication, I just need compelling arguments to convince management to do it. This is to be set up on multiple sites that are running either Sql2005 or Sql2008 we will have both versions on our end to restore the data to so that is not a issue. Thank you.

  Read the article

• Known USB 2.0 devices don't install driver, but must be manually forced

  - by Darragh

  When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

  Read the article

• Active Directory: how to be SURE users can change their own passwords?

  - by Latro

  Working on some project where a tool we have has to authenticate against AD connecting via LDAPS and perform password changes if required or requested. IN THEORY, the tool does that, and we have seen it work in other projects. IN PRACTICE, against this particular directory, it fails. Been driving me crazy. The particulars of the situation: Windows 2003 AD Defined a "technical user" for the LDAP connection with rights to change users passwords When password change is required - in this case, because pwdLastSet is 0 - the tool uses the technical account to go, bind to the controller and change the user password. If password change is not required but the user request it, then the bind is done with the user account. That last condition is the one that doesnt work. With the technical user the password change is possible, but with the user itself, it isnt. We get an error like this: LDAP access failed: javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 19 - 0000052D: AtrErr: DSID-03190F00, #1: 0: 0000052D: DSID-03190F00, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9005a (unicodePwd) no idea what DSID-03190F00 means cause it doesnt seem to be anywhere in google :-/ Been looking at several MS documentation pages and frankly, I'm not understanding one bit of it. There is some "control access right" called User-Change-Password that may, or may not, control what objects have the right to change their own password, which may, or may not, have to do with ACE and ACLs... There is GPO. There is maybe the password policy but it is only set to ask for passwords of 6 chars or more... Can anybody explain to me in easy-to-check steps how can I go and tell the AD admin guy (who is as lost as me) what to do to ensure that users in the AD directory (objectClass top,person,organizationalPerson and user) are able to change their own passwords by themselves? Thanks in advance

  Read the article

• Windows VPN always disconnects after < 3 minutes, only from my network

  - by hemp

  First, this problem has existed for almost two years. Until serverfault was born, I pretty much gave up on solving it - but now, hope is reborn! I've set up a Windows 2003 server as a domain controller and VPN server at a remote office. I am able to connect to and work over the VPN from every windows client I've tried, including XP, Vista, and Windows 7 without issue, from at least five different networks (corporate and home, domain and non.) It works fine from all of them. However, whenever I connect from clients on my home network, the connection drops (silently) after 3 minutes or less. After a short while, it will eventually tell me the connection has dropped and attempt to redial/reconnect (if I've configured the client that way.) If I reconnect, the connection will re-establish and appear to work correctly, but again will silently drop, this time after a seemingly shorter time period. These are not intermittent drops. It happens every single time, in exactly the same way. The only variable is how long the connection survives. It doesn't matter what type of traffic I send. I can sit idle, send continuous pings, RDP, transfer files, all of that at once - it makes no difference. The result is always the same. Connected for a few minutes, then silent death. Since I doubt anyone has experienced this exact situation, what steps can I take to troubleshoot my evanescing VPN?

  Read the article

• How to backup a large FreeNAS?

  - by Ze'ev

  We have a 12TB FreeNAS box in the office, and are looking for a way to keep a backup of it offsite. We're considering (1) tape; (2) a bunch of bare drives (popped into a spare hotswap bay); (3) external drives. Any advice on which solution is best? (Online backup is not an option because our internet connection is too slow.) And, is there some software that will keep track of which files have been backed up and which haven't? So that when one backup unit fills up, we can continue the backup on the next? (We don't want to have to back up to a 12TB device.) This software could run, preferably, on the NAS itself; or from one of our Mac clients. Our goal is a situation where we attach some backup device; it automatically fills up with stuff from the server; the contents of this unit are catalogued somewhere something prompts us to replace with a fresh drive/tape; backup continues until full, including any files that have changed since being backed up.

  Read the article

• How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

  - by Pascal Qyy

  I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

  Read the article

• RAID 10 or RAID 5 for multiple VMs - what is the best choice?

  - by Lars Fastrup

  I have just ordered a new rig for my business. We do a lot of software development for Microsoft SharePoint and need the rig to run several virtual machines for development and test purposes. We will be using the free VMware ESXi for virtualization. For a start, we plan to build and start the following VMs - all with Windows Server 2008 R2 x64: Active Directory server MS SQL Server 2008 R2 Automated Build Server SharePoint 2010 Server for hosting our public Web site and our internal Intranet for a few people. The load on this server is going to be quite insignificant. 2xSharePoint 2007 development server 2xSharePoint 2010 development server Beyond that we will need to build several SharePoint farms for testing purposes. These VMs will only be started when needed. The specs of the new rig is: Dell R610 rack server 2xIntel XEON E5620 48GB RAM 6x146GB SAS drives Dell H700 RAID controller We believe the new server is going to make our VMs perform a lot better than our existing setup (2xIntel XEON, 16GB RAM, 2x500 GB SATA in RAID 1). But we are not sure about the RAID level for the new rig. Should we go for having the the 6x146GB SAS drives in a RAID 10 configuration or a RAID 5 configuration? RAID 10 seems to offer better write performance and lower risk of a RAID failure. But it comes at a cost of less drive space. Do we need RAID 10 or would RAID 5 also be a good choice for us?

  Read the article

• Juniper NetScreen NS-5GT traffic monitoring

  - by blah

  I've done casual research into the subject and am truly dismayed at the lack of compatible tools for such a simple task. Maybe someone can provide assistance. We have a NetScreen NS-5GT in the office. I need to be able to get a glance of current traffic per endpoint -- I think the equivalent of 'get sessions' with byte counts/rates. I don't care about bars, graphs, and reports. Something as simple as a classic software firewall display would be perfect. I can't shell out money on something real like SolarWinds products, so a free solution is essential. I'm willing to do a little work but refuse to program something from scratch. It's not prudent right now for me to install a hub or otherwise mess around physically. There must be something out there I can use, maybe in combination. I don't believe I'm asking too much. Specific answers only please, e.g. monitoring software you know will actually work with this antiquated device. I've read about general approaches to the broader problem dozens of times already.

  Read the article

• CIFS Mounting Permissions

  - by malco

  I have an issue that I;m going round in circles with, I hope you can help. The Set up: Server 1 (CIFS Client) - CentOS 6.3 AD integrated uing Samba/Winbind & idmap_ad Server 2 (CIFS Server) - CentOS 6.3 AD integrated uing Samba/Winbind & idmap_ad All users (apart from root) are AD authenticated and this, including groups, etc works happily. What's working: I have created a share on Server 2: [share2] path = /srv/samba/share2 writeable = yes Permissions on the share: drwxrwx---. 2 root domain users 4096 Oct 12 09:21 share2 I can log into a Windows machine as user5 (member of domain users) and everything works as it should, for example: If I create a file it shows the correct permissions and attributes on both the MS and the Linux sides. Where I Fall Down: I mount the share on Server 1 using: # mount //server2/share2 /mnt/share2/ -o username=cifsmount,password=blah,domain=blah Or using fstab: //server2/share2 /mnt/share2 cifs credentials=/blah/.creds 0 0 This mounts fine, but.... If I log su, or log onto server 1 as a normal user (say user5) and try to create a file I get: #touch test touch test touch: cannot touch `test': Permission denied Then if I check the folder the file was created but as the cifsmount user: -rw-r--r--. 1 cifsmount domain users 0 Oct 12 09:21 test I can rename, delete, move or copy stuff around as user5, I just can't create anything, what am I doing wrong? I'm guessing it's something to do with the mount action as when I log onto server2 as user5 and access the folder locally it all works as it should. Can anyone point me in the right direction?

  Read the article

• Goal setting/tracking packages for software projects

  - by Avi

  I'm a developer working by myself. I'm looking for a computerized tool to manage my goals and activities. I own it Microsoft Project, but I don't like it. I've started many "projects" but could never keep on using it. Too complex and heavyweight for me. I use MS-Outlook tasks. They are not what I need. No planning capability. Tracking is not nice. I'm using the Pomodoro technique and I like it, but I'm looking for something more comprehensive and with better computerized support. Something that would allow me to define goals with dependencies and time estimation, keep daily prioritized lists etc. So, I'm looking for a solution. One I've found is GoalPro, but I uneasy because I could not find a cross-product "top ten" like review. Are you using any goal setting package such as GoalPro? Which? Does it help? Pros and Cons?

  Read the article

• Dual-head monitor system Kubuntu 10.04

  - by andrii

  I have a notebook Asus V6X00V with 1400*1050 monitor(name: LVDS) and Dell Monitor 1920*1080 (VGA-0). I want to have a dual monitor system. At MS Windows everything is working fine. During the Kubuntu installation the Dell and the main notebook monitors have a right resolutions(1920*1080 & 1400*1050). But after some stage it have been changed to the 1152*864 for both. Now the right resolution is only during turning off process and when I am using the console. So it shows that system can use this resolutions. The problem is just in a settings. I am using Size & Orientation - System Settings for setting adjustment. Any option that changes resolution for any monitor or changing position(Absolute, Left Of, Right of and so on) cause the color line noise on the screens. I have tried xrandr: xrandr --output LVDS --mode 1400x1050 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1400x0 but have received the same result. I have find out that for example the previous version of Randr(1.2, now I have xrandr 1.3) need a xorg.conf file modification to create a big virtual screen, but kubuntu 10.4 don't have xorg.conf and I don't know should I modify xorg for 1.3 version of xrandr or not. Please help me to solve this problem

  Read the article

• How to view / enumerate / obtain a list of all effective rights / permissions on an Active Directory object?

  - by Laura

  I am new to Server Fault and was hoping to find an answer to a question that I have been struggling with for the past week or so. I have been recently asked by my management to furnish a list of all the effective rights / permissions delegated on the Active Directory object for our Domain Admins group. I initially figured I'd use the Effective Permissions Tab in Active Directory Users and Computers but had two problems with it. The first was that it doesn't seem very accurate and the second was that it requires me to enter the name of a specific user, and it only shows me what it figures are effective permissions for that user. Now, we have more than a 1000 users in our environment so there's no way I can possibly enter 1000 user names one by one. Plus, there is no way to export that information either. I also looked at dsacls from MS but it doesn't do effective permissions. Someone pointed me to a tool called ADUCAdmin but that seems to falsely claim to do effective permissions. Could someone kindly help me find a way to obtain this listing? Basically, I need to generate a list of all the modify effective permissions granted on the Domain Admins group object along with the list of all the admins to which these permissions are granted. In case it helps, I don't need a fancy listing - simple text / CSV output would be enough I would be grateful for any assistance since this is time and security sensitive for us.

  Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >