Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 38/82 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Ubuntu 12.10 not properply working on Asus u46E after Update

  - by John Oakland

  I recently installed the latest Ubuntu update on my laptop and since then, the alignment on the browser is messed up, the mouse is not working, and I can't connect to the internet. Before it was working perfectly. Any ideas on what to do? Thanks for any feedback FYI: I am right now using windows since I have both linux and windows on my laptop. Also, when booting I do have the option to boot previous ubuntu versions, when I boot the previous unbuntu version on my laptop, everything works accept except the internet. (the mouse works, alignment is proper)

  Read the article

• How do I increase the touchpad sensitivity on Acer Aspire One 532h?

  - by Yossi Farjoun

  I got a cheap netbook and put ubuntu on it without even booting into the windows it came with. I am now slightly regretting it since the trackpad is very annoying, it only registers when I press quite hard on it, and even then the motion is so slow that I must drag me poor finger 3 times to get the pointer to move up or down that tiny screen. OK. enough rant. now business: I went into the setting and increase sensitivity and acceleration to high. No difference. the behaviour did not change at all. So now my questions are: Is this a hardware problem? Is there a program I can run to see what input the trackpad is receiving? so I know if it can, in theory, read the light touch and not only the heavy, sandpaper-your-fingertips-off touch? is there some manual setting that the system might not be setting correctly and which I could change from the terminal?

  Read the article

• Hiding images in folder without renaming or moving the files

  - by Marcus

  I'm dual booting Ubuntu with Windows and I have all my music on a separate harddrive. In Windows the album art is hidden by default but when I access the folder in Ubuntu there is two album artwork files for every mp3, one small and one large. I would like to hide those images without having to rename them with a dot before or moving them to some other folder becuase then the album artwork would dissapear in Windows. Is there a way to make a .hidden file which hides all images or any other way which hides all images in nautilus?

  Read the article

• How to fix slow wireless with Intel 4965 AGN? [closed]

  - by mikewhatever

  Possible Duplicate: Slow wireless with an Intel 4965 We run Ubuntu 12.04, 32bit, with the current kernel 3.2.27-generic on an MSI EX700. I've already added the 11n_disable=1 tweek, without whcih, wireless has been unusable. Now, it works OK, but speedtest shows: Windows XP - down 11.68mbps, up 2.07mbps Ubuntu 12.04 - down 2.06mbps up 2.0mbps We've disabled ipv6, tried static and dinamic IPs, tried both swcrypto=0 and swcrypto=1 options, none of whcih made any difference. The problem may be the symptom of high packet loss. For example, here's the output of iwconfig after booting and testing the speeds: wlan0 IEEE 802.11abg ESSID:"amu" Mode:Managed Frequency:2.462 GHz Access Point: 00:78:9E:FA:32:C8 Bit Rate=54 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=58/70 Signal level=-52 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:11 Invalid misc:3627 Missed beacon:0 I've posted a help request before with lots of technical info and outputs.

  Read the article

• Truecrypted Windows 7 missing in Grub2 after upgrade

  - by user287545

  I have an encrypted dual boot Windows 7/Ubuntu System and upgraded my Ubuntu today. Everything went smooth but my Windows is not shown in the Grub2-List anymore. Starting up I have the Truecrypt Bootloader and after entering the Password I get to Grub (now Grub2). There my Windows 7 entry is missing now. Here is my report: http://paste.ubuntu.com/7569182/ Updating Grub did nothing to it. My guess is that within Ubuntu it does not recognize my Windows Installation on sda1 anymore. I can't mount it aswell. I can only mount it via Truecrypt itself. I think I might have to manually insert the menu item for Windows into that Grub config file. I guess that after entering the password in the truecrypt bootloader it would be possible to start Windows if the item was there - just a guess though. Edit: I basically followed these steps to set up my system: Dual Booting Windows 7 with Ubuntu 12.04LTS with Truecrypt

  Read the article

• VirtualBox Port Forward

  - by john.graves(at)oracle.com

  A great new feature in VirtualBox 4.0 is the ability to use NAT networking and forward ports without needing to use ssh -L/-R tricks.  This is great for booting multiple VM domains simultaneously.  It is possible to have several instances which map back to the host machine and different ports on localhost:* automatically forward to the correct VM.  This avoids the hassle of setting up dns entries or static IP addresses.In this example, I'm mapping the host ports 3xxxx to the VM's well known server ports.Note: It is important to setup the Frontend HTTP host/port to avoid incorrect URL rewriting.You may also need to setup an http channel to deal with local traffic which uses the network address 10.0.2.15Happy VMing.

  Read the article

• How do you dual boot Windows 7/8 seperatly with GRUB?

  - by Aaron

  I installed the beta version of Windows 8 and re-installed GRUB. When I boot my computer and select Windows 7, I get the new Windows 8 booting screen asking to boot between either Windows 7 or 8. If I choose Windows 7, my computer then restarts and I have to select Windows 7 again in order to boot into 7. But if I choose Windows 8 it boots right up. I understand I can choose which OS to boot by default, but I want my GRUB options to be the only way to choose between OS's. So my question is, how can I set this up so that when I click on Windows 7, I go there, and when I select Windows 8, I boot 8?

  Read the article

• Monitor Display issue

  - by dsiddens

  When booting I will have to boot maybe 3 or 4 times to get a screen that is not displayed diagonally or is not using the full screen width. Hardware specification: HP s7727c with AMD64 and NVIDIA chipsets and Insignia 22" monitor/TV. The Ubuntu version is 9.10 Karmic. I'd like to stay current with Ubuntu on this machine, but have gone down to 9.10 to get this described functioning. I tried higher versions and could not get past the "black screen" I think this issue is connected to the NVIDIA chipset/driver problem. I am a GUI user and I don't follow the other solutions posted which make use of the command line. I suppose if the command line solution could be given without making any assumptions of the receiving person's knowledge base, then even I and others like me, could implement it. Thank you for your time and assistance. Doug

  Read the article

• Lexmark X7170 shows documents as printed when they haven't

  - by Mehmet

  I made the move from Windows 7 to Ubuntu not dual booting because I have decided to quit gaming to spare more time for my studies. I just needed an OS for browsing the web and word processing etc. After I installed Ubuntu I installed the AMD GPU drivers, after which I clicked on the little printer icon, selected add printer and it found the drivers for the Lexmark 7000 series and I installed them. Now my problem is when I print something from Writer it processes it thinks its completed it, when in fact it hasn't printed anything. I tried printing a test page but it was stuck on processing for 5 minutes. I have restarted my computer and turned the printer on and off. I'm running 64bit if that changes anything.

  Read the article

• Restoring Grub after Kubuntu installation

  - by justquestions

  I installed Kubuntu on top of my existing Ubuntu 12.04 (64 bit) installation. During Kubuntu installation, I chose lightdm as my default display manager (instead of kdm). Now after rebooting, the Grub has a new color (gray instead of default purplish) and the screen while booting is gray (instead of purplish). I am curious if it is possible to change this grub behavior without removing Kubuntu. I did find a lot of discussion about modifying grub themes but they were not very useful because I do not know what is the default unity grub theme. I did reinstall grub but it didn't change anything. I tried the Grub Customizer but couldn't succeed. Thanks in advance!

  Read the article

• Are Sony Vaio S series or T series laptops compatible with both windows 7 and Ubuntu 12.04 in dual-boot installation

  - by rini

  I am planning to buy a new laptop which is suitable for both Ubuntu 12.04 and windows 7 in dual boot configuration. I am looking for Sony Vaio two models with configurations: 13.3" S series Customizable laptop ( SVS131190S) 3rd gen Intel® Core™ i5-3210M processor (2.50GHz / 3.10GHz with Turbo Boost) Intel® HD Graphics 4000 4GB (4GB fixed onboard + 1 open slot) DDR3-1333Mhz 500GB (5400rpm) hard drive 13.3" T series Customizable ultrabook 3rd gen Intel® Core™ i7-3517U processor (1.90GHz / 3.00GHz with Turbo Boost) Intel® HD Graphics 4000 500GB (5400rpm) + 32GB MLC hybrid hard drive with RAID 0 6GB (4GB fixed onboard + 2GB removable) DDR3-1333Mhz Can anyone please tell me which laptop will function better for dual booting? Any help/comments are really appreciated.

  Read the article

• How to add a command permanently to grub2

  - by tomodachi

  I have a fairly special setup, using Linux on a MacBook Laptop. to switch off my secondary graphics card in it I'm required to add these lines to my grub outb 0x728 1 outb 0x710 2 outb 0x740 2 outb 0x750 0 I do this by pressing 'e' for my selected grub menu option and adding the lines one by one . then finally booting . But as we know it's not permanent. I cant really figure out where i need to add it for grub to always append it to my Linux boot options. It's doesn't seem to belong in /etc/default/grub since here i can add stuff to the kernel boot line Honestly i'm afraid to fiddle to much with grub on my computer since getting it to triple boot Linux/Mac/Windows was a very delicate and timely matter. Does anyone have any idea of where to add it?

  Read the article

• Unable to boot 12.04 server: no LVM activated and impossible to mount /

  - by baronKarza

  I'm stuck in the Busy Box shell after upgrading from Ubuntu server 11.10 to Ubuntu server 12.04 64 bit. During the booting phase the system hangs while mounting root filesystem. My system is so configured: /dev/sda1 -- /boot /dev/mapper/vg-lv_root /dev/mapper/vg-lv_var /dev/mapper/vg-lv_tmp When the boot process fails and I'm forwarded to the busybox shell, if I type vgchange -ay I can mount my volumes and all it's OK. But it does not enable LVM automatically so that it is impossible to mount root, var, and tmp. I tried to start with a Knoppix, chroot, reinstall (aptitude) both kernel and lvm2 as suggested by this tread "Fixing unbootable installation on LVM root from Desktop LiveCD": nothing changed. I can't figure out what is the problem. Any suggestion is welcome. Thanks in advance.

  Read the article

• HP Pavillion laptop screen problems

  - by Liealais Vards Nekas

  Approximately after 4 days when I installed my Ubuntu 10.10 an interesting problem with my laptop screen starts. I had similar problem what you can see in this video - http://www.youtube.com/watch?v=jCYVfGVGWyY&feature=related - but it doesn't happen all the time. The most interesting thing is that, than I had that problem only when I turn my laptop screen in different angle. And this "bad" angle changes by the time, so after about 15 minutes after booting computer I can turn laptop screen in normal position. This is software or hardware problem? I'm using HP Pavillion dv9000.

  Read the article

• Running projects from NTFS partition on Ubuntu

  - by the_hamster

  I'm dual booting Windows 7/Ubuntu 12.04. I want to run C++/Java projects from a NTFS partition, where I keep generally all my files and projects. I fiddled with the fstab. One time I removed 'noexec', the other I changed it to 'exec'. After that,each time, I remounted the partition and it still didn't work. I tried using sudo mount -o remount,exec /media/mypartition It didn't work either. There was a somewhat similar question already, but it didn't have the proper answer for me or I didn't know how to make it work(note: I am a total newbie with Ubuntu and Linux in general).

  Read the article

• 12.04 LTS won't install from CD

  - by Rob Hays

  I've been trying to install 12.04 LTS onto a Dell with a PIII from CD. Booting from the CD the install gets through the "Who are you" process, begins copying files. The progress bar gets as far as the last period in "Copying files...". The box clears, and an error box comes up "The installer has encountered an unrecoverable error. A desktop session will now be run so that you may investigae the problem or try installing again." When I try to install from this desktop session, the install gets to the same point, the copying files box closes, and then just stops. The pointer is busy, the cd drive spins up occaisonally with no data transfer, no hard drive activity. When I boot from the CD and access the disk boot menu, the disk checks good, memory checks good ( I upgraded the original memory to 512 mb). I also updated the bios to the newest from Dell. This is an older L866r, but should meet the requirements.

  Read the article

• Ubuntu 12.04 using UEFI

  - by Daniel

  I want to upgrade my machine with a new Motherboard, RAM and Processor. I am planning on doing a clean install of Ubuntu 12.04. The Motherboard I want to use is an Asrock 970 Extreme4 which uses an AMI 32 MBit UEFI BIOS. My Question is, is there anything I have to watch out for during the installation process? Cause I have read that some people have trouble booting into ubuntu using a UEFI BIOS. Any advice? I don't want to spend all that money for the different parts only to find out that I can only use windows properly. Thanks in advance

  Read the article

• Windows 7 won't boot? Tried Boot Repair (dual-boot)

  - by user206870

  I downloaded Ubuntu and installed it so that my computer was dual boot. The first day, Ubuntu and Windows both worked great. Unfortunately, the next day, after messing around on Compiz Config Settings Manager to get the rotation cube, I tried booting into windows 7, and it wouldn't boot. It just goes to the screen where the Windows logo comes up and says Windows 7, and then reboots without even displaying an error message. I tried boot repair and it didn't work, the problem's still there. How can I fix this? PS: here's the link that boot repair gave to me: http://paste.ubuntu.com/6287090

  Read the article

• Boot Ubuntu on smartphone SD card?

  - by berad

  Now here's what I want: Ubuntu on the SD card that lives in my phone. I like using Ubuntu portably and my phone as a flash drive, but I haven't been able to make these work together yet. I've tried booting off my Huawei U8800 (Android 2.2) and Nokia E66 with a micro-SD card (with 11.10, boots OK in a card-reader) on an eeepc 901 without luck. The Huawei doesn't show up in the BIOS boot menu. BIOS sees the Nokia but halts at "Boot error". I guess this is related to the phone's flash drive emulation and how it handles bootsectors, but I don't know enough about how that works to go any further. Has anyone succeeded in this?

  Read the article

• Ubuntu 12.04 installation freezes at "Detecting File Systems"

  - by user67970

  I am installing Ubuntu 12.04 onto my system, which I am dual booting an already installed version of Windows 7 with. The installation goes fine until what I suppose is near the end of the entire thing, where it is at the page where it scrolls through the features of Ubuntu. At this point, it is saying: Detecting file systems... It will not go past this point, and it has been at this part for an hour and a half. What should I do to fix this? I am new to working with Linux operating systems, so please help!

  Read the article

• Not able to create Live CD

  - by Jagannath Harati

  I downloaded 12.04.1 on a Windows 7 machine. I burnt a DVD from the ISO image using Windows Disc Image Burner. I had 'verify disc' on. The disc was created successfully with no errors. I was not able to use this disc for installing Ubuntu on another Windows 7 machine. I do not get the Welcome Screen on booting. I find that on the disc I burnt, I do not find bin, disc tree, programs directories and cdromupgrade, start.*, ubuntu* files. I found the boot directory and WUBI executable file. I tried downloading several times with the same result. I had similar problem earlier with 11.04. Can you please let me where the problem is?

  Read the article

• How do I change the keyboard layout to a non-standard one on a Live (USB) session?

  - by Agmenor

  I am running Ubuntu 13.04 in a Live (USB) session. My physical keyboard layout is called Bépo, it is the French language Dvorak method-based layout. I would like to change my input layout to this too. To do this, I tried booting in a French spoken session, then open the Keyboard Layout preferences app. Normally, to add a layout, you should click on the + sign and select your layout. However the list that appears is very short and does not contain what I want. On the contrary, on a persistent non-live installation, the choice of Bépo is present. This is also the case during an installation of Ubuntu. So I do I change the keyboard layout of my live session to the correct one?

  Read the article

• Graphics corrupt after upgrade from 11.10 to 12.04

  - by RiaanZA

  I'm stuck at the moment with an ubuntu that boots into an unusable white screen after upgrading from 11.10 to 12.04. I've tried booting into safe X mode but it just throws me back to the safe menu every time. Restore previous graphics driver, use default graphics configuration and set up new graphics configuration all don't work either. I've tried various methods of resetting the graphics from the command line, but none are working due to unmet dependencies. These cannot be fixed by doing the normal "apt-get -f install" because its saying there is a dpkg error in var/lib/dpkg/status (blank line relating to skype-wrapper). I haven't been able to find any other way to fix the dependencies yet. Can someone please give me some advice on what to do, I really don't want to go the re install route.

  Read the article

• How do I add pcie_aspm=force to my boot options?

  - by nargo7

  I just upgraded to 11.10 from 11.04 on my laptop (I don't have Windows) by downloading from the Ubuntu website. The laptop battery is in bad condition, but I was using it with the 11.04 plugged to AC all the time, and everything was fine. After installing 11.10, the laptop seems to not notice that it is connected to AC, so it shuts down a few minutes after starting. I read that I have to type pcie_aspm=force in the boot command, so I tried accessing it by pressing the "F6" key while booting, and then the other F keys, but nothing happened. I also found that I can write that instruction in the terminal window, but I don't know in which file or location. I would appreciate some help, but I am not a computer engineer, so please write the instructions in plain English.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >