Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 379/1061 | < Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >

  • Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

    - by nmichaels
    I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

    Read the article

  • Two hosted servers, one public - VPN?

    - by Aquitaine
    Hello there, Web developer here who has to occasionally wear a system & network admin hat (small company). We currently have a single hosted server running Windows Server 2003 that runs both our web server (IIS/Coldfusion) and our database server (SQL Server 2008). We lock down the SQL server by allowing only specific IPs to connect to it. Not ideal but it's worked thus far. We're moving up to two distinct servers and I want to take the opportunity to 'get things right' and make only the web server face the public. What I need to be able to do is to allow only a handful of people to connect to the database server. Rather than using an IP allow list, I'd prefer to use a VPN to let people through so that access is based on the user and not simply the user's location. I'm leaning toward something like OpenVPN, just so I can stick with Server 2008 Web edition. Do I: Use the web server as a VPN server and set up the database server to only accept connections from the web server? Is there an extra step required to make connections to, say, db.mycompany.com route through the VPN rather than through a different connection? I'm ignorant of this part of network infrastructure stuff. Or, Set up a VPN server on the database server as the only public-facing server connection so that there aren't any routing issues to deal with? I know this is Network 101 stuff but I thought I'd ask before just blundering through it since it could affect the company a bit. Thanks very much!

    Read the article

  • Enable anonymous access to report builder in reporting services 2008

    - by ilivewithian
    I have a 2008 reporting services server installed on windows 2003 server. I am trying to allow anonymous access to the report builder folder so that my users do not have to select the remember password option when they login, if they are wanting to use the report builder. All I have found so far is that I should be able to do this with the IIS manager, but that only seems to work for reporting services 2005. Reporting services 2008 does not show up in the IIS manager, enabling anonymous access seems to be hidden somewhere else. How do I enable anonymous access to report builder in reporting services 2008?

    Read the article

  • How do I get a Wireless N PCi card to connect to a wireless G router?

    - by Andy
    I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • Any good PostgreSQL client for linux?

    - by senotrusov
    stackoverflow points me "belongs-on-serverfault" on this, so crossposting. I am frustrated of not having a good Linux GUI administration and development tool for PostgreSQL. pgAdmin III is buggy and unusable piece of... hmm, software, compared to Windows-only PostgreSQL Maestro and EMS PostgreSQL manager. phpPgaAmin does not looks promising. EMS PostgreSQL manager can work under Wine, but such setup have a number of issues. Requirements are: Table data editing and browsing for large tables (1M+), able to jump by FK or some master-slave editing, GUI filtering and so on. ER diagrams with in-place schema editing Schema editing and browsing with all useful GUI support Schema changes log to put into DB versioning (migrations script). Tabbed interface to be able to work with a number of tables and SQL queries at once. And so on. Any ideas?

    Read the article

  • Monitoring CPU Usage Over the Course of a Day?

    - by bobber205
    Are there any apps I an install on client machines that will generate a report for me what app used what % of the CPU. We have some machines that are running, at times, VERY slowly. The machine will run really poorly then boom, back up to full speed. There isn't usually enough time to check Task Manager real quickly to see what is running, not to mention the majority of the time there are people using the computer that don't know what the Task Manager is. ;) It would be really nice to take a look at some logs and see if, maybe, the anti virus is randomly taking alot of CPU for stretches of time. Or another application. Thanks! EDIT: This is for Windows XP. Sorry for the oversight. :)

    Read the article

  • SQL Server Agent refuses to start

    - by Geo Ego
    I'm having a problem with SQL Server 2005 where the SQL Server Agent suddenly refuses to start. If I attempt to start it through Services, I get the error "SQL Server Agent (MSSQLSERVER) service on Local Computer started and then stopped." In the Application log, I have the following entry: Event Type: Error Event Source: SQLSERVERAGENT Event Category: Service Control Event ID: 103 Date: 5/20/2010 Time: 11:07:07 AM User: N/A Computer: SHAREPOINT Description: SQLServerAgent could not be started (reason: Unable to connect to server 'SHAREPOINT'; SQLServerAgent cannot start). This database has been running fine for four months. It contains a SharePoint configuration database, which two days ago stopped working, throwing me a message that the configuration database cannot be reached. It was then that I realized the SQL Server Agent was not running, and I have been unable to restart it. I have tried running it with both the local system account and the network service account, with the same results. So far, I have tried: Granting the administrators group, network service, and SharePoint SQL Server Agent account public and sysadmin roles on the database. Granting the administrators group, network service, and SharePoint SQL Server Agent account full permissions to the entire MSSQL directory and all files within. I still have no joy.

    Read the article

  • How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

    - by Paul Hale
    I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

    Read the article

  • How to troubleshoot down terminal service/CITRIX sessions, when the process just won't terminate?

    - by Chad
    Running a CITRIX presentation server farm, version 4.5.6 on Windows 2003 sp2. In the CITRIX Access Management Console, I sometimes get a session that shows it's in a down state - but has none of the normal info associated with it (user name, applications, client name, idle time, etc...). It does say which servers it's on, so I check out that server's terminal services manager. I can see the down session but cannot reset it. I get: (Error 7024 - the requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.) So I go to the task manager and look up the processes running under that session id. I see it's one of my published apps, but when I try to end the process - it simply does nothing and the process remains. Any way to get rid of these sessions without a server reboot?

    Read the article

  • Route traffic from one VPN to a second VPN

    - by Dominic
    I have set up an OpenVPN server on my windows 7 64-bit PC. I also have a subscription to a VPN service. My aim is to be able to connect my android phone to the VPN server on my PC, and then route all traffic through the VPN service. I have a NetGear WPN824 router. I can get it working if I my phone is on my local network. Then I can connect my phone to the VPN server using the local IP address of my PC. In Network Connection in the control panel, I share the connection used by the VPN service with the connection used by the VPN server. Then when I browse the internet on my phone, all traffic goes through the VPN service. Very nice. But if my phone is outside my local network, so I have to connect my phone to the local VPN using my PC's external IP address, then this method doesn't work. If I connect my PC to the VPN service and then try to connect my phone to my own VPN, it just doesn't connect (the initial TLS handshake times out). If I connect my phone to the local VPN first, then this connection is lost as soon as I connect my PC to the VPN service. Does anybody know how I can get this working? Many thanks Dominic

    Read the article

  • Active directory Kerberos OSX problems

    - by Temotodochi
    I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

    Read the article

  • Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

    - by Adam Driscoll
    I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

    Read the article

  • Virtual machines interconnection inside Proxmox 2.1 Cluster

    - by Anton
    We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

    Read the article

  • Very slow browsing shared folder XP client/host

    - by Ickster
    I have a pretty straightforward setup where I'm storing media files on an XP pro machine, and sharing the folder to be accessed by other XP pro machines around the house. (Typically, there's only one client accessing the share at a time, although there may be several with the share mounted.) It's been working just fine for years, but I've recently started having some problems. A couple of days ago, the host PC had power disconnected while it was running. It was restarted and everything seemed fine initially, but since then browsing the shared folder from client machines has been extremely slow and actually reading data is all but impossible. The problem exists in every access method I've tried: Windows Explorer, VLC dialogs, command line, etc. My first thought was that the disk was experiencing problems, but there are no problems viewing the files locally on the host machine. My second thought was that there was a network problem on the host machine, so I removed and reinstalled drivers for the NIC with no change. My third thought was that there might've been a problem elsewhere on the network, so I swapped out hardware to no avail. I'm regrouping and trying to come up with a methodical approach to figuring out what might be wrong. I would of course be thrilled if you can suggest specific problems (Microsoft KB articles, etc.) that I might check, but I'm not expecting a silver bullet. If you can help me outline an approach to identify the problem (including recommended tools, e.g., disk checkers, network analyzers, etc.) I'd greatly appreciate it.

    Read the article

  • printing parallel over ethernet cable

    - by Crudler
    I have a bit of an interesting challenge :) I have a machine with a parallel printer output, i want it to be able to print instead to a printer in a different room and i know that parallel isnt great over big distances. i found this: http://www.amazon.com/over-Cat5-Extension-Cable-Adapter/dp/B002WJ9S6Y%3FSubscriptionId%3DAKIAINHICTCYYZGJWT4Q%26tag%3Dusbprintercables.net-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB002WJ9S6Y which will let me connect over cat5, but its usb to cat 5. my machine can only output on parallel (its not a computer) so what i was thinking of getting is a parallel(f) to usb and usb to parallel (M) for either side i.e. machine - parallel - usb - cat5 - usb - parallel -printer just seems a bit messy :) suggestions? another thing i would like to try is to get rid of the old school parallel printer and instead use a network based multi function. would this be possible? i.e. machine - parallel -usb - cat5 - ethernet print server - network printer this might be rougher because the machine cannot "know" that we are using a network printer. it can ONLY print to LPT1 Thanks!

    Read the article

  • arp requests are sent continuously and my linux machine disconnected to the world

    - by sees
    I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

    Read the article

  • Redirect specific domains with DNS

    - by user66377
    Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

    Read the article

  • apache authentication

    - by veilig
    I'm trying to set up a local webserver on my network. I want to be able to be able to access the webserver from any machine inside my network w/out authenticating. and two extra domains need access to it w/out authenticating. Everyone else I would like to authenticate in. so far, I can get to it from inside my network. and the two extra domains can access my webserver, but everyone else is just hanging. They don't get an authentication or anything. can anyone tell me what I'm doing wrong here? This is part of my apache's site-available file so far: <Directory /path/to/server/> Options Indexes FollowSymLinks -Multiviews Order Deny,Allow Deny from All Allow from 192.168 Allow from localhost Allow from domain1 Allow from domain2 AuthType Basic AuthName "my authentication" AuthUserFile /path/to/file Require valid-user Satisfy Any AllowOverride All <Files .htaccess> Order Allow,Deny Allow from All </Files> </Directory>

    Read the article

  • RRAS Public Address Pool on Windows Server 2008

    - by Art
    I have a Windows 2008 server with two NICs running RRAS and a small public website. It also does NAT for several other PCs on my network and everything works great. I have a block of 5 public static IPs from my ISP, one of which is bound to the public NIC in the Windows 2008 server. I would like to assign one of the remainging 4 public IPs to a machine on my private network. I thought I could do this by going into RRAS, selecting NAT under IPv4 and then adding the public IP address to the address pool and specifying a reservation for the machine I would like to use that address by adding its private ip address. When I do this, the machine I reserved the public IP address for seems to loose all outside network connectivity. I can still ping other PCs on my 192.168.0.* net, but anything outside is no longer reachable. When I remove the reservation, everything seems to work. After setting the reservation and right clicking on the external public interface and selecting 'Show Mappings' I can see outbound requests from my private address with the desired associated private address, however I do not see any inbound requests. What am I doing wrong/missing?

    Read the article

  • Multicast image restoration with adaptive speed

    - by Clinton Blackmore
    I'm curious to know if there are any tools for restoring disk images (or even transferring files) via multicast -- for any platform, especially if the project has source available -- where the multicast rate adjusts itself on the fly. On the Mac, all multicast solutions I am aware of (such as Deploy Studio, and NetRestore before it) make use of multicast ASR (apple software restore), which has one glaring deficiency -- you have to set the multicast speed before you start sending a disk image over the network, and that speed is locked in. Either your clients can keep up and restore, or they can't*. It seems to me that it must be possible for the multicast server to adjust the data rate, so you basically say "start sending this image", clients connect, and, if they can't keep up, they tell the server so it slows down. (Likewise, I'd expect the server to try speeding up if no client is having difficulties keeping up, and I'd expect to be able to cap that maximum throughput so that other network activities can go on without being resource starved.) So, what sort of tools are out there? For Linux? Windows? Is there something for the Mac I've overlooked. [It just kills me that it is true that, by the time you get multicast up and going at a good speed to restore a lab, you could've unicasted the data to all the computers and be done.] * There is a little leeway involved. I think individual clients can say, "I missed a little bit of data" and get it, and they can opt to listen in the next time the image is sent over the network, but on the whole, if they missed it the first go round, you have to image the machine again, and there is no time savings.

    Read the article

  • how does a computer know which IP address will route information to the internet? [closed]

    - by JohnMerlino
    Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

    Read the article

  • Flash player, HD videos and games are choppy

    - by Aimad Majdou
    I have a problem with flash player. HD videos from Youtube or Vimeo and flash games do not play smoothly. I'm using Flash player 11, Windows 7 Sp1, and my graphic card is Intel GMA 4500. Device Manager shows me that all drivers are installed on my computer, so i don't have any problems with drivers. When I run Google chrome, Resource Monitor shows me 15% ~ 40 % of CPU Usage and 40% used Physical Memory, but when I watch a video on Youtube or play a Flash game, the Resource Monitor shows 70% - 90% CPU Usage. Also, when I run some HD Video (Frame width : 1920, Frame height : 1080) on my computer, Device Manager shows me 80% ~ 100% of CPU Usage. before I Reinstall Windows 7, HD Videos and flash games were play smoothly I hadn't any problem with them !! I hope all these informations are enough to answer my question.

    Read the article

  • Windows Server 2003 R2 sp2 and Exchange 2003 - missing pop-up menu "Exchange Tasks"

    - by Denis
    I need to recover database. That's what i doing step-by-step: - In Exchange System Manager check the server - Create new Recovery Storage Group - Add Database to recover - Mount store for it Database (Mailbox Store) - all finish successful Next step - I need check user and in pop-up menu click on "Exchange Tasks...", but in menu i see only "Help". Main question - why I have not "Exchange Tasks" and how I can get it? But I can see "Exchange Tasks" in "First storage Group"-Mailbox-User. Sorry for my bad English. Thanks, Denis

    Read the article

  • Fixed expired accounts in Oracle 11g

    - by Álvaro G. Vicario
    I have an Oracle 11g server that's used for PHP development. Recently, I had a problem logging into the Enterprise Manager due to expired passwords. I've already changed settings so passwords no longer expire and I've unlocked all users. However, the user manager shows most built-in users as expired. How can I fix that? (If I just set a password for each expired account I guess that whatever services are using it will no longer be able to log in.)

    Read the article

< Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >