Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 372/494 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

  • Networking - intermittent, slow speeds

    - by jack
    Hi all I'm a novice when it comes to networking. I live in a large two storey building that used to be a school and we have an internet connection with BT (british telecoms provider), the connection speed is 12Mb.. Basically our connection is slow and very intermittent and I was wondering if anybody here could provide some help or ideas. There are about 11 people in the building who could be online at any time. We have a router on the ground floor which is bog standard supplied by BT. To provide Broadband access to the 1st and 2nd floors, we used an old switch that the school left, we have a cable running from the router on the first floor to the switch which connects to a wireless router which is configured as a bridge on the 2nd floor supplying broadband access to the 1st and 2nd floors. Additionally we have 3 computers that are connected via the switch through the ethernet sockets left by the school on the ground floor. The router we use on the 2nd floor came in a pack of 2 and cost about £15 (bought by another person). Sometimes the connection is perfectly fine, i.e. early hours of the morning or when everybody is out, we have rang BT who say that the connection cannot cope with the numbers of people online, plus I'm not sure whether each person is streaming etc. Can anybody offer any advice?

    Read the article

  • ADO 2.8, VMWare and SQL Server - sudden bulk dropped connections

    - by CodeByMoonlight
    We have an overworked server currently running a single SQL Server 2000 instance on physical hardware, and about 40 different apps interact with it on a daily basis. Last year, the RAID controller failed and we had no spare, so IT Support hurriedly migrated it overnight to a copy running on a VMWare Server. While it was on that server everything ran much quicker due to it being a big improvement in spec. However, the biggest app using it had occasional serious errors which never occurred on physical hardware. Specifically, several times a week it would disconnect batches of users - anywhere from just ten to hundreds at once, and all at the same time. It didn't affect any particular users or PCs or offices - all were affected equally. The only common thing was the app, which is a VB6 app using ADO 2.8 to connect. The other apps connecting to that virtualised instance of SQL Server seemingly had no problems, although they were (and are) responsible for only a tiny fraction of the work involving this server. The upshot is that after about two weeks of loving the speed and hating the random mass disconnections (which we were never able to find a cause for), we sadly took the decision to return to physical hardware and the disconnections vanished. Now we've reached the point where the old server just can't handle all that's being asked of it, and we're intending to migrate everything to 2 or more other servers. The snag is that there's a good chance they'll have to be virtual ones again. Given what happened last time, I'm trying to find out what possible reasons there could be for these mass disconnections. We were running VMWare ESX, but the network is Novell-based. Also, the server had a linked server setup to connect to an Informix server using a known-to-be-buggy ODBC driver, and this is used throughout the day. Any ideas on the cause(s)?

    Read the article

  • graphics performance better on battery?

    - by Scott Beeson
    Anyone have any idea why my laptop would perform (considerably) better while on battery than while plugged in? It's a Dell Latitude E6420 with Windows 8 Pro. I tried mirroring all the settings in the selected power plan from "On battery" to "Plugged In" and that didn't help. I then just restored the defaults for all power plans (balanced and high performance). I'm still seeing the same results. The best example where it is most noticeable (don't laugh) is Sim City Social in Chrome. I'm probably seeing a performance increase of 5x on battery versus plugged in. This is easily reproducible too. I'm very confused. Could it be caused by dust? The laptop isn't that old and there is no visible dust. I'm not going to take it apart to check the insides as it's a corporate laptop. Could it be overheating? Battery Sim City Social: 68 degrees max Civ V: 77 degrees max Charger Sim City Social: 68 Civ V: did not test See answer below... I'm retarded

    Read the article

  • Windows XP restarting repeatedly after a fresh restore

    - by DWilliams
    I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

    Read the article

  • Configure Cisco Pix 515 with DMZ and no NAT

    - by Rickard
    I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

    Read the article

  • MSSQLSERVER Will Not Start - Event ID 913 and 1814

    - by ThaKidd
    Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

    Read the article

  • UAC being turned off once a day on Windows 7

    - by Mehper C. Palavuzlar
    I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

    Read the article

  • PostgreSQL 8.4 - Tablespace Optimization

    - by FloE
    I'm currently running a PostgreSQL Database with about 1.5 billion rows / 500 GB of data (including indices). There are several schemata: on for the (read only, irregular changes / updates) 'core-model' and one for every user (about 20 persons). The users can access the core and store data in their own schema, so everything is located in one database. The server runs with CentOS and PostgreSQL 8.4 and is used for scientific studies, exploration etc and is running quite well. These days an upgrade of the DB storage hard disks arrive - all with the same performance as the old ones. I'm looking for the best way to distribute the data on these disks. It would be possible to separate frequently used objects (the core-data) from the user schemata, but I'm not sure if this is really worth the effort. It seems to be a much better idea to move the WAL files (pg_xlog directory) to its own partition. http://www.postgresql.org/docs/8.4/static/wal-internals.html What are your opinions? Are there any tablespace- or partitioning-related performance documentations / benchmarks?

    Read the article

  • Acer LCD says "no signal"

    - by Ken
    I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

    Read the article

  • How to force a login for an administrator when using Remote Desktop Connection and fast user switching enabled?

    - by brett rogers
    Scenario: I am at work. I want to remote desktop into my machine at home. Problem is, my 5-year-old daughter is playing games on Starfall.com (or something similar) on her (non-admin) account. When I attempt to connect I see this message: Another user is currently logged on to this computer. If you continue, this user has to disconnect from this computer. Do you want to continue? I click Yes and then see Please wait for 'UserName' to respond This presents my daughter with an Allow/Disallow dialog on whether to let me connect. She clicks Disallow (or No or whatever it says) and then I see 'UserName' has denied your request Question: How can I force my account to log in and disconnect her session? Additional Info: My account is an administrator account. My daughter's account is a non-administrator account. Home machine is Windows 7 Pro with fast user switching enabled. Turning off fast user switching is not an option (Kyle pointed out in his answer that turning it off would allow the admin to force another user off). I would keep fast user switching's ability to change accounts without closing the previous account's session over being able to force myself to connect.

    Read the article

  • No signal on monitor after plug it to a linux box

    - by yaroot
    I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

    Read the article

  • How to configure router to give XBox top priority / most bandwidth?

    - by MrSparky
    Hi all - Newbie here so go easy... and apologies in advance if I blow the community etiquette / rules! Here's what I'm trying to do: I have a "D-Link DIR-655 Extreme N" wireless router and an XBox 360 w/ the old-style wireless connection thing (usb attachment)... I want to configure my router / network to give my XBox as much bandwidth as it wants, whenever it wants. I have tried giving the XBox a unique IP (within my network) and then tweaking the router to treat that IP as a top priority application (using the router's QOS stuff). Problem is whenever I turn off the xbox, I can't connect to the network the next time I start it up. It seems the only reliable setting in the XBox is to use "Automatic" for the IP settings within the Network Configuration area. Supposedly the D-Link ships with default settings that attempt to recognize a game console and give it top priority... but i've not seen good results (lots of stuttering / lag when someone else jumps online, etc). Any suggestions? thanks again!

    Read the article

  • Cannot build digiKam

    - by Tichomir Mitkov
    I'm trying to compile digiKam 2.8.0. I have installed the required libraries but cMake seems to stuck without any meaningful reason. Here is the output of cMake: $ cmake -DCMAKE_BUILD_TYPE=relwithdebinfo -DCMAKE_INSTALL_PREFIX=/usr/local . -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Found KDE 4.6 include dir: /usr/include -- Found KDE 4.6 library dir: /usr/lib64 -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- Local kdegraphics libraries will be compiled... YES -- Handbooks will be compiled..................... YES -- Extract translations files..................... NO -- Translations will be compiled.................. YES -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libmediawiki ----------------------------------------------------------------------------- -- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. ----------------------------------------------------------------------------- * QJSON - Qt library for handling JSON data ----------------------------------------------------------------------------- -- Congratulations! All external packages have been found. ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkgeomap -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- kexiv2 found, the demo application will be compiled. -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkface -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- First try at finding OpenCV... -- Great, found OpenCV on the first try. -- OpenCV Root directory is /usr/share/opencv -- External libface was not found, use internal version instead... -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: kipi-plugins -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): extra/kipi-plugins/CMakeLists.txt:123 (FIND_PACKAGE) -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi CMake Warning at extra/kipi-plugins/CMakeLists.txt:139 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- Found GObject libraries: /usr/lib64/libgobject-2.0.so;/usr/lib64/libgmodule-2.0.so;/usr/lib64/libgthread-2.0.so;/usr/lib64/libglib-2.0.so -- Found GObject includes : /usr/include/glib-2.0/gobject -- Check for Ksane library in local sub-folder... -- Found Ksane library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libksane -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- Check Mediawiki library in local sub-folder... -- Found Mediawiki library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libmediawiki -- Check Vkontakte library in local sub-folder... -- Found Vkontakte library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkvkontakte -- Boost version: 1.38.0 -- libkgeomap: Found version 2.0.0 -- Found X11: /usr/lib64/libX11.so -- CMake version: cmake version 2.8.9 -- CMake version (cleaned): cmake version 2.8.9 -- -- ---------------------------------------------------------------------------------- -- kipi-plugins 2.8.0 dependencies results <http://www.digikam.org> -- -- libjpeg library found.................... YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libxml2 library found.................... YES (optional) -- libxslt library found.................... YES (optional) -- libexpat library found................... YES (optional) -- native threads support library found..... YES (optional) -- libopengl library found.................. YES (optional) -- Qt4 OpenGL module found.................. YES -- libopencv library found.................. YES (optional) -- QJson library found...................... YES (optional) -- libgpod library found.................... YES (optional) -- Gdk library found........................ YES (optional) -- libkdepim library found.................. YES (optional) -- qca2 library found....................... YES (optional) -- libkgeomap library found................. YES (optional) -- libmediawiki library found............... YES (optional) -- libkvkontakte library found.............. YES (optional) -- boost library found...................... YES (optional) -- OpenMP library found..................... YES (optional) -- libX11 library found..................... YES (optional) -- libksane library found................... YES (optional) -- -- kipi-plugins will be compiled............ YES -- Shwup will be compiled................... YES (optional) -- YandexFotki will be compiled............. YES (optional) -- HtmlExport will be compiled.............. YES (optional) -- AdvancedSlideshow will be compiled....... YES (optional) -- ImageViewer will be compiled............. YES (optional) -- AcquireImages will be compiled........... YES (optional) -- DNGConverter will be compiled............ YES (optional) -- RemoveRedEyes will be compiled........... YES (optional) -- Debian Screenshots will be compiled...... YES (optional) -- Facebook will be compiled................ YES (optional) -- Imgur will be compiled................... YES (optional) -- VKontakte will be compiled............... YES (optional) -- IpodExport will be compiled.............. YES (optional) -- Calendar will be compiled................ YES (optional) -- GPSSync will be compiled................. YES (optional) -- Mediawiki will be compiled............... YES (optional) -- Panorama will be compiled................ YES (optional) -- ---------------------------------------------------------------------------------- -- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: digiKam -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): core/CMakeLists.txt:156 (FIND_PACKAGE) -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi -- Check Kface library in local sub-folder... -- Found Kface library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkface -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- PGF_INCLUDE_DIRS = /usr/local/include/libpgf -- PGF_INCLUDEDIR = /usr/local/include/libpgf -- PGF_LIBRARIES = pgf -- PGF_LDFLAGS = -L/usr/local/lib;-lpgf -- PGF_CFLAGS = -I/usr/local/include/libpgf -- PGF_VERSION = 6.12.24 -- PGF_CODEC_VERSION_ID = 61224 -- Could NOT find any working clapack installation -- Boost version: 1.38.0 -- Check for LCMS1 availability... -- Found LCMS1: /usr/lib64/liblcms.so /usr/include -- Paralelized PGF codec disabled... -- Identified libjpeg version: 62 -- Found MySQL server executable at: /usr/sbin/mysqld -- Found MySQL install_db executable at: /usr/bin/mysql_install_db CMake Warning at core/CMakeLists.txt:310 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- libkgeomap: Found version 2.0.0 -- Found gphoto2: -L/usr/lib64 -lgphoto2_port;-L/usr/lib64 -lgphoto2 -lgphoto2_port -lm -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- PKGCONFIG() indicates that lqr-1 is not installed (install the package which contains lqr-1.pc if you want to support this feature) -- Could NOT find Lqr-1 (missing: LQR-1_INCLUDE_DIRS LQR-1_LIBRARIES) -- Found SharedDesktopOntologies: /usr/share/ontology -- Found SharedDesktopOntologies: /usr/share/ontology (found version "0.5.0", required is "0.2") -- -- ---------------------------------------------------------------------------------- -- digiKam 2.8.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found..................... YES -- MySQL Server found....................... YES -- MySQL install_db tool found.............. YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libjasper library found.................. YES -- liblcms library found.................... YES -- Boost Graph library found................ YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libkface library found................... YES -- libkgeomap library found................. YES -- libpgf library found..................... YES (optional) -- libclapack library found................. NO (optional - internal version used instead) -- libgphoto2 and libusb libraries found.... YES (optional) -- libkdepimlibs library found.............. YES (optional) -- Nepomuk libraries found.................. YES (optional) -- libglib2 library found................... YES (optional) -- liblqr-1 library found................... NO (optional - internal version used instead) -- liblensfun library found................. YES (optional) -- Doxygen found............................ YES (optional) -- digiKam can be compiled.................. YES -- ---------------------------------------------------------------------------------- -- -- Adjusting compilation flags for GCC version ( 4.5.1 ) -- Configuring incomplete, errors occurred! Actually this line shows a sign of error CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. 'version.h' doesn't exists instead there is a file 'version.h.cmake' I have installed libkdcraw (64-bit) from sources. I'm using OpenSuse

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • Windows Home Server installation fails because it can't find the DVD drive anymore

    - by BBlake
    I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

    Read the article

  • 2000 Server, User can't logon

    - by Mike I
    I hope you can help me. I recently upgraded a workstation at my office (to a whole new machine) and ran into a pretty serious problem. Friday until 5:00 PM, I could access my mail on 2000 Exchange server. When I shut the old workstation down and put in the new workstation, I tried to set up an account. When I put the server name in appropriate field and typed my username and hit check names, my username does not come up. So to troubleshoot, (It also is a SMB server) I try to logon to my file share. (My local credentials are the same as server credientials of user account) When I try to logon to share, I just get the Username/Password screen (Never had gotten that before since credentials are the same) Again, in troubleshooting mode, I try to log on to my user from another workstation. Still can't authenticate via my user. Every other user can authenticate and load up their shares/mailboxes. I have restored Exchange from the backup as of 3 days ago (Thursday) but the exact same issue is still there. I really do not understand what is wrong and what else I can do to troubleshoot. If anyone has some pointers for me, I will surely accept them. Thanks, Mike

    Read the article

  • Will restoring a cPanel account delete irrelevant mysql databases?

    - by user54625
    Long story short: I have many accounts in WHM, many domains. However, most of the MySQL databases for all the sites were created under one user, "admin" (let's say it's admin.com). I recently moved the admin.com account to another web server , and now I need to move it back. I would like to restore this account from a backup made by that web server. However, it only has 3 databases attached to that domain, while the server I'm moving it to has those 3 databases (old DBs that need to be replaced), PLUS all the other databases which are used by other accounts on the server. My question: if I restore the admin.com account, will it delete all the other databases on the account, or will it only replace the 3 DBs it has? I can't take any chances here to delete all those other DBs... If it WOULD delete all those other accounts, how would I go about restoring this account without losing the other data? An easy to way to resolve this situation would be to move the mysql owners to the proper accounts, but alas it doesn't seem that there is a way to do that via WHM.

    Read the article

  • My desktop has started overheating -- how hot is hot?

    - by Jerry
    I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

    Read the article

  • Software mirroring (RAID1) versus "Fake Raid" for new Windows 7 install

    - by kquinn
    I've just ordered two new hard drives for my main desktop and a copy of Windows 7 Professional 64-bit. I'd like to do a clean install of Win7 onto the new drives (leaving my old XP Pro boot partition around for a while in case something goes disastrously wrong, etc.). I want to have them set up in mirrored (RAID-1) mode. My understanding is that Win7 Pro can do software mirroring, but can I set this up directly at install time? If so, how? Note that I'd like the disk to be split into three partitions (OS/Apps&Data/Bulk data), all of which should be mirrored. Would it be better (more reliable or faster) to use my motherboard's hardware RAID support? My motherboard is an older nVidia nForce 680i SLI, which is not the most stable of motherboards, and I'm not sure how trustworthy its RAID1 configuration might be (or if Win7 could even detect and install onto a hardware-mirrored volume). Also, the performance characteristics of RAID1 are rather different than RAID0 or RAID5, and I'm wondering if Win7's software mirroring might actually be faster than hardware RAID1 (for example, I'm more of a Unix admin when I have to wear the sysadmin hat, and I've had great success deploying ZFS; most hardware RAID1 implementations have to read both disks and compare results to look for data errors, but ZFS can read from only one disk in the mirror and just use the built-in checksum, meaning it can have up to 2x the number of reads in-flight, as long as there's no data corruption). Edit: Okay, my question about whether Windows 7 can do software mirroring has been answered, and it can. I'm still unsure whether Windows software RAID or my motherboard's hardware "fake RAID" function is a better choice, though. Remember, I'm only interested in mirroring -- not the more complicated striping or parity operations that generally show the poor performance of crappy motherboard RAID solutions.

    Read the article

  • Hard Drive benchmark values show write very very slow

    - by John
    I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

    Read the article

  • printing parallel over ethernet cable

    - by Crudler
    I have a bit of an interesting challenge :) I have a machine with a parallel printer output, i want it to be able to print instead to a printer in a different room and i know that parallel isnt great over big distances. i found this: http://www.amazon.com/over-Cat5-Extension-Cable-Adapter/dp/B002WJ9S6Y%3FSubscriptionId%3DAKIAINHICTCYYZGJWT4Q%26tag%3Dusbprintercables.net-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB002WJ9S6Y which will let me connect over cat5, but its usb to cat 5. my machine can only output on parallel (its not a computer) so what i was thinking of getting is a parallel(f) to usb and usb to parallel (M) for either side i.e. machine - parallel - usb - cat5 - usb - parallel -printer just seems a bit messy :) suggestions? another thing i would like to try is to get rid of the old school parallel printer and instead use a network based multi function. would this be possible? i.e. machine - parallel -usb - cat5 - ethernet print server - network printer this might be rougher because the machine cannot "know" that we are using a network printer. it can ONLY print to LPT1 Thanks!

    Read the article

  • SuPHP custom php.ini doesn't get read

    - by Mathieu Dumoulin
    Took me about 4 hours to get a FastCGI + SuPHP running off Ubuntu 11.10 and i'm now happy that it works mighty fine except for ONE big problem. Custom php.ini's don't seem to load. I tried changing some options and then firing off a phpinfo() and nothing changes in the phpinfo() which leads me to think that there is definitely a problem with the loading of the configuration file. <IfModule mod_suphp.c> AddHandler x-httpd-php .php <Location /> SuPHP_AddHandler x-httpd-php </Location> suPHP_ConfigPath /home/mdumoulin/Documents/tests/tests suPHP_Engine on </IfModule> As you can see, i took great care in making sure i wasn't referencing the php.ini file itself but the directory of the vhost. In the php.ini located in "/home/mdumoulin/Documents/tests/tests/php.ini", you can find: [PHP] error_reporting = E_ALL & ~E_DEPRECATED & ~E_NOTICE display_errors = Off And the log in /var/log/suphp/suphp.log doesn't contain anything relevant, (only old errors that occured before this post while i was testing suphp... So i'm stumped there, dunno what more i can do! Anyone got an idea? EDIT: FINALY, got time to work on this, i disabled FCGI and only enabled SuPHP but after restarting i still see "Server API: CGI/FastCGI". Is this what i should be getting or not? I believe that it's normal i get CGI since SUPHP works with a CGI... But i'm not too sure anymore...

    Read the article

  • Under which circumstances can a *local* user account access a remote SQL Server with a trusted connection?

    - by Heinzi
    One of our customers has the following configuration: On the domain controller, there's an SQL Server. On his PC (WinXP), he logs on with LocalPC\LocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It works. In SSMS, the connection shows up with the user Domain\Administrator. Firstly, I was surprised that this even works. (My first suspicion was that there is a user with the same name and password in the domain, but there is no user LocalUser in the domain.) Then we tried to reproduce the same behaviour on his new PC, but failed: On his new PC (Win7), he logs on with OtherLocalPC\OtherLocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It fails with the error message Login failed for user ''. The user is not associated with a trusted SQL Server connection. Hence my question: Under which conditions can a non-domain user access a remote SQL Server using Windows Authentication with different credentials? Apparently, it's possible (it works on his old PC), but why? And how can I reproduce it?

    Read the article

  • How to diagnose a hang when creating a new folder in explorer.exe

    - by Jack Ukleja
    I have been having some issues with explorer.exe hanging when I create a new folder. If I use Analyse Wait Chain in the Resource Monitor it says "One or more threads of explorer.exe are waiting to finish network I/O". When I look at the offending thread in Process Explorer it reveals nothing interesting: ntdll.dll!ZwWaitForMultipleObjects+0xa KERNELBASE.dll!GetCurrentThread+0x36 kernel32.dll!WaitForMultipleObjectsEx+0xb3 USER32.dll!PeekMessageW+0x1cd USER32.dll!MsgWaitForMultipleObjectsEx+0x2a USER32.dll!MsgWaitForMultipleObjects+0x20 SHELL32.dll!SHAppBarMessage+0x41e SHELL32.dll!DragAcceptFiles+0x2a3c SHELL32.dll!DragAcceptFiles+0x2a4f SHELL32.dll!Ordinal211+0x124 SHELL32.dll!SHChangeNotification_Unlock+0x12f4 USER32.dll!GetSystemMetrics+0x2b1 USER32.dll!IsDialogMessageW+0x19b USER32.dll!IsDialogMessageW+0x1e1 ntdll.dll!KiUserCallbackDispatcher+0x1f USER32.dll!PeekMessageW+0xba USER32.dll!PeekMessageW+0x89 SHELL32.dll!SHChangeNotification_Unlock+0xd9f SHELL32.dll!Ordinal885+0x1407 SHLWAPI.dll!SHRegGetUSValueW+0x306 kernel32.dll!BaseThreadInitThunk+0xd ntdll.dll!RtlUserThreadStart+0x21 While I was looking at the explorer.exe threads I did notice a fair few that talk about ETW (Event Tracing for Windows) so obviously explorer.exe uses tracing. So I decided to try and user TraceView.exe to try and listen in on the explorer.exe traces. The problem is TraceView requires some difficult-to-come-by stuff... either pdbs, or CTL files, and .TMF files. I tried using the explorer.pdb that comes with the Windows SDK but that did not work. I do not see explorer.exe in the "named providers". And I have no idea where to locate the ctl or .TMF files for explorer.exe. So the question is: Is there a way to view the ETW trace messages from explorer? Or shall I just not bother and go back to the age old technique of disabling every explorer extenion one-by-one in the hope its one of them. (Prefer the former as I like to get to the bottom of things!!)

    Read the article

  • I need scanning software to use with my scanner.

    - by D Connors
    So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

    Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >