Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 38/443 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • dd clone hard drive: Input/Output Error though "chkdsk" says OK

    - by unknown (google)
    Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

    Read the article

  • Identify SATA hard drive

    - by Rob Nicholson
    Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

    Read the article

  • How to best config my PC. 2 small SDDs and a 1TB conventional drive

    - by Chadworthington
    I just got a new PC. It has 3 drives C Drive: 80GB SDD Drive P Drive: 120GB SDD (for core programs) D Drive: 1TB SDD (for data and other) I have an MSDN subscription and I am the type of person that loves to install tons of software to check it out. I am very worried that installation programs are forcing me to place a large amount of files on the small C drive. I fear that I will quickly run out of space on my C drive while having ample space on my TB drive. What would you do in my shoes? I didn't select this PC or set the config up. I am wishing that the 120 SSD was my C, to give me a little more room to grow. I guess there are no magic solutions here but I am just looking for your general thoughts

    Read the article

  • cdrom drive doesn't work on laptop

    - by bozdoz
    Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

    Read the article

  • Problem with reformatting Sandisk read-only USB drive

    - by dimas
    Hi everyone I have a problem reformatting my USB drive. Its showing this error message whenever I tried to reformat it using gparted: Parted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Format /dev/sdb1 as ntfs 00:00:01 ( ERROR ) calibrate /dev/sdb1 00:00:01 ( SUCCESS ) path: /dev/sdb1 start: 22,768 end: 31,248,383 size: 31,225,616 (14.89 GiB) set partition type on /dev/sdb1 00:00:00 ( ERROR ) libparted messages ( INFO ) Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Can't write to /dev/sdb, because it is opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Reason I wanted to reformat it is because it just suddenly stopped working when I was transferring files from my pc and also it erased every content that was saved in the usb drive. I tried various tutorials on the net regarding this however I can't find a solution on how to make a usb drive change its read-only property to read-write or anything that would enable me to reformat this usb drive. I have also checked this link format read-only USB drive but this one doesn't have a solution. Also am attempting to do this on Ubuntu 12.04.

    Read the article

  • Users suddenly missing write permissions to the root drive c within an active directory domain

    - by Kevin
    I'm managing an active directory single domain environment on some Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 machines. Since a few weeks I got a strange issue. Some users (not all!) report that they cannot any longer save, copy or write files to the root drive c, whether on their clients (vista, win 7) nor via remote desktop connection on a Windows Server 2008 machine. Even running programs that require direct write permissions to the root drive without administrator permissions fail to do so since then. The affected users have local administrator permissions. The question I'm facing now is: What caused this change of system behavior? Why did this happen? I didn't find out yet. What was the last thing I did before it happened? The last action that was made before it happened was the rollout of a GPO containing network drive mappings for the users depending on their security group membership. All network drives are located on a linux server with samba enabled. We did not change any UAC settings, and they have always been activated. However I can't imagine that rolling out this GPO caused the problem. Has anybody faced an issue like that? Just in case: I know that it is for a specific reason that an user without administrative privileges is prevented from writing to the root drive since windows vista and the implementation of UAC. I don't think that those users should be able to write to drive c, but I try to figure out why this is happening and a few weeks ago this was still working. I also know that a user who is a member of the local administrators group does not execute anything with administrator permissions per default unless he or she executes a program with this permissions. What did I do yet? I checked the permissions of the affected programs, the affected clients/server. Didn't find something special. I checked ALL of our GPOs if there exist any restrictions that could prevent the affected users from writing to the root drive. Did not find any settings. I checked the UAC settings of the affected users and compared those to other users that still can write to the root drive. Everything similar. I googled though the internet and tried to find someone who had a similar problem. Did not find one. Has anybody an idea? Thank you very much. Edit: The GPO that was rolled out does the following (Please excuse if the settings are not named exactly like that, I translated the settings into english): **Windows Settings -- Network Drive Mappings -- Drive N: -- General:** Action: Replace **Properties:** Letter: N Location: \\path-to-drive\drivename Re-Establish connection: deactivated Label as: Name_of_the_Share Use first available Option: deactivated **Windows Settings -- Network Drive Mappings -- Drive N: -- Public: Options:** On error don't process any further elements for this extension: no Run as the logged in user: no remove element if it is not applied anymore: no Only apply once: no **Securitygroup:** Attribute -- Value bool -- AND not -- 0 name -- domain\groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 **Securitygroup:** Attribute -- Value bool -- OR not -- 0 name -- domain\another-groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 Edit: The Error-Message of an affected users says the following: Due to an unexpected error you can't copy the file. Error-Code 0x80070522: The client is missing a required permission. The command icacls C: shows the following: NT-AUTORITY\SYSTEM:(OI)(CI)(F) PRE-DEFINED\Administrators:(OI)(CI)(F) computername\username:(OI)(CI)(F) A college just told me that also the primary domain-controller (PDC) changed from Windows Server 2008 to Windows Server 2012. That also may be a reason. Any suggestions?

    Read the article

  • Mount drives at `/drivename` from nautilus

    - by Anwar Shah
    I want to mount my other drives (mostly ntfs and fat) on /drivename by clicking on the drive icon in the nautilus side pane, where "drivename" refers to the label of the drive. By default nautilus (actually the udisks program) mounts drives in /media/ folder with drive name. How can I achieve this?. Note: Please do not suggest doing this by editing /etc/fstab file. I want this feature in nautilus and after clicking the drive should also be seen in the side pane. (should not be hidden). Edit: Seems to be some have misunderstood this. I don't want to mount in / but as /Main, where "Main" is the label of my ntfs partition. To make it clear, suppose I have two partitions named as "Work" and "Main". I want them to mount at /Work and /Main respectively, when clicked on their icon in nautilus

    Read the article

  • How to workaround or diagnose a kernel panic when "safely removing" external hdd?

    - by Shawn
    I'm experiencing an issue when using the "Safely Remove" option to remove my 1TB external HDD from the Unity Launcher. Not every time, but occasionally my screen will go black and display LARGE amounts of text information (which I obviously cannot screen cap). The jist of the info displayed is that unmounting or 'safely removing' the drive causes a kernel panic. Is there a Command Line command to remove mounted drives, or at least one that would show me some sort of error output when the drive is removed? I'm trying to narrow down the cause. I could be imagining this, but it seems to happen most often when I have other programs running when I remove the drive (i.e. Firefox, Transmission). Please note that my external drive is not in use when I attempt to remove it and it is not being used either by Firefox or Transmission at these times. Any help would be appreciated.

    Read the article

  • After upgrading to 12.10 usb drives fail to mount

    - by John Shore
    Following upgrade to 12.10, my usb drives - both pen drives and a usb hard drive - fail to mount with the error message: Unable to mount *name of drive* volume Adding read ACL for uid 1000 to '/media/*my home file name*' failed: Operation not supported This is on a desktop Dell Inspiron 530. I also have a Dell Inspiron Mini 10 netbook which I also upgraded to 12.10 (slightly smaller installation on a flash hard drive). all devices mount automatically without problems on this computer.

    Read the article

  • Disc Drives: An Endangered Species

    - by Jason Fitzpatrick
    More and more computers are shipping sans-disc drive leading many industry watchers to proclaim the optical disc an endangered species on its way out. Do you still use your drive or are you letting the disc go? CNN Tech reports on the trend: Apple’s new iMac, its flagship desktop computer, was released Friday. For the first time, it has no disc drive. This marks a trend that has already begun on some laptops, like Apple’s MacBook Airs, and of course with mobile devices like smartphones and tablets. “Over time, an optical disc will be as much of an historical curiosity as a floppy disk,” said Michael Gartenberg, a tech-industry analyst with research firm Gartner Inc. According to Apple, where sleeker, thinner designs are always en vogue, dumping the disc drive was a no-brainer. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

    Read the article

  • Windows 8 BIOS - Boot Ubuntu from External HDD

    - by F3AR3DLEGEND
    My laptop came pre-loaded with Windows 8 64-bit (only storage device is a 128 GB SSD). Since it is my school laptop/I've heard creating a Linux partition alongside Windows 8 is not very wise I installed Ubuntu onto my external hard drive. I have a 500GB external HDD with the following partitions: Main Partition - NFTS - ~400 GB Extension Partition / - ext2 - ~25gb /home - ext2 - ~30gb swap - ext2 - 10gb /boot - ? - 10gb ? = not sure of partition Using the PenDriveLinux installer, I created a LiveUSB version of Ubuntu 12.04 (LTS) on a 4GB USB drive. Using that, I installed Ubuntu onto the external hard-drive, without any errors (or at least none that I was notified of). Using the BIOS settings, I changed the OS-loading order so that it is in this order: My External USB HDD Windows Boot Loader Some other things Therefore, Ubuntu should load from my hard drive first, but it doesn't. Also, my hard drive is in working condition, and it turns on when BIOS starts (there is a light indicator). When I start my laptop, it goes directly to Windows 8 (I have the fast startup setting disabled as well). So, is there any way for me to set it up so that when my HDD is connected, it will automatically load Ubuntu? Thanks in advance!

    Read the article

  • Why can't 12.04 installer see one of my hard drives

    - by imparatore
    I'm trying to install Ubuntu 12.04 32-bit from a USB pen drive. I have two drives, a WD Caviar Black and a Samsung SPC250. At the "installation type" stage, it only sees my Samsung and the USB pen drive, not the WD. I checked the drive with gparted and everything seems fine. I tried the alternate installer but that doesn't work either I tried changing from IDE to AHCI in the BIOS and back What can I do now?

    Read the article

  • Not detecting HDD after installing Ubuntu 12.04!

    - by Arthur
    After installing Ubuntu 12.04, which I'm using right now and it works great, my extra hard drive was detected the first time I turned on my computer but then it does not show anymore on my Home Folder, when I run the Disk Utility says that has a few errors but when I try to fix it, says that hard drive is busy and cannot do anything else. I've unmounted it and mounted again but nothing happens. Do you know what can be going on? Cause the first time that I was able to see my hard drive it had all the files I have, but I don't know if deleting the partition will format the whole hard drive or just the ubuntu files. THANKS in advance! BY THE WAY, I'm new to Ubuntu... :S

    Read the article

  • Ubuntu made my second HDD disappear from the BIOS!

    - by RWLarsen
    My netbook, an ASUS 1015PX, shipped with two harddrives. After switching to Ubuntu, the second drive isn't recognized by the OS or the BIOS. I've never formatted the second drive, so it's still set up for use by Windows. I guess I don't care about the data on the drive, I'd just like to be able to use it again. It's probably also worth mentioning that I'm very new to any form of Linux, so I'm remarkably new to the Terminal.

    Read the article

  • Ubuntu in USB.. Boot from fixed HDD?

    - by Z9iT
    I am having Ubuntu 12.04 minimal installed on my USB pen-drive; which I use on several systems as portable OS. I was thinking to edit the boot parameters so that before the main Ubuntu OS is loaded, it shows an option to Boot from Hard Drive for 5 seconds, and then boots to Ubuntu. This way i'll be able to have an option to boot to the OS installed on the Hard-Drive, without removing or unplugging my ubuntu USB stick. How do I edit the boot parameters to achieve this?

    Read the article

  • San Disk Cruzer Glide 32 GB and 8Gb can't be copied to.

    - by chrisfs
    I have Ubuntu 12.04 with a kernal of 3.0.0-17-generic (#30-Ubuntu SMP Thu Mar 8 17:34:21 UT When I tried to copy files to a San Disk Cruzer 8gb usb drive, the copy process went a short way and then completely stopped. Although I have copied items to the USB drive from my PC before, this time the files would start quickly enough but always stop shortly after starting. I figure the 8 gb was bad, so I went and got a brand new 32 gb usb drive from a store, unpackaged it and plugged it in, still unable to copy to the usb drive. So is there some kind of incompatibility or issue where San Disk Cruzer Glides are no longer supporting it. Is there an obscure setting that I am missing? Any help would be appreciated

    Read the article

  • SBS 2008 Backup Drive Full - Error Code '2147942512'

    - by HK1
    We are using Windows Backup on SBS 2008 SP2 and backing up to 1TB external hard drives. Recently after switching drives our backup started failing because the backup drive is full and auto-delete isn't automatically deleting older backups/show copies. I'm trying to get more information to help me effectively prevent this problem from reoccurring in the future. How I can tell that the drive is getting full: In the event viewer under Windows Logs Application, I'm seeing Event ID 517 but it fails to show an intelligible description. However, under Applications and Services Logs Microsoft Windows Backup Operational, I'm seeing an event with the ID of 5 and a description like this: Backup started at '10/4/2011 12:30:12 PM' failed with following error code '2147942512'. One of the most informative posts I've found on this error is located on Microsoft's Technet Forums here. In that post, a Microsoft representative gives this hazy explanation: auto-delete feature to ensure that at least some old backup copies are maintained on the disk -- does not automatically delete backups if space utilization by older copies is less than 1/8 of the disk size or in other words, 13% of the disk size. that means if the one full backup copy does not fit in the 7/8 of the disk size, backup may fail with disk full error. auto-delete will not automatically delete older versions to reclaim more older versions of backup. In the above explanation, I do not understand what is meant by "older copies" except that it appears that anything older than the very last shadow copy would be considered "older copies". I'm going to make the assumption that this problem where auto-delete will not work will affect any hard drive that is large enough to make an effective backup drive, or in other words, any hard drive that is large enough to hold more than one backup/shadow copy at once. The same MS representative proposes the solution of using a larger backup drive. I can't understand how this will help. It appears to me it will simply delay the problem until a later date. In order to resolve this problem for now, I did the following: Assign the backup drive a disk letter under disk management. Run the command line with Administrative rights. diskshadow.exe [enter] delete shadows oldest x: [enter] (where X: is the letter you assigned your backup drive) I manually ran the above command some 60 or 80 times to free up about 200 GB of space on my 1 Terrabyte External Hard drive. However, I do not feel this is a satisfactory solution to prevent the problem from happening again in the future. Does anyone have a solution to prevent your Windows Server backup drive from getting full?

    Read the article

  • NAS device claims drive in a RAID is degraded but S.M.A.R.T. says it is fine

    - by Nathan Villaescusa
    I have a Synology DS213 with two 600GB drives in RAID 1. Last night the device reported that my second drive had become degraded and that I should replace it. When I ran a extensive S.M.A.R.T. test the results said that the drive is okay. How can I confirm that the drive is actually bad? Is there any case that the degraded drive is the good one and that it is actually the other drive that is bad?

    Read the article

  • External hard drive that gets its power supply from the PC.

    - by AngryHacker
    I need an external drive to connect to my MacMini. I've been using an 80gb 2.5 drive in an enclosure and it's fine, but now I need a 1.5TB drive. Unfortunately all the 1.5TB drives I found need a separate power supply. I'd like it to be able to feed its power off the USB drive (just like my 80gb drive does). Does something like that exists?

    Read the article

  • All my folders and files on my flash drive have been renamed automatically and I can no longer open them... I need those files

    - by jennifer
    I opened up my flash drive this morning and all of my folders and files are normal, except for one folder and all its included files, which is the most important folder. The subfolders and files are renamed with bizarre characters and when I click to open them, a pop-up appears saying it's not accessible and the filename or directory name is incorrect. I don't want to reformat the flash drive because I'd lose all those files. Is there a way for me to restore it or something? I would attach a screen shot, but apparently new users do not have that privilege. If you have a vague idea of what I'm talking about, let me know and I can email you screenshots so you can have a better understanding. Any help is greatly appreciated!

    Read the article

  • Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

    - by Željko Filipin
    I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

    Read the article

  • What is the best file system and allocation size for a USB flash drive?

    - by e-t172
    I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

    Read the article

  • How can I connect a SAS drive to USB? [closed]

    - by dave
    I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

    Read the article

  • What's the difference between "Flash Drive" and "Flash Memory"?

    - by Clive D
    I have a problem with a Blu ray disk I bought. I talked to a Sony technician who advised me to plug a "USB Flash Memory Stick" into the Blu-ray player. Is this something specific? Is there a difference between the following two? "USB Flash Drive" "USB Flash Memory" When I go to Curry's or other sites that sell USB Sticks, they only talk about "USB Flash Drives". I've been in computing for many years and know the basics, but "memory" and "drive" are different things to me.

    Read the article

  • What's the best external hard drive configuration for a software developer laptop?

    - by Dan
    I've got a Dell laptop that I use as a software developer box at work and find that the drive is usually the bottleneck. I'd like to hook up two 10k RPM drives that are striped for performance. I've looked for drive cases with RAID but there don't seem to be very many choices and I'm worried about compatibility with the drives (preferably SATA 2). Also I don't have a SATA connection on my machine so it'll have to USB 2.0 for now. Am I headed down the right path or am I missing a much simpler configuration?

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >