Search Results

Search found 21470 results on 859 pages for 'computer graphics'.

Page 39/859 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Should ATI catalyst be installed for sake of openCL?

    - by G Sree Teja Simha
    I have a HP Envy 4 1025tx with Hybrid graphics. Although this is a 64bit system, I've installed 32bit Ubuntu on it for some reasons.(Hybrid graphics don't do well with 64bit Ubuntu.-"Some one on some forum") I had heating problems with the GPU but I've fixed them all with vgaswitcheroo. But now I wanted to use my Blender on my Ubuntu. To my surprise Blender didn't detect the dedicated 7670m card in my machine. I've confirmed with cat /sys/kernel/debug/vgaswitcheroo/switch Both IGD and DIS were up and running. I dont seem to have libopencl on my /usr/lib even though my synaptic manager says that I have installed it. I'm not quite sure what I've installed. It says that I've installed "ocl-icd-libopencl1". So my question is... Do I have opencl on my system? If not do I have to get propreitary ATI drivers for sake of opencl(fglrx wrecks up my unity totally on my system I need directions to fix it if this is the choice)? Should I get a 64bit Ubuntu installed on this system?

    Read the article

  • Extension GLX missing...on a desktop PC

    - by Bart van Heukelom
    I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

    Read the article

  • Effect of using dedicated NVidia card instead of Intel HD4000

    - by Sman789
    Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

    Read the article

  • How to store bitmaps in memory?

    - by Geotarget
    I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

    Read the article

  • Ubuntu 11.10 not starting in Graphical mode?

    - by iammilind
    I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

    Read the article

  • Problem with installing Nvidia display drivers on Ubuntu 13.10

    - by Pascal
    Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

    Read the article

  • Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • Can T520+Bumblebee run an external monitor via DisplayPort?

    - by Fen
    Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

    Read the article

  • Ubuntu 3D does not work on Dell system with a AMD Radeon HD 6470M

    - by VeeKay
    I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

    Read the article

  • Recommended formats to store bitmaps in memory?

    - by Geotarget
    I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

    Read the article

  • Shader compile log depending on hardware

    - by dreta
    I'm done with the core of my graphics engine and I'm testing it on every platform I can get my hands on. Now, what I noticed is that different drivers return different shader and program compile log content. For example, on my friend's laptop if you successfuly compile a shader then the log is simply empty. However on my PC I get some useful information along with it. So if I compile a vertex shader, I'll get: Vertex shader was successfully compiled to run on hardware. Which isn't that impressive, but is what happens when I compile a program. On my friend's computer the log is empty, since the program compiles. However on my own computer I get: Vertex shader(s) linked, fragment shader(s) linked. Which is awesome, because I'm attaching a geometry shader with 0 (I have a geometry shader file with trash, so it doesn't compile and the pointer is set to 0), and the compiler just tells me which shaders linked. Now it got me thinking, if I was going to buy a graphics card, is there a way for me to get the information about whether or not I'll get this "extended" compile information? Maybe it's vendor specific? Now I don't expect an answer TBH, this seems a bit obscure, but maybe somebody has any experience with this and could post it.

    Read the article

  • Which powerful laptop, with UK keyboard and 8gb ram

    - by RobinL
    I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

    Read the article

  • Ubuntu 12.04 fresh install wont boot up

    - by user147220
    im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

    Read the article

  • Ubuntu 13.04 can only work in recovery mode

    - by zhangyangyu
    I have just updated my 12.10 to 13.04. Everything is updated. But I can only boot to a black screen. I mean after the GRUB interface and purple screen. And I can hear the voice of the password interface. But it is only the black screen. It all works OK in 12.10. But it can work in the recovery mode. I mean go into the recovery mode and choose resume. And then everything is OK. But when loading kernel, the screen is dirty. I don't know why and I have Googled a lot. But no resolutions works. My graphics card is Intel GMA HD 4000, tested as VESA: Intel® Sandybridge/Ivybridge Graphics. I have been trapped in this for a whole day. I do need help. Hope someone can help me. By the way, the kernel is 3.8.0-19 if it helps.

    Read the article

  • Cheap desktop computer in 19" rack-mountable form-factor?

    - by Alex Basson
    I'm a high school teacher at a small private school. As of this year, we have SMARTBoards in every classroom (though I've had one in the class I share for two years now). The classrooms themselves don't have computers in them, so we teachers bring our laptops to class and connect them to the boards. This has several disadvantages: This takes a few minutes while we wait for the board to boot up and then orient the board to our individual laptop -- we have to do this every time b/c different teachers have different laptops requiring different orientations. This isn't ideal because when you only have 43 minutes per class period, waiting five minutes just to get started is a real waste. Carrying your laptop to class doesn't sound so bad until you consider that we're also carrying textbooks and piles of student papers, and we're carrying it all through crowded high school hallways. More than one laptop has fallen THUNK to the floor, with dire consequences. We feel we could eliminate the need to use our laptops with the SMARTBoards if we had a dedicated computer in each classroom hooked up to the board at all times. Each board set-up is connected to a podium with a standard 19" rack in it, currently housing a power supply and DVD player. There're plenty of rack spaces available. So I'm thinking: maybe we could get some inexpensive computers in a 19" rack-mountable form factor, install them in the podiums, and connect them to the boards on a permanent basis. Any suggestions?

    Read the article

  • how to prevent other computers from seeing our network computers through vpn

    - by Disco
    We have a local office domain consisting of Windows 7 and XP machines that is running on Windows Server 2008 R2. We also have users that connect via VPN into our network. My concern is that when a remote user opens up a folder, the Network section on the left side of the folder shows the remote user all the computer names in our local network. I would like to go about renaming our computers in the local network with more descriptive computer names, but I do not want the users off-site to be able to see these computer names by simply opening up a folder. (Granted, they can already do this, but our current naming scheme does not link computer names to users.) I would like to change our computer names so we can determine which computer belongs to which user more easily IF it can be done securely. How can I ensure that our local computer names are not showing up in the Network folder for remote, VPN-connected users? My online searches have turned up results where people are advised to turn off Network Sharing and Discovery, but that seems to only ensure that the local machine doesn't see other computer names. I want to prevent OUR computer names from showing up on OTHER computers, and I can't go into the VPN-connected computers and turn off THEIR Network Discovery settings. I would think there is a group policy that would control this but I have not found one yet and I don't know how I would apply it to VPN-connected computers. Thanks! EDIT: That's true, a Group Policy wouldn't run on users only connecting via VPN, good point. What about a VPN/router policy, then?

    Read the article

  • Very high-pitched noise when computer does something intense?

    - by Starkers
    "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

    Read the article

  • Superpower Your Touchpad Computer with Scrybe

    - by Matthew Guay
    Are you looking for a way to help your Touchpad computer make you more productive?  Here’s a quick look at Scrybe, a new application from Synaptics that lets you superpower it. Touchpad devices have become increasingly more interesting as they’ve included support for multi-touch gestures.  Scrybe takes it to the next level and lets you use your touchpad as an application launcher.  You can launch any application, website, or complete many common commands on your computer with a simple gesture.  Scrybe works with most modern Synaptics touchpads, which are standard on most laptops and netbooks.  It is optimized for newer multi-touch touchpads, but can also work with standard single-touch touchpads.  It works on Windows 7, Vista, and XP, so chances are it will work with your laptop or netbook. Get Started With Scrybe Head over to the Scrybe website and download the latest version (link below).  You are asked to enter your email address, name, and information about your computer…but you actually only have to enter your email address.  Click Download when finished. Run the installer when it’s download.  It will automatically download the latest Synaptics driver for your touchpad and any other components needed for Scrybe.  Note that the Scrybe installer will ask to install the Yahoo! toolbar, so uncheck this to avoid adding this worthless browser toolbar. Using Scrybe To open an application or website with a gesture, press 3 fingers on your touchpad at once, or if your touchpad doesn’t support multi-touch gestures, then press Ctrl+Alt and press 1 finger on your touchpad.  This will open the Scrype input pane; start drawing a gesture, and you’ll see it on the grey square.  The input pane shows some default gestures you can try. Here we drew an “M”, which opens our default Music player.  As soon as you finish the gesture and lift up your finger, Scrybe will open the application or website you selected. A notification balloon will let you know what gesture was preformed. When you’re entering your gesture, the input pane will show white “ink”.  The “ink” will turn blue if the command is recognized, but will turn red if it isn’t.  If Scrybe doesn’t recognize your command, press 3 fingers and try again. Scrybe Control Panel You can open the Scrybe Control panel to enter or change commands by entering a box-like gesture, or right-clicking the Scrybe icon in your system tray and selecting “Scrybe Control Panel”. Scrybe has many pre-configured gestures that you can preview and even practice. All of the gestures in the Popular tab are preset and cannot be changed.  However, the ones in the favorites tab can be edited.  Select the gesture you wish to edit, and click the gear icon to change it.  Here we changed the email gesture to open Hotmail instead of the default Yahoo Mail. Scrybe can also help you perform many common Windows commands such as Copy and Undo.  Select the Tools tab to see all of these commands.   Scrybe has many settings you may wish to change.  Select the Preferences button in the Control Panel to change these.  Here’s some of the settings we changed. Uncheck “Display a message” to turn off the tooltip notifications when you enter a gesture Uncheck “Show symbol hints” to turn off the sidebar on the input pane Select the search engine you want to open with the Search Gesture.  The default is Yahoo, but you can choose your favorite. Adding a new Scrybe Gesture The default Scrybe options are useful, but the best part is that you can assign gestures to your own programs or websites.  Open the Scrybe control panel, and click the plus sign on the bottom left corner.  Enter a name for your gesture, and then choose if it is for a website or an application. If you want the gesture to open a website, enter the address in the box. Alternately, if you want your gesture to open an application, select Launch Application and then either enter the path to the application, or click the button beside the Launch field and browse to it. Now click the down arrow on the blue box and choose one of the gestures for your application or website. Your new gesture will show up under the Favorites tab in the Scrybe control panel, and you can use it whenever you want from Scrybe, or practice the gesture by selecting the Practice button. Conclusion If you enjoy multi-touch gestures, you may find Scrybe very useful on your laptop or netbook.  Scrybe recognizes gestures fairly easily, even if you don’t enter them perfectly correctly.  Just like pinch-to-zoom and two-finger scroll, Scrybe can quickly become something you miss on other laptops. Download Scrybe (registration required) Similar Articles Productive Geek Tips Fixing Firefox Scrolling Problems with Dell Synaptics TouchpadRemove Synaptics Touchpad Icon from System TrayRoll Back Troublesome Device Drivers in Windows VistaChange Your Computer Name in Windows 7 or VistaLet Somebody Use Your Computer Without Logging Off in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Win32 and Win64 programming in C sources?

    - by Nick Rosencrantz
    I'm learning OpenGL with C and that makes me include the windows.h file in my project. I'd like to look at some more specific windows functions and I wonder if you can cite some good sources for learning the basics of Win32 and Win64 programming in C (or C++). I use MS Visual C++ and I prefer to stick with C even though much of the Windows API seems to be C++. I'd like my program to be portable and using some platform-indepedent graphics library like OpenGL I could make my program portable with some slight changes for window management. Could you direct me with some pointers to books or www links where I can find more info? I've already studied the OpenGL red book and the C programming language, what I'm looking for is the platform-dependent stuff and how to handle that since I run both Linux and Windows where I find the development environment Visual Studio is pretty good but the debugger gdb is not available on windows so it's a trade off which environment i'll choose in the end - Linux with gcc or Windows with MSVC. Here is the program that draws a graphics primitive with some use of windows.h This program is also runnable on Linux without changing the code that actually draws the graphics primitive: #include <windows.h> #include <gl/gl.h> LRESULT CALLBACK WindowProc(HWND, UINT, WPARAM, LPARAM); void EnableOpenGL(HWND hwnd, HDC*, HGLRC*); void DisableOpenGL(HWND, HDC, HGLRC); int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { WNDCLASSEX wcex; HWND hwnd; HDC hDC; HGLRC hRC; MSG msg; BOOL bQuit = FALSE; float theta = 0.0f; /* register window class */ wcex.cbSize = sizeof(WNDCLASSEX); wcex.style = CS_OWNDC; wcex.lpfnWndProc = WindowProc; wcex.cbClsExtra = 0; wcex.cbWndExtra = 0; wcex.hInstance = hInstance; wcex.hIcon = LoadIcon(NULL, IDI_APPLICATION); wcex.hCursor = LoadCursor(NULL, IDC_ARROW); wcex.hbrBackground = (HBRUSH)GetStockObject(BLACK_BRUSH); wcex.lpszMenuName = NULL; wcex.lpszClassName = "GLSample"; wcex.hIconSm = LoadIcon(NULL, IDI_APPLICATION);; if (!RegisterClassEx(&wcex)) return 0; /* create main window */ hwnd = CreateWindowEx(0, "GLSample", "OpenGL Sample", WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, 256, 256, NULL, NULL, hInstance, NULL); ShowWindow(hwnd, nCmdShow); /* enable OpenGL for the window */ EnableOpenGL(hwnd, &hDC, &hRC); /* program main loop */ while (!bQuit) { /* check for messages */ if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { /* handle or dispatch messages */ if (msg.message == WM_QUIT) { bQuit = TRUE; } else { TranslateMessage(&msg); DispatchMessage(&msg); } } else { /* OpenGL animation code goes here */ glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClear(GL_COLOR_BUFFER_BIT); glPushMatrix(); glRotatef(theta, 0.0f, 0.0f, 1.0f); glBegin(GL_TRIANGLES); glColor3f(1.0f, 0.0f, 0.0f); glVertex2f(0.0f, 1.0f); glColor3f(0.0f, 1.0f, 0.0f); glVertex2f(0.87f, -0.5f); glColor3f(0.0f, 0.0f, 1.0f); glVertex2f(-0.87f, -0.5f); glEnd(); glPopMatrix(); SwapBuffers(hDC); theta += 1.0f; Sleep (1); } } /* shutdown OpenGL */ DisableOpenGL(hwnd, hDC, hRC); /* destroy the window explicitly */ DestroyWindow(hwnd); return msg.wParam; } LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CLOSE: PostQuitMessage(0); break; case WM_DESTROY: return 0; case WM_KEYDOWN: { switch (wParam) { case VK_ESCAPE: PostQuitMessage(0); break; } } break; default: return DefWindowProc(hwnd, uMsg, wParam, lParam); } return 0; } void EnableOpenGL(HWND hwnd, HDC* hDC, HGLRC* hRC) { PIXELFORMATDESCRIPTOR pfd; int iFormat; /* get the device context (DC) */ *hDC = GetDC(hwnd); /* set the pixel format for the DC */ ZeroMemory(&pfd, sizeof(pfd)); pfd.nSize = sizeof(pfd); pfd.nVersion = 1; pfd.dwFlags = PFD_DRAW_TO_WINDOW | PFD_SUPPORT_OPENGL | PFD_DOUBLEBUFFER; pfd.iPixelType = PFD_TYPE_RGBA; pfd.cColorBits = 24; pfd.cDepthBits = 16; pfd.iLayerType = PFD_MAIN_PLANE; iFormat = ChoosePixelFormat(*hDC, &pfd); SetPixelFormat(*hDC, iFormat, &pfd); /* create and enable the render context (RC) */ *hRC = wglCreateContext(*hDC); wglMakeCurrent(*hDC, *hRC); } void DisableOpenGL (HWND hwnd, HDC hDC, HGLRC hRC) { wglMakeCurrent(NULL, NULL); wglDeleteContext(hRC); ReleaseDC(hwnd, hDC); }

    Read the article

  • OpenGL ES 2.0: Using VBOs?

    - by Bunkai.Satori
    OpenGL VBOs (vertex buffer objects) have been developed to improve performance of OpenGL (OpenGL ES 2.0 in my case). The logic is that with the help of VBOs, the data does not need to be copied from client memory to graphics card on per frame basis. However, as I see it, the game scene changes continuously: position of objects change, their scaling and rotating change, they get animated, they explode, they get spawn or disappear. In such highly dynamic environment, such as computer game scene is, what is the point of using VBOs, if the VBOs would need to be constructed on per-frame basis anyway? Can you please help me to understand how to practically take beneif of VBOs in computer games? Can there be more vertex based VBOs (say one per one object) or there must be always exactly only one VBO present for each draw cycle?

    Read the article

  • The Strange History of the Honeywell Kitchen Computer

    - by Jason Fitzpatrick
    In 1969 the Honeywell corporation released a $10,000 kitchen computer that weighed 100 pounds, was as big as a table, and required advanced programming skills to use. Shockingly, they failed to sell a single one. Read on to be dumbfounded by how ahead of (and out of touch with) its time the Honeywell Kitchen Computer was. Wired delves into the history of the device, including how difficult it was to use: Now try to imagine all that in late 1960s kitchen. A full H316 system wouldn’t have fit in most kitchens, says design historian Paul Atkinson of Britain’s Sheffield Halam University. Plus, it would have looked entirely out of place. The thought that an average person, like a housewife, could have used it to streamline chores like cooking or bookkeeping was ridiculous, even if she aced the two-week programming course included in the $10,600 price tag. If the lady of the house wanted to build her family’s dinner around broccoli, she’d have to code in the green veggie as 0001101000. The kitchen computer would then suggest foods to pair with broccoli from its database by “speaking” its recommendations as a series of flashing lights. Think of a primitive version of KITT, without the sexy voice. Hit up the link below for the full article. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • How do I get Unity working again after installing the wrong video driver?

    - by Jesse
    First off I did something stupid. I downloaded a Nvidia driver even though I have an integrated chipset. After installation my unity was still working. However, when I restarted my computer I got an error message saying that I can't run unity. I uninstalled the Nvidia driver. I restarted my computer. Unity still does not work. In the terminal I type "unity" and everything looks okay until I get three error messages that say this: Xlib: extension "GLX" missing on display ":0.0". followed by: Compiz (opengl) - Fatal: glXCreateContext failed Compiz (bailer) - Info: Ensuring a shell for your session jesse@jesse-PC:~$ Cannot register the panel shell: there is already one running.

    Read the article

  • Getting .deb package dependencies for an offline Ubuntu computer through Windows

    - by user109500
    Basically I want to "batch" download a .deb file and all its dependencies at once on a Windows 7 machine (of which I do not have admin access, it is a public computer.) I've seen plenty of Ubuntu based fixes that require terminal and apt, I'm asking how to do this on Windows. (I am not sure if this question fits here but I haven't found anywhere else that it could go.) I've tried Keryx and Sushi-huh to try to get packages and their dependencies but these both require Python, Python can't be normally installed without admin permission. (Side note, I think I've seen programs bundle python so they can work without installing it to c:, is this possible as a workaround? Google isn't helping) If anyone wants to know I'm trying to download Krita and Blender for Ubuntu 12.10/AMD64 I have been able to manually download single .deb files and dependencies upwards to 38 dependent packages, but then those 38 packages depend on other packages, It's maddening to not have some way to automatically do this on Windows. *Edit Sorry I forgot to make it clear that my personal home computer is running Ubuntu 12.10 and the public computer I'm using to download is Windows 7

    Read the article

  • computer shows up twice, connection unknown

    - by Thomas G. Seroogy
    added two computers to Ubuntu One. One machine is windows. The windows version seems to work fine, and I started syncing a folder by placing it into the Ubuntu One folder. All files and folders are visible when I go to my account online. On Ubuntu machine. I selected to sync the Download folder. Shortly thereafter, I realized that one folder exceeded my storage max. I tried to un-sync the folder, but Ubuntu One and the Stop Syncing This Folder were not visible in the menu. Per Ubuntu instructions, I removed my Ubuntu computer from the list of syncing computers. Per Ubuntu instructions, I re-added the Ubuntu computer. However, I find that two computers by the same name are added on both the desktop app and on the web. Plus, I the connection is "unknown." I have removed and re-added the computer several times with the same results. In all cases, I remove the computers using the Ubuntu One desktop app, then removing them from my account on the web, removing the Ubuntu One password, and restart the Ubuntu One app. Problem remains. Thanks in advance for any replies and help.

    Read the article

  • Anti aliasing problem

    - by byronyasgur
    I am auditioning fonts on google web fonts and one that I was discounting was Ubuntu because it looked a bit jagged ( screenshot below taken straight from google); however afterward I read an article where it was mentioned as a good choice, and there was a screenshot where it looked really good ( to me anyway ). I am using windows 7 and have tried looking at it in chrome and firefox. I notice the same thing with some other fonts but this one is a good example because it looks perfect in the screenshot but not so good when I look at it on their site. I know this essentially is a question about setting my computer, but I thought that this would be the best place to pose the question: Is there something wrong with the settings on my machine seeing as it's obviously not showing the font the same on my computer as it did when the article writer downloaded it and used it in an image. The screenshot from Google ... The screenshot from the article above ...

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >