Search Results

Search found 49465 results on 1979 pages for 'key value'.

Page 384/1979 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• Using Find/Replace with regular expressions inside a SSIS package

  - by jamiet

  Another one of those might-be-useful-again-one-day-so-I’ll-share-it-in-a-blog-post blog posts I am currently working on a SQL Server Integration Services (SSIS) 2012 implementation where each package contains a parameter called ETLIfcHist_ID: During normal execution this will get altered when the package is executed from the Execute Package Task however we want to make sure that at deployment-time they all have a default value of –1. Of course, they tend to get changed during development so I wanted a way of easily changing them all back to the default value. Opening up each package in turn and editing them was an option but given that we have over 40 packages and we might want to carry out this reset fairly frequently I needed a more automated method so I turned to Visual Studio’s Find/Replace… feature Of course, we don’t know what value will be in that parameter so I can’t simply search for a particular value; hence I opted to use a regular expression to identify the value to be change. In the rest of this blog post I’ll explain how to do that. For demonstration purposes I have taken the contents of a .dtsx file and stripped out everything except the element containing the parameters (<DTS:PackageParameters>), if you want to play along at home you can copy-paste the XML document below into a new XML file and open it up in Visual Studio: <?xml version="1.0"?> <DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts">   <DTS:PackageParameters>     <DTS:PackageParameter       DTS:CreationName=""       DTS:DataType="3"       DTS:Description="InterfaceHistory_ID: used for Lineage"       DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25846C7E}"       DTS:ObjectName="ETLIfcHist_ID">       <DTS:Property         DTS:DataType="3"         DTS:Name="ParameterValue">VALUE_TO_BE_CHANGED</DTS:Property>     </DTS:PackageParameter>     <DTS:PackageParameter       DTS:CreationName=""       DTS:DataType="3"       DTS:Description="Some other description"       DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25845C7E}"       DTS:ObjectName="SomeOtherObjectName">       <DTS:Property         DTS:DataType="3"         DTS:Name="ParameterValue">SomeOtherValue</DTS:Property>     </DTS:PackageParameter>   </DTS:PackageParameters> </DTS:Executable> We are trying to identify the value of the parameter whose name is ETLIfcHist_ID – notice that in the XML document above that value is VALUE_TO_BE_CHANGED. The following regular expression will find the appropriate portion of the XML document: {\<DTS\:PackageParameter[\n ]*DTS\:CreationName="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:DataType="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:Description="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:DTSID="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:ObjectName="ETLIfcHist_ID"\>[\n ]*\<DTS\:Property[\n ]*DTS\:DataType="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:Name="ParameterValue"\>}[A-Za-z0-9\:_\{\}- ]*{\<\/DTS\:Property\>} I have highlighted the name of the parameter that we’re looking for. I have also highlighted two portions identified by pairs of curly braces “{…}”; these are important because they pick out the two portions either side of the value I want to replace, in other words the portions highlighted here: <DTS:PackageParameters>     <DTS:PackageParameter       DTS:CreationName=""       DTS:DataType="3"       DTS:Description="InterfaceHistory_ID: used for Lineage"       DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25846C7E}"       DTS:ObjectName="ETLIfcHist_ID">       <DTS:Property         DTS:DataType="3"         DTS:Name="ParameterValue">VALUE_TO_BE_CHANGED</DTS:Property>     </DTS:PackageParameter> Those sections in the curly braces are termed tag expressions and can be identified in the replace expression using a backslash and a number identifying which tag expression you’re referring to according to its ordinal position. Hence, our replace expression is simply: \1-1\2 We’re saying the portion of our file identified by the regular expression should be replaced by the first curly brace section, then the literal –1, then the second curly brace section. Make sense? Give it a go yourself by plugging those two expressions into Visual Studio’s Find and Replace dialog. If you set it to look in “All Open Documents” then you can open up the code-behind of all your packages and change all of them at once. The Find and Replace dialog will look like this: That’s it! I realise that not everyone will be looking to change the value of a parameter but hopefully I have shown you a technique that you can modify to work for your own scenario. Given that this blog post is, y’know, on the web I have no doubt that someone is going to find a fault with my find regex expression and if that person is you….that’s OK. Let me know about it in the comments below and perhaps we can work together to come up with something better! Note that some parameters may have a different set of properties (for example some, but not all, of my parameters have a DTS:Required attribute) so your find regular expression may have to change accordingly. When researching this I found the following article to be invaluable: Visual Studio Find/Replace Regular Expression Usage @Jamiet

  Read the article

• Using Table-Valued Parameters With SQL Server Reporting Services

  - by Jesse

  In my last post I talked about using table-valued parameters to pass a list of integer values to a stored procedure without resorting to using comma-delimited strings and parsing out each value into a TABLE variable. In this post I’ll extend the “Customer Transaction Summary” report example to see how we might leverage this same stored procedure from within an SQL Server Reporting Services (SSRS) report. I’ve worked with SSRS off and on for the past several years and have generally found it to be a very useful tool for building nice-looking reports for end users quickly and easily. That said, I’ve been frustrated by SSRS from time to time when seemingly simple things are difficult to accomplish or simply not supported at all. I thought that using table-valued parameters from within a SSRS report would be simple, but unfortunately I was wrong. Customer Transaction Summary Example Let’s take the “Customer Transaction Summary” report example from the last post and try to plug that same stored procedure into an SSRS report. Our report will have three parameters: Start Date – beginning of the date range for which the report will summarize customer transactions End Date – end of the date range for which the report will summarize customer transactions Customer Ids – One or more customer Ids representing the customers that will be included in the report The simplest way to get started with this report will be to create a new dataset and point it at our Customer Transaction Summary report stored procedure (note that I’m using SSRS 2012 in the screenshots below, but there should be little to no difference with SSRS 2008): When you initially create this dataset the SSRS designer will try to invoke the stored procedure to determine what the parameters and output fields are for you automatically. As part of this process the following dialog pops-up: Obviously I can’t use this dialog to specify a value for the ‘@customerIds’ parameter since it is of the IntegerListTableType user-defined type that we created in the last post. Unfortunately this really throws the SSRS designer for a loop, and regardless of what combination of Data Type, Pass Null Value, or Parameter Value I used here, I kept getting this error dialog with the message, "Operand type clash: nvarchar is incompatible with IntegerListTableType". This error message makes some sense considering that the nvarchar type is indeed incompatible with the IntegerListTableType, but there’s little clue given as to how to remedy the situation. I don’t know for sure, but I think that behind-the-scenes the SSRS designer is trying to give the @customerIds parameter an nvarchar-typed SqlParameter which is causing the issue. When I first saw this error I figured that this might just be a limitation of the dataset designer and that I’d be able to work around the issue by manually defining the parameters. I know that there are some special steps that need to be taken when invoking a stored procedure with a table-valued parameter from ADO .NET, so I figured that I might be able to use some custom code embedded in the report  to create a SqlParameter instance with the needed properties and value to make this work, but the “Operand type clash" error message persisted. The Text Query Approach Just because we’re using a stored procedure to create the dataset for this report doesn’t mean that we can’t use the ‘Text’ Query Type option and construct an EXEC statement that will invoke the stored procedure. In order for this to work properly the EXEC statement will also need to declare and populate an IntegerListTableType variable to pass into the stored procedure. Before I go any further I want to make one point clear: this is a really ugly hack and it makes me cringe to do it. Simply put, I strongly feel that it should not be this difficult to use a table-valued parameter with SSRS. With that said, let’s take a look at what we’ll have to do to make this work. Manually Define Parameters First, we’ll need to manually define the parameters for report by right-clicking on the ‘Parameters’ folder in the ‘Report Data’ window. We’ll need to define the ‘@startDate’ and ‘@endDate’ as simple date parameters. We’ll also create a parameter called ‘@customerIds’ that will be a mutli-valued Integer parameter: In the ‘Available Values’ tab we’ll point this parameter at a simple dataset that just returns the CustomerId and CustomerName of each row in the Customers table of the database or manually define a handful of Customer Id values to make available when the report runs. Once we have these parameters properly defined we can take another crack at creating the dataset that will invoke the ‘rpt_CustomerTransactionSummary’ stored procedure. This time we’ll choose the ‘Text’ query type option and put the following into the ‘Query’ text area: 1: exec('declare @customerIdList IntegerListTableType ' + @customerIdInserts + 2: ' EXEC rpt_CustomerTransactionSummary 3: @startDate=''' + @startDate + ''', 4: @endDate='''+ @endDate + ''', 5: @customerIds=@customerIdList')   By using the ‘Text’ query type we can enter any arbitrary SQL that we we want to and then use parameters and string concatenation to inject pieces of that query at run time. It can be a bit tricky to parse this out at first glance, but from the SSRS designer’s point of view this query defines three parameters: @customerIdInserts – This will be a Text parameter that we use to define INSERT statements that will populate the @customerIdList variable that is being declared in the SQL. This parameter won’t actually ever get passed into the stored procedure. I’ll go into how this will work in a bit. @startDate – This is a simple date parameter that will get passed through directly into the @startDate parameter of the stored procedure on line 3. @endDate – This is another simple data parameter that will get passed through into the @endDate parameter of the stored procedure on line 4. At this point the dataset designer will be able to correctly parse the query and should even be able to detect the fields that the stored procedure will return without needing to specify any values for query when prompted to. Once the dataset has been correctly defined we’ll have a @customerIdInserts parameter listed in the ‘Parameters’ tab of the dataset designer. We need to define an expression for this parameter that will take the values selected by the user for the ‘@customerIds’ parameter that we defined earlier and convert them into INSERT statements that will populate the @customerIdList variable that we defined in our Text query. In order to do this we’ll need to add some custom code to our report using the ‘Report Properties’ dialog: Any custom code defined in the Report Properties dialog gets embedded into the .rdl of the report itself and (unfortunately) must be written in VB .NET. Note that you can also add references to custom .NET assemblies (which could be written in any language), but that’s outside the scope of this post so we’ll stick with the “quick and dirty” VB .NET approach for now. Here’s the VB .NET code (note that any embedded code that you add here must be defined in a static/shared function, though you can define as many functions as you want): 1: Public Shared Function BuildIntegerListInserts(ByVal variableName As String, ByVal paramValues As Object()) As String 2: Dim insertStatements As New System.Text.StringBuilder() 3: For Each paramValue As Object In paramValues 4: insertStatements.AppendLine(String.Format("INSERT {0} VALUES ({1})", variableName, paramValue)) 5: Next 6: Return insertStatements.ToString() 7: End Function   This method takes a variable name and an array of objects. We use an array of objects here because that is how SSRS will pass us the values that were selected by the user at run-time. The method uses a StringBuilder to construct INSERT statements that will insert each value from the object array into the provided variable name. Once this method has been defined in the custom code for the report we can go back into the dataset designer’s Parameters tab and update the expression for the ‘@customerIdInserts’ parameter by clicking on the button with the “function” symbol that appears to the right of the parameter value. We’ll set the expression to: 1: =Code.BuildIntegerListInserts("@customerIdList ", Parameters!customerIds.Value)   In order to invoke our custom code method we simply need to invoke “Code.<method name>” and pass in any needed parameters. The first parameter needs to match the name of the IntegerListTableType variable that we used in the EXEC statement of our query. The second parameter will come from the Value property of the ‘@customerIds’ parameter (this evaluates to an object array at run time). Finally, we’ll need to edit the properties of the ‘@customerIdInserts’ parameter on the report to mark it as a nullable internal parameter so that users aren’t prompted to provide a value for it when running the report. Limitations And Final Thoughts When I first started looking into the text query approach described above I wondered if there might be an upper limit to the size of the string that can be used to run a report. Obviously, the size of the actual query could increase pretty dramatically if you have a parameter that has a lot of potential values or you need to support several different table-valued parameters in the same query. I tested the example Customer Transaction Summary report with 1000 selected customers without any issue, but your mileage may vary depending on how much data you might need to pass into your query. If you think that the text query hack is a lot of work just to use a table-valued parameter, I agree! I think that it should be a lot easier than this to use a table-valued parameter from within SSRS, but so far I haven’t found a better way. It might be possible to create some custom .NET code that could build the EXEC statement for a given set of parameters automatically, but exploring that will have to wait for another post. For now, unless there’s a really compelling reason or requirement to use table-valued parameters from SSRS reports I would probably stick with the tried and true “join-multi-valued-parameter-to-CSV-and-split-in-the-query” approach for using mutli-valued parameters in a stored procedure.

  Read the article

• SQL SERVER – 2011 – SEQUENCE is not IDENTITY

  - by pinaldave

  Yesterday I posted blog post on the subject SQL SERVER – 2011 – Introduction to SEQUENCE – Simple Example of SEQUENCE and I received comment where user was not clear about difference between SEQUENCE and IDENTITY. The reality is that SEQUENCE not like IDENTITY. There is very clear difference between them. Identity is about single column. Sequence is always incrementing and it is not dependent on any table. Here is the quick example of the same. USE AdventureWorks2008R2 GO CREATE SEQUENCE [Seq] AS [int] START WITH 1 INCREMENT BY 1 MAXVALUE 20000 GO -- Run five times SELECT NEXT VALUE FOR Seq AS SeqNumber; SELECT NEXT VALUE FOR Seq AS SeqNumber; SELECT NEXT VALUE FOR Seq AS SeqNumber; SELECT NEXT VALUE FOR Seq AS SeqNumber; SELECT NEXT VALUE FOR Seq AS SeqNumber; GO -- Clean Up DROP SEQUENCE [Seq] GO Here is the resultset. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• rpm rollback ignoring rpms - no error output

  - by John H

  Issue rpm rollback is not working with a set of repackaged rpms created in the last couple days, but does work with more recent ones. [root@host1 repackage]# ls -l zsh-4.2.6-* -rw-r--r-- 1 root root 1788283 Apr 10 2011 zsh-4.2.6-3.el5.i386.rpm -rw-r--r-- 1 root root 1788691 Aug 18 04:38 zsh-4.2.6-5.el5.i386.rpm [root@host1 repackage]# rpm -q zsh zsh-4.2.6-6.el5 [root@host1 repackage]# rpm --test -Uvh --rollback 'Aug 18 01:00' [root@host1 repackage]# rpm -e zsh [root@host1 repackage]# [root@host1 repackage]# ls -l zsh* -rw-r--r-- 1 root root 1788283 Apr 10 2011 zsh-4.2.6-3.el5.i386.rpm -rw-r--r-- 1 root root 1788691 Aug 18 04:38 zsh-4.2.6-5.el5.i386.rpm -rw-r--r-- 1 root root 1789064 Aug 20 09:06 zsh-4.2.6-6.el5.i386.rpm [root@host1 repackage]# cp zsh-4.2.6-6.el5.i386.rpm /tmp [root@host1 repackage]# rpm --test -Uvh --rollback 'Aug 18 01:00' Rollback packages (+1/-0) to Mon Aug 20 09:02:16 2012 (0x50323558): Preparing... ########################################### [100%] Cleaning up repackaged packages: Removing /var/spool/repackage/zsh-4.2.6-6.el5.i386.rpm: [root@host1 repackage]# ls -l zsh-4.2.6-* -rw-r--r-- 1 root root 1788283 Apr 10 2011 zsh-4.2.6-3.el5.i386.rpm -rw-r--r-- 1 root root 1788691 Aug 18 04:38 zsh-4.2.6-5.el5.i386.rpm [root@host1 repackage]# cp /tmp/zsh-4.2.6-6.el5.i386.rpm . [root@host1 repackage]# rpm -Uvh --rollback 'Aug 18 01:00' Rollback packages (+1/-0) to Mon Aug 20 09:06:05 2012 (0x5032363d): Preparing... ########################################### [100%] 1:zsh ########################################### [ 50%] Cleaning up repackaged packages: Removing /var/spool/repackage/zsh-4.2.6-6.el5.i386.rpm: [root@host1 repackage]# rpm --test -Uvh --rollback 'April 9' [root@host1 repackage]# Now, if I run my test commands with -Uvvh I get debug messages to stderror which shows me that rpm reads each of the rpm files in /var/spool/repackage. The only interesting bit is the "expected size" but after searching, the expected size should be different, as it records the files as they are on the filesystem. D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: opening db index /var/lib/rpm/Installtid rdonly mode=0x0 D: opening db index /var/lib/rpm/Pubkeys rdonly mode=0x0 D: read h# 769 Header sanity check: OK D: ========== DSA pubkey id 53268101 37017186 (h#769) D: read h# 32 Header V3 DSA signature: OK, key ID 37017186 D: read h# 40 Header V3 DSA signature: OK, key ID 37017186 ... D: read h# 1753 Header V3 DSA signature: OK, key ID 37017186 D: Expected size: 3628918 = lead(96)+sigs(344)+pad(0)+data(3628478) D: Actual size: 3583695 D: /var/spool/repackage/Deployment_Guide-en-US-5.2-11.noarch.rpm: Header V3 DSA signature: OK, key ID 37017186 D: Expected size: 1100789 = lead(96)+sigs(344)+pad(0)+data(1100349) D: Actual size: 1109281 D: /var/spool/repackage/NetworkManager-0.7.0-10.el5_5.2.i386.rpm: Header V3 DSA signature: OK, key ID 37017186 D: Expected size: 1098167 = lead(96)+sigs(344)+pad(0)+data(1097727) D: Actual size: 1106179 D: /var/spool/repackage/NetworkManager-0.7.0-9.el5.i386.rpm: Header V3 DSA signature: OK, key ID 37017186 D: Expected size: 84351 = lead(96)+sigs(344)+pad(0)+data(83911) D: Actual size: 85378 ... D: Expected size: 1788276 = lead(96)+sigs(344)+pad(0)+data(1787836) D: Actual size: 1788691 D: /var/spool/repackage/zsh-4.2.6-5.el5.i386.rpm: Header V3 DSA signature: OK, key ID 37017186 D: --- erase h#1758 D: closed db index /var/lib/rpm/Pubkeys D: closed db index /var/lib/rpm/Installtid D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages D: May free Score board((nil)) I am able to copy these rpms out of the repackage directory and if I run them through cpio, extract the files. I also tried backing up and rebuilding the rpm database - no change. System Information: RHEL 5.8 rpm 4.4.2.3 /etc/yum.conf tsflags=repackage /etc/rpm/macros %_repackage_all_erasures 1

  Read the article

• INVITATION: WEBCENTER IMPLEMENTATION SPECIALIST EXAM PREPARATION WEBCASTS

  - by mseika

  Oracle Partner Network would like to invite you to Refresh Courses for WebCenter Content and WebCenter Portal, to help partners to prepare for the WebCenter Implementation Specialist EXAMS. This is a 3 hours intensive refresher partner-only training session, providing attendees with an overview of WebCenter Content and WebCenter Portal functions and related topics. After the refresher part you will be able to take the relevant Implementation Specialist EXAM depending on your personal focus.NOTE: This is only suitable for experienced WebCenter Content or WebCenter Portal practitioners Who should attend? Partner Consultants who want to become an Oracle WebCenter Content or a WebCenter Portal Certified Implementation Specialist or both, that will help them to differentiate themselves in front of customers and support their Companies to become Specialized. Webcast Details: Date Topic Speaker Web Call Details Intercall Details December 14th WebCenter Content Refresh Course Markus Neubauer, Silbury WebCenter Content Specialized Partner Join Webcast Dial-in numbers: CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249533/1412 Date Topic Speaker Web Call Details Intercall Details January 10th WebCenter Portal Refresh Course Yannick Ongena, InfoMentum WebCenter Portal Specialized Partner Join Webcast Dial-in numbers: CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249375/1001 Date Topic Speaker Web Call Details Intercall Details February 22nd WebCenter Content Refresh Course Markus Neubauer, Silbury WebCenter Content Specialized Partner Join Webcast Dial-in numbers: CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249541/2202 Date Topic Speaker Web Call Details Intercall Details March 13th WebCenter Portal Refresh Course Yannick Ongena, InfoMentum WebCenter Portal Specialized Partner Join Webcast Dial-in numbers: CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249549/1303 Local dial-in numbers can be found here . Next Steps: After the Webcast you will receive the Training material and FREE Vouchers to book and take the: Oracle ECM 11g Certified Implementation Specialist EXAM Oracle WebCenter 11g Essentials EXAM Booking with Voucher can be done on www.pearsonvue.com. Note: FREE Vouchers will be send after attending the webcast.  

  Read the article

• SQL SERVER – SSIS Parameters in Parent-Child ETL Architectures – Notes from the Field #040

  - by Pinal Dave

  [Notes from Pinal]: SSIS is very well explored subject, however, there are so many interesting elements when we read, we learn something new. A similar concept has been Parent-Child ETL architecture’s relationship in SSIS. Linchpin People are database coaches and wellness experts for a data driven world. In this 40th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to understand SSIS Parameters in Parent-Child ETL Architectures. In this brief Notes from the Field post, I will review the use of SSIS parameters in parent-child ETL architectures. A very common design pattern used in SQL Server Integration Services is one I call the parent-child pattern.  Simply put, this is a pattern in which packages are executed by other packages.  An ETL infrastructure built using small, single-purpose packages is very often easier to develop, debug, and troubleshoot than large, monolithic packages.  For a more in-depth look at parent-child architectures, check out my earlier blog post on this topic. When using the parent-child design pattern, you will frequently need to pass values from the calling (parent) package to the called (child) package.  In older versions of SSIS, this process was possible but not necessarily simple.  When using SSIS 2005 or 2008, or even when using SSIS 2012 or 2014 in package deployment mode, you would have to create package configurations to pass values from parent to child packages.  Package configurations, while effective, were not the easiest tool to work with.  Fortunately, starting with SSIS in SQL Server 2012, you can now use package parameters for this purpose. In the example I will use for this demonstration, I’ll create two packages: one intended for use as a child package, and the other configured to execute said child package.  In the parent package I’m going to build a for each loop container in SSIS, and use package parameters to pass in a value – specifically, a ClientID – for each iteration of the loop.  The child package will be executed from within the for each loop, and will create one output file for each client, with the source query and filename dependent on the ClientID received from the parent package. Configuring the Child and Parent Packages When you create a new package, you’ll see the Parameters tab at the package level.  Clicking over to that tab allows you to add, edit, or delete package parameters. As shown above, the sample package has two parameters.  Note that I’ve set the name, data type, and default value for each of these.  Also note the column entitled Required: this allows me to specify whether the parameter value is optional (the default behavior) or required for package execution.  In this example, I have one parameter that is required, and the other is not. Let’s shift over to the parent package briefly, and demonstrate how to supply values to these parameters in the child package.  Using the execute package task, you can easily map variable values in the parent package to parameters in the child package. The execute package task in the parent package, shown above, has the variable vThisClient from the parent package mapped to the pClientID parameter shown earlier in the child package.  Note that there is no value mapped to the child package parameter named pOutputFolder.  Since this parameter has the Required property set to False, we don’t have to specify a value for it, which will cause that parameter to use the default value we supplied when designing the child pacakge. The last step in the parent package is to create the for each loop container I mentioned earlier, and place the execute package task inside it.  I’m using an object variable to store the distinct client ID values, and I use that as the iterator for the loop (I describe how to do this more in depth here).  For each iteration of the loop, a different client ID value will be passed into the child package parameter. The final step is to configure the child package to actually do something meaningful with the parameter values passed into it.  In this case, I’ve modified the OleDB source query to use the pClientID value in the WHERE clause of the query to restrict results for each iteration to a single client’s data.  Additionally, I’ll use both the pClientID and pOutputFolder parameters to dynamically build the output filename. As shown, the pClientID is used in the WHERE clause, so we only get the current client’s invoices for each iteration of the loop. For the flat file connection, I’m setting the Connection String property using an expression that engages both of the parameters for this package, as shown above. Parting Thoughts There are many uses for package parameters beyond a simple parent-child design pattern.  For example, you can create standalone packages (those not intended to be used as a child package) and still use parameters.  Parameter values may be supplied to a package directly at runtime by a SQL Server Agent job, through the command line (via dtexec.exe), or through T-SQL. Also, you can also have project parameters as well as package parameters.  Project parameters work in much the same way as package parameters, but the parameters apply to all packages in a project, not just a single package. Conclusion Of the numerous advantages of using catalog deployment model in SSIS 2012 and beyond, package parameters are near the top of the list.  Parameters allow you to easily share values from parent to child packages, enabling more dynamic behavior and better code encapsulation. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at another IO-related wait type. From Book On-Line: Occurs when a task is waiting for I/Os to finish. ASYNC_IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. If by any means your application that’s connected to SQL Server is processing the data very slowly, this type of wait can occur. Several long-running database operations like BACKUP, CREATE DATABASE, ALTER DATABASE or other operations can also create this wait type. Reducing ASYNC_IO_COMPLETION wait: When it is an issue related to IO, one should check for the following things associated to IO subsystem: Look at the programming and see if there is any application code which processes the data slowly (like inefficient loop, etc.). Note that it should be re-written to avoid this  wait type. Proper placing of the files is very important. We should check the file system for proper placement of the files – LDF and MDF on separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is a higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly and so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on the development setup (test environment). As soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very likely to happen that there are no proper indexes on the system and yet there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the following two articles I wrote that talk about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SSH into Fedora 17 will not work with new users

  - by psion

  I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• What are the common Control combinations in a terminal setting

  - by Hamish Downer

  I would like to have a good guide to the common Control key combinations in use in bash (and similar) shells and the combinations used by common programs in use in those shells. My particular motivation is to be able to run GNU screen on one computer, ssh to a second computer and use screen and irssi on that computer. So I need to use something other than Ctrl-A to control one of the screen sessions. So I need to know what are Control key combinations are safe to use. But I imagine this list would be useful for others who want to bind custom actions to Control key combinations. I reckon we'd be best to group the Control key combinations by application (eg. bash itself, screen, vim, emacs), to make it easy to spot the applications you use or can ignore. So please one application per answer - hope that works.

  Read the article

• SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at an IO-related wait types. From Book On-Line: Occurs while waiting for I/O operations to complete. This wait type generally represents non-data page I/Os. Data page I/O completion waits appear as PAGEIOLATCH_* waits. IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. This is a good indication that IO needs to be looked over here. Reducing IO_COMPLETION wait: When it is an issue concerning the IO, one should look at the following things related to IO subsystem: Proper placing of the files is very important. We should check the file system for proper placement of files – LDF and MDF on a separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk),etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as the configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on development (test environment) set up and as soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very possible that there are no proper indexes in the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the two articles that I wrote; they are about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Types, SQL White Papers, T SQL, Technology

  Read the article

• OpenVPN Clients using server's connection (with no default gateway)

  - by Branden Martin

  I wanted an OpenVPN server so that I could create a private VPN network for staff to connect to the server. However, not as planned, when clients connect to the VPN, it's using the VPN's internet connection (ex: when going to whatsmyip.com, it's that of the server and not the clients home connection). server.conf local <serverip> port 1194 proto udp dev tun ca ca.crt cert x.crt key x.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 9 client.conf client dev tun proto udp remote <srever> 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert x.crt key x.key ns-cert-type server comp-lzo verb 3 Server's route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 69.64.48.0 * 255.255.252.0 U 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 Server's IP Tables Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-proftpd tcp -- anywhere anywhere multiport dports ftp,ftp-data,ftps,ftps-data fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-proftpd (1 references) target prot opt source destination RETURN all -- anywhere anywhere Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere My goal is that clients can only talk to the server and other clients that are connected. Hope I made sense. Thanks for the help!

  Read the article

• Passwords and Keys in Linux

  - by PeanutsMonkey

  In a fit of desperation when I had my wireless connection die on me, I thought it was a problem with the key I had created at the start when I initially configured the wireless connection and hence deleted it. The option to create the key had presented itself when I created the wireless connection. It no longer asks me to. Now I am back online, do I have re-create the password and key I had before? If so, what do I choose and why? The options I have are as follows; PGP Stored password Password keyring Secure shell key The first and last option seem to be obvious and I have no idea about the differences between the second and third options. Why do I need a stored password or password keyring in all scenarios and not just the wireless issue I ran into? EDIT 0 Further to Belisama's comment, I have amended my question. EDIT 1 As requested, I have attached a screenshot

  Read the article

• Suggestions for html tag info required for jQuery Plugin

  - by Toby Allen

  I have written a tiny bit of jQuery which simply selects all the Select form elements on the page and sets the selected property to the correct value. Previously I had to write code to generate the Select in php and specify the Selected attribute for the option that was selected or do loads of if statements in my php page or smarty template. Obviosly the information about what option is selected still needs to be specified somewhere in the page so the jQuery code can select it. I decided to create a new attribute on the Select item <Select name="MySelect" SelectedOption="2"> <-- Custom Attr SelectedOption <option value="1">My Option 1 </option> <option value="2">My Option 2 </option> <-- this option will be selected when jquery code runs <option value="3">My Option 3 </option> <option value="4">My Option 4 </option> </Select> Does anyone see a problem with using a custom attribute to do this, is there a more accepted way, or a better jquery way?

  Read the article

• Bug with Set / Get Accessor in .Net 3.5

  - by MarkPearl

  I spent a few hours scratching my head on this one... So I thought I would blog about it in case someone else had the same headache. Assume you have a class, and you are wanting to use the INotifyPropertyChanged interface so that when you bind to an instance of the class, you get the magic sauce of binding to do you updates to the UI. Well, I had a special instance where I wanted one of the properties of the class to add some additional formatting to itself whenever someone changed its value (see the code below).   class Test: INotifyPropertyChanged {     private string_inputValue;     public stringInputValue     {         get        {             return_inputValue;         }         set        {             if(value!= _inputValue)             {                 _inputValue = value+ "Extra Stuff";                 NotifyPropertyChanged("InputValue");                     }         }     }     public eventPropertyChangedEventHandler PropertyChanged;     public voidNotifyPropertyChanged(stringinfo)     {         if(PropertyChanged != null)         {             PropertyChanged(this, newPropertyChangedEventArgs(info));         }     } }   Everything looked fine, but when I ran it in my WPF project, the textbox I was binding to would not update? I couldn’t understand it! I thought the code made sense, so why wasn’t it working? Eventually StackOverflow came to the rescue, where I was told that it was a bug in the .Net 3.5 Runtime and that a fix was scheduled in .Net 4 For those who have the same problem, here is the workaround… You need to put the NotifyPropertyChanged method on the application thread! public string InputValue { get { return _inputValue; } set { if (value != _inputValue) { _inputValue = value + "Extra Stuff"; // // React to the type of measurement // Application.Current.Dispatcher.BeginInvoke((Action)delegate { NotifyPropertyChanged("InputValue"); }); } } }

  Read the article

• Can I switch input methods while Caps Lock is being held down on Windows?

  - by Syzygy

  On my Linux computer, my keyboard switches from English to Serbian when I hold the Caps Lock key. For example, to write c all I have to do is hold Caps Lock, and press the key where c is on the Serbian keyboard (in this case, they key is ; on the English keyboard). When I release Caps Lock, the keyboard "switches back" to English, so that if I press ; I get ; as desired. Super useful. Please note that I know how to change the keyboard layout. I want to use Caps Lock as a modifier key to change the language only while being held down! Is there a way to replicate this behavior on Windows 7 or Windows 8?

  Read the article

• How to have other divs with a flash liquid layout that fits to the page?

  - by brybam

  Basically the majority of my content is flash based. I designed it using Flash Builder (Flex) and Its in a liquid layout, (everything is in percents) and if im JUST embedding the flash content it scales to the page fine, and i have the flash content set to have a padding of 50 px. I put a header div in fine with no problems, but I have 2 problems, the first being the footer div seems to cover up the buttom of the flash content in IE, but it looks just fine in chrome. How can I solve this? I'm using the stock embed code that Flex provides, I tried to edit the css style for the div which I think is #flashContent and give it a min width and min height but it didnt seem to work, actually anything I did to #flashContent didn't seem to do anything, maybe its not the div i need to be adding that attribute to... And my other problem is I dont even know where to start when it comes to placing a div thats 280width by 600height colum to the right side of the flash content. If i could specify a size for the flash content, and the float it left, and float the colum right, and clear it with the container div id be just fine....But remember the flash content is set to 100% Scale (well techically 100%x80% because it looked better that way). Does anyone know how I can start to deal with creating a more complex scaleable flash layouts that includes other divs? ALL WELL MAINTAINING IE SUPPORT? IE is ruining my life. Here's the code I'm using: (or if it will help you visualize what im trying to do here's the page where im working on setting this up http://apumpkinpatch.com/textmashnew/) <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> <head> <title>TextMixup</title> <meta name="google" value="notranslate"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link href="css.css" rel="stylesheet" type="text/css" /> <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.5.2/jquery.min.js"></script> <script src="../appassets/scripts/jquery.titlealert.js"></script> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-19768131-2']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); function tabNotification() { $.titleAlert('New Message!', {interval:200,requireBlur:true,stopOnFocus:true}); } function joinNotification() { $.titleAlert('Joined Chat!', {interval:200,requireBlur:true,stopOnFocus:true}); } </script> <!-- BEGIN Browser History required section --> <link rel="stylesheet" type="text/css" href="history/history.css" /> <script type="text/javascript" src="history/history.js"></script> <!-- END Browser History required section --> <script type="text/javascript" src="swfobject.js"></script> <script type="text/javascript"> var swfVersionStr = "10.2.0"; var xiSwfUrlStr = "playerProductInstall.swf"; var flashvars = {}; var params = {}; params.quality = "high"; params.bgcolor = "#ffffff"; params.allowscriptaccess = "sameDomain"; params.allowfullscreen = "true"; var attributes = {}; attributes.id = "TextMixup"; attributes.name = "TextMixup"; attributes.align = "middle"; swfobject.embedSWF( "TextMixup.swf", "flashContent", "100%", "80%", swfVersionStr, xiSwfUrlStr, flashvars, params, attributes); swfobject.createCSS("#flashContent", "display:block;text-align:left;"); </script> </head> <body> <div id="homebar"><a href="http://apumpkinpatch.com"><img src="../appassets/images/logo/logoHor_130_30.png" alt="APumpkinPatch HOME" width="130" height="30" hspace="10" vspace="3" border="0"/></a> </div> <div id="topad"> <script type="text/javascript"><!-- google_ad_client = "pub-5824388356626461"; /* 728x90, textmash */ google_ad_slot = "1114351240"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> </div> <div id="mainContainer"> <div id="flashContent"> <p> To view this page ensure that Adobe Flash Player version 10.2.0 or greater is installed. </p> <script type="text/javascript"> var pageHost = ((document.location.protocol == "https:") ? "https://" : "http://"); document.write("<a href='http://www.adobe.com/go/getflashplayer'><img src='" + pageHost + "www.adobe.com/images/shared/download_buttons/get_flash_player.gif' alt='Get Adobe Flash player' /></a>" ); </script> </div> <noscript> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="100%" height="80%" id="TextMixup"> <param name="movie" value="TextMixup.swf" /> <param name="quality" value="high" /> <param name="bgcolor" value="#ffffff" /> <param name="allowScriptAccess" value="sameDomain" /> <param name="allowFullScreen" value="true" /> <!--[if !IE]>--> <object type="application/x-shockwave-flash" data="TextMixup.swf" width="100%" height="80%"> <param name="quality" value="high" /> <param name="bgcolor" value="#ffffff" /> <param name="allowScriptAccess" value="sameDomain" /> <param name="allowFullScreen" value="true" /> <!--<![endif]--> <!--[if gte IE 6]>--> <p> Either scripts and active content are not permitted to run or Adobe Flash Player version 10.2.0 or greater is not installed. </p> <!--<![endif]--> <a href="http://www.adobe.com/go/getflashplayer"> <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash Player" /> </a> <!--[if !IE]>--> </object> <!--<![endif]--> </object> </noscript> <div id="convosPreview">This is a div I would want to appear as a colum to the right of the flash content that can scale</div> <!---End mainContainer --> </div> <div id="footer"> <a href="../apps.html"><img src="../appassets/images/apps.png" hspace="5" vspace="5" alt="random chat app apumpkinpatch" width="228" height="40" border="0" /></a><a href="https://chrome.google.com/webstore/detail/hjmnobclpbhnjcpdnpdnkbgdkbfifbao?hl=en-US#"><img src="../appassets/images/chromeapp.png" alt="chrome app random video chat apumpkinpatch" width="115" height="40" vspace="5" border="0" /></a><br /><br /> <a href="http://spacebarup.com" target="_blank">©2011 Space Bar</a> | <a href="../tos.html">TOS & Privacy Policy</a> | <a href="../help.html">FAQ & Help</a> | <a href="../tips.html">Important online safety tips</a> | <a href="http://www.facebook.com/pages/APumpkinPatchcom/164279206963001?sk=app_2373072738" target="_blank">Discussion Boards</a><br /> <p>You must be at least 18 years of age to access this web site.<br />APumpkinPatch.com is not responsible for the actions of any visitors of this site.<br />APumpkinPatch.com does not endorse or claim ownership to any of the content that is broadcast through this site. </p><h2>A Pumpkin Patch is BRAND NEW and will be developed a lot over the next few months adding video chat games, chat rooms, and more! Check back often it's going to be a lot of fun!</h2> </div> </body> </html> myCSS: html, body { height:100%; } body { text-align:center; font-family: Helvetica, Arial, sans-serif; margin:0; padding:0; overflow:auto; text-align:center; background-color: #ffffff; } object:focus { outline:none; } #homebar { clear:both; text-align: left; width: 100%; height: 40px; background-color:#333333; color:#CCC; overflow:hidden; box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); -moz-box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); -webkit-box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); margin-bottom: 10px; } #mainContainer { height:auto; width:auto; clear:both; } #flashContent { display:none; height:auto; float:left; min-height: 500px; min-width: 340px; } /**this is the div i want to appear as a column net to the scaleable flash content **/ #convosPreview { float:right; width:280px; height:600px; }

  Read the article

• Ignoring GET parameters in Varnish VCL

  - by JamesHarrison

  Okay: I've got a site set up which has some APIs we expose to developers, which are in the format /api/item.xml?type_ids=34,35,37&region_ids=1000002,1000003&key=SOMERANDOMALPHANUM In this URI, type_ids is always set, region_ids and key are optional. The important thing to note is that the key variable does not affect the content of the response. It is used for internal tracking of requests so we can identify people who make slow or otherwise unwanted requests. In Varnish, we have a VCL like this: if (req.http.host ~ "the-site-in-question.com") { if (req.url ~ "^/api/.+\.xml") { unset req.http.cookie; } } We just strip cookies out and let the backend do the rest as far as times are concerned (this is a hackaround since Rails/authlogic sends session cookies with API responses). At present though, any distinct developers are basically hitting different caches since &key=SOMEALPHANUM is considered as part of the Varnish hash for storage. This is obviously not a great solution and I'm trying to work out how to tell Varnish to ignore that part of the URI.

  Read the article

• Equivalent of Windows 7 Winkey+Left / Winkey+Right for Window Tiling in OSX

  - by Koobz

  Windows 7 has a neat feature where the Windows Key in conjunction with the arrow keys tiles the active window. Windows key + left arrow moves it to the left half, windows key + right arrow moves your window to the right half of your monitor. Is there an equivalent to this functionality in OS X? Can anyone suggest some alternative metaphors by which to manage my windows? I find that OSX windows tend to be a bit more scatterbrained than their windows counterparts.

  Read the article

• Transferring a Windows 8 license and proper un- and reinstallation

  - by Kiwi

  Long story short I have two computers: a laptop and a desktop computer. Both have Windows 7 on them. I buy the Windows 8 Pro upgrade. To see if it screws up anything, I install it on my laptop as a guinea pig. I intend to use Windows 8 for my main computer, my desktop, but I want to test it on the laptop, so I know I don’t risk losing access to my desktop and the data on it. I never use my laptop, and only used it, because it already has a Windows 7 installation on it. The problem At some point, I must have entered the license key on my laptop, because when I go to the activation screen on my desktop, I get this: Uh-oh. I can’t use the key on my desktop. Now how the hell do I transfer the key from my laptop to my desktop computer? Answers and suggestions so far Let’s just say that I tried everything possible to get some answers on this matter. The best response I got from Microsoft is this: To install Windows 8 on your desktop, do the following: Uninstall Windows 8 on your laptop Afterwards, install Windows 8 on your desktop If it won’t activate, call product activation at (...) I am not a fan of that last point. The error message does allude to such a solution, however: If you’ve reinstalled Windows or made changes to your hardware recently, you may be able to use your current key. The question My main question is this: has anyone been in a similar situation, and if so, what did you do to resolve this? Failing that, what is the proper way to uninstall the Windows 8 installation on my laptop, and reinstall the Windows 8 installation on my desktop? Ad 1 I have already tried using the “reset” feature on my laptop, but that only resulted in a new Windows 8 installation that was already activated. But which is the right way to uninstall the installation in a way that allows me to use the license key on the desktop computer? Ad 2 Which is the proper way to reinstall the Windows 8 installation on my desktop computer? Why do I even have to reinstall it in the first place? I won’t get around to do this, until my USB key with 3.0 support arrives in the mail, but it is going to be a while, until I find a assuaging response to the best way to go about this anyway.

  Read the article

• Windows 7 Upgrade from an OEM disc

  - by user1026361

  I recently bought a new laptop with Windows 7 Home Premium and a Windows 7 Pro Upgrade key. It also comes with a cavalcade of bloatware. I would like to start with a fresh install of Windows. I understand that I can upgrade to W7Pro using the option in the Home Premium Start menu. However, I also own a Windows 7 Pro OEM installation disc from another computer. Can I use this Windows 7 Pro OEM disc to install Windows, and when it asks me for my key, provide the upgrade key purchased? Or am i required to install Home Premium first and then apply my upgrade key?

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #032

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Complete Series of Database Coding Standards and Guidelines SQL SERVER Database Coding Standards and Guidelines – Introduction SQL SERVER – Database Coding Standards and Guidelines – Part 1 SQL SERVER – Database Coding Standards and Guidelines – Part 2 SQL SERVER Database Coding Standards and Guidelines Complete List Download Explanation and Example – SELF JOIN When all of the data you require is contained within a single table, but data needed to extract is related to each other in the table itself. Examples of this type of data relate to Employee information, where the table may have both an Employee’s ID number for each record and also a field that displays the ID number of an Employee’s supervisor or manager. To retrieve the data tables are required to relate/join to itself. Insert Multiple Records Using One Insert Statement – Use of UNION ALL This is very interesting question I have received from new developer. How can I insert multiple values in table using only one insert? Now this is interesting question. When there are multiple records are to be inserted in the table following is the common way using T-SQL. Function to Display Current Week Date and Day – Weekly Calendar Straight blog post with script to find current week date and day based on the parameters passed in the function.  2008 In my beginning years, I have almost same confusion as many of the developer had in their earlier years. Here are two of the interesting question which I have attempted to answer in my early year. Even if you are experienced developer may be you will still like to read following two questions: Order Of Column In Index Order of Conditions in WHERE Clauses Example of DISTINCT in Aggregate Functions Have you ever used DISTINCT with the Aggregation Function? Here is a simple example about how users can do it. Create a Comma Delimited List Using SELECT Clause From Table Column Straight to script example where I explained how to do something easy and quickly. Compound Assignment Operators SQL SERVER 2008 has introduced new concept of Compound Assignment Operators. Compound Assignment Operators are available in many other programming languages for quite some time. Compound Assignment Operators is operator where variables are operated upon and assigned on the same line. PIVOT and UNPIVOT Table Examples Here is a very interesting question – the answer to the question can be YES or NO both. “If we PIVOT any table and UNPIVOT that table do we get our original table?” Read the blog post to get the explanation of the question above. 2009 What is Interim Table – Simple Definition of Interim Table The interim table is a table that is generated by joining two tables and not the final result table. In other words, when two tables are joined they create an interim table as resultset but the resultset is not final yet. It may be possible that more tables are about to join on the interim table, and more operations are still to be applied on that table (e.g. Order By, Having etc). Besides, it may be possible that there is no interim table; sometimes final table is what is generated when the query is run. 2010 Stored Procedure and Transactions If Stored Procedure is transactional then, it should roll back complete transactions when it encounters any errors. Well, that does not happen in this case, which proves that Stored Procedure does not only provide just the transactional feature to a batch of T-SQL. Generate Database Script for SQL Azure When talking about SQL Azure the most common complaint I hear is that the script generated from stand-along SQL Server database is not compatible with SQL Azure. This was true for some time for sure but not any more. If you have SQL Server 2008 R2 installed you can follow the guideline below to generate a script which is compatible with SQL Azure. Convert IN to EXISTS – Performance Talk It is NOT necessary that every time when IN is replaced by EXISTS it gives better performance. However, in our case listed above it does for sure give better performance. You can read about this subject in the associated blog post. Subquery or Join – Various Options – SQL Server Engine Knows the Best Every single time whenever there is a performance tuning exercise, I hear the conversation from developer where some prefer subquery and some prefer join. In this two part blog post, I explain the same in the detail with examples. Part 1 | Part 2 Merge Operations – Insert, Update, Delete in Single Execution MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. 2011 Puzzle – Statistics are not updated but are Created Once Here is the quick scenario about my setup. Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated – WHY? Question to You – When to use Function and When to use Stored Procedure Personally, I believe that they are both different things - they cannot be compared. I can say, it will be like comparing apples and oranges. Each has its own unique use. However, they can be used interchangeably at many times and in real life (i.e., production environment). I have personally seen both of these being used interchangeably many times. This is the precise reason for asking this question. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Guess the Next Value – Puzzle 4 Simple Example to Configure Resource Governor – Introduction to Resource Governor Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 – Video  Retrieves unnecessary columns and increases network traffic When a new columns are added views needs to be refreshed manually Leads to usage of sub-optimal execution plan Uses clustered index in most of the cases instead of using optimal index It is difficult to debug SQL SERVER – Load Generator – Free Tool From CodePlex The best part of this SQL Server Load Generator is that users can run multiple simultaneous queries again SQL Server using different login account and different application name. The interface of the tool is extremely easy to use and very intuitive as well. A Puzzle – Swap Value of Column Without Case Statement Let us assume there is a single column in the table called Gender. The challenge is to write a single update statement which will flip or swap the value in the column. For example if the value in the gender column is ‘male’ swap it with ‘female’ and if the value is ‘female’ swap it with ‘male’. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• How do I fix a custom Event Viewer Log that merges automatically with the Application log?

  - by NightOwl888

  I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

  Read the article

• Posting to Facebook Page using C# SDK from "offline" app

  - by James Crowley

  If you want to post to a facebook page using the Facebook Graph API and the Facebook C# SDK, from an "offline" app, there's a few steps you should be aware of. First, you need to get an access token that your windows service or app can permanently use. You can get this by visiting the following url (all on one line), replacing [ApiKey] with your applications Facebook API key. http://www.facebook.com/login.php?api_key=[ApiKey]&connect_display=popup&v=1.0 &next=http://www.facebook.com/connect/login_success.html&cancel_url=http://www.facebook.com/connect/login_failure.html &fbconnect=true&return_session=true&req_perms=publish_stream,offline_access,manage_pages&return_session=1 &sdk=joey&session_version=3 In the parameters of the URL you get redirected to, this will give you an access key. Note however, that this only gives you an access key to post to your own profile page. Next, you need to get a separate access key to post to the specific page you want to access. To do this, go to https://graph.facebook.com/[YourUserId]/accounts?access_token=[AccessTokenFromAbove] You can find your user id in the URL when you click on your profile image. On this page, you will then see a list of page IDs and corresponding access tokens for each facebook page. Using the appropriate pair, you can then use code like this: var app = new Facebook.FacebookApp(_accessToken); var parameters = new Dictionary { { "message" , promotionInfo.TagLine }, { "name" , promotionInfo.Title }, { "description" , promotionInfo.Description }, { "picture", promotionInfo.ImageUrl.ToString() }, { "caption" , promotionInfo.TargetUrl.Host }, { "link" , promotionInfo.TargetUrl.ToString() }, { "type" , "link" }, }; app.Post(_targetId + "/feed", parameters); And you're done!

  Read the article

• Oracle VM Templates Enable Oracle Real Application Clusters Deployment Up to 10 Times Faster than VMware vSphere

  - by Angela Poth

  Oracle VM - Quantifying the Value of Application-Driven DeploymentThe recently published report by the Evaluator Group, “Oracle VM – Quantifying The Value of Application-Driven Virtualization,“ validates Oracle’s ease of use and time savings over VMware vSphere 5. The report found that users can deploy Oracle Real Application Clusters up to 10 times faster with Oracle VM templates than VMware vSphere. Using Oracle VM templates users can deploy E-Business Suites nearly 7 times faster than VMware vSphere."Oracle VM’s application-driven architecture was built to enable rapid deployment of enterprise applications, with simplified integrated lifecycle management, to fully support Oracle applications. Our testing has demonstrated 90 percent improvement deploying Oracle Real Application Clusters 11g R2 using Oracle VM Templates and a similar improvement of 85 percent for the Oracle E-Business Suite 12.1.1. This clearly shows that Templates can provide real value to customers and should become an essential component for enabling rapid enterprise application deployment and management," said Leah Schoeb, Senior Partner, Evaluator Group.Read the Press Release Get a copy of the Evaluator Group Report: Oracle VM – Quantifying The Value of Application-Driven Virtualization

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >