Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 375/494 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

  • How (in)secure are cell phones in reality?

    - by Aron Rotteveel
    I was recently re-reading an old Wired article about the Kaminsky DNS Vulnerability and the story behind it. In this article there was a quote that came across a little bit exaggerated to me: "The first thing I want to say to you," Vixie told Kaminsky, trying to contain the flood of feeling, "is never, ever repeat what you just told me over a cell phone." Vixie knew how easy it was to eavesdrop on a cell signal, and he had heard enough to know that he was facing a problem of global significance. If the information were intercepted by the wrong people, the wired world could be held ransom. Hackers could wreak havoc. Billions of dollars were at stake, and Vixie wasn't going to take any risks. When reading this I could not help but feel like it was a bit blown-up and theatrical. Now, I know absolutely nothing about cell phones and the security problems involved, but to my understanding, cell phone security has quite improved over the past few years. So my question is: how insecure are cell phones in reality? Are there any good articles that dig a bit deeper into this matter?

    Read the article

  • IIS permission configuration issue

    - by Dan
    Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

    Read the article

  • Cacti is ignoring hash marks in interface aliases

    - by Matt Simmons
    I'm attempting to set up Cacti to monitor a router's interfaces, and I'm having trouble getting the graph templates to show the information that I'd like. Our interface configuration looks like this: interface GigabitEthernet3/6 description WalljackNumber # Server info no ip address no shutdown switchport switchport access vlan 116 switchport mode access ip dhcp snooping trust spanning-tree portfast The "Server Info" string is really just the machine name, and a short relevant description, such as "PolarSprings vmnic2". The important part appears to be that it follows the hashmark. When I run snmpwalk, I get the proper output: IF-MIB::ifAlias.230 = STRING: WalljackNumber # Server info But in Cacti, when I go into the graph templates and set the title to this: |host_description| - Traffic - |query_ifName| (|query_ifAlias|) All that shows up in the graph is: switchname - Traffic - Gi3/6 (WalljackNumber #) Which strikes me as a little weird. What I suppose MAY be happening is that somewhere in the cacti stream, it's interpreting # as being a comment and stripping everything after, but I'm not sure. I was hoping someone could tell me that this was a known documented behavior, or that I could change it in a setting that I wasn't aware of. The alternative answer is to change the delimiter from # to something else, but I've got over a thousand lit switchports on an old college infrastructure, and I'm not sure what else might be relying on them.

    Read the article

  • Simple options for port forwarding to a different port?

    - by Nick
    I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

    Read the article

  • Download JDK onto a remote server

    - by itsadok
    I want to get the latest JDK onto a server in a remote location. Downloading the JDK from Sun's website requires jumping through all kinds of hoops until you actually get the file. I'm not sure exactly if they use cookies or my IP address, but simply copying the file URL and trying wget on the server doesn't work. Googling for mirrors of the JDK, I could only find old versions. Right now I'm left with the option of downloading it into my computer, then uploading it to the server. This feels slow and stupid. Anyone got a better idea? EDIT: Thanks for all the replies. Just to clarify, as I'm writing this I'm rsyncing the 78MB file to my server. It should be done in about an hour, so it's not such a big deal. However, since this is not the first time I'm doing this, I was hoping for a better solution for next time. Solution: What I ended up doing was sudo aptitude install lynx-cur www-browser http://java.sun.com/javase/downloads/ From there it's mostly using the arrow and enter keys, and answering "Yes" to a lot of lynx security questions (about cookies and certificates). Thanks to resonator.

    Read the article

  • Merge changes in Microsoft Word documents

    - by Álvaro G. Vicario
    I'm using Microsoft Word 2002 to maintain some documentation. The documents are stored in a version control repository (Subversion) together with the source code it documents. My Subversion client (TortoiseSVN) comes with a little VBA script that allows to leverage the built-in revisions feature when merging different branches. In other words, when I want to copy changes from one document to another, Word compares both documents (source and target) and builds a third document that has the contents of the source doc tagged as revisions, so I can then review differences one by one and confirm or discard changes. While this is handy, it also means that making a single change to the source document forces me to review all the differences between both documents and discard all of them except the only actual change. My questions is... Do you know about an application or plug-in that's able to find the differences between two Word documents and apply those differences to a third document? (I know 2002 is very old but that's what my company gives me; I'm open to solutions that use newer versions though.)

    Read the article

  • Cannot install mercurial properly - PYTHONPATH error

    - by evident
    Hi, I have a server running on Ubuntu 10.04 on which I wanted to install Mercurial via % sudo apt-get install mercurial It seems to have installed successfully and doesn't show me any error messages. But when I try it I get: % hg abort: couldn't find mercurial libraries in [/usr/bin /usr/lib/python2.6 /usr/lib/python2.6/plat-linux2 /usr/lib/python2.6/lib-tk /usr/lib/python2.6/lib-old /usr/lib/python2.6/lib-dynload /usr/lib/python2.6/dist-packages /usr/lib/pymodules/python2.6 /usr/local/lib/python2.6/dist-packages] (check your install and PYTHONPATH) I've googled for a while now and found some sites with the same problem but I still have no idea on how to fix it since it nowhere really says what I need to look for or what I need to add to my PYTHONPATH... By the way, right now my PYTHONPATH seems to be empty: % echo $PYTHONPATH % This is what I get if I look into my /usr/lib/ directory for mercurial: % find /usr/lib/py* -name 'mercurial*' /usr/lib/pymodules/python2.6/mercurial /usr/lib/pymodules/python2.6/mercurial-1.4.3.egg-info /usr/lib/pyshared/python2.6/mercurial Can anybody please help me with that? What (and how) should I set my PYTHONPATH to? I already tried reinstalling, installing with "easy_install mercurial" or with "aptitude reinstall mercurial" but nothing helped. I always get this same error. Would be great if anyone could help... thanks! ADDITION: Building from scratch didn't work out well... when I am logged in as root I can use hg, but when I access with my normal user I get: % hg Traceback (most recent call last): File "/usr/local/bin/hg", line 4, in <module> import pkg_resources File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 2659, in <module> parse_requirements(__requires__), Environment() File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 546, in resolve raise DistributionNotFound(req) pkg_resources.DistributionNotFound: mercurial==1.7.2

    Read the article

  • Philips Monitor problems - vertical lines on screen

    - by asdasd
    I have an old CRT Philips Monitor 17'' and it was working well. There were problems with the electrical power and the monitor started to make some sound and a smoke was getting out of it. I quickly switched it off the power, and in the morning when the power was ok i started the monitor and it appeared to be working and it worked for a couple of minutes when i find out some smell was coming from it, and after 5 minutes the screen i was working shut down and on the monitor some vertical lines appeared - and nothing else. I thought it was the OS, so i rebooted the pc and while it was booting i realized the monitor didn't show the bios info etc, but the same vertical lines on the whole screen were on it, sometimes their color was changing and they were blinking, but no screen appeared - only those vertical lines. After a day, the monitor was ok again - i turned it on and no there were no lines, everything was working fine. The same for the next 2 days. My question is: If anyone had ever had the same problem, can you help me ? THe monitor may be ok now but i am afraid it can get back those lines again. I don't know what to do, if you know please tell me whether should i take it to the service or not. Thank you.

    Read the article

  • Macbook Battery Charging Troubles

    - by bobber205
    Problem: Occasionally, my macbook's battery will say it's charging and actually won't be. It stays at 0% for a long time. Other info: I thought it was my battery (laptop was 3 years old). Got a new battery. Issue did not go away. Got a new power supply. Did not go away. Ended up getting a unibody macbook pro. :) (We even ended up moving to a new house). Now still having the issue. The only thing I can think of is my power strip, which is the only thing that has stayed constant. Is it possible for the strip to be affecting the amount of watts my macbook(s) are getting and preventing it from properly charing the battery. I think it goes in and out, the battery picks up the slack and once it's empty the computer shuts down b/c there's no power at all for a second or two. Funny thing is I have a desktop PC on this same strip and it has never had issues with power. Thanks! :)

    Read the article

  • Xen PV packet loss

    - by Delphinator
    I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

    Read the article

  • How do I disable the firewall on blackberry?

    - by user15660
    I own a Blackberry 9630 tour.(Sprint). The firewall is enabled with a lock sign and grayed out. I'm not able to disable it. Because of this many of my blackberry apps don't work as it gives a message "The application has tried to open a connection that's not allowed by your IT policy". I tried all options and there's nothing to disable. This is a personal blackberry and I don't have an IT policy on it. I did all methods like wiping, formatting/resetting to factory settings acc. to blackberry site by running their reset app from PC etc etc. but nothing works I tried CrackUtil for blackberry and that worked and wiped the blackberry. I restored my bb and started using it just to notice that the firewall is enabled back after a desktop manager connection to PC. I even made sure the policy.bin file on PC is a regular one with no IT policy. How do I get this disabled? I had the same problem on my old blackberry 8330 and crackutil disabled the firewall. but after a few days after a desktop manager update of blackberry OS and other small stuff the firewall got enabled again. Please give me a solutions to disable the firewall on blackberry

    Read the article

  • Server nearly unusable when doing disk writes

    - by Wikser
    My question closely relates to my last question here on serverfault. I was copying about 5GB from a 10 year old desktop computer to the server. The copy was done in Windows Explorer. In this situation I would assume the server to be bored by the dataflow. But as usual with this server, it really slowed down. At least I could work with the remote session, even there was some serious latency. The copy took its time (20min?). In this time I went to a colleague and he tried to log in in the same server via remote desktop (for some other reason). It took about a minute to get to the login screen, a minute to open the control panel, a minute to open the performance monitor, ... Icons were loading maybe one per second. We saw the following (from memory): CPU: 2% Avg. Queue Length: 50 Pages/sec: 115 (?) There was no other considerable activity on the server. The server seldom serves some ASP.NET pages, which became also very slow in this time. The relevant configuration is as follows: Windows 2003 SEAGATE ST3500631NS (7200 rpm, 500 GB) LSI MegaRAID based RAID 5 4 disks, 1 hot spare Write Through No read-ahead Direct Cache Mode Harddisk-Cache-Mode: off Is this normal behaviour for such a configuration? What measurements could give further clues? Is it reasonable to reduce the priority of such copy I/O and favour other processes like the remote desktop? How would you do that? Many thanks!

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • Cable management techniques

    - by cornjuliox
    How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). How do large offices and data centers manage their masses of cable?

    Read the article

  • Cable management techniques

    - by cornjuliox
    How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

    Read the article

  • Mac Backup Plan

    - by Chuy77
    I'm reviewing my backup plan and would appreciate any thoughts about what more I should do (if anything) to make sure I'm properly covered in case of all hell breaking loose. :-) I have one machine. 1) I run a nightly clone with SuperDuper. I alternate the clone drive weekly so I have two clones, one never more than a week old. 2) I use BackBlaze as a sort of Time Machine in the cloud. It runs all the time and keeps everything on my machine backed up online. 3) I sync all my 1Password logins, etc. to my iPhone once a week. ...And that's it. I feel pretty covered. But I'm always reading stuff like this: http://www.43folders.com/2010/03/15/yes-another-backup-lecture And that doesn't even mention online backup, and seems like a huge pain in the behind. But maybe I'm being naive? Should I have more backups? Thanks for any feedback. I really appreciate it.

    Read the article

  • System freezes during boot process

    - by slugster
    Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

    Read the article

  • Bad font anti-aliasing in Ubuntu

    - by Juliano
    I'm switching from Fedora 8 to Ubuntu 9.04, and I can't seem to get it to get a good font anti-aliasing to work. It seems that Ubuntu's fontconfig tries to keep characters in integral pixel widths. This makes text more difficult to read, when 1 pixel is too thin and 2 pixels is too thick. Check the image below. In Fedora, when fontconfig anti-aliasing is enabled, fonts have their thickness proportional to the font size. Below, the thickness is different for 8, 9 and 10pt sizes. In Ubuntu, on the other hand, even when anti-aliasing is enabled, all 8, 9 and 10pt sizes have 1 pixel thickness. This makes reading larges amount of text difficult. I'm using the very same home directory, and I already checked that X resources are the same in both systems: ~% xrdb -query | grep Xft Xft.antialias: 1 Xft.dpi: 96 Xft.hinting: 1 Xft.hintstyle: hintfull Xft.rgba: none GNOME settings: ~% gconftool-2 -a /desktop/gnome/font_rendering antialiasing = grayscale hinting = full dpi = 96 rgba_order = rgb So, the question is: What should I change in the new box (Ubuntu) in order to get anti-aliasing like in the old box (Fedora)?

    Read the article

  • How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

    - by Todd V. Rovito
    I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

    Read the article

  • How to fix a bootable USB Kubuntu installation when the drive has maxed out?

    - by NoCatharsis
    I used Universal-USB-Installer-v1.5.1 from PenDriveLinux.com with Kubuntu 10.04 so I could set up my 4GB flash drive as a totally independent installation. Unfortunately, there was an OS upgrade available which Kubuntu downloaded and attempted to install. This, along with some other software, apparently maxed out my drive before I realized it. Now when I try to boot from the drive, everything boots as normal to the OS boot screen where I select "Boot from this Kubuntu USB Installation." The startup process initiates, then stalls about halfway through and hangs indefinitely. I'm guessing the drive is trying to use space it doesn't have and completely stops working. I realize that once the OS upgrade is in place, the old files could be deleted for a potential 700MB space gain. However, I just have no way to get into the OS and complete the upgrade. My main OS is Windows 7. Is there a way I can fix this issue from within Windows without formatting the entire drive and reinstalling Kubuntu from scratch?

    Read the article

  • Building a PC, advice on SSD/Hybrid Hard Drives

    - by Jamie Hartnoll
    I am looking at building a new PC, it's mainly for office (graphics heavy) use and programming. Looking for good performance with opening and closing programs and files as well as a fast boot. I plan to have 3 primary hard drives Windows 7 Programs (photoshop etc) Current Files (There'll also be a large storage capacity back up drive, but this will be the Seagate drive I already have.) So, my question is, looking at standard "old fashioned" hard drives and SSD drives, obviously there's a massive price difference. I have been looking at drives like this: http://www.ebuyer.com/268693-corsair-120gb-force-3-ssd-cssd-f120gb3-bk-cssd-f120gb3-bk and this: http://www.ebuyer.com/321969-momentus-xt-750gb-sata-2-5in-7200rpm-hybrid-8gb-ssd-in-st750lx003 Having no experience of using either I don't know what's the most efficient thing to go for. Clearly the SSD will have better performance, but: If, for example, I had an SSD for Windows (say about 100gB), that would clearly give me the boot speed I want, then I guess my real questions are: If I were to buy one more SSD, would it give the greatest improvement on standard performance if used to store programs, or currently used files? Given that the OS is on an SSD, should I not bother with the 3 drives and instead, partition that Hybrid drive to store programs and currently used files on it? Obviously, option two is cheaper and option one could cause me storage issues, but that's when I can dump files I am not currently using onto another drive. Any, I am open to suggestions... so what do you suggest?!

    Read the article

  • svn post-commit not performing

    - by davin
    ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

    Read the article

  • Single computer on network cannot connect to internet.

    - by user34630
    Hi All, I hope you can help me out! :) I have 3 computers and one device (Xbox) on my home network; 2 running XP and one on Vista. The computer that can't connect to the internet (XP) is old and failing, and shows no warning before it completely runs out of battery. Thus today, I started it up forgetting that I had unplugged it the night before, and it just ran out of battery entirely whilst I was using it and died. I think that before this I had been browsing the internet, but I can't remember for certain. (i.e. The problem I am having may or may not have been caused by this 'hard' power off). Anyway, now when I start the computer up it takes 5-10 minutes after logging on to display the start bar and icons. Also, I cannot browse the internet. The computer seems to connect to the network OK (I have tried both wired and wireless), but I can't visit sites and can't ping web addresses. Pinging the router fails, as does pinging another of my computers on the network. I have never encountered something like this before, and whilst I am no noob I am also not a sysadmin, haha. :( Any help is greatly appreciated, thank you for your time. P.S. I have tried a system restore (newbie move?).

    Read the article

  • certificate working on IP but not on URL

    - by Stephan
    I asked this question on stackoverflow, and I've been suggested to repost it here. I have a problem accessing my site (on https) with IEMobile 9 (WP 7.5). It says it's got problem with the certificate, as if it wasn't valid. Everything works on any other browser or platform I tested (android (several phones and a galaxy tab with stock browser, firefox, opera, dolphin), iOS (iphone and ipad with safari and chrome), an old nokia with symbian, windows 7, linux and mac). To try to solve this I saved the certificate (.cer) on the server and accessed it from the phone browser. It always complained except when I accessed it through the server IP (192.168.xx.xx). At that point it (said it) installed correctly the certificate. If then I try to access the index.html still using the IP all works fine and it doesn't complain about the certificate. If, though, I try to access the index using the actual URL (blah.myblah.com), it complains again about the certificate, as if it wasn't installed! It isn't a problem of DNS, cause that's up and serving the right ip, and the phone is correctly setup to use it. The certificate is signed by geotrust/rapidssl for *.myblah.com.

    Read the article

  • x86_64 and memory issues

    - by Valery
    Recently I've switched from ubuntu 32bit to 64bit version. And now I experiencing some problems. All application take twice more memory. And some application takes even more. For example sshd on new server: root 6608 0.0 0.0 67972 2912 ? Ss 14:43 0:00 sshd: deploy [priv] deploy 6616 0.0 0.0 67972 1724 ? S 14:43 0:00 sshd: deploy@pts/4 root 20892 0.0 0.0 50916 1160 ? Ss 15:53 0:00 /usr/sbin/sshd root 21170 0.0 0.0 67972 2912 ? Ss 15:56 0:00 sshd: deploy [priv] deploy 21173 0.0 0.0 67972 1728 ? S 15:56 0:00 sshd: deploy@pts/0 root 23802 0.0 0.0 67972 2912 ? Ss 16:08 0:00 sshd: deploy [priv] deploy 23804 0.0 0.0 67972 1724 ? S 16:08 0:00 sshd: deploy@pts/1 root 24570 0.0 0.0 67972 2908 ? Ss 12:45 0:00 sshd: deploy [priv] deploy 24573 0.0 0.0 68112 1804 ? S 12:45 0:00 sshd: deploy@pts/3 deploy 25014 0.0 0.0 5168 852 pts/0 S+ 16:13 0:00 grep ssh the same on the old server: root 4867 0.0 0.0 5312 1028 ? Ss Mar23 0:00 /usr/sbin/sshd root 23753 0.0 0.0 8052 2556 ? Ss 16:15 0:00 sshd: deploy [priv] deploy 23755 0.0 0.0 8052 1524 ? S 16:15 0:00 sshd: deploy@pts/0 deploy 23770 0.0 0.0 3004 748 pts/0 D+ 16:15 0:00 grep ssh The same problems with postfix, nginx and some other application.

    Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >