Search Results

Search found 48844 results on 1954 pages for 'first steps'.

Page 376/1954 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

• python len calculation

  - by n00bz0r

  I'm currently trying to build a RDP client in python and I came across the following issue with a len check; From: http://msdn.microsoft.com/en-us/library/cc240836%28v=prot.10%29.aspx "81 2a - ConnectData::connectPDU length = 298 bytes Since the most significant bit of the first byte (0x81) is set to 1 and the following bit is set to 0, the length is given by the low six bits of the first byte and the second byte. Hence, the value is 0x12a, which is 298 bytes." This sounds weird. For normal len checks, I'm simply using : struct.pack("h",len(str(PacketLen))) but in this case, I really don't see how I can calculate the len as described above. Any help on this would be greatly appreciated !

  Read the article

• Adding nodes to a global linked-list

  - by Zack

  I am attempting to construct my first linked list, and having read a basic introduction, have done the following. Firstly, declare a linked list node as: struct errorNode { uint8 error; struct errorNode* next; }; Secondly, define the first node globally as: struct errorNode errorList = {0, NULL}; This has been done to allow each of the libraries that make up my current project to insert errors into a common list. The function to do this is: void errorListWrite(uint8 error) { struct errorNode* newNode = malloc(sizeof(struct errorNode)); newNode->error = error; newNode->next = &errorList; errorList = *newNode; } Whilst this compiles without error, it does not function as expected. I thnk the problem is with the last two statements of the list write function, but I am unsure. A hint as to what I am doing wrong would be most appreciated.

  Read the article

• Assign the results of a stored procedure into a variable in another stored procedure

  - by RHPT

  The title of this question is a bit misleading, but I couldn't summarize this very well. I have two stored procedures. The first stored procedure (s_proc1) calls a second stored procedure (s_proc2). I want to assign the value returned from s_proc2 to a variable in s_proc1. Currently, I'm calling s_proc2 (inside s_proc1) in this manner: EXEC s_proc2 @SiteID, @count = @PagingCount OUTPUT s_proc2 contains a dynamic query statement (for reasons I will not outline here). CREATE dbo.s_proc2 ( @siteID int, @count int OUTPUT ) AS DECLARE @sSQL nvarchar(100) DECLARE @xCount int SELECT @sSQL = 'SELECT COUNT(ID) FROM Authors' EXEC sp_ExecuteSQL @sSQL, N'@xCount int output', @xCount output SET @count = @xCount RETURN @count Will this result in @PagingCount having the value of @count? I ask because the result I am getting from s_proc1 is wonky. In fact, what I do get is two results. The first being @count, then the result of s_proc1 (which is incorrect). So, it makes me wonder if @PagingCount isn't being set properly. Thank you.

  Read the article

• Vector.erase(Iterator) causes bad memory access

  - by xon1c

  Hi, I am trying to do a Z-Index reordering of videoObjects stored in a vector. The plan is to identify the videoObject which is going to be put on the first position of the vector, erase it and then insert it at the first position. Unfortunately the erase() function always causes bad memory access. Here is my code: testApp.h: vector<videoObject> videoObjects; vector<videoObject>::iterator itVid; testApp.cpp: // Get the videoObject which relates to the user event for(itVid = videoObjects.begin(); itVid != videoObjects.end(); ++itVid){ if(videoObjects.at(itVid - videoObjects.begin()).isInside(ofPoint(tcur.getX(), tcur.getY()))){ videoObjects.erase(itVid); } } This should be so simple but I just don't see where I'm taking the wrong turn. Thx, xonic

  Read the article

• strange characters at beginning of file

  - by luca

  there are strange characters at the beginning of a file I'm editing (using textmate..) I don't know when they appeared, they're invisible in textmate but my script that reads the file goes crazy.. this is the first few chars in the file (as seen with od command): 0000000 177377 000120 000105 000117 000120 000114 000105 000072 the first 2 shouldn't be there I think.. maybe they were caused by some strange dropbox sync? Or something else.. but they tend to reappear (I don't yet know when..) My question: what is that 177377 and a simple way to remove it in my ruby script? thanks

  Read the article

• How can I receive the "scroll box" type scroll events from a DataGridView?

  - by Simon

  I have a DataGridView, and I'm listening to its Scroll event. This gives me a ScrollEventArgs object whose Type member is supposed to tell me the type of scroll event that has occurred. On the MSDN documentation page it says I should be able to detect movement of the scroll box by listening for events with types ThumbPosition, ThumbTrack, First, Last and EndScroll. However, when I drag the scroll box, I only get events of type LargeDecrement and LargeIncrement. How do I get access to the ThumbPosition, ThumbTrack, First, Last and EndScroll events?

  Read the article

• Reading bytes from JavaScript string

  - by Jan

  I have a string containing binary data in JS. Now I want to read, for example, an integer from it. So I get the first 4 characters, use charCodeAt, do some shifting etc. to get an integer. Problem is that strings in JS are UTF-16 (instead of ASCII) and charCodeAt often returns values higher than 256. The Mozilla reference states that "The first 128 Unicode code points are a direct match of the ASCII character encoding." (what about ASCII values 128?) How can I convert the result of charCodeAt to an ASCII value? Or is there a better way to convert a string of four characters to a 4 byte integer?

  Read the article

• Optimizing NSNumber numberWithInt:

  - by Riviera

  I am profiling an iPhone app and I noticed a strange pattern. In a certain block of code that's called quite frequently... [item setQuadrant:[NSNumber numberWithInt:a]]; [item setIndex:[NSNumber numberWithInt:b]]; [item setTimestamp:[NSNumber numberWithInt:c]]; [item setState:[NSNumber numberWithInt:d]]; [item setCompletionPercentage:[NSNumber numberWithInt:e]]; [item setId_:[NSNumber numberWithInt:f]]; ...the first call to [NSNumber numberWithInt:] takes an inordinate amount of time, in the order of 10-15x that of the remaining calls. I've verified that the results are consistent if I shuffle the lines (the first line is always the slow one, by the same ratio). Is there something going on that I'm not aware of? Perhaps this happens because this block is inside a try/catch?

  Read the article

• jquery .before() if class isn't present

  - by Afonso Gomes

  Using pagination, I have a div structure like so in the first page: <div class="ctema">...</div> <hr /> <div class="ctema">...</div> <hr /> <div class="ctema">...</div> <hr /> But with a jquery script to fetch content via AJAX... the following pages have only: <div class="ctema">...</div> <div class="ctema">...</div> <div class="ctema">...</div> I tried this: $('.ctematicas').before('<hr />'); But this doesn't checks if the HR tag is there or not and after 5 dynamic reloads In the first page I have 5 HR in a row ... How can I check if the HR tag is present between classes CTEMA and add one if not present?

  Read the article

• Reusing an anonymous parameter in a prepared statement

  - by Chris Lieb

  I am customizing the insert SQL generated by hibernate and have hit an issue. When Hibernate generates the query by itself, it inserts data into the first two columns of the table, but this causes a database error since all four columns of the table are non-nullable. For the insert to be performed properly, it must insert the same data into two columns of the new record. This means that I need Hibernate to bind the same data to two different parameters in the query (prepared statement) that I am writing. Is there some SQL syntax that allows me to refer to anonymous parameters bound to a prepared statement in an order different from which they are bound? Details REF_USER_PAGE_XREF ---------------------------------------- PK FK1 | NETWORK_ID | VARCHAR2(100) PK FK1 | PAGE_PATH | VARCHAR2(1000) | USER_LAST_UPDT | VARCHAR2(100) | TMSP_LAST_UPDT | DATE insert into REF_USER_ROLE_XREF( NETWORK_ID, PAGE_PATH, TMSP_LAST_UPDT, USER_LAST_UPDT) values ( ?, /* want to insert the same data here */ ?, ?, /* and here */ (select to_char(sysdate, 'DD-MON-YY') from dual) I want to insert the same data into the first and third anonymous parameters.

  Read the article

• IPP Printing from Windows 7 Ultimate

  - by Casey

  I have network IPP working on Ubuntu and Windows XP. On my Windows 7 instance, it refuses to acknowledge the remote server connection. Can anyone suggest how to configure this correctly? My install steps are: Add Printer Add a Local Printer Create a New Port and "Standard TCP/IP Port" Enter hostname http://host:631/printers/Printer_Name After that it says the printer is not detected, asks me to pick a driver, and finish up. Trying to use the device does not produce any output? If anyone has got this work, I would really appreciate a fix.

  Read the article

• Mysql Limit column value repetition N times

  - by Paper-bat

  Hi at all, is my first question here, so be patient ^^ I'll go directly to problem, I have two table Customer (idCustomer, ecc.. ecc..) Comment (idCustomer, idComment, ecc.. ecc..) obviosly the two table are joined togheter, for example SELECT * FROM Comment AS co JOIN Customer AS cu ON cu.idCustomer = co.idCustomer With this I select all comment from that table associated with is Customer, but now I wanna limit the number of Comment by 2 max Comment per Customer. The first thing I see is to use 'GROUP BY cu.idCustomer' but it limit only 1 Comment per Customer, but I wanna 2 Comment per Customer.. how now to proceed?

  Read the article

• Cell contents changing after I select rows present outside its height?

  - by wolverine

  I have set the size of the tableView that I show as the popoverController as 4*rowheight. And I am using 12cells in the tableView. Each cell contains an image and a label. I can see all the cells by scrolling. Upto 5th cell its ok. After th2 5th cell, the label and the image that I am using in the first four cells are being repeated for the remaining cells. And If I select the cell, the result is accurately shown. But when I again take the tableView, the image and labels are not accurate even for the first 5 cells. All are changed but the selection is giving the correct result. Did anyone got the idea what the problem is??

  Read the article

• Event firing sequence for a submit button.

  - by JSTyro

  Say a submit button has a click event handler as well (yes, it's wrong, but that's really the code I'm working on). And the click handler sets a value in a field of the form that's about to be submitted. So when the submit button is clicked: What will fire first, the form submit event or the click event? Will the value set in the form field by the click event submitted to the server? I think this depends on the answer to Q1. If the form is posted first, I'm guessing it won't. Note: I'm not looking for alternatives and advice. I know what the proper way of handling this will be. Just trying to understand the sequence of events and their implications.

  Read the article

• What are the recognized ways to increase the size of the RAID array online/offline?

  - by user149509

  Is it possible, in theory, increase the size of the RAID-array of any level just by adding new drive(s)? Variant like "backup whole data - delete old array - add/replace disks - create new array - restore data" is obvious so what are the other options? Does it depend on the RAID-level only or on the implementation of RAID-controller only, or on both? Adding new disks to a striped array necessarily leads to a rebuilding of the array with the redistribution of the strips to the new drives? What steps should be done to increase size of RAID-array in online/offline scenarios? Especially interesting RAID-5 and RAID-10. I would like to see the big picture.

  Read the article

• MySQL Join Comma Separated Field

  - by neeraj

  I have two tables. First Table is a batch table that contain comma separated student id in field "batch" batch -------------- id batch -------------- 1 1,2 2 3,4 Second Table is marks marks ---------------------- id studentid subject marks 1 1 English 50 2 2 English 40 3 3 English 70 4 1 Math 65 5 4 English 66 6 5 English 75 7 2 Math 55 How we can find those students of first batch id =1 who have scored more than 45 marks in English without using sub query. Problem i found to get this done using a single query is that we can not use IN as an association operator in JOIN statement What changes are required in below query to make it work? SELECT * FROM batch INNER JOIN marks ON marks.studentid IN(batch.batch) where batch.id = 1

  Read the article

• What is the purpose of using -pedantic in GCC/G++ compiler?

  - by huahsin68

  Hi, -ansi: tells the compiler to implement the ANSI language option. This turns off certain "features" of GCC which are incompatible with the ANSI standard. -pedantic: used in conjunction with -ansi, this tells the compiler to be adhere strictly to the ANSI standard, rejecting any code which is not compliant. Text above is extract from this note. First thing first, what is the purpose of usage of -pedantic and -ansi option with GCC/G++ compiler, I couldn't understand the above description. Can anyone tell me the circumstances of using the above two options? When should I use it? Is it important one? THanks @!

  Read the article

• Enabling Office SharePoint Server Publishing Infrastructure Breaks Navigation

  - by swagers

  I'm migrating from WSS 3.0 to MOSS 2007, below are the steps I took to migrate. Backed up the content database of our WSS 3.0 site. Restored the database on our MOSS 2007 database server Create a new Web Application on our MOSS 2007 server and pointed the database to the newly restored database. Everything works correctly on the new server. I enabled Office SharePoint Server Publishing Infrastructure and navigations stops working correctly. Where it use to say Home it now says /. When I clicked on a link to any sub sites the top navigations reduces down to one button that says Error. Also any sub site navigation on the side bar reads Error. When I disable Office SharePoint Server Publishing Infrastructure everything goes back to the way it was.

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• Combining packages from different projects into a single project in eclipse

  - by primal

  Hi, As part of the Android application I am developing in eclipse, I need to combine two packages from different projects into a single project. I tried copying the files in the package of the second project under the src folder of the first folder and copied other files required for second package into the res folder of the first project. But the auto-generated Java files i.e R.java doesn't get updated on copying. I tried right clicking on the project and clicking on Android Tools - Fix Project Properties. But nothing changed. Any pointers on what I am doing wrong much be appreciated.

  Read the article

• UITableView: Highlighted cell after switching back views

  - by Matthias

  Hi, I'm using a UINavController together with some UITableViews to display a kind of drill down for some data (e.g. like the Contact App). Works well. The only problem I have is, when I select a cell in the first table view it is highlighted, then the view switches to the next level and then, if I go back to the first level, the cell is still highlighted. So, how can I reset the highlighting when switching back? Thanks for your help. Regards Matthias

  Read the article

• Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

  - by Ace Paus

  I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

  Read the article

• MySQL/PHP: How to insert logged in user id into another table that is gathering data from a form tha

  - by Lisa

  For the first time I am needing to join information from two tables and am quite nervous about doing it without any advice first. Basically, I am building a secure site that is accessed by authorised users. I have my login table with user_id, username, password Once the user is on the site, they have the option of inputting data into another table called input. At the moment this table only captures the information that is entered, not the user_id or username of the inputter. I would like the form to be able to input the user_id and/or username from the login table into the input table. Please could somebody talk me through this process? I am sure that once this is amended, I will then be able to use the table to only allow the logged in user to access the information that he or she have inputted, is that correct? Many thanks

  Read the article

• Rails + Passenger CSS problem

  - by Dan

  I'm trying to deploy my first Rails app. At first, I was getting the following error: ActionView::TemplateError (Permission denied) I set the permissions of the stylesheets folder to 777 (just for now until I work out what's going wrong) and the application started to work. However, it is not picking up any of the stylesheets (everything is displayed in plain text). If I view the source code and click the CSS links, I just get a blank page. Javascripts however, seem to be working just fine. VHost Config: <VirtualHost *:80> ServerName xxxx.xxx.com DocumentRoot /home/myapp/public <Directory /home/myapp/public> Allow from All AllowOverride all Options -MultiViews </Directory> </VirtualHost> Can anyone help? Any advice appreciated. Thanks.

  Read the article

• Will I use HtmlDocument even I want to parse the HTML string using HtmlAglityPack ?

  - by skhan

  Hi everyone, I'm working in C#. I'm trying to extract the first instance of img tag from a HTML string (which is actually a post data). This is my code: private string GrabImage(string htmlContent) { String firstImage; HtmlAgilityPack.HtmlDocument htmlDoc = new HtmlAgilityPack.HtmlDocument(); htmlDoc.LoadHtml(htmlContent); HtmlAgilityPack.HtmlNode imageNode = htmlDoc.DocumentNode.SelectSingleNode("//img"); if (imageNode != null) { return firstImage = imageNode.ToString(); } else return firstImage=" "; } But it gets null in htmlDoc, will I use the HtmlDocument type even if I'm trying to parse the HTML from a string ? P.S btw is it the correct way of grabbing the first instance of image tag from my HTML string?

  Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >