Search Results

Search found 12183 results on 488 pages for 'general news'.

Page 385/488 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• ????????????????? Oracle Solaris ??? - Solaris 11 ????(??)

  - by kazun

  ???????????????? OS ????????????????????? 20 ??????????????????? Solaris?????????????????????? OS????????????????????????Solaris ???????????????????? ??????Oracle Solaris ??????????????6??????????????????Oracle Solaris ?????????????????????? [????????????] ?????(????????????? ???)?????(??????????????)?????(??????????????)?????(????????)???? ?(?????????????????)?????(???????????)(50??) Solaris????? ??: Solaris ??????????????????????????????????????Solaris ??Solaris ???????????????????????????? 10 ??? Solaris ?????????????????????? OS ?????????????????????????????????????????????????????????????? OS ???? Solaris ?????? ??: Solaris ????????????????????????????OS?????????????????????????????????????????????????????????????????????????????????? ???: ??????????????????????? 15 ??????????????????????????????????????????? Solaris ???????????????????????????????????????????????????????????5 ???10 ??????????????????????????? Solaris ???????????? ??: ??? Solaris ????????????????????????????????????????????????????????????????????????????????????????????? OS ?????????????????????????????????????????????????????????????????????????????????????????????? ??: ??????? OS ?????????????????????????????????????????????????????????????????????????DTrace ????????????????????????????? Solaris ???????? ???: 1980 ?????Sun ???????OS???????????????????????????????????????????????????????????????????????????????? ?Solaris ????1988?????Sun ? AT&T ? System V Release 4.0 ?????????????Sun ????????? System V Release 4.0 ?????????? Unix OS ??? SunOS 5.0(?? 1992 ????????? Solaris 2.0)???????????????????? SMP ?????????????????????????????????????????????????????Solaris 2.0 ?????????????? OS ????????(?)???????????????????????????????? 2.1, 2.2, 2.3 ??????????? 2.0 ????????????????? ??: Solaris ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????OS?????????? ??: ????????????????????????? ???: ????????????????? OS ??????????? x86 ? SPARC ? 2 ???????????????????????????????????????????????????????????????????????????????????????????????? CPU ????????????????????????????????????????????????????????????????????????????????? Solaris ??? ????? ?? Solaris 2.0 - 2.1 AT&T ? UNIX System V Release 4 ??????????????SMP/?????????????????API ????? SunOS 5.0 ????????Solaris 2.0 ????x86 ?? SPARC ?? Solaris 2.1 ?????????????????????????????? Solaris 2.2 - 2.4 - ???????? (SVR4 ??) - ???????????(2.5.1 ?? PowerPC ?????????) - 2.4 ?? x86 ?????????????????? Solaris 2.6?Solaris 7(2.7 ??????) 64 bit ??(Itanium ?????) Solaris 8 - 9 ?????????? Solaris 10 - 11 ??????????????????(OS ????????????????) Solaris??????? ??: ?????????????????????????????????????????Solaris ?????????????????????????????????????????????????????????????????? ??: ?????????????????? OS ???????????Solaris 2.3 ???????????????????????????????????????????????????????????????????????????????????????????????????? ???: ???????????????????????????????????????????????????????????????????????????????????? OS ????????????? Solaris ??????? ??: ??????????????????????????????????????????????????????????????????????????????????????????????????? ??: ??????????????????????????????????????????????????????????????????????????DTrace ?????????????????????????????????? ??: ????Solaris ? UNIX ????????????????????????????????????? OS ??????????????????????????????????????????????????????????????????????????????????????????????????????????????? Solaris ????????????????????????????????????????????????? OS ??????????????????? Solaris ???????? ??: ??????????????????????????1?? OS ?????????????? OS ??????????????????????????????????????Solaris ????? 1 ?? Solaris ??????????????????OS????????????????? ???: Legacy Container ????????????? Solaris(Solaris 8?Solaris 9) ???????????? ??: Solaris 10 ?????? SMF(Service Management Facility) ??????????????????????????????????????????????????????????????????????????????????????? ??: SMF?FMA (Fault Management Architecture)?????????????????????????????? Solaris ?????????????????????????? ???: ????????????????????????? ??: ?????????????????????1???????????????????????????????????????? Sun ??????????The Network Is The Computer???? ??: ??????Solaris 10 ?????????????????????????????????????????????????????????????????????????????? Solaris?????? ??: Solaris ?????????????????????Sun ?????????????(? 20 ??)??????????????????????????????????????????????????????????????????????????????????????????????????????????????????Sun ????????????????????????????????????????????????????????Sun ?????????????????????????????????????????????????????????????????????????? ???: Solaris ????? SunOS ????????????????????????? OS ??????? ??: ??????????????????????????????Sun ???????????????????????????????????????????????????????????? ??: 1990 ??????????????????? Solaris ???????? ???: ?????X Windows ???? Sun ??????????NeWS??????????????????????????????X Windows ??????????????????????????????????????? Sun ? Solaris ???????????????????????? ??: ???????Solaris ??????????????? OS ??????????????????????????????????????????????????????????????????????????????????????? ??: ????????????????????? Solaris ????????????ZFS ???????????????????????????????? ??: ????? OS ??????? Solaris ??????(???)??????????????? ???: Solaris ???????????????????? Solaris??????Solaris 2.0 ???? 2 ??? 1 ??????????????(?????????)??????Solaris ? 2 ??????????????????????????????????????? 2 ????????????????????????????2 ??? 1 ????????????????????????????????????????????????????????????? ????OS???????????? ???: Solaris ?????? Solaris ????????????OS ??????????????????????????????????????????????????????????????????????????????? ??: ??????????????????????????????????????????????(?)?????????????????????????????????????????????15 ?????????????????????????????????????????????????????????????????????????? ??: Solaris ??????? Solaris ????????????????????????????????????????????????????????? ??: ????????????????????????????????????????????????Solaris ??????????????????????????? ???: ??????????????Solaris ????????????????????????????????????????????????????????????????????????????????????? Solaris ?????????? ??: Solaris ???????????????????????????????????????????????????? ??: ????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???: 1994 ?????????????????????????????????????? ??: ??????????????????????????Solaris ????????????????????????????????????? ???: ???????????????? ??: ???Solaris ?????? 2 ?????????????????????????????????????? Solaris ?????????????????????????????????????????????????????????????????????????????????????????????OS?????????????????????????????????????????????????????Solaris ???????????? ??????Oracle Solaris ????????????6??????????????????Oracle Solaris ??????????????????????

  Read the article

• MailEnable - Configuring TLS for secure SMTP (Gmail)

  - by Buckers

  I have the latest version of MailEnable Pro installed on a new server that I'm setting up. Sending & receiving works fine with a new email account that I have set up, however I am now trying to configure GMail to use the mailserver for outgoing SMTP. I've done the following so far: Creating a self-cert SSL certficiate Ticked "Enable TLS" on the General tab of the SMTP connector properties Ticked "Send using TLS if remote server supports it" on the Outbound tab of the SMTP connector properties Selected the new self-cert SSL certificate on the SSL tab of the localhost server properties. Given permissions to IME_System on the new certificate However, Gmail is still giving me the following error: Authentication failed. Please check your username/password. [Server response: 454 TLS not available due to temporary reason code(454) ] I'm trying to connect on port 25, (someone told me you can still do this and you dont have to connect on 465). Is this right? Or do I need to tell MailEnable to use port 465? Am I missing something? Thanks, Chris.

  Read the article

• Want to use something like Citrix XenClient, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenClient would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenClient to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily push a new VM onto the client for easy updating. - Be able to keep files in sync (but that might be a samba / active directory's job) Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• Outlook 2007 unable to connect to exchange server

  - by mattwarren

  I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

  Read the article

• Occasional disk I/O errors in SQLite

  - by Alix Axel

  I have a very simple website running PHP and SQLite 3.7.9 (with PDO). After establishing the SQLite connection I immediately execute the following queries: PRAGMA busy_timeout=0; PRAGMA cache_size=8192; PRAGMA foreign_keys=ON; PRAGMA journal_size_limit=67110000; PRAGMA legacy_file_format=OFF; PRAGMA page_size=4096; PRAGMA recursive_triggers=ON; PRAGMA secure_delete=ON; PRAGMA synchronous=NORMAL; PRAGMA temp_store=MEMORY; PRAGMA journal_mode=WAL; PRAGMA wal_autocheckpoint=4096; This website only has one writer and a few occasional readers, so I don't expect any concurrency problems (and I'm even using WAL). Every couple of days, I've seen this error being reported by PHP: Fatal error: Uncaught exception 'PDOException' with message 'SQLSTATE[HY000]: General error: 10 disk I/O error' in ... Stack trace: #0 ...: PDO-exec('PRAGMA cache_si...') There are several things that make this error very weird to me: it's not a transient problem - no matter how many times I refresh the page, it won't go away the database file is not corrupted - the sqlite3 executable can open the database without problems If the following pragmas are commented out, PHP stops throwing the disk I/O exception: PRAGMA cache_size=8192; PRAGMA synchronous=NORMAL; PRAGMA journal_mode=WAL; Then, after successfully reconnecting to the database, I'm able to reintroduce these pragmas and the code with run smoothly for days - until eventually, the same error will occur without any apparent reason. I wasn't able to reproduce this error so far, so I'm clueless about the origin of it. I'm really curious what may be causing this problem... Any ideas? Environment: Ubuntu Server 12.04 LTS PHP 5.4.15 SQLite 3.7.9 Database size: ? 10MiB Transaction (write) size: ? 1KiB EDIT: Might these symptoms have something to do with busy_timeout?

  Read the article

• Configuring external SMTP server on Azure VM - messages staying in queue

  - by Steph Locke

  I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

  Read the article

• HA Proxy Stick-table and tcp-connection configuration

  - by Vladimir

  I am using HA Proxy HA-Proxy version 1.4.18 2011/09/16 I am trying to insert the following into /etc/init.d/haproxy.cfg file # Use General Purpose Couter (gpc) 0 in SC1 as a global abuse counter # Monitors the number of request sent by an IP over a period of 10 seconds stick-table type ip size 1m expire 10s store gpc0,http_req_rate(10s) tcp-request connection track-sc1 src tcp-request connection reject if { src_get_gpc0 gt 0 } # Table definition stick-table type ip size 100k expire 30s store conn_cur(3s) # Allow clean known IPs to bypass the filter tcp-request connection accept if { src -f /etc/haproxy/whitelist.lst } # Shut the new connection as long as the client has already 10 opened tcp-request connection reject if { src_conn_cur ge 10 } tcp-request connection track-sc1 src I get the following error: [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:36] : stick-table: unknown argument 'store'. [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:37] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:38] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:41] : stick-table: unknown argument 'store'. [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:43] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:45] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : parsing [/etc/haproxy/haproxy.cfg:46] : unknown argument 'connection' after 'tcp-request' in proxy 'http_proxy' [ALERT] 256/113143 (4627) : Error(s) found in configuration file : /etc/haproxy/haproxy.cfg [WARNING] 256/113143 (4627) : Proxy 'http_proxy': in multi-process mode, stats will be limited to process assigned to the current request. [ALERT] 256/113143 (4627) : Fatal errors found in configuration. [fail] Could you please tell me what is wrong with the code? Thanks!

  Read the article

• BSOD Dump - EXCEPTION_DOUBLE_FAULT - ON Windows 2008 Server 64bit

  - by Mark K

  Hello, my windows 2008 server (datacenter ed) 64bit , have recently created a series of BSOD on a different applications. the error message is in general EXCEPTION_DOUBLE_FAULT. Can anyone please help with the analysis of the dump file bellow- Best regards, Mark 2: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff800018b1678 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP PROCESS_NAME: CustomerService. CURRENT_IRQL: 1 EXCEPTION_RECORD: fffffa6004e45568 -- (.exr 0xfffffa6004e45568) ExceptionAddress: fffff800018a0150 (nt!RtlVirtualUnwind+0x0000000000000250) ExceptionCode: 10000004 ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000000000d8 TRAP_FRAME: fffffa6004e45610 -- (.trap 0xfffffa6004e45610) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000050 rbx=0000000000000000 rcx=0000000000000004 rdx=00000000000000d8 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800018a0150 rsp=fffffa6004e457a0 rbp=fffffa6004e459e0 r8=0000000000000006 r9=fffff8000181e000 r10=ffffffffffffff88 r11=fffff80001a1c000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!RtlVirtualUnwind+0x250: fffff800018a0150 488b02 mov rax,qword ptr [rdx] ds:00000000000000d8=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800018781ee to fffff80001878450 STACK_TEXT: fffffa6001768a68 fffff800018781ee : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffffa6001768a70 fffff80001876a38 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x6e fffffa6001768bb0 fffff800018b1678 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb8 fffffa6004e44e30 fffff800018782a9 : fffffa6004e45568 0000000000000001 fffffa6004e45610 000000000000023b : nt!KiDispatchException+0x34 fffffa6004e45430 fffff800018770a5 : 0000000000000000 0000000000000000 0000000000000000 0000000000000001 : nt!KiExceptionDispatch+0xa9 fffffa6004e45610 fffff800018a0150 : fffffa6004e46638 fffffa6004e46010 fffff80001965190 fffff8000181e000 : nt!KiPageFault+0x1e5 fffffa6004e457a0 fffff800018a3f78 : fffffa6000000001 0000000000000000 0000000000000000 ffffffffffffff88 : nt!RtlVirtualUnwind+0x250 fffffa6004e45810 fffff800018b1706 : fffffa6004e46638 fffffa6004e46010 fffffa6000000000 0000000000000000 : nt!RtlDispatchException+0x118 fffffa6004e45f00 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDispatchException+0xc2 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b8 fffff800`01876a38 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4a7801eb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 Followup: MachineOwner

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel.

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• Lenovo Mini Wireless Keyboard N5901: Remap orange "My Computer" button

  - by Jon Schneider

  I have a Lenovo Mini Wireless Keyboard N5901 (a.k.a. Part No. 57Y6336) that I'm using with an HTPC running Windows 7. The remote comes with an orange button in the top-left corner that by default, when pressed, opens the Windows "My Computer" window. I would like to remap / reprogram this button to act like the green "Windows Media Center" button instead on a Windows Media Center (WMC) remote; that is, open Windows Media Center if it isn't already open, or go to the WMC homepage if WMC is already open. I've tried several keyboard-remapping utilities (as recommended in other, more general "how to remap keyboard key?" SuperUser.com questions) including SharpKeys, Key Mapper, and KeyTweak, with no luck so far. None of these utilities recognize the orange button -- they all do recognize that some key was pressed, but display a value for the key of "unsupported" or something similar. I was able to use a utility called Keyboard Scan Code Generator to determine that a press of the orange button has a KeyData value of 16777217 (0x1000001), and a "Virtual Code" value of 182. (The other "media" buttons on the N5901 have the same KeyData value, but different Virtual Code values). I'm not sure at this point where in Windows this keystroke is being interpreted as a command to open "My Computer." There is no special software / driver for this device; it worked out of the box with Windows 7, no special driver install necessary. Is there any way to accomplish this? Thanks in advance for any suggestions!

  Read the article

• Over 200 active requests like "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)"

  - by Stefan Lasiewski

  Some details: Webserver: Apache/2.2.13 (FreeBSD) mod_ssl/2.2.13 OpenSSL/0.9.8e OS: FreeBSD 7.2-RELEASE This is a FreeBSD Jail. I believe I use the Apache 'prefork' MPM (I run the default for FreeBSD). I use the default values for MaxClients (256) I have enabled mod_status, with "ExtendedStatus On". When I view /server-status , I see a handful of regular requests. I also see over 230 requests from the 'localhost', like these: 37-0 - 0/0/1 . 0.00 1510 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 38-0 - 0/0/1 . 0.00 1509 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 39-0 - 0/0/3 . 0.00 1482 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 40-0 - 0/0/6 . 0.00 1445 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 I also see about 2417 requests yesterday from the localhost, like these: Apr 14 11:16:40 192.168.16.127 httpd[431]: www.example.gov 127.0.0.2 - - [15/Apr/2010:11:16:40 -0700] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The page at http://wiki.apache.org/httpd/InternalDummyConnection says "These requests are perfectly normal and you do not, in general, need to worry about them", but I'm not so sure. Why are there over 230 of these? Are these active connections? If I have "MaxClients 256", and over 230 of these connections, it seems that my webserver is dangerously close to running out of available connections. It also seems like Apache should only need a handful of these "internal dummy connections" We actually had two unexplained outages last night, and I am wondering if these "internal dummy connection" caused us to run out of available connections.

  Read the article

• Where can I ask questions that aren't IT questions?

  - by Adam Davis

  Thank you for your confidence in our abilities But have you read this? FAQ We get a lot of interesting technical questions on here, but Server Fault is meant to be first and foremost a resource for system administrators and IT professionals. In other words, Server Fault isn't meant to cater to every computer problem - just those that only exist in or can best be solved in the IT and sysadmin domain Yes, someone here might be able to help you, but you'll find that other forums more focused on your topic can give you a much better answer than a bunch of IT professionals. It's likely that your question will be downvoted, closed, and in some cases marked "offensive." It's not that we hate you, it's just that we like to keep our corn pops separate from our cocoa puffs. In that vein, here are a bunch of other forums where you can get help: (This list contains the top two forums for each category as voted for below.) Programming Stackoverflow Consumer Level Computer Hardware Ars Technica OpenForum Tom's Hardware Forums Computer Software Anandtech Forum Web Design/Hosting/CMS SitePoint Forums Web Hosting Talk Math, Science, Engineering Physics Forums PlanetMath Other/General Ask Metafilter Google Search Mahalo Answers Check out the answers below for even more suggestions! What forums can people go to to ask the questions that are off topic here? Please list only ONE forum per answer so votes can bring the best forums to the top. Return to FAQ Index

  Read the article

• Inkscape: what are "line" objects?

  - by Peter Mortensen

  What is a "line" object in Inkscape? Drawing lines in Inkscape is by using the tool "Draw Bezier curves and straight lines (Shift+F6)". This creates objects of another type, "path". Using Inkscape: is there a way to convert an object of type "line" into an object of the more general type "path"? I have imported a drawing (mostly lines, rectangles and text) that has been through Adobe Illustrator: originally made in Inkscape, imported into Illustrator, edited, saved from Illustrator as SVG, imported into Inkscape. Sample from the imported SVG file: <path id="path5855" stroke="#000000" d=" M320.198,275.935" /> <line fill="none" stroke="#000000" x1="348.553" y1="45.097" x2="348.553" y2="185.346" id="line3368" /> Update 1: I have inspected the original XML (SVG) file from 2006 and it does not contain any "line" XML tags. Thus it must be a crime of Adobe Illustrator. When a line is selected in this imported SVG file the bottom panel displays: "Line in root. Click selection to toggle scale/rotation handles.". When a line is selected that was drawn in Inkscape the bottom panel displays: "Path (2 nodes) in Layer 1. Click selection to toggle scale/rotation handles." What is the difference between "line" and "path"? Is "line" some kind of read-only/non-editable object? A generic term like "line" is not easy to use in search, but I have now found the definitions for "line" and "path": SVG line: http://www.w3schools.com/svg/svg_line.asp SVG path: http://www.w3schools.com/svg/svg_path.asp Platform: Inkscape v0.46 (2008-03-10), Windows XP 64 bit, 8 GB RAM.

  Read the article

• phpMyAdmin: The additional features for working with linked tables have been deactivated.

  - by The Disintegrator

  I'm getting this error in the main page of phpMyAdmin verson: 3.2.1deb1 The additional features for working with linked tables have been deactivated. To find out why click here. When I click the link I get this report. $cfg['Servers'][$i]['pmadb'] ... OK $cfg['Servers'][$i]['relation'] ... not OK [ Documentation ] General relation features: Disabled $cfg['Servers'][$i]['table_info'] ... not OK [ Documentation ] Display Features: Disabled $cfg['Servers'][$i]['table_coords'] ... not OK [ Documentation ] $cfg['Servers'][$i]['pdf_pages'] ... not OK [ Documentation ] Creation of PDFs: Disabled $cfg['Servers'][$i]['column_info'] ... not OK [ Documentation ] Displaying Column Comments: Disabled Bookmarked SQL query: Disabled Browser transformation: Disabled $cfg['Servers'][$i]['history'] ... not OK [ Documentation ] SQL history: Disabled $cfg['Servers'][$i]['designer_coords'] ... not OK [ Documentation ] Designer: Disabled I already used the script to create the tables. I assigned the permissions to the pma user. And everything is set in /etc/phpmyadmin/conf.inc.php But it's still not working... The tables are empty. I assume that they should have something. I'm interested in the relations an history features. Obviously I have read the documentation. Maybe something else is unsetting those values? Any toughs?

  Read the article

• Gnome-Applets Package Causing Gnome to Segfault

  - by FranticPedantic

  When I boot ubuntu I get a bunch of windows saying "The panel encountered a problem while loading: OAFIID:GNOME_ShowDesktopApplet", with a bunch of others(5) besides ShowDesktopApplet. I am able to launch a terminal, and I do have the taskbar at the top, although the bar at the bottom that holds the windows is blank, so when I minimize a window it disappears. Furthermore, when I try to launch most applications (firefox for example) it segfaults. I have googled the error but it seems to be common but general issue, and a lot of the solutions that worked for others didn't work for me. I tried deleting the gconf, gnome, and gnome2 folders in my home directory. I tried deleting a bunch of the gnome folders (although I might have done this wrong, I was confused as to which ones). I have also tried to use apt-get and dpkg to re-install ubuntu-desktop and gnome-applets. However, when I try apt-get install ubuntu-desktop I get errors regarding /var/cache/apt/archives/gnome-applets_2.28.0-0ubunt2_amd64.deb I tried dpkg --configure -a and interestingly I get Package gnome-applets is not installed. When I try to use apt-get to install it, that same pesky problem pops up error processing /var/cache/apt/archives/gnome-applets_2.28.0-0ubunt2_amd64.deb (--unpack) subprocess new post-removal script returned error exist status 245 sub process /usr/bin/dpkg returned an error code(1) This file has been popping up with regards to a lot of the solutions suggested I see. Any ideas?

  Read the article

• Windows Clients: Windows or Linux Domain Controller?

  - by Ramon Marco Navarro

  I'm planning to set up a domain controller for our small computer laboratory. I'm a little confused as to what operating system to use for our domain controller. What's in the lab: The lab has 25 units running a mix of Windows 7 and Windows XP. The domain controller will only have 2GB of RAM running a C2D E7200. (Is this enough?) What we want: The Domain Controller will also be running a git server. The Domain Controller will also be used as a general development machine (mostly Java, PHP). A way to centralize the updates for the windows clients, so that they won't have to download the same patches from the remote site. The machines would just query them from the local domain controller and get the updates from there. Our head recommended that I virtualize a Windows Server 2008 system under a Linux host and use the former as a domain controller and the latter for development or the other way around. A comparison of the advantages and disadvantages of using a Linux distribution or Windows Server 2008 in this situation would also be appreciated. As you may have noticed by now, I'm kinda new to setting up a domain so I hope you guys will be able to help me. Thank you.

  Read the article

• Server 2008 R2 Dns Lockup

  - by Richard Maynard

  Hi, We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed Thanks in advance. Regards,

  Read the article

• MS Access 2003 - Format a Number with Commas AND Auto-Decimal

  - by Emtucifor

  On a report I have a control which is bound to a column which can have up to 3 decimal places. I want the number to format with commas separating thousands and millions, but I also want the number of decimal places to be automatic, so that if there is no decimal portion then no decimal at all is shown. 1234.567 -> 1,234.567 1234.560 -> 1,234.56 1234.500 -> 1,234.5 1234.000 -> 1,234 General format will give me the auto decimal places but no commas. Standard format gives the comma but is fixed to 2 decimal places. Doing my own =Format(Number, "#,##0.#") leaves the decimal point in and doesn't align properly, with extra space on the right of the number. Do I have to write my own VB function to give the format I want? It seems silly that Access (apparently) can't do this out of the box. This also seems really horrible: =Replace(Replace(Replace(Replace(Replace( _ Format(Number, "#,##0.000") & "x", "0x", ""), "0x", ""), "0x, ""), ".x", ""), "x", "")

  Read the article

• CloneZilla PXE Boot Without NFS

  - by John

  I am trying to setup CloneZilla to be bootable via PXE without using NFS. I do not have NFS running on our PXE server and would like to keep it that way. However, most of the information that I have found online indicates that you need to setup NFS in order to PXE boot CloneZilla. I believe that I am pretty close in getting it to work, but am not sure where to go next. Listed below are the different PXE menu option configurations that I have used so far. LABEL Clonezilla Live MENU LABEL Clonezilla Live KERNEL utilities/clonezilla/vmlinuz APPEND initrd=utilities/clonezilla/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" o$ I have also tried the following append lines, without success: APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=tftp://10.130.155.23/filesystem.squashfs APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=normal nomodeset nosplash fetch=tftp://10.130.155.23/filesystem.squashfs Each of them have resulted in a no go with the following error: "Unable to find a live file system on the network". It looks like it gets to the point of trying to load the filesystem.squashfs file, hangs, and then throws the error. Any help would be greatly appreciated.

  Read the article

• Problem removing US keyboard layout from input languages

  - by Nazariy

  I'm working on English (UK) version of Windows 7, my second input language is Russian. Since installation of Windows I have removed US keyboard layout and set LEFT ALT+SHIFT as input switcher. Everything was fine until now. Recently I noticed that my switch combination does not always work. I opened language select bar and found there English (US) keyboard layout. I went to settings and found that in General Tab there is only two languages available, US was not listed. I decided to add US layout manually and remove it after. This operation went as expected, US layout disappeared from language bar. But after few hours it appeared again. I started "googling" and found that I'm not alone. On Microsoft forum I found suggestion to remove US layout as I did before and than copy all settings to all profiles. It's look like some service are adding US layout on it's own, but I have no idea which one. Does any one know how to fix this issue?

  Read the article

• lighttpd: Backend is overloaded + fcgi-server re-enabled + all handlers are down

  - by AbuZubair

  We have a standard lighttpd deployment with PHP-CGI and our error logs are flooding with the following. This is causing a huge problem because we keep returning 500's to our clients: 2012-10-14 14:28:38: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 36 2012-10-14 14:28:38: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:39: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:40: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 37 2012-10-14 14:28:40: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:42: (mod_fastcgi.c.3597) all handlers for /index.php? on .php are down. Does anyone have any clue as to what is going on? We restarted all php and lighttpd related processes and that didn't fix the problem. We ended up rebooting the whole box and now its gone away, although we fear it may come back later.... In general our deployment has been doing fine for a long time and this is the first time this has happened.

  Read the article

• Experiences with BIRD for BGP?

  - by Shtééf

  We're currently using Quagga with Debian Linux to run a full table BGP router. The set-up has been dead simple up to now, but we've come to a point where I have to reconfigure the router quite a bit, and want to tighten things up. I've never really understood Quagga, and always found its documentation to be lacking. It appears to be mimicking Cisco, of which I only have basic understanding. BIRD has caught my eye recently. The couple of articles / presentations I found promote it as lightweight and more responsive under stress compared to Quagga. And it actually seems to have very decent documentation. So I'd like to know: Who's running BIRD right now, and in what kind of set-up? How is it stability-wise? I've read about it running in a couple of sites in production. Let's say I don't care at all for a Cisco-feel to configuration. How is configuration, maintainance, monitoring, etc. of BIRD in general? And any other notable experiences you may have with it.

  Read the article

• URL Rewriting on GoDaddy Virtual Server

  - by Aristotle

  I migrated a Kohana2 application from a shared-hosting environment over to a virtual dedicated server. After this migration, I can't seem to get my .htaccess file working again. I apologize up front, but over the years I have never experienced so much frustration with anything else as I do with the dreaded .htaccess file. Presently I have my project installed immediately within a directory in my public folder: /var/html/www/info.php (general information about server) /var/html/www/logo.jpg (some flat file) /var/html/www/somesite.com/[kohana site exists here] So my .htaccess file is within that directory, and has the following contents: # Turn on URL rewriting RewriteEngine On # Installation directory RewriteBase /somesite.com/ # Protect application and system files from being viewed # This is only necessary when these files are inside the webserver document root RewriteRule ^(application|modules|system) - [R=404,L] # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] # Alternativly, if the rewrite rule above does not work try this instead: #RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] This doesn't work. The initial controller is loaded, since index.php is called up implicitly when nothing else is in the url. But if I try to load up some other non-default controller, the site fails. If I place the index.php back within the url, the call to other controllers works just fine. I'm really at my wits end, and would appreciate some direction here.

  Read the article

• Antivirus Configuration for dedicated SQL and dedicated IIS Servers

  - by Wayne Arthurton

  Our corporate standard is McAfee Enterprise, unfortunately this is non-negotiable. On two types of servers I'm responsible for, SQL & Web, we have noticed major performance issues with the corporate standard setup. Max scan time 45sec One policy for all processes Scan ALL files on write, read and open for backup Heuristics: Find unknown programs, trojans and macros Detect unwanted programs Exclude: EVT, LDF, LOG, MDF, VMD, , windows file protection) This of course still causes major slowdowns. IIS .NET recompiles are slow especially with SharePoint, SQL backups and restores, SQL Analysis Services, Integration Services and temp data from them as well. I have looked from time to time, for some best practices on setting up McAfee of SQL & SQL Analysis Service, SQL Integration Service, Visual Studio, Sharepoint, and .NET web servers in general. How do people setup McAfee enterprise on their corporate serves keeping security intact, but affecting performance as minimally as possible? Has anyone run across white papers on these setups? Obviously some are case by case, but there must be some best practices out there somewhere.

  Read the article

• APC + FPM memory fragmentation without a reason

  - by palmic

  My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >