Search Results

Search found 11618 results on 465 pages for 'shared storage'.

Page 380/465 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• Latitude D600 USB port problem

  - by Moab

  Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

  Read the article

• WD Caviar Green Extremely Slow

  - by Steven

  I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

  Read the article

• Compatibility of Fedora install on a Hybrid drive

  - by kjh

  I recently bought un ultrabook with a 500gb/32gb sdd hdd hybrid drive, and I'm having trouble replacing windows on it with fedora seventeen. it errors out saying there was an unhandled exception. Is linux compatible with hybrid drives? or can the operating system on a hybrid drive not be replaced? Edit: here are the steps I select special storage devices because it ignores my hard drives otherwise at this point i get the message: "Disk contains bios raid meta data, disk sda will be ignored" I can pick a hostname, select my timezone and set a password at the install type screen, no matter what I select (use all free space, replace linux systems, create custom partition etc..) once I click next, it says "an unhandled exception" has occured. and I can no longer proceed with installation. Here is the error message: anaconda 17.29 exception report Traceback (most recent call first); File "/usr/lib64/python2.7/size-packages/pyanaconda/bootloader.py"; line 183 self.stage1_drive=self_drives[0] File "/usr/lib64/python2.7/site-packages/pyanaconda/rw/cleardisks_gui.ph"; line... and tons of more lines like that

  Read the article

• Can nginx be an mail proxy for a backend server that does not accept cleartext logins?

  - by 84104

  Can Nginx be an mail proxy for a backend server that does not accept cleartext logins? Preferably I'd like to know what directive to include so that it will invoke STARTTLS/STLS, but communication via IMAPS or POP3S is sufficient. relevant(?) section of nginx.conf mail { auth_http localhost:80/mailproxy/auth.php; proxy on; ssl_prefer_server_ciphers on; ssl_protocols TLSv1 SSLv3; ssl_ciphers HIGH:!ADH:!MD5:@STRENGTH; ssl_session_cache shared:TLSSL:16m; ssl_session_timeout 10m; ssl_certificate /etc/ssl/private/hostname.crt; ssl_certificate_key /etc/ssl/private/hostname.key; imap_capabilities "IMAP4rev1" "UIDPLUS"; server { protocol imap; listen 143; starttls on; } server { protocol imap; listen 993; ssl on; } pop3_capabilities "TOP" "USER"; server { protocol pop3; listen 110; starttls on; pop3_auth plain; } server { protocol pop3; listen 995; ssl on; pop3_auth plain; } }

  Read the article

• What is the max connections via remote desktop for a small server?

  - by Jay Wen

  I have a small server running MS Server 2012. The CPU is a Xeon E3-1230 V2 @ 3.30GHz, 4 Cores, 8 Logical Processors, 8 GB RAM. Main HD is a Samsung 840, and the big storage is a 4 disk WD Black Raid 10 Array in a Synology NAS enclusure. My question is: given this hardware, approximately how many users can the system support via "Remote Desktop Connection"? Assume there are no licensing limits. These are not admin users. I know there is a two admin limit. This boils down to: What resources does one remote connection require? RAM? % of the CPU? Networking bandwidth? I guess the base case would be for a conection where the user is inactive or simply browsing cnn. Once you know this, you know how many you could fit on the machine before something is maxed-out. In reality, users would be mostly on Excel (multi-MB spreadsheets). I know the approx. resources currently required by each copy of Excel.

  Read the article

• Per-mailbox IMAP settings in Exchange 2003 apply successfully but revert to server default

  - by erictheavg

  The title says most of it. I have a Spiceworks mailbox that connects to our Exchange Server 2003 box via IMAP for receiving help desk issues. But for complicated reasons, I want it to receive those emails in text-only format. So, I discovered that you can just go to: Exchange System Manager Administrative Groups First Administrative Group First Storage Group Mailbox Store Mailboxes Right-click the mailbox, Configure Exchange Features Edit the properties for IMAP Set that mailbox to only receive message bodies as plain text. I click OK, then Next, it reports success, and I assume I'm done. But then when I go right back to where I was, I see that "Use protocol defaults" is still checked. Anyone have a clue why this would be? Some other details: I'm logged in as Administrator when I do this. I can't change this setting for the entire IMAP virtual server because some regular users use it. I only have one IP address to play with, which means I can't create another IMAP virtual server. Any suggestions or ideas are greatly appreciated!

  Read the article

• Does having TRIM enabled affect other hard drives on a computer (and how do you know when Windows is using it)?

  - by Breakthrough

  I recently purchased a solid state drive (an OCZ Vertex 2 (80 GB)) to use as my primary operating system partition. I also have three other SATA hard drives of assorted sizes. I successfully installed Windows 7 Professional onto the SSD (works awesome, great response time and transfer rate), and used the other three HDDs for data storage. I was browsing through the Bible of OCZ SSDs, and noticed the following in Section 60-76 - Tweaks and TRIM: Q. How do I know if TRIM is enabled on my OCZ SSD? A. In Windows 7, go to start/run/cmd), type the following: fsutil.exe behaviour query DisableDeleteNotify It should respond back with: DisableDeleteNotify=0 if TRIM support is ready and active. If it's not, then type: fsutil.exe behavior set DisableDeleteNotify 0 After a bit of searching on Google, I found similar results elsewhere (set DisableDeleteNotify to 0, which makes sense since for TRIM to work, the solid-state drive needs to be notified when deletes occur (for the garbage collector) unlike a normal hard drive). When I run the query on fsutil, I get the following result: DisableDeleteNotify = 48 Following the instructions I found, I set this to 0 instead of 48. However, I am beginning to wonder. Is this all the proof I really need that the OS is using TRIM? Also, since this applies globally for the computer, is TRIM data being sent to the other hard drives connected to the computer? And if so, would this cause any degradation in disk performance?

  Read the article

• Would a PHP application benefit from being served from a RAM drive?

  - by Tom Marthenal

  I am in charge of hosting a PHP application that is large and slow, but easy to scale. The application is entirely static, with writable disk storage needed. We've profiled the application, and the main bottleneck appears to come from loading the application and not the work the application does. The application is not CPU-intensive, although it does use a fair amount of memory (think Magento). Currently we distribute it by having a series of servers with the same PHP files on their hard drive and a load balancer in front of them. Easy but expensive. I've been reading about RAM disks and the IO benefits they offer, and was wondering if they would be well-suited to PHP applications. Since PHP applications are loaded from disk for every request and often involve lots of different files (as opposed to being kept in memory like with a Java application), I would figure that disk performance can be a severe bottleneck. Would placing the PHP files on a RAM disk and using the mount point as Apache's document root offer performance benefits? A startup script could create the RAM drive and then copy the files (which are plain-text and small) from a permanent location to the temporary RAM drive. Does this make sense, or should I just trust the linux kernel to cache the appropriate files in memory by itself?

  Read the article

• MysqlTunner and query_cache_size dilemma

  - by wbad

  On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

  Read the article

• Public Folders - Delete Public Folders from 2003 after migrating to 2010 (via Adsiedit) - safe?

  - by HeavenCore

  Similar Question: How do I delete a public store in Exchange 2003? We are ready to remove our Exchange 2003 server after having migrated all public folders and mailboxes to 2010. We ran for a week with the exchange 2003 server shutdown and everything seemed to work. When I try to delete the PF database from 2003 it says it contains replicas. Whilst migrating i only had one was sync working (from 2003 to 2010) so i believe that 2003 hasn't received the responses from 2010 saying replica removed. When I look in Public folders on the 2003 box none are listed, when i look in PF Instances they are all listed. I know everything has moved to the 2010 server and I know 2010 is not showing the 2003 server as a replica for any folders. I am looking to use ADSI edit to remove the Public folder database from the 2003 server, but want to ensure i am going to delete the right thing so that they do not get deleted from the 2010 database. Should i delete configuration, Services, Microsoft Exchange, Company Name, Administrative groups, First administrative group, Servers, Server name, Information store, First storage group, public folder store (Server name)? Or something else? I have checked and the only public folder with the old exchange server listed as a replica is SYSTEM CONFIGURATION. Thanks in advance.

  Read the article

• How can I rapidly switch hosts?

  - by EAMann

  I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

  Read the article

• Understanding Unix Permissions (w/ ACL)

  - by Dr. DOT

  I am trying to set permissions on my server properly. Currently I have a number of directories and files chmod'd at 0777 -- but I am not comfortable with it being this way. So at the advice of a serverfault specialist, I had my hosting provider install ACL on my shared virtual server. When I FTP to the server as my FTP user account "abc", I can do everything I need to do (and rightfully so) because all my dirs and files are owned by "abc", the group is "abc", and the 1st octet is set to 7 (rwx). That much I get. But here's where it gets dark gray for me. PHP is set to user "nobody". so when someone browses on of my web pages that either ends in .php or has some embedded PHP, I assume the last octet controls the access. Because all my dirs and files are owned by "abc" and assigned to group "abc", if the last octet was a 4 (r--) then the server would let the browser read the file. If it were a 6 (rw-) then the server would let the browser also write to the file or directory, correct? what if the web document does not end in .php or does not have any PHP embedded? What is the user then? how can I use ACL to not set the permission to 6 (rw-) or even 7 (rwx)? [not sure what execute does or means] Just looking for some sort of policy settings to best lock down my dirs and files while allowing my PHP scripts to do uploads and write to files (so my users don't call me to tell me "permission denied". Ok, thanks to anyone out there willing to lend me a hand. It is greatly appreciated.

  Read the article

• apache segmentation error

  - by lush

  I can't start Apache with the following errors: [root@web]# /etc/init.d/httpd start Starting httpd: /bin/bash: line 1: 19232 Segmentation fault /usr/sbin/httpd [root@web]# /usr/sbin/apachectl -k start /usr/sbin/apachectl: line 102: 19919 Segmentation fault $HTTPD $OPTIONS $ARGV I use webmin control panel and I've already tried re-installing Apache from scratch. Can someone advise what else I should try to do? Many thanks. UPDATE: The only line is always written in the error logs which seems not to be very important: [Mon Nov 14 19:00:09 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) UPDATE 2: I've recently had the error below in the logs. Looks like some modules are incompatible, so I've just disabled these extensions: fileinfo and mcrypt in my php.ini. I should be able to start the web server without them. PHP Warning: PHP Startup: fileinfo: Unable to initialize module\nModule compiled with module API=20050922, debug=0, thread-safety=0\nPHP compiled with module API=20060613, debug=0, thread-safety=0\nThese options need to match\n in Unknown on line 0 PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0 UPDATE 3: [root@web]# file /usr/sbin/httpd /usr/sbin/httpd: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, stripped [root@web]# uname -m x86_64

  Read the article

• NFS on top of GFS2 - does it work?

  - by Matthew

  We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

  Read the article

• centos install / partitioning

  - by ServerSideX

  I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

  Read the article

• Map path server with workgroup to other server with domain

  - by bzamfir

  I have the following situation, and I need some help to setup properly I have two VPS (hosted with the same provider, maximumasp). Server A is 2008R2, set with WORKGROUP, and server B is 2012, set with domain, maximumasp.local. On server A I have an old web app, which uses a special folder, c:\MyUploads, to store uploaded files. App is using this using an appSetting. It will be kept running for a while for safety / compatibility reasons. I installed a new version of the application on server B, running under AppPoolIdentity. Both instances of the app (A and B) will connect to the same database, so I need them to share also the access to upload folder c:\MyUploads. How should I setup the app on machine B to access the folder c:\MyUploads ? My idea is to share the folder as \A\MyUploads, and then map it to server B. But the problem is, I don't know to give Read/write to c:\MyUploads on machine A to IIS AppPools\ on machine B I was trying a test, and shared the c:\MyUploads to Everyone, ReadWrite. I was able to access it from machine B using \\MyUploads But when app from machine B tried to access a file, it gave error. Any idea how can I accomplish this? Some advice on best practices for such situation would be great. Thank you

  Read the article

• Is it possible to create a simple frontend indexer for openbittorent torrents?

  - by SimonK

  I run a website which distributes a few files every now and again, live music performances by a rock band. I create a torrent file, set the trackers as openbittorrent, publicbt and other similar open trackers. I upload the torrent file to my forum, my users download it and the files are shared. No problems there. What I would like to do is index those torrents properly on my website though so I can follow seeders/leechers and other stats online. I know the open torrent trackers don't have an index but I am aware of many, many indexing sites that do that exact thing. I don't know how though. So what I'm asking is what do I need to do to do that myself? I simply want to create a page that lists the torrents I and other users on my site create, the seeders/leechers ratio and a link to the torrent file etc. What data do I need to be able to do that? I'm proficient in general web design but I don't know what I would need data wise to pull the required info on the torrents? Thanks

  Read the article

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• Something like Dropbox for local use

  - by Casper

  I am looking for a solution to sync folder pairs between a NAS and multiple local macs. Each of the macs could edit files and the other macs should then get synced automatically. Basically my own local version of Dropbox without using "cloud-storage". I have looked into solutions using rsync. As I understand it rsync is not really capable of doing a bi-directional sync. I also do not want to necessarily invoke the sync process. I would prefer a daemon running in the background - waiting and checking for changes and then syncing them "live". The program should also be flexible enough to recognize that it sometimes (in the case with laptops) can not reach the NAS. It should then just wait for the connection to be back again, without bugging me ever few minutes. I have looked into synk, folderwatch, rsync and a few others, but I haven't really found a solution. Isn't there something like "offline folders" from microsoft for the mac? Thanks PS: just for clarification - I don't want to sync for backup purposes, instead I am wanting to sync so that all macs have a local copy of the most recent changes to files.

  Read the article

• Low-traffic WordPress website on Apache keeps crashing server

  - by OC2PS

  I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• What I should know about memory management?

  - by bua

  first of all: I don't use stackadmin or similar so please don't vote for moving there, I'm reading man top and paper "what every programmer should know about memory ..." I need really simple explanation like for retard ;) Having following top dump: top - 11:21:19 up 37 days, 21:16, 4 users, load average: 0.41, 0.75, 1.09 Tasks: 313 total, 5 running, 308 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.6%sy, 0.9%ni, 96.2%id, 0.1%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 132103848k total, 131916948k used, 186900k free, 54000k buffers Swap: 73400944k total, 73070884k used, 330060k free, 13931192k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3305 tudb 25 10 144m 52m 940 R 6.0 0.0 1306:09 app 3011 tudb 15 0 71528 19m 604 S 3.3 0.0 171:57.83 app 3373 tudb 25 10 209m 93m 940 S 3.0 0.1 1074:53 app 3338 tudb 25 10 144m 47m 940 R 2.7 0.0 780:48.48 app 4227 tudb 25 10 208m 99m 904 S 1.3 0.1 198:56.01 app 8506 tudb 25 10 80.7g 49g 932 S 2.0 39.6 458:31.22 app I'm wondering what is: RES (my expl. physical memory consumption ? see 49GB) VIRT (memory mapped disk to cache? see 80GB) SHR (shared pages?) Swap: (is this cached label - for memory mapped disk into swap cache?) Should sum of RES give MEM: X used? or maybe sum of VIRT?

  Read the article

• Why are all of my ZFS snapshot directories empty?

  - by growse

  I'm running an Oracle 11 box as a ZFS storage appliance, and I'm taking regular snapshots of the ZFS filesystems, via cron. In the past, I know that if I wanted to grab a particular file from a snapshot, a read-only copy was kept in .zfs/snapshot/{name}/ and I could just navigate there and pull the file out. This is documented on Oracle's website. However, I went to do this the other day, and noticed that the ZFS directories within the snapshot directories are all empty. zfs list -t snapshot correctly shows the list of snapshots that should be present, and .zfs/snapshots correctly contains a directory for each snapshot, and in each snapshot there is a directory present for each ZFS filesystem. However, these directories appear to be empty. I just tested a restore by touching a file in a little-used share and rolling back to the latest hourly snapshot, and this appears to have worked fine. So the rollback functionality is there. Did Oracle change how snapshots are done? Or is something seriously wrong here?

  Read the article

• Hyper-V VM's cannot access Host resources, and vice-versa

  - by Agent

  I have several Hyper-V vm's running on this Win2008 R2 Server box, and up until a reboot of the host server, all the VM's were able to access shared folders on the host. Now, they can't even ping the host server. From what I've seen, I need to setup an Internal only network through Virtual Network Manager in Hyper-V. I set this up, then tried to enable the Microsoft Virtual Network Switch Protocol option in this Internal Only NIC, but I get popups saying: Your current selection will also disable the following features: Microsoft virtual network switch protocol Which is absolutely stupid, considering the protocol is what I'm ticking the checkbox to Enable! As of now, on the host, I have 2 NICs: Physical - This NIC on the host machine does have the MVNS protocol enabled Virtual Network Adapter - Created through Hyper-V Virtual Network Manager as an External type of network. Trying to enable MVNS on this NIC also produces the error above. I've tried enabling Client for Microsoft Networks on the physical NIC for IPv6, but everytime I do that, all the VMs lose Internet connectivity and I cannot RDP into them. Anything else I can try?

  Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >