Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 38/287 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• How to diagnose network speed drops

  - by Luis Alvarado

  Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

  Read the article

• Connectify Dispatch: Link All Your Network Connections into a Super Pipeline

  - by Jason Fitzpatrick

  Connectify Dispatch is a network management tool that takes all the connections around you–Ethernet, Wi-Fi nodes, even 3G/4G cellular connections–and combines them into one giant data pipeline. At its most simple, Connectify Dispatch takes all the network inputs available to your computer (be those connections hard-line Ethernet, Wi-Fi nodes, or cellular connections) and merges the separate data connections seamlessly into one master connection. If any of the connections should falter (like your 3G reception goes out), Connectify automatically shifts the data to other available networks without any interruption. In addition you can specify which network Connectify should favor with connection prioritization; perfect for using your cellular connection without breaking through your data cap for the month right away. Hit up the link below to read more about Connectify Dispatch and the companion app Connectify Hotspot. Connectify Dispatch Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• How to prevent wireless network asking password when briefly out of range

  - by Ian Mackinnon

  When I'm connected to a wireless network from quite far away I sometimes briefly lose the connection. Then Network Manager prompts me to re-confirm the password as if it suspected that was the problem that caused the loss of connection (the password is already filled in in the dialog box). Is this normal behaviour? Can I prevent it from happening and have Network Manager automatically reconnect without the password dialog box when the wireless network comes back into range? I'm using 10.04 (32bit, Gnome) on an Acer Aspire one.

  Read the article

• check support of Universal TUN/TAP Device on ubuntu 12.04

  - by nmaybar

  I am trying to setup Appgate Ip tunneling driver on my ubuntu 12.04 by following appgate instructions listed below: Installation, Linux Make sure the kernel has support for the Universal TUN/TAP device driver, and then log in as root and create a new directory somewhere, and copy the files ag_iptd add_route add_gw_route add_hosts_entry ag_iptd clean_hosts_file del_route del_gw_route del_hosts_entry interface_down interface_up remove_dns_server set_dns_server fix_localhost into that directory. Then start the IPTD daemon by doing modprobe tun <directory-somewhere>/ag_iptd There is also an init script 'ag_iptd.init' that can be installed to automatically start the IPTD daemon every time the OS is loaded.Please check the documentation of your Linux distribution on howto do this. so is there any way to checkif my ubuntu 12.04 kernel has support for the Universal TUN/TAP device driver? and how to do so? Thanks,

  Read the article

• Turning laptop into WAP using netgear WNA1100? (stuck at hostapd)

  - by Vivek Sharma

  I have a Netgear WNA1100 usb wifi adapter. I have installed Atheros driver from Forum Details (btw name of the file is ath9k_htc-installer.1.0.1-maverick-fixed.deb). I wish to make a setup like connectify(windows) on ubuntu, so that I can connect my phone wirelessly to my laptop via Netgear WNA1100 (behaving as AP) and eventually use internet via my wired lan. I have installed the above mentioned driver, hostapd and hostap-utils. Following is my hostapd.conf file. ssid=vks interface=wlan1 # The interface name of the card driver=ath9k_htc # The card driver macaddr_acl=0 accept_mac_file=/etc/hostapd.accept deny_mac_file=/etc/hostapd.deny ieee80211x=1 # Use 802.1X authentication auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP When i run sudo hostapd /etc/hostapd/hostapd.conf I get an error invalid/unknown driver 'ath9k_htc # The card driver I think the driver is installed fine, as i can see the blue led blinking on the netgear adapter, which was not blinking earlier. Can someone please guide me how to achieve this setup? I will appreciate an example hostapd.conf file with a simple wpa_psk security setup. Please be detailed and descriptive with commands. How to run and end it. Following is output from lsmod, i have only pasted the entries which had ath and ath related info. Which driver shall i use. Module Size Used by ath9k_htc 42903 0 ath9k_common 2563 1 ath9k_htc ath9k_hw 285176 2 ath9k_htc,ath9k_common ath 13001 2 ath9k_htc,ath9k_hw cfg80211 139811 3 ath9k_htc,mac80211,ath compat 4020 1 cfg80211 led_class 2633 3 ath9k_htc,thinkpad_acpi,sdhci Thanks.

  Read the article

• Not able to change brightness on a Compaq Presario CQ61

  - by jinu

  Here is my result of lsmod Module Size Used by joydev 17393 0 vesafb 13516 1 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec nvidia 10958194 42 snd_seq_midi 13132 0 arc4 12473 2 snd_rawmidi 25424 1 snd_seq_midi ath9k 117425 0 snd_seq_midi_event 14475 1 snd_seq_midi mac80211 436455 1 ath9k bnep 17830 2 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event uvcvideo 67203 0 rfcomm 38139 0 parport_pc 32114 0 ath9k_common 13781 1 ath9k snd_timer 28931 2 snd_pcm,snd_seq psmouse 87213 0 videodev 86588 1 uvcvideo snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq bluetooth 158438 8 bnep,rfcomm ppdev 12849 0 serio_raw 13027 0 ath9k_hw 391523 2 ath9k,ath9k_common ath 19387 3 ath9k,ath9k_common,ath9k_hw mac_hid 13077 0 binfmt_misc 17292 1 cfg80211 178679 3 ath9k,mac80211,ath snd 62064 16 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp r8169 56321 0 usbhid 41906 0 hid 77367 1 usbhid

  Read the article

• Cant get internet connection at all on Ubuntu 13.04

  - by James Ellis

  I installed Ubuntu 13.04 alongside my Windows Vista, at the start of installation it doesn't connect to the internet to download updates during installation, also during installation towards the end it removes a lot of stuff that i couldn't catch the details of at the time, it won't find my internet connection even though windows does, i tried using the ethernet cable but it wouldn't pick that up either. So i clicked in Ubuntu... System, network-Browse Internet, then Windows Internet and it said "failed to retrieve share list from server:no such file or directory" how can i get Ubuntu to find my internet???

  Read the article

• How do I run my XBOX XNA game without a network connection?

  - by Hugh

  I need to demo my XBOX XNA game in college. The college doesn't allow this type of device to connect to the network. I deployed my game to the Xbox and it is sitting in the games list along with my other games. It runs fine with a network connection but when its offline it comes up with an error message saying its needs a connection to run the game. This makes no sense, the game is deployed on the Xbox memory, it must be some security policy or something! Is there any way around this? The demo is on monday!

  Read the article

• How to disable the Social Reader Application in Facebook?

  - by Rekha

  Social Reader Application has made the process of sharing in Facebook easy but it looks like whatever we read is being displayed in our Facebook’s page. How to avoid this sharing? In the recent days, everyone’s Facebook Page is being flooded with various news from all the Social Reader Applications we have enabled. Even though this is a good idea to share the current news to everyone, it still seems to have taken away our privacy of what content we actually read. To avoid displaying the news on our Facebook page: 1. If you want the feeds to be displayed in your page but not to be shown to public or friends, just select from the options that are listed when you give permission for the Social Reader when you first read a feed. 2. Select Account Settings from the drop down menu on the top right corner of your FB page. Select Apps Tab which is available in the left side of the page. Here you can change the App Settings or completely delete the App. 3. You can also block Social Reader and other applications’ feeds that are read by your friends. In the right corner of the feed, click the drop-down icon and select “Hide all by ‘Application’” option. By selecting this, you would not be able to see any feeds from your friends too. 4. If you are intrigued by the feeds, you can just copy the title in your search engine and then read directly from their sites. This will not list the feed in your Facebook page.

  Read the article

• What is the correct way to restart udev in Ubuntu?

  - by zerkms

  I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

  Read the article

• Handling packet impersonating in client-server model online game

  - by TheDespite

  I am designing a server-client model game library/engine. How do I, and should I even bother to handle frequent update packet possible impersonating? In my current design anyone could copy a packet from someone else and modify it to execute any non-critical action for another client. I am currently compressing all datagrams so that adds just a tad of security. Edit: One way I thought about was to send a unique "key" to the verified client every x_time and then the client has to add that to all of it's update packets until a new key is sent. Edit2: I should have mentioned that I am not concerned about whether the actions described in the packet are available to the client at the time, this is all checked by the server which I thought was obvious. I am only concerned about someone sending packets for another client.

  Read the article

• Copy all bridge traffic to a specific interface

  - by Azendale

  I have a bridge/switch set up an a machine that has multiple ports. Occasionally, I have a vm running through virtualbox, and I'll have it use a virtual adapter and then I add the adapter to the bridge. I have heard that some switches can copy all the traffic they see to a specific port on the bridge, usually for network monitoring. I would like to be able to run some windows based network tools. I do not want to run Windows on the actual hardware, because it would be lots of work to duplicate my setup in windows, so I was thinking if I can copy all traffic to a port, I can send it to a VM with windows. How can I set this up? I think this might be ebtables area, but I don't know ebtables well enough to know for sure, and it always seems like (from my understanding of ebtables) ebtables does something with the traffic (drop, accept, etc), but never copies it.

  Read the article

• How do I format the output of nmap to display on conky?

  - by WolfLarson

  I want to add to the network section of conky a list of all hosts and ips for my network. However I do not know how to format the output in a way I like. I want Live Hosts However this is on the bottom line of nmap's output) host (ip) host (ip) and on and on... I think there should be a max of 7 on my network. How can I do this? The output of nmap -sP 192.168.1.0/24 looks nothing like what I want though it does have all the parts, just in the wrong order.

  Read the article

• You made it through the Interview, Now What?

  - by Jonathan Kehayias

  This is somewhat of a continuation post to my previous blog post, “Some thoughts on Interviweing…” .  Now that you survived the interview process, what do you do?  This is a common area of discomfort for people interviewing for  any kind of job, not just positions dealing with SQL Server.  In this post I’d like to focus on a topic that I like to refer to as “Post Interview Etiquette” and how it might impact your ability to get hired for a position.  Whether or not to follow-up...(read more)

  Read the article

• Multiplayer mobile games and coping with high latency

  - by liortal

  I'm currently researching regarding a design for an online (realtime) mobile multiplayer game. As such, i'm taking into consideration that latencies (lag) is going to be high (perhaps higher than PC/consoles). I'd like to know if there are ways to overcome this or minimize the issues of high latency? The model i'll be using is peer-to-peer (using Photon cloud to broadcast messages to all other players). How do i deal with a scenario where a message about a local object's state at time t will only get to other players at *t + HUGE_LAG* ?

  Read the article

• compiling compat-wireless fails at 'make' with 'make: *** [modules] Error 2'

  - by Paul Carter

  Trying to compile the compat-wireless-2012-09-25 driver module, without success. scrips/driver-select alx ; works make ; fails - scripts/Makefile.build:44 ~/sourcecode/compat-wireless-2012-09-25.2/drivers/net/ethernet/atheros/alx/Makefile: No such file or directory make[4]: ** No rule to make target '~/sourcecode/compat-wireless-2012-09-25.2/drivers/net/ethernet/atheros/alx/Makefile'. Stop. [snip] make: * [modules] Error 2 Device is Atheros AR8161 wired ethernet in a Dell Vostro 3460. I'd be very grateful for assistance in getting this to compile.

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• Fair dice over network w/o trusted 3rd party

  - by Kay

  Though it should be a pretty basic problem, I did not find a solution for it: How to play dice over a network without a trusted third party? The M players shall roll N dice, one player after another. No player may "cheat", i.e. change the outcome to his advantage, or "look into the future" before the next roll. Is that possible? I guess the solution would be something like public key crypto, where each player turns in an encrypted message. After all messages were collected you exchange the keys to decode the messages. Then the sha1(joined string of all decrypted messages) mod 6 + 1 is used to determine the die. The major problem I have: since the message [c/s]hould be anything, I don't know how to prevent tampering with the private keys. Esp. the last player to turn in his key could easily cheat (I guess). The game should even stay fair, if all players "conspire" against one player.

  Read the article

• No wireless network recognized on a Dell Vostro 3560

  - by Itai

  I just installed Ubuntu 12.04 along with Windows 7 on the same laptop - Dell Vostro 3560. Now, on Windows 7 I can access to different wi-fi networks. However, when I am logging onto the Ubuntu section (after re-starting my laptop) - an error message appears: Disconnected - you are now offline When I take a look at my network menu (in the upper bar on the screen), I see that no network is found (and I have a few of them in the area. ). I tried to look around but really could not find a concrete practical solution to this specific problem, would appreciate any solution from anyone out there that had this problem and solved it.

  Read the article

• Ubuntu systematically losing wired connection

  - by Lukasz Baczynski

  I'm working on 11.10 for few recent days, everything was working perfect until today. Updated ubuntu (some certs were updates as far as i remember) and from this time, wired network stops working randomly and systematically. (All other pcs/macs work fine) From 192.168.0.9 icmp_seq=25 Destination Host Unreachable From 192.168.0.9 icmp_seq=26 Destination Host Unreachable From 192.168.0.9 icmp_seq=27 Destination Host Unreachable From 192.168.0.9 icmp_seq=28 Destination Host Unreachable From 192.168.0.9 icmp_seq=29 Destination Host Unreachable From 192.168.0.9 icmp_seq=30 Destination Host Unreachable From 192.168.0.9 icmp_seq=31 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=32 ttl=64 time=1003 ms 64 bytes from 192.168.0.1: icmp_req=33 ttl=64 time=0.496 ms 64 bytes from 192.168.0.1: icmp_req=34 ttl=64 time=0.576 ms 64 bytes from 192.168.0.1: icmp_req=35 ttl=64 time=0.522 ms 64 bytes from 192.168.0.1: icmp_req=36 ttl=64 time=0.624 ms 64 bytes from 192.168.0.1: icmp_req=37 ttl=64 time=0.625 ms 64 bytes from 192.168.0.1: icmp_req=38 ttl=64 time=0.555 ms It'll work for 20 seconds then it'll stop working for 10-30sec and so on. I've tried setting my router to give static IPs, it doesn't help. NOTHING has been changed since yesterday beside the package update... Here are other settings that may be useful: baka@baka-PC:~/Private/projects/wduk$ lspci -nnk | grep -iA2 net 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Kernel driver in use: r8169 baka@baka-PC:~/Private/projects/wduk$ ifconfig -a eth0 Link encap:Ethernet HWaddr **Removed MAC address** inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:fe0a:85b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6400 errors:0 dropped:6400 overruns:0 frame:6400 TX packets:7085 errors:0 dropped:107 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4191983 (4.1 MB) TX bytes:886881 (886.8 KB) Interrupt:72 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2522 errors:0 dropped:0 overruns:0 frame:0 TX packets:2522 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1070130 (1.0 MB) TX bytes:1070130 (1.0 MB) baka@baka-PC:~/Private/projects/wduk$ cat /etc/resolv.conf # Generated by NetworkManager nameserver 8.8.8.8 thanks for help

  Read the article

• How to prevent WLAN connection from dropping permanently on a Fritz USB WLAN N stick?

  - by Chris

  I have a desktop with a Fritz USB WLAN N stick and tried Ubuntu 12.04. Installation went fine and WLAN is working. However, connection drops permanent. Reconnecting manually fixes it but after a few minutes it drops again. It's connected to a Vodafone 802 box with WLAN N fix set. It seems that it works when I switch off N mode. But I need to test. Can someone confirm this issue or is there another solution? I have another machine with 12.04 (HP 625 laptop) running where connection is stable.

  Read the article

• Network traffic monitoring for unexperienced users

  - by Eduardo Casteluci

  I'm a really unexperienced Ubuntu user and I'm having a hard time monitoring my network traffic. I just need to know what websites each one of the devices connected to my network are accessing. I've tried to use ntop, but I couldn't work around it. Is that possible? I mean, is it possible to know that kind of data only by specifing a local IP address? How can I do that? It's a security issue that I'm facing and I need to work that "easy" monitoring out. Thanks

  Read the article

• How to design network protocols

  - by dandroid

  As a programmer, you work on your software design skills. You learn about things such as modularity and reusability and how you can achieve them in code. There's plenty of literature on the subject and engineers talk about it all the time. What about if you want to design network protocols? How do you judge that protocol X is badly designed while Y is well designed? (eg. in programming you are often pointed out to a well-written piece of code in order to learn from it - what is the equivalent for network protocols?) For example, suppose I want to design a P2P protocol similar to BitTorrent or I want to make a better version of the Socks protocol. How would I go about doing a good job on this? Thanks!

  Read the article

• Is there a maximum delay an UDP packet can have?

  - by Jens Nolte

  I am currently implementing a real-time network protocol for a multiplayer game using UDP. I am not having any technical difficulties, but as I always have to care about late UDP packets I am wondering just how late they can arrive. I have researched the topic and have not found any mention of it, so I assume there is no technical limitation, but I wonder if common network/internet architecture (or hardware) gives an effective limitation of how late a UDP packet can be delivered.

  Read the article

• Akka react vs receive

  - by Will I Am

  I am reading my way through Akka tutorials, but I'd like to get my feet wet with a real-life scenario. I'd like to write both a connectionless UDP server (an echo/ping-pong service) and a TCP server (also an echo service, but it keeps the connection open after it replies). My first question is, is this a good experimental use case for Akka, or am I better served with more common paradigms like IOCP? Would you do something like this with Akka in production? Although I understand conceptually the difference between react() and receive(), I struggle to choose one or the other for the two models. In the UDP model, there is no concept of who the sender is on the server, once the pong is sent, so should I use receive()? In the TCP model, the connection is maintained on the server after the pong, so should I use react()? If someone could give me some guidance, and maybe an opinion on how you'd design these two use cases, it would take me a long way. I have found a number of examples, but they didn't have explanations as to why they chose the paradigms they did.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >