Search Results

Search found 17924 results on 717 pages for 'z order'.

Page 372/717 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• How to check if cell contains a value of another cell

  - by Antonio Oliveira

  Here is the scenario: On column A each cell has random text within it (names, address, account numbers, etc). Column A extends down to over 40 thousand rows. On column B I have a list of (account) numbers. Column B extends down to about 5 thousand rows. I need to filter column A to show only the rows that contain the account numbers that are part of column B. Neither column A nor B are in any specific order. I think he above scenario speaks for itself, but I can provide a quick example if needed (don't want to over complicate it).

  Read the article

• gevent with Django as daemon

  - by jonathonmorgan

  I've been developing an app using django_socketio (a python port of the Node equivalent), which relies on gevent. It ships with a Django management command that runs gevent's pywsgi server, but that of course stops when I close my terminal window, just like Django's dev server. This is a proof of concept, and there's no expectation that it would hold up in a production environment, but I'd like to have the server at least "permanently" process HTTP requests, so I don't need to manually start the dev server in order to demo. I'm assuming I need to run this as a daemon process, but prior to this I've only used apache and mod_wsgi, so unsure of where to begin, or even how I would go about starting a daemon. I found gevent-spawn, which looks promising, but it's unclear to me how that code is executed. Basically, how would I use gevent to serve a Django app in a setting without manually starting/stopping the server?

  Read the article

• How can I unify my email, calendar and tasks (2 exchange accounts + 1 gmail)

  - by Assaf Stone

  This is my situation: I work as a consultant, and thus work out of multiple computers: my work-laptop a desktop at my primary client my desktop at home an android smartphone an android tablet Likewise, I have multiple accounts: A Microsoft Exchange (2010 AFAIK) account A Microsoft Exchange (2007 AFAIK) account A gmail account The most important thing I need is the ability to have events in one calendar affect the free / busy status of all other accounts (so that if I am busy on Monday 9am with an event from my employer's account, it will show that time as busy in my client's account, and in the gmail account. Second thing I need is a unified view of all of my accounts' info: Appointments, email, tasks, and contacts (in that order of importance). I've already tried outlook synchronization tools such as gSyncit, to sync both exchange accounts with gmail, but this creates a mess when updating appointments (deleted appointments sometimes return, timestamps revert). Is there perhaps some way to at least synchronize the free/busy state in a way that all of my calendar apps / accounts will look there to see if I can be invited? Just solving that would be well worth my while. Thanks, Assaf

  Read the article

• Which version management design methodology to be used in a Dependent System nodes?

  - by actiononmail

  This is my first question so please indicate if my question is too vague and not understandable. My question is more related to High Level Design. We have a system (specifically an ATCA Chassis) configured in a Star Topology, having Master Node (MN) and other sub-ordinate nodes(SN). All nodes are connected via Ethernet and shall run on Linux OS with other proprietary applications. I have to build a recovery Framework Design so that any software entity, whether its Linux, Ramdisk or application can be rollback to previous good versions if something bad happens. Thus I think of maintaining a State Version Matrix over MN, where each State(1,2....n) represents Good Kernel, Ramdisk and application versions for each SN. It may happen that one SN version can dependent on other SN's version. Please see following diagram:- So I am in dilemma whether to use Package Management Methodology used by Debian Distributions (Like Ubuntu) or GIT repository methodology; in order to do a Rollback to previous good versions on either one SN or on all the dependent SNs. The method should also be easier for upgrading SNs along with MNs. Some of the features which I am trying to achieve:- 1) Upgrade of even single software entity is achievable without hindering others. 2) Dependency checks must be done before applying rollback or upgrade on each of the SN 3) User Prompt should be given in case dependency fails.If User still go for rollback, all the SNs should get notification to rollback there own releases (if required). 4) The binaries should be distributed on SNs accordingly so that recovery process is faster; rather fetching every time from MN. 5) Release Patches from developer for bug fixes, feature enhancement can be applied on running system. 6) Each version can be easily tracked and distinguishable. Thanks

  Read the article

• How dow I remove 1.000.000 directories?

  - by harper

  I found that in a directory more than 1.000.000 subdirectories has been created due to a bug. I want to remove all these directories, let's say in the directory WebsiteCache. My first approach was to use the command line tool: cd WebsiteCache rmdir /Q /S . This will remove all subdirectories except the directory WebsiteCache itself, since it is the current working directory. I noticed after two hours that the directoriws starting with A-H have been removed. Why does rmdir removes the directories in alphabetical order? It must take additional effort to do this ordered. What is the fastest way to delete such an amount of directories?

  Read the article

• Is Samba "remote browse sync" possible across OpenVPN tunnel?

  - by John Reynolds

  I'm connecting 2 TomatoUSB (Shibby build on WNR3500L v2) routers with an OpenVPN routed connection: ----------------------- ----------------------- | Router 1, subnet 20 | <--tunnel--> | Router 2, subnet 21 | ----------------------- ----------------------- Router 1 is the OpenVPN server and Router 2 is a client. Clients attached to the routers on both subnets can ping clients on the other subnet, so the tunnel and routing works. I've enabled file sharing on both, in order to get their Samba WINS servers running. Is it possible to get name resolution across the tunnel? I've tried remote browse sync = 192.168.21.1 in /etc/smb.conf on the server side, to no avail. Also tried using the IP adress that the client gets from the OpenVPN address pool (usually 10.8.0.something), but still no joy.

  Read the article

• Comparing two strings in excel, add value for common variables

  - by overtime

  I'm comparing two large datasets containing strings in excel. Column A contains the numbers 1-1,000,000. Column B contains 1,000,000 strings, neatly organized in the desired order. Column C contains 100,000 randomly organized strings, that have identical values somewhere in column B. Example: A B C D 1 String1 String642 2 String2 String11 3 String3 String8000 4 String4 String78 What I'd like to do is find duplicate values in columns B and C then output the Column A value that corresponds with the string in Column C into Column D. Desired Output: A B C D 1 String1 String642 642 2 String2 String11 11 3 String3 String8000 8000 4 String4 String78 78

  Read the article

• glTexImage2D not loading my data

  - by Clyde

  Can anyone suggest why this code doesn't work? When I draw using this texture all I get is black. If I use GLUtils.texImage2D() to load a png file, it works correctly. ByteBuffer bb = ByteBuffer.allocateDirect(128*128*4).order(ByteOrder.nativeOrder()); bb.position(0); for(int row = 0; row != 128; row++) { for(int i = 0 ; i != 128 ; i++) { bb.put((byte)0x80); bb.put((byte)0xFF); bb.put((byte)0xFF); bb.put((byte)i); } } int[] handle = new int[1]; GLES20.glEnable(GLES20.GL_TEXTURE_2D); GLES20.glGenTextures(1, handle, 0); DrawAdapter.checkGlError("Gen textures"); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, handle[0]); DrawAdapter.checkGlError("Bind textures"); bb.position(0); GLES20.glTexImage2D(GLES20.GL_TEXTURE_2D, 0, GLES20.GL_RGBA, 128, 128, 0, GLES20.GL_RGBA, GLES20.GL_UNSIGNED_BYTE, bb); DrawAdapter.checkGlError("glTexImage2D"); return handle[0];

  Read the article

• Windows 7 x64. Some 32 bit applications refuse to install.

  - by user250712

  I have been having problems lately when trying to install older games onto my PC. It is only with 32 bit applications. A few games that will not install are: Drakan: Order Of The Flame TA Kingdoms (Total Annihilation installed fine) Baldur's Gate. In Baldur's Gate, when I use autorun.exe and choose install, the autorun closes and the computer loads for a second (as it should) then nothing pops up. Ten minutes later still nothing, so I try again, still nothing. So next I use Setup.exe. Still nothing. I run it in every compatibility mode, and as Administrator in every mode, still nothing. Then I open Task Manager, and there are about 80 setup.exe processes running, all of them doing nothing and taking up next to no resources.

  Read the article

• How do I map some subdirectories to run alongside a Drupal site?

  - by paradroid

  I have a Drupal site running on Apache using the following vhosts file: <VirtualHost xx.xx.xx.xx:80> ServerName bananas.net ServerAlias www.bananas.net DocumentRoot /var/www/drupal/ RewriteEngine On RewriteCond %{HTTP_HOST} !=bananas.net [NC] RewriteRule ^(.*)$ http://bananas.net$1 [L,R=301] <Directory /var/www/bananas.net/> Options -Indexes FollowSymlinks AllowOverride All Order allow,deny Allow from all </Directory> CustomLog ${APACHE_LOG_DIR}/access.log combined ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost> I set it up some time ago, so I am not sure what the <Directory /var/www/bananas.net/> directive was meant for. That directory is currently empty. With the vhosts file the way it is, does the Directory directive have any effect at all? I want to add some content which is separate from the Drupal site. How do I add sub-directories within /var/www/bananas.net/ which can be accessed alongside the Drupal site running at the root? As they have nothing to do with the Drupal site, I want to keep the files separate, but still using the same domain.

  Read the article

• Question about modeling with MVC (the pattern, not the MS stuff / non web)

  - by paul

  I'm working on an application in which I'm looking to employ the MVC pattern, but I've come up against a design decision point I could use some help with. My application is going to deal with the design of state-machines. Currently the MVC model holds information about the machine's states, inputs, outputs, etc. The view is going to show a diagram for the machine, graphically allowing the user to add new states, establish transitions, and put the states in a pleasing arrangement, among other things. I would like to store part of the diagram's state (e.g. the x and y state positions) when the machine information is stored for later retrieval, and am wondering how best to go about structuring the model(s?) for this. It seems like this UI information is more closely related to the view than to the state-machine model, so I was thinking that a secondary model might be in order, but I am reluctant to pursue this route because of the added complexity. Adding this information to the current model doesn't seem the right way to go about it either. This is the my first time using the MVC pattern so I'm still figuring things out. Any input would be appreciated.

  Read the article

• rsnapshot stats

  - by Obscur Moirage

  I'd like to retrieve the following stats from rsnapshot files synced added files modded files deleted files Is there a feature to retrieve these in rsnapshot, or is there another product that's able to do it? EDIT: As requested, I'll try to show that I'm not just asking what I want to do without any research. I wasn't able to locate any rsnapshot feature doing this. Maybe I'm searching in a wrong direction. So, I've built a not very pretty script, called each time before rsnapshot is ran. This Perl script stores each file MD5, in order to compare backup files structures between rsnapshot updates. I'm pretty sure it's worthless to show this code here. I think that keeping an eye on what change on a server, for example, is a useful feature. So, I'm asking. @pauska Most of the time, I'm trying to search for an answer myself, which is not the case here. Thanks

  Read the article

• Can I upgrade my ubuntu version and change to be primary OS after originally installing with Wibu?

  - by Garrick Wann

  I have recently installed Ubuntu 12.04 using Wubi 12.04 and I now wish to upgrade to a full installation of Ubuntu 14.04, Before attempting to upgrade through the update center I did some research on upgrading from a Wubi installation (alongside windows) to a full installation making Ubuntu primary and only OS and found that it is in fact doable through the update center however it is just highly recommended to perform a full backup before doing so. I have now finished backing up all the data I need to worry about and began the upgrade process through the update center and received the following error: Your graphics hardware may not be fully supported in Ubuntu 14.04. Running the 'unity' desktop environment is not fully supported by your graphics hardware. You will maybe end up in a very slow environment after the upgrade. Our advice is to keep the LTS version for now. For more information see https://wiki.ubuntu.com/X/Bugs/UpdateManagerWarningForUnity3D Do you still want to continue with the upgrade? My questions are as follows: A. Isnt 14.04 a LTS version??? B, What are your recomendations in order to ensure my graphics driver is installed correctly and im not stuck with bad configs/install?

  Read the article

• xm console command is not working in XEN

  - by stillStudent

  I have XEN 4.0.x.x rpm with CENT OS. I have set it up and have many VMs on it. But problem is when I execute 'xm console ' command from dom0, command just hangs dom0 and some 'y' comes up in next line but nothing really happens. Is it a bug in xen 4.0 and I need to upgrade it or I can tweak some configuration file in /etc/xen/ to make it work. I found following at some site but its not working: In order to be able to login to your domU from the console using: xm create {your hostname}.cfg -c (to the set root password for ssh, for instance, or to see more output than just kernel output when debugging) it may be necessary to add the following line to your /etc/xen/{your hostname}.cfg extra='xencons=tty' Is there any other way to solve it?

  Read the article

• How to download big file with chrome on Mac OSX?

  - by Eye of Hell

  If I try to download a big file on unstable connection/server (XCode 4) Google chrome simply "stops" downloading on first network error so I have a first 1-2-3 gigabytes of file and chrome thinks that download is finished. Unfortunately, I need to download an entire file, so I need a more advanced download tool like a wget. But there comes a problem: most URL's currently on the web is not a direct URL but multiple "redicrect" pages that utilize complex javascript in order to generate next url and redirect browser to it. Chrome handles such things ok, but if I try to supply such URL to wget it will download some "intermediate" page as a file - not a file itself but an HTML page with complex redirect javascript. is it any way to get a direct URL from chrome or to somehow discover it so I can use it with wget? Maybe it's some avanced download manager integrated in chrome that I just need to install? I use MacOS X 10.6.6 and latest Google chrome.

  Read the article

• Unique string values in range

  - by Dean Smith

  I have some spreadsheets where there are large number of cells that have essentially been used for free text. There is a finite set of values for this free text and most, if not all repeat. eg. A B C D 1 Monkey Gorilla Cat Dog 2 Dog Cat Gorilla Gorilla 3 Dog Dog Dog Cat There are probably 50 or so different cell values spread over multiple sheets and hundreds of rows and columns. I need to analyse this data and count occurancies, which is not a problem other than getting a list of unique values to start with and this has been driving me up the wall. What is the best way to produce this list. So from the above we would have Monkey Dog Cat Gorilla In order of preferred solutions, as this will need to be done monthly. Dynamic formula based VB Script Other ( Advanced filtering or other manual steps )

  Read the article

• Error connecting ESX 5.0.0 to domain

  - by Saariko

  I am trying to connect an ESX 5.0.0 to our Domain Controler, in order to give a Domain group specific roles security. But I do not see any groups after the host connects to the domain. Under Configuration - Authentication Services - I connected the host to the domain: I created the role I wanted, with the selected approved features But when I want to add a permission to a set of VM's, I can not see "my domain" on the drop down, only the: "localhost" How do I see "my domain" on the Domain drop down - so I can select the domain group to give the role to? To note: I followed the instructions to connect to the domain form VMware site.

  Read the article

• Conflicts between 2 NICs

  - by funbi_grace

  Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• Some $_SERVER parameters missing when accessing PHP script via Cron

  - by Jakobud

  I have a script that I need to run with PHP via cron. The original author of the script made a lot of user of certain $_SERVER parameters (like REQUEST_URI). But it appears that certain variables don't exist when running PHP via command line or via CRON. For example, there is no request uri, so it makes sense that the REQUEST_URI parameter wouldn't be available. Is there any way around this other than to completely rewrite the script in order to avoid using special $_SERVER parameters that aren't universally available?

  Read the article

• rsync --link-dest behaviour when run as sudo

  - by fotNelton

  In order to create regular backups, I'm using rsync together with --link-dest so as to create hard-links for unchanged files. For example: rsync -ax \ --partial --delete --delete-excluded --inplace \ --exclude-from=/tmp/temp_excludes \ --link-dest=/Volumes/Backup/current \ /Users /Volumes/Backup/2012-06-25 This works very well as long as I start the process from my normal user account. Though as soon as I start the process using sudo it behaves erradically, meaning that rsync copies all the unchanged files instead of hard-linking them. Since sudo modifies the environment, I've already also tried sudo -E in conjunction with making sure that my sudoers file has the corresponding option set. Well, that didn't work either. So, the question is, how can I run rsync using sudo? Whereas the above example only shows a backup of the Users directory, I also need to backup some system files that I can only access as root.

  Read the article

• Most efficient Implementation a Tree in C++

  - by Topo

  I need to write a tree where each element may have any number of child elements, and because of this each branch of the tree may have any length. The tree is only going to receive elements at first and then it is going to use exclusively for iterating though it's branches in no specific order. The tree will have several million elements and must be fast but also memory efficient. My plan makes a node class to store the elements and the pointers to its children. When the tree is fully constructed, it would be transformed it to an array or something faster and if possible, loaded to the processor's cache. Construction and the search on the tree are two different problems. Can I focus on how to solve each problem on the best way individually? The construction of has to be as fast as possible but it can use memory as it pleases. Then the transformation into a format that give us speed when iterating the tree's branches. This should preferably be an array to avoid going back and forth from RAM to cache in each element of the tree. So the real question is which is the structure to implement a tree to maximize insert speed, how can I transform it to a structure that gives me the best speed and memory?

  Read the article

• Choosing a JavaScript Asynch-Loader

  - by Prisoner ZERO

  I’ve been looking at various asynchronous resource-loaders and I’m not sure which one to use yet. Where I work we have disparate group-efforts whose class-modules may use different versions of jQuery (etc). As such, nested dependencies may differ, as well. I have no control over this, so this means I need to dynamically load resources which may use alternate versions of the same library. As such, here are my requirements: Load JavaScript and CSS resource files asynchronously. Manage dependency-order and nested-dependencies across versions. Detect if a resource is already loaded. Must allow for cross-domain loading (CDN's) (optional) Allow us to unload a resource. I’ve been looking at: Curl RequireJS JavaScriptMVC LABjs I might be able to fake these requirements myself by loading versions into properly-namespaced variables & using an array to track what is already loaded...but (hopefully) someone has already invented this. So my questions are: Which ones do you use? And why? Are there others that my satisfy my requirements fully? Which do you find most eloquent and easiest to work with? And why?

  Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >