Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 375/539 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• I have a wireless Canon P560 and my computer can't find it

  - by ed

  The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• OpenVPN IPv6 over IPv4 tunnel

  - by user66779

  Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• Tracing what program is making a network connnection? (CentOS)

  - by Airjoe

  I was wondering if it is possible to find out which process is trying to make a specific network connection. On a server I support which hosts websites for about 200 users, the iptables firewall keeps blocking, as it should, a connection to 212.117.169.139 on port 80. Firefox reports this as an attack page (and at the least is obvious spam, if not malicious). It seems something on this server is trying to access this site for some reason, and although it's being blocked successfully, the requests seem to be going through every two to sixty seconds and I'd like to be able to find what process or script is doing this so I can handle it appropriately. Besides doing a grep to try and find if this IP is in some file (which probably won't even work because it may be working by hostname or it may be encoded), is there any way to find out some more information? Thanks!

  Read the article

• Linking two networks that have a common device

  - by Serban Razvan

  I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

  Read the article

• Can't pipe echo to netcat?

  - by user1641300

  I have the following command: echo 'HTTP/1.1 200 OK\r\n' | nc -l -p 8000 -c and when I curl localhost:8000 I am not seeing HTTP/1.1 200 .. being printed. I am on mac os x with netcat 0.7.1 Any ideas? #!/bin/bash trap 'my_exit; exit' SIGINT SIGQUIT my_exit() { echo "you hit Ctrl-C/Ctrl-\, now exiting.." # cleanup commands here if any } if test $# -eq 0 ; then echo "Usage: $0 PORT" echo "" exit 1 fi while true do echo "HTTP/1.1 200 OK\r\n" | nc -l -p ${1} -c done and testing with: curl localhost:8000

  Read the article

• Connecting to my SMTP server

  - by Joseph Silvashy

  I have a few questions, I just installed SMTP on my Ubuntu server, and I want to know how to connect to it from a different machine... I'm not really clear. I tried: telnet my.servers.ip.address 25 I think it's running on port 25, but I don't know where to find out, its not in the conf file anywhere. Additionally do I need it to be a FDQN? or can I just access my mail server via it's IP address? I know that the service works on the machine because I'm able to echo test | mail -s "test" [email protected] Any help debugging or understanding this would be helpful, thanks guys!

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• Why is the pavucontrol level indicator jumping while nothing plays?

  - by EnterTheLiquidToasterFamily

  The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

  Read the article

• sql user not associated with a trusted connection

  - by homestead

  just setup a new server with sql server express 2005. (want to connect remotely) I set logins both windows and sql I modified so both local and remote connections are allowed I restarted the server windows firewall is not connected. (have an external firewall with a hole at port 1443) user account is active, no password policy or forcing to change on next login etc. If I even try to connect using this username locally on the server using 'file | connect to object explorer' I get the same message that the user is not associated to a trusted connection.

  Read the article

• Lots of artifacts while streaming HD content with VLC 0.9.9 on CentOS

  - by Zsub

  I'm trying to stream (multicast) a x264 encoded file using VLC. This in itself succeeds, but the stream has a huge lot of artifacts. This seems to suggest that the data cannot be transported fast enough. If I check network usage, though, it's only using about 15 mbit. I have a similar SD stream which functions perfectly. I think I could improve stream performance by not streaming the raw data, but I cannot seem to get this working. It seems that on keyframes all artifacts are removed for a short while (less than a second). This is the command I use: vlc -vv hdtest.mkv --sout '#duplicate{dst=rtp{dst=ff02::1%eth1,mux=ts,port=5678,sap,group="Testgroup",name="TeststreamHD"}}' --loop Which is all one long line.

  Read the article

• Configuring IIS site to use HTTPS

  - by James

  I am working on a REST API which I have currently deployed on a Win XP Professional SP2 development machine running IIS 5.1. The site is currently being hosted on port 81 and being accessed via HTTP. I would now like to configure the site to stop using HTTP and use HTTPS only. I have developed a self-signed certificate using the SelfSSL.exe tool from the 6.0 Resource Kit Tools and set the Common Name to be the IP of my server (as it's a local development machine it has no domain name). I have also already configured the site to use SSL using the How To Set Up an HTTPS Service in IIS tutorial as my guide. However, whenever I try to access a resource in the API via HTTPS I get a 404. Any ideas?

  Read the article

• No input file specified with nginx

  - by user66700

  I'm getting "No input file specified." when I attempt to browse to the phpmyadmin domain, not sure what I'm doing wrong.. using both php-fpm and php-cgi, php-fpm is currently working another directory fine..Had to change the port number to 8888 since -fpm was already using 9000 http://pastebin.com/kdEckiL3 from nginx.conf: server { listen 80; server_name phpmyadmin.domain.com; access_log /home/fanboy/logs/phpmyadmin.access_log; error_log /home/fanboy/logs/phpmyadmin.error_log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include /usr/local/nginx/conf/fastcgi.conf; } }

  Read the article

• Map folder as drive permanently in Windows

  - by MajesticRa

  Lets say I need to map folder C:/D as drive D: One can use SUBST command to map folder as drive in Windows. SUBST d: C:/D I am absolutely happy how SUBST does the work. So I set this command as a startup task using the task manager. A problem here is that if I have a flash in a USB port while booting Windows, the flash is got mapped as D: and SUBST fails. The question is how to make C:/D to be D: permanently. So other drives (especially flash drives) don't break this during startup. P.S. I know I could set D: to be R: which is unlikely to conflict with other drives. But I would greatly appreciate another answer.

  Read the article

• How to use mod_proxy to let my index of Apache go to Tomcat ROOT and be able to browse my other Apache sites

  - by Dagvadorj

  I am trying to use my Tomcat application (deployed at ROOT) to be viewed from Apache port 80. To do this, I used mod_proxy, since mod_jk made me try harder. I used sth like this in httpd.conf: <location http://www.example.com> Order deny,allow Allow from all PassProxy http://localhost:8080/ PassProxyReverse http://localhost:8080/ </location> <Proxy *> Order deny,allow Allow from all </Proxy> And now I can not retrieve my previous sites on Apache, which was running prior to my configuration. How can I have both running?

  Read the article

• How do I fix Nginx config to work with multiple hosts of Unicorn?

  - by fred deAlmeida

  I have no problem instantiating multiple instances of unicorn on different unix sockets and ports. Works fine if I do url:port. My problem comes in correctly formatting nginx.conf to allow multipe upstream conditions. Whatever i do does not seem to work. One instance is fine works fine. Multiple gives me a ""upstream" directive is not allowed here error I am using the base nginx sample from the unicorn site. and doubling up the upstream area with differing terms. each is part of the http set. Any help would be amazing!

  Read the article

• Are these symptoms of a video card is dying?

  - by K Cloud

  What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

  Read the article

• java for freebsd

  - by rawman

  I am trying to install java on freebsd 7.X and i have done following thing so far download the tar file from this link and store the file in cd /usr/ports/distfiles/ after that i run cd /usr/ports/java/diablo-jre16 or cd /usr/ports/java/diablo-jdk16 make config install clean and uncheck all the options in config screen now after doing all this now i am getting following message to indicate for amd version even if my server is using intel Core2Quad Q9550 2.83 GHz mail# make install === Vulnerability check disabled, database not found === License check disabled, port has not defined LICENSE === Found saved configuration for diablo-jdk-1.6.0.07.02_12 Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download?download=diablo-caffe-freebsd7-amd64-1.6.0_07-b02.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo 1.6.0". Please place the downloaded file(s) in /usr/ports/distfiles. * Error code 1 Stop in /usr/ports/java/diablo-jdk16. mail# (as before i was getting error for tzupdater so i downloaded tzupdater-1_3_29-2010f.zip and put it in a cd /usr/ports/distfiles/ folder)

  Read the article

• connection with the application object server could not be established

  - by user44048

  Hello All, I have installed Axapta server on my Axapta(Machine name) machine. When i am going to start the axapta at that time it give error like " connection with the application object server could not be established ". Basic all the steps that i have tested like Service start restart and connection configuration. port number problem. Still i am not able to resolve a problem. please can any one tell me the solution. It's urgent please help as soon as possible. Thank you.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• mod_rewrite ssl redirect

  - by Thomas

  Hi all, I want to use mod_rewrite to ensure that certain pages are served with SSL and all others normally, but I am having trouble getting it to work This works (redirect to SSL when request uri is for users or cart) RewriteCond %{SERVER_PORT} 80 RewriteCond %{REQUEST_URI} users [OR] RewriteCond %{REQUEST_URI} cart RewriteRule ^(.*)$ https://secure.host.tld/$1 [R,L] So, to accomodate for a user not to keep browsing the site with ssl, when requesting other uris, I thought the below, but doesn't work: (when port is 443 and request uri is not one of uris that need to be served by ssl, redirect back to normal host) RewriteCond %{SERVER_PORT} 443 RewriteCond %{REQUEST_URI} !^/users [OR] RewriteCond %{REQUEST_URI} !group RewriteRule ^/?(users|groups)(.*)$ http://host.tld/$1 [R,L] Any help? Thanks

  Read the article

• Is there a convenient method to pull files from a server in an SSH session?

  - by tel

  I often SSH into a cluster node for work and after processing want to pull several results back to my local machine for analysis. Typically, to do this I use a local shell to scp from the server, but this requires a lot of path manipulation. I'd prefer to use a syntax like interactive FTP and just 'pull' files from the server to my local pwd. Another possible solution might be to have some way to automatically set up my client computer as an ssh alias so that something like scp results home:~/results would work as expected. Is there any obscure SSH trick that'll do this for me? Working from grawity's answer, a complete solution in config files is something like local .ssh/config: Host ex HostName ssh.example.com RemoteForward 10101 localhost:22 ssh.example.com .ssh/config: Host home HostName localhost Port 10101 which lets me do commands exactly like scp results home: transferring the file results to my home machine.

  Read the article

• Need advise on linking apache and tomcat

  - by hsnm

  I have been searching this for hours with no luck. I have a web server that uses https on Apache2. I also have installed tomcat7 on the same server to run some Java webapp on it. I need to keep my https port 443 on Apache but forward the requests to the Java webapp to tomcat. I tried to use mod_jk to redirect the requests to tomcat but I failed. Most tutorials talk about redirecting plain http requests not https. I also could not let tomcat use https on 8443. I'm following the steps here but facing errors. The question: Can I redirect https traffic to tomcat without installing https on tomcat? Is there a good tutorial you can recommend to me?

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >