Search Results

Search found 9954 results on 399 pages for 'mean'.

Page 381/399 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• Puppet gives SSL error because master is not running?

  - by Daniel Huger

  I started with two clean machines this time. My master is running 12.04 Version: 2.7.11-1ubuntu2 Depends: ruby1.8, puppetmaster-common (= 2.7.11-1ubuntu2) My client is 10.04 Version: 2.6.3-0ubuntu1~lucid1 Depends: puppet-common (= 2.6.3-0ubuntu1~lucid1), ruby1.8 To setup Puppet tutorial: http://shapeshed.com/setting-up-puppet-on-ubuntu-10-04/ To connect master and client: http://shapeshed.com/connecting-clients-to-a-puppet-master/ The first time I tried to connect master to client failed with SSL_connect error. So I did rm -rf /etc/puppet/ssl/ to remove all the keys inside ssl folders. It looked like it work.... BUT client# puppet agent --server puppet --waitforce 60 --test /usr/lib/ruby/1.8/facter/util/resolution.rb:46: warning: Insecure world writable dir /etc/condor in PATH, mode 040777 /usr/lib/ruby/1.8/puppet/defaults.rb:67: warning: Insecure world writable dir /etc/condor in PATH, mode 040777 info: Creating a new SSL key for giab10 warning: peer certificate won't be verified in this SSL session info: Caching certificate for ca warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session info: Creating a new SSL certificate request for mybox123 info: Certificate Request fingerprint (md5): XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session info: Caching certificate for mybox123 err: Could not retrieve catalog from remote server: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed warning: Not using cache on failed catalog It cached but then it couldn't retrieve it. Let me stop here.... worrying I would mess something up. But let's check master's status. * master is not running WoW.... ??? master# service puppetmaster start * Starting puppet master [OK] master# service puppetmaster status * master is not running I think time is sync. Well, we are behind a firewall so the port to sync time is disbaled. I checked with date and they seem okay. What about master not running? Is that the cause? Any help is appreciated. Thanks! /var/lib/puppet/log/masterhttp.log [2012-06-30 00:13:25] INFO WEBrick 1.3.1 [2012-06-30 00:13:25] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:13:25] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 00:19:40] INFO WEBrick 1.3.1 [2012-06-30 00:19:40] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:19:40] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 00:28:58] INFO WEBrick 1.3.1 [2012-06-30 00:28:58] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:28:58] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 15:31:25] INFO WEBrick 1.3.1 [2012-06-30 15:31:25] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 15:31:25] WARN TCPServer Error: Address already in use - bind(2) 1 S puppet 5186 1 0 80 0 - 29410 poll_s 15:44 ? 00:00:00 /usr/bin/ruby1.8 /usr/bin/puppet master --masterport=8140 4 S root 5235 5005 0 80 0 - 2344 pipe_w 15:45 pts/0 00:00:00 grep --color=auto puppet kill -9 5186 puppet master service puppetmaster status * master is not running I always have this error, but I always ignored it. http://pastebin.com/exbpArjv What could it mean? Time sync? Package not installed? Then how could we do puppetca in the first place?

  Read the article

• Expert iptables help needed?

  - by Asad Moeen

  After a detailed analysis, I collected these details. I am under a UDP Flood which is more of application dependent. I run a Game-Server and an attacker is flooding me with "getstatus" query which makes the GameServer respond by making the replies to the query which cause output to the attacker's IP as high as 30mb/s and server lag. Here are the packet details, Packet starts with 4 bytes 0xff and then getstatus. Theoretically, the packet is like "\xff\xff\xff\xffgetstatus " Now that I've tried a lot of iptables variations like state and rate-limiting along side but those didn't work. Rate Limit works good but only when the Server is not started. As soon as the server starts, no iptables rule seems to block it. Anyone else got more solutions? someone asked me to contact the provider and get it done at the Network/Router but that looks very odd and I believe they might not do it since that would also affect other clients. Responding to all those answers, I'd say: Firstly, its a VPS so they can't do it for me. Secondly, I don't care if something is coming in but since its application generated so there has to be a OS level solution to block the outgoing packets. At least the outgoing ones must be stopped. Secondly, its not Ddos since just 400kb/s input generates 30mb/s output from my GameServer. That never happens in a D-dos. Asking the provider/hardware level solution should be used in that case but this one is different. And Yes, Banning his IP stops the flood of outgoing packets but he has many more IP-Addresses as he spoofs his original so I just need something to block him automatically. Even tried a lot of Firewalls but as you know they are just front-ends to iptables so if something doesn't work on iptables, what would the firewalls do? These were the rules I tried, iptables -A INPUT -p udp -m state --state NEW -m recent --set --name DDOS --rsource iptables -A INPUT -p udp -m state --state NEW -m recent --update --seconds 1 --hitcount 5 --name DDOS --rsource -j DROP It works for the attacks on un-used ports but when the server is listening and responding to the incoming queries by the attacker, it never works. Okay Tom.H, your rules were working when I modified them somehow like this: iptables -A INPUT -p udp -m length --length 1:1024 -m recent --set --name XXXX --rsource iptables -A INPUT -p udp -m string --string "xxxxxxxxxx" --algo bm --to 65535 -m recent --update --seconds 1 --hitcount 15 --name XXXX --rsource -j DROP They worked for about 3 days very good where the string "xxxxxxxxx" would be rate-limited, blocked if someone flooded and also didn't affect the clients. But just today, I tried updating the chain to try to remove a previously blocked IP so for that I had to flush the chain and restore this rule ( iptables -X and iptables -F ), some clients were already connected to servers including me. So restoring the rules now would also block some of the clients string completely while some are not affected. So does this mean I need to restart the server or why else would this happen because the last time the rules were working, there was no one connected?

  Read the article

• Does this prove a network bandwidth bottleneck?

  - by Yuji Tomita

  I've incorrectly assumed that my internal AB testing means my server can handle 1k concurrency @3k hits per second. My theory at at the moment is that the network is the bottleneck. The server can't send enough data fast enough. External testing from blitz.io at 1k concurrency shows my hits/s capping off at 180, with pages taking longer and longer to respond as the server is only able to return 180 per second. I've served a blank file from nginx and benched it: it scales 1:1 with concurrency. Now to rule out IO / memcached bottlenecks (nginx normally pulls from memcached), I serve up a static version of the cached page from the filesystem. The results are very similar to my original test; I'm capped at around 180 RPS. Splitting the HTML page in half gives me double the RPS, so it's definitely limited by the size of the page. If I internally ApacheBench from the local server, I get consistent results of around 4k RPS on both the Full Page and the Half Page, at high transfer rates. Transfer rate: 62586.14 [Kbytes/sec] received If I AB from an external server, I get around 180RPS - same as the blitz.io results. How do I know it's not intentional throttling? If I benchmark from multiple external servers, all results become poor which leads me to believe the problem is in MY servers outbound traffic, not a download speed issue with my benchmarking servers / blitz.io. So I'm back to my conclusion that my server can't send data fast enough. Am I right? Are there other ways to interpret this data? Is the solution/optimization to set up multiple servers + load balancing that can each serve 180 hits per second? I'm quite new to server optimization, so I'd appreciate any confirmation interpreting this data. Outbound traffic Here's more information about the outbound bandwidth: The network graph shows a maximum output of 16 Mb/s: 16 megabits per second. Doesn't sound like much at all. Due to a suggestion about throttling, I looked into this and found that linode has a 50mbps cap (which I'm not even close to hitting, apparently). I had it raised to 100mbps. Since linode caps my traffic, and I'm not even hitting it, does this mean that my server should indeed be capable of outputting up to 100mbps but is limited by some other internal bottleneck? I just don't understand how networks at this large of a scale work; can they literally send data as fast as they can read from the HDD? Is the network pipe that big? In conclusion 1: Based on the above, I'm thinking I can definitely raise my 180RPS by adding an nginx load balancer on top of a multi nginx server setup at exactly 180RPS per server behind the LB. 2: If linode has a 50/100mbit limit that I'm not hitting at all, there must be something I can do to hit that limit with my single server setup. If I can read / transmit data fast enough locally, and linode even bothers to have a 50mbit/100mbit cap, there must be an internal bottleneck that's not allowing me to hit those caps that I'm not sure how to detect. Correct? I realize the question is huge and vague now, but I'm not sure how to condense it. Any input is appreciated on any conclusion I've made.

  Read the article

• overriding new ubuntu installation

  - by tkoomzaaskz

  I've got a ubuntu 11.10 which has lost its support in May 2013, now I'd like to reintall up to the most up-to-date LTS, which is 12.04. My question is regarding my current partitions and doing backups. Is there a safe way to backup my data on some local partitions instead of copying files into DVDs/external drives (this is very uncormortable in my situation). Following are system commands shoing my disk: $ lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 232,9G 0 +-sda1 8:1 0 48,8G 0 +-sda2 8:2 0 63G 0 +-sda3 8:3 0 1K 0 +-sda4 8:4 0 53,7G 0 / +-sda5 8:5 0 18,6G 0 +-sda6 8:6 0 25,5G 0 +-sda7 8:7 0 23,3G 0 [SWAP] sr0 11:0 1 1024M 0 and $ sudo fdisk -l [sudo] password for xyz: Disk /dev/sda: 250.1 GB, 250059350016 bytes glowic: 255, sektorów/sciezke: 63, cylindrów: 30401, w sumie sektorów: 488397168 Jednostka = sektorów, czyli 1 * 512 = 512 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0xc3ffc3ff Device Boot Beginning End Blocks ID System /dev/sda1 * 2048 102402047 51200000 7 HPFS/NTFS/exFAT /dev/sda2 215044096 347080703 66018304 7 HPFS/NTFS/exFAT /dev/sda3 347082750 488392064 70654657+ 5 Extended /dev/sda4 102402048 215042047 56320000 83 Linux /dev/sda5 395905923 434975939 19535008+ 83 Linux /dev/sda6 434976003 488392064 26708031 83 Linux /dev/sda7 347082752 395905023 24411136 82 Linux swap / Solaris In the beginning I had Windows Vista pre-installed with the machine when it was bought (damn!) and I installed linux (the one I have now). The windows-program in master boot record has been overriden by grub and now I can boot with both Windows and Linux. This is list of mounted devices: $ mount /dev/sda4 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/tomasz/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tomasz) It's strange (I don't remember such thing) that my current linux uses only one partition (/dev/sda4). But, anyway, it seems like that. My final question is: am I able to use one of the existing linux partitions for a backup and install ubuntu 12.04 without removing neither windows nor ubuntu 11.04? I mean - will grub automatically accept both old windows vista and 2 linuxes (old 11.10 and "new" 12.04)? Is there any hidden operation done while installation that could harm my custom-backup-partition while installing? my fstab file: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=d44e89f5-9da2-48eb-83b3-887652ec95d2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=bbe50535-ba57-434a-9272-211d859f0e00 none swap sw 0 0 sda5 and sda6 are trash partitions created during unsuccessful linux installation (this was linux installation before my current installation), I didn't delete these partitions, but I have access to them (and I can use them as backup partitions). edit: second question is: why does lsblk show /dev/sda having 232,9G while fdisk shows that it has 250.1GB? Where does the difference come from?

  Read the article

• moving raid 10 to another identical server both on Smart Array 6i controllers

  - by SalimQrdl

  I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led 2,3,8 lighting. I want to move array to another identical server with same raid firmware level. What is the best strategy?: I have RAID 1+0 on bay 0 bay 1 bay 2 bay 3 As I understand bay0+bay1 are in RAID 1 , bay2+bay3 are in RAID 1, and both RAID 1 pairs are in RAID 0. So should I : Clear RAID config on new server, insert bay 0, bay 2 and power-on or Create RAID 1+0 with 1 logical volume from clear HDDs , and then poweroff ,remove HDDs and insert 2 HDDs(bay 0, bay 2) from old RAID 1+0. then power-on. (each hdd has its raid position info stored but may be could work on same config) According to documentation for Smart Array 6i it could be possible to migrate. however one requirement point is unclear for me Before you move drives, the following conditions must be met: • The array is in its original configuration. " What is orginal and non-original config for RAID 1+0? Another point "If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time." I want to move one hdd from each RAID 1 pair. to have mirrors untouched just in case. Do they mean to move all 4 simultaniously? Smart Array 6i User Guide: Moving Drives and Arrays You can move drives to other ID positionson the same array controller. You can also move a complete arrayfrom one controller to another, even if the controllers are on different servers. Before you move drives, the following conditions must be met: • If moving thedrives to a different server, the new server must have enough empty bays to accommodate all the drives simultaneously. • The move will not result in more than 14 physical drives per controller channel. • No controller will be configured with more than 32 logical volumes. • The array has no failed or missing drives. • The array is in its original configuration. • The controller is not reading from or writing to any of the spare drives in the array. • The controller is not running capacity expansion, capacity extension, or RAID or stripe size migration. • The controller is using the latestfirmware version (recommended). If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time. • In most cases, a moved array (and the logical drives that it contains) can still undergo arraycapacity expansion, logical drive capacity extension, or migration of RAID level orstripe size. When all the conditions have been met: Back up all data before removing any drives or changing configuration. This step is requiredif you are moving data-containing drives from a controller that does not have a battery-backed cache. Power down the system. If you are moving an array from a controller that contains a RAID ADG logical volume to a controller that does not support RAID ADG: Move the drives. Power up the system. If a 1724 POST message is displayed, drive positions were changed successfully and the configuration was updated. If a 1785 (NotConfigured)POST message is displayed: a. Power down the system immediately to prevent data loss. b. Return the drives to their original locations. c. Restore the data from backup, if necessary. Check the new drive configuration byrunning ORCA or ACU ("Configuring an Array" on page 9).

  Read the article

• htaccess on remote server issues - password prompt not accepting input

  - by pying saucepan

  EDIT: I will contact the university about my problem after labor day weekend, but I thought if someone knew a quick fix that I haven't tried, or if the problem has an obvious fix then I could hope to try my luck here, thanks! TLDR: Sorry its a long post, I thought I should be... thorough. I am having a common issue (found a dead thread through google with no solution to the same problem) with the prompt to enter in a username and password via htaccess rights, but this prompt will keep popping up asking for a username and password when trying to access my home directory on my university's server which has the .htaccess and .htpasswd files. It does not matter if I enter in correct or incorrect credentials, the prompt will keep asking me for input without displaying my home directory. Ever since I have included these ht files I have never once been able to get past the username/password no matter what I have tried, save for removing them from the directory I am trying to access (my top level directory that I own). This kind of served my original goal of making the top level directory inaccessible to casual users, but if I wanted to use this method on other places, I would want it to work as intended. And I also like it when computers do what I wish they would, so any help is appreciated. Some things I have tried: Changing the file/directory access rights: they told me to try these commands if people can't access my files cd ~/public_html find ./ -type d -exec chmod 755 {} \; find ./ -type f -exec chmod 644 {} \; enter in the single character name/pw at least twenty times in a row, no cheddar. so I changed directory with cd ~ in hopes that this would be my home directory, since my home directory contains the "public_html" directory, so logic tells me that the ~ tilde symbol is the top level directory that I have ownership of. Then I did those two commands to change the rights on the files inside, I am still having no luck. How I got to this point: I have been following the instructions given to me through my university's website for setting up my little directory. A link on how they describe how to password protect the home directory is given below: "Protect Web Directories" instructions I have everything in order except for one small detail that I feel probably does not matter. I am on windows and so I am using winSCP to remote control my allocated server space. The small detail is that as the instructions indicate (on step 3) that I should use the command htpasswd -c .htpasswd {username} where {username} is my folder that holds my allocated server space. But this command requires further input through the terminal, and unfortunately winSCP does not offer this kind of functionality. So I looked up some basic instructions on using htaccess and it is formatted correctly such that the .htaccess file appears as follows: AuthType Basic AuthName "Verify" AuthUserFile /correctpath/.htpasswd require valid-user and this file is in the root directory for my server space as well as the .htpasswd file which has only this data inside: username:password I know for sure that these two files must be formatted correctly, at least according to their tutorial, because before my path was incorrectly formatted via including some curly { braces } without knowing the correct way to do this at first. And the password prompt that shows up when accessing my directory responded by loading an error page indicating to contact OSU admin or something not important. But now that I have everything like it 'should' be. I know this because when I enter in my credentials "username and password" the prompt pops up for my username and password again and again whether or not I enter in correct information. The only exception is that if I click cancel it will direct me to a page saying that I need to enter in a username and password. Note that I am very inexperienced at server-related buisness, two days ago I couldn't have told you what a website actually consists of. So, if you use some technical jargon I may or may not need to look it up and get back to you before I actually understand what you mean, but I am a quick learner and it probably wont matter.

  Read the article

• Issues configuring Exchange 2010 as well as SSL problems.

  - by Eric Smith

  Possibly-Relevant Background Info: I've recently moved up from icky shared hosting to a glorious, Remote Desktop-administrated VPS server running Windows Server 2008 R2. Even though I'm only 21 now and a computer science major, I've tried to play with every Windows Server release since '03, just to learn new things. What usually happens is inevitably I'll do something wrong and pretty much ruin the install. You're dealing with an amateur here :) Through the past few months of working with my new server, I've mastered DNS, IIS, got Team Foundation Server running (yay!), and can install all of the other basics like SQL Server and Active Directory. The Problem: Now, these last few weeks I've been trying to install Exchange Server 2010 (SP1). To make a long story short, it took me several attempts, and I even had to get my server wiped just so I could start fresh since Exchange decided uninstalling properly was for sissies (cost me $20, bah). Today, at long last, I got Exchange mostly working. There were two main problems left, however, that left me unsatisfied: Exchange installed itself and all of its child sites into Default Web Site. I wanted to access Exchange via mail.domain.com, but instead everything was configured to domain.com. My limited server admin knowledge was not enough to configure IIS or Exchange to move itself over to the website I had set up for it, appropriately titled 'mail.domain.com', which I had bound to a dedicated IP address (I was told this was necessary, but he may have been wrong). I have two SSL certificates: one for my main domain and one for my mail subdomain. For whatever reason, I had issues geting Exchange to use my mail certificate, even though I had assigned the proper roles in the MMC. I did, at one point, get it to work (or mostly work, anyways. Frankly, my memory of today is clouded by intense frustration). Additionally, I was confused which type of SSL certificate I should be using for Exchange. My SSL provider, GoDaddy, allows me to request a new certificate whenever, so I can use either the certificate request provided by IIS or the more complicated and specific request you can create with Exchange. Which type should I be using, the IIS or Exchange certificate? If I must use the Exchange certificate, will that 1) cause issues when I bind that certificate to my mail.domain.com subdomain or 2) is that an unnecessary step? The SSL Certificate Strikes Back When I thought I had the proper SSL certificate assigned for those brief, sweet moments, Google Chrome reported the correct mail.domain.com certificate when browsing https://mail.domain.com. However, Outlook 2010 threw up an error when trying to configure my email account claiming that the certificate didn't match the domain of "mail.domain.com". Is this an issue that will be resolved by problem #2 or is it a separate one entirely? Apologies for the massive wall of text, but I wanted to provide as much info as I possibly could. Exchange is the last thing I'd like installed on my server, and naturally it's turning out to be the hardest. Thanks for any info at all. Even a point in a vague direction would be a huge help at this point. Thanks! -Eric P.S.: The reason I keep ruining my install is that when I attempt to uninstall Exchange, something invariably goes wrong. The last time the uninstaller complained that there was still a mailbox active and it couldn't proceed until I deleted it. ... The only mailbox left was the Administrator account, the built-in one I couldn't delete. So I attempted to manually uninstall it following several guides online only to now be stuck unable to launch the installer and have to get my system wiped AGAIN for the second time today ($40 down the drain, bah!). I do not understand at all why "uninstall" just can't mean "hey, you, delete everything and go away". There's not even a force uninstall option, only a "recover system" option that just fails to fix anything and makes it so I can't even use the GUI uninstaller. </rant>

  Read the article

• bash: per-command history. How does it work?

  - by romainl

  OK. I have an old G5 running Leopard and a Dell running Ubuntu 10.04 at home and a MacPro also running Leopard at work. I use Terminal.app/bash a lot. On my home G5 it exhibits a nice feature: using ? to navigate history I get the last command starting with the few letters that I've typed. This is what I mean (| represents the caret): $ ssh user@server $ vim /some/file/just/to/populate/history $ ss| So, I've typed the two first letters of "ssh", hitting ? results in this: $ ssh user@server instead of this, which is the behaviour I get everywhere else : $ vim /some/file/just/to/populate/history If I keep on hitting ? or ?, I can navigate through the history of ssh like this: $ ssh otheruser@otherserver $ ssh user@server $ ssh yetanotheruser@yetanotherserver It works the same for any command like cat, vim or whatever. That's really cool. Except that I have no idea how to mimic this behaviour on my other machines. Here is my .profile: export PATH=/Developer/SDKs/flex_sdk_3.4/bin:/opt/local/bin:/opt/local/sbin:/usr/local/bin:/sw/bin:/sw/sbin:/bin:/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$HOME/Applications/bin:/usr/X11R6/bin export MANPATH=/usr/local/share/man:/usr/local/man:opt/local/man:sw/share/man export INFO=/usr/local/share/info export PERL5LIB=/opt/local/lib/perl5 export PYTHONPATH=/opt/local/bin/python2.7 export EDITOR=/opt/local/bin/vim export VISUAL=/opt/local/bin/vim export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home export TERM=xterm-color export GREP_OPTIONS='--color=auto' GREP_COLOR='1;32' export CLICOLOR=1 export LS_COLORS='no=00:fi=00:di=01;34:ln=target:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.deb=00;31:*.rpm=00;31:*.TAR=00;31:*.TGZ=00;31:*.ARJ=00;31:*.TAZ=00;31:*.LZH=00;31:*.ZIP=00;31:*.Z=00;31:*.Z=00;31:*.GZ=00;31:*.BZ2=00;31:*.DEB=00;31:*.RPM=00;31:*.jpg=00;35:*.png=00;35:*.gif=00;35:*.bmp=00;35:*.ppm=00;35:*.tga=00;35:*.xbm=00;35:*.xpm=00;35:*.tif=00;35:*.png=00;35:*.fli=00;35:*.gl=00;35:*.dl=00;35:*.psd=00;35:*.JPG=00;35:*.PNG=00;35:*.GIF=00;35:*.BMP=00;35:*.PPM=00;35:*.TGA=00;35:*.XBM=00;35:*.XPM=00;35:*.TIF=00;35:*.PNG=00;35:*.FLI=00;35:*.GL=00;35:*.DL=00;35:*.PSD=00;35:*.mpg=00;36:*.avi=00;36:*.mov=00;36:*.flv=00;36:*.divx=00;36:*.qt=00;36:*.mp4=00;36:*.m4v=00;36:*.MPG=00;36:*.AVI=00;36:*.MOV=00;36:*.FLV=00;36:*.DIVX=00;36:*.QT=00;36:*.MP4=00;36:*.M4V=00;36:*.txt=00;32:*.rtf=00;32:*.doc=00;32:*.odf=00;32:*.rtfd=00;32:*.html=00;32:*.css=00;32:*.js=00;32:*.php=00;32:*.xhtml=00;32:*.TXT=00;32:*.RTF=00;32:*.DOC=00;32:*.ODF=00;32:*.RTFD=00;32:*.HTML=00;32:*.CSS=00;32:*.JS=00;32:*.PHP=00;32:*.XHTML=00;32:' export LC_ALL=C export LANG=C stty cs8 -istrip -parenb bind 'set convert-meta off' bind 'set meta-flag on' bind 'set output-meta on' alias ip='curl http://www.whatismyip.org | pbcopy' alias ls='ls -FhLlGp' alias la='ls -AFhLlGp' alias couleurs='$HOME/Applications/bin/colors2.sh' alias td='$HOME/Applications/bin/todo.sh' alias scale='$HOME/Applications/bin/scale.sh' alias stree='$HOME/Applications/bin/tree' alias envoi='$HOME/Applications/bin/envoi.sh' alias unfoo='$HOME/Applications/bin/unfoo' alias up='cd ..' alias size='du -sh' alias lsvn='svn list -vR' alias jsc='/System/Library/Frameworks/JavaScriptCore.framework/Versions/A/Resources/jsc' alias asl='sudo rm -f /private/var/log/asl/*.asl' alias trace='tail -f $HOME/Library/Preferences/Macromedia/Flash\ Player/Logs/flashlog.txt' alias redis='redis-server /opt/local/etc/redis.conf' source /Users/johncoltrane/Applications/bin/git-completion.sh export GIT_PS1_SHOWUNTRACKEDFILES=1 export GIT_PS1_SHOWUPSTREAM="verbose git" export GIT_PS1_SHOWDIRTYSTATE=1 export PS1='\n\[\033[32m\]\w\[\033[0m\] $(__git_ps1 "[%s]")\n\[\033[1;31m\]\[\033[31m\]\u\[\033[0m\] $ \[\033[0m\]' mkcd () { mkdir -p "$*" cd "$*" } function cdl { cd $1 la } n() { $EDITOR ~/Dropbox/nv/"$*".txt } nls () { ls -c ~/Dropbox/nv/ | grep "$*" } copy(){ curl -s -F 'sprunge=<-' http://sprunge.us | pbcopy } if [ -f /opt/local/etc/profile.d/cdargs-bash.sh ]; then source /opt/local/etc/profile.d/cdargs-bash.sh fi if [ -f /opt/local/etc/bash_completion ]; then . /opt/local/etc/bash_completion fi Any idea?

  Read the article

• RHCS: GFS2 in A/A cluster with common storage. Configuring GFS with rgmanager

  - by Pavel A

  I'm configuring a two node A/A cluster with a common storage attached via iSCSI, which uses GFS2 on top of clustered LVM. So far I have prepared a simple configuration, but am not sure which is the right way to configure gfs resource. Here is the rm section of /etc/cluster/cluster.conf: <rm> <failoverdomains> <failoverdomain name="node1" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n1"/> </failoverdomain> <failoverdomain name="node2" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n2"/> </failoverdomain> </failoverdomains> <resources> <script file="/etc/init.d/clvm" name="clvmd"/> <clusterfs name="gfs" fstype="gfs2" mountpoint="/mnt/gfs" device="/dev/vg-cs/lv-gfs"/> </resources> <service name="shared-storage-inst1" autostart="0" domain="node1" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> <service name="shared-storage-inst2" autostart="0" domain="node2" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> </rm> This is what I mean: when using clusterfs resource agent to handle GFS partition, it is not unmounted by default (unless force_unmount option is given). This way when I issue clusvcadm -s shared-storage-inst1 clvm is stopped, but GFS is not unmounted, so a node cannot alter LVM structure on shared storage anymore, but can still access data. And even though a node can do it quite safely (dlm is still running), this seems to be rather inappropriate to me, since clustat reports that the service on a particular node is stopped. Moreover if I later try to stop cman on that node, it will find a dlm locking, produced by GFS, and fail to stop. I could have simply added force_unmount="1", but I would like to know what is the reason behind the default behavior. Why is it not unmounted? Most of the examples out there silently use force_unmount="0", some don't, but none of them give any clue on how the decision was made. Apart from that I have found sample configurations, where people manage GFS partitions with gfs2 init script - https://alteeve.ca/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Defining_The_Resources or even as simply as just enabling services such as clvm and gfs2 to start automatically at boot (http://pbraun.nethence.com/doc/filesystems/gfs2.html), like: chkconfig gfs2 on If I understand the latest approach correctly, such cluster only controls whether nodes are still alive and can fence errant ones, but such cluster has no control over the status of its resources. I have some experience with Pacemaker and I'm used to that all resources are controlled by a cluster and an action can be taken when not only there are connectivity issues, but any of the resources misbehave. So, which is the right way for me to go: leave GFS partition mounted (any reasons to do so?) set force_unmount="1". Won't this break anything? Why this is not the default? use script resource <script file="/etc/init.d/gfs2" name="gfs"/> to manage GFS partition. start it at boot and don't include in cluster.conf (any reasons to do so?) This may be a sort of question that cannot be answered unambiguously, so it would be also of much value for me if you shared your experience or expressed your thoughts on the issue. How does for example /etc/cluster/cluster.conf look like when configuring gfs with Conga or ccs (they are not available to me since for now I have to use Ubuntu for the cluster)? Thanks you very much!

  Read the article

• LDAP object class violation: attribute ou not allowed in suffix?

  - by Paramaeleon

  I am about to set up a LDAP directory. It is used as a tool to communicate user permissions from a web application to WebDav file system access, e.g. adding a user to the web platform shall allow login to the file system with the same credentials. There are no other usages intended. Following this German tutorial which encourages the use of the attributes c, o, ou etc. over dc, I configured the following suffix and root: suffix "ou=webtool,o=myOrg,c=de" rootdn "cn=ldapadmin,ou=webtool,o=myOrg,c=de" Server starts and I can connect to it by LDAP Admin, which reports “LDAP error: Object lacks”. Well, there aren’t any objects yet. I now want to create the root and admin elements from shell. I created an init.ldif file: dn: ou=webtool,o=myOrg,c=de objectclass: dcObject objectclass: organization dc: webtool o: webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Trying to load the file runs into an error, telling me that ou is not allowed: server:~ # ldapadd -x -D "cn=ldapadmin,ou=webtool,o=myOrg,c=de" -W -f init.ldif Enter LDAP Password: adding new entry "ou=webtool,o=myOrg,c=de" ldap_add: Object class violation (65) additional info: attribute 'ou' not allowed I am not using ou anywhere except in the suffix, so the question: Isn’t it allowed here? What is allowed here? Here is my answer. I am not allowed to post it as answer for 8 hours, so don’t mind that it is part of the question by now. I will move it outside some day, if I don’t forget to do so. There are numberous dependencies for the creation of elements, and error messages are rather confusing if you don’t know of the concept. The objectclass isn’t necessarily dcObject for the databases’ root node, as it is likely to guess when you read several tutoriales. Instead, it must correspond to the object’s type: Here, for a name starting with ou=, it must be organizationalUnit. I found this piece of information in these tables [Link removed due to restriction: Oops! Your edit couldn't be submitted because: We're sorry, but as a spam prevention mechanism, new users can only post a maximum of two hyperlinks. Earn more than 10 reputation to post more hyperlinks. Link is below]. Further on, the object class dictates which properties must and can be added in the record. Here, organizationalUnit must have an ou: entry and must not have neither dc: nor o: entry. The healthy init.ldif file looks like that: dn: ou=webtool,o=myOrg,c=de objectclass: organizationalUnit ou: LDAP server for my webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Note: The page also states: “While many objectClasses show no MUST attributes you must (ouch) follow any hierarchy […] to determine if this is the really case.” I thought that would mean my root record would have to provide the must fields for c= and o= (c: and o:, respectively) but this isn’t the case. Link in answer is (1): http :// www (dot) zytrax (dot) com/books/ldap/ape/ "Appendix E: LDAP - Object Classes and Attributes"

  Read the article

• How Hacker Can Access VPS CentOS 6 content?

  - by user2118559

  Just want to understand. Please, correct mistakes and write advices Hacker can access to VPS: 1. Through (using) console terminal, for example, using PuTTY. To access, hacker need to know port number, username and password. Port number hacker can know scanning open ports and try to login. The only way to login as I understand need to know username and password. To block (make more difficult) port scanning, need to use iptables configure /etc/sysconfig/iptables. I followed this https://www.digitalocean.com/community/articles/how-to-setup-a-basic-ip-tables-configuration-on-centos-6 tutorial and got *nat :PREROUTING ACCEPT [87:4524] :POSTROUTING ACCEPT [77:4713] :OUTPUT ACCEPT [77:4713] COMMIT *mangle :PREROUTING ACCEPT [2358:200388] :INPUT ACCEPT [2358:200388] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2638:477779] :POSTROUTING ACCEPT [2638:477779] COMMIT *filter :INPUT DROP [1:40] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [339:56132] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,PSH,ACK,URG -j DROP -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 110 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -s 11.111.11.111/32 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -s 11.111.11.111/32 -p tcp -m tcp --dport 21 -j ACCEPT COMMIT Regarding ports that need to be opened. If does not use ssl, then seems must leave open port 80 for website. Then for ssh (default 22) and for ftp (default 21). And set ip address, from which can connect. So if hacker uses other ip address, he can not access even knowing username and password? Regarding emails not sure. If I send email, using Gmail (Send mail as: (Use Gmail to send from your other email addresses)), then port 25 not necessary. For incoming emails at dynadot.com I use Email Forwarding. Does it mean that emails “does not arrive to VPS” (before arriving to VPS, emails are forwarded, for example to Gmail)? If emails does not arrive to VPS, then seems port 110 also not necessary. If use only ssl, must open port 443 and close port 80. Do not understand regarding port 3306 In PuTTY with /bin/netstat -lnp see Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 992/mysqld As understand it is for mysql. But does not remember that I have opened such port (may be when installed mysql, the port is opened automatically?). Mysql is installed on the same server, where all other content. Need to understand regarding port 3306 2. Also hacker may be able access console terminal through VPS hosting provider Control Panel (serial console emergency access). As understand only using console terminal (PuTTY, etc.) can make “global” changes (changes that can not modify with ftp). 3. Hacker can access to my VPS exploiting some hole in my php code and uploading, for example, Trojan. Unfortunately, faced situation that VPS was hacked. As understand it was because I used ZPanel. On VPS ( \etc\zpanel\panel\bin) ) found one php file, that was identified as Trojan by some virus scanners (at virustotal.com). Experimented with the file on local computer (wamp). And appears that hacker can see all content of VPS, rename, delete, upload etc. From my opinion, if in PuTTY use command like chattr +i /etc/php.ini then hacker could not be able to modify php.ini. Is there any other way to get into VPS?

  Read the article

• Rsyslog is not working properly, it does not log anything

  - by Victor Henriquez

  I'm running a Debian server and a couple of days ago my rsyslog started to behave very weird, the daemon is running but it doesn't seem to do anything. Many people use the system but I'm the only one with (legal) root access. I'm using the default rsyslogd configuration (if you think is relevant I'll attach it, but it's the one that comes with the package). After I rotated all the log files, they have remained empty: # ls -l /var/log/*.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/alternatives.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/auth.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/daemon.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/dpkg.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/kern.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/lpr.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/mail.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/user.log Any try to force a log writing does not have any effect: # logger hey # ls -l /var/log/messages -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/messages Lsof shows that rsyslogd does not have any log files opened: # lsof -p 1855 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 1855 root cwd DIR 202,0 4096 2 / rsyslogd 1855 root rtd DIR 202,0 4096 2 / rsyslogd 1855 root txt REG 202,0 342076 21649 /usr/sbin/rsyslogd rsyslogd 1855 root mem REG 202,0 38556 32153 /lib/i386-linux-gnu/i686/cmov/libnss_nis-2.13.so rsyslogd 1855 root mem REG 202,0 79728 32165 /lib/i386-linux-gnu/i686/cmov/libnsl-2.13.so rsyslogd 1855 root mem REG 202,0 26456 32163 /lib/i386-linux-gnu/i686/cmov/libnss_compat-2.13.so rsyslogd 1855 root mem REG 202,0 297500 1061058 /usr/lib/rsyslog/imuxsock.so rsyslogd 1855 root mem REG 202,0 42628 32170 /lib/i386-linux-gnu/i686/cmov/libnss_files-2.13.so rsyslogd 1855 root mem REG 202,0 22784 1061106 /usr/lib/rsyslog/imklog.so rsyslogd 1855 root mem REG 202,0 1401000 32169 /lib/i386-linux-gnu/i686/cmov/libc-2.13.so rsyslogd 1855 root mem REG 202,0 30684 32175 /lib/i386-linux-gnu/i686/cmov/librt-2.13.so rsyslogd 1855 root mem REG 202,0 9844 32157 /lib/i386-linux-gnu/i686/cmov/libdl-2.13.so rsyslogd 1855 root mem REG 202,0 117009 32154 /lib/i386-linux-gnu/i686/cmov/libpthread-2.13.so rsyslogd 1855 root mem REG 202,0 79980 17746 /usr/lib/libz.so.1.2.3.4 rsyslogd 1855 root mem REG 202,0 18836 1061094 /usr/lib/rsyslog/lmnet.so rsyslogd 1855 root mem REG 202,0 117960 31845 /lib/i386-linux-gnu/ld-2.13.so rsyslogd 1855 root 0u unix 0xebe8e800 0t0 640 /dev/log rsyslogd 1855 root 3u FIFO 0,5 0t0 2474 /dev/xconsole rsyslogd 1855 root 4u unix 0xebe8e400 0t0 645 /var/spool/postfix/dev/log rsyslogd 1855 root 5r REG 0,3 0 4026532176 /proc/kmsg I was so frustrated that even reinstall the rsyslog package, but it still refuses to log anything: # apt-get remove --purge rsyslog # apt-get install rsyslog I thought someone had hacked the system, so run rkhunter, chkrootkit, unhide in an attempt to find hide processes / ports and nmap in a remote host to compare with the ports shown by netstat. And I know this doesn't mean anything, but all looks ok. The system also have an iptables firewall that is very restrictive with incoming / outgoing connections. This is driving me crazy, any idea what is going on here? [EDIT - disk space info] # df -h Filesystem Size Used Avail Use% Mounted on rootfs 24G 22G 629M 98% / /dev/root 24G 22G 629M 98% / devtmpfs 10M 112K 9.9M 2% /dev tmpfs 76M 48K 76M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 151M 40K 151M 1% /tmp tmpfs 151M 0 151M 0% /run/shm

  Read the article

• Intermittent lockups, unable to diagnose in over a year

  - by Magsol

  Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

  Read the article

• Wordpress Permissions OS X & MAMP

  - by Matt2020

  I have installed several local versions of Wordpress for development purposes. After the install I can create posts, pages and edit admin options. However as soon as try to upload images which would be saved in wp_content/uploads I get an error: Upload Error: Unable to create directory ...../blog/wp-content/uploads/2011/05. Is its parent directory writable by the server? Looks like MAMP server runs as user _www The blog directory is owned by User1 and the group User1 _www is not in the User1 group, should it be? I do not want to chmod 777 or 765 on the directories just to get it going. Googled up a couple of references: http://codex.wordpress.org/Changing_File_Permissions in "Permission Scheme for WordPress" All files should be owned by your user (ftp) account on your web server, and should be writable by that account. On shared hosts, files should never be owned by the webserver process itself (sometimes this is www, or apache, or nobody user). Any file that needs write access from WordPress should be owned or group-owned by the user account used by the WordPress (which may be different than the server account). For example, you may have a user account that lets you FTP files back and forth to your server, but your server itself may run using a separate user, in a separate usergroup, such as dhapache or nobody. If WordPress is running as the FTP account, that account needs to have write access, i.e., be the owner of the files, or belong to a group that has write access. In the latter case, that would mean permissions are set more permissively than default (for example, 775 rather than 755 for folders, and 664 instead of 644). User and group are User1 (which is admin). Running "ps aux | grep httpd" is running as _www So I think this means Wordpress is running as user _www. So the advice seems contradictory: "files should never be owned by the webserver process" i.e. _www but then later it says "Any file that needs write access from WordPress should be owned or group-owned by the user account used by the WordPress" So isn't this _www again? Another search found this url http://dancingengineer.com/computing/2009/07/how-to-install-wordpress-on-mac-os-x-leopard States Which says: My preferred way to do this is to change the group of the wordpress directory and its contents to _www and give write permissions to the group. Keep the owner as your "username". $ cd /Users/"username"/Sites $ sudo chown -R username:_www wordpress_directory $ sudo chmod -R g+w wordpress_directory However, when I tried this, it did not work for automatic upgrades to newer versions of WordPress although it worked for automatically updating the .htaccess file for pretty permalinks. It is not entirely clear to me what should be done. This last suggestion seems to be saying change the group from User1 to _www and give the group write access, but Wordpress upgrades won't work. Is this the right solution? I would have thought there would be a clear way to set this up on OS X 10.6? Be great if there was a plugin that could run a script for each of the main OS's that Wordpress runs on.

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

• Wear and tear on server hard drive from filesystem polling by PHP script

  - by jackie

  So I'm working on a discussion platform, and various clients will visit http://host/thread.php, which will render the discussion thread to date in addition to a form to submit a new post. When a new post is submitted, I would like all of the other clients with browser windows open to have it appear in near-real-time. One of the constraints of my script is that it may not use a DBMS and it must stay in the filesystem. Additionally, I can't use any PECL/PEAR extensions like inotify or anything like that for IPC. The flow will look like this: Client A requests thread.php and the thread is so far empty, but nonetheless it opens a Server-Side Event at eventPusher.php. Client B does the same. Client A fills out a post in the form and and submits (POSTs) it to subHandler.php. ??? (subHandler stores the new submission into the main thread storefile which gets read from when a fresh, new client requests thread.php, in addition to somehow signalling to the continually-running eventPusher event-source that a new comment was posted and that it should echo the event-json to the client. How, exactly, it will send this signal I'm yet unsure of, but there are a few options that I've thought of -- this is the crux of the question, so see below for more clarification) eventPusher.php happily pushes the new event to the client and it shows up soon after it was originally submitted on all clients who have the page open's screens. Now for the #4 missing-link mystery-step, I see a few problems. I mean, either way, eventPusher is gonna be doing a while loop of some sort -- it's gonna be polling something, I think that much is clear. (If that's a bad assumption please do let me know.) Now, the simplest way would be subHandler gets invoked on the form submission, writes it to the main store in addition to newComments.xml, then exits without doing anything else. Then eventPusher checks in newComments.xml every X seconds (by the way, what would be a reasonable time interval here?) and if it finds something then it emits an event to the client. Now, my fear with this is that the server's hard drive will have to constantly start spinning up. Maybe this isn't the case, perhaps it would just get cached in RAM and the linux kernel would take care of this transparently such that filesystem access doesn't actually engage the device because the kernel knows that that particular file hasn't changed since last read. * idea #2: I have no idea how to go about this, but perhaps there is a variable scope that gets stored in general RAM on the system which can be read by any process. Like if we mega-exported a bash variable so that $new_post is normally false but it gets toggled to true by subHandler, and then back to flase once it's pushed to the client. I doubt there's such a variable scope in PHP directly, but I struggle with the concept of variable scope, I just can't seem to understand it no matter what I read on it. * idea #3: eventPusher queries ps in its whileloop for another instance of itself. If there's not another eventPusher active then it's highly unlikely that new comments will be getting submitted. It's okay if this only works =90% of the time, it doesn't need to be completely foolproof. * idea #4: eventPusher queries DMESG to see if that file's been written to recently. So to sum everything up, I need to have inter-php-script-communication in near-real-time that will work on a standard mod_php shared hosting setup without any elevated privileges, PHP addon modules, or other system adjustments that can't be done from the PHP script itself at runtime. With*out* spinning up the drive more than a few times. No SQL servers either. Apologies if my english isn't the best, I'm still trying to improve on it.

  Read the article

• Duplicate GET request from multiple IPs - can anyone explain this?

  - by dwq

  We've seen a pattern in our webserver access logs which we're having problem explaining. A GET request appears in the access log which is a legitimate, but private, url as part of normal e-commerce website use (by private, we mean there is a unique key in a url form variable generated specifically for that customer session). Then a few seconds later we get hit with an identical request maybe 10-15 times within the space of a second. The duplicate requests are all from different IP addresses. The UserAgent for the duplicates are all the same (but different from the original request). The reverse DNS lookup on the IPs for all the duplicates requests resolve to the same large hosting company. Can anyone think of a scenario what would explain this? EDIT 1 Here's an example that's probably anonymised beyond being any actual use, but it might give an idea of the sort of pattern we're seeing (it's from a search query as they sometimes get duplicated too): xx.xx.xx.xx - - [21/Jun/2013:21:42:57 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "http://www.ourdomain.com/index.html" "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0)" xx.xx.xx.xx - - [21/Jun/2013:21:43:03 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:03 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" UPDATE 2 Sometimes it is part of a checkout flow that's duplicated to I'd think twitter is unlikely.

  Read the article

• Windows 7 inbuilt and 3rd party (de)fragmentation related queries

  - by Karan

  I have a pretty good idea of how files end up getting fragmented. That said, I just copied ~3,200 files of varying sizes (from a few KB to ~20GB) from an external USB HDD to an internal, freshly formatted (under Windows 7 x64), NTFS, 2TB, 5400RPM, WD, SATA, non-system (i.e. secondary) drive, filling it up 57%. Since it should have been very much possible for each file to have been stored in one contiguous block, I expected the drive to be fragmented not more than 1-2% at most after this rather lengthy exercise (unfortunately this older machine doesn't support USB 3.0). Windows 7's inbuilt defrag utility told me after a quick analysis that the drive was fragmented only 1% or so, which dovetailed neatly with my expectations. However, just out of curiosity I downloaded and ran the latest portable x64 version of Piriform's Defraggler, and was shocked to see the drive being reported as being ~85% fragmented! The portable version of Auslogics Disk Defrag also agreed with Defraggler, and both clearly expected to grind away for ~10 hours to completely defragment the drive. 1) How in blazes could the inbuilt and 3rd party defrag utils disagree so badly? I mean, 10-20% variance is probably understandable, but 1% and 85% are miles apart! This Engineering Windows 7 blog post states: In Windows XP, any file that is split into more than one piece is considered fragmented. Not so in Windows Vista if the fragments are large enough – the defragmentation algorithm was changed (from Windows XP) to ignore pieces of a file that are larger than 64MB. As a result, defrag in XP and defrag in Vista will report different amounts of fragmentation on a volume. ... [Please read the entire post so the quote is not taken out of context.] Could it simply be that the 3rd party defrag utils ignore this post-XP change and continue to use analysis algos similar to those XP used? 2) Assuming that the 3rd party utils aren't lying about the real extent of fragmentation (which Windows is downplaying post-XP), how could the files have even got fragmented so badly given they were just copied over afresh to an empty drive? 3) If vastly differing analysis algos explain the yawning gap, which do I believe? I'm no defrag fanatic for sure, but 85% is enough to make me seriously consider spending 10 hours defragging this drive. On the other hand, 1% reported by Windows' own defragger clearly implies that there is no cause for concern and defragging would actually have negative consequences (as per the post). Is Windows' assumption valid and should I just let it be, or will there be any noticeable performance gains after running one of the 3rd party utils for 10 hours straight? 4) I see that out of the box Windows 7 defrag is scheduled to run weekly. Does anyone know whether it defrags every single time, or only if its analysis reveals a fragmentation percentage over a set threshold? If the latter, what is this threshold and can it be changed, maybe via a Registry edit? Thanks for reading through (my first query on this wonderful site!) and for any helpful replies. Also, if you're answering question #3, please keep in mind that any speed increases post defragging with 3rd party utils vis-à-vis Windows' inbuilt program should not include pre-Vista (preferably pre-Win7) examples. Further, examples of programs that made your system boot faster won't help in this case, since this is a non-system drive (although one that'll still be used daily).

  Read the article

• Open-source and client-side IRC-Client

  - by user125197

  I'm administrating a homepage with an IRC-Webclient. At the moment, it uses a Java-client, modified to be SSL-compatible and compatible with whatever design I want to use. The usual PJIRC thing, with users wishes and concerns implemented (I'll give you SSL-PJIRC if you want - no problem. The login-script will be improved for IE6-support this weekend, means write the object tag if an old IE is found, that's it. Rest runs perfectly well). But still, the better user experience would be a client that only requires the user to enable JavaScript. So, before I go into rewriting and customizing a complete Java-IRC-solution, I'd like to ask some other people - after researching for half a year of time. The requirements are: a) Free hosting, no cgi-bin is acceptable. A lot of hosters also have CGI supported, but it doesn't allow IRC-access. So, seems you are limited to x10-hosting for CGI:IRC. b) Solution must be open source (not free as in free beer, but free as in free speech - I want to be able to read every line of the code). c) Hosting cannot be limited to Windows-hosting. Free operation systems (anything with Linux, BSD, whatever - I think you get what I mean) must be possible. d) No server-side technology. I'm limited to everything that runs client-side only. (Well, a Java-Applet does...). d) Solution must support SSL. e) The side must be able to move. Means, you register to a new free hoster, load your things up via FileZilla and the thing simply runs. No server-concerning implementations needed. f) Old browsers must be supported. From all my research, there are two ways a) Java-Applet b) Use HTML5-Websockets (it is impossible to use the JavaScript-library I found, as it depends on ActiveX - means, Windows hosting). b) means "you are going to enter very unstable content". I worked with HTML5 for month, and, well ... Though, HTML5 also is not suitable for older browsers (old browser support is an absolutely necessary requirement). PHP by the way is a server side solution ... so no line of PHP. My idea now was a Java Applet, and a fallback which again is embedded and proprietary, but only requieres JavaScript (wsirc or Mibbit are great here, whilst I prefer wsirc ... and zooming fonts that are plainly to small, but worse, cannot read the code). So my question is - with free hosting, not installation on server, plain upload - do you see and open source, complelety client-side, ssl-compatible way to use or write a client? This wouldn't be my first programming project, I'm not afraid of the code. If there was a way and I had to write it, even from scratch, I'd do. From all I know, there sadly is none. But maybe some experienced admin has an idea? Best Wishes, yetanotheruser Sry my English isn't perfect. It's enough for programming at least.

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

• Reconstructing the disk order in RAID 6 with 7 disks

  - by rkotulla

  a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

  Read the article

• Make exact mp4 (H264) format for uploading to youtube

  - by WHITECOLOR

  With ffmpeg I'm converting video from mp3 and picture to upload it to youtube. After upload, conversion fails. Reasons are unknown. I believe the problem is in format. By the way If I'm uploading file 5 minutes length, it fails if I upload 30 seconds of this file it succeeds. I have donwload mp4 file from youtube. Then I uploaded it, it is done very fast. So a nice solution would be to convert videos to the same format that is done by google. I got the following output by mpeg: ffmpeg version N-44264-g070b0e1 Copyright (c) 2000-2012 the FFmpeg developers built on Sep 7 2012 17:38:57 with gcc 4.7.1 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runt ime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass - -enable-libcelt --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-l ibfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenj peg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheo ra --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-li bvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --ena ble-zlib libavutil 51. 72.100 / 51. 72.100 libavcodec 54. 55.100 / 54. 55.100 libavformat 54. 25.105 / 54. 25.105 libavdevice 54. 2.100 / 54. 2.100 libavfilter 3. 16.100 / 3. 16.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'youtubetrack0.mp4': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2012-10-02 22:58:57 Duration: 00:06:46.66, start: 0.000000, bitrate: 176 kb/s Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yu v420p, 450x360, 78 kb/s, 6 fps, 6 tbr, 12 tbn, 12 tbc Metadata: creation_time : 1970-01-01 00:00:00 handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, s16, 95 kb/s Metadata: creation_time : 2012-10-02 22:58:57 handler_name : IsoMedia File Produced by Google, 5-11-2011 Is it possible to construct ffmpeg parameters so that that would give the same format that google internally does? Is the information above sufficient? I couldn't construct needed params. For example I don't understand how to set tbn and what 95 kb/s mean in "Stream #0:1(und): Audio:". Now I just do: ffmpeg -i videoimage.jpg -i audio.mp3 video.mp4 Info I've got: ffmpeg version N-44998-gdf82454 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 2 2012 23:03:12 with gcc 4.7.1 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libcelt --enable-libopencore-amrnb --en able-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-librtmp --enable-libschroedinger - -enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc -- enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enab le-libxavs --enable-libxvid --enable-zlib libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 63.100 / 54. 63.100 libavformat 54. 29.105 / 54. 29.105 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.102 / 3. 19.102 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 encoder : Lavf54.25.105 Duration: 00:06:46.81, start: 0.000000, bitrate: 129 kb/s Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuvj420p, 450x360, 3392 kb/s, 25 fps, 25 tbr, 25 tbn, 50 tbc Metadata: handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, s16, 127 kb/s Metadata: handler_name : SoundHandler This video fails the conversion on youtube. I also tried to use other vcode parmam and extensions of output file (mp4, wmv, avi) but failed too. Would be greatful for help.

  Read the article

• SQL Server 2000 and SSL Encryption

  - by Angry_IT_Guru

  We are a datacenter that hsots a SQL Server 2000 environment which provides database services for a product we sell that is loaded as a rich-client applicatin at each of our many clients and their workstations. Currently today, the application uses straight ODBC connections from the client site to our datacenter. We need to begin encrypting the credentials -- since everything is clear-text today and the authentication is weakly encrypted -- and I'm trying to determine the best way to implement SSL on the server with minimizing the impact of the client. A few things, however: 1) We have our own Windows domain and all our servers are joined to our private domain. Our clietns no nothing of our domain. 2) Typically, our clients connect to our datacenter servers either by: a) Using TCP/IP address b) Using a DNS name that we publish via internet, zone transfers from our DNS servers to our customers, or the client can add static HOSTS entries. 3) From what I understand from enabling encryption is that I can go to the Network Utility and select the "encryption" option for the protocol that I wish to encrypt. Such as TCP/IP. 4) When the encryption option is selected, I have a choice of installing a third-party certificate or a self-signed. I have tested the self-signed, but do have potential issues. I'll explain in a bit. If I go with a third-party cert, such as Verisign, or Network solutions... what kind of certificate do I request? These aren't IIS certificates? When I go create a self-signed via Microsoft's certificate server, I have to select "Authentication certificate". What does this translate to in the third-party world? 5) If I create a self-signed certificate, I understand that the "issue to" name has to match the FQDN for the server that is running SQL. In my case, I have to use my private domain name. If I use this, what does this do for my clients when trying to connect to my SQL Server? Surely they cannot resolve my private DNS names on their network.... I've also verified that when the self-signed certificate is installed, it has to be in the local personal store for the user account that is running SQL Server. SQL Server will only start if the FQDN matches the "issue to" of the certificate and SQL is running under the account that has the certificate installed. If I use a self-signed certificate, does this mean I have to have every one of my clients install it to verify? 6) If I used a third-party certificate, which sounds like the best option, do all my clients have to have internet access when accessing my private servers of their private WAN connection to use to verify the certificate? What do I do about the FQDN? It sounds like they have to use my private domain name -- which is not published -- and can no longer use the one that I setup for them to use? 7) I plan on upgrading to SQL 2000 soon. Is setup of SSL any easier/better with SQL 2005 than SQL 2000? Any help or guiadance would be appreciated

  Read the article

• "Service Unavailable" when browsing to static HTML page in non-application IIS website on Windows 2003 (possibly SharePoint WSS 2.0 related?)

  - by Jordan Rieger

  Background: My client has an old Pentium III Windows 2003 server whose 16/36 GB disks are dying. On it he has a database-driven web site and email application that needs further customization by a developer (me). First we need to get it working on the new server. The original developer is no longer available to provide a system setup guide. So my client got a tech who imaged the old drives over to the new server and managed to get it booting. But the IIS-driven site no longer works. In fact it seems that IIS itself does not work. Problem: Service Unavailable when attempting to browse from the server itself to the URL for a local Web Site called test which I setup in IIS to serve a single static index.htm file. This I did to isolate the problem, and eliminate the client's application from the equation. The site is setup on port 80 with the host header "test.myclientsdomain.com", and I used the etc\hosts file to point that host at the local IP. I know the host entry took effect because I can ping it. When doing an iisreset, I get: Attempting start... Restart attempt failed. IIS Admin Service or a service dependent on IIS Admin is not active. It most likely failed to start, which may mean that it's disabled. Despite this message, the services all stay in the Started state. The only relevant System event logs I found are: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1002 Date: 11/4/2012 Time: 11:04:47 PM User: N/A Computer: ALPHA1 Description: Application pool 'DefaultAppPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool. Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1039 Date: 11/4/2012 Time: 11:13:12 PM User: N/A Computer: ALPHA1 Description: A process serving application pool 'DefaultAppPool' reported a failure. The process id was '5636'. The data field contains the error number. Data: 0000: 7e 00 07 80 ~.. And one Application event log: Event Type: Error Event Source: Windows SharePoint Services 2.0 Event Category: None Event ID: 1000 Date: 11/4/2012 Time: 11:34:04 PM User: N/A Computer: ALPHA1 Description: #50070: Unable to connect to the database STS_Config on ALPHA2\SharePoint. Check the database connection information and make sure that the database server is running. That last log tells me that the tech may have initially tried to have both the old and the new server running, by renaming the new server from ALPHA1 to ALPHA2. And perhaps SharePoint grabbed onto that change, and now can't tell that the machine name has been switched back to the old ALPHA1. But why would SharePoint interfere with a static IIS web site serving a single HTML file? The test site is not even within an Application pool (I clicked the Remove button.) What I have tried/eliminated: No relevant services seem to be disabled: IIS Admin, WWW Publishing, Sharepoint Timer Giving Full Control to All Users/Everyone on the c:\inetpub\test folder serving my test site. I can connect to and query the local SharePoint config database (ALPHA1\SHAREPOINT\STS_CONFIG) from SSMS. But when I try to do stsadm -o setconfigdb -connect -databaseserver ALPHA1\SHAREPOINT it tells me The SharePoint admininstration port does not exist. Please use stsadm.exe to create it. And when I do that, using the port 9487 specified in the IIS SharePoint Admin site config, it tells me the port is already in use. Needless to say, simply browsing to the admin site gives me a similar error about being unable to reach the config database. I didn't want to go further down the SharePoint path as it may be completed unrelated to my IIS issue, and I don't even know yet if SharePoint is required for this application to work. The app itself is ASP.Net/C#/Silverlight and a little MS Word integration (maybe that's where the SharePoint stuff comes in.)

  Read the article

• Set source address to use tun device does not work (Debian Squeeze)

  - by A. Donda

  there have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected through the tunnel using OpenVPN's "two more specific routes" trick, but I disabled that. My routing table is like this: 198.144.156.141 192.168.2.1 255.255.255.255 UGH 0 0 0 eth0 10.30.92.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 10.30.92.1 10.30.92.5 255.255.255.255 UGH 0 0 0 tun1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.30.92.5 0.0.0.0 UG 0 0 0 tun1 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 And the interface configuration is like this: # ifconfig eth0 Link encap:Ethernet HWaddr XX-XX- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fe8d:acbd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:394869 errors:0 dropped:0 overruns:0 frame:0 TX packets:293489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:388519578 (370.5 MiB) TX bytes:148817487 (141.9 MiB) Interrupt:20 Base address:0x6f00 tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.30.92.6 P-t-P:10.30.92.5 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:9885 (9.6 KiB) TX bytes:4380 (4.2 KiB) plus the lo device. The routing table has two default routes, one via eth0 through my local network router (DSL modem) at 192.168.2.1, and another via tun1 through the VPN's gateway. With this configuration, if I connect to a site, the route chosen is the direct one (because it has less hops?): # traceroute 8.8.8.8 -n traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.2.1 0.427 ms 0.491 ms 0.610 ms 2 213.191.89.13 17.981 ms 20.137 ms 22.141 ms 3 62.109.108.48 23.681 ms 25.009 ms 26.401 ms ... This is fine, because my goal is to send only traffic from specific applications through the tunnel (esp. transmission, using its -i / bind-address-ipv4 option). To test whether this can work at all, I check it first with traceroute's -s option: # traceroute 8.8.8.8 -n -s 10.30.92.6 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 * * * 2 * * * 3 * * * ... This I take to mean that connection using the tunnel's local address as source is not possible. What is possible (though only as root) is to specify the source interface: # traceroute 8.8.8.8 -n -i tun1 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 10.30.92.1 129.337 ms 297.758 ms 297.725 ms 2 * * * 3 198.144.152.17 297.653 ms 297.652 ms 297.650 ms ... So apparently the tun1 interface is working and it is possible to send packets through it. But selecting the source interface is not implemented in my actual target application (transmission), so I would like to get source address selection to work. What am I doing wrong?

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >