Search Results

Search found 22357 results on 895 pages for 'virtual member manager'.

Page 378/895 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

• IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

  - by NVRAM

  I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• how to import existing VM in vmware workstation 8 inventory

  - by Wimmel

  I like to add existing vmware (player) virtual machines to the vmware workstation 8 inventory on linux. When I create a new virtual machine, it is stored in /var/lib/vmware/Shared VMs/. But copying new directories to that folder, does not make them appear in the workstation window. I found out, the inventory is stored in /etc/vmware/hostd/vmInventory.xml; <ConfigRoot> <ConfigEntry id="0000"> <objID>1</objID> <vmxCfgPath>/var/lib/vmware/Shared VMs/test 1234/test 1234.vmx</vmxCfgPath> </ConfigEntry> </ConfigRoot> But I don't know if I break anything when adding entries myself, and giving it an unique ID. Besides, adding a large number of VMs this way is a bit cumbersome. On ESX, it was possible to use vmware-cmd -s register, but I don't have a vmware-cmd installed. In another question it was suggested to use vmware converter. But vmware converter 5 (on windows) only allows a destination file location when I select workstation as destination type. When I select vmware infrastructure as destination type, it says the destination is unsupported; it required vmware vcenter server.

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Doesn't work Nginx + SSI

  - by boopidoopi

  I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

  Read the article

• No network connection for vmware esxi guests

  - by JavaDev

  I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

  Read the article

• Apache, logerror and logrotate: what is the best method?

  - by OlivierDofus

  Here's a vhost example of my sites: <VirtualHost *:80> DocumentRoot /datas/web/woog ServerName woog.com ServerAlias www.woog.com ErrorLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/error_log 86400" CustomLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/access_log 86400" combined DirectoryIndex index.php index.htm <Location /> Allow from All </Location> <Directory /*> Options FollowSymLinks AllowOverride Limit AuthConfig </Directory> </VirtualHost> I've got 12 sites running now. This gives something like: [Shake]:/sources/software/mod_log_rotate# ps x | grep rotate /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 [snap (as many error_log as virtual hosts)] /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 [snap (as many access_log as virtual hosts)] grep rotate [Shake]:/sources/software/mod_log_rotate# !!! I've been looking everywhere but I've only found mod_log_rotate. The "little" problem is that the author (very good C developper) explains: "Unfortunately Apache error logs are handled in such a way that we can't work the same log rotation magic on them. Like transfer logs they support piped logging though so you can still use rotatelogs for them. " So my question is: what would be the best way to handle multiple logs? If I just do a very classical log and I use the system's "logrotate" program couldn't this be a good deal? How would/do you deal with that? Thank you!

  Read the article

• How to find the IP Address of a vm running on VMware (or other methods of using VM)

  - by sixtyfootersdude

  I am running VMware Workstation on a Linux box. When I power on a centOS (Linux) virtual machine I cannot get mouse or keyboard control of the machine. I suspect that it has something to do with the error message: You do not have VMware Tools installed in this guest. Chose "Install VMware Tools" from the VM menu. If I click on that menu option it inserts a virtual cd with drivers etc. This does not help me since I don't have keyboard or mouse control over the machine. I was thinking that if I could figure out the IP address or hostname I could use any number of protocols to get into the machine (SSH comes to mind). How can I get the IP address or hostname of this machine? Note: I did not create this machine. A coworker created it who is no longer with the company. Would save me a lot of time if I could get into the machine. I have login credentials so that won't be a problem.

  Read the article

• Per-mailbox IMAP settings in Exchange 2003 apply successfully but revert to server default

  - by erictheavg

  The title says most of it. I have a Spiceworks mailbox that connects to our Exchange Server 2003 box via IMAP for receiving help desk issues. But for complicated reasons, I want it to receive those emails in text-only format. So, I discovered that you can just go to: Exchange System Manager Administrative Groups First Administrative Group First Storage Group Mailbox Store Mailboxes Right-click the mailbox, Configure Exchange Features Edit the properties for IMAP Set that mailbox to only receive message bodies as plain text. I click OK, then Next, it reports success, and I assume I'm done. But then when I go right back to where I was, I see that "Use protocol defaults" is still checked. Anyone have a clue why this would be? Some other details: I'm logged in as Administrator when I do this. I can't change this setting for the entire IMAP virtual server because some regular users use it. I only have one IP address to play with, which means I can't create another IMAP virtual server. Any suggestions or ideas are greatly appreciated!

  Read the article

• Cannot terminate process, "already terminated"

  - by felix-freiberger

  On Windows 8, I regularly get processes into a state where I can't terminate them. Skypekit.exe seems to be the process that's most likely to trigger that issue, but other processes can do that, too. When I try to terminate these processes, I sometimes get an "access denied" message, sometimes nothing happens - but every following attempt to kill that process results in an "access denied" message, too, even though I... have administrative rights (and ran the task manager with it) own that process have the right to terminate it "Process Hacker 2" shows a more detailed error message, stating that I couldn't terminate the process because it already is terminated. Still, the process is most definitely still there, because every task manager I tested still can see it. Process Hacker's "Terminator" is unable to kill such a process, but when running the "Close the process' handles" tactic, Process Hacker gets stuck himself, leaving its windows in "not responding". In that state, other task managers are in turn unable to kill Process Hacker. The only way I found to actually end these processes is to shutdown (which works without any problems). Why is this happening? How can I kill these processes?

  Read the article

• Managing SharePoint permissions via Active Directory?

  - by rgmatthes

  My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

  Read the article

• Laptop Synaptics Touchpad No Longer Functional After Windows 7 Upgrade

  - by Chance

  I have a Toshiba laptop, with an integral Synaptics (PS/2 port) touch pad, that I bought pre-installed with 32-bit Windows Vista. After doing a clean install of 32-bit Windows 7, I can no longer get the touch pad to respond. The function (FN) keys on the laptop still operate correctly, but they no longer display on screen when used. I have no way of knowing if the function key to enable / disable the touch pad is working correctly, although the function keys for dim / brighten display, as well as others, work fine. I have removed the device from the device manager and allowed it to reinstall with no success. I have removed the previous drivers and updated them with the current 32-bit Win7 compatible versions from Synaptics website, with no success. The Synaptics icon displays in the taskbar, and the touch pad is available in the Device Manager, both of which say the device is installed and working correctly. I have checked to make sure that the touch pad is enabled in the Synaptics menu, and have tried toggling enabled / disabled with no success. If anyone has any suggestions, or knows where I can find a solution, I would be very appreciative.

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Z.

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Network driver for Hyper-V restore from Windows Home Server

  - by Philipp Schmid

  I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

  Read the article

• Window too big to fit the screen!

  - by syockit

  I'm using Windows 7 on a 8.9' monitor with 1280x768 screen resolution. Using the might of arithmetics, I'm able to determine that my dpi (actually ppi) should be 167. Win7 is really helpful in that it doesn't have to restart to apply new dpi settings, unlike its predecessors (though I'd rather it applies straight away). The problem with small monitors in Windows is that when you come across windows too big to fit the screen, you can't move the title bar far above it. In X window managers I used in the past, you could alt-drag the window to anywhere you want, but in Windows, even if you alt-space and select move, it will automatically push the window back until the title bar is visible. I'm looking for a solution that either: allows me to move window freely without regard to titlebar visibility, or attach a scrollbar to existing window, or EDIT: create virtual desktops that allow me to span windows over 2 desktops, or EDIT 2: allow me to set larger virtual resolution, then pan & scan. EDIT 3: I found some progs that might do some of the above: 1) AltDrag allows me to drag, resize using alt and left/right mouse button. Neat! Best solution so far. 2) GiMeSpace Desktop Extender is supposed to allow me to scroll desktop. Didn't work. The other new version, GiMeSpace Ultimate Taskbar worked, but it destroys my Superbar, replacing it with its map.

  Read the article

• SQL Server 2008 services error on account

  - by TheDude

  I installed SQL Server Enterprise, but can't get it to work. It is a stand alone, on a laptop for development purposes. No network is involved, no other users. The OS is windows 7. Now, I keep receiving eventId 7000, which means that access is denied for the user (the user was Network Services). So, after reading up on it, I kind of got the idea that a user account should be created with minimal privileges. So, off I went and added a user, SQLservices. In the SQL Server Configuration Manager I right clicked SQL Server(MSSQLSERVER), and in the properties I added my new user. Well, here's mister eventId 7000 again. I don't get what I am doing wrong. Also, this new user ends up on my start-up screen. I don't think I want that... I mean, it would be weird to have x number of users crowding up my start-up screen just because I created those for my windows services... The error I get when I add the user in SQL Server Configuration Manager is as follows: Permission Denied. [0x80070005] Helps!

  Read the article

• How do I speed up and cache mmap file access over NFS on Linux?

  - by Zan Lynx

  The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

  Read the article

• Server redirect

  - by Tyy

  I have asp.net app XYZ which requires SSL. I am supposed to work with IIS that has only one Web Site - DefaultWebSite - containing multiple apps and virtual directories (3rd party). So, my app is located at domain.com/XYZ. I have to meet these conditions: 1.) requesting DefaultWebSite (domain.com) will run my app. It could redirect to ../XYZ, but I would rather not to. If it has to be done this way, requesting DefaultWebSite or my app over both HTTP and HTTPS will always ends up with redirecting to https://domain.com/XYZ 2.) I can't touch any other apps or virtual directories, can't create additional Web Site, can't set DefaultWebSite to require SSL, ... EDIT: 3.) transmitted data (GET or POST) must be preserved I tried to: set Web Site root directory to my app, but it this caused other apps to crash because of my Web.config (not sure why). set up HTTP redirect on DefaultWebSite to https://domain.com/XYZ. This seems to work correctly, but this doesn't work if user requests my app directly (redirected to domain.com/XYZ/XYZ, or redirect loop). set up Default Document, but this seems to work only if it is located in the Web Site root directory. I know I could write simple .aspx with Response.Redirect, but... is there any better solution? Am I missing something?

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• CentOS server. What does it mean when the total used RAM does not equal the sum of RES?

  - by Michael Green

  I'm having a problem with a virtual hosted server running CentOS. In the past month a process (java based) that had been running fine started having problems getting memory when the JVM was started. One strange thing I've noticed is that when I start the process, the PID says it is using 470mb of RAM while the 'used' memory immediately drops by over a 1GB. If I run 'top', the total RES used across all processes falls short of the 'used' listed at the top by almost 700mb. The support person says this means I have a memory leak with my process. I don't know what to believe because I would expect a memory leak to simply waste the memory the process is allocated not to consume additional memory that doesn't show up using 'top'. I'm a developer and not a server guy so I'm appealing to the experts. To me, if the total RES memory doesn't add up to the total 'used' it indicates that something is wrong with my virtual server set-up. Would you also suspect a memory leaking java process in this case? If I use free before: total used free shared buffers cached Mem: 2097152 149264 1947888 0 0 0 -/+ buffers/cache: 149264 1947888 Swap: 0 0 0 free after: total used free shared buffers cached Mem: 2097152 1094116 1003036 0 0 0 -/+ buffers/cache: 1094116 1003036 Swap: 0 0 0 So it looks as though the process is using (or causing to be used) nearly 1GB of RAM. Since the process (based on top is only using 452mb, does that mean that the kernal is all of a sudden using an additional 500mb?

  Read the article

• Did Adobe Photoshop just killed my Graphics Card for good?

  - by user6004

  I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

  Read the article

• disable specific PCI device at boot

  - by Rhymoid

  I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

  Read the article

• Setting up DNS using BIND

  - by dupdupdup

  i have troubles setting up my db files. Please kindly point me in the right direction! i need to define a nameserver that manage a domain example.org.au then i need it to have two records. one called server which is the ip address of current machine the other called www where www.example.org.au will be pointed to another ip address. i cant seem to get my system to work. This is my db.example.org.au file example.org.au. IN SOA server.example.org.au. ( 1; 3; 1h; 1w; 1h ) ; ; ;Host addresses localhost.example.org.au IN A 127.0.0.1 www.example.org.au. IN A 192.168.1.200 ; another virtual machine server.example.org.au IN A 192.168.1.199 ; current virtual machine If possible Please correct my errors! thanks! Any good guides out there? Thanks in advance ! :)

  Read the article

• Determining how all memory is used in Windows Server 2008

  - by Mojah

  Hi, I have a Windows Server 2008 system, which has 12GB of RAM. If I list all processes in the Task Manager, and SUM() the memory of each process (Working Set, Memory (Private Working Set), Commit Size, ...), I never reach more than 4-5GB that should be "in use". However, task manager reports this server has 11GB in use via the "Performance" tab. I'm failing in determining where all that used RAM is going. It doesn't seem to be system cache, but I can not be sure. It might be a memory leak in one of the appliances, but I'm struggling to find out which one. The server's memory keeps filing up, and eventually forces us to reboot the device to clear it. I've been reading up on how RAM assignments work on Windows Server: RAM, Virtual Memory, Pagefile and all that stuff: http://support.microsoft.com/kb/2267427 What's the best way to measure? http://www.zdnet.com/blog/bott/windows-7-memory-usage-whats-the-best-way-to-measure/1786 Configure the file system cache in Windows: http://smallvoid.com/article/winnt-system-cache.html But I fear I'm stuck without ideas at the moment.

  Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >