Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 382/432 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Sybase SQLAnywhere jConnect routines?

  - by jr

  I have a database which is part of a closed system and the end-user of the system would like me to write some reports using the data contains in a Sybase SQL Anywhere Database. The system doesn't provide the reports that they are looking for, but access to the data is available by connecting to this ASA database. The vendor of the software would likely prefer I not update the database and I am basically read-only as I am just doing some reporting. All is good, seal is not broken, warranty still intact, etc,etc.. My main problem is that I am using jConnect in order to read from the database, and jConnect requires some "jConnect Routines" to be installed into the database. I've found that I can make this happen by just doing an "Alter Database Upgrade JConnect On", but I just don't fully understand what this does and if there is any risks associated with it. So, my question is does anyone know exactly what jConnect routines are and how are they used? Is there any risk adding these to a database? Should I be worried about this?

  Read the article

• Cloud-aware programming and help choosing a good framework

  - by Shoaibi

  How can i write a cloud-aware application? e.g. an application that takes benefit of being deployed on cloud. Is it same as an application that runs or a vps/dedicated server? if not then what are the differences? are there any design changes? What are the procedures that i need to take if i am to migrate an application to cloud-aware? Also i am about to implement a web application idea which would need features like security, performance, caching, and more importantly free. I have been comparing some frameworks and found that django has least RAM/CPU usage and works great in prefork+threaded mode, but i have also read that django based sites stop to respond with huge load of connections. Other frameworks that i have seen/know are Zend, CakePHP, Lithium/Cake3, CodeIgnitor, Symfony, Ruby on Rails.... So i would leave this to your opinion as well, suggest me a good free framework based on my needs. Finally thanks for reading the essay ;)

  Read the article

• Selectively intercepting methods using autofac and dynamicproxy2

  - by Mark Simpson

  I'm currently doing a bit of experimenting using Autofac-1.4.5.676, autofac contrib and castle DynamicProxy2. The goal is to create a coarse-grained profiler that can intercept calls to specific methods of a particular interface. The problem: I have everything working perfectly apart from the selective part. I gather that I need to marry up my interceptor with an IProxyGenerationHook implementation, but I can't figure out how to do this. My code looks something like this: The interface that is to be intercepted & profiled (note that I only care about profiling the Update() method) public interface ISomeSystemToMonitor { void Update(); // this is the one I want to profile void SomeOtherMethodWeDontCareAboutProfiling(); } Now, when I register my systems with the container, I do the following: // Register interceptor gubbins builder.RegisterModule(new FlexibleInterceptionModule()); builder.Register<PerformanceInterceptor>(); // Register systems (just one in this example) builder.Register<AudioSystem>() .As<ISomeSystemToMonitor>) .InterceptedBy(typeof(PerformanceInterceptor)); All ISomeSystemToMonitor instances pulled out of the container are intercepted and profiled as desired, other than the fact that it will intercept all of its methods, not just the Update method. Now, how can I extend this to exclude all methods other than Update()? As I said, I don't understand how I'm meant to say "for the ProfileInterceptor, use this implementation of IProxyHookGenerator". All help appreciated, cheers! Also, please note that I can't upgrade to autofac2.x right now; I'm stuck with 1.

  Read the article

• How to Create Deterministic Guids

  - by desigeek

  In our application we are creating Xml files with an attribute that has a Guid value. This value needed to be consistent between file upgrades. So even if everything else in the file changes, the guid value for the attribute should remain the same. One obvious solution was to create a static dictionary with the filename and the Guids to be used for them. Then whenever we generate the file, we look up the dictionary for the filename and use the corresponding guid. But this is not feasible coz we might scale to 100's of files and didnt want to maintain big list of guids. So another approach was to make the Guid the same based on the path of the file. Since our file paths and application directory structure are unique, the Guid should be unique for that path. So each time we run an upgrade, the file gets the same guid based on its path. I found one cool way to generate such 'Deterministic Guids' (Thanks Elton Stoneman). It basically does this: private Guid GetDeterministicGuid(string input) { //use MD5 hash to get a 16-byte hash of the string: MD5CryptoServiceProvider provider = new MD5CryptoServiceProvider(); byte[] inputBytes = Encoding.Default.GetBytes(input); byte[] hashBytes = provider.ComputeHash(inputBytes); //generate a guid from the hash: Guid hashGuid = new Guid(hashBytes); return hashGuid; } So given a string, the Guid will always be the same. Are there any other approaches or recommended ways to doing this? What are the pros or cons of that method?

  Read the article

• How do I compress a Json result from ASP.NET MVC with IIS 7.5

  - by Gareth Saul

  I'm having difficulty making IIS 7 correctly compress a Json result from ASP.NET MVC. I've enabled static and dynamic compression in IIS. I can verify with Fiddler that normal text/html and similar records are compressed. Viewing the request, the accept-encoding gzip header is present. The response has the mimetype "application/json", but is not compressed. I've identified that the issue appears to relate to the MimeType. When I include mimeType="*/*", I can see that the response is correctly gzipped. How can I get IIS to compress WITHOUT using a wildcard mimeType? I assume that this issue has something to do with the way that ASP.NET MVC generates content type headers. The CPU usage is well below the dynamic throttling threshold. When I examine the trace logs from IIS, I can see that it fails to compress due to not finding a matching mime type. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files" noCompressionForProxies="false"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="application/json" enabled="true" /> </staticTypes> </httpCompression>

  Read the article

• when long polling, Why are my other requests taking so long?

  - by Pascal

  The client makes 2 concurrent requests. (1 which takes 60 seconds - long polling) and another which is NOT long polling - supposed to return right away. It does return right away when I'm not doing long polling. But as soon as I start doing long polling with the other thread, the other one takes forever to execute. Firebug shows that the request is waiting for 10-50 seconds. On the server, I profiled ALL requests from the moment the php script starts to the time it goes back to the client, and it shows that each one only took 300ms or less. This problem started about the same time I started doing long polling (with the other XHR requests). I'm using jquery for both requests. The server shows that it is under very light load. CPU and memory less then 2%. 8 processes running out of a pool of 15. (it doesn't seem to deviate much from that number 8, even when I run more ajax requests). I guess each process can run multiple ajax threads concurrently. I made sure to EXIT from all processes as soon as their done executing. I don't see how the process pool has run out, if there are still 7 unused processes listed under prstat -J. Also, the problem happens somewhat intermittently. Firefox should be able to handle 2 concurrent ajax requests. i dont get what the problem is.

  Read the article

• How to make NAnt send an email using a real account

  - by Turro

  First of all, I have already seen this post: nant mail issues but the only answer is not satisfactory (i.e.: doesn't work for me). I am using NAnt to get latest version of source, upgrade version of the libraries and application, build the application, build the setups... all the usual things, I bet. I would like NAnt to send an email to some people confirming the conclusion of the build process; I've already checked the official (pretty ugly, IMHO) documentation for the task, but the example, once copied and customized, doesn't work. This are the NAnt target and task I'm using: <target name="sendMail" > <mail from="[email protected]" tolist="[email protected];[email protected]" subject="Subject of email" mailhost="smtp.gmail.com" message="Your new release is ready!"> </mail> </target> The error message I get is: 530 5.7.0 Must issue a STARTTLS command first. It looks like that the task was designed for use by an account whose provider doesn't need authentication; but what can I do if I must use an external smtp server which requires authentication (telling my boss I need an smtp server in house is not an option)? Can anybody help/teach me? Thanks in advance...

  Read the article

• Better why of looping to detect change.

  - by Dremation

  As of now I'm using a while(true) method to detect changes in memory. The problem with this is it's kill the applications performance. I have a list of 30 pointers that need checked as rapidly as possible for changes, without sacrificing a huge performance loss. Anyone have ideas on this? memScan = new Thread(ScanMem); public static void ScanMem() { int i = addy.Length; while (true) { Thread.Sleep(30000); //I do this to cut down on cpu usage for (int j = 0; j < i; j++) { string[] values = addy[j].Split(new char[] { Convert.ToChar(",") }); //MessageBox.Show(values[2]); try { if (Memory.Scanner.getIntFromMem(hwnd, (IntPtr)Convert.ToInt32(values[0], 16), 32).ToString() != values[1].ToString()) { //Ok, it changed lets do our work //work if (Globals.Working) return; SomeFunction("Results: " + values[2].ToString(), "Memory"); Globals.Working = true; }//end if }//end try catch { } }//end for }//end while }//end void

  Read the article

• iPhone app stopped building crash reports

  - by BankStrong

  My app formerly created useful crash logs. I synced my iPhone in the past and found crash logs in library/logs/CrashReporter About a month ago, my app stopped creating crash reports. When I first discovered this problem, I assumed it was due to memory corruption (a possibility in my app). I just created a new project and added a crash to it. // Implement viewDidLoad to do additional setup after loading the view, // typically from a nib. - (void)viewDidLoad { NSMutableArray *array = [[NSMutableArray alloc] init]; [array removeObjectAtIndex:-1]; [super viewDidLoad]; } This app does not create a crash report either. Ideas I've started to explore: My phone is corrupted (tried restoring - somehow I brought it to the state from a few months ago) My XCode is corrupt (tried reinstalling, but current download demands Snow Leopard - and I can't upgrade to Snow Leopard online). This seems possible - I may have messed with device support around a month ago (similar to http://stackoverflow.com/questions/1224867/does-iphone-os-3-0-1-ruin-your-development-phone ) The location for crash logs has somehow moved. Suggestions?

  Read the article

• Infinite loop in regex in java

  - by carpediem

  Hello, My purpose is to match this kind of different urls: url.com my.url.com my.extended.url.com a.super.extended.url.com and so on... So, I decided to build the regex to have a letter or a number at start and end of the url, and to have a infinite number of "subdomains" with alphanumeric characters and a dot. For example, in "my.extended.url.com", "m" from "my" is the first class of the regex, "m" from "com" is the last class of the regex, and "y.", "extended." and "url." are the second class of the regex. Using the pattern and subject in the code below, I want the find method to return me a false because this url must not match, but it uses 100% of CPU and seems to stay in an infinite loop. String subject = "www.association-belgo-palestinienne-be"; Pattern pattern = Pattern.compile("^[A-Za-z0-9]\\.?([A-Za-z0-9_-]+\\.?)*[A-Za-z0-9]\\.[A-Za-z]{2,6}"); Matcher m = pattern.matcher(subject); System.out.println(" Start"); boolean hasFind = m.find(); System.out.println(" Finish : " + hasFind); Which only prints: Start I can't reproduce the problem using regex testers. Is it normal ? Is the problem coming from my regex ? Could it be due to my Java version (1.6.0_22-b04 / JVM 64 bit 17.1-b03) ? Thanks in advance for helping.

  Read the article

• Looking for a .Net ORM

  - by SLaks

  I'm looking for a .Net 3.5 ORM framework with a rather unusual set of requirements: I need to create and alter tables at runtime with schemas defined by my end-users. (Obviously, that wouldn't be strongly-typed; I'm looking for something like a DataTable there) I also want regular strongly-typed partial classes for rows in non-dynamic tables, with custom validation and other logic. (Like normal ORMs) I want to load the entire database (or some entire tables) once, and keep it in memory throughout the life of the (WinForms) GUI. (I have a shared SQL Server with a relatively slow connection) I also want regular LINQ support (like LINQ-to-SQL) for ASP.Net on the shared server (which has a fast connection to SQL Server) In addition to SQL Server, I also want to be able to use a single-file database that would support XCopy deployment (without installing SQL CE on the end-user's machine). (Probably Access or SQLite) Finally, it has to be free (unless it's OpenAccess) I'll probably have to write it myself, as I don't think there is an existing ORM that meets these requirements. However, I don't want to re-invent the wheel if there is one, hence this question. I'm using VS2010, but I don't know when my webhost (LFC) will upgrade to .Net 4.0

  Read the article

• What does the \- mean in the mvn dependency tree output

  - by Calm Storm

  Hi, I tried doing a mvn dependency:tree and I get a tree of dependencies. The output looks like below. I want to know what is the "-" symbol that is shown at times and the "+-" symbol for other dependencies (it doesnt seem to be the scope) My actual question is, My project depends on many modules which internally depends on many spring artifacts. There are a few version clashes. I want to upgrade all spring related libraries to say the latest one (2.6.x or above). What is the preferred way to do this? Should I declare all the deps spring-context, spring-support (and 10 other artifacts) in my pom.xml and point them to 2.6.x ? Is there any other better method ? [INFO] +- com.xxxx:yyy-jar:jar:1.0-SNAPSHOT:compile [INFO] | +- com.xxxx:zzz-commons:jar:1.0-SNAPSHOT:compile [INFO] | | +- org.springframework:spring-dao:jar:2.0.7:compile [INFO] | | +- org.springframework:spring-jdbc:jar:2.0.7:compile [INFO] | | +- org.springframework:spring-web:jar:2.0.7:compile [INFO] | | +- org.springframework:spring-support:jar:2.0.7:compile [INFO] | | +- net.sf.ehcache:ehcache:jar:1.2:compile [INFO] | | +- commons-collections:commons-collections:jar:3.2:compile [INFO] | | +- aspectj:aspectjweaver:jar:1.5.3:compile [INFO] | | +- betex-commons:betex-commons:jar:5.5.1-2:compile [INFO] | | \- javax.servlet:servlet-api:jar:2.4:compile [INFO] | +- org.springframework:spring-beans:jar:2.0.7:compile [INFO] | +- org.springframework:spring-jmx:jar:2.0.7:compile [INFO] | +- org.springframework:spring-remoting:jar:2.0.7:compile [INFO] | +- org.apache.cxf:cxf-rt-core:jar:2.0.2-incubator:compile [INFO] | | +- org.apache.cxf:cxf-api:jar:2.0.2-incubator:compile [INFO] | | | +- org.apache.geronimo.specs:geronimo-activation_1.1_spec:jar:1.0-M1:compile [INFO] | | | +- org.codehaus.woodstox:wstx-asl:jar:3.2.1:compile [INFO] | | | +- org.apache.neethi:neethi:jar:2.0.2:compile [INFO] | | | \- org.apache.cxf:cxf-common-schemas:jar:2.0.2-incubator:compile

  Read the article

• ABAddressBookGetPersonCount(ab) problem

  - by prathumca

  Why the call to ABAddressBookGetPersonCount(ab); is giving the problem? I have around 2000 contacts in my address book. When my app gets started I'm trying to read the entire address book. This works perfectly on simulator but causing crash on IPhone. The crash report is pointing to 9 AppSupport 0x31fbca1e 0x31fb6000 + 27166 // CPRecordStoreGetCountOfInstancesOfClassWhere + 0x7e 10 AddressBook 0x318df668 0x318d5000 + 42600 // ABCGetPersonCountInStore + 0x88 11 AddressBook 0x318ea450 0x318d5000 + 87120 // ABAddressBookGetPersonCount + 0x8 12 MyAddressBook 0x0000ad30 0x1000 + 40240 // -[MyAddressBookController readAB] + 0x2c0 13 MyAddressBook 0x0000a8ce 0x1000 + 39118 // -[MyAddressBookController start] + 0x4a What I'm doing in "readAB"? - (void) readAB { ABAddressBookRef ab = ABAddressBookCreate(); CFArrayRef contacts = ABAddressBookCopyArrayOfAllPeople(ab); CFIndex count = ABAddressBookGetPersonCount(ab); for(int i = 0; i < count; i++) { //doing some thing... } } If you observe the above crash report, it is clearly pointing to CFIndex count = ABAddressBookGetPersonCount(ab);. Whats wrong with this code? I'm sure that this code works perfectly on firmware 3.1.2. But now I upgraded firmware to 3.1.3. Is this upgrade is causing any trouble? Regards, prathumca.

  Read the article

• Figuring out the performance limitation of an ADC on a PIC microcontroller

  - by AKE

  I'm spec-ing the suitability of a microcontroller like PIC for an analog-to-digital application. This would be preferable to using external A/D chips. To do that, I've had to run through some computations, pulling the relevant parameters from the datasheets. I'm not sure I've got it right -- would appreciate a check! Here's the simplest example: PIC10F220 is the simplest possible PIC with an ADC. Runs at clock speed of 8MHz. Has an instruction cycle of 0.5us (4 clock steps per instruction) So: Taking Tacq = 6.06 us (acquisition time for ADC, assume chip temp. = 50*C) [datasheet p34] Taking Fosc = 8MHz (? clock speed) Taking divisor = 4 (4 clock steps per CPU instruction) This gives TAD = 0.5us (TAD = 1/(Fosc/divisor) ) Conversion time is 13*TAD [datasheet p31] This gives conversion time 6.5us ADC duration is then 12.56 us [? Tacq + 13*TAD] Assuming at least 2 instructions for load/store: This is another 1 us [0.5 us per instruction] Which would give max sampling rate of 73.7 ksps (1/13.56) Supposing 8 more instructions for real-time processing: This is another 4 us Thus, total ADC/handling time = 17.56us (12.56us + 1us + 4us) So expected upper sampling rate is 56.9 ksps. Nyquist frequency for this sampling rate is therefore 28 kHz. If this is right, it suggests the (theoretical) performance suitability of this chip's A/D is for signals that are bandlimited to 28 kHz. Is this a correct interpretation of the information given in the data sheet? Any pointers would be much appreciated! AKE

  Read the article

• Mysql latin1 turkish data and delphi 2010 utf8

  - by sabri.arslan

  Hello, I have tables collating latin1_general_ci and have turkish character values. And i can use this data on delphi 7+zeos with no problem. but i want to upgrade my delphi to 2010 version but zeos too slow as i saw. so i want to use odbc+ado or dbexpress solution. dbexpress solution works fine , display my data as entered and write as entered table without any change to column charset. but dbexpress has problems as i saw. for example when i select * from table which has column types as varchar,decimal,int,tinyint,text give av errors on xp systems. vista and 7 does not give any error and work fine(not fully tested). ado solution(dbgo) works fine but its not show my data as entered.its want everything be utf. but i don't want to convert my data to utf before test everything. how can i see my data as entered and write client side utf and store latin1(as zeos or dbexpress do). i was tried many other options. eg. mysql side collation and charset parameters. sorry for my bad english. i hope someone understand me. thanks.

  Read the article

• what is the exact way to use Endorsed directory in jdk1.6

  - by raticulin

  I want to upgrade my jaxws to 2.2 (jdk1.6 comes bundled with jaxws 2.1). My jdk is (I did not install public jre): java version "1.6.0_20" Java(TM) SE Runtime Environment (build 1.6.0_20-b02) Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode) In jaxws' own doc they explain how to do it: One way to fix this is to copy jaxws-api.jar and jaxb-api.jar into JRE endorsed directory, which is $JAVA_HOME/lib/endorsed (or $JDK_HOME/jre/lib/endorsed) But I am not sure this is having any effect in my installation. For starters I have only defined %JAVA_HOME%. And folder $JAVA_HOME/lib/endorsed is inexistant, so I created and copied the two jars. But if I do (wsgen is a tool from jaxws) wsgen -version I still get: JAX-WS RI 2.1.6 in JDK 6 I also tried creating folder JAVA_HOME\jre\lib\endorsed (notice that in the doc they say JDK_HOME, but as I only have JAVA_HOME I used this path). Still same wsgen output. My questions are: What is the difference between JAVA_HOME and JDK_HOME in the doc page? anything significant or just two ways to refer to JAVA_HOME ? Is 'wsgen -version' a valid way to check jaxws version that is used or this always calls the exe in the original jdk, but it does not mean endorsed jars will be used? Anyone knows very detailed steps to install jaxws2.2 in a jdk.16?

  Read the article

• How test a Delphi app with Application Verifier 4.0?

  - by mamcx

  I download the Application Verifier 4.0 to test my App for check if could have problems on Vista/7. I run from Delphi 2010 debugger, and stop in CPU view. Obviously, I don't understand anything about assembler!. So, I try running directly from the windows explorer, and the App die. (In fact, I don't understand well what exactly will do App Verifier: I expect some kind of friendly message). This is what i get: 7C81A3E2 C3 ret 7C81A3E3 90 nop 7C81A3E4 8BFF mov edi,edi ntdll.DbgUserBreakPoint: 7C81A3E6 CC int 3 7C81A3E7 C3 ret 7C81A3E8 8BFF mov edi,edi 7C81A3EA 8B442404 mov eax,[esp+$04] 7C81A3EE CC int 3 7C81A3EF C20400 ret $0004 ntdll.NtCurrentTeb: 7C81A3F2 64A118000000 mov eax, fs:[$00000018] 7C81A3F8 C3 ret ntdll.RtlInitString: 7C81A3F9 57 push edi Loading: :7c81a3e2 ntdll.DbgBreakPoint + 0x1 :10003b68 ; C:\WINDOWS\system32\vrfcore.dll :00396a9d ; C:\WINDOWS\system32\vfbasics.dll :00397316 ; C:\WINDOWS\system32\vfbasics.dll :7c84bcdb ; ntdll.dll :7c8316f8 ; ntdll.dll :7c83154f ; ntdll.dll :7c82855e ntdll.KiUserExceptionDispatcher + 0xe :0040aa00 GetUILanguages + $80 :0040b298 GetResourceModuleName + $124 :0040afde LoadResourceModule + $7A :0040a134 DelayLoadResourceModule + $2C :00406c40 @StartExe + $44 :77e6f23b ; C:\WINDOWS\system32\KERNEL32.dll

  Read the article

• iPhone universal app. MoviePlayer.framwork problem.

  - by e40pud

  I have application based on 3.0 iPhone OS SDK One of tasks is playing video (I use MPMoviePlayerController for this task) Now I try to make universal app working on both 3.0 and 3.2 OS I did all steps described in apple documentation: Upgrade Current Target for iPad; make run-time checking for symbols using [[UIDevice currentDevice] respondsToSelector:@selector(userInterfaceIdiom)] function. But when I start my application on device - iPhone with OS 3.1.3 my apllication is crashes with next log: Tue May 25 18:00:28 unknown SpringBoard[24] <Notice>: MultitouchHID(208b30) uilock state: 1 -> 0 Tue May 25 18:00:29 unknown SpringBoard[24] <Notice>: MultitouchHID(292580) device bootloaded Tue May 25 18:00:34 unknown UIKitApplication:...[0xaa0f][1517] <Notice>: dyld: Symbol not found: _MPMoviePlayerWillEnterFullscreenNotification Tue May 25 18:00:34 unknown UIKitApplication:...[0xaa0f][1517] <Notice>: Referenced from: /var/mobile/Applications/876EA35E-5756-436B-A9E2-5481D4D62050/....app/... Tue May 25 18:00:34 unknown UIKitApplication:...[0xaa0f][1517] <Notice>: Expected in: /System/Library/Frameworks/MediaPlayer.framework/MediaPlayer Tue May 25 18:00:35 unknown kernel[0] <Debug>: launchd[1517] Builtin profile: container (seatbelt) Tue May 25 18:00:35 unknown kernel[0] <Debug>: launchd[1517] Container: /private/var/mobile/Applications/876EA35E-5756-436B-A9E2-5481D4D62050 (seatbelt) Tue May 25 18:00:35 unknown ReportCrash[1518] <Notice>: Formulating crash report for process cnetmobile[1517] Tue May 25 18:00:36 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:...[0xaa0f]) Job appears to have crashed: Trace/BPT trap Tue May 25 18:00:36 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:...[0xaa0f]) Throttling respawn: Will start in 2147483646 seconds Tue May 25 18:00:36 unknown SpringBoard[24] <Warning>: Application '...' exited abnormally with signal 5: Trace/BPT trap Tue May 25 18:00:36 unknown ReportCrash[1518] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/..._2010-05-25-180034_...-iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0 Tue May 25 18:01:36 unknown SpringBoard[24] <Notice>: MultitouchHID(208b30) uilock state: 0 -> 1 As you can see the error is "Symbol not found: _MPMoviePlayerWillEnterFullscreenNotification". This symbol is notification available in MediaPlayer.framework starting from iPhone OS 3.2 So, what am I doing wrong? What I should do to have universal application working correct on OS 3.2 (with new available functionality) and older OSes (with their functionality)?

  Read the article

• How to speed up marching cubes?

  - by Dan Vinton

  I'm using this marching cube algorithm to draw 3D isosurfaces (ported into C#, outputting MeshGeomtry3Ds, but otherwise the same). The resulting surfaces look great, but are taking a long time to calculate. Are there any ways to speed up marching cubes? The most obvious one is to simply reduce the spatial sampling rate, but this reduces the quality of the resulting mesh. I'd like to avoid this. I'm considering a two-pass system, where the first pass samples space much more coarsely, eliminating volumes where the field strength is well below my isolevel. Is this wise? What are the pitfalls? Edit: the code has been profiled, and the bulk of CPU time is split between the marching cubes routine itself and the field strength calculation for each grid cell corner. The field calculations are beyond my control, so speeding up the cubes routine is my only option... I'm still drawn to the idea of trying to eliminate dead space, since this would reduce the number of calls to both systems considerably.

  Read the article

• Windows with Plesk Panel installs ActiveState Python 2.5.0 - any thoughts?

  - by B Mahoney

  I expect to run Pylons on a Windows Server 2003 and IIS 6 on a Virtual Private Server (VPS). Most work with the VPS is done through the Plesk 8.6 panel. The Plesk panel has a lot of maintenance advantages for us. However, this Plesk configuration installs ActiveState Python 2.5.0. The Parallels Plesk documents for 8.6 and version 9 insist that only this configuration should be installed. I'm not eager to settle for the baseline 2.5.0. but don't see any safe upgrade path. How has ActiveState Python 2.5.0 been for other users? Can you replace the Parallels\Plesk\Additional\Python with another distribution? I don't want to break Plesk, please. Previously, I followed these instructions, Serving a Pylons app with IIS - Pylons Cookbook Using the default web site IP address, I had Python 2.6.3 installing the ISAPI-WSGI dll in IIS so that I successfully ran Pylons in a virutalenv through IIS using the IP address, no domain name. I would be so happy if I could run this successful configuration for my domains while I must use Plesk. Tips and solutions appreciated.

  Read the article

• LaTex: why partially showing up references?

  - by HH

  The bib.style part may be the problem. If I do not reference to references, do they show up? I have listed all errors below, the file compiles so I don't know whether they are related to partially-showing-up-references. For example, work with many authors gets only one author listed. I want to see references fully, not partially. Headers $ grep bib header.tex \usepackage{natbib} \bibliographystyle{abbrvnat} Errors $ grep -n -A 7 -B 7 Error *.log combined.log-505-! Illegal unit of measure (pt inserted). combined.log-506-<to be read again> combined.log-507- \futurelet combined.log-508-l.353 \hline combined.log-509- combined.log-510-? combined.log-511- combined.log:512:! Package caption Error: cite undefined. combined.log-513- combined.log-514-See the caption package documentation for explanation. combined.log-515-Type H <return> for immediate help. combined.log-516- ... combined.log-517- combined.log-518-l.374 ...n={CPU O(mlog(n))}, cite={topcoder:node}] combined.log-519- -- combined.log-559- [] combined.log-560- combined.log-561-) [10] combined.log-562-\openout2 = `references.aux'. combined.log-563- combined.log-564- (./references.tex combined.log-565- combined.log:566:! LaTeX Error: \include cannot be nested. combined.log-567- combined.log-568-See the LaTeX manual or LaTeX Companion for explanation. combined.log-569-Type H <return> for immediate help. combined.log-570- ... combined.log-571- combined.log-572-l.1 \include{timeUse.tex} Bibs.bib @misc{ Gundersen, author = "G. Gundersen", title = "Data Structures in Java for Matrix Computations", year = "2002" } @book{ Lennart, author = "R. Lennart", title = "Mathematics Handbook for Science and Engineering BETA", year = "2004" }

  Read the article

• Figuring out the Nyquist performance limitation of an ADC on an example PIC microcontroller

  - by AKE

  I'm spec-ing the suitability of a dsPIC microcontroller for an analog-to-digital application. This would be preferable to using dedicated A/D chips and a separate dedicated DSP chip. To do that, I've had to run through some computations, pulling the relevant parameters from the datasheets. I'm not sure I've got it right -- would appreciate a check! (EDITED NOTE: The PIC10F220 in the example below was selected ONLY to walk through a simple example to check that I'm interpreting Tacq, Fosc, TAD, and divisor correctly in working through this sort of Nyquist analysis. The actual chips I'm considering for the design are the dsPIC33FJ128MC804 (with 16b A/D) or dsPIC30F3014 (with 12b A/D).) A simple example: PIC10F220 is the simplest possible PIC with an ADC Runs at clock speed of 8MHz. Has an instruction cycle of 0.5us (4 clock steps per instruction) So: Taking Tacq = 6.06 us (acquisition time for ADC, assume chip temp. = 50*C) [datasheet p34] Taking Fosc = 8MHz (? clock speed) Taking divisor = 4 (4 clock steps per CPU instruction) This gives TAD = 0.5us (TAD = 1/(Fosc/divisor) ) Conversion time is 13*TAD [datasheet p31] This gives conversion time 6.5us ADC duration is then 12.56 us [? Tacq + 13*TAD] Assuming at least 2 instructions for load/store: This is another 1 us [0.5 us per instruction] Which would give max sampling rate of 73.7 ksps (1/13.56) Supposing 8 more instructions for real-time processing: This is another 4 us Thus, total ADC/handling time = 17.56us (12.56us + 1us + 4us) So expected upper sampling rate is 56.9 ksps. Nyquist frequency for this sampling rate is therefore 28 kHz. If this is right, it suggests the (theoretical) performance suitability of this chip's A/D is for signals that are bandlimited to 28 kHz. Is this a correct interpretation of the information given in the data sheet in obtaining the Nyquist performance limit? Any opinions on the noise susceptibility of ADCs in PIC / dsPIC chips would be much appreciated! AKE

  Read the article

• Locating memory leak in Apache httpd process, PHP/Doctrine-based application

  - by Sam

  I have a PHP application using these components: Apache 2.2.3-31 on Centos 5.4 PHP 5.2.10 Xdebug 2.0.5 with Remote Debugging enabled APC 3.0.19 Doctrine ORM for PHP 1.2.1 using Query Caching and Results Caching via APC MySQL 5.0.77 using Query Caching I've noticed that when I start up Apache, I eventually end up 10 child processes. As time goes on, each process will grow in memory until each one approaches 10% of available memory, which begins to slow the server to a crawl since together they grow to take up 100% of memory. Here is a snapshot of my top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1471 apache 16 0 626m 201m 18m S 0.0 10.2 1:11.02 httpd 1470 apache 16 0 622m 198m 18m S 0.0 10.1 1:14.49 httpd 1469 apache 16 0 619m 197m 18m S 0.0 10.0 1:11.98 httpd 1462 apache 18 0 622m 197m 18m S 0.0 10.0 1:11.27 httpd 1460 apache 15 0 622m 195m 18m S 0.0 10.0 1:12.73 httpd 1459 apache 16 0 618m 191m 18m S 0.0 9.7 1:13.00 httpd 1461 apache 18 0 616m 190m 18m S 0.0 9.7 1:14.09 httpd 1468 apache 18 0 613m 190m 18m S 0.0 9.7 1:12.67 httpd 7919 apache 18 0 116m 75m 15m S 0.0 3.8 0:19.86 httpd 9486 apache 16 0 97.7m 56m 14m S 0.0 2.9 0:13.51 httpd I have no long-running scripts (they all terminate eventually, the longest being maybe 2 minutes long), and I am working under the assumption that once each script terminates, the memory it uses gets deallocated. (Maybe someone can correct me on that). My hunch is that it could be APC, since it stores data between requests, but at the same time, it seems weird that it would store data inside the httpd process. How can I track down which part of my app is causing the memory leak? What tools can I use to see how the memory usage is growing inside the httpd process and what is contributing to it?

  Read the article

• using JQuery and Prototype in the same page

  - by Don

  Hi, Several of my pages use both JQuery and Protoype. Since I upgraded to version 1.3 of JQuery this appears to be causing problems, because both libraries define a function named '$'. JQuery provides a function noConflict() which relinquishes control of $ to other libraries that may be using it. So it seems like I need to go through all my pages that look like this: <head> <script type="text/javascript" src="/obp/js/prototype.js"></script> <script type="text/javascript" src="/obp/js/jquery.js"></script> </head> and change them to look like this: <head> <script type="text/javascript" src="/obp/js/prototype.js"></script> <script type="text/javascript" src="/obp/js/jquery.js"></script> <script type="text/javascript"> jQuery.noConflict(); var $j = jQuery; </script> </head> I should then be able to use '$' for Prototype and '$j' (or 'jQuery') for JQuery. I'm not entirely happy about duplicating these 2 lines of code in every relevant page, and expect that at some point somebody is likely to forget to add them to a new page. I'd prefer to be able to do the following Create a file jquery-noconflict.js which "includes" jquery.js and the 2 lines of code shown above Import jquery-noconflict.js (instead of jquery.js) in all my JSP/HTML pages However, I'm not sure if it's possible to include one JS file in another, in the manner I've described? Of course an alternate solution is simply to add the 2 lines of code above to jquery.js directly, but if I do that I'll need to remember to do it every time I upgrade JQuery. Thanks in advance, Don

  Read the article

• Weird Issues with WPMU I Can't Figure Out

  - by HollerTrain

  I know I should post this on the WPMU forum, but no one writes me back and I'm just trying to find a larger audience hoping you have run into this issue as well. I have built a WPMU site for a client, and I am able to upload media into the Media Library and within a Post or Page perfectly. I thought my job was finished, yet the client can't upload any media at all. I'm located in Kentucky, they are located in New England (if that even matters). I had the client record their process of uploading as I thought they were simply not following my instructions for uploading, yet they are doing everything correctly. When uploading a file it goes through the process of allowing them to select a file and it says it uploads it, yet when it is finished uploading nothing is in the Media Library or in the Post. Video of the client trying to upload in Media Manager (http://www.screencast.com/users/CatherineWeber/folders/Jing/media/945d33fa-a752-45fd-9bc1-f76fc5a1814a) Video of the client trying to upload within a Post (http://www.screencast.com/users/CatherineWeber/folders/Jing/media/b5c60e25-f0b5-40c0-a820-c2fc9eb00906) Asking the client to disable Flash Uploader didn't work :( Yet, I can login to the WPMU site, access their blog's backend and can easily upload a ton of files. I am so lost at to what the issue is here. I am running version 2.8.4a, and will try to upgrade to latest release hoping this will fix things.

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >