Search Results

Search found 17344 results on 694 pages for 'desktop clients'.

Page 38/694 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Freezes if desktop effects is used.

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• Freezes if desktop effects is used [closed]

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• No desktop after installation of nvidia drivers

  - by hovmand

  I have a problem very similar to this guy: Desktop does not show when I installed nvidia drivers!. I have the same problem with the desktop not being present when I install choose the nvidia drivers from the software sources dialog. I've trie the answer mark as the solution, but this doesn't help me. Still get the same result / bug. I've also tried just to reconfigure it, like this guy says: http://ubuntuforums.org/showpost.php?p=12303179&postcount=4, but that didn't help me either. Then someone suggested that I should try Bumblebee. I followed the installation (https://wiki.ubuntu.com/Bumblebee#Installation) and after the reboot the resolution was still crappy, but this time the desktop did show up, but with bad graphics and I couldn't use optirun and it turned out that bumblebee couldn't start. I hope someone might know whats wrong or what I'm doing wrong. I have a Lenovo W520 with a nvidia Quadro FX 880M and I'm running ubuntu 12.10

  Read the article

• Maximal screen resolution for external monitor breaks desktop

  - by Robiston

  Whenever I'm plugging in my external monitor into my notebook and changing the screen resolution to the maximum state, the desktop will get broken in a way: A third of the whole desktop space is not visible at all. I can see the whole panel as well as the Unity side bar to the left, but the desktop space with all the windows in it is not completely visible. It's blanked out. In case of opening the Unity menu bar, I can type something in it. As soon as close the menu bar, the upper part stays visible and hangs: Any ideas about that issue?

  Read the article

• Hulu desktop stopped working on my Dell

  - by jwdinkc

  After last weeks flash update Hulu desktop no longer works on my Dell laptop though it still works on my HP Desktop. Here's what CLI tells me on the Dell: Inspiron-1564:~$ huludesktop Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I tried: sudo apt-get install libvdpau_nvidia.so but got E: Unable to locate package libvdpau_nvidia.so and E: Couldn't find any package by regex 'libvdpau_nvidia.so' Hulu does work through the browser and through XBMC. XBMC just doesn't seem to match the video quality of the Hulu Desktop. I don't really know why a nvidia.so is needed for my Intel graphics that comes on Dell Insiron 1564's. anyway. So, do you guys have a solution?

  Read the article

• windows clients cannot get dns resolution until you open and close ipv4 properties page

  - by GC78

  This strange problem has started recently. Some windows clients cannot seem to get dns resolution to the internet after boot, and sometimes again at some point in the day. Internal hosts are also slow to resolve. trying to ping an interal host by name will take a long time for the hostname to resolve to ip address and trying to ping a website by name will fail to resolve. If you go into the tcp/ip v4 properties and view but not change anything, ok/close out of that then the client starts working fine, hostnames will resolve quickly. I have seen this happen on both Vista and W7 clients. ipconfig /all at a client experiencing this problem shows everything in order. proper ip addr, gateway, dns server, dns suffix ect.. ipconfig /dnsflush will not fix them, neither will /release and /renew the clients get their ip address, mask and dns server info from either one of 2 OES dhcp servers that assign addresses in different scopes in the same subnet. the internal dns server is a different OES dns server the default gateway is not assigned by the OES server but is statically put in at the client (only for those who need to get to the Internet for their job) flat network topology What can I do to get to the bottom of this? It only happens to a few of the client machines and typically the same ones. It started happening when we made a change to one of the DHCP scopes in iManager. Strangly this problem only happens to clients that get an IP address from the scope that we didn't make any changes to.

  Read the article

• NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

  - by Corey Kennedy

  What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help!

  Read the article

• wireless clients not getting correct dhcp addresses

  - by szeli

  I apologise first if this is a stupid problem. I'm new to Cisco networking. I need some help with an existing configuration done by my vendor. Environment: 1. Core switch - Catalyst 6509e vlans configured: a. vlan 50 (wired clients) 10.0.50.x/24 interface IP 10.0.50.20 b. vlan 70 (wireless clients) 10.0.70.x/24 interface IP 10.0.70.20 c. vlan 192 (guest clients) 192.168.1.x/24 interface IP 192.168.1.20 d. trunk port for WLC native vlan 70 allowed vlan 50, 70, 192 2. Cisco 4402 WLC interfaces a. management untagged IP 10.0.70.10 b. ap-manager untagged IP 10.0.70.11 c. service-port n/a IP 192.168.10.1 d. virtual n/a IP 1.1.1.1 e. guestwlan vlan192 IP 192.168.1.100 3. Cisco AIR-LAP1142N-S-K9 LAP01 (WLAN local, interface: management) IP 10.0.70.21/24 GW 10.0.70.20 DHCP server 10.0.50.10 (scope 10.0.70.101 to 200) LAP02 (WLAN guest, interface: guestwlan) IP 192.168.1.21/24 GW 192.168.1.20 DHCP server 192.168.1.10 (scope 192.168.1.101 to 200) here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200) can anyone please help? thanks!

  Read the article

• DirectX Desktop

  - by Jonathan

  Hi. I'd like to make an animated desktop background for Windows 7 using DirectX. I'm using C#, SlimDX and a couple of P/Invoke imports of Windows API functions. I'm not brilliant with native Windows programming, but I've had a poke around online and I believe what I need to do is either: 1) Find the handle of the window containing the dekstop wallpaper, hook it up to a DirectX device and draw into it. 2) Make a new output window, and insert it above the desktop wallpaper but below the desktop icons. I've tried both these, but neither seems to work. If I navigate the Window heirarchy starting from the handle returned by GetDesktopWindow(), I can go Desktop - WorkerW - SHELLDLL_DefView - SysListView32. If I hook up a DirectX device to this handle, I can draw over the entire desktop, but it also covers the icons. If I create a Windows form, set its parent to SHELLDLL_DefView using SetParent() and then use SetWindowPos to play with its Z-order I can only seem to get it to go either behind the desktop wallpaper or in front of the desktop + icons. It looks as though the desktop wallpaper is background to the folder view containing the icons, and therefore what I am trying to do cannot work. The only solution then would be to not use the desktop for icons, or to find some alternative, e.g. overwriting the desktop then overlaying a transparent window containing a view of the contents of some folder. Does anyone have any idea of what I should be doing, or even whether what I want to do is possible? It seems you can draw to the desktop background using the GDI (as I believe the wxSnow program does), and I've seen something similar to what I want done by VLC Media Player under Windows XP with its DirectX wallpaper mode (interestingly, I can't seem to get this option enabled on my system). Thanks!

  Read the article

• How to configure Remote desktop on window server 2008 R2?

  - by Abdullah BaMusa

  I’m trying to connect over internet to my home workstation which has Windows Server 2008 R2 (Web Edition) installed from my PC at work (Windows 7 installed on it) via Remote Desktop. I configure the workstation to accept remote desktop and I can connect to it from my laptop if I’m within same Home LAN but I can’t establish the connection from my PC at work . My question is: Is possible to connect to my workstation over internet using remote desktop? Is there any step by step resource the setup this feature?

  Read the article

• Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

  - by izn

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• Why does notepad crash on desktop files in the save-as dialog?

  - by deepc

  Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• How to distort the desktop screen

  - by HaifengWang

  Hi friends, I want to change the shape of the desktop screen, so what are displayed on the desktop will be distorted at the same time. And the user can still operate the PC with the mouse on the distorted desktop(Run the applications, Open the "My Computer" and so on). I think I must get the projection matrix of the screen coordinate at first. Then transform the matrix, and map the desktop buffer image to the distorted mesh. Are there any interfaces which can modify the shape of the desktop screen in OpenGL or DirectX? Would you please give me some tip on it. Thank you very much in advance. Please refer to the picture from http://oi53.tinypic.com/bhewdx.jpg BR, Haifeng Addition1: I'm sorry! Maybe I didn't express clearly what I want to implement. What I want to implement is to modify the shape of the screen. So we can distort the shapes of all the applications which are run on Windows at the same time. For example that the window of "My Computer" will be distorted with the distortion of the desktop screen. And we can still operate the PC with mouse from the distorted desktop(Click the shortcut to run a program). Addition2: The projection matrix is just my assume. There isn't any desktop projection matrix by which the desktop surface is projected to the screen. What I want to implement is to change the shape of the desktop, as the same with mapping the desktop to an 3D mesh. But the user can still operate the OS on the distorted desktop(Click the shortcut to run a program, open the ie to surf the internet). Addition3: The shapes of all the programs run on the OS are changed with the distortion of the screen. It's realtime. The user can still operate the OS on the distorted screen as usually. Maybe we can intercept or override the GPU itself to implement the effect. I'm investigating GDI, I think I can find some clue for that. The first step is to find how to show the desktop on the screen.

  Read the article

• What's the advantage of an Adobe AIR app over a traditional desktop app?

  - by John

  I'm pretty familiar with using Adobe Flex & AS3, and compared with writing apps in JS/HTML I think it's very cool. However, since AIR is essentially a non-browser version of Flex with benefits like local storage, it seems to be competing as a cross-platform desktop application platform... and in that space it's much less mature than more established desktop technologies. So what's the advantage of creating a desktop application using AIR compared to something like Java (or C++ using a cross-platform GUI library like wxWidgets)? Java's equally capable of communicating with the server for instance, I'm not quite sure what AIR adds when competing head-to-head in the desktop development world?

  Read the article

• Two tor clients

  - by Intellektus

  I have been experimenting with the thought of running two Tor clients at once on my machine. So I decided to try it and modified the source a bit to let me run two clients at once (of course with separate data dirs). But they both get the same exit node, and if I try to switch exit node on one of them via its control port, they both get switched. I have been experimenting with this some more, and Tor always seem to get the same IP, even if I run several separate clients (on the same machine) at once. Is this the expected behavior?

  Read the article

• Getting NFS clients to retry mount if NFS server down when client boots

  - by z0mbix

  I have an NFS server that several clients mount. I am using the following in my /etc/exports on the server: /content *(rw,no_root_squash) and on the clients in my /etc/fstab I have: content.prd.domain.tld:/content /content nfs rw,hard,intr 0 0 If the clients boot while the NFS server is down, the share does not get mounted. I read in the NFS man page that the retry defaults should handle this: retry=n The number of minutes to retry an NFS mount operation in the foreground or background before giving up. The default value for forground mounts is 2 minutes. The default value for background mounts is 10000 minutes, which is roughly one week. I have tested this, but it doesn't appear to work. Am I missing something? All servers are RHEL 5.4. Cheers z0mbix

  Read the article

• Windows clients not using NTP server provided via DHCP

  - by gencha

  I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

  Read the article

• Getting NFS clients to retry mount if NFS server down when client boots

  - by z0mbix

  I have an NFS server that several clients mount. I am using the following in my /etc/exports on the server: /content *(rw,no_root_squash) and on the clients in my /etc/fstab I have: content.prd.domain.tld:/content /content nfs rw,hard,intr 0 0 If the clients boot while the NFS server is down, the share does not get mounted. I read in the NFS man page that the retry defaults should handle this: retry=n The number of minutes to retry an NFS mount operation in the foreground or background before giving up. The default value for forground mounts is 2 minutes. The default value for background mounts is 10000 minutes, which is roughly one week. I have tested this, but it doesn't appear to work. Am I missing something? All servers are RHEL 5.4. Cheers z0mbix

  Read the article

• OS X clients ignoring Windows print server permissions

  - by Ilumiari

  I'm in the process of testing a Windows Server 2008 R2 print server for a mixed OS X/Windows environment. Any security permissions (AD groups) I set for the printers on the print server are not honoured by the OS X clients. Only if I remove absolutely all permissions for a given printer will an OS X client not print to that printer. The Windows clients honour the permissions as expected. The PrintService log doesn't record any activity when an unprivileged Windows client attempts to print, and records a typical print job when an unprivileged OS X client attempts to print. Has anyone encountered this problem before and have a fix? With 600-700 clients, a number of which are dual-booting, restricting by IP address is not viable. EDIT: The jobs are definitely going through the print server, they show up in the logs with their AD credentials.

  Read the article

• WDS - Clients receive Error: PXE-E53: No boot filename received

  - by Ninja2k

  I have setup WDS on Windows 2008 server in a Vmware box so I can practise setting up WDS,the server has DNS and DHCP as well as AD, the boot image is confirmed as working but when my clients try to boot up it does not work. I have checked the following: Clients can ping the WDS server. The WDS service is started Boot images for X86 and X64 are deployed. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE UseDhcpPorts has been set to 0 My clients just receive Error: PXE-E53: No boot filename received. Any idea what could be wrong?

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Windows clients cannot access machine running DHCP server

  - by science9712

  I'm trying to setup a small LAN, using an Ethernet switch, an Arch Linux server, and around 10 Windows XP machines. This network has no outside connections. The Arch machine has a self configured ip address (configured with ip addr add 192.168.0.1 dev eth0), and acts as a DHCP server(using dhcpd). This portion works great, windows clients get IP addresses, the correct gateway settings, perfect. However, the clients cannot connect to each other, or to the dhcp server. When I run ping 192.168.0.1 on any client, I get no response, same happens if I try to ping any other client. On the gateway machine, I can't ping any of the clients either. Any help would be much appreciated!

  Read the article

• Some Domain Clients unable to access certain websites

  - by Shaunie

  I have a small domain around 20 clients with a 2003 R2 SP2 DC. Most of my clients can browse the internet freely and dont have a problem. However a couple are reporting problems accessing certain sites. IE: Hotmail, skyscanner, bbc news They can browse the sites sometimes then other times they get 408\409 errors. other machines in the domain can access these sites. I have cleared out dns cache on these machines modified external dns servers on the DC still to no avail. The main issue is the person not able to access skyscanner uses it several times a day to book flights for employess going on leave or returning to work. both clients are running XP SP3 though one machine is getting change for one running win7 shortly. Any advice greatly appreciated. thanks

  Read the article

• Server 2008 DHCP some clients not getting IP

  - by AdminAlive

  Today (after turning on the server from an extended power outage) some clients are not able to get IP addresses. Some clients work just fine. Win 7 and XP doesnt seem to matter. I have tried flushing dns, renew, disabling APIPA and even assigned a static IP. Even with the static IP it acts as if it isn't on a network. You can't ping anything. I have also tried resetting the TCPIP stack. The clients that work can ping the DNS and DHCP servers fine. Any suggestions? Thanks

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >