Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 373/539 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Using PVLANs with normal VLANs in a trunked environment

  - by user974896

  Assume a trunked environment with two switches, S1 and S2. The swtiches are connected with a trunk port designed to pass VLAN 26. What would happen if VLAN 26 on S2 is configured as a private-vlan with the default gateway and DHCP server and default gateway as promisc ports. What if S1's VLAN 26 is configured as a standard VLAN. Would the hosts on S1 be able to communicate with the promisc ports on S2? Would they be able to communicate with the hosts on S2? To further complicate things what if the DHCP server were to reside on S1 and I wanted S2 to have private VLANS with promisc ports as the gateway and DHCP server while still leaving S1 in a standard vlan configuration.

  Read the article

• I can't get my Macbook Pro to print to an IP addressable printer

  - by Pieter

  Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

  Read the article

• Azure VM : Connection refused by host

  - by Simon Kérouack

  I recently stopped a subscription with 14 VMs in it and restarted it a few days later. Now all my VMs are working just fine at the exception of 6 used for MongoDB. They respond to ping and so they show as online in the azure dashboard but they do not answer to anything else. I tried (from different locations, in and out of the azure cloud) ssh : connect to host * port *: Connection refused telnet : Unable to connect to remote host: Connection refused mongo : exception: connect failed The ports for ssh and mongo are opened in azure. I tried restarting the VMs a few times trough the azure dashboard, they seem to restart successfully but still refuse all connections. I already looked for similar issues and the best solutions I found was to wait... the issue has been happening for 7 days and waiting is no more an option.

  Read the article

• how to change the default open-with program to a program on the second disk

  - by Scott????

  I have a 250GB HDD for my system and a 60GB SSD using a SATA port. I installed most of my applications on the SSD. There's a strange thing though. I can not change the default open-with program to a program which is on the SSD. I think it may be caused by permission so I gave my user a 'full control' permission on the security tab in disk properties. But changing permissions is not work. After I choose an application (I've tried Notepad++, Sublime, 7Zip, etc.), nothing is added in the below window: Also, if I install 7Zip on my machine, the right click menu items can not be added.

  Read the article

• how install minimum domain email piping to script in centos?

  - by Adam Ramadhan

  hello i have search google on a simple tutorial on how to make a piping email. first how does really email technically work? "stmp is a process that binds to 25, waiting for email request that goes in from another stmp process(in another server) determined by the domain MX route that will send the message to port 25 if any email goes though the MX.domain.tld" that is in a nutshell how emailing work, am i right? or there is something wrong here? second, so if im right, we need to set a SMTP server so we can receive incoming emails from MX SMTP route right? ive googled though google and found two best STMP servers from my opinion, they are EXIM and POSTFIX, can anybody give us a simple tutorial installing and setting up an email piping for a fresh installed linux/centos? example *.domain.tld -> allinonepipe.php thanks.

  Read the article

• Has ec2 made self-hosting possible for 'amateur' sysadmins possible?

  - by Blankman

  I'm a developer, and it seems ec2 has made it possible for a amateur sysadmin like me to setup and maintain a fairly large set of servers. Now I don't mean to undermine real sys admins, as I know the value of them but what I am trying to get at is that someone like me can setup and maintain a cluster of servers (front end web servers, with some db servers) using tools like ec2 and capistrano with the help of google. Now this isn't something I would do as a long term thing, but as a startup, one-man operation, I think I can pull this off until business takes off and I can hire this important role out. With ec2, I get my firewall, so I basically open up port 80 on my public facing server, which will run haproxy and route requests to my cluster of servers. Ofcourse I am simplifying the setup, but just want a feel for what you guys think about my perception. My application is a web application, that will be runing Ruby on rails (passenger) and talking to mysql or postgresql.

  Read the article

• Setting up Mac VPN on simple network with separate IPs

  - by Dave

  Hi there, We have a pretty simple network configuration. A typical ASDL line with two extra IP addresses. We have a basic home network router Dlink DIR-655. We have two Mac OS X Snow Leopard Servers that we want to setup VPN on. The problem is that we can't change the ports which VPN works under ie. we can only setup port forwarding for UDP 500,1701,4500 to a single server. I'm wondering how we can cost effectively re-work our network so that we can take advantage of the separate IP addresses and have both VPNs working with the same router. Is that possible with our current hardware setup or do we need something more powerful? We're also toying with Mobile Access and wondering if that might be easier to setup. Expert help is greatly appreciated.

  Read the article

• What constitutes valid justification for more IP addresses?

  - by David

  I host a small website with a well known VPS service. They provided me with one IPv4 address upon registering and said additional addresses would require justification. I requested one additional IPv4 address so as to have one for a production environment and one for a testing/QA environment. They said this was unnecessary as I could just use alternative TCP ports for the test environment. I can live with using a non-standard port for non-production hosting, but it got me thinking, what would be valid justification? (I asked them and they didn't want to answer). Is there an industry standard for what counts as "valid" justification for additional IPv4 addresses?

  Read the article

• Nginx (for static files) and Apache (for dynamic content)?

  - by matthewsteiner

  So, my entire application runs on apache just fine. However, I want to test how much the requests per second increases if I put all static files through nginx instead. I found this thread: http://stackoverflow.com/questions/869001/how-to-serve-all-existing-static-files-directly-with-nginx-but-proxy-to-apache-t But I have a couple problems. I'm completely new to nginx, so I'm not sure where to put the configuration. (The file is at /etc/nginx/nginx.conf, but I don't know if I just add the code to the bottom or what?) Also, how can I have both servers running at the same time? Is it because they both listen on port 80? Right now I have to stop one to start the other, and that's as far as I've gotten. Thanks for any help.

  Read the article

• Using Arch Linux computer as a server for Rack Apps

  - by wxl

  What would be the best way to go about using an Arch Linux computer as a Rack (as in Ruby Rack, not an actual rack server) server? Here's what I want to be able to do: Automatically deploy on a git push to the server. (I already have this worked out, on post-receive the server checks out the app to /home/git/app from /home/git/app.git.) Run a Rack server application to serve up this app, one that can be restarted on demand. Run a MongoDB server Be able to access the app by going to my-server.local/app or something similar. (It's really only going to be used on the local network, no port forwarding or outside use) Any ideas would be greatly appreciated. I apologize if this seems too "do it for me".

  Read the article

• DVI-D Splitter Not Working with GeForce 8400gs

  - by jimdrang

  I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

  Read the article

• How to calculate required switch speed based on network usage?

  - by tobefound

  I have a 48 port HP Procurve Switch 2610 (J9088A) that can handle 13.0 million PPS (packets per second) and features wire speed switching capacity at 17.6Gbps. First off, what does that REALLY mean? Where do I start when trying to figure out if my office (with 70 employees) will be well setup with this switch? How to calculate through-put based on a user average load of X MB per day? 90% of the folks will only be sending email, access random websites, etc... the other 10% will be conducting heavier tasks like moving image files (10 MB) across network shares, constant external FTP streams through the switch to a server etc... Is this switch good enough?

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• Connecting to Windows 7 from fedora is slow

  - by user44212

  I use rdesktop command to connect to windows 7 machine remotely but I get a very slow reponse when I try and connent to it. The command that I used to connect to it is rdesktop -4 -C -x -b : -g 100% 192.168.1.100. I have tried using the rdesktop command to connect to the console port as well but the result is the same. I have even tried using the Terminal server client application the result is the same. I am trying to connect from fedora 14 machine to windows 7 professional is there any tweaking that needs to be done to overcome this issue either on fedora or Windows 7.

  Read the article

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• vps running out of memory, 200MB free

  - by demon

  At the beginning of this year I took a VPS for my website because I was running against the resource limits from a shared hosting. Here are the things I know: 2GB memory, with 1GB swap Debian X64 server ED installed Software running on the webserver: mysql apache postfix pop3 imap amavisd clamd cron fail2ban munin-node pure-ftpd spamd nginx Now for the setup: Nginx listens on port 80 and handles the static files, the php side is done by apache2 running mod_php in combi with apc(no var caching!). Iam using a pretty 'busy' drupal and phpbb stack on the server, for drupal iam using boost and authcache to handle of the server load with a pressflow stack. phpbb is just phpbb3 with some mods installed, but has at max 30 users online at a time.. The problem is that its staring to use the swap after a few days after a reboot and thus the site becomes slower. I'v added pictures of monit and munin, so maybe somebody can help me out... Monit: Munin:

  Read the article

• USB keyboard not recognized by motherboard with only a legacy PS/2 header

  - by Luis

  I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

  Read the article

• Data transfer speed to USB storage connected to wifi router very slow

  - by RonakG

  Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

  Read the article

• Recommendations: Good Network MFP Printer/Scanner

  - by Joeme

  Hi, We have a small office that is expanding. At the moment we have 1x HP J6424 MFP, shared using it's built in network port. It is now becoming a headache, we have daily problems with people not being able to print or scan, and jobs just sitting in the queue. Or the scanner not being detected. Sometimes people can print but not scan, sometimes scan but not print, sometimes a bit of both. We are also pretty much constantly printing or scanning, or trying to! I would like to get a laser MFP (mono is fine) which works well for scanning a printing over the network with multiple users. Althernativly any recommendations for network scanners (sheet feed and or duplex a bonus). Clients are Windows 7 and Mac. Thanks very much!

  Read the article

• duplicate video stream using a router (?)

  - by Dani

  I have a viedo stream coming from one site, I want to do the following with the minimum delay possible: I want to duplicate the stream (inside the router - preferred) and send it to a few more locations one of them is local network and the rest - on other networks. I want to be able to do it to several streams simultaneously. Is it possible to do this - using network devices only ? What device is capable to do this ? (I can always record the stream and rebroadcast it - but that's a lot of delay, I'm looking for functionality that similar to port duplicating, but on higher layers). Thanks.

  Read the article

• Is there a way to control two instantiated systemd services as a single unit?

  - by rascalking

  I've got a couple python web services I'm trying to run on a Fedora 15 box. They're being run by paster, and the only difference in starting them is the config file they read. This seems like a good fit for systemd's instantiated services, but I'd like to be able to control them as a single unit. A systemd target that requires both services seems like the way to approach that. Starting the target does start both services, but stopping the target leaves them running. Here's the service file: [Unit] Description=AUI Instance on Port %i After=syslog.target [Service] WorkingDirectory=/usr/local/share/aui ExecStart=/opt/cogo/bin/paster serve --log-file=/var/log/aui/%i deploy-%i.ini Restart=always RestartSec=2 User=aui Group=aui [Install] WantedBy=multi-user.target And here's the target file: [Unit] Description=AUI [email protected] [email protected] After=syslog.target [Install] WantedBy=multi-user.target Is this kind of grouping even possible with systemd?

  Read the article

• ESXi with non-headless VM

  - by Mike

  I'm going to receive a Xeon Server/Workstation soon and I was thinking about installing ESXi to host some server applications that I want (ex: SVN server, Web server, media server, etc). Most of these will be headless VM's. My question is: on top of all these headless VM's, is it possible for ESXi to have another VM that would be non-headless (so that it will output video through the VGA/DVI port)? Or are all VM's within ESXi only accessible through remote connections? I'll be using this non-headless VM like a regular workstation: browsing, development, media, gaming maybe. The other alternative I was thinking about is to install a very lightweight operating system and have the headless VM's running in Virtualbox. If it is possible to have have a non-headless VM, what would be the performance compared to a regular workstation? Noticeable or not when gaming?

  Read the article

• Access my local server by hostname or servername

  - by S.M.09

  I have a local host server hosting a few applications in tomcat which comes through a apache proxy The client or User trying to access these application has to access them like 10.XXX.XXX.XX:8080/appName OR 10.XXX.XXX.XX/appName But I want to replace the ip address with soem other name related to my applications. But I cannot go and enter the host name of the server in each users /etc/host Nor do I want to be setting up DNS. Is there another way to do this. I am using ProxyPass XXX YYY to redirect all applications of tomcat to port 80

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >